15.

From the following information, calculate various overhead variances:

Budget` Actual
Output in units 12,000 14,000
Number of working days 20 22
Fixed Overheads 36,000 49,000
Variable Overheads 24,000 35,000
There was an increase of 5% in Capacity.

(Total Overhead cost Variance: Rs.14,000 (A), Variable Overhead Variance: Rs.
7,000 (A), Fixed Overhead Variance: Rs.7000 (A),Expenditure Variance: Rs.
13,000 (A), Volume Variance: Rs.6000 (F), Capacity Variance: Rs.1,800 (F),
Calendar Variance: Rs.32,780 (F), Efficiency Variance: Rs.420 (F)

Unit III

Lesson I

Marginal Costing – Basic Concepts

Structure of the Lesson:

The lesson is structured as follows:

Introduction

Definition

Features of Marginal Costing

Assumptions in Marginal Costing

Characteristics of Marginal Costing

Advantages of Marginal Costing

Limitations of Marginal Costing

Marginal Costing and Absorption Costing

Distinction between Absorption Costing and Marginal Costing

Differential Costing

Marginal Cost

Features of Marginal Cost

Marginal Cost Statement

Marginal Cost Equation

Contribution:

Profit / Volume Ratio

Angle of incidence:

Profit goal:

Operating leverage

Objectives of the Lesson:

On completion of this lesson, you should be able to define and explain the
following concepts:

 Marginal Costing

 Absorption Costing or Full Cost Costing

 Differential Costing

 Marginal Cost
 Fixed Cost

 Variable Cost

 Contribution

 P / V ratio

 Margin of Safety

 Angle of Incidence

Introduction

By analyzing the behaviour of costs in relation to changes in volume of output it

becomes evident that there are some items of costs which tend to vary directly
with the volume of output, whereas there are others which tend to vary with
volume of output, are called variable cost and those remain unaffected by
change in volume of output are fixed cost or period costs.

Marginal costing is a study where the effect on profit of changes in the volume
and type of output is analysed. It is not a method of cost ascertainment like job
costing or contract costing. It is a technique of costing oriented towards
managerial decision making and control.

Marginal costing, being a technique can be used in combination with other

technique such as budgeting and standard costing. It is helpful in determining
the profitability of products, departments, processes, and cost centres. While
analyzing the profitability, marginal costing interprets the cost on the basis of
nature of cost. The emphasis is on behaviour of costs and their impact on
profitability.
Definition

Marginal costing is defined by the ICWA, India as “the ascertainment of

marginal costs and of the effect on profit of changes in volume or type of output
by differentiating between fixed costs, and variable costs”

Batty defined Marginal Costing as, “a technique of cost accounting which pays
special attention to the behaviour of costs with changes in the volume of output”

Kohler‟s Dictionary for Accounting defines Marginal Costing “as the

ascertainment of marginal or variable costs to an activity department or
products as compared with absorption costing or direct costing”

The method of charging all the costs to production is called absorption costing.
Kohler‟s dictionary for Accountants defines it as “the process of allocating all
or a portion of fixed and variable production costs to work – in – process, cost
of sales and inventory”. The net profits ascertained under this system will be
different from that under marginal costing because of

 Difference in stock valuation

 Over and under – absorbed overheads

Direct costing is defined as the process of assigning costs as they are incurred
to products and services

Features of Marginal Costing

The following are the special features of Marginal Costing:

 Marginal costing is a technique of working of costing which is used in

conjunction with other methods of costing (Process or job)

 Fixed and variable costs are kept separate at every stage. Semi –
Variable costs are also separated into fixed and variable.
 As fixed costs are period costs, they are excluded from product cost or
cost of production or cost of sales. Only variable costs are considered as
the cost of the product.

 As fixed cost is period cost, they are charged to profit and loss account
during the period in which they incurred. They are not carried forward to
the next year‟s income.

 Marginal income or marginal contribution is known as the income or

profit.

 The difference between the contribution and fixed costs is the net profit or
loss.

 Fixed costs remains constant irrespective of the level of activity.

 Sales price and variable cost per unit remains the same.

 Cost volume profit relationship is fully employed to reveal the state of

profitability at various levels of activity.

Assumptions in Marginal Costing

The technique of marginal costing is based on the following assumptions:

1. All elements of costs can be divided into fixed and variable.

2. The selling price per unit remains unchanged at all levels of activity.

3. Variable cost per unit remains constant irrespective of level of output and
fluctuates directly in proportion to changes in the volume of output.

4. Fixed costs remain unchanged or constant for the entire volume of

production.

5. Volume of product is the only factor which influences the costs.

 Characteristics of Marginal Costing

The essential characteristics and mechanism of marginal costing technique may

be summed up as follows:

1. Segregation of cost into fixed and variable elements: In marginal costing,

all costs are segregated into fixed and variable elements.

2. Marginal cost as product cost: Only marginal (variable) costs are charged
to products.

3. Fixed costs are period costs: Fixed cost are treated as period costs and are
charged to costing profit and loss account of the period in which they are
incurred.

4. Valuation of inventory: The work – in – progress and finished stocks are

valued at marginal cost only.

5. Contribution is the difference between sales and marginal cost: The

relative profitability of the products or departments is based on a study of
“contribution” made by each of the products or departments.

Advantages of Marginal Costing

Marginal costing is an important technique of managerial decision making.

It is a tool for cost control and profit planning. The following are the advantages
of marginal costing technique:

1. Simplicity

The statement propounded under marginal costing can be easily followed as it

breaks up the cost as variable and fixed.
2. Stock Valuation

Stock valuation cab be easily done and understood as it includes only the
variable cost.

3. Meaningful Reporting

Marginal costing serves as a good basis for reporting to management. The

profits are analyzed from the point of view of sales rather than production.

4. Effect on Fixed Cost

The fixed costs are treated as period costs and are charged to Profit and Loss
Account directly. Thus, they have practically no effect on decision making.

5. Profit Planning

The Cost – Volume Profit relationship is perfectly analysed to reveal efficiency

of products, processes, and departments. Break – even Point and Margin of
Safety are the two important concepts helpful in profit planning.

6. Cost Control and Cost Reduction

Marginal costing technique is helpful in preparation of flexible budgets as the

costs are classified into fixed and variable. The emphasis is laid on variable cost
for control. The constant focus is on cost and volume and their effect on profit
pave the way for cost reduction.

7. Pricing Policy

Marginal costing is immensely helpful in determination of selling prices under

different situations like recession, depression, introduction of new product, etc.
Correct pricing can be developed under the marginal costs technique with the
help of the cost information revealed therein.
8. Helpful to Management

Marginal costing is helpful to the management in exercising decisions regarding

make or buy, exporting, key factor and numerous other aspects of business
operations.

Limitations of Marginal Costing

Following are the limitations of marginal costing:

 Classification of Cost

Break up of cost into fixed and variable portion is a difficult problem. More
over clear cost division of semi – variable or semi – fixed cost is complicated
and cannot be accurate.

 Not Suitable for External Reporting

Since fixed cost is not included in total cost, full cost is not available to
outsiders to judge the efficiency.

 Lack of Long – term Perspective

Marginal costing is most suitable for decision making in a short term. It

assumes that costs are classified into fixed and variable. In the long term all the
cost are variable. Therefore it ignores time element and is not suitable for long
term decisions.

 Under Valuation of Stock

Under marginal costing only variable costs are considered and the output as
well as stock are undervalued and profit is distorted. When there is loss of stock
the insurance cover will not meet the total cost.
 Automation

In these days of automation and technical advancement, huge investments are

made in heavy machinery which results in heavy amount of fixed costs.
Ignoring fixed cost in this context for decision making is irrational.

 Production Aspect is Ignored

Marginal costing lays too much emphasis on selling function and as such
production aspect has been considered to be less significant. But from the
business point of view, both the functions are equally important.

 Not Applicable in all Types of Business

In contract type and job order type of businesses, full cost of the job or the
contract is to be charged. Therefore it is difficult to apply marginal costing in all
these types of businesses.

 Misleading Picture

Each product is shown at variable cost alone, thus giving a misleading picture
about its cost.

 Less Scope for Long – term Policy Decision

Since cost, volume, and profits are interlinked in price determination, which can
be changed constantly, development of long term pricing policy is not possible.

Marginal Costing and Absorption Costing

Absorption costing charges all the costs i.e., both the fixed and variable fixed to
the products, jobs, processes, and operations. Marginal costing technique
charges variable cost. Absorption is not any specific method of costing. It is
common name for all the methods where the total cost is charged to the output.
Absorption Costing is defined by I.C.M.A, England as “the practice of charging
all costs, both fixed and variable to operations, processes, or products”

From this definition it is inferred that absorption costing is full costing. The full
cost includes prime cost, factory overheads, administration overheads, selling
and distribution overheads.

Distinction between Absorption Costing and Marginal Costing

Absorption Costing Marginal Costing

1. Total cost technique is the practice 1. Marginal costing charges only
variable cost to products, process, or
of charging all cost, both variable and
operations and excludes fixed cost
fixed to operations, process or products. entirely.
2. It values stock at the cost which 2. It values stock at total variable cost
includes fixed cost also. only. This results in higher value of
stock under absorption costing than in
3. It is guided by profit which is the marginal costing.
excess of sales over the total costs in 3. It focuses its attention on
solving managerial problems
Contribution which is excess of sales
4. In total cost technique, there is a over variable cost.
problem of apportionment of fixed 4. It excludes fixed cost. Therefore,
there is no question of arbitrary
costs which may result in under or over apportionment.
recovery of expenses.

The difference between marginal costing and absorption costing is shown with
the help of the following examples.
Illustration No: 1 Cost of Production
(10000 units)
Per Unit Total
(Rs. P) (Rs)
Variable cost 1.50 15000
Fixed Cost 0.25 2500
---------
Total cost 17500
---------
Sales 5000 units at Rs. 2.50 per unit Rs. 125000
Closing stock 5000 units at Rs. 1.75 Rs. 8750
Solution:

Under absorption costing, the profit will be calculated as follows:

Rs.
Sales 12500
Closing stock 8750
-----------
21250
Less: Total cost 17500
-----------
Profit 3750
----------
Under marginal costing method, the profit will be calculated as follows:
Rs.
Sales 12500
Less: Marginal
Cost of 5000 units (5000 X 1.50) 7500
-----------
5000
Less: Fixed cost 2500
-----------
Profit 2500
----------
Closing stock will be valued at Rs.7500 only at marginal cost.
Illustration No: 2
The monthly cost figures for production in a manufacturing company are as
under:
Rs.
Variable cost 120000
Fixed cost 35000
-------------
Total cost 155000
-------------
Normal monthly sales is Rs. 200000/-. Actual sales figures for the three separate
months are:

Ist Month IInd Month IIIrd Month

Rs. 200000 Rs. 165000 Rs. 235000

If marginal cost is not used, stocks would be valued as follows:

Ist Month IInd Month IIIrd Month

Opening Stock Rs. 108500 Rs. 108500 Rs. 135625

Closing Stock Rs. 108500 Rs. 135625 Rs. 108500

Prepare two tabulations side by side to summarize these results for each of the
three months basing one tabulation on marginal costing theory and the other
tabulation along side on absorption cost theory.

Solution:

Marginal Costing Absorption Costing

Ist IInd IIIrd Ist IInd IIIrd
Month Month Month Month Month
Month
Opening
Stock ( Rs) 84000 84000 105000 108500 108500 135625
Variable
Cost ( Rs) 120000 120000 120000 120000 120000 120000
Fixed
Cost ( Rs) - - - 35000 35000 35000
Total ( Rs) 204000 204000 225000 263500 263500 290625
Less:
Closing 84000 105000 84000 108500 135625 108500
Stock
(Rs.)
Cost of
Sales (A) 120000 99000 141000 155000 127875 182125

Sales (B) 200000 165000 235000 200000 165000 235000

 Contribution
(B – A) 80000 66000 94000 45000 37125 52875
Less:
Fixed
Cost (Rs) 35000 35000 35000 - - -
Profit ( Rs) 45000 31000 59000 45000 37125
52875

Note: Stocks at marginal cost is based on variable portion of the monthly total
cost given as follows:

120000
Marginal cost in Rs.108500 = 108500 X ------------- = Rs. 84000
155000

120000
Marginal costs in Rs. 135625 = 135625 X ----------- = Rs. 105000
155000

Differential Costing

The concept of differential cost is a relevant cost concept in those decision

situations which involve alternative choices. It is the difference in the total costs
of two alternatives. This helps in decision making. It can be determined by
subtracting the cost of one alternative from the cost of another alternative.
Differential costing is the change in the total cost which results from the
adoption of an alternative course of action. The alternative may arise on account
of sales, volume, price change in sales mix, etc decisions. Differential cost
analysis leads to more correct decisions than more marginal costing analysis. In
this technique the total costs are considered and not the cost per unit.
Differential costs do not form part of the accounting system while marginal
costing can be adapted to the routine accounting itself. However, when
decisions involve huge amount of money differential cost analysis proves to be
useful.

In the illustration given below, differential cost at levels of activity has been
shown:

Alternative I Alternative II Differential cost

Activity level 80% 100%
Sales (Rs) 80000 100000 20000
-----------------------------------------------------
Direct materials 40000 50000 10000
Direct labour 16000 20000 4000
Variable overheads 4000 5000 1000
Fixed overheads 3000 3000 -
------------------------------------------------------
Cost of sales 63000 78000 15000
------------------------------------------------------
Differential cost is generally confused with marginal cost. Of course, these two
techniques are similar in some aspects but these also differ in certain other
respects.
Similarities

(i) Both the differential cost analysis and marginal cost analysis are based on
the classification of cost into fixed and variable. When fixed costs do not
change, both differential and marginal costs are same.

(ii) Both are the techniques of cost analysis and presentation and are used by the
management in formulating policies and decision making.

Dissimilarities

(i) Marginal cost may be incorporated in the accounting system where as

differential cost are worked out for reporting to the management for taking
certain decisions.

(ii) Entire fixed cost are excluded from costing where as some of the relevant
fixed costs may be included in the differential cost analysis.

(iii)In marginal costing, contribution and p/v ratio are the main yardstick for
evaluating performance and decision making. In differential cost analysis
emphasis is made between differential cost and incremental or decremental
revenue for making policy decisions.

(iv) Differential cost analysis may be used in absorption costing and marginal
costing.

Marginal Cost

Marginal cost is the cost of producing one additional unit of output. It is the
amount by which total cost increases when one extra unit is produced or the
amount of cost which can be avoided by producing one unit less.

The ICMA, England defines marginal cost as, “the amount of any given volume
of output by which the aggregate cost are charged if the volume of output is
increased or decreased by one unit”.
In practice, this is measured by the total cost attributable to one unit. In this
context, a unit may be single article, a batch of articles, an order, a stage of
production, a process etc., often managerial costs, variable costs are used to
mean the same.

Features of Marginal Cost

 It is usually expressed in terms of one unit.

 It is charged to operation, processes, or products.

 It is the total of prime cost plus variable overheads of one unit.

Marginal Cost Statement

In marginal costing, a statement of marginal cost and contribution is prepared to

ascertain contribution and profit. In this statement, contribution is separately
calculated for each of the product or department. These contributions are totaled
up to arrive at the total contribution. Fixed cost is deducted from the total
contribution to arrive at the profit figure. No attempt is made to apportion fixed
cost to various products or departments.

Marginal Cost Equation

For convenience the element of cost statement can be written in the form of an
equation as given below:

Sales – Variable Cost = Fixed Cost plus or minus Profit or Loss.

Or

Sales – Variable Cost = Fixed Cost plus or minus Profit or Loss

In order to make profit, contribution must be more than fixed cost and to avoid
loss, contribution should be equal to fixed cost.

The above equation can be illustrated in the form of a statement.

 Marginal Cost Statement
Rs.
Sales xxxxx
Less: Variable Cost (xxxx)
------------
Contribution xxxxx
Less: Fixed Cost (xxxx)
-------------
Profit / Loss xxxx
------------
Illustration No.3:

A company is manufacturing three products X, Y and Z. It supplies you the

following information:

Products
--------------------------------------------
X Y Z
(Rs) (Rs) (Rs)
Direct Materials 2500 10000 1000
Direct Labour 3000 3000 500
Variable Overheads 2000 5000 2500
Sales 10000 20000 5000

Total fixed overheads Rs. 3000/-

Prepare a marginal cost statement and determine profit and loss.

Solution:
Marginal Cost Statement
Products
----------------------------------------------------------
X Y Z Total
(Rs) (Rs) (Rs) (Rs)
Sales (A) 10000 20000 5000 35000
------------------------------------------------------------
Direct materials 2500 10000 1000 13500
Direct Labour 3000 3000 500 6500
Variable Overheads 2000 5000 2500 9500
------------------------------------------------------------
Marginal Cost (B) 7500 18000 4000 29500
------------------------------------------------------------
Marginal Contribution
(A – B) 2500 2000 1000 5500
Less:FixedCost 3000
--------
NetProfit 2500
--------
Contribution:

Contribution is the difference between selling price and variable cost of one
unit. The greater contribution from the selling unit indicates that the variable
cost is less compared to selling price. Total contribution is the number of units
multiplied by contribution per unit. Contribution will be equal to the total fixed
costs at break even point where profit is zero.

Illustration No.4:

Calculate contribution and profit from the following details:

Sales Rs. 12000

Variable Cost Rs. 7000

Fixed Cost Rs. 4000

Solution:

Contribution = Sales – Variable cost

Contribution = Rs. 12000 – Rs. 7000 = Rs. 5000

Profit = Contribution – Fixed Cost

Profit = Rs. 5000 – Rs. 4000 = Rs. 1000

Profit / Volume Ratio

This is the ratio of contribution to sales. It is an important ratio analysing the

relationship between sales and contribution. A high p/v ratio indicates high
profitability and low p/v ratio indicates low profitability. This ratio helps in
comparison of profitability of various products. Since high p/v ratio indicates
high profits, the objective of every organisation should be to improve or
increase the p/v ratio.
 P / V Ratio = Contribution / Sales x 100 or C / S x 100
(Or)
Fixed Cost + Profit
-----------------------
Sales
(Or)
Sales – Variable Cost
-------------------------
Sales

When profits and sales for two consecutive periods are given, the following
formula can be applied: Change in Profit
--------------------
Change in Sales

P / V ratio is also used in making the following type of calculations:

a) Calculation of Break even point.

b) Calculation of profit at a given level of sales.

c) Calculation of the volume of sales required to earn a given profit.

d) Calculation of profit when margin of safety (discussed below) is given.

e) Calculation of the volume of sales required to maintain the present level of

profit if selling price is reduced.

Margin of safety:

The excess of actual or budgeted sales over the break-even sales is known as the
margin of safety.

Margin of safety = actual sales - break-even sales

So this shows the sales volume which gives profit. Larger the margin of safety
greater is the profit.

Budget sales - break-even sales

Margin of safety ratio = ----------------------------
Budget sales

(Or)

Profit
----------
P/V Ratio

When margin of safety is not satisfactory, the following steps may be taken into
account:

a) Increase the volume of sales.

b) Increase the selling price.
c) Reduce fixed cost.
d) Reduce variable cost.
e) Improve sales mix by increasing the sale of products with
P/V ratio.
The effect of a price reduction will always reduce the P / V ratio, raise the break
– even point shorten the margin of safety.

Angle of incidence:

This is obtained from the graphical representation of sales and cost. When sales
and output in units are plotted against cost and revenue the angle formed
between the total sales line and the total cost line at the break-even point is
called the angle of incidence.
Large angle indicates a high rate of profit while a narrow angle would show a
relatively low rate of profit.

Profit goal:

To earn a desired amount of profit i.e., a profit goal can be reached by the
formula given below

Fixed cost + Desired profitability

Sales volume to reach profit goal = --------------------------------
Contribution ratio

If the profit goal is stated in terms of profit after taxes

Fixed cost + {(desired after-tax

profit)/1-tax rate}
Sales volume to reach profit goal = --------------------------------
Contribution ratio

Operating leverage: An important concept in context of the CVP analysis is

the operating leverage. This refers to the use of the fixed costs in the operation
of a firm, and it accentuates fluctuations in the firm's operating profit due to
change in sales. Thus the degree of operating leverage may be defined as the
percentage change in operating profit (earning before interest and tax) on
account of a change in sales.
 % Change in operating profit
Degree of Leverage DOL= --------------------------------------
% Change in sales
(Or)

Change in EBIT
-------------
EBIT
Degree of Leverage DOL= --------------------------------------
Change in sales
------------
Sales
Test Yourself:

1. What is marginal costing? What are its main features?

2. Define marginal cost?

3. What is absorption costing?

4. State the differences between absorption costing and marginal costing.

5. State the limitations of marginal costing.

6. What is contribution? What are the uses of contribution to management?

7. What is margin of safety? How is it calculated?

8. What is angle of incidence? What does it indicate?

9. What are the advantages and disadvantages of marginal costing?

Problems

1. The selling price of a particular product is Rs.100 and the marginal cost is
Rs.65. During the month of April, 800 units produced of which 500 were sold.
There was no opening at the commencement of the month. Fixed costs
amounted to Rs. 18000. Provide a statement using a) Marginal costing and b)
Absorption costing, showing the closing stock valuation and the profit earned
under each principle.

2. From the following information, calculate the amount of contribution and

profit.

Rs.
Sales 1000000
Variable cost 600000
Fixed cost 150000

3. Determine the amount of fixed cost from the following.

Rs.
Sales 300000
Variable cost 200000
Profit 50000
4. Determine the amount of variable cost from the following.

Rs.
Sales 500000
Fixed cost 100000
Profit 100000
 References

1. Dr .S. Ganeson and Tmt. S. R. Kalavathi, Management Accounting,

Thirumalai Publications, Nagercoil.

2. T.S. Reddy and Y. Hari Prasad Reddy Management Accounting, Margam

Publications, Chennai.

3. Anthony, Robert: Management Accounting, Tarapore-wala, Mumbai.

Lesson II

Marginal Costing and CVP Analysis

Structure of the Lesson:

The lesson is structured as follows:

 Introduction

 Break Even Chart

 Profit Volume Graph

 Cost-volume-profit relationship with the help of an example

 Basic Assumptions of Cost – Volume Profit Analysis

 Uses and limitations of Break even analysis

Objectives of the Lesson:

On completion of this lesson, you should be able;

 Explain CVP Analysis

 Know the construction of BEP chart

 Define BEP