GW1000-ABEIP

Datalink Ethernet IP to DH+

Datalink AB Ethernet to DH+

The DataLink GW1000-ABEIP is a gateway between both Ethernet/IP and AB Ethernet to AB’s DH+ Network.
The GW1000 interfaces any newer AB Ethernet/IP & AB Ethernet PLCs (ie. SLC 5/05, Compactlogix, Micrologix or PLC-
5E) or MMI/SCADA/Programming package to any device/node on AB’s DH+.
This gateway is a cost-effective alternative to the AB Controllogix Gateway (1756-ENBT and 1756-RIO).
Applications include:
 SCADA/MMI/Programming Software (RLSINX/LOGIX/VIEW,Wondware, Kepware, Citect, Intellution, et. all)
packages using AB Ethernet Drivers can read/write data from/to multiple DH+ nodes.
 Any AB Ethernet & Ethernet/IP PLC (MicroLogix, SLC 5/05, CompactLogix, FlexLogix, PLC-5E, ControlLogix) as
Master will be able to send either read or write MSG (message) instructions to any DH+ PLC (SLC 5/04, PLC-5).
 DH+ as Master allows applications such as Panelview on DH+ to message SLC 5/05 on Ethernet.
For details, pricing, or to find out if this solution is suitable for your application, please contact us.

Flexibility:
The GW1000 allow multiple Ethernet/IP and AB Ethernet Application to message Multiple DH+ Nodes.

Compact and Lightweight:

Palm-sized, portable freestanding Din Rin/Desktop Controller with USB, AC/DC power option.

Easy Configuration:
All setup is done via Web screen or Telnet.

Cost efficient:
Replace Controllogix (1756-DHRIO/1756-ENBT) functionality and reduces the need to upgrade Legacy DH+ PLCs to
newer AB Ethernet Processors.
Specifications:
Physical Dimensions Configuration
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x Integrated web server for configuring communications
118.3mm x 101.0mm) parameters.
Weight: 0.66lbs (0.3kg)
Power: 9-27 VDC; Less than 2 Watts Indicators
Installation Power
Plastic enclosure; Freestanding or DIN rail mounting DH+ status
with integrated clip Serial Status
Environment Serial RX
Operating: +32 F to 122 F (0C to +50 C) Serial TX
Storage: -40 F to +185 F (-40C to +85C) Ethernet Activity
Humidity: 5% to 95% non-condensing Ethernet Link

Protocols Pushbuttons
A-B Channel: Allen-Bradley Data Highway Plus or Reset
Remote I/O Configuration
Ethernet Channel: TCP/IP – 100-Base-T
Serial Channel: DF1 Hardware
Connections – Top
Communications – 3-pin power – 3.81mm pitch removable screw
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, terminal plug
and 230.4 Kbaud – 3-pin A-B DH+/RIO – 5.08mm pitch removable
Ethernet Channel: 100-Base–T; TCP/IP screw terminal plug
Serial channel: RS232, USB – RJ45- Ethernet
Connections – Bottom
– 5-pin RS485/RS422 – 3.81mm pitch removable
screw terminal plug
– D9 – RS232 port
– USB
DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.
DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-DHP1

DF1 TO DH+ NETWORK

ALTERNATIVE / REPLACEMENT FOR 1770-KF2, 1784-P(KTX), 1784-PCMK OR SST 5136-SD

The DataLink GW1000-DHP1 is a low cost, compact alternative to Allen-Bradley’s 1770-KF2. Also provides the same
functionality as the 1784-P(KTX), 1784-PCMK or SST 5136-SD.The DataLink converts A-B DF1, (Modbus & ASCII also
available) serial protocol to A-B DH+ network protocol providing a serial interface to DH+ for computers, modems and
OEM equipment. Applications include PLC programming and graphical user interfaces (GUIs and MMIs) such as RSLINX,
RSLOGIX, Wonderware, Kepare, Intellution, Citect, etc. The serial DF1 to DH+ conversion protocol available in the
GW1000-DHP1 is the same one available in the GW1000 product. The GW1000”s size, portability, and the choice
between a freestanding and DIN rail model make it especially convenient for use in the office, the plant floor, or when
travelling.

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.

DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-DHPA

ASCII TO DH+ NETWORK (DH+ ASCII)

The newest DataLink GW1000-DHPA (ASCII DH+) is an amalgamation of two existing products: the DL3000-ASM and
the DL3000-ASC. The improved compact freestanding ASCII serial interface gives customers the ability to send as well as
receive ASCII messages via A-B Data Highway Plus (DH+).
The DL3000-ASM facilitates ASCII data transfer to any PLC including models without an ASCII port, such as A-B’s
ControlLogix.
A block of data is temporarily stored in the ASM’s 240-byte buffer until the buffer is filled or an ASCII carriage return is
detected in the data. Once the data is terminated, the bytes are transmitted to the PLC’s integer files in DH+ protocol
format. All bytes are retransmitted in the order they were received minus the carriage return.
The DL3000-ASM now has the added functionality of the DL3000-ASC, enabling ASCII messages stored in PLC-5 data
tables to be transferred over DH+ (Data Highway Plus) to a serial printer or message display.
The -ASM is specifically designed to buffer DH+ (Data Highway Plus) message commands sent to its station address from
any PLC-5. The transmitted ASCII bytes are then flipped to produce messages on the printer in the same order as the
ASCII data is entered and displayed in the PLC.

Features:
Flexible System Layout:
scanners, printers, and message displays located anywhere on a DH+ network can send and receive ASCII messages to
and from PLCs in other locations
Compact and Lightweight:
Small footprint for installation convenience
Easy Configuration:
All parameters are menu-driven
High Speed:
Serial speeds from 300 baud to 19.2 Kbaud and also 57.6 Kbaud
Specifications:
Physical Dimensions Configuration
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x Integrated web server for configuring communications
101.0mm) parameters.
Weight: 0.66lbs (0.3kg) Indicators
Power: 9-27 VDC; Less than 2 Watts Power
Installation DH+ status
Plastic enclosure; Freestanding or DIN rail mounting with Serial Status
integrated clip Serial RX
Environment Serial TX
Operating: +32 F to 122 F (0C to +50 C) Ethernet Activity
Storage: -40 F to +185 F (-40C to +85C) Ethernet Link
Humidity: 5% to 95% non-condensing Pushbuttons
Reset
Protocols Configuration
A-B Channel: Allen-Bradley Data Highway Plus or Remote Hardware
I/O Connections – Top
Ethernet Channel: TCP/IP – 100-Base-T – 3-pin power – 3.81mm pitch removable screw terminal
Serial Channel: DF1 plug
Communications – 3-pin A-B DH+/RIO – 5.08mm pitch removable screw
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and terminal plug
230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP – RJ45- Ethernet
Connections – Bottom
– 5-pin RS485/RS422 – 3.81mm pitch removable screw
terminal plug
– D9 – RS232 port
– USB
DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.
DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-DHPM

Modbus to DH+ Network (Modbus to DH+)

The DataLink GW1000-DHPM provides high speed interconnectivity between an Allen-Bradley DH+ and a Modbus
network. The -DH+/Modbus can be any station on DH+ and can be set to either Modbus Master or Modbus Slave. Master
mode enables any DH+ station to read / write up to 100 words (per message) to any 4xxxx or 0xxxx register, and to read
up to 100 words from the 1xxxx and 3xxxx registers at any Modbus Slave address from 1 to 255. Slave mode enables a
Modbus Master to read or write up to 1600 coils or 100 registers (per message) to bit or integer files in any PLC-5 station
on DH+ (except 0). Modbus commands to address 0 can be “broadcast” to a selected range of DH+ stations.

Modbus Plus Connectivity:

Provides an interface to Modbus Plus via a Modicon BM85 Modbus Plus Bridge/Multiplexer

Multiple Modbus Protocols:

Master, Slave, RTU and Ascii

Compact and Lightweight:

Small footprint for easy installation

Flexible Serial Interfacing:

RS232C (RS422/RS485 options available)

Easy Configuration:
All parameters are menu-driven

Fastest Throughput:
Serial communications at up to 230.4 Kbaud
Physical Dimensions Configuration
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x Integrated web server for configuring communications
101.0mm) parameters.
Weight: 0.66lbs (0.3kg)
Indicators
Power: 9-27 VDC; Less than 2 Watts
Power
Installation DH+ status
Plastic enclosure; Freestanding or DIN rail mounting with Serial Status
integrated clip Serial RX
Serial TX
Environment
Ethernet Activity
Operating: +32 F to 122 F (0C to +50 C)
Ethernet Link
Storage: -40 F to +185 F (-40C to +85C)
Humidity: 5% to 95% non-condensing Pushbuttons
Reset
Protocols Configuration
A-B Channel: Allen-Bradley Data Highway Plus or Remote
Hardware
I/O
Connections – Top
Ethernet Channel: TCP/IP – 100-Base-T
– 3-pin power – 3.81mm pitch removable screw terminal
Serial Channel: DF1
plug
Communications – 3-pin A-B DH+/RIO – 5.08mm pitch removable screw
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and terminal plug
230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP – RJ45- Ethernet

Connections – Bottom
– 5-pin RS485/RS422 – 3.81mm pitch removable screw
terminal plug
– D9 – RS232 port
– USB

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.
DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-DHPME

DataLink Mod TCP (Modbus TCP/IP) to DH+

Datalink’s gateway interfaces your Modbus TCP/IP Network to AB’s Data Highway Plus DH+, extending the life of Allen-
Bradley PLC’s without Ethernet Interfaces.
The DataLink solution allows applications such as RSLogix, RSLinx, and RSView to access devices on a DH+ network
from an Ethernet/IP LAN, enabling users to run MMI applications or program and monitor PLCs on a DH+ network from an
Ethernet LAN station. Other MMI’s tested include Wonderware, Kepware, and Intellution.
The GW1000-DHPME (Modbus TCP) combines the Lantronix Ethernet Microprocessor with DH+ (Data Highway Plus)
token-ring technology.

Highlights:
Compact and Lightweight: The smallest and lightest freestanding/din rail mounted serial interface for custom networks
available.
Physical Dimensions Configuration
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x Integrated web server for configuring communications
101.0mm) parameters.
Weight: 0.66lbs (0.3kg)
Indicators
Power: 9-27 VDC; Less than 2 Watts
Power
Installation DH+ status
Plastic enclosure; Freestanding or DIN rail mounting with Serial Status
integrated clip Serial RX
Serial TX
Environment
Ethernet Activity
Operating: +32 F to 122 F (0C to +50 C)
Ethernet Link
Storage: -40 F to +185 F (-40C to +85C)
Humidity: 5% to 95% non-condensing Pushbuttons
Reset
Protocols Configuration
A-B Channel: Allen-Bradley Data Highway Plus or Remote
Hardware
I/O
Connections – Top
Ethernet Channel: TCP/IP – 100-Base-T
– 3-pin power – 3.81mm pitch removable screw terminal
Serial Channel: DF1
plug
Communications – 3-pin A-B DH+/RIO – 5.08mm pitch removable screw
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and terminal plug
230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP – RJ45- Ethernet

Connections – Bottom
– 5-pin RS485/RS422 – 3.81mm pitch removable screw
terminal plug
– D9 – RS232 port
– USB
DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.
DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-DHPE

Datalink Ethernet TCP/IP to DH+

The DataLink GW1000-DHPE is a gateway between an Ethernet TCP/IP Network and AB’s DH+ Network. This cost-
efficient solution extends the life of legacy Allen-Bradley PLC5 and SLC/04s by eliminating the need to upgrade each PLC
with an Ethernet processor.
Digi Ethernet Chip & DF1 Driver The GW1000-DHPE incorporates the Digi NS7520 Ethernet Chip on it’s board using the
Digi’s Redirector software to create a tunnel over Ethernet TCP/IP for any existing serial com port DF1 driver. The beneifit
of the GW1000 solution is that there isn’t any internal reformation of the serial DF1 protocol, thus eliminating a
“BOTTLENECK” of an internal DF1 RS-232 link. The tunnelled packet is received by the GW1000 and directly formatted
for DH+ transmission, and inversly, a DH+ received packet is immediately placed in an Ethernet TCP/IP packet for
transmission to the Redirector software on the PC/HMI/MMI.
The DataLink GW1000 Controller enables users to run MMI applications or program/monitor PLCs & SLCs on a DH+
Network from an Ethernet LAN station. Tested applications include RSLinx,RSLogix,RSView, Wonderware, & Citect.
The GW1000-DHPE combines the Lantronix Ethernet Microprocessor with DataLink’s DH+ token-ring technology.

Compact and Lightweight:

The smallest, portable freestanding Din Rail interface available.

Easy Configuration:
All parameters are menu-driven.

Cost efficient:
Reduces the need to purchase an AB Ethernet Processor for each PLC/SLC.
Specifications:

Physical Dimensions Configuration

Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x Integrated web server for configuring communications
101.0mm) parameters.
Weight: 0.66lbs (0.3kg) Indicators
Power: 9-27 VDC; Less than 2 Watts Power
Installation DH+ status
Serial Status
Plastic enclosure; Freestanding or DIN rail mounting with
Serial RX/Serial TX
integrated clip
Ethernet Activity
Environment Ethernet Link
Operating: +32 F to 122 F (0C to +50 C) Pushbuttons
Storage: -40 F to +185 F (-40C to +85C) Reset
Humidity: 5% to 95% non-condensing Configuration

Protocols Hardware
A-B Channel: Allen-Bradley Data Highway Plus or Remote Connections – Top
I/O – 3-pin power – 3.81mm pitch removable screw terminal
Ethernet Channel: TCP/IP – 100-Base-T plug
Serial Channel: DF1 – 3-pin A-B DH+/RIO – 5.08mm pitch removable screw
terminal plug
Communications – RJ45- Ethernet
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and
230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IPSerial Connections – Bottom
channel: – 5-pin RS485/RS422 – 3.81mm pitch removable screw
terminal plug
– D9 – RS232 port
– USB

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.
DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-MODTCP

DATALINK MOD TCP TO DH+ |

THE DATALINK GW1000-MODTCP IS A GATEWAY BETWEEN BOTH ETHERNET/IP AND AB ETHERNET

TO AB’S DH+ NETWORK.
The GW1000 interfaces any newer AB Ethernet/IP & AB Ethernet PLCs (ie. SLC 5/05, Compactlogix, Micrologix or PLC-
5E) or MMI/SCADA/Programming package to any device/node on AB’s DH+. This gateway is a cost-effective alternative
to the AB Controllogix Gateway (1756-ENBT and 1756-RIO).

Applications include:
* SCADA/MMI/Programming Software (RLSINX/LOGIX/VIEW,Wondware, Kepware, Citect, Intellution, et. all) packages
using AB Ethernet Drivers can read/write data from/to multiple DH+ nodes.
* Any AB Ethernet & Ethernet/IP PLC (MicroLogix, SLC 5/05, CompactLogix, FlexLogix, PLC-5E, ControlLogix) as Master
will be able to send either read or write MSG (message) instructions to any DH+ PLC (SLC 5/04, PLC-5).
* DH+ as Master allows applications such as Panelview on DH+ to message SLC 5/05 on Ethernet.

Flexibility:
The GW1000 allow multiple Ethernet/IP and AB Ethernet Application to message Multiple DH+ Nodes.

Compact and Lightweight:

Palm-sized, portable freestanding Din Rin/Desktop Controller with USB, AC/DC power option.

Easy Configuration:
All setup is done via Web screen or Telnet.

Cost efficient:
Replace Controllogix (1756-DHRIO/1756-ENBT) functionality and reduces the need to upgrade Legacy DH+ PLCs to
newer AB Ethernet Processors.
Specifications:

Physical Dimensions Configuration

Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x Integrated web server for configuring communications
101.0mm) parameters.
Weight: 0.66lbs (0.3kg)
Indicators
Power: 9-27 VDC; Less than 2 Watts
Power
Installation DH+ status
Plastic enclosure; Freestanding or DIN rail mounting with Serial Status
integrated clip Serial RX
Serial TX
Environment
Ethernet Activity
Operating: +32 F to 122 F (0C to +50 C)
Ethernet Link
Storage: -40 F to +185 F (-40C to +85C)
Humidity: 5% to 95% non-condensing Pushbuttons
Reset
Protocols Configuration
A-B Channel: Allen-Bradley Data Highway Plus or Remote
Hardware
I/O
Connections – Top
Ethernet Channel: TCP/IP – 100-Base-T
– 3-pin power – 3.81mm pitch removable screw terminal
Serial Channel: DF1
plug
Communications – 3-pin A-B DH+/RIO – 5.08mm pitch removable screw
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and terminal plug
230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP – RJ45- Ethernet

Serial channel: Connections – Bottom

– 5-pin RS485/RS422 – 3.81mm pitch removable screw
terminal plug
– D9 – RS232 port
– USB
DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.
DataLink Technologies

1465 Slater Road

Ferdale, WA, USA 98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-485EIP

Ethernet/IP to AB’s DH+ & DH-485 using CIP & 2222 Protocols.

Gateway between Legacy AB PLCs and AB Ethernet.

– DataLink now offers the GW1000 package that significantly reduces your AB Ethernet upgrading costs as you don’t
need to replace each DH+ PLC processor/device.
– AB PLC users can interface bi-directionally between Allen-Bradley Data Highway Plus (DH+) / DH-485 and AB Ethernet
(CIP & 2222 protocols).
– AB Ethernet (Master) to DH+ is the optimal communication direction. This allows multiple AB Ethernet (CIP and 2222)
devices to communicate to multiple DH+ nodes using the DataLink GW1000.
Ethernet IP to DH+ protocol converter.

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.

DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW-1000-ABEIP-DH-485
Datalink Ethernet TCP/IP to DH-485

The Datalink GW1000-ABEIP-DH-485 is a gateway between an Ethernet TCP/IP Network and AB’s DH-485 Network.
This cost-efficient solution extends the life of legacy Allen-Bradley PLC2, PLC3 and SLC/03s by eliminating the need to
upgrade each PLC with an Ethernet processor.
The DataLink GW1000-ABEIP-DH-485 Controller enables users to run MMI applications or program/monitor PLCs &
SLCs on a DH+ Network from an Ethernet LAN station. Tested applications include RSLinx,RSLogix,RSView,
Wonderware, & Citect.
The GW1000-ABEIP-DH-485 combines the Lantronix Ethernet Microprocessor with DataLink’s DH+ token-ring
technology.

Compact and Lightweight:

The smallest, portable freestanding Din Rail interface available.

Easy Configuration:
All parameters are menu-driven.

Cost efficient:
Reduces the need to purchase an AB Ethernet Processor for each PLC/SLC.
Specifications:

Interfaces Indicators
A-B Channel : Synchronous; SDLC Transformer-coupled Green for power-on
Ethernet Channel: 10 Base-T Bi-Color for DF1 tunneled over TCP/IP
Bi-Color for A-B Channel operation
Physical Dimensions
Bi-Color for GW1000-ABEIP-DH-485 Status
Size: 1.05″ H x 4.2″ D x 3.45″ W
Green for Network Link Status
(26.2mm x 105.0mm x 86.3mm)
Green for DF1 Channel operation
Weight: 0.66lbs (0.3kg)
Red for Diagnostics
Power: 9-27 VDC; Less than 2 Watts
Pushbuttons
Installation
Reset and Configure mode pushbuttons
Metal enclosure; Freestanding or DIN rail mounting clips
Communications
Environment
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and
Operating: +32 F to 122 F (0 C to +50 C)
230.4 Kbaud
Storage: -40 F to +185 F (-40 C to +85 C)
Ethernet Channel: 10 Base–T; TCP/IP
Humidity: 5% to 95% non-condensing
Hardware
Protocols
Z182 Processor; 64 Kbyte programmable EPROM;
A-B Channel: Allen-Bradley Data Highway 485 or Remote
32 Kbyte RAM; 256 byte EEPROM;
I/O
3-pin A-B DH+/RIO; DB9 configuration port;
Ethernet Channel: TCP/IP – 10 Base T
2-pin power connectors
Configuration RJ45- Ethernet Connector
Telnet to IP address for configuring communications Lantronix – Cobox Micro.
parameters.

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.
DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-DH485A

Ascii to DH-485 Network (DH-485 Ascii)

The DataLink GW1000-DH485A is a compact, DinRail ASCII Gateway to A-B DH-485 network protocol. It provides an
ASCII interface to PLC’s on the DH-485 Network for printers, bar code scanners, and other ASCII devices.
In Scanner operation the ASCII data is stored in the buffer until either a terminating character (CR, LF, CR & LF) or 240
bytes are received. The packet of ASCII data is then sent to an integer file in the PLC.
In Printer operation, data stored in PLC ASCII files can be outputted to printers or message displays with a simple write
command to the GW1000.

Serial Interfacing
CHA – RS232, RS422 and RS485 Interface to DF1 (Full Duplex) device (SLC CH0)
CHB – DH-485 Non Isolated Interface
CHC – Future use
Physical Dimensions Configuration
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x Integrated web server for configuring communications
101.0mm) parameters.
Weight: 0.66lbs (0.3kg)
Indicators
Power: 9-27 VDC; Less than 2 Watts
Power
Installation DH+ status
Plastic enclosure; Freestanding or DIN rail mounting with Serial Status
integrated clip Serial RX
Serial TX
Environment
Ethernet Activity
Operating: +32 F to 122 F (0C to +50 C)
Ethernet Link
Storage: -40 F to +185 F (-40C to +85C)
Humidity: 5% to 95% non-condensing Pushbuttons
Reset
Protocols Configuration
A-B Channel: Allen-Bradley Data Highway Plus or Remote
Hardware
I/O
Connections – Top
Ethernet Channel: TCP/IP – 100-Base-T
– 3-pin power – 3.81mm pitch removable screw terminal
Serial Channel: DF1
plug
Communications – 3-pin A-B DH+/RIO – 5.08mm pitch removable screw
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and terminal plug
230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP – RJ45- Ethernet

Connections – Bottom
– 5-pin RS485/RS422 – 3.81mm pitch removable screw
terminal plug
– D9 – RS232 port
– USB

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.
DataLink Technologies

1465 Slater Road

Ferdale, WA, USA 98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-DH485E

Datalink Ethernet TCP/IP to DH-485

The Datalink GW1000-DH485E is a gateway between an Ethernet TCP/IP Network and AB’s DH-485 Network. This cost-
efficient solution extends the life of legacy Allen-Bradley PLC2, PLC3 and SLC/03s by eliminating the need to upgrade
each PLC with an Ethernet processor.
The DataLink GW1000 Controller enables users to run MMI applications or program/monitor PLCs & SLCs on a DH-485
Network from an Ethernet LAN station. Tested applications include RSLinx,RSLogix,RSView, Wonderware, & Citect.
The GW1000-DH485E combines the Lantronix Ethernet Microprocessor with DataLink’s DH-485 token-ring technology.

Compact and Lightweight:

The smallest, portable freestanding Din Rail serial interface available.

Easy Configuration:
All parameters are menu-driven.

Cost efficient:
Reduces the need to purchase an AB Ethernet Processor for each PLC/SLC.
Specifications:
Physical Dimensions Configuration
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x Integrated web server for configuring communications
118.3mm x 101.0mm) parameters.
Weight: 0.66lbs (0.3kg) Indicators
Power: 9-27 VDC; Less than 2 Watts Power
Installation DH+ status
Plastic enclosure; Freestanding or DIN rail mounting Serial Status
with integrated clip Serial RX
Environment Serial TX
Operating: +32 F to 122 F (0C to +50 C) Ethernet Activity
Storage: -40 F to +185 F (-40C to +85C) Ethernet Link
Humidity: 5% to 95% non-condensing Pushbuttons
Reset
Protocols Configuration
A-B Channel: Allen-Bradley Data Highway Plus or Hardware
Remote I/O Connections – Top
Ethernet Channel: TCP/IP – 100-Base-T – 3-pin power – 3.81mm pitch removable screw
Serial Channel: DF1Communications terminal plug
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, – 3-pin A-B DH+/RIO – 5.08mm pitch removable
and 230.4 Kbaud Ethernet Channel: 100-Base–T; screw terminal plug
TCP/IP – RJ45- Ethernet
Connections – Bottom
– 5-pin RS485/RS422 – 3.81mm pitch removable
screw terminal plug
– D9 – RS232 port
– USB

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.

DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-DH485M

Modbus Gateway to DH-485 Network

(Modbus to DH-485)

The DataLink GW1000-DH485M is a Modbus master/slave interface for computers, MMIs, and OEM based applications
that require access to a node on AB’s DH485 network. Highlights include palm-size portability, DC power, external Din
Rail cabinet with Modbus USB or serial functionality to DH-485.
The Modbus/DH485 can be set to be either a Master or a Slave on the Modbus serial link, as well as communicate using
either RTU or ASCII protocols.
The Modbus/DH485 in Master Mode can read from and write to registers and coils in any Modbus Slave device
connected. Slave Mode allows a Modbus Master device to read from or write to files in a A-B PLC or SLC connected to
the DH485 network.

Serial Interfacing
CHA – RS232, RS422 and RS485 Interface to DF1 (Full Duplex) device (SLC CH0)
CHB – DH-485 Non Isolated Interface
CHC – Future use
Specifications:
Physical Dimensions Configuration
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x Integrated web server for configuring communications
118.3mm x 101.0mm) parameters.
Weight: 0.66lbs (0.3kg) Indicators
Power: 9-27 VDC; Less than 2 Watts Power
Installation DH+ status
Plastic enclosure; Freestanding or DIN rail mounting Serial Status
with integrated clip Serial RX
Environment Serial TX
Operating: +32 F to 122 F (0C to +50 C) Ethernet Activity
Storage: -40 F to +185 F (-40C to +85C) Ethernet Link
Humidity: 5% to 95% non-condensing Pushbuttons
Reset
Protocols Configuration
A-B Channel: Allen-Bradley Data Highway Plus or
Remote I/O Hardware
Ethernet Channel: TCP/IP – 100-Base-T Connections – Top
Serial Channel: DF1 – 3-pin power – 3.81mm pitch removable screw
Communications terminal plug
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, – 3-pin A-B DH+/RIO – 5.08mm pitch removable
and 230.4 Kbaud Ethernet Channel: 100-Base–T; screw terminal plug
TCP/IPSerial channel: – RJ45- Ethernet
Connections – Bottom
– 5-pin RS485/RS422 – 3.81mm pitch removable
screw terminal plug
– D9 – RS232 port
– USB
DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.

DataLink Technologies

1465 Slater Road

Ferdale, WA, USA
98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/
GW1000-DH4851

DF1 to DH-485 Network (DH-485 DF1)

The DataLink GW1000-DH4851 is a Modbus master/slave interface for computers, MMIs, and OEM based applications
that require access to a node on AB’s DH485 network. Highlights include palm-size portability, DC power, external Din
Rail cabinet with Modbus USB or serial functionality to DH-485.
The Modbus/DH485 can be set to be either a Master or a Slave on the Modbus serial link, as well as communicate using
either RTU or ASCII protocols.
The Modbus/DH485 in Master Mode can read from and write to registers and coils in any Modbus Slave device
connected. Slave Mode allows a Modbus Master device to read from or write to files in a A-B PLC or SLC connected to
the DH485 network.

Serial Interfacing
CHA – RS232, RS422 and RS485 Interface to DF1 (Full Duplex) device (SLC CH0)
CHB – DH-485 Non Isolated Interface
CHC – Future use
Physical Dimensions Configuration
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x Integrated web server for configuring communications
101.0mm) parameters.
Weight: 0.66lbs (0.3kg)
Indicators
Power: 9-27 VDC; Less than 2 Watts
Power
Installation DH+ status
Plastic enclosure; Freestanding or DIN rail mounting with Serial Status
integrated clip Serial RX
Serial TX
Environment
Ethernet Activity
Operating: +32 F to 122 F (0C to +50 C)
Ethernet Link
Storage: -40 F to +185 F (-40C to +85C)
Humidity: 5% to 95% non-condensing Pushbuttons
Reset
Protocols Configuration
A-B Channel: Allen-Bradley Data Highway Plus or Remote
Hardware
I/O
Connections – Top
Ethernet Channel: TCP/IP – 100-Base-T
– 3-pin power – 3.81mm pitch removable screw terminal
Serial Channel: DF1
plug
Communications – 3-pin A-B DH+/RIO – 5.08mm pitch removable screw
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and terminal plug
230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IPSerial – RJ45- Ethernet
channel:
Connections – Bottom
– 5-pin RS485/RS422 – 3.81mm pitch removable screw
terminal plug
– D9 – RS232 port
– USB

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990.
Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley
Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products
have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And
Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows
3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below
average prices.
No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most
popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application
doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write
your own.

DataLink Technologies

1465 Slater Road

Ferdale, WA, USA 98248
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
http://www.datalinkconverters.com/