C O A X I A L C A B L E S 6.

RG Coaxial and Triaxial Reference Guide

DS-3 and DS-4 Interconnect and Cross-Connect Cables
and Low Loss 50 Ohm Wireless RF Transmission Cables

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

DS-3 and DS-4 Interconnect and Cross-connect Cable

728A Type 9231 6.58 Belden 1/.031″ BC PE Inner PVC-NC .071 75 21.0 -40 to +60 1900
(9.9) (.198) None/98% SPC (.305)
(187.0)
Outer
None/95% BC
(1.1)
734A Type DS3-4 734A1 6.56 Belden 1/.032″ BC GIFHDPE BF/85% TC PVC .031 75 16.8 -40 to +75 300
(10.0) (.148) (2.4) (.235)
734A Type DS3-4 734A12 6.56 Belden 1/.032″ BC GIFHDPE BF/85% TC PVC .484 75 16.8 -40 to +75 300
Bundled 12-Coax (10.0) (.148) (2.4) (1.026)
734A Type DS3-4 734A1P 6.56 Belden 1/.032″ BC FFEP BF/85% TC FLM .032 75 17.3 0 to +75 300
Plenum (10.0) (.148) (2.4) (.215)
734A Type DS3-4 734A6 6.56 Belden 1/.032″ BC GIFHDPE BF/85% TC PVC .250 75 16.8 -45 to +75 300
Bundled 6-Coax (10.0) (.148) (2.4) (.772)
734D Type DS3-4 734D1 6.57 Belden 1/.032″ SPC GIFHDPE BF/85% TC PVC .031 75 16.8 -40 to +75 300
(10.0) (.148) (2.4) (.235)
734D Type DS3-4 734D12 6.57 Belden 1/.032″ SPC GIFHDPE BF/85% TC PVC .484 75 16.8 -40 to +75 300
Bundled 12-Coax (10.0) (.148) (2.4) (1.026)
734D Type DS3-4 734D1P 6.57 Belden 1/.032″ SPC FFEP BF/85% TC FLM .032 75 17.3 0 to +75 300
Plenum (10.0) (.148) (2.4) (.215)
734D Type DS3-4 734D1T 6.57 Belden 1/.032″ SPC GIFHDPE BF/85% TC PVC .034 75 16.8 -40 to +75 300
1-Coax with Tracer (10.0) (.148) (2.4) (.235 x .309)
734D Type DS3-4 734D2 6.57 Belden 1/.032″ SPC GIFHDPE BF/85% TC PVC .061 75 16.8 -40 to +75 300
Dual Coax (10.0) (.148) (2.4) (.235 x .485)
734D Type DS3-4 734D2T 6.57 Belden 1/.032″ SPC GIFHDPE BF/85% TC PVC .068 75 16.8 -40 to +75 300
2-Coax with Tracer (10.0) (.148) (2.4) (.235 x .574)
734D Type DS3-4 734D6 6.57 Belden 1/.032″ SPC GIFHDPE BF/85% TC PVC .250 75 16.8 -40 to +75 300
Bundled 6-Coax (10.0) (.148) (2.4) (.772)
735A Type DS3-4 735A1 6.55 Belden 1/.0159″ SPC FHDPE BF/93% TC PVC .011 75 17.7 -40 to +75 300
(41.0) (.077) (5.3) (.129)
735A Type DS3-4 735A12 6.55 Belden 1/.016″ SPC FHDPE BF/93% TC PVC .171 75 17.7 -40 to +75 300
Bundled 12-Coax (41.0) (.077) (5.3) (.581)
735A Type DS3-4 735A16 6.55 Belden 1/.016″ SPC FHDPE BF/93% TC PVC .226 75 17.7 -40 to +75 300
Bundled 16-Coax (41.0) (.077) (5.3) (.636)
735A Type DS3-4 735A1P 6.55 Belden 1/.016″ SPC FFEP BF/93% TC FLM .018 75 17.7 0 to +75 300
Plenum (41.0) (.077) (5.3) (.129)
735A Type DS3-4 735A1T 6.55 Belden 1/.016″ SPC FHDPE BF/93% TC PVC .013 75 17.7 -40 to +75 300
1-Coax with Tracer (41.0) (.077) (5.3) (.129 x .203)
735A Type DS3-4 73502T 6.55 Belden 1/.017″ SPC FHDPE BF/93% TC PVC .040 75 17.7 -40 to +75 300
2-Coax with Tracer (41.0) (.077) (5.3) (.179 x .308)
735A Type DS3-4 735A2 6.55 Belden 1/.016″ SPC FHDPE BF/93% TC PVC .022 75 17.7 -40 to +75 300
Dual Coax (41.0) (.077) (5.3) (.129 x .258)
735A Type DS3-4 735A24 6.55 Belden 1/.016″ SPC FHDPE BF/93% TC PVC .364 75 17.7 -40 to +75 300
Bundled 24-Coax (41.0) (.077) (5.3) (.870)
735A Type DS3-4 735A3 6.55 Belden 1/.016″ SPC FHDPE BF/93% TC PVC .045 75 17.7 -40 to +75 300
Bundled 3-Coax (41.0) (.077) (5.3) (.309)
735A Type DS3-4 735A6 6.55 Belden 1/.016″ SPC FHDPE BF/93% TC PVC .083 75 17.7 -40 to +75 300
Bundled 6-Coax (41.0) (.077) (5.3) (.399)
735A Type DS3-4 735A8 6.55 Belden 1/.016″ SPC FHDPE BF/93% TC PVC .111 75 17.7 -40 to +75 300
Bundled 8-Coax (41.0) (.077) (5.3) (.447)
735A Type DS3-4 735A9 6.55 Belden 1/.016″ SPC FHDPE BF/93% TC PVC .122 75 17.7 -40 to +75 300
Bundled 9-Coax (41.0) (.077) (5.3) (.484)
Low Loss 50 Ohm Wireless RF Transmission Cables
RF300 7809A 6.62 Belden 1/.072″ BC GIFHDPE DB/95% TC PE .046 50 23.0 -40 to +75 300
(2.1) (.190) (2.4) (.300)
RF300 7809R 6.62 Belden 1/.072″ BC GIFHDPE DB/95% TC PVC .046 50 23.0 -40 to +75 300
6 • Coaxial Cables

Riser (2.1) (.190) (2.4) (.300)

RF300 7809WB 6.62 Belden 1/.072″ BC GIFHDPE DB/95% TC PE .046 50 23.0 -40 to +75 300
Burial (2.1) (.190) (2.4) (.300)
RG-174/U Type 7805 6.59 Belden 1/.018″ BC PE BF/90% TC PVC .009 50 31.2 -40 to +75 1,100
RF100A (3.2) (.061) (9.1) (.110)
RG-174/U Type 7805R 6.59 Belden 1/.020″ BC FHDPE BF/93% TC PVC .010 50 26.2 -40 to +75 300
RF100LL (27.3) (.060) (9.3) (.110)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.4

RG Coaxial and Triaxial Reference Guide

Low Loss 50 Ohm Wireless RF Transmission Cables
and Microwave Conformable ® Coax

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

Low Loss 50 Ohm Wireless RF Transmission Cables (continued)

RG-58/U Type 7806A 6.60 Belden 1/.037″ BC GIFPE DF/90% TC PE .022 50 24.3 -40 to +75 300
RF195 (7.6) (.110) (4.2) (.195)
RG-58/U Type 7806R 6.60 Belden 1/.037″ BC GIFPE DF/90% TC PVC .026 50 24.3 -40 to +75 300
RF195 Riser (7.6) (.110) (4.2) (.195)
RG-58/U Type 7807A 6.60 Belden 1/.044″ BC GIFPE DF/95% TC PE .026 50 23.5 -40 to +75 300
RF200 (3.3) (.116) (4.2) (.195)
RG-58/U Type 7807R 6.60 Belden 1/.044″ BC GIFPE DF/95% TC PVC .029 50 23.5 -40 to +75 300
RF200 Riser (3.3) (.116) (4.2) (.195)
RG-8/X Type 7808A 6.61 Belden 1/.057″ BC GIFPE DB/95% TC PE .036 50 23.0 -40 to +75 300
RF240 (3.2) (.150) (3.5) (.240)
RG-8/X Type 7808R 6.61 Belden 1/.057″ BC GIFPE DB/95% TC PVC .040 50 23.0 -40 to +75 300
RF240 Riser (3.2) (.150) (3.5) (.240)
RG-8/X Type 7808WB 6.61 Belden 1/.057″ BC GIFPE DB/95% TC PE .036 50 23.0 -40 to +75 300
RF240 Burial (3.2) (.150) (3.5) (.240)
RF300 7809A 6.62 Belden 1/.072″ BC GIFPE DB/95% TC PE .046 50 23.0 -40 to +75 300
(2.0) (.190) (2.7) (.300)
RF300R 7809R 6.62 Belden 1/.072″ BC GIFPE DB/95% TC PVC .053 50 23.0 -40 to +75 300
Riser (2.0) (.190) (2.7) (.300)
RF300WB 7809WB 6.62 Belden 1/.072″ BC GIFPE DB/95% TC PE .046 50 23.0 -40 to +75 300
Burial (2.0) (.190) (2.7) (.300)
RG-8/U Type 7810A 6.63 Belden 1/.108″ BCCA GIFPE DB/95% TC PE .077 50 23.0 -40 to +75 300
RF400 (1.3) (.285) (1.8) (.405)
RG-8/U Type 7810R 6.63 Belden 1/.108″ BCCA GIFPE DB/95% TC PVC .087 50 23.0 -40 to +75 300
RF400 Riser (1.3) (.285) (1.8) (.405)
RG-8/U Type 7810WB 6.63 Belden 1/.108″ BCCA GIFPE DB/95% TC PE .077 50 23.0 -40 to +75 300
RF400 Burial (1.3) (.285) (1.8) (.405)
RF500 7976A 6.64 Belden 1/.142″ BCCA FHDPE DBII/90% TC PE .120 50 25.1 -40 to +80 300
Aerial (.8) (.370) (1.6) (.500)
RF500 7976R 6.64 Belden 1/.142″ BCCA FHDPE DBII/90% TC PVC .120 50 25.1 -40 to +80 300
Aerial (.8) (.370) (1.6) (.500)
RF500 7976WB 6.64 Belden 1/.142″ BCCA FHDPE DBII/90% TC PE .120 50 25.1 -40 to +80 300
Aerial (.8) (.370) (1.6) (.500)
RF600 7977A 6.65 Belden 1/.176″ BCCA FHDPE DBII/85% TC PE .163 50 24.6 -40 to +80 300
Aerial (.5) (.455) (1.8) (.590)
RF600 7977R 6.65 Belden 1/.176″ BCCA FHDPE DBII/85% TC PVC .163 50 24.6 -40 to +80 300
Aerial (.5) (.455) (1.8) (.590)
RF600 7977WB 6.65 Belden 1/.176″ BCCA FHDPE DBII/85% TC PE .163 50 24.6 -40 to +80 300
Aerial (.5) (.455) (1.8) (.590)
Microwave Conformable Coax
RG-401/U Type 1675A 6.73 Belden 1/.065″ SPCCS TFE CT None .081 50 29.6 -70 to +200 3,000
Conformable (2.5) (.210) (8.0) (.246)
RG-402/U Type 1673A 6.73 Belden 1/.036″ SPCCS TFE CT None .020 50 29.5 -70 to +200 1,900
Conformable (20.5) (.116) (4.5) (.138)
RG-402/U Type 1673B 6.73 Belden 1/.036″ SPC TFE CT None .020 50 29.5 -70 to +200 1,900
Conformable (7.9) (.116) (4.5) (.138)
RG-402/U Type 1673J 6.73 Belden 1/.036″ SPCCS TFE CT PVC .020 50 29.5 -40 to +105 1,900
Conformable Jacketed (20.5) (.116) (4.5) (.178)
RG-405/U Type 1671A 6.72 Belden 1/.020″ SPCCS TFE CT None .012 50 29.5 -70 to +200 1,500
Conformable (64.2) (.062) (10.2) (.085)
RG-405/U Type 1671B 6.72 Belden 1/.020″ SPC TFE CT None .012 50 29.5 -70 to +200 1,500
Conformable (25.7) (.062) (10.2) (.085)
RG-405/U Type 1671J 6.72 Belden 1/.020″ SPCCS TFE CT PVC .016 50 29.5 -40 to +105 1,500
Conformable Jacketed (64.2) (.062) (10.2) (.127)
M17/151 Type 1674A 6.72 Belden 1/.011″ SPCCS TFE CT None .004 50 29.5 -70 to +200 1,000
Conformable (205.0) (.034) (8.0) (.047)
M17/151 Type 1674B 6.72 Belden 1/.011″ SPCCS TFE CT None .004 50 29.5 -70 to +200 1,000
Conformable (81.2) (.034) (8.0) (.047)
75 Ohm 1672A 6.74 Belden 1/.011″ SCCCS TFE CT None .012 75 19.5 -70 to +200 1500
Conformable (205.0) (.062) (10.0) (.087)
75 Ohm 1672B 6.74 Belden 1/.011″ SPC TFE CT None .012 75 19.5 -70 to +200 1500
Conformable (11.0) (.062) (10.0) (.087)
75 Ohm 1672J 6.74 Belden 1/.011″ SCCCS TFE CT PVC .016 75 19.5 -40 to +105 1500
Conformable Jacketed (205.0) (.062) (10.0) (.127)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.5

RG Coaxial and Triaxial Reference Guide

Microwave Conformable ® Coax
and RG-6 Type

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

RG-6 Type
RG-6/U Type 1152A 6.25 Belden, IBM 1/.040″ BCCS FFEP DF/60% TC FEP .048 75 16.5 -70 to +200 300
Plenum P/N1501919 (28.0) (.170) DF/40% TC (.273)
(1.8)
RG-6/U Type 1189A 6.24 Belden 1/.040″ BCCS GIFPE DBIV, 60% AL PVC .032 75 16.2 -40 to +80 300
(28.0) (.180) 40% AL (.298)
(4.8)
RG-6/U Type 1189AP 6.24 Belden 1/.040″ BCCS FFEP DBIV/60% AL FLM .039 75 16.3 -20 to +75 300
Plenum (28.0) (.170) 40% AL (.248)
(4.8)
RG-6/U Type 1190A 6.25 Belden 1/.040″ BCCS GIFPE DBIV/60% AL PE .029 75 16.2 -55 to +80 300
Burial (28.0) (.180) 40% AL (.298)
(4.8)
RG-6/U Type 1191AM 6.24 Belden 1/.040″ BCCS GIFPE DBIV/60% AL PVC .040 75 16.2 -40 to +80 300
Messengered (28.0) (.180) 40% AL (.298 x .433)
(4.8)
RG-6/U Type 1258AM 6.19 Belden 1/.040″ BCCS GIFPE DBII/60% AL PVC .042 75 16.2 -40 to +80 300
Messengered (28.0) (.180) (9.0) (.270 x .410)
RG-6/U Type 1260AM 6.23 Belden 1/.040″ BCCS GIFPE DB+/77% AL PVC .042 75 16.2 -40 to +80 300
Messengered (28.0) (.180) (5.6) (.275 x .416)
RG-6/U Type 1322R 6.24 Belden 1/.040″ BCCS GIFPE DBIV/60% AL PVC .035 75 16.2 -40 to +80 300
(28.0) (.180) 40% AL (.298)
(4.8)
RG-6/U Type 1360SB 6.39 Belden 1/.040″ BC FFEP 95% BC LSZH .076 75 16.3 -30 to +75 300
Composite (w/PowerPair) (6.4) (.180) (3.1) (.275 x .514)
RG-6/U Type 1530A 6.20 Belden 1/.040″ BCCS GIFPE DBII/90% AL PVC .029 75 16.2 -40 to +80 300
(28.0) (.180) (5.0) (.270)
RG-6/U Type 1530AP 6.20 Belden 1/.040″ BCCS FFEP DBII/90% AL FLM .027 75 16.3 -20 to +75 300
Plenum (28.0) (.170) (5.0) (.235)
RG-6/U Type 1531AM 6.20 Belden 1/.040″ BCCS GIFPE DBII/90% AL PVC .044 75 16.2 -40 to +80 300
Messengered (28.0) (.180) (5.0) (.270 x .410)
RG-6/U Type 1532A 6.20 Belden 1/.040″ BCCS GIFPE DBII/90% AL PE .024 75 16.2 -55 to +80 300
Burial (28.0) (.180) (5.0) (.270)
RG-6/U Type 1545A 6.19 Belden 1/.040″ BCCS GIFPE DBII/60% AL PVC .030 75 16.2 -40 to +80 300
(28.0) (.180) (9.0) (.270)
RG-6/U Type 1546A 6.21 Belden 1/.040″ BCCS GIFPE DBIII/60% AL PVC .029 75 16.2 -40 to +80 300
(28.0) (.180) (6.5) (.278)
RG-6/U Type 1613A 6.22 Belden 1/.040″ BCCS GIFPE DBIII/77% AL PVC .030 75 16.2 -40 to +80 300
(28.0) (.180) (5.6) (.278)
RG-6/U Type 1614A 6.22 Belden 1/.040″ BCCS GIFPE DBIII/77% AL PE .024 75 16.2 -55 to +80 300
Burial (28.0) (.180) (5.6) (.275)
RG-6/U Type 1615AM 6.22 Belden 1/.040″ BCCS GIFPE DBIII/77% AL PVC .043 75 16.2 -40 to +80 300
Messengered (28.0) (.180) (5.6) (.275 x .416)
RG-6/U Type 1616AM 6.22 Belden 1/.040″ BCCS GIFPE DBIII/77% AL PVC .045 75 16.2 -40 to +80 300
Messengered (28.0) (.180) (5.6) (.275 x .416)
RG-6/U Type 1694A 6.44 Belden 1/.040″ BC GIFHDPE DF/95% TC PVC .040 75 16.2 -20 to +75 300
Digital Video (6.4) (.180) (2.8) (.275)
RG-6/U Type 1694SB 6.44 Belden 1/.040″ BC FFEP DF/95% TC FLM .045 75 16.2 -30 to +75 300
Digital Video (6.4) (.170) (2.8) (.234)
RG-6/U Type 1695A 6.44 Belden 1/.040″ BC FFEP DF/95% TC FLM .033 75 16.2 -40 to +80 300
Plenum (6.4) (.170) (2.8) (.234)
RG-6/U Type 1829A 6.31 Belden 1/.040″ BCCS GIFPE DBII/60% AL PVC .030 75 16.2 -40 to +80 300
(28.0) (.180) (9.0) (.270)
RG-6/U Type 1829AC 6.31 Belden 1/.040″ BCAC GIFPE DBII/60% AL PVC .030 75 16.2 -30 to +75 300
(6.4) (.180) (9.0) (.270)
RG-6/U Type 1829B 6.31 Belden 1/.040″ BCCS GIFPE DBII/60% AL PE .024 75 16.2 -55 to +80 300
Burial (28.0) (.180) (9.0) (.270)
RG-6/U Type 1829BC 6.31 Belden 1/.040″ BCAC GIFPE DBII/60% AL PE .024 75 16.2 -55 to +80 300
Burial (6.4) (.180) (9.0) (.270)
6 • Coaxial Cables

RG-6/U Type 1829P 6.31 Belden 1/.040″ BCCS GIFPE DBII/60% AL FLM .027 75 16.3 -20 to +75 300
Plenum (28.0) (.180) (9.0) (.235)
RG-6/U Type 1829R 6.31 Belden 1/.040″ BCCS GIFPE DBII/60% AL PVC .029 75 16.2 -40 to +80 300
(28.0) (.180) (9.0) (.270)
RG-6/U Type 1837A 6.21 Belden 1/.040″ BCCS GIFPE DBIII/60% AL PE .024 75 16.2 -55 to +80 300
Burial (28.0) (.180) (6.5) (.275)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.6

RG Coaxial and Triaxial Reference Guide

RG-6 Type

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

RG-6 Type (continued)

RG-6/U Type 1839A 6.32 Belden 1/.040″ BCCS GIFPE DBII/60% AL PVC .040 75 16.2 -40 to +80 300
Static Ground (28.0) (.180) (9.0) (.270 x .405)
RG-6/U Type 1839AC 6.32 Belden 1/.040″ BCAC GIFPE DBII/60% AL PVC .040 75 16.2 -40 to +80 300
Static Ground (6.4) (.180) (9.0) (.270 x .405)
RG-6/U Type 1840A 6.32 Belden 2/.040″ BCAC GIFPE DBII/60% AL PVC .069 75 16.2 -40 to +80 300
Static Ground (28.0) (.180) (9.0) (.273 x .703)
RG-6/U Type 1840AC 6.32 Belden 2/.040″ BC GIFPE DBII/60% AL PVC .069 75 16.2 -40 to +80 300
Static Ground (6.4) (.180) (9.0) (.273 x .703)
RG-6/U Type 1841A 6.32 Belden 2/.040″ BCCS GIFPE DBII/60% AL PVC .058 75 16.2 -40 to +80 300
(28.0) (.180) (9.0) (.273 x .595)
RG-6/U Type 1841AC 6.32 Belden 2/.040″ BCAC GIFPE DBII/60% AL PVC .058 75 16.2 -40 to +80 300
(6.4) (.180) (9.0) (.273 x .595)
RG-6/U Type 1843A 6.33 Belden 1/.040″ BCCS GIFPE DBII/60% AL PE .052 75 16.2 -55 to +80 300
Burial (28.0) (.180) (9.0) (.273 x .750)
RG-6/U Type 3131A 6.84 Belden 1/.040″ BCCS FPE DBIV/67% AL PVC .033 75 16.2 -30 to +75 3000
(28.0) (.180) 46% AL (.300)
(3.6)
RG-6/U Type 3132A 6.84 Belden 1/.040″ BCCS FFPE DBIV/67% AL PVDF .043 75 16.3 -20 to +150 300
(28.0) (.170) 46% AL (.274)
(7.2)
RG-6/U Type 5339G5 6.21 Belden 1/.040″ BCCS GIFPE BB/50% AL PVC .024 75 16.2 -40 to +80 300
(28.0) (.180) (15.0) (.253)
RG-6/U Type 7915A 6.33 Belden 1/.040″ BC GIFPE DB+/77% AL PVC .029 75 16.2 -40 to +80 300
(6.4) (.180) (4.6) (.275)
RG-6/U Type 7916A 6.33 Belden 1/.040″ BC GIFPE DBIV/60% AL PVC .032 75 16.2 -40 to +80 300
(6.4) (.180) 40% AL (.298)
(4.8)
RG-6/U Type 8215 6.38 Belden 1/.028″ BCCS PE None/96% BC PE .069 75 20.5 -55 to +80 2,700
(32.0) (.185) None/95% BC (.332)
(1.1)
RG-6/U Type 8238 6.39 JAN-C-17A 7/.048″ TC FRSFPE None/97% BC PVC .117 75 20.5 -40 to +80 300
(6.1) (.285) (1.2) (.405)
RG-6/U Type 8261 6.39 MIL-C-17D 7/.048″ TC PE None/97% BC PVC .104 75 20.5 -40 to +60 3,700
(6.1) (.285) (1.2) (.405)
RG-6/U Type 9058 6.23 Belden 1/.040″ BCCS GIFPE DB+/77% AL PVC .029 75 16.2 -40 to +80 300
(28.0) (.180) (5.6) (.275)
RG-6/U Type 9058M 6.23 Belden 1/.040″ BCCS GIFPE DB+/77% AL PVC .043 75 16.2 -40 to +80 350
Messengered (28.0) (.180) (5.6) (.275 x .416)
RG-6/U Type 9062 6.23 Belden 1/.040″ BCCS GIFPE DB+/77% AL PVC .023 75 16.2 -55 to +80 300
Burial (28.0) (.180) (5.6) (.275)
RG-6/U Type 9066 6.19 Belden 1/.040″ BCCS GIFPE DBII/60% AL PE .026 75 16.2 -55 to +80 300
Burial (28.0) (.180) (9.0) (.270)
RG-6/U Type 9077 6.19 Belden 2/.040″ BCCS GIFPE DBII/60% AL PVC .057 75 16.2 -40 to +80 300
(28.0) (.180) (9.0) (.270 x .590)
RG-6/U Type 9116 6.19 Belden 1/.040″ BCCS GIFPE DBII/60% AL PVC .030 75 16.2 -40 to +80 300
(28.0) (.180) (9.0) (.270)
RG-6/U Type 9116P 6.19 Belden 1/.040″ BCCS FFEP DBII/60% AL FLM .025 75 16.3 -20 to +75 300
Plenum (28.0) (.170) (9.0) (.235)
RG-6/U Type 9116R 6.19 Belden 1/.040″ BCCS GIFPE DBII/60% AL PVC .030 75 16.2 -40 to +80 300
Riser (28.0) (.180) (9.0) (.270)
RG-6/U Type 9116SB 6.19 Belden 1/.040″ BCCS GIFPE DBII/60% AL LSZH .031 75 16.2 -30 to +75 300
(28.0) (.180) (9.0) (.274)
RG-6/U Type 9117M 6.19 Belden 1/.040″ BCCS GIFPE DBII/60% AL PVC .042 75 16.2 -40 to +80 300
Messengered (28.0) (.180) (9.0) (.270 x .410)
RG-6/U Type 9118 6.21 Belden 1/.040″ BCCS GIFPE DBIII/60% AL PVC .026 75 16.2 -40 to +80 300
(28.0) (.180) (6.8) (.275)
RG-6/U Type 9119M 6.21 Belden 1/.040″ BCCS GIFPE DBIII/60% AL PVC .042 75 16.2 -40 to +80 300
Messengered (28.0) (.180) (6.5) (.275 x .416)
RG-6/U Type 9248 6.38 Belden 1/.040″ BC GIFHDPE DF/65% TC PVC .030 75 16.2 -40 to +80 300
(6.4) (.180) (5.6) (.270)
RG-6/U Type 9290 6.38 Belden 1/.037″ BC FPE None/95% BC PVC .054 75 17.3 -40 to +80 300
(7.5) (.180) None/95% BC (.288)
(2.0)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.7

RG Coaxial and Triaxial Reference Guide

RG-6, RG-8 and RG-11 Types

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

RG-6 Type (continued)

RG-6/U Type 82120 6.25 Belden 1/.040″ BCCS FFEP DF/95% TC FLM .044 75 16.5 -20 to +75 300
Plenum (28.0) (.170) (1.7) (.234)
RG-6/U Type 82248 6.38 Belden 1/.040″ BC FFEP DF/65% TC FLM .035 75 16.5 -20 to +75 300
Plenum (6.4) (.170) (5.1) (.222)
RG-6/U Type 87120 6.25 Belden 1/.040″ BCCS FFEP DF/95% TC PVDF .043 75 16.5 -20 to +150 300
Plenum (28.0) (.170) (1.7) (.234)
RG-6/U Type 89120 6.25 Belden 1/.040″ BCCS FFEP DF/95% TC FEP .044 75 16.5 -70 to +200 300
Plenum (28.0) (.170) (1.7) (.234)
RG-6/U Type 89248 6.38 Belden 1/.040″ BC FFEP DF/65% TC FEP .035 75 16.5 -70 to +200 300
Plenum (6.4) (.170) (5.1) (.222)
RG-8 Type
RG-8/U Type 7733A 6.70 Belden 1/.108″ BC FFEP DF/90% TC PVDF .115 50 24.2 -20 to +150 300
(0.9) (.280) (1.8) (.355)
RG-8/X Type 7808A 6.61 Belden 1/.057″ BC GIFHDPE DB/95% TC PE .036 50 23.0 -40 to +75 300
RF240 (3.2) (.150) (2.8) (.240)
RG-8/X Type 7808R 6.61 Belden 1/.057″ BC GIFHDPE DB/95% TC PVC .040 50 23.0 -40 to +75 300
RF240 Riser (3.2) (.150) (2.8) (.240)
RG-8/X Type 7808WB 6.61 Belden 1/.057″ BC GIFHDPE DB/95% TC PE .036 50 23.0 -40 to +75 300
RF240 Burial (3.2) (.150) (2.8) (.240)
RG-8/U Type 7810A 6.63 Belden 1/.108″ BCCA GIFHDPE DB/95% TC PE .077 50 23.0 -40 to +75 300
RF400 (1.34) (.285) (2.0) (.403)
RG-8/U Type 7810R 6.63 Belden 1/.108″ BCCA GIFHDPE DB/95% TC PVC .087 50 23.0 -40 to +75 300
RF400 Riser (1.34) (.285) (2.0) (.403)
RG-8/U Type 7810WB 6.63 Belden 1/.108″ BCCA GIFHDPE DB/95% TC PE .077 50 23.0 -40 to +75 300
RF400 Burial (1.34) (.285) (2.0) (.403)
RG-8/U Type 8214 6.69 Belden 7/.108″ BC FPE None/97% BC PVC .106 50 26.0 -40 to +80 300
(1.2) (.285) (1.1) (.403)
RG-8/U Type 8237 6.69 JAN-C-17A 7/.085″ BC PE None/97% BC PVC .104 52 28.5 -40 to +75 3,700
(1.9) (.285) (1.2) (.405)
RG-8/U Type 9251 6.69 MIL-C-17D 7/.085″ BC PE None/97% BC PVC-NC .099 52 28.5 -40 to +80 3,700
(1.9) (.285) (1.2) (.405)
RG-8/X Type 9258 6.69 Belden 19/.058″ BC GIFPE None/95% BC PVC .035 50 24.8 -30 to +80 300
(4.3) (.155) (3.3) (.242)
RG-8/U Type 9880 6.83 Belden, DEC 1/.086″ BC FPE DBIV/94% TC PVC .113 50 26.0 -30 to +60 300
Thick Ethernet PN17-00451-00 (1.4) (.243) 90% TC (.405)
(1.5)
RG-8/U Type 9888 6.90 Belden 7/.108″ BC FPE Inner Inner PE .130 50 26.0 -55 to +80 300
Triaxial (1.2) (.285) None/96% BC (.370)
(1.2) Outer PE
Outer (.480)
None/96% BC
(2.1)
RG-8/U Type 9913 6.70 Belden 1/.108″ BC SSPE DBII/90% TC PVC .097 50 24.6 -40 to +80 300
(0.9) (.286) (1.8) (.405)
RG-8/U Type 9913F7 6.70 Belden 7/.108″ BC GIFHDPE DB/95% TC BELFX .094 52 22.5 -40 to +80 300
(1.1) (.285) (1.8) (.405)
RG-8/U Type 9914 6.70 Belden 1/.103″ BC GIFHDPE DBII/95% TC PVC .108 50 24.8 -40 to +80 300
(1.8) (.285) (1.1) (.403)
RG-8/U Type 89880 6.83 Belden, DEC 1/.086″ BC FFEP DBIV/90% TC PVDF .137 50 26.0 -25 to +150 300
Thick Ethernet PN17-00324-00 (1.4) (.245) 90% TC (.375)
Plenum (1.5)
RG-8/U Type 89913 6.70 Belden 1/.108″ BC SSFEP DBII/90% TC PVDF .115 50 25.0 -20 to +150 300
Plenum (0.9) (.295) (1.8) (.364)
RG-11 Type
RG-11/U Type 1153A 6.28 Belden, IBM 1/.064″ BCCS FFEP DF/60% TC FEP .092 75 16.2 -70 to +200 300
Plenum P/N1501908 (11.0) (.280) DF/40% TC (.387)
6 • Coaxial Cables

(1.8)
RG-11/U Type 1523A 6.26 Belden 1/.064″ BCCS GIFPE DBII/60% AL PVC .054 75 16.2 -40 to +80 300
(11.0) (.280) (4.1) (.400)
RG-11/U Type 1523AN 6.26 Belden 1/.064″ BCCS GIFPE DBII/60% AL PVC .054 75 16.2 -40 to +80 300
(11.0) (.280) (4.1) (.400)
RG-11/U Type 1523AP 6.26 Belden 1/.064″ BCCS FFEP DBII/60% AL PVDF .057 75 16.3 -20 to +150 300
Plenum (11.0) (.274) (4.1) (.348)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.8

RG Coaxial and Triaxial Reference Guide

RG/11U Type

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

RG-11/ U Type (continued)

RG-11/U Type 1523R 6.26 Belden 1/.064″ BCCS GIFPE DBII/60% AL PVC .054 75 16.2 -30 to +80 300
Riser (11.0) (.280) (4.1) (.400)
RG-11/U Type 1524AM 6.26 Belden 1/.064″ BCCS GIFPE DBII/60% AL PVC .070 75 16.2 -40 to +80 300
Messengered (11.0) (.280) (4.1) (.400 x .580)
RG-11/U Type 1525A 6.26 Belden 1/.064″ BCCS GIFPE DBII/60% AL PE .046 75 16.2 -50 to +80 300
Burial (11.0) (.280) (4.1) (.400)
RG-11/U Type 1617A 6.28 Belden 1/.064″ BCCS GIFPE DBIV/60% AL PVC .059 75 16.2 -40 to +80 300
(11.0) (.280) 40% AL (.407)
(3.0)
RG-11/U Type 1618A 6.28 Belden 1/.064″ BCCS GIFPE DBIV/60% AL PE .053 75 16.2 -55 to +80 300
(11.0) (.280) 40% AL (.407)
(3.0)
RG-11/U Type 1619AM 6.28 Belden 1/.064″ BCCS GIFPE DBIV/60% AL PVC .075 75 16.2 -40 to +80 300
Messengered (11.0) (.280) 40% AL (.407 x .560)
(3.0)
RG-11/U Type 1620AM 6.28 Belden 1/.064″ CCS GIFPE DBIV/60% AL PVC .078 75 16.2 -40 to +80 300
Messengered (11.0) (.280) 40% AL (.407 x .560)
(3.0)
RG-11/U Type 1858A 6.53 Belden 19/.064″ BC GIFHDPE Inner Inner PE .147 75 17.3 -35 to +75 300
Triaxial (3.1) (.312) None/95% BC (.405)
High-Flex Version (1.8) Outer BELFX
Outer (.520)
None/95% BC
(1.4)
RG-11/U Type 1859A 6.53 Belden 19/.064″ BC FFEP Inner Inner PVDF .120 75 16.5 -20 to +125 300
Triaxial (3.1) (.285) None/95% (.350)
Plenum (1.4) Outer PVDF
Outer (.406)
None/87%
(1.4)
RG-11/U Type 3094A 6.84 Belden 1/.064″ BCCS GIFPE DBIV/67% AL PVC .059 75 16.2 -40 to +80 300
(11.0) (.280) 46% AL (.407)
(1.5)
RG-11/U Type 3095A 6.85 Belden 1/.064″ BCCS FFEP DBIV/67% AL PVDF .068 75 16.5 -20 to +150 300
(11.0) (.280) 46% AL (.387)
(3.9)
RG-11/U Type 7731A 6.44 Belden 1/.064″ BC GIFHDPE DF/95% TC PVC .100 75 16.0 -30 to +75 300
(2.5) (.280) (1.5) (.400)
RG-11/U Type 7732A 6.44 Belden 1/.064″ BC FFEP DF/95% TC PVDF .075 75 16.3 -20 to +150 300
Plenum (2.5) (.274) (1.6) (.348)
RG-11/U Type 7803A 6.54 Belden 1/.064″ BC GIFHDPE Inner Inner .112 75 16.1 -55 to +80 300
Triax (2.5) (.285) None/95% BC PE
Flooded (1.6) (.365)
Outer Outer
None/95% BC PE
(1.4) (.475)
RG-11/U Type 7983A 6.27 Belden 1/.064″ BCCS GIFPE DBIII+/77% AL PVC .084 75 16.2 -40 to +80 300
Aerial (11.0) (.280) (4.0) (.400 x .580)
RG-11/U Type 7984A 6.27 Belden 1/.064″ BCCS GIFPE DBIII+/77% AL PE .052 75 16.2 -55 to +80 300
Burial (11.0) (.280) (4.0) (.400)
RG-11/U Type 8213 6.39 Belden 1/.064″ BC GIFHDPE None/97% BC PE .087 75 16.1 -55 to +80 300
(2.6) (.285) (1.1) (.405)
RG-11/U Type 8233 6.54 Belden 1/.064″ BC GIFHDPE Inner Inner PE .112 75 16.1 -55 to +80 300
Triaxial (2.5) (.285) None/95% BC (.365)
(1.6) Outer
Outer PE
None/80% BC (.475)
(1.4)
RG-11/U Type 8233A 6.54 Belden 1/.064″ BC GIFHDPE Inner Inner .132 75 16.1 -30 to +75 300
Triaxial (2.5) (.285) None/95% BC PVC
(1.6) (.365)
Outer Outer
None/80% BC PVC
(1.4) (.475)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.9

RG Coaxial and Triaxial Reference Guide

RG/11U and RG-58 Types

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

RG-11/ U Type (continued)

RG-11/U Type 9011 6.26 Belden 1/.064″ BCCS GIFPE DF/40% AL PVC .060 75 16.2 -40 to +80 300
(11.0) (.280) (5.3) (.400)
RG-11/U Type 9064 6.27 Belden 1/.064″ BCCS GIFPE DB+/77% AL PVC .062 75 16.2 -40 to +80 300
(11.0) (.280) (3.8) (.400)
RG-11/U Type 9065M 6.27 Belden 1/.064″ BCCS GIFPE DB+/77% AL PVC .080 75 16.2 -40 to +80 300
Messengered (11.0) (.280) (3.8) (.400 x .580)
RG-11/U Type 9192 6.53 Belden 19/.064″ BC GIFHDPE Inner Inner .134 75 17.3 -40 to +75 300
Triaxial (3.3) (.312) None/90% BC PE
(1.6) (.390)
Outer Outer
None/82% BC PVC
(1.6) (.520)
RG-11/QPL 9212 6.79 MIL-C-17G 7/.048″ TC PE None/97% BC PVC-NC .090 75 20.5 -40 to +85 3,700
M17/6-RG11 (6.1) (.285) (1.2) (.405)
RG-11/U Type 9232 6.53 Belden 19/.064″ BC GIFHDPE Inner Inner PE .140 75 17.3 -20 to +75 300
Triaxial (3.0) (.312) None/90% BC (.390)
(1.6) Outer H
Outer (.520)
None/82% BC
(1.7)
RG-11/U Type 9292 6.39 Belden 1/.064″ BC GIFHDPE DF/61% TC PVC .081 75 16.1 -40 to +80 300
(2.5) (.280) (3.0) (.405)
RG-11/U Type 9764 6.27 Belden 1/.064″ BCCS GIFPE DB+/77% AL PE .056 75 16.2 -55 to +80 300
Burial (11.0) (.280) (3.8) (.400)
RG-11/U Type 89292 6.39 Belden 1/.064″ BC FFEP DF/63% TC FEP .077 75 16.1 -70 to +200 300
Plenum (2.5) (.274) (3.0) (.346)
RG-58 Type
RG-58/U Type 7806A 6.60 Belden 1/.037″ BC GIFHDPE DF/90% TC PE .022 50 24.3 -40 to +75 300
RF195 (7.6) (.110) (4.2) (.195)
RG-58/U Type 7806R 6.60 Belden 1/.037″ BC GIFHDPE DF/90% TC PVC .026 50 24.3 -40 to +75 300
RF195 Riser (7.6) (.110) (4.2) (.195)
RG-58/U Type 7807A 6.60 Belden 1/.044″ BC GIFHDPE DF/95% TC PE .026 50 23.5 -40 to +75 300
RF200 (3.3) (.116) (4.2) (.195)
RG-58/U Type 7807R 6.60 Belden 1/.044″ BC GIFHDPE DF/95% TC PVC .029 50 23.5 -40 to +75 300
RF200 Riser (3.3) (.116) (4.2) (.195)
RG-58A/U Type 8219 6.68 Belden 19/.037″ TC FPE None/96% TC PVC .025 53.5 26.5 -40 to +80 300
(8.8) (.114) (4.1) (.194)
RG-58A/U 8240 6.68 JAN-C-17A 1/.033″ BC PE None/95% TC PVC .025 51.5 28.5 -40 to +75 1,400
(10.0) (.116) (4.1) (.193)
RG-58A/U Type 8259 6.68 JAN-C-17A 19/.035″ TC PE None/95% TC PVC .024 50 30.8 -40 to +75 1,400
(10.8) (.116) (4.1) (.192)
RG-58C/U QPL 8262 6.77 MIL-C-17G 19/.035″ TC PE None/95% TC PVC-NC .024 50 30.8 -40 to +85 1,400
M17/155-00001 (10.8) (.115) (4.1) (.195)
RG-58/U Type 9201 6.67 Belden 1/.033″ BC PE None/78% BC PVC .022 51.5 28.5 -40 to +80 1,400
(10.0) (.116) (5.5) (.193)
RG-58/QPL 9203 6.77 MIL-C-17G 19/.035″ TC PE None/95% TC PVC-NC .025 50 30.8 -40 to +85 1,400
M17/28-RG-58 (10.8) (.116) (4.1) (.195)
RG-58A/U Type 9222 6.90 Belden 7/.037″ TC PE Inner Inner PE .037 50 30.8 -40 to +75 1,400
Triaxial (9.5) (.114) None/96% TC (.175)
(4.7) Outer PVC
Outer (.240)
None/85% TC
(4.3)
RG-58/U Type 9223 6.82 Belden 7/.030″ TC PE DBII/95% TC PVC .024 50 37.0 -40 to +80 1,900
6 • Coaxial Cables

(10.8) (.112) (4.1) (.195)

RG-58/U Type 9310 6.67 Belden 1/.033″ BC PE DBII/55% TC PVC .020 50 30.8 -40 to +60 1,400
(9.4) (.114) (8.0) (.193)
RG-58A/U Type 9311 6.68 Belden 19/.037″ TC FPE DBII/55% TC PVC .018 52 26.0 -40 to +80 300
(8.8) (.114) (17.0) (.193)
RG-58A/U Type 9907 6.83 DEC P/N 19/.037″ TC FPE DBII/93% TC PVC .022 50 25.4 -40 to +80 300
Thin Ethernets 17-01248-00 (8.8) (.102) (5.8) (.185)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.10

RG Coaxial and Triaxial Reference Guide

RG-58 and RG-59/U Types

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

RG-58 Type (continued)

RG-58A/U Type 82240 6.68 Belden 1/.032″ BC FEP None/95% TC FLM .030 53.5 26.4 0 to +75 1,400
Plenum (10.2) (.107) (6.7) (.159)
RG-58A/U Type 82907 6.83 Belden 19/.0375″ TC FFEP DBII/93% TC FLM .023 50 25.4 0 to +75 300
Thin Ethernets (8.8) (.095) (5.8) (.160)
Plenum
RG-58A/U Type 88240 6.68 Belden 1/.032″ BC FEP None/95% TC FEP .021 53.5 26.4 -70 to +200 300
Plenum (10.2) (.107) (6.7) (.159)
RG-58A/U Type 89907 6.83 DEC P/N 19/.0375″ TC FFEP DBII/93% TC PVDF .025 50 25.4 -20 to +150 300
Thin Ethernet 17-01246-00 (8.8) (.095) (5.8) (.160)
Plenum
RG-59/ U Type
RG-59/U Type 1151A 6.18 Belden, IBM 1/.032″ BCCS FFEP DF/52% TC FEP .035 75 16.5 -70 to +200 300
Plenum P/N 1501917 (26.0) (.140) DF/34% TC (.236)
(2.3)
RG-59/U Type 1186A 6.17 Belden 1/.032″ CCS GIFHDPE DBIV/67% AL PVC .025 75 16.2 -40 to +80 300
(44.5) (.144) 40% AL (.265)
(7.0)
RG-59/U Type 1426A 6.37 Belden 1/.032″ BC GIFHDPE None/95% BC PVC .033 75 16.3 -30 to +75 300
(10.0) (.145) (2.6) (.242)
RG-59/U Type 1505A 6.29 Belden 1/.032″ BC GIFHDPE DF/95% TC PVC .031 75 16.3 -30 to +75 300
(10.0) (.145) (3.8) (.234)
RG-59/U Type 1505F 6.29 Belden 7/.031″ BC GIFHDPE None/94% BC PVC .040 75 17.0 -35 to +75 300
(12.2) (.145) (2.4) (.242)
None/94% BC
(2.4)
RG-59/U Type 1506A 6.42 Belden 1/.032″ BC FFEP DF/95% TC FLM .027 75 16.0 -20 to +75 300
Plenum (10.0) (.133) (3.8) (.196)
RG-59/U Type 1856A 6.52 Belden 1/.032″ BC GIFHDPE Inner Inner PE .070 75 16.2 -35 to +75 300
Triaxial (10.1) (.145) None/95% BC (.216)
(2.5) Outer BELFX
Outer (.360)
None/95% BC
(1.6)
RG-59/U Type 1856B 6.52 Belden 1/.032″ BC GIFHDPE Inner Inner .073 75 16.2 -35 to +75 300
Triax (10.1) (.145) None/95% BC PVC
(2.5) (.216)
Outer Outer
None/95% BC BELFX
(1.6) (.360)
RG-59/U Type 1857A 6.51 Belden 19/.031″ BC FPE Inner Inner PE .075 75 17.0 -35 to +75 300
Triaxial (14.0) (.143) None/95% BC (.216)
High-Flex Version (2.5) Outer BELFX
Outer (.360)
None/90% BC
(1.6)
RG-59/U Type 8212 6.37 Belden 1/.032″ CCS FPE None/95% BC PE .030 75 17.3 -55 to +80 300
(44.5) (.143) (2.6) (.242)
RG-59/U Type 8221 6.36 Belden 1/.0253″ BCCS FPE None/85% BC PVC .032 80 16.3 -40 to +75 300
(50.0) (.146) (2.6) (.242)
RG-59/U Type 8232 6.51 Belden 1/.032″ BC GIFHDPE Inner Inner PE .054 75 16.2 -55 to +80 300
Triaxial (10.0) (.145) None/95% BC (.225)
(2.5) Outer PE
Outer (.315)
None/80% BC
(2.8)
RG-59/U Type 8232A 6.51 Belden 1/.032″ BC GIFHDPE Inner Inner PVC .065 75 16.2 -40 to +75 300
Triaxial (10.0) (.145) None/98% BC (.226)
(2.5) Outer PVC
Outer (.315)
None/80% BC
(2.8)
RG-59/U Type 8241 6.35 Belden 1/.023″ BCCS PE None/95% BC PVC .036 75 20.5 -40 to +75 1,700
(49.0) (.146) (2.6) (.240)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.11

RG Coaxial and Triaxial Reference Guide

RG-59/U Type

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

RG-59/ U Type (continued)

RG-59/U Type 8241A 6.35 Belden 1/.023″ BCCS FRSFPE None/95% BC PVC .039 75 20.5 -40 to +75 300
(49.0) (.146) (2.6) (.242)
RG-59/U Type 8241B 6.35 Belden 1/.0228″ BC PE None/95% BC PVC .038 75 20.5 -20 to +75 300
(20.0) (.146) (2.9) (.242)
RG-59/U Type 8241F 6.35 Belden 7/.030″ BC FPE None/95% BC PVC .033 75 17.3 -30 to +60 300
(15.0) (.146) (2.6) (.242)
RG-59B/U Type 8263 6.36 MIL-C-17D 1/.023″ BCCS PE None/95% BC PVC-NC .035 75 20.5 -40 to +60 1,700
(49.0) (.146) (2.6) (.242)
RG-59/U Type 8279 6.41 Belden 7/.023″ BCC PE None/95% TC PE .026 75 21.0 -55 to +80 2,300
Precision (19.1) (.146) (4.5) (.220)
RG-59/U Type 8281 6.30 Belden 1/.031″ BC PE None/97% TC PE .068 75 21.0 -55 to +80 2,900
Precision (9.9) (.198) None/95% TC (.305)
Video (1.1)
RG-59/U Type 8281B 6.30 Belden 1/.031″ BC FRSFPE None/97% TC PVC .078 75 21.0 -40 to +80 300
Precision (9.9) (.198) None/95% TC (.305)
Video (1.1)
RG-59/U Type 8281F 6.30 Belden 7/.0315″ BCC PE None/97% TC PVC .060 75 21.0 -20 to +60 2,900
Precision (12.2) (.198) None/95% TC (.305)
Video (1.7)
RG-59/U Type 9100 6.16 Belden 1/.032″ BCCS GIFPE DBII/40% AL PVC .020 75 16.2 -40 to +80 300
(44.5) (.144) (17.0) (.237)
RG-59/U Type 9104 6.17 Belden 1/.032″ BCCS GIFPE DBII/67% AL PVC .024 75 16.2 -40 to +80 300
(44.5) (.144) (12.0) (.237)
RG-59/U Type 9104N 6.17 Belden 1/.032″ BCCS GIFPE DBII/67% AL PVC .024 75 16.2 -40 to +80 300
(44.5) (.144) (12.0) (.237)
RG-59/U Type 9104P 6.17 Belden 1/.032″ BCCS FFEP DBII/67% AL FLM .024 75 16.3 -20 to +75 300
Plenum (44.5) (.140) (12.0) (.203)
RG-59/U Type 9105M 6.17 Belden 1/.032″ BCCS GIFHDPE DBII/67% AL PVC .037 75 16.2 -40 to +80 300
(44.5) (.140) (12.0) (.240 x .387)
RG-59/U Type 9110 6.17 Belden 1/.032″ BCCS GIFHDPE DBIII/67% AL PVC .022 75 16.2 -40 to +80 300
(44.5) (.144) (12.0) (.242)
RG-59/U Type 9141 6.43 Belden 1/.031″ BC PE None/97% TC PE .069 75 20.0 -55 to +80 1,900
Precision (9.9) (.200) None/95% TC (.305)
Video (1.1)
RG-59/U Type 9167 6.29 Belden 1/.032″ SPCCS GIFPE DB+/95% AL PVC .028 75 16.2 -40 to +80 300
(25.8) (.144) (4.5) (.242)
RG-59/QPL 9204 6.79 MIL-C-17G 1/.023″ BCCS PE None/95% BC PVC-NC .034 75 20.5 -40 to +85 1,700
M17/29-RG59 (47.0) (.146) (2.6) (.241)
RG-59/U Type 9209 6.41 Belden 1/.023″ BC PE DF/95% TC PE .026 75 21.0 -55 to +80 2,300
Precision (20.4) (.146) (4.5) (.220)
Video
RG-59/U Type 9209A 6.41 Belden 1/.023″ BC FRSFPE DF/95% TC PVC .035 75 20.5 -40 to +75 300
Precision (20.4) (.146) (4.5) (.220)
Video
RG-59/U Type 9224 6.82 Belden 1/.025″ BCCS PE None/93% BC PVC .033 75 22.0 -40 to +75 1,900
(54.0) (.146) (2.5) (.242)
RG-59/U Type 9231 6.42 W/E 728B 1/.031″ BC PE None/97% TC PVC .071 75 21.0 -40 to +60 1,900
Precision (9.9) (.198) None/95% TC (.305)
Video (1.1)
RG-59/U Type 9240 6.37 Belden 1/.032″ BCCS FPE None/80% BC PVC .028 75 17.3 -40 to +75 300
(44.5) (.143) (5.6) (.241)
RG-59/U Type 9244 6.36 Belden 1/.025″ BCCS PE None/85% BC PVC .034 75 19.4 -40 to +80 1,700
(50.0) (.146) (4.5) (.242)
RG-59/U Type 9259 6.36 Belden 7/.030″ BC FPE None/95% BC PVC .033 75 17.3 -40 to +80 300
6 • Coaxial Cables

(15.0) (.146) (2.6) (.241)

RG-59/U Type 9267 6.52 Belden 1/.032″ BC GIFHDPE Inner Inner PE .079 75 16.3 -20 to +80 300
Triaxial (10.0) (.145) None/95% BC (.216)
(2.5) Outer H
Outer (.360)
None/80% BC
(2.6)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.12

RG Coaxial and Triaxial Reference Guide

RG-59/U, RG-62 and Other Misc. RG Types

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

RG-59/ U Type (continued)

RG-59/U Type 9274 6.37 Belden 1/.032″ BCCS FPE None/95% BC PVC .030 75 16.3 -40 to +80 300
(44.5) (.143) (3.5) (.240)
RG-59/U Type 9275 6.16 Belden 1/.032″ BCCS GIFPE DF/40% AL PVC .023 75 16.2 -40 to +80 300
(44.5) (.144) (17.0) (.237)
RG-59/U Type 9555 6.84 Belden 1/.023″ BCCS FRSFPE None/95% BC PVC .075 75 20.5 -40 to +80 300
Dual (50.0) (.146) (2.6) (.238 x .478)
RG-59/U Type 9659 6.36 Belden 7/.030″ BC FPE None/95% BC PVC-NC .032 75 17.3 -40 to +80 300
(15.0) (.146) (2.6) (.242)
RG-59/U Type 82108 6.18 Belden 1/.032″ BCCS FFEP DF/96% TC FLM .035 75 16.5 0 to +75 300
Plenum (26.0) (.140) (2.6) (.202)
RG-59/U Type 82241 6.35 Belden 1/.023″ BCCS FEP None/97% BC FLM .035 75 19.5 -20 to +75 1,700
Plenum (49.0) (.134) (2.6) (.190)
RB-59/U Type 82259 6.36 Belden 7/.030″ BC FFEP None/95% BC FLM .036 75 17.3 -20 to +75 300
Plenum (15.0) (.135) (2.6) (.193)
RG-59/U Type 88241 6.35 Belden 1/.023″ BCCS FEP None/97% BC FEP .037 75 19.5 -70 to +200 1,700
Plenum (49.0) (.132) (2.6) (.190)
RG-59/U Type 88232 6.51 Belden 1/.032″ BC FFEP Inner Inner FEP .060 75 16.9 -40 to +200 300
Plenum Triax (32.8) (.140) None/95% BC (.188)
(2.6) Outer FEP
None/95% BC (.245)
(2.6)
RG-59/U Type 88281 6.43 Belden 1/.032″ BC FEP None/98% TC PVDF .082 75 19.0 -20 to +150 1,900
Precision Video (9.9) (.185) None/96% TC (.271)
Plenum (1.1)
RG-59/U Type 89108 6.18 Belden 1/.032″ BCCS FFEP DF/96% TC FEP .035 75 16.5 -70 to +200 300
Plenum (26.0) (.140) (2.6) (.203)
RG-59/U Type 89259 6.36 Belden 7/.030″ BC FFEP None/95% BC FEP .036 75 17.3 -70 to +200 300
Plenum (15.0) (.135) (2.6) (.193)
RG-59/U Type 89555 6.84 Belden 1/.023″ BCCS FEP None/97% BC FEP .085 75 19.5 -70 to +200 1,700
Dual Plenum (50.0) (.134) (2.6) (.212 x .424)
RG-62 Type
RG-62/U Type 8254 6.85 JAN-C-17A 1/.025″ BCCS SSPE None/95% BC PVC .033 93 13.5 -40 to +80 750
(41.2) (.146) (2.9) (.238)
RG-62B/U Type 8255 6.85 MIL-C-17D 7/.024″ BCCS SSPE None/95% BC PVC-NC .032 93 13.5 -40 to +80 750
(59.0) (.146) (2.9) (.242)
RG-62A/U Type 9228 6.85 Belden 1/.025″ BCCS SSPE None/95% BC HDPE .033 93 13.5 -55 to +80 750
(41.2) (.146) (2.9) (.242)
RG-62A/U Type 9268 6.85 Belden, IBM 1/.025″ BCCS SSPE None/95% BC PVC .037 93 13.5 -40 to +80 750
P/N 5252750 (41.2) (.146) (2.9) (.260)
RG62A/U Type 9269 6.85 Belden, IBM 1/.025″ BCCS SSPE None/95% BC PVC .034 93 13.5 -40 to +80 750
P/N 323921 (41.2) (.146) (2.9) (.239)
RG-62/QPL 9862 6.80 MIL-C-17G 1/.025″ BCCS SSPE None/95% BC PVC-NC .033 93 13.5 -40 to +80 750
M17/30-RG62 (41.2) (.146) (2.9) (.242)
RG-62/U Type 82262 6.86 Belden 1/.025″ BCCS FFEP None/94% BC FLM .035 93 12.5 0 to +75 300
Plenum (41.2) (.146) (3.4) (.204)
RG-62/U Type 82269 6.86 Belden 1/.025″ BCCS SSFEP None/94% BC FLM .035 93 12.8 0 to +75 750
Plenum (41.2) (.142) (3.4) (.200)
RG-62/U Type 86262 6.86 Belden, IBM 1/.025″ BCCS FFEP None/94% BC FEP .035 93 12.5 -70 to +200 300
Plenum (41.2) (.146) (3.4) (.204)
RG-62/U Type 87269 6.86 Belden 1/.025″ BCCS SSFEP None/94% BC PVDF .031 93 12.8 -20 to +150 750
Plenum (41.2) (.142) (3.4) (.200)
RG-62/U Type 89269 6.86 Belden, IBM 1/.025″ BCCS SSFEP None/94% BC FEP .033 93 12.8 -70 to +200 750
Plenum (41.2) (.142) (3.4) (.200)
Other Misc. RG Types
RG-63/QPL 9857 6.80 MIL-C-17G 1/.025″ BCCS SSPE None/97% BC PVC-NC .078 125 9.7 -40 to +80 750
M17/31-RG63 (41.2) (.285) (1.2) (.405)
RG-71/QPL 9169 6.80 MIL-C-17G 1/.025″ BCCS SSPE None/95% BC PE .042 93 13.5 -55 to +80 750
M17/90-RG71 (41.2) (.146) None/95% TC (.245)
(1.5)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.13

RG Coaxial and Triaxial Reference Guide

Misc. RG Types and Miniature Coax

Conductor Suggested Max. Oper.

Insulation Shield Type Jacket Nom. Nom. Nom.
Part Page Spec. Stranding/ Operating Voltage
Cable Designation Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
No. No. Reference Temp. Range (RMS)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (Ω) (pF/Ft.)
(°C) UL Non UL

Other Misc. RG Types (continued)

RG-122/U QPL 9252 6.76 MIL-C-17G 27/.030″ TC PE None/95% TC PVC-NC .017 50 30.8 -40 to +80 1,400
M17/157-00001 (17.1) (.096) (5.2) (.160)
RG-142B/U QPL 83242 6.77 MIL-C-17G 1/.037″ SCCS TFE None/96% SC FEP .043 50 29.0 -70 to +200 1,400
M17/158-00001 (19.3) (.116) None/96% SC (.195)
(2.3)
RG-142/ QPL 84142 6.77 MIL-C-17G 1/.037″ SCCS TFE None/96% SC FEP .043 50 29.0 -70 to +200 1,400
M17/60-RG142 (19.3) (.116) None/96% SC (.195)
(2.3)
RG-174/U Type 7805 6.59 Belden 1/.018″ BC PE DF/90% TC PVC .010 50 31.2 -40 to +75 1,100
RF100 (32.0) (.061) (9.1) (.110)
RG-174/U Type 7805R 6.59 Belden 1/.0195″ BC FPE DF/90% TC PVC .010 50 26.2 -40 to +75 300
RF 100 Low Loss (27.3) (.060) (9.4) (.110)
RG-174/U Type 8216 6.67 MIL-C-17F 7/.019″ BCCS PE None/90% TC PVC .008 50 30.8 -40 to +75 1,100
(97.0) (.060) (10.7) (.110)
RG-174/U Type 9239 6.82 Belden 7/.019″ BCCS PE None/90% TC PVC .008 50 38.0 -40 to +60 1,100
(97.0) (.044) (14.0) (.101)
RG-178B/U QPL 83265 6.76 MIL-C-17G 7/.012″ SPCCS TFE None/95% SPC FEP .005 50 29.0 -70 to +200 750
M17/169-00001 (244.0) (.033) (14.6) (.071)
RG-179/QPL 83264 6.79 MIL-C-17G 7/.012″ SPCCS TFE None/94% SPC FEP .010 75 19.5 -70 to +200 900
M17/94-RG179 (244.0) (.062) (8.5) (.100)
RG-180/QPL 83266 6.80 MIL-C-17G 7/.012″ SPCCS TFE None/91% SPC FEP .018 95 15.0 -70 to +200 1,100
M17/95-RG180 (244.0) (.102) (6.5) (.141)
RG-187A/U Type 83267 6.84 MIL-C-17D 7/.012″ SPCCS TFE None/95% SPC TFE-T .010 75 19.5 -70 to +200 900
(244.0) (.063) (8.6) (.103)
RG-188A/U Type 83269 6.67 MIL-C-17D 7/.020″ SCCCS TFE None/96% SPC TFE-T .011 50 29.0 -70 to +200 900
(91.2) (.058) (8.5) (.098)
RG-212/U QPL 9861 6.78 MIL-C-17G 1/.056″ SPC PE None/95% SPC PVC-NC .081 50 30.8 -50 to +80 2,200
M17/162-00001 (3.3) (.185) None/95% SC (.332)
(1.1)
RG-213/U QPL 8267 6.78 MIL-C-17G 7/.089″ BC PE None/96% BC PVC-NC .102 50 30.8 -40 to +80 3,700
M17/163-00001 (1.7) (.285) (1.2) (.405)
RG-214/U QPL 8268 6.78 MIL-C-17G 7/.089″ SPC PE None/97% SPC PVC-NC .128 50 30.8 -40 to +80 3,700
M17/164-00001 (1.7) (.285) None/97% SPC (.425)
(.7)
RG-216/QPL 9850 6.79 MIL-C-17G 7/.048″ TC PE None/95% BC PVC-NC .122 75 20.5 -40 to +80 3,700
M17/77-RG216 (6.1) (.285) None/95% BC (.425)
(.8)
RG-223/U QPL 9273 6.77 MIL-C-17G 1/.034″ SCC PE None/95% SCC PVC-NC .036 50 30.8 -40 to +60 1,400
M17/167-00001 (8.8) (.117) None/95% SCC (.212)
(2.5)
RG-303/QPL 84303 6.77 MIL-C-17G 1/.037″ SCCCS TFE None/95% SCC FEP .030 50 29.0 -70 to +200 1,400
M17/111-RG303 (16.3) (.116) (4.3) (.170)
RG-316/U QPL 83284 6.76 MIL-C-17G 7/.020″ SPCCS TFE None/95% SPC FEP .010 50 29.0 -70 to +200 900
M17/172-00001 (84.1) (.058) (6.5) (.098)
RG-316/QPL 84316 6.76 MIL-C-17G 7/.020″ SPCCS TFE None/95% SPC FEP .010 50 29.0 -70 to +200 900
M17/113-RG316 (84.1) (.058) (6.5) (.098)
Miniature Coax
Miniature Coax 8218 6.34 Belden 7/.017″ BCCS PE None/93% TC PVC .014 75 20.5 -40 to +60 1,700
(120.0) (.100) (5.7) (.150)
Miniature Coax 8700 6.82 Belden 1/.013″ TC PP None/90% BC PVC .003 32 55.2 -30 to +105 300
(66.9) (.023) (28.7) (.054)
Miniature Coax 9221 6.34 Belden 7/.012″ TC FHDPE None/89% TC PVC .006 75 17.3 -40 to +60 30
(100.0) (.058) (11.7) (.097)
6 • Coaxial Cables

Miniature 1855A 6.40 Belden 1/.023″ BC GIFHDPE DF/95% TC PVC .018 75 16.3 -30 to +75 300
RG-59/U Type (20.1) (.102) (7.6) (.159)
Sub-Miniature 1865A 6.40 Belden 19/.021″ BC GIFHDPE DF/95% TC PVC .014 75 16.5 -40 to +75 300
RG-59/U Type (27.4) (.094) (5.4) (.150)
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.14

RG Coaxial and Triaxial Reference Guide

Bundled Coax

Conductor Suggested Max. Oper.

No. Insulation Shield Type Jacket Nom. Nom. Nom.
Cable Part Page Spec. Stranding/ Operating Voltage
of Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
Designation No. No. Reference Temp. Range (RMS)
Coax (Ω) (pF/Ft.)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (°C) UL Non UL

Bundled Coax
Bundled Coax 1520A 3 6.47 Belden 7/.012″ TC FHDPE DF/90% TC PVC .042 75 17.3 -40 to +60 300
Sub-Miniature (100.0) (.056) (9.5) (.283)
RGB
Bundled Coax 1521A 4 6.47 Belden 7/.012″ TC FHDPE DF/90% TC PVC .050 75 17.3 -40 to +60 300
Sub-Miniature (100.0) (.056) (9.5) (.310)
RGB
Bundled Coax 1522A 5 6.47 Belden 7/.012″ TC FHDPE DF/90% TC PVC .058 75 17.3 -40 to +60 300
Sub-Miniature (100.0) (.056) (9.5) (.338)
RGB
Bundled Coax 1406B 3 6.47 Belden 7/.019″ BC FHDPE DF/93% TC PVC .064 75 17.3 -40 to +60 300
Miniature (41.5) (.090) (8.6) (.388)
RGB
Bundled Coax 1407B 4 6.47 Belden 7/.019″ BC FHDPE DF/93% TC PVC .088 75 17.3 -40 to +60 300
Miniature (41.5) (.090) (8.6) (.455)
RGB
Bundled Coax 1417B 5 6.47 Belden 7/.019″ BC FHDPE DF/93% TC PVC .102 75 17.3 -40 to +60 300
Miniature (41.5) (.090) (8.6) (.477)
RGB
Bundled Coax 1164B 3 6.48 Belden 7/.019″ BC FHDPE DF/93% TC PVC .066 75 17.3 -40 to +60 300
RGB (41.5) (.090) (8.6) (.388)
Bundled Coax 1167B 4 6.48 Belden 7/.019″ BC FHDPE DF/93% TC PVC .090 75 17.3 -40 to +60 300
RGB (41.5) (.090) (8.6) (.455)
Bundled Coax 1418B 5 6.48 Belden 7/.019″ BC FHDPE DF/93% TC PVC .104 75 17.3 -40 to +60 300
RGB (41.5) (.090) (8.6) (.477)
Bundled Coax 1277R 3 6.48 Belden 1/.018″ TC FPFA DB/95% TC PVC .048 75 17.0 -40 to +75 300
RGB (34.0) (.074) (5.4) (.320)
Bundled Coax 1278R 4 6.48 Belden 1/.018″ TC FPFA DB/95% TC PVC .060 75 17.0 -40 to +75 300
RGB (34.0) (.074) (5.4) (.351)
Bundled Coax 1279R 5 6.48 Belden 1/.018″ TC FPFA DB/95% TC PVC .080 75 17.0 -40 to +75 300
RGB (34.0) (.074) ((5.4) (.403)
Bundled Coax 1280R 6 6.48 Belden 1/.018″ TC FPFA DB/95% TC PVC .087 75 17.0 -40 to +75 300
RGB (34.0) (.074) (5.4) (.423)
Bundled Coax 1277P 3 6.48 Belden 1/.018″ TC FPFA DB/95% TC PVC .043 75 16.8 -20 to +75 300
RGB Plenum (34.0) (.074) (5.4) (.276)
Bundled Coax 1278P 4 6.48 Belden 1/.018″ TC FPFA DB/95% TC PVC .053 75 16.8 -20 to +75 300
RGB Plenum (34.0) (.074) (5.4) (.304)
Bundled Coax 1279P 5 6.48 Belden 1/.018″ TC FPFA DB/95% TC PVC .068 75 16.8 -20 to +75 300
RGB Plenum (34.0) (.074) (5.4) (.335)
Bundled Coax 1280P 6 6.48 Belden 1/.018″ TC FPFA DB/95% TC PVC .079 75 16.8 -20 to +75 300
RGB Plenum (34.0) (.074) (5.4) (.369)
Bundled Coax 1281S3 3 6.49 Belden 1/.018″ TC GIFHDPE DB/95% TC PVC .031 75 17.0 -40 to +75 300
RGB BananaPeel® (34.0) (.074) (5.4) (.246)
Bundled Coax 1281S4 4 6.49 Belden 1/.018″ TC GIFHDPE DB/95% TC PVC .044 75 17.0 -40 to +75 300
RGB BananaPeel (34.0) (.074) (5.4) (.275)
Bundled Coax 1281S5 5 6.49 Belden 1/.018″ TC GIFHDPE DB/95% TC PVC .055 75 17.0 -40 to +75 300
RGB BananaPeel (34.0) (.074) (5.4) (.308)
Bundled Coax 1281S6 6 6.49 Belden 1/.018″ TC GIFHDPE DB/95% TC PVC .068 75 17.0 -40 to +75 300
RGB BananaPeel (34.0) (.074) (5.4) (.342)
Bundled Coax 1282S3 3 6.49 Belden 1/.018″ TC FPFA DB/95% TC FLM .034 75 16.8 -20 to +75 300
RGB BananaPeel (34.0) (.075) (5.4) (.246)
Plenum
Bundled Coax 1282S4 4 6.49 Belden 1/.018″ TC FPFA DB/95% TC FLM .049 75 16.8 -20 to +75 300
RGB BananaPeel (34.0) (.075) (5.4) (.275)
Plenum
Bundled Coax 1282S5 5 6.49 Belden 1/.018″ TC FPFA DB/95% TC FLM .067 75 16.8 -20 to +75 300
RGB BananaPeel (34.0) (.075) (5.4) (.308)
Plenum
Bundled Coax 1282S6 6 6.49 Belden 1/.018″ TC FPFA DB/95% TC FLM .080 75 16.8 -20 to +75 300
RGB BananaPeel (34.0) (.075) (5.4) (.342)
Plenum
*Inner conductors are entered as: number of strands/strand diameter (in inches). See page 6.15 for key to abbreviations used in this table.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m
C O A X I A L C A B L E S 6.15

RG Coaxial and Triaxial Reference Guide

Bundled and S-Video Coax

Conductor Suggested Max. Oper.

No. Insulation Shield Type Jacket Nom. Nom. Nom.
Cable Part Page Spec. Stranding/ Operating Voltage
of Dia. & Type* Material Tape/Braid Material Weight Imp. Cap.
Designation No. No. Reference Temp. Range (RMS)
Coax (Ω) (pF/Ft.)
(DCR/1000 Ft.) (OD in.) (DCR/1000 Ft.) (OD in.) (Lbs./Ft.) (°C) UL Non UL

Bundled Coax (continued)

RG-6 Type 7710A 3 6.46 Belden 1/.040″ BC GIFPE DF/95% TC PVC-M .234 75 16.2 -40 to +75 300
Bundled SDI Coax (6.4) (.180) (3.0) (.770)
RG-6 Type 7711A 4 6.46 Belden 1/.040″ BC GIFPE DF/95% TC PVC-M .303 75 16.2 -40 to +75 300
Bundled SDI Coax (6.4) (.180) (3.0) (.900)
RG-6 Type 7712A 5 6.46 Belden 1/.040″ BC GIFPE DF/95% TC PVC-M .371 75 16.2 -40 to +75 300
Bundled SDI Coax (6.4) (.180) (3.0) (.970)
RG-6 Type 7713A 10 6.46 Belden 1/.040″ BC GIFPE DF/95% TC PVC-M .772 75 16.2 -40 to +75 300
Bundled SDI Coax (6.4) (.180) (3.0) (1.386)
RG-59/U Type 7787A 3 6.45 Belden 1/.023″ BC GIFHDPE DF/95% TC PVC .081 75 16.5 -35 to +75 300
Bundled (Miniature) (20.1) (.102) (7.6) (.432)
RG-59/U Type 7788A 4 6.45 Belden 1/.023″ BC GIFHDPE DF/95% TC PVC .106 75 16.5 -35 to +75 300
Bundled (Miniature) (20.1) (.102) (7.6) (.481)
RG-59/U Type 7789A 5 6.45 Belden 1/.023″ BC GIFHDPE DF/95% TC PVC .133 75 16.5 -35 to +75 300
Bundled (Miniature) (20.1) (.102) (7.6) (.539)
RG-59/U Type 7790A 6 6.45 Belden 1/.023″ BC GIFHDPE DF/95% TC PVC .163 75 16.5 -35 to +75 300
Bundled (Miniature) (20.1) (.102) (7.6) (.597)
RG-59/U Type 7791A 12 6.45 Belden 1/.023″ BC GIFHDPE DF/95% TC PVC .280 75 16.5 -35 to +75 300
Bundled (Miniature) (20.1) (.102) (7.6) (.796)
RG-59/U Type 7792A 12 6.45 Belden 1/.023″ BC GIFHDPE DF/95% TC PVC .336 75 16.5 -35 to +75 300
Bundled (Miniature) (20.1) (.102) (7.6) (.825)
RG-59/U Type 7794A 3 6.45 Belden 1/.032″ BC GIFHDPE DF/95% TC PVC .084 75 16.3 -35 to +75 300
Bundled (10.0) (.145) (3.8) (.631)
RG-59/U Type 7795A 4 6.45 Belden 1/.032″ BC GIFHDPE DF/95% TC PVC .190 75 16.3 -35 to +75 300
Bundled (10.0) (.145) (3.8) (.706)
RG-59/U Type 7796A 5 6.45 Belden 1/.032″ BC GIFHDPE DF/95% TC PVC .238 75 16.3 -35 to +75 300
Bundled (10.0) (.145) (3.8) (.790)
RG-59/U Type 7798A 10 6.45 Belden 1/.032″ BC GIFHDPE DF/95% TC PVC .501 75 16.3 -35 to +75 300
Bundled (10.0) (.145) (3.8) (1.166)
RG-59/U Type 1283S3 3 6.46 Belden 1/.032″ TC FFEP DF/95% TC PVC .103 75 16.2 -20 to +75 300
Bundled RGB Coax (10.0) (.133) (3.8) (.422)
BananaPeel Plenum
RG-59/U Type 1283S5 5 6.46 Belden 1/.032″ TC FFEP DF/95% TC PVC .174 75 16.2 -20 to +75 300
Bundled RGB Coax (10.0) (.133) (3.8) (.529)
BananaPeel Plenum
RG-59/U Type 1283S6 6 6.46 Belden 1/.032″ TC FFEP DF/95% TC PVC .209 75 16.2 -20 to +75 300
Bundled RGB Coax (10.0) (.133) (3.8) (.588)
BananaPeel Plenum
S-Video Coax
Parallel Coax 7700A 2 6.50 Belden 7/.012″ TC FFEP None/98% TC FLM .017 75 17.3 -20 to +60 300
S-Video Plenum (100.0) (.053) (7.5) (.107 x .214)
Parallel Coax 1807A 2 6.50 Belden 7/.012″ TC FHDPE None/90% TC PVC .013 75 17.3 -40 to +75 300
S-Video High-Flex (100.0) (.056) (7.5) (.110 x .230)
Round S-Video 1808A 2 6.50 Belden 7/.012″ TC FHDPE None/90% TC PVC .031 75 17.3 -40 to +75 300
High-Flex Design (100.0) (.056) (7.5) (.255)
*Inner conductors are entered as: number of strands/strand diameter (in inches).

Conductor Abbreviations Braid Abbreviations Insulation Abbreviations Jacket Abbreviations

BC = Bare Copper AL = Aluminum FEP = Fluorinated Ethylene Propylene BELFX = Belflex®
BCCA = Bare Copper-covered Aluminum BC = Bare Copper FFEP = Foam FEP FCP = Fluorocopolymer
CCS = Copper-clad Steel CT = Copper-Tin Composite FHDPE = Foam High-Density Polyethylene FEP = Fluorinated Ethylene Propylene
SC = Silver-coated Copper SC = Silver-coated Copper FPE = Foam Polyethylene FG = Fiberglass
SCA = Silver-coated Alloy SPC = Silver-plated Copper FRSFPE = Flame-retardant Semi-foam Polyethylene FLM = Flamarrest®
SCCS = Silver-coated Copper-covered Steel TC = Tinned Copper GIFHDPE = Gas-injected Foam High-Density Polyethylene H = Hypalon®
SPC = Silver-plated Copper GIFPE = Gas-injected Foam Polyethylene HDPE = High-density Polyethylene
SPCCS = Silver-plated Copper-covered Steel PE = Solid Polyethylene LSZH = Low-Smoke, Zero-Halogen
Tape Abbreviations
TC = Tinned Copper PP = Solid Polypropylene PE = Polyethylene
BB = Bonded Beldfoil®
6 • Coaxial Cables

BF = Beldfoil SSFEP = Semi-solid FEP PVC = Polyvinyl Chloride

DB = Duobond® SSPE = Semi-solid Polyethylene PVC-M = Matte finish Polyvinyl Chloride
DBII = Duobond II TFE = Tetrafluoroethylene PVC-NC = Non-contaminating Polyvinyl Chloride
DBIII = Duobond III TFE-T = Tetrafluoroethylene Tape Wrap
DBIV = Duobond IV
DB+ = Duobond Plus®
DF = Duofoil®
F = Foil
For information on coaxial cables not listed in this table, or for
a comprehensive Connector Cross-Reference, please contact
Hypalon is a DuPont trademark. Belden Electronics Division, Technical Support at: 1-800-BELDEN-1.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1 • w w w . b e l d e n . c o m