Scribd
Upload
55 views5 pages

Lecture 1

This document provides design specifications for a wooden flooring system using Apitong wood. It includes the material properties of Apitong wood, dimensions of the flooring components, and load assumptions. It then performs calculations to check for bending stress, shear stress, and deflection. All calculated values are found to be less than the allowable limits, indicating the flooring design is structurally safe.

Uploaded by

Hanne Zeshield Mier
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
55 views5 pages

Lecture 1

This document provides design specifications for a wooden flooring system using Apitong wood. It includes the material properties of Apitong wood, dimensions of the flooring components, and load assumptions. It then performs calculations to check for bending stress, shear stress, and deflection. All calculated values are found to be less than the allowable limits, indicating the flooring design is structurally safe.

Uploaded by

Hanne Zeshield Mier
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

DESIGN OF FLOORING

DESIGN OF FLOORING
DATA: PROPERTIES OF WOOD
1.07 kN/m
WOOD NAME APITONG
STRESS GRADE 80.00%
CLASSIFICATION 3 MEDIUM STRENGTH
BENDING AND TEN 16.5 Mpa
MOD OF ELASTICITY EW7.31
X 1000 Mpa
0.5m SHEAR // TO GRAIN 1.73 Mpa
Relative Density 0.57
SPECIFIC WEIGH 5.5917 kN/m3
0.2675 ALLOWABLE DEF L/240 mm
m m
150

DEAD LOAD(superIMPOSED) 1.00 kN/m2


LIVE LOAD 2.00 kN/m2
0.0334 SPACING OF JOIST 0.50 m
WOOD : APITONG
THICKNESS OF FLOORING 25 mm
WIDTH OF FLOORING 150 mm
SP. WEIGHT OF APITONG 4.02 kN/m3
I. CHECK BENDING 4.02
LIVE LOAD 2.00 kN/m2 0.6 DEAD LOAD
0.3 LENGTH 0.50 m 0.02 0.15
=2(150/1000) = 0.3 kN/m SELFWEIGHT (UNIFORMLY=5.5917kN/m3(25/1000)(150/1000)=0.02kN/m
ADDITIONAL DEAD 4.00 kN/m2 =4(/1000)=0.6kN/mADDITIONAL DEAD 1.00 kN/m2 =1(150/1000)=0.15kN/m
0.9 kN/m 0.17 kN/m
LOAD COMB 1.07 kN/m
I. CHECK BENDING
M(max) 0.0334 kN.m
fb = 6M/bd2 Fb (allowable) 16.50 MPa
fb (actual) 2.1376 MPa

IF ACTUAL BENDING IS LESSER OR EQUAL TO ALLOWABLE,BENDING IS SAFE SAFE!

II. CHECK SHEAR


V(max) 0.2675 kN
fv = 3V/2bd Fv(allowble) 1.73 MPa
fv(actual) 0.107 MPa

IF ACTUAL SHEAR IS LESSER OR EQUAL TO ALLOWABLE, SHEAR IS SAFE SAFE!

III. DEFLECTION
Ew 7310 MPa =7.31(1000) =7310 Mpa
I(moment of Inertia195312.5 mm4 7310

δ = 5wL^4/384 EI δ (allowable) 2.08 mm


δ (actual) 0.61 mm

IF ACTUAL DEFLECTION IS LESSER OR EQUAL TO ALLOWABLE DEFLECTION, BEAM IS SAFE SAFE!

150mm

25mm 195312.5

Moment of Inertia = bh^3/12


150mm(25mm^3)/12 = 195312.5mm^4 0.50 m

You might also like