Scribd
Upload
3K views3 pages

CBSE CLASS XII Physics Activity 2

1. The document describes an experiment to draw and correct circuit diagrams with various electrical components like a battery, resistor, rheostat, key, ammeter, and voltmeter. 2. Students are instructed to analyze circuits diagrams with incorrect connections, mark the incorrectly connected components, draw the circuits correctly, and verify the corrected circuits are functional. 3. Precautions for connecting the circuits correctly include cleaning wire ends, connecting the positive battery terminal to the positive voltmeter and ammeter terminals, and connecting the ammeter in series and voltmeter in parallel with the resistor.

Uploaded by

Aritra Roy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views3 pages

CBSE CLASS XII Physics Activity 2

1. The document describes an experiment to draw and correct circuit diagrams with various electrical components like a battery, resistor, rheostat, key, ammeter, and voltmeter. 2. Students are instructed to analyze circuits diagrams with incorrect connections, mark the incorrectly connected components, draw the circuits correctly, and verify the corrected circuits are functional. 3. Precautions for connecting the circuits correctly include cleaning wire ends, connecting the positive battery terminal to the positive voltmeter and ammeter terminals, and connecting the ammeter in series and voltmeter in parallel with the resistor.

Uploaded by

Aritra Roy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Activity 2

(This content should be on Ruled side with blue pen)


Aim:
To draw the diagram of given open circuit comprising at least a battery, resistor/rheostat, key,
ammeter and voltmeter. Mark the components that are not connected in proper order and
correct the circuit and also the circuit diagram.

Apparatus:
A given open circuit comprising at-least a cell or a battery, plug key, resistor, rheostat,
ammeter, voltmeter, connecting wires and sand paper.

Principle:
An electrical circuit is functional only if all the components of the circuit are connected in
proper order, assuming that all circuit components/devices are in working condition and key
is closed.
An open circuit means a break in some part of a circuit which could be deliberate such as a
key in open position or a fault such as broken wire or burnt-out component(s) or loose
connection. Some of such circuits are given in Figs. (a), (b), (c) and (d).

Procedure:
1. Draw the circuit diagrams in your notebook as given by your teacher [Fig. (a), (b), (c)
and (d)].
2. Consider one circuit and mark in Table A 2.1, the various components which have not
been connected in proper order.
3. Draw the correct circuit diagram.
4. Connect the electrical components according to corrected circuit diagram.
5. Close the key in the circuit to verify if the corrected circuit is functional.

Note: Rheostat can be used both as a variable resistance and potential divider.

Rheostat as a variable resistance


1. Draw a diagram as given in Fig. A 2.2 (a) showing use of a rheostat as a variable
resistor.
2. Connect the terminals of rheostat as drawn below using one end terminal and the
other variable terminal.
Result:
The electrical circuit assembled as per the corrected circuit diagram is functional.

Precautions:
1. Ends of the connecting wires should be cleaned with sand paper before making
connections.
2. 2. The positive terminal of the battery should be connected to the positive terminal of
the voltmeter and positive terminal of the ammeter.
3. The ammeter should be connected in series with the resistor and the voltmeter should
be connected in parallel with it.
(This content on blank side of your journal. All drawings with pencil, Written work with pen)

(b)

Observations:

Sr. No Circuit Component Correct Connection Incorrect


connection.
1. Battery Yes
2. Resistor Yes
3. Rheostat Yes
4. Key Yes
5. Ammeter Yes
6. Voltmeter Yes

You might also like