General Catalogue: Piping Systems

General
Catalogue
Piping Systems
Table of Contents
About GF Hakan Plastik 4-5
About Plastics 6-7
Certification Details 8-9
Building Technology (BT) Range
• Silenta Extreme 10-15
Fire Resistant and Noise-insulated Halogen
Free Piping Systems
• Silenta Premium 16-23
Sound-Insulated Piping Systems
• Silenta 3A 24-29
• Silenta FR Fire Resistant and 30-35
• HT-PP Soil and Waste Piping Systems 36-41
• PVC-U Soil and Waste Piping Systems 42-49
• Rain Gutters and Fittings 50-53
• GF Aquasystem PP-R & PP-RCT Piping Systems 54-65
• PE-RT Piping Systems 66
• PE-XA Piping Systems 67
• PE-XB Piping Systems 68-69
• Hoses 70-73
• Building Technology (BT) Soil and Waste 76-79
Pipe Range Installation Instructions
• Building Technology (BT) Product Range 81-85
Installation Instructions
Utility (UT) Range
• Corrugated Piping Systems 88-91
• PVC-U Drainage Piping Systems 92-93
• Polyethylene Piping Systems 94-95
• PVC-U 96-97
Pressurized Potable Water Piping Systems
• PVC-U 98-99
Deep-Well Pipes and Fittings
• Utility Product Range 102-109
Packing, Stocking and Shipment
• Packaging 111
• Storage 112
• Transportation 113
Technical Tables
• Temperature, Pressure and Service Time Tables 115
• Chemical Resistance Tables 116-127
GF Hakan Plastik Boru ve Profil Sanayi ve Ticaret A.Ş. reserves its right to change the
technical values and images contained in this brochure without prior notice. It does not
assume any responsibilties arising from printing errors.
About Us
4
Founded in Switzerland in 1802, Georg Fischer Corporation operates in
3 main business lines: GF Piping Systems, GF Casting Solutions and GF
Machining Solutions. Georg Fischer is present in 34 countries with 57
production plants and 136 companies.
GF Piping Systems, the largest business line of Georg Fischer Corporation,

is one of the leading companies in plastic and metal piping systems in
the world. GFPS produces system solutions and high quality components
for the secure transmission of water and gas in industries, utilities and
building technology. Reaching out to over 100 countries with its more than
30 production plants, GF Piping Systems acquired Hakan Plastik in 2013.
Founded in 1965, Hakan Plastik has achieved so many breakthroughs as

the first company that produced the silent pipe in Turkey and has reflected
the importance that it attaches to development and change to its products
and services as well.
GF Hakan Plastik has two production plants in Çerkezköy and Şanlıurfa.

With the acquisition by GF, global GF product and process standards
applicable worldwide have started to be applied. GF Hakan Plastik
operates in the fields of Building Technology (BT) and Utility (UT) in plastic
piping sector. Exporting its products to over 70 countries, the company
has 7 sales areas in Turkey.
GF Hakan Plastik Training and Technology Center provides all its

busienss partners with services with the aim of increasing the knowledge
and awareness in the sector through both technical and practical
trainings. Reaching out to a wider audience at the center such as the
professionals serving the sector, university students and installers and
providing diverse training and seminar programs for each stakeholder;
the products of GF Hakan Plastik are promoted and information is
provided about the accurate method of application of the products.
Our Market Segments Complete Solution Concept
Based on its experience and high production technology in Our wide range of products and services represent
the sector, GF Hakan Plastik supports its clients in each our complete solution concept.
phase of their projects.
With our products intended for diverse sectors, we offer
• Building Technology Projects • Utility Projects individual and comprehensive system solutions. Focusing
• Industrial Buildings • Irrigation Projects on the needs of projects, we optimize the processes and
applications integrated into the entire system.
We provide state-of-the-art technology by setting the standards

in the market at all times. We always stand by our business
partners through our experience in the piping systems and
reliable service network.
Our Presence in the World
As an industrial company that stands out with innovative and
With our presence as a global brand, we choose successful operations ever since our incorporation, we act as
to be closer to our clients. a solution point to meet all your needs based on our technical
knowledge, specialization and reliability.
GF Hakan Plastik exports its products to over 70 countries. As
Georg Fischer Piping Systems, we provide our clients in over
100 countries with fast response and services.
We act in compliance with the local standards in our over 30

production plants in Europe, Asia and the USA. We ensure fast
deliveries with our modern logistics organization deployed at
our local distribution hubs.
Benefits of Plastics
Plastics are polymers created by the chemical Thermoplastics in turn can be split into two main categories as
conversion of natural products or synthesized partially-regulated (semi-crystalline) and iregular (amorphous)
from organic materials. The primary components molecular structures.
that make up the building blocks of plastics are
long chains of carbon (C) and hydrogen (H) known • Semi
crystalline thermoplastics, which have a partially
as monomers. ordered molecular structure: this category includes the
polyolefins (polypropylene, polyethylene, polybutylene) and
The raw materials used for the production of plastics are fluoropolymers (PVDF, PTFE, etc.)
natural compounds such as cellulose, coal, oil and natural • Amorphous thermoplastics, which have no crystalline
gas. In the plastics industry, around 6 % of the petroleum regions and no packed molecular structure: this category
products that come out from refineries is used. includes the vinyl chlorides (PVC-U, PVC-C, etc.) and styrenes
(ABS, polystyrene, etc.]
Plastics fall into three main categories on the basis of their
internal structure and the resulting mechanical characteris Semicrystalline materials are more suitable for hot
tics: thermoplastics, thermosetting plastics and elastomers. welding, while amorphous thermoplastics are ideal for
cementing or cold welding (solvent cementing).
6
Advantages of Plastics
Thermoplastics obviously demonstrate different characteristics than those of the metals traditionally used
for piping.
Metal Systems Plastic Systems
High density Low density
* Crane needed for transport * Can be carried by hand up to d110
* Widely spaced fixings * Closely spaced fixings
* High anchoring forces, fixing required * Limited anchoring forces, simple and economic
Thermal conductivity Low thermal conductivity

* Insulation is always needed to limit heat loss * Limited heat loss
• Formation of condensation and resulting corrosion * • Low levels of condensation and resistance to corrosion
Corrosion Behaivors High Corrosion Resistance

• Galvanic corrosion may occur • No risk of galvanic corrosion risk
• Internal diameter is reduced due to corrosion • No corrosion and reduction of internal diameter
Reduction in internal diameter leads to pressure losses No pressure losses due to lack of reduction of internal diameter
Chemical resistance High chemical resistance

* Low resistance to acids, requiring use of costly alloys * In combination with correct jointing methods, at least 25 years of useful life
* Damage from incrustation can be warranted
* No incrustation
Service Life Analysis of Plastics

It is the total of all greenhouse gases emitted to the atmosphere during the entire lifetime including the processes for extracting a
product having carbon footprint from under the ground, refining, producing, using and disposing of that product.
The following graphics indicate the assessment of the lifetime According to the main results of the study, plastic piping
of thermoplastic piping systems in terms of the quality of their systems demonstrate better performance than metal systems.
environmental perfomance and application of them in building This finding has been confirmed by other studies conducted in
technology, industry and water and gas distribution. In the this field.
analysis, the impacts of one meter long pipe was compared
with the main competitor materials (DN25, DN80, DN150 and The main reason for high performance of thermoplastics is
DN400) for each of the commonly used plastics. GF supplied that they are lightweight. This ensures key benefits during
this analysis from an independent, Swiss-based organization transport and installation. Fully-plastic solutions are lighter
specialized in environmental performance analyzes, and is than other piping systems of conventional materials, and this
based on Ecoinvent, leading lifecycle inventory database in creates significant impacts on carbon footprint.
the world.
Disposal
İmha
Transport
Nakliye
25.0 Production of Pipes
Boruların Üretimi
Production of Raw Üretimi
Hammaddelerin Materials
20.0
2 eşdeğer
15.0
Kilogram equivalent
COCO
10.0
Kilogram
5.0
PVC-U
PVC-C
PP
PB
PE 100
ABS
0.0
PVDF
steel
steel
Coatedçelik
steel
çelik
çelik
Copper
Galvanized
Bakır
Kaplanmamış
Stainless
Galvenizli
Paslanmaz
Quality
Certificates
8
Manufacturing its products in accordance with
the European standards and Turkish standards Presenting its product standards in a way that offers the
equivalent to the European standards, our quality and continuity required for customers, GF Hakan
Company is a leading and dynamic organization Plastik exports its products to over 70 countries based on
in terms of continous improvement and customer these certificates.
satisfaction.
In addition to product quality, the process and system quality of
Some of the product quality certificates of our GF Hakan Plastik is certified by BVQI through TS EN ISO 9001:2015
Company are as follows: certificate and the company maintains its efforts on certification.
Our Company that places top priority on process and system
DVGW (Germany) - SKZ (Germany) - Hygiene Institute (Germany) quality also has TS EN ISO 14001:2015 and TS EN ISO 45001:2018
- Fraunhofer (Germany) - Nordic Polymark (Sweden) - AENOR certificates. Our both two production plants in Çerkezköy and
(Spain) - UkrSepro (Ukraine) - GOST (Russia) - SABS (South Şanlıurfa have TS EN ISO/IEC 17025:2017 laboratory accreditation
Africa) - TSE (Turkey) certificates awarded by TÜRKAK organization.
Certificates
SCANDINAVIAN COUNTRIES TURKEY RUSSIA-BELARUS

TURKEY- TSE SWEDCERT TÜRKAK UKRAINE GOST-r
RUSSIA-BELARUS
SPAIN GERMANY SWITZERLAND KAZAKHSTAN-
AFITI LICOF DIN CERTCO SGS KYRYGYZSTAN
ARMENIA
UKRAINE NETHERLANDS BULGARIA UK

KIWA BULGARKONTROLA WRAS
UKR - SEPRO
UKRAINE SCANDINAVIAN COUNTRIES HUNGARY

HYGIENE SWEDCERT KIWA RUSSIA
HUNGARY - EMI
HYGIENE
SOUTH AFRICA GERMANY- RUSSIA GERMANY

BUREAU VERITAS SABS HYGENE INSTITUT HOCH
SOUTH AFRICA UK TURKEY BULGARIA

SANAS LLOYD’S REGISTER EUROGAP NJN
TURKEY
MALAYSIA GERMANY
YILDIZ TECHNICAL GERMANY
IKRAM QA DVGV
UNIVERSITY REPORT DIBT
UNITED STATES OF GERMANY

AMERICA FRAUNHOFER SPAIN STN TC
NSF INSTITUTE AENOR
Silenta Extreme
Fire Resistant and Noise-insulated Halogen
Free Piping System
Silenta Extreme, is a new PP-based halogen-free, resistant to fire [B-s1, d0] and noise-insulated [18 dB(A)]
soil, waste water and drainage piping system, especially developed and being produced by the highest
technology for you to increase your building safety and comfort with its improved features and structure.
Due to its halogen-free feature, it does not emit any poisonous and lethal gases in case of fire.
It is manufactured with the last generation of multilayer polypropylene technology according to the
requirements of EN 1451, EN 13501 and DIN EN 14366 standards.
Special Differentiating Features

• Halogen-free structure • Superior chemical resistance
• Zero toxicity, no emission of poisonous and lethal • Smooth inner surface, no incrustations
gases in case of fire • High temperature resistant up to 97 °C
• Fire resistant with B-s1; d0 fire classification • UV protected external layer
• Soundproof multilayer structure with 18dB(A) noise • 100% recyclable, and environmental-friendly
level at 4 l/s flow rate • Easy installation and application
• High impact resistance • Adds value to the property
• Excellent corrosion resistance and long service life
Fields of Application
• All soil and waste water drainage systems inside the buildings • Rainwater systems
• Office buildings, conference halls etc. • Sustainable / green buildings
• Schools, libraries, hospitals, hotels, houses • Industrial areas (short and long-term use)
• All underground drainage systems between the building
and the main pipeline
Fire Classification:
Halogen (acc. to EN 13501-1) B-s1, d0
Free PP B : Hardly Combustible
s1 : No Smoke formation
d0 : No Burning Droplets formation
18 dB(A)
10
Structure
Internal Layer (PP)
[Flame Retardant Reinforced Composite]
It provides a perfect flow performance with its
1 smooth inner surface and anti-fouling structure.
The superior chemical resistance prevents
corrosion and abrasion. It is resistant to high
water temperatures (up to 97 °C). Fire Resistant.
Middle Layer (PP)

[Flame Retardant and Mineral Reinforced Composite]
Thanks to the its high molecular structure and
2 special composite formula which contains flame
retardants (FR) and mineral reinforcement; it
has perfect fire resistant and noise insulated
performance. Sound-proof.
External Layer (PP)
3 [Flame Retardant and UV Reinforced Composite]

Perfect Shield: for Fire and impacts. Protection
layer for UV. Fire Resistant.
Special Gasket System

It guarantees water tightness with its special
4 gasket structure which also provides easy

assembly. The geometrical features of the gasket
groove and structure ensure fast and easy
Technical Properties installation.
Pipe Structure 3-Layers, Polypropylene based, halogen free composite structure

Diameters [mm] d50, d75, d110, d125, d160, d200
Pipe Length [mm] 150, 250, 500, 1000, 2000, 3000
Acoustic Performance 18 dB(A) at 4 l/s flow rate (DIN EN 14366)
Fire Class B-s1,d0 (EN 13501)
Joining Type/Method Rubber Gasket and Socket (Push-Fit)
Clamping With GF Hakan Silent pipe clamps
Color Dark Blue (RAL 5017)
Installation With GF Hakan Silent pipe clamps
Thermal Expansion Coefficient 0.06 mm/moK
Tensile Strength 13 N/mm2
Chemical Resistance Resistant to the organic and inorganic acids suitable for pH values between 2-12
Installation Temperature Minimum: -10 °C Maximum: +97 °C
Operating Temperature Minimum: -10 °C Maximum: +97 °C
Application Class B/D (building / drainage)
Ring Stiffness ISO/DIN 9969, Ring Stiffness is minimum 4,0 kN/m2 in all dimension ranges between
d50 and d200 mm
Impact Resistance Complies with EN 1451
Halogen Acid Gas Formation 0,24 mg/g
(During fire or combustion) To be classified as “halogen-free”, a product or a substance must consist of less than:
• 900 parts per million (ppm) or 0,9 mg/g of chlorine or,
• 900 parts per million (ppm) or 0,9 mg/g of bromine and,
• 1500 ppm or 1,5mg/g of total halogens,
according to the International Electrochemical Commission (IEC), Restriction Use of Halogen
(IEC 61249-2-21) Directive.
Approvals And Certificates Approvals and Certificates: Afiti-Licof (Spain): Fire Classification Report, Fraunhofer (Germany):
Acoustic Performance Report, TSE (Turkey): Halogen free test report
Superior Sound Proof
Performance
Fire Resistant and Noise-insulated Halogen Free Piping System
guarantees quality, peace of mind and living comfort.
Acoustic performance of Silenta Extreme was accredited by the famous German

Fraunhofer Institute, in compliance with DIN 4109 and EN 14366.
Noise measurement tests were carried out at Fraunhofer Physical Constructions

Institute in Stuttgart, the most accredited European laboratory on noise studies on
buildings. The acoustic performance tests were conducted in compliance with the
standard DIN EN 14366.
The emitted noise level at 4l/s flow rate, with special GF Hakan Silent clamps, is only
18 dB(A) according to DIN EN 14366.
SILENTA EXTREME
ACOUSTIC PERFORMANCE dB(A)
17 18 dB(A)
dB(A)
11 12 dB(A)
dB(A)
0,5 l/s
1 l/s
Water flow (l/s) 2 l/s
4 l/s
12
Silenta Extreme
Silenta Extreme Pipe with Socket Silenta Extreme Elbow 15°
Dia Leng. Thick. Code Packing Dia Code Packing

[mm] [mm] [mm] Type Pc [mm] Type Pc
50 150 2.0 5504005000121 Cartonbox 200 50 5604105000121 Cartonbox 300

50 1000 2.0 5504005000421 Bundle 10 160 5604116000121 Cartonbox 60
50 2000 2.0 5504005000521 Bundle 10
50 3000 2.0 5504005000621 Bundle 10
75 150 2,6 5504007500121 Cartonbox 100 Silenta Extreme Elbow 30°
75 250 2,6 5504007500221 Cartonbox 70
75 500 2,6 5504007500321 Cartonbox 40 Dia Code Packing
[mm] Type Pc
75 1000 2,6 5504007500421 Bundle 10
75 2000 2,6 5504007500521 Bundle 10 50 5604105000221 Cartonbox 350
110 150 3,4 5504011000121 Cartonbox 45 110 5604111000221 Cartonbox 60
110 500 3,4 5504011000321 Cartonbox 20
110 1000 3,4 5504011000421 Bundle 4
Silenta Extreme Elbow 45°
110 2000 3,4 5504011000521 Bundle 4
110 3000 3,4 5504011000621 Bundle 4
Dia Code Packing
125 150 3,4 5504012500121 Cartonbox 40 [mm] Type Pc
125 250 3,4 5504012500221 Cartonbox 20
50 5604105000321 Cartonbox 300
125 500 3,4 5504012500321 Cartonbox 16
75 5604107500321 Cartonbox 150
125 1000 3,4 5504012500421 Bundle 4
110 5604111000321 Cartonbox 50
125 2000 3,4 5504012500521 Bundle 4
125 5604112500321 Cartonbox 40
125 3000 3,4 5504012500621 Bundle 4
160 5604116000321 Cartonbox 20
160 150 4,0 5504016000121 Cartonbox 24
200 5604120000321 Cartonbox 10
160 250 4,0 5504016000221 Cartonbox 14
160 500 4,0 5504016000321 Cartonbox 8
160 1000 4,0 5504016000421 Bundle 1
Silenta Extreme Elbow 67,5°
160 2000 4,0 5504016000521 Bundle 1
160 3000 4,0 5504016000621 Bundle 1 Dia Code Packing
200 500 4,5 5504020000321 Bundle 5 [mm] Type Pc

Silenta Extreme Elbow 87,5°
Dia Code Packing

Silenta Extreme Pipe without Socket [mm] Type Pc
50 5604105000521 Cartonbox 300

Dia Leng. Thick. Code Packing
[mm] [mm] [mm] Type Pc 75 5604107500521 Cartonbox 100
110 5604111000521 Cartonbox 40
200 500 4,5 5504020005221 Cartonbox 8
125 5604112500521 Cartonbox 30
200 1000 4,5 5504020005321 Length 1
160 5604116000521 Cartonbox 15
200 2000 4,5 5504020005421 Length 1
200 5604120000521 Cartonbox 6
200 3000 4,5 5504020005521 Length 1
Silenta Extreme Long Elbow 45°
Dia Code Packing

Silenta Extreme Clamp [mm] Type Pc
110 5604111004521 Cartonbox 8

Dia Code Packing
[mm] Type Pc
50 5601905001022 Cartonbox 100 Silenta Extreme Long Socket

75 5601907501122 Cartonbox 200
110 5601911001222 Cartonbox 100 Dia Code Packing
[mm] Type Pc
125 5601912501322 Cartonbox 100
160 5601916001422 Cartonbox 50 110 5604911002221 Cartonbox 15
Silenta Extreme
Silenta Extreme Branch 45° Silenta Extreme Corner Double Branch 87,5°
Dia Code Packing Dia Code Packing

[mm] Type Pc [mm] Type Pc
50-50 5604205000121 Cartonbox 150 110-110 5604211000821 Cartonbox 20

75-50 5604207500121 Cartonbox 75
75-75 5604207500221 Cartonbox 60
110-50 5604211000121 Cartonbox 40
110-75 5604211000221 Cartonbox 30
110-110 5604211000321 Cartonbox 20
125-50 5604212500121 Cartonbox 30 Silenta Extreme Reducer
125-75 5604212500221 Cartonbox 25
125-110 5604212500321 Cartonbox 20 Dia Code Packing
[mm] Type Pc
125-125 5604212500421 Cartonbox 16
Silenta Extreme Branch 67,5°
Dia Code Packing

[mm] Type Pc
Silenta Extreme Socket with
110-110 5604211001121 Cartonbox 25 Central Register
Dia Code Packing

[mm] Type Pc
Silenta Extreme Branch 87,5°
50 5604505000121 Cartonbox 400
Dia Code Packing 75 5604507500121 Cartonbox 200
[mm] Type Pc 110 5604511000121 Cartonbox 80
50-50 5604205000221 Cartonbox 150 160 5604516000121 Cartonbox 30
75-75 5604207500421 Cartonbox 80
110-50 5604211000421 Cartonbox 50
110-75 5604211000521 Cartonbox 30
110-110 5604211000621 Cartonbox 30
125-110 5604212503822 Cartonbox 20
125-125 5604212500521 Cartonbox 20 Silenta Extreme Sliding Socket
160-110 5604216000521 Cartonbox 20
160-125 5604216004022 Cartonbox 20 Dia Code Packing
[mm] Type Pc
160-160 5604216000421 Cartonbox 10
50 5604505000221 Cartonbox 400
75 5604507500221 Cartonbox 200
Silenta Extreme Double Branch 45° 110 5604511000221 Cartonbox 80
160 5604516000221 Cartonbox 30
[mm] Type Pc
50-50 5604205000321 Cartonbox 100

75-50 5604207500521 Cartonbox 80
110-50 5604211000921 Cartonbox 35
110-110 5604211001021 Cartonbox 40
160-110 5604216000621 Cartonbox 8 Silenta Extreme Pipe Socket Plug
Dia Code Packing

[mm] Type Pc
Silenta Extreme Double Branch 87,5°
50 5604905000121 Cartonbox 1000
14
Silenta Extreme
* Silenta Extreme S Siphon 45° Silenta Extreme P-Trap
Dia Code Packing Dia Code Packing

[mm] Type Pc [mm] Type Pc

110 5604611000121 Cartonbox 20
Silenta Extreme Floor Trap
Dia Code Packing

[mm] Type Pc
110-75-50-50 5604911002022 Cartonbox 12
* Silenta Extreme S Siphon 87,5°
Dia Code Packing

[mm] Type Pc
Silenta Extreme Floor Trap - Long
75 5604607500221 Cartonbox 50 Dia Code Packing

110 5604611000221 Cartonbox 15 [mm] Type Pc
110-75-50-50 5604911002122 Cartonbox 12
Silenta Clamp Metal - Vertical Set
Dia Code Packing

[mm] Type Pc
Silenta Extreme Clean Out
(Round Cover) 50 1300905030412 Cartonbox 20
75-78 1300907530412 Cartonbox 15
200 1300920030412 Cartonbox 5
Silenta Clamp Metal - Horizontal
Dia Code Packing

[mm] Type Pc
Silenta Extreme Clean Out
(Rectangle Cover) 50 1300905030612 Cartonbox 50
75-78 1300907530612 Cartonbox 30
[mm] Type Pc
125 1300912530612 Cartonbox 25
* To be used only under the WC stone

Silenta Premium
Silenta Premium is a sound-insulating 3-layered sewer pipe system made of PP material which is specially
formulated and reinforced for non-pressurized domestic drainage in accordance with System Standards of EN
1451, DIN 4109 and DIN 4102.
• Silenta Premium Sound-Insulated Pipe Systems providing • Provides excellent sound insulation, creates ideal conditions
a complete solution with advanced level durability, impact for buildings and contributes to an increase in the property value
resistance, low sound level and easy installation features have along with the quality of life. Reduces the vibrations and unfamiliar
considerably wide product range sounds coming from the plumbing system
• It reached 13 dB(A) sound intensity level at the flow rate of 4 l/s in • It is suitable for hot/cold water and acidic liquid transfers.
the tests conducted by the German Fraunhofer Institute according • No corrosion, durable
to EN 14366 • Alternative to cast iron pipes
• It can be used in the underground and aboveground drainage • Does not contain halogen and emit lethal and poisonous gases
systems even in the areas having high traffic load • 100% recyclable and environmentally friendly
• Office buildings, conference halls etc
• Schools, libraries, hospitals, hotels, houses
• All underground drainage systems between the building and the
main pipeline
• Sustainable / green buildings
• Industrial areas (short and long-term use)
13 dB(A)
16
STRUCTURE
Inner Layer
It provides a perfect flow performance
1 with its structure. The superior chemical
resistance prevents corrosion and abrasion.
It is resistant to high water temperatures.
Middle Layer
2 With its high molecular structure and
special composite formula, the sound waves
are absorbed and prevented.
3 Outer Layer
It is resistant to high temperatures and
impacts.
4 gasket structure providing ease of montage.
The geometrical properties of the gasket
groove ensure fast and easy installation.
Technical Properties
Pipe Structure 3-Layered (Special PP-Mineral reinforced composite)
Diameters [mm] d58, d78, d90, d110, d135, d160, d200
Pipe length [mm] 150, 250, 500, 1000, 2000, 3000
Sound transmission 13 dB(A) at 4 l/s (EN 14366)
Fire class B2 (DIN 4102)
Jointing method Jointing with Rubber Gasket and Socket (Push-Fit)
Color Light Grey (Halogen-free and Cadmium-free)
Installation Very easy to install thanks to its weight lower than cast-iron pipes
Thermal expansion coefficient 0.04 mm/moK
Tensile strength 13 N/mm2
Chemical resistance Resistant to organic and inorganic chemical environments for pH values between 2 and 12
Installation temperature Minimum: -10oC Maximum: 60oC
Operating temperature Minimum: -10oC Maximum: 97oC
Application class B/D (building / drainage)
Ring Stifness ISO/DIN 9969, The ring stiffness is at least 4.0 kN / m2 over the entire range of – dimensions: 58 mm – 200 mm
Impact strength Complies with EN 1451
Approvals and Certificates Germany: DIBt, Fraunhofer, Hoch, Ukraine: Sepro, Russia: Gost, Malaysia: Ikram, Turkey: TSE
Superior Sound-Proof
Performance
Sound-insulated soil and waste water pipe system Silenta Premium guarantees
quality, peace of mind and living comfort.
Acoustic performance of Silenta Premium was accredited by the famous German

Fraunhofer Institute, in compliance with DIN 4109 and EN 14366.
Noise measurement tests were carried out at Fraunhofer Physical Constructions

Institute in Stuttgart, the most accredited European laboratory on noise studies on
buildings. The acoustic performance tests were conducted in compliance with the
standard DIN EN 14366.
The emitted noise level at 4l/s flow rate, with special GF Hakan Silent clamps, is
only 13 dB(A) according to DIN EN 14366.
SILENTA PREMIUM
13 dB(A)
7 dB(A)
7 dB(A)
4 dB(A)
0,5 l/s
1 l/s
4 l/s
18
Silenta Premium
Silenta Premium Pipe with Socket Silenta Premium Elbow 15°
Dia. Leng. Thick. Code Packing Dia. Code Packing

[mm] [mm] [mm] Type Pc (mm) Type Pc
78 150 4,5 4401007801021 Cartonbox 40
78 250 4,5 4401007801121 Cartonbox 12
78 500 4,5 4401007801221 Cartonbox 16
78 1000 4,5 4401007801321 Bundle 6

Silenta Premium Elbow 300
78 2000 4,5 4401007801421 Bundle 6
78 3000 4,5 4401007801521 Bundle 6 Dia. Code Packing
90 150 4,5 4401009002021 Cartonbox 36 (mm) Type Pc
90 250 4,5 4401009002121 Cartonbox 24
58 4501105800421 Cartonbox 120
90 500 4,5 4401009002221 Cartonbox 12
78 4501107800221 Cartonbox 70
110 150 5,3 4401011003021 Cartonbox 9
160 4501116001121 Cartonbox 8
110 250 5,3 4401011003121 Cartonbox 12
110 500 5,3 4401011003221 Cartonbox 8
110 1000 5,3 4401011003321 Bundle 4

110 2000 5,3 4401011003421 Bundle 4
110 3000 5,3 4401011003521 Bundle 4 Silenta Premium Elbow 45°
135 150 5,3 4401013504021 Cartonbox 12
Dia. Code Packing
135 250 5,3 4401013504121 Cartonbox 8
(mm) Type Pc
135 500 5,3 4401013504221 Cartonbox 5
58 4501105800121 Cartonbox 50
135 1000 5,3 4401013504321 Bundle 4
78 4501107800321 Cartonbox 60
135 2000 5,3 4401013504421 Bundle 4
90 4501109000321 Cartonbox 32
135 3000 5,3 4401013504521 Bundle 4
110 4501111000721 Cartonbox 20
160 150 5,3 4401016005021 Cartonbox 10
135 4501113501021 Cartonbox 5
160 250 5,3 4401016005121 Cartonbox 6
160 4501116001221 Cartonbox 8
160 500 5,3 4401016005221 Cartonbox 4
200 4501120001421 Cartonbox 4
160 1000 5,3 4401016005321 Length 1
160 2000 5,3 4401016005421 Length 1
160 3000 5,3 4401016005521 Length 1
200 500 6,2 4401020006021 Cartonbox 5
200 1000 6,2 4401020006121 Length 1 Silenta Premium Elbow 67,5°

200 2000 6,2 4401020006221 Length 1
200 3000 6,2 4401020006321 Length 1 Dia. Code Packing
(mm) Type Pc
58 4501105800521 Cartonbox 100

Silenta Premium Pipe without Socket 78 4501107800521 Cartonbox 50
90 4501109000521 Cartonbox 32
Dia. Leng. Thick. Code Packing 110 4501111000821 Cartonbox 16
[mm] [mm] [mm] Type Pc
58 3000 4,0 4401005810621 Bundle 8

58 5000 4,0 4401005810821 Bundle 8
78 3000 4,5 4401007811521 Bundle 6
Silenta Premium Elbow 87,5°
78 5000 4,5 4401007811721 Bundle 6
90 3000 4,5 4401009002521 Bundle 6 (mm) Type Pc
160 3000 5,3 4401016015521 Length 1 135 4501113501121 Cartonbox 12
200 1000 6,2 4401020016121 Length 1
200 2000 6,2 4401020016221 Length 1
200 3000 6,2 4401020016321 Length 1
Silenta Premium
Silenta Premium Long Elbow 45° Silenta Premium Branch 45°
Dia. Code Packing Dia. Code Packing

(mm) Type Pc (mm) Type Pc
110 4501111001321 Cartonbox 8 58-58 4501205800121 Cartonbox 20

78-58 4501207800221 Cartonbox 30
78-78 4501207800321 Cartonbox 20
90-58 4501209000121 Cartonbox 8
90-90 4501209000321 Cartonbox 14
110-58 4501211000421 Cartonbox 18
110-78 4501211000521 Cartonbox 14
Silenta Premium Siphon Elbow 87,5°
110-110 4501211000621 Cartonbox 10
135-78 4501213500721 Cartonbox 10
Dia. Code Packing
(mm) Type Pc 135-110 4501213500821 Cartonbox 6
135-135 4501213500921 Cartonbox 5
58-40 4501105830621 Cartonbox 140
160-110 4501216001021 Cartonbox 5
160-135 4501216001121 Cartonbox 4
160-160 4501216001221 Cartonbox 3
200-110 4501220001421 Cartonbox 2
200-135 4501220001521 Cartonbox 2
Silenta Premium Clean Out Elbow 87,5° 200-160 4501220001621 Cartonbox 1
200-200 4501220001721 Cartonbox 3
Dia. Code Packing
(mm) Type Pc
110 4501311001121 Cartonbox 15

Silenta Premium Branch 67,5°
Dia. Code Packing

(mm) Type Pc
58-58 4501207805021 Cartonbox 18

78-58 4501207805021 Cartonbox 30
78-78 4501207805521 Cartonbox 20
110-58 4501211001021 Cartonbox 18
110-78 4501211001121 Cartonbox 14
110-110 4501211000721 Cartonbox 12
20
Silenta Premium
Silenta Premium Branch 87,5° Silenta Premium Clean Out Tee

90-58 4501209006121 Cartonbox 18
90-78 4501209006221 Cartonbox 15
90-90 4501209006321 Cartonbox 12
110-58 4501211006321 Cartonbox 18
110-78 4501211006421 Cartonbox 15
110-90 4501211006621 Cartonbox 15 Silenta Premium Corner Double Branch 87,5°
110-110 4501211006521 Cartonbox 12
135-110 4501213506621 Cartonbox 8 Dia. Code Packing
135-135 4501213506721 Cartonbox 6 (mm) Type Pc

160-160 4501216006921 Cartonbox 4
Silenta Premium Radius Branch 87,5° (Swept)
Dia. Code Packing Silenta Premium Corner Radius

(mm) Type Pc Double Branch 87,5° (Swept)
90-90 4501209030621 Cartonbox 16
110-90 4501211031321 Cartonbox 8
Dia. Code Packing
(mm) Type Pc
110-110 4501211031221 Cartonbox 8
90-90 4501209030721 Cartonbox 12
Silenta Premium Double Branch 45°
Dia. Code Packing

(mm) Type Pc Silenta Premium Socket Plug
110-110 4501211004121 Cartonbox 8

Dia. Code Packing
160-110 4501216004321 Cartonbox 3
58 4501905800121 Cartonbox 25
78 4501907800221 Cartonbox 50
90 4501909000321 Cartonbox 50
110 4501911000321 Cartonbox 20
135 4501913500421 Cartonbox 40
Silenta Premium Double Branch 87,5°
160 4501916000521 Cartonbox 12
Dia. Code Packing
(mm) Type Pc
90-90 4501209007021 Cartonbox 8
110-110 4501211007021 Cartonbox 10

Silenta Premium
Silenta Premium Reducer Silenta Premium Adaptor


78-58 4501407800221 Cartonbox 40
78-75 4501407800321 Cartonbox 25
90-58 4501409000121 Cartonbox 80
90-78 4501409000221 Cartonbox 32
110-58 4501411000421 Cartonbox 25
110-78 4501411000521 Cartonbox 50
110-90 4501411000621 Cartonbox 40 Silenta Premium Repair Pipe (Long Socket)
135-110 4501413500621 Cartonbox 10
ilenta Premium Socket with

S
Central Register
Dia. Code Packing Silenta Premium Clean Out (Circular)

(mm) Type Pc
58 4501505803021 Cartonbox 25
Dia. Code Packing
78 4501507803121 Cartonbox 15 (mm) Type Pc
90 4501509003121 Cartonbox 45
58 4501305800421 Cartonbox 50
110 4501511003221 Cartonbox 36
78 4501307800521 Cartonbox 28
135 4501513503321 Cartonbox 20
90 4501309000121 Cartonbox 12
160 4501516003421 Cartonbox 6
200 4501520003521 Cartonbox 4
Silenta Premium Sliding Socket
Dia. Code Packing

(mm) Type Pc Silenta Premium Clean Out (Rectangular)
58 4501505804021 Cartonbox 12
78 4501507804121 Cartonbox 16 Dia. Code Packing
(mm) Type Pc
110 4501511004221 Cartonbox 15
22
Silenta Premium
* Silenta Premium S Siphon 45°

Silenta Premium Collector 4xd58 Out
Silenta Premium Double Branch 87°

(4x58 mm Outlet)
Dia. Code Packing

* Silenta Premium S Siphon 87,5° (mm) Type Pc
110 4501211014121 Cartonbox 2

Dia. Code Packing
(mm) Type Pc
110 4501611000221 Cartonbox 7 Silenta Premium Double Branch 87,5°

(5x58 mm Outlet)
Dia. Code Packing

(mm) Type Pc
110 4501211013121 Cartonbox 2
Silenta Premium Floor Trap

Silence Clamp Metal - Vertical Set
Dia. Code Packing
(mm) Type Pc
Dia Code Packing
110-78-58-58 4501911030322 Cartonbox 12 (mm) Type Pc
50 1300905030412 Cartonbox 20
58 1300905830412 Cartonbox 20
75-78 1300907530412 Cartonbox 15
110 1300911030412 Cartonbox 10
135 1300913530412 Cartonbox 10
160 1300916030412 Cartonbox 7
Silenta Premium Floor Trap - Long 200 1300920030412 Cartonbox 5
Dia. Code Packing
(mm) Type Pc
110-78-58-58 4501911030622 Cartonbox 12

Silence Clamp Metal - Horizontal
Dia. Code Packing

(mm) Type Pc
50 1300905030612 Cartonbox 50
58 1300905830612 Cartonbox 30
Silenta Premium P - Trap 75-78 1300907530612 Cartonbox 30
Dia. Code Packing 110 1300911030612 Cartonbox 25
(mm) Type Pc 135 1300913530612 Cartonbox 25
200 1300920030612 Cartonbox 20
Silenta Premium Aerator
Dia. Code Packing

(mm) Type Pc
110-110-78 4501911000121 Cartonbox 2

Silenta 3A
Silenta 3A is a sound-insulating 3-layered soil and waste water pipe system made of PP material which
is specially formulated and reinforced for non-pressurized domestic drainage in accordance with System
Standards of DIN EN 1451, DIN 4109 and DIN 4102. Silenta 3A has high performance in all places that require
impact, durability and sound protection.
• Silenta 3A Sound-Insulated Piping System reached 16 dB(A) • Alternative to cast iron

sound intensity level at the flow rate of 4 l/s in the tests conducted • No corrosion, durability
by the German Fraunhofer Institute according to EN 14366 • It has a wide product range
• Suitable for hot/cold water and acidic liquid transfers • Does not contain halogen and emit lethal and poisonous gases in
• It can be used in the underground and aboveground drainage case of fire
systems even in the areas having high traffic load. It has high • 100% recyclable and environmentally friendly
impact resistance
• All underground drainage systems between the building and the
main pipeline
16 dB(A)
24
Structure
1 Inner Layer
structure. The superior chemical resistance
prevents corrosion and abrasion. It is resistant
to high water temperatures.
2 Middle Layer
With its high molecular structure and special
composite formula, the sound waves are
absorbed and prevented.
3 Outer Layer
It is resistant to high temperatures and impacts.
4 Special Gasket System

gasket structure providing ease of montage.
The geometrical properties of the gasket groove
ensure fast and easy installation.
Pipe Structure 3-Layered (Special PP-Mineral reinforced composite)
Pipe length [mm] 150, 250, 500, 1000, 2000, 3000
Sound transmission 16 dB(A) at 4 l/s (TS EN 14366)
Clamping With GF Hakan Plastic silent pipe clamps
Color Light Blue (Halogen-free and Cadmium-free)
Thermal expansion coefficient 0.06 mm/moK
Tensile strength 13 N/mm2
Chemical resistance Resistant to organic and inorganic chemical environments for pH values between 2 and 12
Installation temperature Minimum: -10oC Maximum: 60oC
Operating temperature Minimum: -10oC Maximum: 97oC
Application class B/D (building / drainage)
Impact strength Complies with EN 1451
Approvals and Certificates Germany: Fraunhofer, Hoch, Spain: AENOR, Sweden: Kiwa/SwedCert,
Ukraine: Sepro, Russia: Gost, UK: LR Lloyd Register, Malaysia: Ikram, Turkey: TSE
Superior Sound Proof
Performance
Sound-insulated soil and waste piping system Silenta 3A
guarantees quality, peace of mind and living comfort.
Acoustic performance of Silenta 3A was accredited by the famous

German Fraunhofer Institute, in compliance with DIN 4109 and EN 14366.
Noise measurement tests were carried out at Fraunhofer Physical

Constructions Institute in Stuttgart, the most accredited
European laboratory on noise studies on buildings.
The acoustic performance tests were conducted in
compliance with the standard DIN EN 14366.
16 dB(A)
The emitted noise level at 4l/s flow rate is only

16 dB(A) according to DIN EN 14366.
SILENTA 3A
9 dB(A)
8 dB(A)
7 dB(A)
0,5 l/s
1 l/s
2 l/s
26
Silenta 3A
Silenta 3A Pipe with Socket

Silenta 3A Clamp

40 3000 1,8 4604004000621 Bundle 10
50 150 2,0 4604005000121 Cartonbox 200 Silenta 3A Elbow 15°
50 250 2,0 4604005000221 Cartonbox 150
Dia. Code Packing
50 1000 2,0 4604005000421 Bundle 10
50 4704105000121 Cartonbox 300
50 2000 2,0 4604005000521 Bundle 10
75 4704107500621 Cartonbox 150
50 3000 2,0 4604005000621 Bundle 10
110 4704111001121 Cartonbox 60
75 150 2,6 4604007501021 Cartonbox 40
160 4704116001121 Cartonbox 20
75 250 2,6 4604007501121 Cartonbox 30
75 500 2,6 4604007501221 Cartonbox 40
75 1000 2,6 4604007501321 Bundle 10 Silenta 3A Elbow 30°

75 2000 2,6 4604007501421 Bundle 10
Dia. Code Packing
75 3000 2,6 4604007501521 Bundle 10 (mm) Type Pc
110 150 3,4 4604011002021 Cartonbox 20
50 4704105000221 Cartonbox 350
110 250 3,4 4604011002121 Cartonbox 35
75 4704107500721 Cartonbox 150
110 500 3,4 4604011002221 Cartonbox 20
110 4704111001221 Cartonbox 60
110 1000 3,4 4604011002321 Bundle 4
160 4704116001221 Cartonbox 20
110 2000 3,4 4604011002421 Bundle 4
110 3000 3,4 4604011002521 Bundle 4
125 150 3,4 4604012503021 Cartonbox 15 Silenta 3A Elbow 45°
125 250 3,4 4604012503121 Cartonbox 5 Dia. Code Packing

160 1000 4,0 4604016004321 Bundle 1
160 2000 4,0 4604016004421 Bundle 1
160 3000 4,0 4604016004521 Bundle 1 Silenta 3A Elbow 67,5°
200 1000 4,5 4604020006421 Length 1 (mm) Type Pc

110 4704111001421 Cartonbox 50
Silenta 3A Elbow 87,5°

Dia. Code Packing
(mm) Type Pc
50 4704105000521 Cartonbox 150

75 4704107501021 Cartonbox 50
110 4704111001521 Cartonbox 40
125 4704112501721 Cartonbox 10
Silenta 3A Pipe without Socket 160 4704116001921 Cartonbox 6
200 4704120002121 Cartonbox 6
Dia. Leng. Thick. Code Packing
[mm] [mm] [mm] Type Pc
200 500 4,5 4604020005221 Cartonbox 8 Silenta 3A Long Elbow 45°
200 1000 4,5 4604020005321 Length 1 Dia. Code Packing
200 2000 4,5 4604020005421 Length 1 (mm) Type Pc

Silenta 3A
Silenta 3A Branch 45° Silenta 3A Reducer

(mm) Type Pc
(mm) Type Pc
125-75 4704212500821 Cartonbox 10
160-110 4704416000521 Cartonbox 20
125-110 4704212500921 Cartonbox 8
160-125 4704416000721 Cartonbox 20
125-125 4704212501021 Cartonbox 6
200-160 4704420000621 Cartonbox 10
160-110 4704216001121 Cartonbox 10
160-125 4704216001221 Cartonbox 10
160-160 4704216001321 Cartonbox 8
200-110 4704220001421 Cartonbox 4
200-125 4704220001521 Cartonbox 4 Silenta 3A Socket with Central Register
200-160 4704220001621 Cartonbox 4
Dia. Code Packing
50 4704505000121 Cartonbox 50
75 4704507500221 Cartonbox 20
110 4704511000321 Cartonbox 10
160 4704516000421 Cartonbox 6
200 4704520000521 Cartonbox 12
Silenta 3A Branch 67,5°
Dia. Code Packing

(mm) Type Pc
110-110 4704211000721 Cartonbox 25

Silenta 3A Sliding Socket
Dia. Code Packing

(mm) Type Pc
50 4704505000221 Cartonbox 50
Silenta 3A Branch 87,5°
75 4704507500321 Cartonbox 35
Dia. Code Packing 110 4704511000421 Cartonbox 8
(mm) Type Pc 160 4704516000621 Cartonbox 6
75-50 4704207501921 Cartonbox 10
75-75 4704207502021 Cartonbox 15
110-50 4704211002121 Cartonbox 50
110-75 4704211002221 Cartonbox 15
110-110 4704211002321 Cartonbox 10
125-110 4704212503822 Cartonbox 20 Silenta 3A Pipe Socket Plug
125-125 4704212503921 Cartonbox 4
(mm) Type Pc
50 4704905000421 Cartonbox 125

75 4704907500121 Cartonbox 50
110 4704911000221 Cartonbox 25
160 4704916000321 Cartonbox 12
Silenta 3A Double Branch 45°
Dia. Code Packing

(mm) Type Pc
50-50 4704205003021 Cartonbox 15

* Silenta 3A S Siphon 45°
75-50 4704207503121 Cartonbox 15
110-50 4704211003221 Cartonbox 7
Dia. Code Packing
160-110 4704216003621 Cartonbox 8
75 4704607500121 Cartonbox 20
110 4704611000121 Cartonbox 6
28 * To be used only under the WC stone

Silenta 3A
Silenta 3A Corner Double Branch 87,5° * Silenta 3A S Siphon 87,5°


110 4704611000221 Cartonbox 5
Silenta 3A Clean Out (Circular)

Silenta 3A Repair Pipe (Long Socket)
Dia. Code Packing
Dia. Code Packing (mm) Type Pc
(mm) Type Pc
75 4704311000421 Cartonbox 80
110 4704911002221 Cartonbox 15
Silenta 3A Floor Trap

Dia. Code Packing Silenta 3A Clean Out (Rectangular)
(mm) Type Pc
Dia. Code Packing
110-75-50-50 4704911002022 Cartonbox 12 (mm) Type Pc
110 4704311000121 Cartonbox 30

160 4704316000221 Cartonbox 8
Silenta 3A P-Trap
Dia. Code Packing
(mm) Type Pc
110 4704611000521 Cartonbox 25
Silenta 3A Floor Trap - Long

Dia. Code Packing
(mm) Type Pc
110-75-50-50 4704911002122 Cartonbox 12
Dia. Code Packing

(mm) Type Pc
50 1300905030412 Cartonbox 20 Silence Clamp Metal - Horizontal

75 1300907530412 Cartonbox 15
Dia. Code Packing
125 1300912530412 Cartonbox 10
50 1300905030612 Cartonbox 50
160 1300916030412 Cartonbox 7
75 1300907530612 Cartonbox 30
200 1300920030412 Cartonbox 5
110 1300911030612 Cartonbox 25
125 1300912530612 Cartonbox 25
160 1300916030612 Cartonbox 25
200 1300920030612 Cartonbox 20

Silenta FR
Fire Resistant and
Silenta FR is a Fire Resistant Sound-Insulated soil and waste water pipe system in compliance with TS
EN13501, DIN4102 fire tests to building materials standards and acoustic performance of waste water
installations measured acc. to EN 14366 standard.
• Silenta FR Fire Resistant Sound-Insulated Piping System • High-quality gaskets are used
reached 12 dB(A) sound intensity level at the flow rate of 4 • Smooth inner and outer surface ensures ease of installation
l/s in the tests conducted by the German Fraunhofer Institute • No clogging because it does not create residues and lime
according to EN 14366 • Ensures fast and smooth flow in the system
• Its fire class value is B-s1, d0 according to TS EN 13501-1 • Resistant to corrosion
• Produced by mineral additive special formulation • 100% recyclable and environmentally friendly
• Made of PVC-U composite material in single layer. This composite
layer increases the strength and chemical and physical resistance
of pipes and fittings
•Schools, libraries, hospitals, hotels, houses
• All underground drainage systems between the building
and the main pipeline
B-s1, d0
Fire Classifaction
(acc. to EN 13501-1)
B : Hardly Combustible
12 dB(A)
s1 : No Smoke formation
30
Structure
1 It guarantees water tightness with its special
gasket structure providing ease of montage.
The geometrical properties of the gasket groove
ensure fast and easy installation.
2 Inner Surface
It ensures superior flow performance with its
smooth structure. Thanks to chemical durability,
it prevents corrosion that occurs in pipe.
Outer Surface
3 Resistant against impacts and fire. Prevents the
spread of fire thanks to its special composite
fire-retarding formulation.
Pipe Structure One Layered (Special PVC composite formulation with fire-retardent and sound absorbing additives)
Pipe Length [mm] 150, 250, 500, 1000, 2000, 3000
Sound Transmission 12 dB(A) at 4 l/s (EN 14366)
Fire class B1 (DIN 4102), B-s1, d0 (TS EN 13501)
Color Light Grey
Chemical Resistance Resistant to organic and inorganic chemical environments for pH values between 2 and 12
Installation Temperature Minimum: -10oC Maximum: 60oC
Operating Temperature Minimum: -10oC Maximum: 60oC
Impact Strength Compiles with EN 1451
Approvals and Certificates Germany: Fraunhofer, Turkey: TSE
Superior Sound-Proof And
Non-Flammable Performance
Silenta FR Fire Resistant and Sound-Insulated Pipes
guarantee quality, peace of mind and living comfort.
Acoustic performance of Silenta Premium was accredited by the

famous German Fraunhofer Institute, in compliance with DIN
4109 and EN 14366.
Noise measurement tests were carried out at Fraunhofer

Physical Constructions Institute in Stuttgart, the most accredited
European laboratory on noise studies on buildings. The acoustic
12
performance tests were conducted in compliance with the
standard DIN EN 14366. dB(A)
The emitted noise level at 4l/s flow rate, with special GF Hakan
Silent clamps, is only 12 dB(A) according to DIN EN 14366.
SILENTA FR
7 dB(A)
7 dB(A)
4 dB(A)
0,5 l/s
1 l/s
2 l/s
32
Silenta FR
Silenta FR Pipe with Socket Silenta FR Elbow 45°


75 250 4,5 1000007513211 Cartonbox 15
75 500 4,5 1000007513311 Cartonbox 19
75 1000 4,5 1000007513411 Bundle 10

75 2000 4,5 1000007513511 Length 1
75 3000 5,3 1000007513611 Length 1 Silenta FR Elbow 87,5°
110 150 5,3 1000011015111 Cartonbox 9
Dia. Code Packing
110 250 5,3 1000011015211 Cartonbox 6
(mm) Type Pc
110 500 5,3 1000011015311 Cartonbox 9
50 1300105000611 Cartonbox 60
110 1000 5,3 1000011015411 Bundle 4
75 1300107501111 Cartonbox 25
110 2000 5,3 1000011015511 Length 1
110 1300111001911 Cartonbox 8
110 3000 5,3 1000011015611 Length 1
125 1300112502111 Cartonbox 15
125 250 5,3 1000012517211 Cartonbox 11
160 1300116002911 Cartonbox 6
125 500 5,3 1000012517311 Cartonbox 6
200 1300120002811 Cartonbox 3
125 1000 5,3 1000012517411 Bundle 4
125 2000 5,3 1000012517511 Length 1
125 3000 5,3 1000012517611 Length 1
* 160 150 5,3 1000016018111 Cartonbox 12
* 160 250 5,3 1000016018211 Cartonbox 6

Silenta FR Branch 45°
* 160 500 5,3 1000016018311 Cartonbox 4
* 160 1000 5,3 1000016018411 Bundle 3 Dia. Code Packing

* 160 2000 5,3 1000016018511 Length 1 (mm) Type Pc
* 160 3000 5,3 1000016018611 Length 1 50-50 1300205004611 Cartonbox 20

125-50 1300212505411 Cartonbox 10
Products marked by “*” are produced as Clean Water Muff. 125-75 1300212505511 Cartonbox 10
125-110 1300212505211 Cartonbox 6
125-125 1300212505311 Cartonbox 6
160-110 1300216006011 Cartonbox 5
160-125 1300216006111 Cartonbox 2
160-160 1300216006211 Cartonbox 3
200-110 1300220006011 Cartonbox 3
Silenta FR Pipe without Socket
Dia. Leng. Thick. Code Packing

[mm] [mm] [mm] Type Pc Silenta FR Branch 87,5°
200 150 6,2 1000020020011 Length 1

Dia. Code Packing
200 250 6,2 1000020020111 Length 1 (mm) Type Pc
200 500 6,2 1000020020211 Length 1
50-50 1300205008611 Cartonbox 40
200 1000 6,2 1000020020311 Length 1
75-50 1300207508511 Cartonbox 40
200 2000 6,2 1000020020411 Length 1
75-75 1300207508611 Cartonbox 30
200 3000 6,2 1000020020511 Length 1
110-50 1300211009111 Cartonbox 18
250 500 6,2 1000025020211 Length 1
110-75 1300211009211 Cartonbox 18
250 1000 6,2 1000025020311 Length 1
110-110 1300211009311 Cartonbox 5
250 2000 6,2 1000025020411 Length 1
160-110 1300216009411 Cartonbox 5
250 3000 6,2 1000025020511 Length 1
160-160 1300216009111 Cartonbox 4
Silenta FR
Silenta FR Double Branch 45° Silenta FR Reducer

110-75 1300411018411 Cartonbox 25
125-110 1300412518611 Cartonbox 12
160-110 1300416018711 Cartonbox 8
160-125 1300416018811 Cartonbox 14
Dia. Code Packing

(mm) Type Pc
50
1300905030412 Cartonbox 20
75
1300907530412 Cartonbox 15
110
1300911030412 Cartonbox 10
125
1300912530412 Cartonbox 10
Silenta FR Socket with Central Register 160

1300916030412 Cartonbox 7
200
1300920030412 Cartonbox 5
Dia. Code Packing

(mm) Type Pc
125 1300512520411 Cartonbox 30

160 1300516020511 Cartonbox 12
Silenta Clamp Metal - Horizontal
Dia. Code Packing

(mm) Type Pc
50 1300905030612 Cartonbox 50
75 1300907530612 Cartonbox 30
110 1300911030612 Cartonbox 25
125 1300912530612 Cartonbox 25
160 1300916030612 Cartonbox 25
200 1300920030612 Cartonbox 20
Silenta FR Sliding Socket
Dia. Code Packing

(mm) Type Pc
75 1300507520311 Cartonbox 90
125 1300512520511 Cartonbox 30
160 1300516020611 Cartonbox 2
34
What is Sound Insulation
Performance?
Sound insulation performance is the sound insulation capability of the system against the vibrations that occur between the pipes used
in the waste water installation and the fluids transmitted through these pipes. With Silenta Premium, Silenta 3A and Silenta FR Piping
Systems, GF Hakan Plastik offers ultimate solutions against the sounds created in the installations.
Sources of sounds in the buildings can be listed

as follows: Why is Sound Protection Neces-
- Flushing
sary?
- Clogging of the flowing direction
Sound protection measures in a building aims to minimize the
- High water speeds
noise pollution in the rooms. Residents need to be protected
- Joints
against the noises emitted through air or caused by the building.
- Discharge
- Wrong planning
Unpleasant noises within the building as caused directly (created
- Faulty design
by the building) or indirectly (for example due to the construction
engineering systems) can be easily resolved with the use of Silenta
Due to critical drainage conditions, local vibrations occur
Product Range.
in the piping system passages. They could have adverse
impacts on sound characteristics.
To minimize and eliminate these impacts, Silenta Product

Ranges reduce noise in the sound-critical areas with elbows
having nominal widths of DN 58-DN 200, and ensures better
noise reduction in the affected areas.
8
Sound Performance dB(A)
0
0,5 1 2 4
Water Flow Velocity (l/s)
The above graphics indicate the results of the acoustic tests

conducted by Fraunhofer Building Physics Institute.
Silenta Premium 13 dB(A) at 4 l/s flow

Silenta 3A 16 dB(A) at 4 l/s flow
Silenta FR 12 dB(A) at 4 l/s flow
HT-PP
Soil and Waste Water Piping Systems
GF Hakan HT-PP Pipes and Fittings are made of polypropylene that guarantees lightweight, high resistance
to chemical agents, excellent resistance to abrasion. These perfect characteristics are suitable for the
construction of waste and drainage systems of buildings and other underground systems in accordance with
EN1451-1 and they have B2 flammability class resistance to fire with DIN 4102.
•• High Impact Resistance •• Easy Montage and Installation

Because of the flexible molecular structure of its raw material, it Special lip designed sealed bell-mouth system ensures tight and
has higher stroke and impact resistance than other rigid plastic enduring montage. It is light, easy portable and provides fast
pipelines under low temperature environments. montage.
It does not need any special tools.
•• High Temperature Resistance
It can be used confidently in installments which produce waste at •• Superior Chemical Resistance
high temperature in short time like washing machine, dishwasher GF Hakan HT-PP system has highest resistance to chemical agents
and alike. dissolved in waste waters. Accordingly, GF Hakan HT-PP waste
water pipeline and joints provide the most suitable installment
•• Smooth Inside Surface solution in chemical waste drainage. They have corrosion and
Having smooth inner surface, it provides smooth flow and prevents abrasion resistance.
deposits formation.
•• No Poisonous Gas Exhaust

When GF Hakan HT-PP pipelines caught fire, there will be no
gas exhaust other than carbon dioxide and steam. There is no
poisonous and lethal waste org as exhaust dangerous to human
health, due to products are Halogen-free. Products are %100
recyclable and environmentally friendly.
• All underground drainage systems betweenthe building and the main pipeline
36
Structure
1 Special Gasket System

The push-fit socket with lip seal
guarantees water tightness and allows
movement of the pipe due to thermal expansion.
The geometric characteristics of the socket
ensure installation speed and simplicity.
2 Inner Surface
3 Outer Surface
Resistant against impacts and high
temperatures.
Pipe Structure One Layered Solid Structure
Diameters [mm] d32, d40, d50, d75, d110, d125, d160, d200
Pipe Length [mm] 150, 250, 500, 1000, 2000, 3000
Clamping With GF Hakan Standard Pipe Clamps
Color Dark Grey and Orange
Impact Strength Complies with EN 1451
Approvals and Certificates Germany: Hoch, Sweden: Insta-Cert, Ukraine: Sepro, Russia: Gost-R, Turkey: TSE
HT-PP
HT-PP Pipe with Socket (S 20) HT-PP Pipe with Double Socket (S 20)
Dia. Leng. Thick. Code Packing Dia. Leng. Code Packing

[mm] [mm] [mm] Type Pc (mm) (mm) Type Pc
32 150 1,8 4801003200121 Cartonbox 1000 32 150 4801003201521 Cartonbox 100

32 1000 1,8 4801003200421 Bundle 10 32 1000 4801003201821 Bundle 150
32 1500 1,8 4801003200521 Bundle 10 32 1500 4801003201921 Bundle 20
32 2000 1,8 4801003200621 Bundle 10 32 2000 4801003202021 Bundle 20
32 3000 1,8 4801003200721 Bundle 10 32 3000 4801003202121 Bundle 20
40 150 1,8 4801004001021 Cartonbox 300 40 150 4801004019821 Cartonbox -
40 500 1,8 4801004001221 Cartonbox 140
40 500 4801004020021 Cartonbox 140
40 1000 1,8 4801004001321 Bundle 10 40 1000 4801004020121 Bundle 10
40 2000 1,8 4801004001521 Bundle 10
40 1500 4801004020221 Bundle 10
40 3000 1,8 4801004001621 Bundle 10
40 2000 4801004020321 Bundle 10
50 150 1,8 4801005002021 Cartonbox 200
40 3000 4801004020421 Bundle 10
50 250 1,8 4801005002121 Cartonbox 150
50 500 4801005020121 Cartonbox 60
50 500 1,8 4801005002221 Cartonbox 90
50 1000 4801005020421 Bundle 10
50 1000 1,8 4801005002321 Bundle 10
50 2000 4801005020221 Bundle 10
50 2000 1,8 4801005002521 Bundle 10
50 3000 4801005020321 Bundle 10
50 3000 1,8 4801005002621 Bundle 10
75 500 4801007520421 Cartonbox 35
50 6000 1,8 4801005002721 Bundle 10
75 150 1,9 4801007503021 Cartonbox 100
75 1000 4801007520321 Bundle 10
75 250 1,9 4801007503121 Cartonbox 70

75 2000 4801007520521 Bundle 10
75 500 1,9 4801007503221 Cartonbox 40 75 3000 4801007520621 Bundle 10
75 1000 1,9 4801007503321 Bundle 10 110 500 4801011020621 Cartonbox 15
75 2000 1,9 4801007503521 Bundle 10 110 1000 4801011020721 Bundle 4
75 3000 1,9 4801007503621 Bundle 10 110 2000 4801011020821 Bundle 4
75 6000 1,9 4801007503721 Bundle 10 110 3000 4801011020921 Bundle 4
110 1000 2,7 4801011004321 Bundle 4 125 3000 4801012521321 Bundle 4
110 2000 2,7 4801011004521 Bundle 4 160 1000 4801016021421 Bundle 4
110 3000 2,7 4801011004621 Bundle 4 160 3000 4801016021521 Bundle 4
110 6000 2,7 4801011004721 Length 1
125 150 3,1 4801012505021 Cartonbox 40
125 250 3,1 4801012505121 Cartonbox 20
125 500 3,1 4801012505221 Cartonbox 16
125 1000 3,1 4801012505321 Bundle 4

125 2000 3,1 4801012505421 Bundle 4
125 3000 3,1 4801012505521 Bundle 4
125 6000 3,1 4801012505621 Length 1
160 150 3,9 4801016006021 Cartonbox 24
160 250 3,9 4801016006121 Cartonbox 14
160 500 3,9 4801016006221 Cartonbox 8
160 1000 3,9 4801016006321 Bundle 4

160 2000 3,9 4801016006421 Bundle 4
160 3000 3,9 4801016006521 Bundle 4
160 6000 3,9 4801016006621 Bundle 4
38
HT-PP
HT-PP Elbow 15° HT-PP Elbow 87,5°


160 4901116006121 Cartonbox 15
HT-PP Elbow 30°

HT-PP Long Elbow 45°
Dia. Code Packing

(mm) Type Pc Dia. Code Packing
(mm) Type Pc
32 4901103200221 Cartonbox 1000
110 4901111036521 Cartonbox 8
40 4901104001121 Cartonbox 500
50 4901105002121 Cartonbox 300
75 4901107503121 Cartonbox 150
110 4901111004121 Cartonbox 60
160 4901116005621 Cartonbox 20
HT-PP Branch 87,5°
Dia. Code Packing

HT-PP Elbow 45° (mm) Type Pc
32-32 4901203241321 Cartonbox 500

Dia. Code Packing 40-40 4901204042821 Cartonbox 200
160-110 4901216010921 Cartonbox 14
160-160 4901216011121 Cartonbox 10
HT-PP Double Branch 45°

HT-PP Elbow 67,5°
Dia. Code Packing
(mm) Type Pc
50-50 4901205012021 Cartonbox 100

HT-PP
HT-PP Branch 45° HT-PP Socket with Central Register


75-75 4901207503121 Cartonbox 60
110-50 4901211004021 Cartonbox 40
110-75 4901211004121 Cartonbox 30
110-110 4901211004221 Cartonbox 20
125-75 4901212505121 Cartonbox 24
125-110 4901212505221 Cartonbox 15
125-125 4901212505321 Cartonbox 16 HT-PP Sliding Socket
160-110 4901216006021 Cartonbox 10
32 4901503241521 Cartonbox 600

40 4901504041621 Cartonbox 500
50 4901505031721 Cartonbox 400
75 4901507531821 Cartonbox 200
110 4901511040621 Cartonbox 80
160 4901516032021 Cartonbox 30
HT-PP Branch 67,5°
Dia. Code Packing

(mm) Type Pc
110-110 4901211041221 Cartonbox 10

HT-PP Reducer
Dia. Code Packing

(mm) Type Pc
40-32 4901404017021 Cartonbox 750

50-32 4901405016521 Cartonbox 500
HT-PP Repair Pipe (Long Socket) 50-40 4901405017021 Cartonbox 500
75-50 4901407517121 Cartonbox 200
Dia. Code Packing 110-50 4901411017221 Cartonbox 100
160-110 4901416017521 Cartonbox 40
160-125 4901416041021 Cartonbox 50
* HT-PP S Siphon 45°

HT-PP Double Branch 87°
Dia. Code Packing

(mm) Type Pc
75 4901507592421 Cartonbox 50
110-110-110 4901211014121 Cartonbox 20
110 4901611015021 Cartonbox 20

HT-PP
* HT-PP S Siphon 87,5°
Dia. Code Packing

(mm) Type Pc
75 4901507592521 Cartonbox 30
110 4901611015121 Cartonbox 15
HT-PP Corner Double Branch 87,5°
Dia. Code Packing

(mm) Type Pc
110-110 4901211015521 Cartonbox 20
HT-PP Clean Out (Circular)
Dia. Code Packing

(mm) Type Pc
75 4901307530921 Cartonbox 80
HT-PP Clean Out (Rectangular)
Dia. Code Packing

(mm) Type Pc
110 4901311031321 Cartonbox 30

160 4901916041821 Cartonbox 8
HT-PP Socket Plug
Dia. Code Packing

(mm) Type Pc
32 4901903241621 Cartonbox 1000

40 4901904041721 Cartonbox 1000
50 4901905040721 Cartonbox 1000
75 4901907540821 Cartonbox 250
110 4901911016021 Cartonbox 200
160 4901916016121 Cartonbox 60
HT-PP Villa Type Ratchet Check Valve
Dia. Code Packing

(mm) Type Pc
110 4901911042322 Cartonbox 10

125 4901912542422 Cartonbox 10

PVC-U
Soil and Waste Water Piping and Fitting Systems
PVC-U Piping and Fitting Systems are made in single layer out of specifically-formulated and strengthened
PVC-U material with high fire resistance, for non-pressurized soil and waste water piping systems in
compliance with EN 1329-1 System Standards.
•• Not flammable: •• Does not leak:

Its fire class value is B-s2, d0 according to TS EN 13501. GF HAKAN PLASTIK PVC-U Soil and Waste Water Pipe Systems
and Fittings are equipped with high quality seal rings.
•• Easy to install and handle:
Smooth and bright internal and external surfaces of GF Hakan •• Environmentally friendly and corrosion resistant:
Plastik PVC-U help installation. They don‘t get blocked by PVC-U allows the safe transportation of many acids, alkalis
minimizing the sediment and lime level. They also provide fast and chemical concentrates without fear of corrosion and
and proper flow. environmental pollution. %100 recyclable and environmentally
friendly.
•• Lightweight and cost effective:
PVC-U is lightweight and is extremely easy to install which can •• Long service life
save both time and money. Durable and maintenance-free.
• All underground drainage systems between the building and the main pipeline
Fire Classifaction
(acc. to EN 13501-1) B-s2, d0
B : Hardly Combustible
s2 : Minimum Smoke formation
B-s2, d0
42
Structure
1 The push-fit socket with lip seal
guarantees water tightness and allows
movement of the pipe due to thermal expansion.
The geometric characteristics of the socket
ensure installation speed and simplicity.
2 Inner Surface
Outer Surface
3 Resistant against impacts and fire. Prevents
the spread of fire, thanks to its special Flame
Retarding composite structure.
Special, one-layered PVC-U formulation that ensures increased

chemical and physical resistance with non-flammable properties of
pipes and fittings
Pipe Structure One Layered (Special PVC composite formulation with fire-retarding additives)
Pipe Length [mm] 150, 250, 500, 1000, 2000, 3000
Fire class B1 (DIN 4102), B-s2, d0 (EN 13501-1)
Clamping With GF Hakan Standard Clamps
Color Light Grey
Installation Temperature Minimum: -10oC Maximum: +60oC
Operating Temperature Minimum: -10oC Maximum: +60oC
Standart EN 1329-1
Approvals and Certificates Sweden: Insta- Cert, Ukraine: Sepro, Turkey: TSE
PVC Soil and Waste Water Pipes
PVC Waste Water Pipe Light Grey PVC Waste Water Pipe Orange
Dia. Leng. Thick. Color Code Packing Dia. Leng. Thick. SN Color Code Packing
(mm) (mm) (mm) Type Pc (mm) (mm) (mm) Type Pc
50 150 3,0 Light Grey 1000005000111 Bag 100 110 500 3,2 SN4 Orange 1008011004311 Bundle 10
50 1000 3,0 Light Grey 1000005000411 Bundle 10 110 3000 3,2 SN4 Orange 1008011004611 Bundle 4
50 2000 3,0 Light Grey 1000005000511 Bundle 10 110 6000 3,2 SN4 Orange 1008011004811 Length 1
75 500 3,0 Light Grey 1000007502311 Bag 20 110 6000 3,2 SN8 Orange 1008011015411 Length 1
75 6000 3,0 Light Grey 1000007502711 Length 1 125 3000 3,2 SN4 Orange 1008012510311 Bundle 3
110 250 3,2 Light Grey 1000011004211 Bag 20 125 500 3,7 SN8 Orange 1008012511011 Bag 8
110 6000 3,2 Light Grey 1000011004711 Length 1 160 500 4 SN4 Orange 1008016025011 Bundle 4
125 150 3,2 Light Grey 1000012506111 Bag 20 160 1000 4 SN4 Orange 1008016025111 Bundle 3
125 1000 3,2 Light Grey 1000012506411 Bundle 5 160 6000 4 SN4 Orange 1008016025411 Length 1
200 2000 4,9 Light Grey 1000020010511 Length 1 200 6000 5,9 SN8 Orange 1008020041011 Length 1
250 6000 7,3 SN8 Orange 1008025050311 Length 1
315 1000 7,7 SN4 Orange 1008031514011 Length 1
315 2000 7,7 SN4 Orange 1008031514111 Length 1
315 3000 7,7 SN4 Orange 1008031514211 Length 1
315 6000 7,7 SN4 Orange 1008031520611 Length 1
315 1000 9,2 SN8 Orange 1008031520011 Length 1
315 2000 9,2 SN8 Orange 1008031520111 Length 1
315 3000 9,2 SN8 Orange 1008031520211 Length 1
315 6000 9,2 SN8 Orange 1008031520311 Length 1
44
PVC Soil and Waste Water Fittings
PVC Elbow 15° PVC Branch 45°
Dia. Color Code Packing Dia. Color Code Packing

110 Light Grey 1300111001111 Bag 35 50-50 Light Grey 1300205004511 Bag 75
110 Orange 1308116002311 Bag 35 75-50 Light Grey 1300207504311 Bag 50
75-75 Light Grey 1300207504411 Bag 30
110-50 Light Grey 1300211004611 Bag 20
110-75 Light Grey 1300211004711 Bag 15
110-110 Light Grey 1300211004811 Bag 10
PVC Elbow 30°
125-50 Light Grey 1300212504611 Bag 15
125-75 Light Grey 1300212504711 Bag 10
Dia. Color Code Packing 125-110 Light Grey 1300212505011 Bag 10
(mm) Type Pc
125-125 Light Grey 1300212505111 Bag 10
110 Light Grey 1300111001211 Bag 35
160-50 Light Grey 1300216005012 Bag 10
110 Orange 1308116002411 Bag 35
160-75 Light Grey 1300216005112 Bag 10
160-110 Light Grey 1300216005211 Bag 6
160-125 Light Grey 1300216005311 Bag 5
160-160 Light Grey 1300216005411 Bag 4
PVC Elbow 45° 200-110 Light Grey 1300220005511 Bag 4
200-125 Light Grey 1300220005612 Bag 5
200-160 Light Grey 1300220005712 Bag 4
Dia. Color Code Packing
(mm) Type Pc 200-200 Light Grey 1300220005812 Bag 4
200 Light Grey 1300120002511 Bag 5 50-50 Orange 1308205004011 Bag 75
250 Light Grey 1300125002511 Bag 3 75-50 Orange 1308207504111 Bag 50
50 Orange 1308105000111 Bag 150 75-75 Orange 1308207504211 Bag 30
125-110 Orange 1308212504911 Bag 10
160-50 Orange 1308215005012 Bag 10
160-75 Orange 1308215005112 Bag 5
160-110 Orange 1308216005211 Bag 6
160-125 Orange 1308216005311 Bag 5
160-160 Orange 1308216005411 Bag 4
200-110 Orange 1308220005512 Bag 5
200-125 Orange 1308220005612 Bag 5
200-160 Orange 1308220005712 Bag 4
200-200 Orange 1308220005812 Bag 4
250-110 Orange 1308225005912 Bag 5
250-125 Orange 1308225006012 Bag 3
250-160 Orange 1308225006112 Bag 3
250-200 Orange 1308225006212 Bag 3
250-250 Orange 1308225006312 Bag 3
PVC Branch 87,5° PVC Elbow 67,5°

50-50 Light Grey 1300205008511 Bag 75 110 Light Grey 1300111001511 Bag 30
75-50 Light Grey 1300207508311 Bag 50 110 Orange 1308111001511 Bag 30
75-75 Light Grey 1300207508411 Bag 40
110-50 Light Grey 1300211008611 Bag 20
110-75 Light Grey 1300211008811 Bag 20
110-110 Light Grey 1300211008711 Bag 15
125-50 Light Grey 1300212508612 Bag 15
125-75 Light Grey 1300212508712 Bag 10
125-110 Light Grey 1300212508812 Bag 10
125-125 Light Grey 1300212508912 Bag 10
160-50 Light Grey 1300216009012 Bag 10
160-75 Light Grey 1300216009112 Bag 8 PVC Elbow 87,5°
160-110 Light Grey 1300216009311 Bag 5
160-125 Light Grey 1300216009312 Bag 5 Dia. Color Code Packing
160-160 Light Grey 1300216009011 Bag 6 (mm) Type Pc
75-50 Orange 1308207508111 Bag 50 110 Orange 1308111001411 Bag 25
125-50 Orange 1308212508612 Bag 15

125-75 Orange 1308212508712 Bag 10
125-110 Orange 1308212508812 Bag 10
125-125 Orange 1308212508912 Bag 10
160-110 Orange 1308216009212 Bag 5
160-125 Orange 1308216009312 Bag 5
160-160 Orange 1308216009411 Bag 6
160-50 Orange 1308215009012 Bag 10
160-75 Orange 1308215009112 Bag 10
200-110 Orange 1308220009512 Bag 5
200-125 Orange 1308220009612 Bag 5
200-160 Orange 1308220009712 Bag 5
200-200 Orange 1308220009812 Bag 4
250-110 Orange 1308225009912 Bag 5
250-125 Orange 1308225010012 Bag 5
250-160 Orange 1308225010112 Bag 3
250-200 Orange 1308225010212 Bag 3
250-250 Orange 1308225010312 Bag 3
46
PVC Double Branch 45° PVC Double Branch 87,5°
Dia. Color Code Packing Dia. Code Packing

50-50-50 Light Grey 1300205012012 Bag 20 50-50-50 1300205016012 Bag 50
110-50-50 Light Grey 1300211012811 Bag 12
110-75-75 Light Grey 1300211012412 Bag 10
110-110-110 Light Grey 1300211012611 Bag 10
125-50-50 Light Grey 1300212512612 Bag 6
125-75-75 Light Grey 1300212512712 Bag 5
125-110-110 Light Grey 1300212512812 Bag 5
125-125-125 Light Grey 1300212512912 Bag 5
160-50-50 Light Grey 1300216013012 Bag 5
160-75-75 Light Grey 1300216013112 Bag 4
160-110-110 Light Grey 1300216013212 Bag 5
160-125-125 Light Grey 1300216013312 Bag 5
160-160-160 Light Grey 1300216013412 Bag 4
200-110-110 Light Grey 1300220013512 Bag 4
200-125-125 Light Grey 1300220013612 Bag 1
200-160-160 Light Grey 1300220013712 Bag 3
200-200-200 Light Grey 1300220013812 Bag 1
250-125-125 Light Grey 1300225014012 Bag 3
250-160-160 Light Grey 1300225014112 Bag 1
250-200-200 Light Grey 1300225014212 Bag 1
250-250-250 Light Grey 1300225014312 Bag 1
50-50-50 Orange 1308205012012 Bag 50
75-50-50 Orange 1308207512112 Bag 30
75-75-75 Orange 1308207512212 Bag 20
110-75-75 Orange 1308211012412 Bag 10
125-50-50 Orange 1308211012511 Bag 10
125-50-50 Orange 1308212512612 Bag 12
125-75-75 Orange 1308212512712 Bag 10
125-110-110 Orange 1308212512812 Bag 10
125-125-125 Orange 1308212512912 Bag 10
160-75-75 Orange 1308215013112 Bag 5
160-50-50 Orange 1308216013012 Bag 5
160-110-110 Orange 1308216013212 Bag 5
160-125-125 Orange 1308216013312 Bag 5
160-160-160 Orange 1308216013412 Bag 4
200-110-110 Orange 1308220013512 Bag 5
200-125-125 Orange 1308220013612 Bag 5
200-200-200 Orange 1308220015112 Bag 4
250-110-110 Orange 1308225013912 Bag 3
250-125-125 Orange 1308225014012 Bag 3
250-160-160 Orange 1308225014112 Bag 3
250-200-200 Orange 1308225014212 Bag 3
250-250-250 Orange 1308225014312 Bag 3
PVC Pipe Socket Plug PVC Sliding Socket

50 Light Grey 1300905025011 Bag 500 50 Light Grey 1300505020111 Bag 200
125 Light Grey 1300912522412 Cartonbox 20 125 Light Grey 1300512520211 Bag 30
50 Orange 1308905022011 Bag 500 50 Orange 1308505020011 Bag 200
160 Orange 1308916022412 Cartonbox 70 160 Orange 1308516020411 Bag 15
200 Orange 1308920022512 Cartonbox 25 200 Orange 1308520020512 Bag 6
PVC Reducer

(mm) Type Pc
75-50 Light Grey 1300407518111 Bag 100 * PVC S Siphon 45°
110-50 Light Grey 1300411018011 Bag 50
110-75 Light Grey 1300411018311 Bag 50
125-75 Light Grey 1300412518312 Bag 20 (mm) Type Pc
160-125 Light Grey 1300416018911 Bag 20
200-110 Light Grey 1300420018712 Bag 5
200-125 Light Grey 1300420018812 Bag 15
200-160 Light Grey 1300420018912 Bag 15
250-110 Light Grey 1300425019012 Bag 5
250-125 Light Grey 1300425019112 Bag 5
250-160 Light Grey 1300425019212 Bag 5
250-200 Light Grey 1300425019312 Bag 5
75-50 Orange 1308407518011 Bag 100
* PVC S Siphon 87,5°
110-50 Orange 1308411018111 Bag 50
110-75 Orange 1308411018211 Bag 50 Dia. Color Code Packing
(mm) Type Pc
125-110 Orange 1308412518312 Bag 40
75 Light Grey 1300607521211 Bag 30
125-110 Orange 1308412518411 Bag 25
110 Light Grey 1300611021411 Bag 10
200-110 Orange 1308416018511 Bag 20
75 Orange 1308607521311 Bag 30
200-110 Orange 1308420018712 Bag 15
110 Orange 1308611021411 Bag 10
200-125 Orange 1308420018812 Bag 15
200-160 Orange 1308420018912 Bag 15
250-110 Orange 1308425019012 Bag 5
250-125 Orange 1308425019112 Bag 5
250-160 Orange 1308425019212 Bag 5
250-200 Orange 1308425019312 Bag 5
PVC Horizontal Check Valve
Dia. Code Packing

(mm) Type Pc
50 1300905023312 Cartonbox 20
75 1300907523412 Cartonbox 16

PVC Ratchet Check Valve PVC Spare Gasket

160 1300916023712 Cartonbox 8 110 1410911000392 Bag 1000

200 1300920023812 Cartonbox 1 125 1410912500492 Bag 500
160 1410916000592 Bag 300
200 1410920000692 Bag 250
250 1410925000792 Cartonbox 150
PVC Clamp
PVC Repair Pipe (Type 1) (Long Socket)
Dia. Code Packing
(mm) Type Pc
Dia. Code Packing
75 1300907524112 Cartonbox 300
110 1000011030111 Bag 20
110 1300911024212 Cartonbox 150
125 1300912524312 Cartonbox 100
160 1300916024412 Cartonbox 60
200 1300920024512 Cartonbox 35
PVC Clean Out
Dia. Code Packing

(mm) Type Pc
PVC Kada
50 1300305017012 Bag 50
Dia. Code Packing 75 1300307517012 Bag 15

(mm) Type Pc 110 1300311017111 Bag 15
125 1300312517211 Bag 10
110 1300911030222 Cartonbox 36
160 1300316017311 Bag 6
200 1300320017412 Bag 4
250 1300325017512 Bag 3
Standard Rubber Lined Metal Clamp with Nut

PVC Vertical Check Valve
Dia. Code Packing

(mm) Type Pc
50 4701905002022 Cartonbox 100
50 1300905023512 Cartonbox 20
75 4501905820082 Cartonbox 100
75 1300907523612 Cartonbox 16
110 4501757526682 Cartonbox 40
125 4501907820182 Cartonbox 60
160 4501911020282 Cartonbox 50
200 1300912530212 Cartonbox 25
250 4501913520382 Cartonbox 25
160 4501916020482 Cartonbox 25
200 4501920020582 Cartonbox 25
250 4501925020582 Cartonbox 10

PVC Roof Vent Cap
Dia. Code Packing

(mm) Type Pc
75 1300907530082 Cartonbox 30
110 1300911030182 Cartonbox 18

Rain Gutters
and Fittings
Rain Gutters and Fittings are made of PVC-U raw material to demonstrate resistance against various weather
conditions.
• Rain Gutters and Fittings are produced in accordance Fields of Application

with TS EN 607 standard
• No corrosion and no stripping • Used for the discharge of rainwater into drains without
• Easy and fast to carry and install as it is lightweight damaging the facade of the building.
• No leaking due to the sealed connection
• Carries rainways even on low inclines
• Smooth and glossy surface
• High resistance to acids, fire, alcohol and gasoline and
no physical deterioration
Structure One Layered
Diameters [mm] 150 mm rectangular
Gutter Length [mm] 150, 250, 500, 1000, 2000, 3000, 4000
Jointing method Sealed
Clamping With GF Hakan Rain gutter clamps
Color Light Grey and Brown
Installation Very easy installation as it is lightweight
Installation Temperature Minimum: -10oC Maximum: +60oC
Operating Temperature Minimum: -10oC Maximum: +60oC
Approvals and Certificates Turkey: TSE
50
Rain Gutters
Rectangular Rain Gutter (d150)
Dia. Code Packing

(mm) Type Pc
Super Edged 2000016002011 Bundle 5

Eco Stream 2000016002111 Bundle 5
Rectangular Cuff Downspout
Dia. Code Packing

Rectangular Downspout Pipe (d150) (mm) Type Pc
150 2100900003411 Bag 15

Length Code Packing
(mm) Type Pc
500 2000009700511 Bag 10

1000 2000009700111 Bundle 4
2000 2000009700211 Bundle 4
3000 2000009700311 Bundle 4
Rectangular Cuff Round Downspout
4000 2000009700411 Bundle 4
Dia. Code Packing

(mm) Type Pc
150x75 2100916003211 Bag 15

150x110 2100916003311 Bag 15
Cornered Elbow
Dia. Code Packing

(mm) Type Pc
Rectangular Downspout Support
150 2100100000211 Bag 20
Dia. Code Packing

(mm) Type Pc
150 2100100000111 Bag 50
Rectangular Socket
Dia. Code Packing

(mm) Type Pc Rectangular Downspout Single Branch 45°
150 2100500003011 Bag 50
Dia. Code Packing
(mm) Type Pc
150x75 2100200002012 Bag 40
Rectangular Plug Rectangular Downspout Double Branch 45°

150 2100900004111 Bag 100 150x75 2100200002112 Bag 35

Rain Gutters
Profile Pipe Passage Part -Without Socket Rectangular Rain Gutter -Brown
Dia. Code Packing Type Code Packing

(mm) Type Pc Type Pc
75 1300907525212 Bag 50 Super Edged 2009016002011 Bundle 5

110 1300911025312 Bag 40 Eco Stream 2009016002111 Bundle 5
Rectangular Downspout Pipe (d150)

Profile Pipe Passage Part -With Socket
Length Code Packing
(mm) Type Pc
Dia. Code Packing
(mm) Type Pc 500 2009009700511 Bag 10
75 1300907525412 Bag 25 1000 2009009700111 Bundle 4
110 1300911025512 Bag 20 2000 2009009700211 Bundle 4
3000 2009009700311 Bundle 4
4000 2009009700411 Bundle 4
Profile Socket
Rectangular Inner- Outer Elbow

Dia. Code Packing
(mm) Type Pc
Dia. Code Packing
75 1300911007512 Bag 50 (mm) Type Pc
150 2109100000211 Bag 20
Rectangular Stream Clamp
Dia. Code Packing Rectangular Socket

(mm) Type Pc
150 2100916004711 Bag 75 Dia. Code Packing

(mm) Type Pc
150 2109500003011 Bag 50
Rectangular Downspout Pipe Clamp Rectangular Plug

150 2100907504512 Parcel 200 150 210990000411 Bag 100
52
Rain Gutters
Down Socket (Cornered) Elbow 45°

150 2109900003511 Bag 15 75 1309107500611 Bag 75
Elbow 87°
Dia. Code Packing

(mm) Type Pc
75 1309107500711 Bag 75
Down Socket (Round)
Dia. Code Packing

(mm) Type Pc
150x75 2109916003311 Bag 15

150x110 2109916003411 Bag 15
Rectangular Stream Clamp
Dia. Code Packing

(mm) Type Pc
150 2109916004711 Bag 50
Rectangular Downspout Elbow
Dia. Code Packing

(mm) Type Pc
Rectangular Downspout Pipe Clamp
150 2109100000111 Bag 50
Dia. Code Packing

(mm) Type Pc
75x100 2109907504512 Cartonbox 100
PVC Brown Pipe - Type 1
Dia. Leng. Code Packing

[mm] [mm] Type Pc
Rectangular Downspout Single Branch 45°
1009007550511 Bundle 5
75 1000
Dia. Code Packing 1009007550611 Bundle 5

75 2000
(mm) Type Pc 1009007550711 Bundle 5
75 3000
1009007550811 Bundle 1
75 6000
150 2109200002012 Bag 40
GF Aquasystem PP-R and PP-RCT
Piping Systems
Aquasystem PP-R Piping Systems is a lightweight piping system made of PP-R copolymer material, with high
mechanical strength and resistance to corrosion.
• Provides high resistance to extreme temperatures and • GF Aquasystem PP-R Piping Systems are produced in 6
pressure. PP-R pipes and fittings are produced in accordance different types depending upon the areas of use and customer
with TS EN 15874-1, TS EN 15874-2, TS EN 15874-3, DIN 8077, expectations:
DIN 8078, TS 13715, DIN 18836 standards. - PP-R Standard Piping Systems (PN10-PN16-PN20)
• Pipes and fittings available in the diameter range of d20-d200. - PP-R Glass Fiber Reinforced Piping Systems (PN20-PN25)
• High chemical resistance, no corrosion. - PP-R Glass Fiber Reinforced Climafaser Piping Systems (PN10)
• Fast, easy and practical installation by using socket, butt and - PP-R Stable External Aluminum Foil Piping Systems (PN25)
and electrofusion welding. - PP-R Aluplus Stable Middle Foil Piping Systems (PN20)
• White, grey and green options available. - PP-R UV-Resistant Piping Systems (PN20-PN25)
• Hygienic and environmentally-friendly.
PP-RCT is a new generation raw material which is developed for polypropylene by using a special
β-nucleation process.
Thanks to this enchancement, GF Aquasystem withstand higher
operating pressures at extreme temperatures, higher flow rates
and resistance to chlorine.
- PP-RCT Glass-Fiber Reinforced Piping Systems :
• SDR9 - PN22
• SDR7,4 - PN25
• Central heating systems
• Hot and cold water systems
• Drinking water and treated water supply systems
• Industrial Piping Systems (Transfer and discharge of
chemicals)
• Air conditioner systems
• Solar Collectors
54
Standard PP-R Pipes Glass Fiber Reinforced Composite PP-R Pipe
External Layer PP-R

PP-R
Middle Layer Glass Fiber Rein-
forced PP-R
Inner Layer PP-R
External Aluminum Foil Composite PP-R Pipe Middle Aluminum Foil Composite PP-R Pipe
External Layer PP-R

Middle Layer External Layer PP-R
Aluminum Foil
Inner Layer PP-R Middle Layer

Aluminum Foil
Inner Layer PP-R
Pipe Structure One Layer-Standard Pipes
Multi-Layer: Glass Fiber Reinforced Composite Pipes/Aluminum Foil Composite Pipes
Diameters [mm] d20, d25, d32, d40, d50, d63, d75, d90, d110, d125, d160, d200
Pressure Classes: Standard PPR Pipes PN10 (SDR11), PN16 (SDR7.4), PN20 (SDR6)
Glass Fiber Reinforced Composite Pipes: PN10 (SDR11), PN20 (SDR7.4), PN25 (SDR6)
External Aluminum Foil Composite Pipes: PN25 (SDR6)
Middle Aluminum Foil Composite Pipes: PN20 (SDR6)
PP-RCT Glass Fiber Reinforced Pipes (SDR9: PN22 – SDR7,4: PN25)
Pipe Length [mm] 4000 mm
Jointing Methods Socket Fusion Welding, Butt-Welding, Electrofusion Welding, Mechanical Connection,
Flange Connection
Color White, Green, Grey (For grey colour codes, please contact to GF Hakan Sales Department)
Installation Temperature Minimum: +5oC Maximum: +40oC
Operating Temperature Standard PPR Pipes: +5oC - +70oC
Glass Fiber Reinforced Composite Pipes: +5oC - +95oC
Aluminum Foil Composite Pipes: +5oC - +95oC
Application Class B (Building)
Standards EN15874-1/2/3, DIN 8077-78
Thermal Expansion Coefficient Standard Pipes: 0.15 mm/moK
Glass Fiber Reinforced Composite Pipes: 0.035 mm/moK
Aluminum Foil Composite Pipes: 0.030 mm/moK
Thermal Conductivity Coefficient 0.24 W/moK
Approvals and Certificates Spain: AENOR, UK: WRAS, LLYOD’s, Germany: DVGW, SKZ, HYGIENE,
Turkey: TSE, Ukraine: HYGIENE, SEPRO, Russia: GOST, HYGIENE, Bulgaria: BULGARKONTROLA
PP-R Aquasystem
PP-R Standard Pipe - PN10 (SDR11) PP-R Glass Fiber Reinforced Climafaser Pipe - PN10
(SDR 11)
Dia. Thic. Code - White Code - Green Packing
(mm) (mm) Type Pc Dia. Thic. Code - Green Packing
20 1,9 4000002002021 4002002002021 Bundle 100 (mm) (mm) Type Pc
25 2,3 4000002502121 4002002502121 Bundle 80 20 * 2,8 4202002030021 Bundle 100
32 2,9 4000003202221 4002003202221 Bundle 60 25 * 3,5 4202002530021 Bundle 80
40 3,7 4000004002321 4002004002321 Bundle 40 32 2,9 4202003230121 Bundle 60
50 4,6 4000005002421 4002005002421 Bundle 20 40 3,7 4202004030021 Bundle 40
63 5,8 4000006302521 4002006302521 Bundle 16 50 4,6 4202005030021 Bundle 20
75 6,8 4000007502621 4002007502621 Bundle 12 63 5,8 4202006330121 Bundle 16
90 8,2 4000009002721 4002009002721 Bundle 8 75 6,8 4202007530021 Bundle 12
110 10,0 4000011002821 4002011002821 Bundle 4 90 8,2 4202009030021 Bundle 8
125 11,4 4000012502921 4002012502921 Bundle 4 110 10,0 4202011030021 Bundle 4
160 14,6 4000016000821 4002016000821 Bundle 4 125 11,4 4202012530021 Bundle 4
200 18,2 4000020000121 4002020000121 Bundle 4 *For d20 and d25 diameter products, SDR7.4 (PN20)
Glass Fiber Reinforced Composite Pipes are suggested.
Note: Our climafaser pipes are green.
PP-R Standard Pipe - PN16 (SDR7,4) PP-R Glass Fiber Reinforced Pipe - PN20 (SDR7,4)
Dia. Thic. Code - White Code - Green Packing Dia. Thic. Code - White Code - Green Packing
(mm) (mm) Type Pc (mm) (mm) Type Pc
20 2,8 4000002004021 4000002004021 Bundle 100 20 2,8 4200002000121 4202002000121 Bundle 100
25 3,5 4000002504121 4000002504121 Bundle 80 25 3,5 4200002500221 4202002500221 Bundle 80
32 4,4 4000003204221 4000003204221 Bundle 60 32 4,4 4200003200321 4202003200321 Bundle 60
40 5,5 4000004004321 4000004004321 Bundle 40 40 5,5 4200004000421 4202004000421 Bundle 40
50 6,9 4000005004421 4000005004421 Bundle 20 50 6,9 4200005000521 4202005000521 Bundle 20
63 8,6 4000006304521 4000006304521 Bundle 16 63 8,6 4200006300621 4202006300621 Bundle 16
75 10,3 4000007504621 4000007504621 Bundle 12 75 10,3 4200007500721 4202007500721 Bundle 12
90 12,3 4000009004721 4000009004721 Bundle 8 90 12,3 4200009000821 4202009000821 Bundle 8
110 15,1 4000011004821 4000011004821 Bundle 4 110 15,1 4200011000921 4202011000921 Bundle 4
125 17,1 4000012504821 4000012504821 Bundle 4 125 17,1 4200012500121 4202012500121 Bundle 4
160 21,9 4000016000921 4000016000921 Bundle 4 160 21,7 4200016000121 4202016000121 Bundle 4
200 27,4 4000020001121 4000020001121 Bundle 4
PP-R Standard Pipe - PN20 (SDR6) PP-R Glass Fiber Reinforced Pipe - PN25 (SDR6)
(mm) (mm) Type Pc Dia. Thic. Code - White Code - Green Packing
25 4,2 4000002500221 4002002500221 Bundle 80 20 3,4 4200002002021 4202002002021 Bundle 100

32 5,4 4000003200321 4002003200321 Bundle 60 25 4,2 4200002502121 4202002502121 Bundle 80
40 6,7 4000004000421 4002004000421 Bundle 40 32 5,4 4200003202221 4202003202221 Bundle 60
50 8,3 4000005000521 4002005000521 Bundle 20 40 6,7 4200004002321 4202004002321 Bundle 40
63 10,5 4000006300621 4002006300621 Bundle 16 50 8,3 4200005002421 4202005002421 Bundle 20
75 12,5 4000007500721 4002007500721 Bundle 12 63 10,5 4200006302521 4202006302521 Bundle 16
90 15,0 4000009000821 4002009000821 Bundle 8 75 12,5 4200007506521 4202007506521 Bundle 12
110 18,3 4000011000921 4002011000921 Bundle 4 90 15,0 4200009006621 4202009006621 Bundle 8
125 20,8 4000012501021 4002012501021 Bundle 4 110 18,3 4200011006421 4202011006421 Bundle 4
160 26,6 4000016001021 4002016001021 Bundle 4 125 20,8 4200012500221 4202012500221 Bundle 4
200 33,2 4000020000221 4002020000221 Bundle 4 160 26,6 4200016000221 4202016000221 Bundle 4
56
PP-R Aquasystem
PP-R Middle Aluminum Foiled Pipe- PN20 (SDR6) PP-R UV Resistant Standard Pipe - PN20 (SDR6)
Dia. Thic. Code - White Code - Green Packing Dia. Thic. Code - White Code - Green Packing
20 3,4 4100002010021 4102002010021 Bundle 100 20 3,4 4000002010021 4002002010021 Bundle 100
25 4,2 4100002510021 4102002510021 Bundle 80 25 4,2 4000002510021 4002002510021 Bundle 80
32 5,4 4100003210021 4102003210021 Bundle 40 32 5,4 4000003210021 4002003210021 Bundle 60
40 6,7 4100004010021 4102004010021 Bundle 40 40 6,7 4000004010021 4002004010021 Bundle 40
50 8,3 4100005010021 4102005010021 Bundle 20 50 8,3 4000005010021 4002005010021 Bundle 20
63 10,5 4100006310021 4102006310021 Bundle 16 63 10,5 4000006310021 4002006310021 Bundle 16
PP-R External Aluminum Foiled Pipe - PN25 (SDR6) PP-R UV Resistant External Aluminum Foiled
Pipe - PN25 (SDR6)
(mm) (mm) Type Pc Dia. Thic. Code - White Code - Green Packing
25 5,3 4100002510021 4102002510021 Bundle 80 20 4,5 4100002000121 4102002000121 Bundle 100

32 6,5 4100003210021 4102003210021 Bundle 40 25 5,3 4100002500221 4102002500221 Bundle 80
40 7,8 4100004010021 4102004010021 Bundle 40 32 6,5 4100003200321 4102003200321 Bundle 40
50 9,4 4100005010021 4102005010021 Bundle 20 40 7,8 4100004000421 4102004000421 Bundle 40
63 11,6 4100006310021 4102006310021 Bundle 16 50 9,4 4100005000521 4102005000521 Bundle 20
75 13,6 4100007500721 4102007500721 Bundle 12 63 11,6 4100006300621 4102006300621 Bundle 16
90 16,1 4100009000821 4102009000821 Bundle 8
110 19,4 4100011000921 4102011007421 Bundle 4
Aquasystem® PP-RCT Faser Fiberglass Aquasystem® PP-RCT Faser Fiberglass

Reinforced Pipe SDR7.4 - PN25 Reinforced Pipe SDR9 - PN22
Dia. Thic. Code - Green Packing Dia. Thic. Code - Green Packing
20 2.8 4202002050021 Bundle 100 20 2.3 4202002050121 Bundle 100
25 3.5 4202002550021 Bundle 80 25 2.8 4202002550121 Bundle 80
32 4.4 4202003250021 Bundle 60 32 3.6 4202003250121 Bundle 60
40 5.5 4202004050021 Bundle 40 40 4.5 4202004050121 Bundle 40
50 6.9 4202005050021 Bundle 20 50 5.6 4202005050121 Bundle 20
63 8.6 4202006350021 Bundle 16 63 7.1 4202006350121 Bundle 16
75 10.3 4202007550021 Bundle 12 75 8.4 4202007550121 Bundle 12
90 12.3 4202009050021 Bundle 8 90 10.1 4202009050121 Bundle 8
110 15.1 4202011050021 Bundle 4 110 12.3 4202011050121 Bundle 4
125 17.1 4202012550021 Bundle 4 125 14.0 4202012550121 Bundle 4
160 21.7 4202016050021 Bundle 4 160 17.9 4202016050121 Bundle 4
PP-R Aquasystem
PP-R Elbow 90° PP-R Socket
Dia. Code - White Code - Green Packing Dia. Code - White Code - Green Packing
20 4300102000721 4302102000721 Cartonbox 400 20 4300502020021 4302502020021 Cartonbox 500
For butt fusion type, please contact with Product Manager
PP-R Elbow 45°
Dia. Code - White Code - Green Packing

(mm) Type Pc
20 4300102000121 4302102000121 Cartonbox 400
15 4300102500221 4302102500221 Cartonbox 250
32 4300103200321 4302103200321 Cartonbox 125
40 4300104000421 4302104000421 Cartonbox 75
50 4300105000521 4302105000521 Cartonbox 40
63 4300106300621 4302106300621 Cartonbox 20
Reducer PP-R
75 4300107501221 4302107501221 Cartonbox 4
90 4300109001322 4302109001322 Cartonbox 3 Dia. Code - White Code - Green Packing
110 4300111001422 4302111001422 Cartonbox 3 (mm) Type Pc
125 4300112501522 4302112501522 Cartonbox 2 25-20 4300402510021 4302402510021 Cartonbox 500
For butt fusion type, please contact with Product Manager 32-25 4300403210221 4302403210221 Cartonbox 150
40-20 4300404010321 4302404010321 Cartonbox 100
40-25 4300404010421 4302404010421 Cartonbox 100
40-32 4300404010521 4302404010521 Cartonbox 75
50-20 4300405010621 4302405010621 Cartonbox 75
50-25 4300405010721 4302405010721 Cartonbox 50
50-32 4300405010821 4302405010821 Cartonbox 75
PP-R Male to Female Elbow 90° 50-40 4300405010921 4302405010921 Cartonbox 40
63-25 4300406311021 4302406311021 Cartonbox 30
(mm) Type Pc 63-32 4300406311121 4302406311121 Cartonbox 30
75-50 4300407511421 4302407511421 Cartonbox 16
75-63 4300407511521 4302407511521 Cartonbox 16
90-50 4300409011521 4302409011521 Cartonbox 10
90-63 4300409011621 4302409011621 Cartonbox 20
90-75 4300409011721 4302409011721 Cartonbox 4
110-63 4300411011721 4302411011721 Cartonbox 16
110-75 4300411011821 4302411011821 Cartonbox 8
PP-R Reducing Elbow
110-90 4300411011921 4302411011921 Cartonbox 16
Dia. Code - White Code - Green Packing 125-75 4300412512022 4302412512022 Cartonbox 5
(mm) Type Pc 125-90 4300412512122 4302412512122 Cartonbox 7
20-25 4300402011021 4302402011021 Cartonbox 100 125-110 4300412512222 4302412512222 Cartonbox 5
25-32 4300402511121 4302402511121 Cartonbox 75 160-110 4300416011921 4302416011921 Cartonbox 1
58
PP-R Aquasystem
PP-R Tee PP-R End Cap

Dia. Code Packing
Dia. Code - White Code - Green Packing [mm] Type Pc
(mm) Type Pc
20 4300902008021 4302902008021 Cartonbox 250 4300902006021
20 Cartonbox 500
4300902506121
25 Cartonbox 300
25 4300902508121 4302902508121 Cartonbox 150
4300903206221
32 Cartonbox 100
32 4300903208221 4302903208221 Cartonbox 100
4300904006321
40 Cartonbox 75
40 4300904008321 4302904008321 Cartonbox 20
4300905006421
50 Cartonbox 40
50 4300905008421 4302905008421 Cartonbox 30
4300906306521
63 Cartonbox 20
63 4300906308521 4302906308521 Cartonbox 8
4300907506621
75 Cartonbox 25
75 4300907508621 4302907508621 Cartonbox 4
4300909006821
90 Cartonbox 18
90 4300909008721 4302909008721 Cartonbox 2
4300911006721
110 Cartonbox 3
110 4300911008821 4302911008821 Cartonbox 3
125 4300912508922 4302912508922 Cartonbox 2
160 4300916009021 4302916009021 Cartonbox 1
For butt fusion type, please contact with Product Manager
PP-R Blind Cap

(mm) Type Pc
20 4300902014021 4302902014021 Cartonbox 700
25 4300902514121 4302902514121 Cartonbox 300
PP-R Reducing Tee PP-R Crossover w Socket Short
Dia. Code - White Code - Green Packing Dia. Code - White Code - Green Packing
25-20-20 4300902520021 4302902520021 Cartonbox 100 20 4300902000321 4302902000321 Cartonbox 100

32-20-20 4300903220221 4302903220221 Cartonbox 50
32-20-25 4300903220321 4302903220321 Cartonbox 50
32-20-32 4300903220421 4302903220421 Cartonbox 100
32-25-20 4300903220521 4302903220521 Cartonbox 50
32-25-32 4300903220621 4302903220621 Cartonbox 100
40-20-40 4300904020721 4302904020721 Cartonbox 25
40-25-40 4300904020821 4302904020821 Cartonbox 50 PP-R Crossover w Socket
40-32-40 4300904020921 4302904020921 Cartonbox 20 Dia. Code - White Code - Green Packing
50-20-50 4300905021021 4302905021021 Cartonbox 10 (mm) Type Pc
63-20-63 4300906321321 4302906321321 Cartonbox 24
63-25-63 4300906321421 4302906321421 Cartonbox 12
63-32-63 4300906321521 4302906321521 Cartonbox 8
63-40-63 4300906321621 4302906321621 Cartonbox 16
63-50-63 4300906321721 4302906321721 Cartonbox 10
PP-R Cross
75-63-75 4300907521722 4302907521722 Cartonbox 10
75-32-75 4300907521822 4302907521822 Cartonbox 10 Dia. Code - White Code - Green Packing
75-40-75 4300907521922 4302907521922 Cartonbox 10 (mm) Type Pc
PP-R Aquasystem
PP-R Reducing Cross PP-R Omega

Dia. Code Packing
Dia. Code - White Code - Green Packing [mm] Type Pc
(mm) Type Pc
4300902007022
20 Cartonbox 15
25-20 4300902560222 - Cartonbox 150
4300902507122
25 Cartonbox 10
32-25 4300903260322 4302903260322 Cartonbox 75
4300903207222
32 Cartonbox 7
40-32 4300904060422 4302904060422 Cartonbox 40
4300904007322
40 Cartonbox 5
PP-R Saddle w Spigot Female - (G-Type)
Dia. Code - Green Packing

(mm) Type Pc PP-R Pipe Clamp Single
40 - 20 4302904090022 Cartonbox 50
40 - 25 4302904090122 Cartonbox 50 (mm) Type Pc
50 - 20 4302905090022 Cartonbox 50 20 4300902025021 4302902025021 Cartonbox 500
90 - 20 4302909090022 Cartonbox 50
90 - 25 4302909090122 Cartonbox 50
90 - 32 4302909090222 Cartonbox 25
90 - 40 4302909090322 Cartonbox 25
110 - 20 4302911090022 Cartonbox 50
110 - 25 4302911090122 Cartonbox 50
110 - 32 4302911090222 Cartonbox 24
110 - 40 4302911090322 Cartonbox 25
125 - 20 4302912590022 Cartonbox 50
Pipe Double Clamp
125 - 25 4302912590122 Cartonbox 50
125 - 32 4302912590222 Cartonbox 25 Dia. Code - White Code - Green Packing
125 - 40 4302912590322 Cartonbox 25 (mm) Type Pc

32 4300903225722 4302903225722 Cartonbox 200
Flange Adapter
(mm) Type Pc
25 4302902533022 Cartonbox 50
32 4302903233022 Cartonbox 50
PP-R Male Coupler (Round) - (G-Type)
40 4302904033022 Cartonbox 50 Dia. Code - White Code - Green Packing
63 4302906333022 Cartonbox 10 20-1/2" 4300702032021 4302702032021 Cartonbox 250
160 4302916033022 Cartonbox 1 32-1" 4300703232421 4302703232421 Cartonbox 100
60
PP-R Aquasystem
PP-R Male Coupler (Round) - (BSPT-R) PP-R Male Coupler (Hexagonal) - (BSPT-R)
Dia. Code - Green Packing Dia. Code - Green Packing

20-1/2" 4302702040221 Cartonbox 250 32-1" 4302703230321 Cartonbox 80
20-3/4" 4302702040321 Cartonbox 200 40-1.1/4" 4302704040121 Cartonbox 50
32-1" 4302703240321 Cartonbox 100 90-3" 4302709029621 Cartonbox 10
110-4" 4302711027821 Cartonbox 4
PP-R Female Coupler (Round) - (G-Type)

PP-R Female Coupler (Hexagonal) (G-Type)
(mm) Type Pc
(mm) Type Pc
20-1/2" 4300702030021 4302702030021 Cartonbox 325
32-1" 4300703225021 4302703225021 Cartonbox 40
20-3/4" 4300702030121 4302702030121 Cartonbox 250
40-1.1/4" 4300704025121 4302704025121 Cartonbox 30
25-1/2" 4300702530221 4302702530221 Cartonbox 225
50-1.1/2" 4300705025221 4302705025221 Cartonbox 10
25-3/4" 4300702530321 4302702530321 Cartonbox 225
63-2" 4300706325321 4302706325321 Cartonbox 5
32-1" 4300703230421 4302703230421 Cartonbox 125
75-2.1/2" 4300707525421 4302707525421 Cartonbox 16
32-3/4" 4300703225321 4302703225321 Cartonbox 100
90-3" 4300709025621 4302709025621 Cartonbox 10
110-4" 4300711025521 4302711025521 Cartonbox 3
PP-R Female Coupler (Round) - (BSPT-Rp)

PP-R Female Coupler (Hexagonal) - (BSPT-Rp)
(mm) Type Pc Dia. Code - Green Packing
(mm) Type Pc
20-1/2" 4302702040021 Cartonbox 325
32-1" 4302703240221 Cartonbox 125 75-2.1/2" 4302707525621 Cartonbox 16

90-3" 4302709028621 Cartonbox 10
110-4" 4302711025721 Cartonbox 4
PP-R Male Coupler (Hexagonal) - (G-Type)

PP-R Male Elbow (G-Type)
(mm) Type Pc Dia. Code - White Code - Green Packing
32-1" 4300703227021 4302703227021 Cartonbox 40 (mm) Type Pc
40-1.1/4" 4300704027121 4302704027121 Cartonbox 50 20-1/2" 4300102007021 4302102007021 Cartonbox 200
63-2" 4300706327321 4302706327321 Cartonbox 20 25-1/2" 4300102507221 4302102507221 Cartonbox 180
90-3" 4300709027521 4302709027521 Cartonbox 4 32-3/4" 4300103207421 4302103207421 Cartonbox 75
110-4" 4300711027621 4302711027621 Cartonbox 4 32-1” 4300103207521 4302103207521 Cartonbox 80
PP-R Aquasystem
PP-R Male Elbow (BSPT-R) PP-R Female Tee - (G-Type)
Dia. Code - Green Packing Dia. Code - White Code - Green Packing
20-1/2" 4302102030221 Cartonbox 200 20-1/2" 4300902010021 4302902010021 Cartonbox 160
32-1” 4302103230321 Cartonbox 80 32-1” 4300903210521 4302903210521 Cartonbox 30
PP-R Female Tee (BSPT-Rp)

(mm) Type Pc
20-1/2" 4302902030021 Cartonbox 160
20-3/4" 4302902030121 Cartonbox 160
25-1/2" 4302902530021 Cartonbox 120
PP-R Female Elbow (G-Type) 25-3/4" 4302902530121 Cartonbox 120
Dia. Code - White Code - Green Packing 32-3/4" 4302903230021 Cartonbox 60
(mm) Type Pc 32-1” 4302903230121 Cartonbox 70
20-1/2" 4300102006021 4302102006021 Cartonbox 200
20-3/4" 4300102006121 4302102006121 Cartonbox 80
25-1/2" 4300102506221 4302102506221 Cartonbox 175
25-3/4" 4300102506321 4302102506321 Cartonbox 140 PP-R Union Socket Female (G-Type)
32-3/4" 4300103206421 4302103206421 Cartonbox 30 Dia. Code - White Code - Green Packing
32-1” 4300103206521 4302103206521 Cartonbox 30 (mm) Type Pc
20-1/2” 4300902003021 4302702003021 Cartonbox 100
20-3/4” 4300902003121 4302902003121 Cartonbox 150
25-3/4" 4300902503321 4302702503121 Cartonbox 50
32-1" 4300903203521 4302703203521 Cartonbox 50
40-1.1/4" 4300904005021 4302904005021 Cartonbox 20
50-1.1/2" 4300905005121 4302905005121 Cartonbox 15
63-2” 4300906305221 4302906305221 Cartonbox 4
PP-R Female Elbow (BSPT-Rp)

PP-R Union Socket Female (BSPT-Rp)
(mm) Type Pc Dia. Code - Green Packing
20-1/2" 4302102030021 Cartonbox 200 (mm) Type Pc
20-3/4" 4302102030121 Cartonbox 200 20-1/2” 4302702030421 Cartonbox 300
25-1/2" 4302102530021 Cartonbox 175 20-3/4” 4302902030321 Cartonbox 150
25-3/4" 4302102530121 Cartonbox 140 25-3/4" 4302702530021 Cartonbox 150
32-1” 4302103230121 Cartonbox 75 40-1.1/4" 4302904030021 Cartonbox 50

50-1.1/2" 4302905030021 Cartonbox 30
63-2” 4302906330021 Cartonbox 20
PP-R Union Male Female (G-Type)

(mm) Type Pc
20-1/2” 4300902004021 4302702004021 Cartonbox 150
20-3/4” 4300902004121 4302902004121 Cartonbox 50
PP-R Male Tee - (G-Type)
25-3/4" 4300902504321 4302702504321 Cartonbox 150
Dia. Code - White Code - Green Packing 32-1" 4300903204521 4302703204521 Cartonbox 50
(mm) Type Pc
40-1.1/4" 4300904005321 4302904005321 Cartonbox 20
20-1/2" 4300902012021 4302902004021 Cartonbox 60
50-1.1/2" 4300905005421 4302905005421 Cartonbox 15
20-1/2" - 4302902030221 Cartonbox -
63-2” 4300906305521 4302906305521 Cartonbox 10
62
PP-R Aquasystem
PP-R Union Socket Male (BSPT-R)
PP-R Backplate Elbow Double Female (G-Type)
(mm) Type Pc Dia. Code - White Code - Green Packing
(mm) Type Pc
20-1/2” 4302702030521 Cartonbox 300
25-1/2” 4300902502121 4302902502121 Cartonbox 40
20-3/4” 4302902030421 Cartonbox 150
25-3/4" 4302702530121 Cartonbox 150
32-1" 4302703230121 Cartonbox 125
40-1.1/4" 4302904030121 Cartonbox 50
50-1.1/2" 4302904030121 Cartonbox 30
63-2” 4302904030121 Cartonbox 20
Transition w Loose Nut

(mm) Type Pc
20-1/2” 4300902013021 4302902013021 Cartonbox 100
20-3/4” 4300902513221 4302902513221 Cartonbox 100
25-1’’ 4300902513321 4302902513321 Cartonbox 50
PP-R Backplate Elbow Male (G-Type)
(mm) Type Pc
20-1/2” 4300902002121 4302902002121 Cartonbox 150
PP-R Faucet Connection- Bidet (G-Type)

Dia. Code Packing
[mm] Type Pc
4300902012121 Parcel 15
20-1/2”
PP-R Backplate Elbow Male (G-Type)

(mm) Type Pc
25-3/4" 4300102509221 4302102509221 Cartonbox 100
25-3/4" * 4302102530621 Cartonbox 100
Note: Please ask for Product Manager.
PP-R Distribution Manifold

(mm) Type Pc
20-1/2” 4300902002321 4302902002321 Cartonbox 15
PP-R Backplate Elbow Female (G-Type)

(mm) Type Pc
20-1/2" 4300902002021 4302902002021 Cartonbox 150
25-1/2" 4300102508221 4302102530421 Cartonbox - PP-R Backplate Elbow Female 2 Pins (G-Type)
20-1/2" - 4302902030721 Cartonbox -
25-3/4" - 4302102530621 Cartonbox - Dia. Code - White Code - Green Packing
20-1/2" - 4302902030621 Cartonbox - (mm) Type Pc
25-1/2" 4300902503121 4302902503121 Cartonbox 50
20-1/2" 4300902011021 4302902011021 Cartonbox 50
PP-R Backplate Elbow Female (G-Type)

PP-R Double Male Faucet Connection (G-Type)
(mm) Type Pc
20-3/4" 4300102008121 4302102008121 Cartonbox 100 Dia. Code Packing
[mm] Type Pc
25-1/2" 4300102508221 4302102508221 Cartonbox 100
25-3/4" 4300102508321 4302102508321 Cartonbox 100 4300902502021 Parcel 40
25-1/2”
PP-R Aquasystem
PP-R Saddle w Spigot Female PP-R Check Valve – PN10
(mm) Type Pc
(mm) Type Pc
40-1/2'' 4302904091122 Cartonbox 50
20 4300902031022 4302902031022 Cartonbox 20
50-1/2'' 4302905091122 Cartonbox 50
25 4300902531122 4302902531122 Cartonbox 50
50-3/4'' 4302905091022 Cartonbox 50
32 4300903231222 4302903231222 Cartonbox 40
63-1/2'' 4302906391122 Cartonbox 50
40 4300904031322 4302904031322 Cartonbox 24
63-3/4'' 4302906391022 Cartonbox 50
50 4300905031422 4302905031422 Cartonbox 15
75-1/2'' 4302907591122 Cartonbox 50
63 4300906331522 4302906331522 Cartonbox 8
75-3/4'' 4302907591022 Cartonbox 50
75 4300907531622 4302907531622 Cartonbox 4
75-1'' 4302907591222 Cartonbox 25
90 4300909031722 4302909031722 Cartonbox 2
90-1/2'' 4302909091122 Cartonbox 50
Note: Only for cold water applications.
90-3/4'' 4302909091022 Cartonbox 50
90-1'' 4302909091222 Cartonbox 25
110-1/2'' 4302911091122 Cartonbox 50
110-3/4'' 4302911091022 Cartonbox 50
110-1'' 4302911091222 Cartonbox 25
125-1/2'' 4302912591122 Cartonbox 50
125-3/4'' 4302912591022 Cartonbox 50
125-1’’ 4302912591222 Cartonbox 25
Union Ball Valve – PN10
(mm) Type Pc
20 4300802042522 4302802042522 Cartonbox 70
25 4300802542622 4302802542622 Cartonbox 50
32 4300803242722 4302803242722 Cartonbox 30
40 4300804043122 4302804043122 Cartonbox 15
50 4300805043222 4302805043222 Cartonbox 12
PP-R Electro Fusion Coupler 63 4300806343322 4302806343322 Cartonbox 8
Dia. Code - Green Packing Note: Only for cold water applications.
(mm) Type Pc
20 4302902091522 Cartonbox 150
25 4302902591522 Cartonbox 130
32 4302903291522 Cartonbox 80
40 4302904091522 Cartonbox 50
50 4302905091522 Cartonbox 30
63 4302906391522 Cartonbox 20
75 4302907591522 Cartonbox 14
Ball Valve New (Welt-In) - PN20
90 4302909091522 Cartonbox 10
110 4302911091522 Cartonbox 3 Dia. Code - White Code - Green Packing
(mm) Type Pc
125 4302912591522 Cartonbox 3
20 4300802042822 4302802042822 Cartonbox 30
160 4302916091522 Cartonbox 2
25 4300802542922 4302802542922 Cartonbox 30
32 4300803243022 4302803243022 Cartonbox 45
40 4300804043622 4302804043622 Cartonbox 10
50 4300805043722 4302805043722 Cartonbox 20
63 4300806343822 4302806343822 Cartonbox 3
75 4300807543322 4302807543322 Cartonbox 8
PP-R Union – PN10

(mm) Type Pc
20 4300902028021 4302902028021 Cartonbox 100
25 4300902528121 4302902528121 Cartonbox 50
32 4300903228221 4302903228221 Cartonbox 80
PP-R Gate Valve
40 4300904028321 4302904028321 Cartonbox 20
50 4300905028421 4302905028421 Cartonbox 15 Dia. Code - White Code - Green Packing
63 (mm) Type Pc
4300906328521 4302906328521 Cartonbox 20
75 4300907528621 4302907528621 Cartonbox 16 20-1/2" 4300802035021 4300802035021 Cartonbox 75
90 4300909032521 4302909032521 Cartonbox 8 25-3/4" 4300802535121 4300802535121 Cartonbox 20
Note: Only for cold water applications.

32-1" 4300803235221 4300803235221 Cartonbox 15
64
PP-R Aquasystem
PP-R Chromium Valve Short PP-R Pipe Sharpener Plastic
Dia. Code - White Code - Green Packing Dia. Code - White Packing
20-1/2" 4300802040021 4302802040021 Cartonbox 20 20-25 4300902041022 Cartonbox 70
25-3/4" 4300802540221 4302802540221 Cartonbox 20 32-40 4300903241122 Cartonbox 50
32-1" 4300803240421 4302803240421 Cartonbox 10
Welding Machine
Dia. Code - White Packing
(mm) Type Pc
d20-d125 4301900045082 Metalbox 1
PP-R Chromium Valve Long d20-d100 4301900044382 Cartonbox 1

(mm) Type Pc
20-1/2" 4300802040121 4302802040121 Cartonbox 50
25-3/4" 4300802540321 4302802540321 Cartonbox 20
32-1" 4300803240521 4302803240521 Cartonbox 40 Welding Machine

(mm) Type Pc
75-100 4301900044382 Cartonbox 1
PP-R Lux Chromium Valve Long

Dia. Code - White Code - Green Packing Welding Machine
(mm) Type Pc
20-1/2" 4300802060721 4302802060721 Cartonbox 20 Dia. Code - White Packing
(mm) Type Pc
25-3/4" 4300802560821 4302802560821 Cartonbox 40
63-160 4301900045982 Cartonbox 1
32-1" 4300803240621 4302803240621 Cartonbox 40
PP-R Pipe Cutter

(mm) Type Pc
PP-R Pipe Sharpener Metal
- 4301900043082 Parcel 4
(mm) Type Pc
20-25 4301902040082 Cartonbox 100
32-40 4301903240182 Cartonbox 50
50-63 4301905040282 Cartonbox 15
75-90 4301907540382 Cartonbox 8 PP-R Pipe Welding Mould

(mm) Type Pc
20 4301902045082 Cartonbox 300
25 4301902545182 Cartonbox 15
32 4301903245282 Cartonbox 200
40 4301904045382 Cartonbox 40
50 4301905045482 Cartonbox 70
PP-R Boiler Set 63 4301906345582 Cartonbox 45
Type Code - White Packing 75 4301907545682 Cartonbox 30
Type Pc 90 4301909045782 Cartonbox 5
Round (Gate Straight) 4300900050022 Cartonbox 8 110 4301911045882 Cartonbox 5
Corner (Gate Angled) 4300900050122 Cartonbox 8 160 4301916046082 Cartonbox -
PE-RT
Piping Systems
PE-RT pipes are heat-resistant Polyethylene pipes. Its extension is PE raised temperature, which means
resistant to high temperatures. They are produced in accordance with TS EN ISO 22391 standard. They are
available in three different options as standard, standard with spiral cover other and oxygen barrier.
• Ensures fast and easy installation thanks to its lightweight and • Easy to carry and install due to production in the form of coil.
flexible structure. • Hygienic.
• Resistant to high pressure and temperature. •Thanks to oxygen barrier (EVOH), it ensures full protection
• 100% recyclable environment-friendly against corrosion and oxidation that might occur due to
• High chemical resistance. penetration of oxygen into close-loop system.
• No factors such as corrosion and calcification that reduces
internal diameter.
- Hot and cold water installations
- Underfloor heating systems
- Drinking water systems
- Heat transfer applications at low/high temperatures
- Transfer of chemicals
- Radiators, air conditioners, coolers
Outer Layer EVOH

Adhesive
Inner Layer PE-RT
* Approved by KIWA
Pipe Structure One Layered, Oxygen Barrier, 3 Layered with and without jacket pipe
Diameters [mm] d16-d20
Coil Length [m] 240 m
Maximum Operating Pressure Refer to pressure values that indicated in page 112
Jointing method Mechanical threaded connection
Color Natural
Chemical Resistance Resistant to organic and inorganic chemicals for pH values between 2 and 12
Roughness Ratio 0.007 mm
Maximum Service Temperature 70°C
Maximum Temperature Resistance 95°C
Thermal Conductivity 0.42-0.48 W/m°K
Linear Expansion Coefficient 0.2 mm/m°K
66
PE-XA
Piping Systems
PE-Xa pipes are the three layer pipes with EVOH barrier, specifically produced for heating and cooling
systems. PE-Xa pipes are the most suitable choice to meet project design requirements and ambient
conditions. They are easier to install as compared to other type PE-X pipes.
Infrared lights are used for the purpose of creating peroxide For high performance against temperatures according to TS EN
radicals for the production of PE-Xa pipes. The new and modern 15875 and DIN 16892 standards, pipes must as a minimum have
shortwave infrared technology used to cross link the pipes ensures the following cross linking degrees. PE-X Pipes are divided into 4
higher production speed than conventional methods. The following classes depending upon the cross linking methods:
methods used to cross link polyethylene pipe as PE-X determine PE-XA: Pipes cross linked with peroxide (Minimum 70% cross link)
the type of PE-X pipe. Cross link ratio is over 70%. PE-XB: Pipes cross linked with hydrocyclone (Minimum 65% cross
link)
• Has oxygen barrier characteristics and prevents the penetration PE-XC: Pipes cross linked with radiation (Minimum 60% cross link)
of oxygen in the air through pipe. PE-XD: Pipes cross linked with nitrogen (Minimum 60% cross link)
• High resistance to chemicals.
• Easy to install by using pipe unions without need for heavy Peroxide method is the only process in which cross links are created
equipment. above the melting point (>200°C). As the resulting crystallites are
• Installed in short time without any wastage as they are produced melted during the cross linking, homogenous dispersion of cross
in the form of coils. links in the pipes is achieved.
• No corrosion.
• No reaction with minerals, no diameter reduction.
Outer Layer EVOH

Fields of Application Adhesive
• Floor heating systems

Inner Layer PE-XA
• Snow melting systems
• Ice rinks
• Mobile system radiator heating
• Hot and cold water distribution systems
• Heat transfer applications at low/high temperatures
• Transfer of chemicals
Pipe Structure 3 layered
Diameters [mm] d16-d17Coil Length [m] 240 m
Jointing method Mechanical threaded connection
Color Blue
Standards EN 15875 , DIN 4726
Cross Linking Ratio >70 % weight
Roughness Ratio 0.007 mm
Maximum Service Temperature 95°C
Thermal Conductivity 0.35-0.38 W/m°K
Linear Expansion Coefficient 0.2 mm/m°K
PE-XB
Piping Systems
These are the most preferred pipes systems for heating and cooling pipe systems, made of polyethylene by
cross links and stands out with their flexibility.
• At GF Hakan Plastik, cross linking process for PE-XB pipes is • Oxygen Barrier prevents the penetration and dissolution of
conducted according to the silane method. oxygen in the pipe transmitted and also:
• Complies with EN ISO 15875-2 and DIN 16892 system standards. - Prevents the living and growth of microorganisms; ensures
• Sheathed or unsheathed options are available. confidence in terms of hygiene
• Produced in two different methods for pipes and fittings in the - Prevents the diffusion of oxygen in the pipe and blocks the
diameters of d16, d18, d20, d25 and d32 mm: corrosion of installation components; ensures smooth operation
- Standard Flexa PE-Xb Pipes of radiators and valvaes.
- Oxygen Barrier - Flexa PE-Xb Pipes • Ensures fast and easy installation with O-ring geared connection
mechanism.
• Hot and cold water distribution systems, drinking water systems • Ice rinks
• Heat transfer applications at low/high temperatures • Transfer of chemicals.
• Floor heating systems. • Radiators, air conditioners, coolers
• Snow melting systems
Diameter Range [mm] d16 - d32
Thermal Expansion Coefficient 0,2 mm / m°K
Thermal Conductivity Coefficient 0,41 W/m°K;
Operating Temperature Range -40°C - 95°C
Outer Layer EVOH

Adhesive
Inner Layer PE-XB
68
PE-XA, PE-XB, PE-RT
PE-XB Crosslink Pipe Oxygen Barrier PE-XA Pipe
Dia Thic. Code Packing Dia Thic. Code Packing

(mm) (mm) Type Meter (mm) (mm) Type Meter
16 1,8 6000001606631 Coil 160 16 2 6204001600132 Coil 240
16 2 6000001600131 Coil 160 17 2 6204001700132 Coil 240
16 2,2 6020001600131 Coil 160
20 2 6000002000231 Coil 100
20 2,8 6020002000231 Coil 100 Oxygen Barrier PE-XA Pipe
25 2,5 6000002500331 Coil 50
32 3 6000003200431 Coil 50 Dia Thic. Code Packing
(mm) (mm) Type Meter
16 2 6204001600232 Coil 80
17 2 6212001600232 Coil 80
PE-XB (Monolayer) with Red Spiral Cover
Dia Thic. Code Packing

(mm) (mm) Type Meter PE-RT Pipe
16 2 6012001601631 Coil 100
16 1,8 6012001603531 Coil 100 Dia Thic. Code Packing
16 2,2 6022001601631 Coil 100 (mm) (mm) Type Meter
16 2 6000001610031 Coil 160
20 2 6000002010031 Coil 100
PE-XB (Monolayer) with Blue Spiral Cover

PE-RT (Monolayer) with Spiral Cover
Dia Thic. Code Packing
(mm) (mm) Type Meter Dia Thic. Code Packing
16 2 6004001601631 Coil 100 (mm) (mm) Type Meter
16 1,8 6004001603531 Coil 100 16 2 6012001610031 Coil 100
16 2,2 6024001601631 Coil 100 16 2 6004001610031 Coil 100
Oxygen Barrier PE-XB Crosslink Pipe
Dia Thic. Code Packing Oxygen Barrier PE-RT Pipe

16 2 6200001600131 Coil 160 Dia Thic. Code Packing
20 2 6200002000331 Coil 100
16 2 6200001600331 Coil 160
25 2,5 6200002500431 Coil 50
Oxygen Barrier PE-XB with Red Spiral Cover Oxygen Barrier PE-RT with Spiral Cover
Dia Thic. Code Packing Dia Thic. Code Packing

(mm) (mm) Type Meter (mm) (mm) Type Meter
16 2 6212001600131 Coil 100 16 2 6204001600231 Coil 100
16 2,2 6222001600131 Coil 100 16 2 6212001600331 Coil 100
20 2 6212002000231 Coil 100
Oxygen Barrier PE-XB with Blue Spiral Cover Spiral Cover
Dia Thic. Code Packing Dia Color Code Packing

(mm) (mm) Type Meter (mm) Type Meter
16 2 6204001600131 Coil 100 25 Red 6112002500131 Coil 100
16 2,2 6224001600131 Coil 100 25 Blue 6104002500131 Coil 100
16
20 2 6204002000231 Coil 100 32 Red 6112003200231 Coil 50
32 Blue 6104003200231 Coil 50
Hoses
GF Hakan Plastic Hoses are made of PVC raw material and are used for the transfer of various liquids and
gases. GF Hakan Plastic PVC Hoses are multi-layered and have various type and color options depending upon
the fields of use.
• Internal surfaces are smooth and slippery and offer high flexibility.
• High resistance to impacts, abrasion and weather conditions.
- Hoses packed in the form of coils should be stacked horizontally - Hoses should be used in line with the operating pressures.
and properly to ensure that no deformation occurs. - Hoses should be protected against sharp and perforation
- Storage temperature should be between 10°C and 30°C. impacts.
- As low temperatures cause hoses to get hard and fragile, the - Hoses should not be kept outdoors and under the sunlight.
hoses kept below 10°C should be taken to the normal ambient
temperature (20°C) prior to use.
Fields of Application Technical Properties

• Used for the discharge of all kinds of waters, salty water Product Diameter Range [mm] d19 - d200
etc. in agriculture, industry, construction sites. Operating Temperature Range From 5°C to +50°C
GF Hakan Plastik Hose Types

Spiral Hoses • Natural Soft Hose
• Absorbing Hose – Green • Braided Natural Soft Hose
• Absorbing Hose- Yellow • WASH - Shower & Water Heater & Washing Machine Hose -
• Delivery Hose – Red Blue, Red, Grey
• Dust, Air Hose - Grey
• Throat -Washbasin Siphon Hoses Industrial Hoses
• Air Conditioner Hoses • Thermo Water Hose
• Mid Pressure Thermo Water Hose
Garden Hoses (Braided) • Multi-Purpose Thermo Air and Water Hose
• PVC Braided Hose- Blue • Thermo Air Hose
• PVC Braided Hose – Yellow • Thermo Air - Twin Hose
• PVC Braided Hose - Phosphorous Green • Pulverizator Hose 90 Bars
• PVC Braided Hose - Phosphorous Orange • Pulverizator Hose 40 Bars
• PVC Transparent Braided Hose- Middle
• PVC Transparent Braided Hose Transparent Hoses (Tekna)
• PVC Transparent Braided Hose - Thick • Water Level Hose
• PVC Transparent Braided Hose - Super • PVC Pure Hose
70
Hose
Hard PVC Reinforced Hard PVC Reinforced

Spiral-Green Absorbing, Delivery Hose Spiral-Red Delivery Hose
Dia. Inch Code Packing Dia. Inch Code Packing
[mm] Type Leng. (m) [mm] Type Leng. (m)
50 2” 2402020005411 Coil 50 50 2” 2412020007411 Coil 50

63 2.1/2” 2402021205511 Coil 24 75 3” 2412030007611 Coil 24
75 3” 2402030005611 Coil 24 100 4” 2412040007811 Coil 24
100 4” 2402040005811 Coil 24 125 5” 2412050007911 Coil 24
125 5” 2402050005911 Coil 24 150 6” 2412060008011 Coil 24
150 6” 2402060006011 Coil 24
200 8” 2402080006111 Coil 24
Hard PVC Reinforced

Spiral-Yellow Absorbing Hose NT / Natural Soft Hose

[mm] Type Leng. (m) [mm] Type T
ype Leng. (m)
19 3/4” 2405003403011 Coil 50 12,5 1/2” 2415001200111 Eco Coil 100

25 1” 2405010003011 Coil 50 12,5 1/2” 2415001200211 Super Coil 100
38 1.1/2” 2405011203211 Coil 50 16 5/8” 2415005800311 Eco Coil 100
40 2405004003011 Coil 50 19 3/4” 2415003400211 Eco Coil 100
50 2” 2405020003311 Coil 50 19 3/4” 2415003400311 Super Coil 100
63 2.1/2” 2405021203411 Coil 24 25 1” 2415010000411 Eco Coil 50
75 3” 2405030003511 Coil 24 25 1” 2415010000511 Super Coil 50
100 4” 2405040003711 Coil 24 32 1.1/4” 2415011400611 Eco Coil 50
125 5” 2405050003811 Coil 24 32 1.1/4” 2415011400711 Super Coil 50
Braided Natural Soft Hose
Dia. Inch Code Packing

[mm] Type Leng. (m)
12,5 1/2” 2415001200311 Coil 100
16 5/8” 2415005800511 Coil 100
19 3/4” 2415003400411 Coil 100
25 1” 2415010000611 Coil 50
32 1.1/4” 2415011400811 Coil 50
Hose
PVC Transparent Braided Hose - Super Washbasin/ Throat - Washbin Siphon Hose

12,5 1/2” 2415001200411 Coil 100 25 1” 2411010011111 Coil 50
16 5/8” 2415005800611 Coil 100 29 1.1/7” 2411011711211 Coil 50
19 3/4” 2415003400511 Coil 100 32 1.1/4” 2411011411311 Coil 50
25 1” 2415010000711 Coil 50 38 1.1/2” 2411011211411 Coil 50
32 1.1/4” 2415011400911 Coil 50 50 2” 2411020011511 Coil 50
38 1.1/2” 2415011200811 Coil 50
PVC Transparent Braided Hose - Eco Air Conditioner Hose

12,5 1/2” 2413001240011 Coil 100 16 5/8” 2411005810011 Coil 50
16 5/8” 2413005840011 Coil 100 19 3/4” 2411003410011 Coil 50
19 3/4” 2413003440011 Coil 100
25 1” 2413010040011 Coil 50
32 1.1/4” 2413011440011 Coil 50
38 1.1/2” 2413011240011 Coil 50
Water Level Hose PVC Pure Hose

[mm] Type Leng. (m) [mm] Type T
ype Leng. (m)
8 5/16” 2411000813011 Coil 100 12,5 1/2” 2411001200111 Eco Coil 100
10 3/8” 2411001013111 Coil 100 12,5 1/2” 2411001200211 Super Coil 100
16 5/8” 2411005800211 Eco Coil 100
19 3/4” 2411003400411 Super Coil 100
25 1” 2411010000511 Super Coil 50
32 1.1/4” 2411011400611 Super Coil 50
38 1.1/2” 2411011200711 Super Coil 50
72
Hose
Thermo Water Hose PVC Braided Hose - Garden Blue

12,5 1/2” 2415001200511 Coil 100 12,5 1/2” 2404001200011 Coil 100
19 3/4” 2415003400611 Coil 100 19 3/4” 2404003400011 Coil 100
25 1” 2415010000811 Coil 50 25 1” 2404010000011 Coil 50
32 1.1/4” 2415011401011 Coil 50
38 1.1/2” 2415011200911 Coil 50
Mid Pressure Thermo Water Hose PVC Braided Hose- Garden Phosphorous Green

12,5 1/2” 2415001200611 Coil 100 12,5 1/2” 2402001200211 Coil 100
19 3/4” 2415003400711 Coil 100 19 3/4” 2402003400011 Coil 100
25 1” 2415010000911 Coil 50 25 1” 2402010000011 Coil 50
32 1.1/4” 2415011401111 Coil 50 32 1.1/4” 2402011400011 Coil 50
38 1.1/2” 2415011201011 Coil 50 38 1.1/2” 2402011200011 Coil 50
Building Technology (BT) Soil and Waste Water Pipe
Range Installation Instructions
Building Technology (BT) Solid and

Waste Water
•Silenta Premium Pipe Range
Sound-Insulated Installation
Piping Systems
Instructions
•Silenta FR Fire Resistant and Sound-Insulated Piping Systems
•Silenta 3A Sound-Insulated Piping Systems
•HT-PP Soil and Waste Water Piping Systems
• Silenta Extreme Fire Resistant and Noise-Insulated Halogen
•PVC Soil and Waste Water Piping Systems
Free Piping Systems
•PVC Rain Gutters
• Silenta Premium Sound-Insulated Piping Systems
• Silenta 3A Sound-Insulated Piping Systems
• Silenta FR Fire Resistant and Sound-Insulated Piping Systems
• HT-PP Soil and Waste Water Piping Systems
• PVC Soil and Waste Water Piping Systems
• PVC Rain Gutters
74
Installation
Make sure that your products are When interval measurements

clean. If necessary, wipe the jointing are required, mark the pipe with
points with a dry cloth. the desired measurements.
1 2
Chamfer the spigot of pipe by

Cut in 90° angle by using a coping using a chamfering device or
saw or a proper cutter. thick riffler.
3 4
Remove the burrs on the

Now, your pipe is ready for
external edges with a knife
installation.
or scraper.
5 6
Mark the pipe clamp distances

Drill the marked points with a properly with 1% inclination on the
driller and place dowels into the wall or ceiling where they will be
holes. installed. (as flat wall)
7 8
Mark the part of the pipe that will be Apply a lubricating liquid
attached to the fitting as much as (silicone etc.) to the socket
the jointing distance. part of the pipe.
9 10
After the pipe and fittings are

jointed, place them and tighten
the clamps.
11
76
Installation
Rubber Ring (Push Fit) Jointing

1- Mouth of the pipe should be absolutely chamfered. If the mouth 5- Parts to be jointed should be levelled.
of the pipe was cut, it should be chamfered. 6- Push the spigot end of the pipe or fitting into the socket
2- Check if the sealing gasket is accurately placed on the pipe or completely. If the application is longer than 2 m, pull the spigot
fitting socket groove. end 10 mm back after placing it into the socket completely, to
3- All installation parts should be dry and clean. There should prevent the effects of thermal expansion.
be no deformation, notches or similar scratches on the pipes or 7- Finally, check again if the gap left for thermal expansion still
fittings. exists or not.
4- Apply a proper silicone-based lubricating liquid on the spigot
end of the pipe or fitting. Do not use liquid soap, grease or similar
petroleum derivatives.
Pipe Hanging and Clamping

Always use GF Hakan silent pipe clamp to minimize the sound caused by vibration. Maximum clamping distances of the pipes should
always comply with the values provided in the following table.
1- While fixing the pipe with clamps, pay special attention to not 5- While fitting the fixed clamp, pay attention to keep 10 mm
cause any tension and stress on pipes. distance left on the flat end for expansion.
2- Pipe cannot move after tightening the screws of the fixed 6- Use a fixed clamp after each fitting or fitting group.
clamps. For sliding clamps, pipe will continue to move inside the 7- All clamps to be added to the system apart from the fixed
clamp even after tightening the screws. clamps in the horizontal or vertical line should be sliding clamp
3- For each line longer than 2 m, use 1 fixed clamp immediately that allows for thermal expansion caused by temperature
after the muff part. changes.
4- In vertical lines, always place the fixed clamp on the top point 8- Pipes and fittings should be fixed in short distances so that
of the pipe and below the socket part. they do not slide and release.
Maximum distances between the clamps
Clamp Distance
Nominal External Diameter
DN [mm]
For Horizontal Pipe Directions* Dmax m (max. 15 x da) For Vertical Pipe Directions* Dmax. m
50 0,75 1,50
75 1,10 2,00
90 1,35 2,00
110 1,65 2,00
125 1,85 2,00
160 2,40 2,00
200 3,00 2,00
250 3,00 2,00

Installation
Silent Pipe Clamp
Silent waste water piping systems are tested by the German The test equipment in the institute laboratory is standard and the
Fraunhofer Building Physics Institute in accordance with EN 14366 tests related to all waste water systems are conducted here. As
standard, and the reports about sound level are issued by this seen in the test equipment below, pipe, fittings, installation wall
institute. thickness, water discharge amount as well as silent pipe clamp
In the test equipment used in this institute, sound levels are systems are also significant factors in the test report.
measured at different flows and different parts of the building.
In the vertical lines, one group double and one single clamp should be used on each floor. In the horizontal lines, it is more suitable to use
single clamp.
Clamp Details
The clamp on top, which is one of the double clamps used in the vertical lines, is fully tightened and
grasps the pipe. The lower clamp is tightened up to the plastic wedges on the clamp. It is ensured that
the rubber surfaces of the clamp are not jointed. In this system, the purpose is to absorb the vibration
transmitted from waste water to pipe inside the first clamp and to minimize the vibration on the wall
through the second clamp.
The single clamp in the vertical lines is tightened up to the plastic wedges on the clamp and it is ensured
that the pipe is fixed to the wall. The single clamp in the horizontal lines is tightened up to the plastic
wedges on the clamp and it is ensured that the pipe is fixed to the ceiling or wall.
To achieve maximum acoustic performance, the silent pipe

clamps used in the test should be used in the installations as well.
Although there are different types of silent pipe clamps, they are
available in two kinds as fixed and movable.
The noise created in the waste water systems is transmitted by

two methods as air born and structure born.
1- Sound waves transmitted through air cause pressure in the

ambient and result in vibration on the objects and surfaces that
they hit. Thanks to the special formulas used in GF Hakan Plastik
Silenta products, these vibrations are absorbed and prevented
from being transferred out of pipe.
2- Sound waves transmitted through contact occur as a result of

the waste water and waste hitting the pipe wall. These vibrations
are transferred on the wall of the installation through contact.
The sound created by contact is significantly absorbed by the
special molecular structure of Silenta and specially-designed GF
Hakan silent clamps.
78
Installation
GF Hakan silent waste water pipe clamps ensure EN 14366

silence norms. In the waste water systems within buildings,
cused clamps, their positions and distances are as important as
silent pipes and fittings.
The clamp on top, which is one of the double clamps used in the
vertical lines, is fully tightened and grasps the pipe. The lower
clamp is tightened up to the plastic wedges on the clamp. It is
ensured that the rubber surfaces of the clamp are not jointed. In
this system, the purpose is to absorb the vibration transmitted
from waste water to pipe inside the first clamp and to minimize
the vibration on the wall through the second clamp.
The single clamp in the horizontal lines is tightened up to the

plastic wedges on the clamp and it is ensured that the pipe is
fixed to the ceiling or wall.
Rain Gutters and Fittings

- The standard production length of rain gutters is 4 m. If - During the application, always use clamp.
internal measurement is required, it can be cut at the desired - During the rain gutter installation, the distance between two
measurements in a way that all burrs are removed. clamps should never exceed 50 cm.
- Special attention should be paid to ensure that, while jointing - Rain downpipes are available in two different options as round
the rain gutter fittings with the gutter, gaskets that ensure water and rectangular. For round downpipes, you can use our Silenta
sealing are used. Product Range and PVC pipes.
- Two rain gutters are jointed by means of additional piece. - Ensure that annual maintenance is regularly carried out so
Make sure that lugs are fully fitted during the installation. that rain gutters are not clogged.
Building Technology (BT) Product Range
• Aquasystem PP-R and PP-RCT Piping Systems

• PE-RT, PE-Xa, PE-Xb Piping Systems
80
Installation
Aquasystem PP-R and PP-RCT Piping Systems
Make sure that pipes, fittings and welding machine are clean.
1 2
Before operating the socket fusion machine, make sure that the working area
is safe. To avoid the rotation and movement of parts, welding plates should be
appropriately placed into the welding machine.
3 4
Connect the welding machine to 220 Volts standard socket. Adjust the
temperature as 260°C (500 °F). Push the power button. Heating will take 1 to
3 minutes. When the temperature reaches 260°C (500°F), thermostat light will
switch off automatically.
5 6
Place the pipes cut in the desired

measurements and fittings into the welding
plates. If foiled (stabile) pipes are used, first
of all, shave the outer layer completely by
using a stripper. Make trials to ensure that
the blade is accurately adjusted.
7 8 9
Diameter Welding Depth Heating Time Welding Time Cooling Time

[mm] [mm] [mm] [s] [m]
Pipes and fittings should be heated
20 14 5 4 2 at the same time. Heating times vary
25 15 7 4 2
depending upon the diameters of pipes.
32 16,5 8 5 3
If you do not follow the times indicated
40 18 12 6 4
in the table, this will cause reduction in
50 20 18 7 4
the welding quality. If you heat them for
63 24 24 8 6
too much time, it will cause the pipe to
75 28 30 8 6
90 29 40 8 8 tighten so much and the fitting to expand
110 32,5 50 10 8 extremely, resulting in loose connection.
125 40 70 10 8
160 45 90 12 10
PP-RCT Pipes are fully compatible and weldable with our PP-R fittings:
• Same tooling/equipments
• Same welding parameters
• Same assembling instructions
Installation
10 11 12 13
After heating, take out the pipes Push the pipe into the fitting at After jointing it, wait for the cooling After cooling, the connection will be
and fittings from the welding straight angle without rotating it, process by following the cooling ready for use.
mould carefully. and joint it quickly. times indicated.
• After using it, switch off and disconnect the machine. Wait for operation, always beware of the position of the machine. Make
it to cool. Never use water to cool the welder because it will sure that welding plates are tightly fitted and not loose. Always
damage the metal heated. Always keep the welding plates dry. take occupational safety measures.
• Do not perform welding operation in ambient temperatures • Cut the pipes vertically by using the proper cutters. Make sure
below 5°C. As PP-R material is fragile in cold weather that the cutters are sharp.
conditions, treat the pipes with more attention in those • To guarantee a perfect connection, make sure that the
conditions. surfaces of the welding plates are in good quality and the
• While working with the welding machine, wear appropriate surfaces are always clean.
hand and arm protective gloves to avoid the risk of burning.
Wearing protection goggles are also recommended. During the
Test Instructions
Upon completion of the pipe installation, the installation should be

absolutely tested according to the following testing method. After The lines not to be used in the testing should be switched off and
making the controls, the installation should be switched off. each area should be separately tested. If, at the end of the testing, the
installation will not be used, it should be absolutely discharged. In terms
Testing Method i of freezing, no water should be available in the line not to be used.
1- All valves in the installation are switched off.
2- During the supply of water into the installation, the main valve is Thermal Expansions
switched on, but it should not be switched on too much. To protect the
installation against strong pressure impacts, the air of the installation is Linear expansion of pipes depends upon the difference between the
carefully released at the highest and the farthest point of the line. operating temperature and installation temperature:
3- Fill the installation with water slowly until water comes out at such
point. ∆T = TOperating Temperature - TInstallation Temperature
4- The valves of each area of the installation to be tested are switched
on and separately tested. Therefore, thermal expansion values of cold water applications could
be neglected. For hot water applications, the expansions should be
Starting the Test calculated due to the linear expansion depending upon the temperature
Pressure test is carried out in two steps. of the material, and the clamp distances should be adjusted based on
the tables.
Step 1: Testing is conducted for 30 minutes by 1.5 times more of the It should be taken into account that the critical parameter is thermal
highest operating pressure prescribed in the entire piping installation expansion coefficient.
within the building. During this period of time, the installation is
observed in terms of pressure drop and leakage in the minute 10 and 20. • Linear expansion coefficient of Aquasystem PP-R Standard pipes is
If there is pressure drop but not leakage, then water is re-supplied and 0.150 mm/m°K.
restored to the testing pressure. • Linear expansion coefficient of Aquasystem Faser Fiberglass
Reinforced and Climafaser Fiberglass Reinforced PP-R pipes is 0.035
Step 2: Pressure is applied for 2 hours by 1.5 fold of the highest mm/m°K.
operating pressure prescribed in the entire piping installation within • Linear expansion coefficient of Aquasystem Aluminum Foiled (Stable-
the building. There should not be any pressure drop at the end of such 2 Aluplus) PP-R pipes is 0.030 mm/m°K.
hours.
82
Installation
Total linear expansion of PP-R system is calculated according to

the following formula: For example, 2 m-long Aquasystem Glass Fiber Reinforced (Faser)
∆L = Lo x α x ∆T PP-R pipe operates at 65°C and installed at 25°C, rectilinear
∆L; Linear Expansion (mm) expansion is calculated as follows:
Lo; Pipe Installation Length (m) ∆L = Lo x α x ∆T
α; Linear coefficient of thermal expansion ∆L = 2 x 0,035 x 40
∆T; Temperature Difference Between Operating and ∆L = 2,8 mm
Installation Temperature Briefly, if a 2 meter long system is made with Aquasystem Glass
(°K, °C or °F) Fiber Reinforced PP-R product and is exposed to 40°C temperature
difference, the system demonstrates 2,8 mm thermal expansion.
The following tables indicate the example expansion calculations with different temperature differences of products with different thermal expansion coefficients.
Thermal Expansion of Standard PP-R Pipes [mm] α = 0.150 mm/m°K
Temperature Differences (°C)

Pipe Length (m) 10°C 20°C 30°C 40°C 50°C 60°C 70°C 80°C
1,0 1,5 3,0 4,5 6,0 7,5 9,0 10,5 12,0
2,0 3,0 6,0 9,0 12,0 15,0 18,0 21,0 24,0
3,0 4,5 9,0 13,5 18,0 22,5 27,0 31,5 36,0
4,0 6,0 12,0 18,0 24,0 30,0 36,0 42,0 48,0
5,0 7,5 15,0 22,5 30,0 37,5 45,0 52,5 60,0
6,0 9,0 18,0 27,0 36,0 45,0 54,0 63,0 72,0
7,0 10,5 21,0 31,5 42,0 52,5 63,0 73,5 84,0
8,0 12,0 24,0 36,0 48,0 60,0 72,0 84,0 96,0
9,0 13,5 27,0 40,5 54,0 67,5 81,0 94,5 108,0
10,0 15,0 30,0 45,0 60,0 75,0 90,0 105,0 120,0
Thermal Expansion of Glass Fiber Reinforced (Faser) PP-R Pipes [mm] α = 0.035 mm/m°K
1,0 0,4 0,7 1,1 1,4 1,8 2,1 2,5 2,8
2,0 0,7 1,4 2,1 2,8 3,5 4,2 4,9 5,6
3,0 1,1 2,1 3,2 4,2 5,3 6,3 7,4 8,4
4,0 1,4 2,8 4,2 5,6 7,0 8,4 9,8 11,2
5,0 1,8 3,5 5,3 7,0 8,8 10,5 12,3 14,0
6,0 2,1 4,2 6,3 8,4 10,5 12,6 14,7 16,8
7,0 2,5 4,9 7,4 9,8 12,3 14,7 17,2 19,6
8,0 2,8 5,6 8,4 11,2 14,0 16,8 19,6 22,4
9,0 3,2 6,3 9,5 12,6 15,8 18,9 22,1 25,2
10,0 3,5 7,0 10,5 14,0 17,5 21,0 24,5 28,0
Thermal Expansion of Aluminum Foil PP-R Pipes [mm] α = 0.030 mm/m°K

1,0 0,3 0,6 0,9 1,2 1,5 1,8 2,1 2,4
2,0 0,6 1,2 1,8 2,4 3,0 3,6 4,2 4,8
3,0 0,9 1,8 2,7 3,6 4,5 5,4 6,3 7,2
4,0 1,2 2,4 3,6 4,8 6,0 7,2 8,4 9,6
5,0 1,5 3,0 4,5 6,0 7,5 9,0 10,5 12,0
6,0 1,8 3,6 5,4 7,2 9,0 10,8 12,6 14,4
7,0 2,1 4,2 6,3 8,4 10,5 12,6 14,7 16,8
8,0 2,4 4,8 7,2 9,6 12,0 14,4 16,8 19,2
9,0 2,7 5,4 8,1 10,8 13,5 16,2 18,9 21,6
10,0 3,0 6,0 9,0 12,0 15,0 18,0 21,0 24,0
Installation
Thermal Elongation Compensation The adjustments of thermal expansion compensation are
generally calculated as uniaxial (along the pipe). To avoid any
All piping systems need adequate gap for thermal expansion. additional stress in the system, PP-R pipes should freely expand
The necessary gaps should be created on the system through in the axial direction.
thermal expansion compensation so that no extra tension is Safety gap specified as 150 mm should be increased if there are
created on the system due to temperature differences and the temperature difference fluctuations in the system.
system is not damaged. In the vertical lines (riser), thermal
expansion compensation is not required. However, in the If the system is biaxial (horizontal and vertical) and longer than
horizontal lines, thermal expansion compensations should be 5 m, thermal expansions should be calculated and the following
included into the system by using the following calculations and expansion cycles should be used.
designs.
Uzama Çevriminin Genişliği
Free Expansion
Fixed Points (FP) blocks the undesired movements of the

system. These fixed points are created by using fasteners. Fixed
points should be more resistant and stable than sliding points
(SP). It is not recommended to use fixed points at bending areas.
Thermal expansion compensation can be calculated according

to the following formula by taking the free movements into
consideration:
Amin= 2 × ∆L+SD
Amin; Minimum thermal expansion compensation width (mm) SF; Fixed Point
SD; Safety gap (150 mm) SP; Sliding Point
∆L; Total elongation of the system from fixed point (mm) LDN; Length of free bending part (mm)
d; External diameter of pipe (mm)
L; Length of pipe
Thermal expansion direction ∆L; Total thermal expansion (or contraction) (mm)
L; Pipe Length (m)
K; Material constant (K=30)
Free expansion
Distances Between Clamps in PP-R Installation:
Temperature
Difference Clamp Distances (cm)
ΔT (°C) d20 d25 d32 d40 d50 d63 d75 d90 d110 d125 d160
Standard PP-R Pipes
0 85 105 125 140 165 190 205 220 250 270 290
20 60 75 90 100 120 140 150 160 180 200 230
30 60 75 90 100 120 140 150 160 180 200 230
40 60 70 80 90 110 130 140 150 170 180 200
50 60 70 80 90 110 130 140 150 170 180 200
60 55 65 75 85 100 115 125 140 160 170 180
70 50 60 75 80 95 105 115 125 140 155 180
84
Installation
Temperature
ΔT (°C) d20 d25 d32 d40 d50 d63 d75 d90 d110 d125 d160
Glass Reinforced PP-R
0 115 130 150 165 185 215 240 260 280 300 320
20 90 100 115 130 145 165 185 200 215 225 250
30 90 100 115 130 145 165 185 200 210 235 255
40 80 90 105 120 135 155 175 190 200 215 230
50 80 90 105 120 135 155 175 190 180 200 210
60 70 80 100 115 130 145 165 180 175 190 200
70 65 75 90 105 120 135 155 175 175 190 200
Temperature
ΔT (°C) d20 d25 d32 d40 d50 d63 d75 d90 d110 d125 d160
Aluminum Foil Pipes
0 120 140 160 180 205 230 245 260 280 300 320
20 90 105 120 135 155 175 185 200 215 225 250
30 90 105 120 135 155 175 185 200 210 235 255
40 85 95 110 125 145 165 175 190 200 215 230
50 85 95 110 125 145 165 175 190 180 200 210
60 80 90 105 120 135 155 165 180 175 190 200
70 70 80 95 110 130 145 165 175 175 190 200
PE-XA, PE-XB, PE-RT Piping Systems
Cut vertically. Enlarge and clean the hole Place the nut and ring.
1 2 3
Place the O-ring part.

Tighten the nut with a wrench.
Use undamaged O-rings.
4 5
1 2 3
1. PE-Xb pipes should be supported with 2. Edger legs could be added to each 3. After the tightness test, the system is
90°C edge turner. Edge turner compensates other and could be fixed to the floor. ready for cement finish.
the expansion of pipe and removes internal
stress. This prevents cracks that might result
in water leakage.
Utility Range
86
Corrugated
Piping Systems
GF Hakan Plastik Corrugated piping system is produced in two-layers from high density polyethylene (HDPE)
according to EN 13476-3 standard.
• Product range consists of 100 mm to 1000 mm pipes with or • Can be used in underground drainage systems and areas with
without socket and fittings intense traffic load
• Double layer structure increases the hardness of pipe. With its • Resistant to temperature changes and chemicals and suitable
specially designed frame structure, it is quite resistant to heavy soil for transfers of acidic liquids
and traffic loads • Flexible, suitable for easy use and installation
• Smooth internal surface prevents deposition of solid wastes. •Does not cause leaking and abrasion, demonstrates high
Offers superior hydraulic capacity resistance
Drainage Systems
- All underground and aboveground discharge systems
- Sewage systems
- Industrial waste water drainage systems
- Domestic waste water drainage systems
- Drainage and ground waters transfer lines
- Non-pressurized water transmission systems
- Discharge systems
- Rainwater discharge systems
Exhaust Gas Systems

- Used for transfer of waste gas in industrial areas
Chemical Transfer Systems

- Industrial areas (Short and long term use)
Rainwater Management Systems

- Used for blocking, retaining and filtering purposes
88
Diameters [mm] d100 mm - d1000 mm / Perforated d100 mm, d150 mm, d200
Ring Stiffness SN4 and SN8
Pipe Length [m] 7 m and 6 m
Jointing method Sealed Rubber gasket Push-fit
Color Outer layer: Black / Inner layer: Blue - SN4 Orange stripe, SN8 Blue stripe
Installation Temperature Minimum: -10°C Maximum: 35°C
Operating Temperature Minimum: -10°C Maximum: 35°C
Standard EN 13476-3
Approvals and Certificates Russia: GOST, Poland: REKOMENDACJA, Ukraine: SEPRO, Turkey: TSE
Corrugated
Corrugated Pipe with Internal Muff
Corrugated Pipe with Muff HDPE - SN4
HDPE - SN4
Dia. Leng. SN Code Dia. Leng. SN Code
[mm] [m] [mm] [m]
150 6 4 5210015002731 800 6 4 5210080000131

200 6 4 5210020002631 1000 6 4 5210090100131
300 6 4 5210030000131
400 6 4 5210040000131
500 6 4 5210050000131
600 6 4 5210060001231 Corrugated Pipe with Internal Muff
HDPE - SN8
Dia. Leng. SN Code
Corrugated Pipe with Muff HDPE - SN8 [mm] [m]
800 6 8 5210080000231
Dia. Leng. SN Code
[mm] [m] 1000 6 8 5210090100231
150 6 8 5210015000531
200 6 8 5210020000631
300 6 8 5210030000731
400 6 8 5210040000931 Perforated Corrugated Pipe without
500 6 8 5210050001031 Muff HDPE- SN4
600 6 8 5210060001031 Dia. Leng. SN Code
[mm] [m]
150 7 4 5210015000331
200 7 4 5210020000431
Corrugated Pipe without Muff HDPE - SN4
Dia. Leng. SN Code

[mm] [m]
150 6 4 5210015001231 Perforated Corrugated Pipe without

200 6 4 5210020001331 Muff HDPE - SN8
300 6 4 5210030001431
Dia. Leng. SN Code
400 6 4 5210040002431 [mm] [m]
500 6 4 5210050001831
100 7 8 5210010000931
600 6 4 5210060005331
150 7 8 5210015001131
800 6 4 5210080000631
200 7 8 5210020001131
1000 6 4 5210090100731
Corrugated Pipe without Muff HDPE - SN8
Dia. Leng. SN Code

[mm] [m] Telecommunication Pipe HDPE - SN8
100 6 8 5210010000231
Dia. SN Code
150 6 8 5210015001931 [mm]
200 6 8 5210020001931
100 8 7410011030031
300 6 8 5210030002031
400 6 8 5210040002231
500 6 8 5210050002131
600 6 8 5210060001931
800 6 8 5210080000331
1000 6 8 5210090100531
Corrugated Pipe Gasket Elbow 450
Dia. Code Packing Dia. Code

[mm] Type Pc [mm]
100 5410910010092 Parcel 1000 150 5310115000131
150 5410915010192 Parcel 1000 200 5310120000231
200 5410920010292 Parcel 300 300 5310130000431
300 5410930010491 Parcel 40 400 5310140000531
400 5410940010591 Parcel 20 500 5310150000631
500 5410950010691 Parcel 20
600 5410930010791 Parcel 15
800 5410980010892 Parcel -
1000 5410990110892 Parcel -
90
Corrugated
Elbow 90° Excentric Reducer
Dia. Code Dia. Code

[mm] [mm]
150 5310115000831 200x150 5310420000331

200 5310120000931 300x200 5310430000531
300 5310130001131 400x200 5310440000731
400 5310140001231 400x300 5310440000831
500 5310150001331 500x400 5310450000931
600x500 5310460001031
Branch with Corrugated Outlet 45°
Dia. Code Pipe Plug

[mm]
150x150 5310215000131 Dia. Code

200x150 5310220000231 [mm]
200x200 5310220000331 150 5310915000131

300x150 5310230000731 200 5310920000231
300x200 5310230000831 300 5310930000431
400x200 5310240001031 400 5310940000531
500x200 5310250001231 500 5310950000631
600x200 5310260001331 600 5310960000731
Socket
Tee Branch with Corrugated Outlet 90°
Dia. Code
Dia. Code [mm]
[mm]
150 5310515000131
150x150 5310215002431 200 5310520000231
200x150 5310220002531 300 5310530000431
200x200 5310220002631 400 5310540000531
300x150 5310230003031 500 5310550000631
300x200 5310230003131 600 5310560000731
400x150 5310240003331 800 5310580000832
400x200 5310240003431 1000 5310590100932
400x400 5310240003631
500x150 5310250003731
500x200 5310250003831
600x150 5310260004131
Telecommunicaion Pipe Socket
Dia. Code
[mm]
Branch with PVC Outlet 45° 100 7510511000131
Dia. Code
[mm]
150x160 5310215001531
200x160 5310220001631
PP 200x200 5110220001721
300x160 5310230001831
PP 300x200 5110230001921
PP 400x200 5110240002021
PP 500x200 5110250021721
Corrugated Support
Dia. Code Packing

[mm] Type Pc
100 (Single) 5110911020121 Parcel 140
100 (Double) 5
110911020021 Parcel 70
PVC-U Drainage
Piping Systems
GF Hakan Plastik Drainage Piping Systems are produced in two options as perforated and unperforated pipes
in accordance with TS 9128 standard.
• Removal of harmful waters in agricultural lands • Drainage of emergency lanes
• Foundation drainage of construction site • Railway drainage applications
• Reclamation of muddy and argilliferous lands • Irrigation infrastructure drainage applications
• Reclamation of highway shoulders • All drainage applications in airports, schools, hospitals, hotels,
• Removal of base water in the structures that have base water mass housing projects, golf courts and industrial buildings.
• Drainage of sports areas
Structure One Layered, perforated and unperforated
Diameters [mm] d100, d125, d160, d200
Pipe Length [m] 50 and 100 meters in the form of coil
Color Yellow
Approvals and Certificates Turkey: TSE
92
PVC-U Drainage
Drainage Pipe - Perforated
Dia. Code Packing

[mm] Type Meter
2205011000111 Coil 100
100
2205012500211 Coil 100
125
2205016000311 Coil
160 50
2205020000411 Coil
200 50
Drainage Pipe - Unperforated Drainage Branch 45°

[mm] Type Meter [mm] Type Pc
2205011001011 Coil 100
100 125-125 2305212502111 Bundle 2
2205012501111 Coil 100
125 160-160 2305216002211 Bundle 2
2205016001211 Coil
160 50 200-200 2305220002311 Bundle 2
2205020001311 Coil
200 50
Drainage Socket
Drainage Elbow 45°
Dia. Code Packing
[mm] Type Pc
Dia. Code Packing
[mm] Type Pc 2305511004011 Cartonbox 25
100
2305112500311 Bundle
125 2 2305512504111 Cartonbox 19
125
2305116000511 Bundle
160 2 2305516004211 Cartonbox 8
160
2305120000711 Bundle
200 2 2305520004311 Cartonbox 5
200
Drainage Branch 87,5°

Drainage Elbow 87,5°
Dia. Code Packing
Dia. Code Packing [mm] Type Pc
[mm] Type Pc
125-125 2305212502511 Bundle 2
2305112500411 Bundle
125 2 160-160 2305216002611 Bundle 2
2305116000611 Bundle
160 2 200-200 2305220002711 Bundle 2
2305120000811 Bag
200 2
Polyethylene
Piping Systems
Developed by GF Hakan Plastik to meet the increasing needs for PE pipes around the world, these piping systems are
mostly used in underground gas and water lines and stand out with their lightweight, easy and secure installation
characteristics.
They are produced in two types as high and low density for gas and water systems:
PE Piping Systems used for water transfer are classfied as

follows by the type of raw material used for production: PE Piping Systems used for gas transfer are classfied as follows
- PE 32 - Low Density Piping Systems by the type of raw material used for production:
- PE 100 - High Density Piping Systems - PE 80 - Medium Density Piping Systems
- PE 100 RC - High Density Piping Systems Resistant to Cracks - PE 100 - High Density Piping Systems
• Welding methods such as electrofusion, butt and socket can be jointed quickly and practically.
• Produced in accordance with TS EN 12201-2, TS EN 1555-2 standards.
Diameter Ranges [mm] d20 - d110 mm for PE 32
d20 - d400 mm for PE 80
d20 - d630 mm for PE 100
d200 - d500 mm for PE 100 RC
Pressure Classes PN6 and PN10 for PE 32 and PE 80
PN4 - PN5 - PN6 - PN8 - PN10 - PN12,5 - PN16 - PN20 - PN25 for PE 100 and PE 100 RC
Operating Temperature Range -40°C - 40°C
Connection Type Electrofusion Welding, Butt Welding, Socket Fusion Welding, Flanged Connection,
Mechanical Connection
Thermal Expansion Coefficient 0,18 mm/m°K
Approvals and Certificates Turkey: TSE, Germany: DVGW, HYGIENE, America: NSF, UK: WRAS, Russia: HYGIENE,
Bulgaria: NJN
• Pressurized drinking water network
• Waste water discharge and waste water
pumping lines
• Irrigation systems, undersea passage lines and
deep sea discharges
• Underground fire extinguishing systems
(Hydrant lines)
• Cooling water systems
• Telecommunication systems and mining
• Natural Gas Transport, LPG Systems
94
Polyethylene
Wall Thicknesses of Polyethylene Pipes according to (PE100) TS EN 12201-2 Standard
Dia. PN4 PN5 PN6 PN8 PN10 PN12,5 PN16 PN20 PN25
[mm] SDR41 SDR33 SDR26 SDR21 SDR17 SDR13,6 SDR11 SDR9 SDR7,4
20 - - - - - - 2 2,3 3
25 - - - - - 2 2,3 3 3,5
32 - - - - 2 2,4 3 3,6 4,4
40 - - - 2 2,4 3 3,7 4,5 5,5
50 - - 2 2,4 3 3,7 4,6 5,6 6,9
63 - - 2,5 3 3,8 4,7 5,8 7,1 8,6
75 - - 2,9 3,6 4,5 5,6 6,8 8,4 10,3
90 - - 3,5 4,3 5,4 6,7 8,2 10,1 12,3
110 - - 4,2 5,3 6,6 8,1 10 12,3 15,1
125 - - 4,8 6 7,4 9,2 11,4 14 17,1
140 - - 5,4 6,7 8,3 10,3 12,7 15,7 19,2
160 - - 6,2 7,7 9,5 11,8 14,6 17,9 21,9
180 - - 6,9 8,6 10,7 13,3 16,4 20,1 24,6
200 - - 7,7 9,6 11,9 14,7 18,2 22,4 27,4
225 - - 8,6 10,8 13,4 16,6 20,5 25,2 30,8
250 - - 9,6 11,9 14,8 18,4 22,7 27,9 34,2
280 - - 10,6 13,4 16,6 20,6 25,4 31,3 38,3
315 7,7 9,7 12,1 15 18,7 23,2 28,6 35,2 43,1
355 8,7 10,9 13,6 16,9 21,1 26,1 32,2 39,7 48,5
400 9,8 12,3 15,3 19,1 23,7 29,4 36,3 44,7 54,7
450 11 13,8 17,2 21,5 26,7 33,1 40,9 50,3 61,5
500 12,3 15,3 19,1 23,9 29,7 36,8 45,4 55,8 -
560 13,7 17,2 21,4 26,7 33,2 41,2 50,8 62,5 -
630 15,4 19,3 24,1 30 37,4 46,3 57,2 70,3 -
PE80 Low Density PE32 - 6 bar Low Density PE32 - 10 bar
Dia. SDR11 Dia. Code Packing Dia. Code Packing

[mm] [mm] Type (m) [mm] Type (m)
20 * 20 6806002000131 Coil 25 20 6806002002031 Coil 150
25 * 25 6806002500231 Coil 100 25 6806002502131 Coil 100
32 * 32 6806003200331 Coil 100 32 6806003202231 Coil 100
40 * 40 6806004000431 Coil 100 40 6806004002331 Coil 100
50 * 50 6806005000531 Coil 100 50 6806005002431 Coil 100
63 * 63 6806006300631 Coil 100 63 6806006302531 Coil 100
50 * 75 6806007500731 Coil 100 75 6806007502631 Coil 100
75 *
90 *
110 *
125 *
140 *
160 *
180 *
200 *
PVC-U
Pressurized Potable Water Piping Systems
Demonstrates excellent resistant to aggressive environments that occur as a result of both natural and
industrial operations.
• They are resistant to almost all chemical or electrochemical • Pipes with diameter d20-d110 mm are made as sement adhesion
corrosion types in the nature. socket while pipes with diameter d63-500 are made as rubber
• Adhesion and socket type connection options are available. gasket (Push-Fit) socket.
• Hygienic, does not cause bacteria and odor. • Fast and easy installation.
• Fire resistant, ensures safety in both domestic and industrial • Minimum maintenance costs.
installations. • Prevents residues thanks to its smooth and even internal surface.
• PVC-U pipes made of tasteless and odor-free material remain • Ensures additional safety when using in both domestic and
neutral and inert for all liquids transported. industrial power installations as they are fire resistant.
• They are produced in two types: • Produced in accordance with TS EN 1452-2 standards.
- Pipes with Solvent Cementing
- Pipes with Rubber Gasket (Push-Fit) Socket
• Pressurized water networks, supply of urban drinking water • Industrially-treated liquids and industrial waste discharge
• Pipelines for ventilation systems, swimming pool facilities • Network and cable system installation
• Transfer of acids, alkalis and harmful chemicals • Supply of water in agricultural irrigation and rural areas.
• Pumped waste water networks
Diameters [mm] d20 - d500 mm
Pressure Classes PN6 - PN8 - PN10 - PN12,5 - PN16 - PN20
Operating Temperature Range 0°C - 60°C
Connection Type Rubber gasket (Push-Fit) socket and solvent cementing
Color Black
Approvals and Certificates Turkey: TSE, Russia: GOST, Ukraine: SEPRO, HYGIENE
96
PVC Pressurized Potable Water Pipes
Nominal Pipe Ranges (S)

External Nominal wall thickness
Diameter
S20 S16 S12,5 S10 S8 S6,3 S5
(SDR 41) (SDR 33) (SDR 26) (SDR 21) (SDR 17) SDR (13,6) SDR (11)
Nominal pressures PN, determined based on service (design) coefficient as C=2,5
dn PN6 PN8 PN10 PN12,5 PN16 PN20
20 - - - - - 1,5 1,9
25 - - - - 1,5 1,9 2,3
32 - - 1,5 1,6 1,9 2,4 2,9
40 - 1,5 1,6 1,9 2,4 3 3,7
50 - 1,6 2,0 2,4 3 3,7 4,6
63 - 2,0 2,5 3 3,8 4,7 5,8
75 - 2,3 2,9 3,6 4,5 5,6 6,8
90 - 2,8 3,5 4,3 5,4 6,7 8,2
Nominal pressuresa, PN, determined based on service (design) coefficient as C=2,0
dn PN6 PN8 PN10 PN12.5 PN16 PN20 PN25
110 2,7 3,4 4,2 5,3 6,6 8,1 10,0
125 3,1 3,9 4,8 6,0 7,4 9,2 11,4
140 3,5 4,3 5,4 6,7 8,3 10,3 12,7
160 4 4,9 6,2 7,7 9,5 11,8 14,6
180 4,4 5,5 6,9 8,6 10,7 13,3 16,4
200 4,9 6,2 7,7 9,6 11,9 14,7 18,2
225 5,5 6,9 8,6 10,8 13,4 16,6 -
250 6,2 7,7 9,6 11,9 14,8 18,4 -
280 6,9 8,6 10,7 13,4 16,6 20,0 -
315 7,7 9,7 12,1 15,0 18,7 23,2 -
355 8,7 10,9 13,6 16,9 21,1 26,1 -
400 9,8 12,3 15,3 19,1 23,7 29,4 -
450 11 13,8 17,2 21,5 26,7 33,1 -
500 12,3 15,3 19,1 23,9 29,7 36,8 -
a
The upper pressure class, PN, should be selected to take total service (design) coefficient as 2,5 (instead of 2,0) for the pipes with nominal diameter
above 90 mm.
Note 1 - Nominal wall thicknesses comply with ISO 4065.
Not 2 - S20 ve S16 için PN 6 değerleri, tercih edilen sayı olarak 6,3 alınarak hesaplanır
PVC Pressurized Water Pipe Gasket
Dia. Code Packing

[mm] Type (m)
63 1710906300192 Parcel 600
75 1710907500292 Parcel 350
90 1710909000392 Parcel 250
110 1710911000492 Parcel 200
125 1710912500592 Parcel 200
140 1710914000692 Parcel 175
160 1710916000792 Bag 150
200 1710920000892 Parcel 250
225 1710922500992 Bag 75
250 1710925001092 Parcel 100
280 1710928001192 Parcel 50
315 1710931501292 Parcel 40
355 1710935501392 Parcel 30
450 1710940001492 Parcel 25
450 1710945001692 Parcel 10
500 1710950001592 Parcel 15
PVC-U
Deep Well Pipes and Fittings
Demonstrates excellent resistant to aggressive environments that occur as a result of both natural and
industrial operations.
• GF Hakan Plastik Deep Well and Drilling pipes are made in single • They are lighter and easier to apply than steel pipes
layer out of PVC-U material in accordance with TS 11794 standard • Cost-effective in terms of operational continuity
• Thanks to their special formulation, deep well pipes meet well • High resistance to impacts
pressures safely. Produced in two types as flat and filtered • Smooth and glossy surface
• Their special design prevents incrustation that causes clogging of • No corrosion, durable
filters • Practicality in workmanship and saving on installation time
• As buttress gears on the both ends of pipes are released once at
the same time, they ensure quick and easy assembly during the
installation of pipes, and as they have one center, they allow for
proper graveling and pump installation thanks to the equal gap
around them
Diameters [mm] d88 - d330
Pipe Length [mm] 2m-3m-4m
Jointing method Threaded
Color Light Grey
Installation Very easy to install as it is lightweight
Standard TS 11794
Approvals and Certificates Russia: GOST, Ukraine: SEPRO - HYGIENE, Turkey: TSE
Fields of Application Spur
• This is a type of pipe used for the wells drilled to extract Dia. Code
[mm]
underground waters
88 1900908801211
113 1900911301311
125 1900912501411
140 1900914001511
175 1900917501611
200 1900920001711
225 1900922501811
280 1900928001911
Reduction
Dia. Code
[mm]
88-113 1900408800111
113-125 1900411300211
125-140 1900412500311
140-175 1900414000411
175-200 1900417500511
200-225 1900420000611
225-280 1900422500711
98
Deep Well Pipes
Flat Type Deep Well Pipe / 0-100 m Depth (C3) Filter Type Deep Well Pipe / 0-100 m Depth (C3)
Dia. Leng. Code Packing Dia. Leng. Code Packing

[mm] [mm] Type Pc [mm] [mm] Type Pc
88 2000 1800008800111 Length 1 88 2000
1800008829011 Length 1
88 3000 1800008800211 Length 1 88 3000
1800008829111 Length 1
88 4000 1800008800311 Length 1 88 4000
1800008829211 Length 1
113 2000 1800011301011 Length 1 113 2000
1800011330011 Length 1
113 3000 1800011301111 Length 1 113 3000
1800011330111 Length 1
113 4000 1800011301211 Length 1 113 4000
1800011330211 Length 1
125 2000 1800012502011 Length 1 125 2000
1800012531011 Length 1
125 3000 1800012502111 Length 1 125 3000
1800012531111 Length 1
125 4000 1800012502211 Length 1 125 4000
1800012531211 Length 1
140 2000 1800014003011 Length 1 140 2000
1800014032011 Length 1
140 3000 1800014003111 Length 1 140 3000
1800014032111 Length 1
140 4000 1800014003211 Length 1 140 4000
1800014032211 Length 1
175 2000 1800017504011 Length 1 175 2000
1800017533011 Length 1
175 3000 1800017504111 Length 1 175 3000
1800017533111 Length 1
175 4000 1800017504211 Length 1 175 4000
1800017533211 Length 1
200 2000 1800020005011 Length 1 200 2000
1800020034011 Length 1
200 3000 1800020005111 Length 1 200 3000
1800020034111 Length 1
200 4000 1800020005211 Length 1 200 4000
1800020034211 Length 1
225 2000 1800022506011 Length 1 225 2000
1800022535011 Length 1
225 3000 1800022506111 Length 1 225 3000
1800022535111 Length 1
225 4000 1800022506211 Length 1 225 4000
1800022535211 Length 1
280 2000 1800028007011 Length 1 280 2000
1800028036011 Length 1
280 3000 1800028007111 Length 1 280 3000
1800028036111 Length 1
280 4000 1800028007211 Length 1 280 4000
1800028036211 Length 1
330 2000 1800033008111 Length 1 330 2000
1800033037011 Length 1
330 3000 1800033008211 Length 1 330 3000
1800033037111 Length 1
330 4000 1800033008311 Length 1 330 4000
1800033037211 Length 1
Flat Type Deep Well Pipe / 0-300 m Depth (C2) Filter Type Deep Well Pipe / 0-300 m Depth (C2)
Dia. Leng. Code Packing Dia. Leng. Code Packing

[mm] [mm] Type Pc [mm] [mm] Type Pc
88 2000 1800008800411 Length 1 88 1800008829311 Length 1
2000
88 3000 1800008800511 Length 1 88 1800008829411 Length 1
3000
88 4000 1800008800611 Length 1 88 1800008829511 Length 1
4000
113 2000 1800011301311 Length 1 1800011330311 Length 1
113 2000
113 3000 1800011301411 Length 1 1800011330411 Length 1
113 3000
113 4000 1800011301511 Length 1 1800011330511 Length 1
113 4000
125 2000 1800012502311 Length 1 1800012531311 Length 1
125 2000
125 3000 1800012502411 Length 1 1800012531411 Length 1
125 3000
125 4000 1800012502511 Length 1 1800012531511 Length 1
125 4000
140 2000 1800014003311 Length 1 1800014032311 Length 1
140 2000
140 3000 1800014003411 Length 1 1800014032411 Length 1
140 3000
140 4000 1800014003511 Length 1 1800014032511 Length 1
140 4000
175 2000 1800017504311 Length 1 1800017533311 Length 1
175 2000
175 3000 1800017504411 Length 1 1800017533411 Length 1
175 3000
175 4000 1800017504511 Length 1 1800017533511 Length 1
175 4000
200 2000 1800020005311 Length 1 1800020034311 Length 1
200 2000
200 3000 1800020005411 Length 1 1800020034411 Length 1
200 3000
200 4000 1800020005511 Length 1 1800020034511 Length 1
200 4000
225 2000 1800022506311 Length 1 1800022535311 Length 1
225 2000
225 3000 1800022506411 Length 1 1800022535411 Length 1
225 3000
225 4000 1800022506511 Length 1 1800022535511 Length 1
225 4000
280 2000 1800028007311 Length 1 1800028036311 Length 1
280 2000
280 3000 1800028007411 Length 1 1800028036411 Length 1
280 3000
280 4000 1800028007511 Length 1 1800028036511 Length 1
280 4000
330 2000 1800033008411 Length 1 1800033037311 Length 1
330 2000
330 3000 1800033008511 Length 1 1800033037411 Length 1
330 3000
330 4000 1800033008611 Length 1 1800033037511 Length 1
330 4000
Utility
Product Range
• Corrugated Pipes and Fittings
• Polyethylene Pipes and Fittings
• PVC-U Deep Well Pipes and Fittings
• PVC-U Pressurized Potable Water Piping Systems
• PVC-U Drainage Piping Systems
100
Installation
Corrugated
Pipes and Fittings
1. Corrugated Pipes and Fittings are produced as self socketed. 4. The final form of the ring should be in a way that the part looking
2. For easy installation, lubricating liquids (silicone-based liquid) like a dome stays outside.
should be applied on the sealed and socketed parts before jointing 5. Make sure that the pipes are equally aligned prior to installation.
process. Do not use mineral oils and chemicals such as liquid 6. Pipes are jointed in flat angle by pushing with the aid of a
soap etc. that might damage rings. construction equipment, with the small size pipes being placed
3. For sealed jointing, one side of the ring suitable for pipe diameter manually or by a lever and the big size pipes being fitted by placing
is placed into the second groove of the pipe. The other part is fitted a wooden support part to the end of the pipe.
into the slot manually or by using a jimmy.
Soil Surface
Upper Layer (Natural

Filling)
Sleeve Layer
Cushion Layer
Natural Layer
A : Cushion layer (When ground reclamation is required, a : 0.25xD

max 100 mm coarse grained material or concrete) b : 0.75xD
B : Trench width (D+400 mm) E : Upper layer (Min 500 mm)
C : Sleeve layer H1 : Distance between upper point of pipe and floor
D : Pipe diameter mm α : Bedding angle
c1 : Upper sleeve layer (Min 300 mm)
In underground applications where trench is drilled, the trench traffic and soil loads on the pipes will be partly transferred to the
should be filled by means of compacting in layers so that no weak filler and the pipes will continue to serve smoothly during their
areas are left around the pipes in order to use corrugated pipes lifetime. If they are not properly compacted, gaps will occur and
and fittings smoothly for long years. It is particularly important to the pipes will fail to transfer the load to the other forces, resulting
fill the base of the pipes with filler. If the filling process is carried in the risk of collapse.
out by compacting them properly according to the specifications,
102
Installation
Polyethylene
Pipes and Fittings
• The installation rules of the PE pipes should be in compliance • If the soil generated during excavation is suitable, there is no need
with ATV-A 127 and EN 805 standards. for bedding and the duct is filled. If the soil is not suitable (stony or
• Pipes should be protected against deformation during the wet), the height of the duct should be increased and bedding should be
application and the pipes damaged during transport - storage carried out on the base by using dry filler.
should never be used. • Bedding thickness should be minimum C1 = 100 mm + 1/10 DN. 95%
• There should be no accumulation of underground water or compacting should be ensured by using a compactor on the bedding
rainwater inside the duct. Otherwise, such water should be material.
discharged by using a pump. • Side fillers of pipes should be poured with C2 = 30 cm thickness
• It is suitable to use incohesive sands, gravels, mixed grained and 95% compacting should be ensured by a compactor. This process
sands and gravels as filler. should be carried out every 30 cm until it covers 30 cm above the pipe.
• Depth of duct may vary depending upon the weather conditions. • After it covers C3=30 cm on the pipe, filling process should be
It should be minimum 70-80 cm. completed by compacting it with the aid of a mid-power compactor.
Placement of the Pipe in the Duct
Jointing Methods of Polyethylene Pipes
Butt Welding Preparations for Butt Welding:
Before butt welding, special attention should be paid to the

Butt welders consist of 4 units:
following points and butt welding should not be initiated without
fulfilling these conditions.
1- Main Hydraulic Body: Ensures the fixed connection for the
a-The temperature of heating coil should be checked. It should be
purpose of welding polyethylene pipes or fittings.
ensured that the temperature is distributed homogeneously.
2- Hydraulic Board (Unit): Unit that ensures welding pressures
b-The surface of heating coil should be clean prior to welding.
required so that the welding surfaces have the suitable welding
c-Polyethylene pipes should be properly connected to the welder.
parameters and pressures.
There should be no axial run-out.
3-Trimming Unit: Relevant surfaces should be smooth for welding.
d-Surfaces should be smooth for welding process. Avoid hand
Trimming unit removes the residues on the butt surfaces through
contact on the trimmed surfaces.
its blades and makes the surfaces suitable for welding.
4-Heating Coil: Surfaces are heated with appropriate temperatures
so that they can adhere homogeneously, and the raw material is
melted according to the desired standards.
Installation
Application of Butt Welding:
Before starting the welding process, the environment should b-Wall height: It is the wall height that occurs as a result of
be protected against unsuitable weather conditions (extreme reclining between the heating plate and butt surfaces of the pipes
moisture, dust, temperature below +5°C). It is recommended to at P=0,15 N/mm² pressure and is calculated as 0,55 mm + (0,1
use welding tent in the environments below +5°C. x e) mm.
e= Pipe wall thickness [mm]
Wind, sunlight and moisture might cause improper heating in the c- Welding time depending upon the wall thickness: Apply the
welding area. This would negatively affect the welding quality. following table.
Welding operator should be well-trained and experienced. The d- Jointing time: Within 9 seconds after the completion of the
pipes to be welded being of the same type material, diameter and heating time and wall release process, heating coil is taken from
wall thickness is one of the most appropriate welding methods. the welder, and butt surfaces are jointed to each other at the
required pressure according to the standard data.
a- Welding temperature: The temperature of the heating coil e-Cooling time: Welding process is completed after waiting for
should be between 190 and 220°C. Welding times of the heating the walls to cool according to the standards.
coil should be applied according to the standards.
Welding Times of HDPE Pipes at 200C Ambient Temperature
Pipe Wall Thickness Welding Pressure 0,15 N / [mm]2 Heating Time Heating Iron Pipe Jointing Pressure Cooling
[mm] Wall Height [mm] 0,02 N /mm2 [s] Release time [sn] Operating Time [s] Time [m]
..... 4,5 0,5 ..... 45 ..... 5 .....5 6
4,5 ..... 7 1.0 45.....70 5 ..... 6 5 ..... 6 6.....10
7 ..... 12 1,5 70 ..... 120 6 ..... 8 6 ..... 8 10.....16
12 ..... 19 2,0 120 ..... 190 8 ..... 10 8 ..... 11 16.....24
19 ..... 26 2,5 190 ..... 260 10 ..... 12 11 ..... 14 24.....32
26 ..... 37 3,0 260 ..... 370 12 ..... 16 14 ..... 19 32.....45
37 ..... 50 3,5 370 ..... 500 16 ..... 20 19 ..... 25 45.....60
50 ..... 70 4,0 500 ..... 700 20 ..... 25 25 ..... 35 60.....80
Electrofusion Welding
Polyethylene
Uncontrolled
1. Cutting the Pipes:
Melting
Pipes should be cut vertically to their own axis.

For cutting process, PE pipe cutter or a saw
suitable to cut plastics can be used.
Cutting the pipes improperly results in the metal

windings in the sleeve not contacting the pipes in
certain areas. This might cause overheating and
uncontrolled flow of the melted material.
104
Installation
2. Marking the Welding Area 4. Scraping the Pipe Surface
Welding area can be

described as the depth in Before welding, shave the pipe with
which the pipe will be fitted a scrapper to remove the oxidized
into the sleeve. Measure the layer on the surface.
length of sleeve and calculate
the half Length of it.
1 1
To remove the oxidized layer completely,

it should be scraped in a way that the
Mark the half length of
marking on the pipe is removed and chips
sleeve by + 10 mm on
pipe.
occur. Pay special attention to ensure that
the scraped pipe is protected from dirt
and undesired weather conditions. Chips that may occur
2 on the pipe end should be removed by a scraper and edges
should be rounded.
3. Checking the Ovality 5. Cleaning the Welding Area
Any possible ovality

on PE pipes should be Unpack the sleeve and check it is
absolutely checked. not damaged. Avoid contacting the
Check it at several welding area of sleeve with dirty or
points of pipes. oily hands.
1 1
If ovality exists on the Isopropyl alcohol could be

pipe, use ovality clamp. used as cleaning substance.
(Alcohol content should not
be less than 96% by volume).
2 2
After fitting the ovality Use the cleaning substance by pouring it

clamp, check the on a absorbing cloth that does not leave
ovality of pipe again, any particles. Cleaned surfaces should
and if necessary, re- be protected from dirt and undesired
position the clamp. weather conditions.
3 3
Installation
6. Placing the Pipe into Sleeve:
Place the sleeve in a way that it will

encircle the marked area of pipe. The
marked area should easily fit into the
sleeve. If necessary, re-scrap the pipe.
1 2
While placing the pipe into the sleeve, ensure that the contact terminals of sleeve stay on
top. Pipes should not be exposed to bending tension and should easily bear their own weight
inside the sleeve. Free ends of pipes could be supported.
Likewise, prepare the other pipe end. Make sure that the pipe and sleeve are at the same
axis. Check the gap between pipe and sleeve along the surrounding of the pipe. If there are
local gaps, disperse the ovality with wooden parts (maximum 3 cm long) and ensure that
the gaps are equal around the entire pipe. Measure the gaps. If gaps are shorter than 2 mm,
proceed with electrofusion welding.
7. Electrofusion Welding:
If you have precisely followed the installation instructions step by scanner or manually. Check the details on the welder screen
step and there are no problems, welding process could be carried and on the barcode. Start the welding process. Upon completion,
out by an universal EF welder. Place the socket ends of the welder always wait as much as cooling period. Do not move the welded
into the contact terminals of the sleeve. Welding details are area during this period of time.
indicated on the barcode label on GF sleeve. Enter the welding
details into the welder automatically with the aid of a barcode
If any errors occur

during welding, melted If welding is
PE material might interrupted for any
splash around. So, for reasons (power supply
safety reasons, keep etc), cooling times
away for at least 1 m of the welded part
during welding. are indicated on the
barcode labels.
1 2
106
Installation
Flanged Jointing Methods of HDPE Pipes

Flanged jointing method generally allows for detachable The two pipelines that will be jointed with flange are taken together
connection of polyethylene pipes or polyethylene fittings. It also and after fitting a leakproof gasket between the two sides, flanges
allows for the connection of necessary system materials such are connected by using bolts and nuts. The significant point is to
as valve-vacuum lifter-hydrant etc. to polyethylene pipes and tighten the bolts by mutual sequence not by circular sequence.
fittings. After attaching the flange, a steel round connection While tightening the bolts, it is important not to draw the pipelines
component with bolt slots drilled on it, to the PE pipeline, PE part in terms of extreme overloads.
that will hold the steel round piece on the end and that is called
flange adaptor on the end of the pipeline is welded by the butt
welding method.
Flanged Jointing method Steel Flange

Gasket
Flange Adaptor
Stud Bolt + Nut
HDPE Pipe
Jointing with EF
Sleeve
Jointing
with Butt
Welding
Jointing with Coupling Adaptor

After cutting the pipes that will be jointed vertically to their
axis, bevelling is applied to the pipe ends at approximately 15°
angle, and the pipe is rotated and pushed up to the protrusion Method of Jointing with Coupling Adaptor
inside the coupling.
- After placing the both pipes properly, nuts are manually

tightened and connection is completed. Pipe Holder
- If the diameter of pipe is equal to or above 40 mm, it would O-Ring
be more appropriate to tighten the nuts by special wrench not Nut
manually.
- Coupling adaptors are resistant to 16 bars pressure.
However, it is not recommended for the pipes with diameter
above 110 mm.
Installation
Deep Well Cross-Section
PVC-U
Deep Well Pipes and Fittings
• For the storage of pipes, measures should be taken and pipes
should be protected against direct sunlight.
• Prior to installation and during the loading and transport of pipes,
they should not be hit on the floor and special attention should be
paid to not damage the pipe end threads. The protective part on the
end of the pipes should not be removed until they are taken down to
the well.
• Vertical shaft pumps or parts to be used for pump connection
should not be settled down on the pipes.
• It would be sufficient to use water and soap for the installation
of pipes (During the jointing process, do not apply bonding and
lubricating chemicals to avoid any damages on the threads).
• For the installation of pipes, use suitable materials that will not
cause damage on pipes.
• To place the pipes vertically in the well, use centering spring
every 8 m. Pay special attention to make sure that particularly the
undermost closed pipe has one spring.
• If the pipe is stuck in the well, it should not be piled. It should be
taken back and let down again. If the pipe does not go down, the well
should be dredged by a driller and then, the pipe should be taken
down the well.
• After the pipe contacts the base of the well, take it at least 10 cm
above and keep the pipe suspended until graveling is completed so
that the pipe stays vertically.
PVC-U
Pressurized Potable Water
Piping Systems
Connection of Push-Fit Pipes with Socket:
• Gasket is used for the jointing of Push-Fit PVC-U Pressurized

potable Water Pipes.
• While placing the gasket, the groove of socket should be
properly cleaned and attention should be paid to the direction
of gasket.
• Solution is applied to the end of the pipe as a lubricating
material. Pipe end is pushed into the socket in a way that will
not slide the gasket. You should push up to the end of the push-
fit distance inside the two pipes at the jointing point.
• Avoid extreme pressure and deflection during the installation
of pipes.
108
Installation
Connection of Solvent Cement Pipes with Socket:

• First of all, remove all dusts, oils, stains and burrs by using • After applying the adhesive appropriately, do not wait and
cleaning liquid in the points that will be adhered to each other. immediately push the parts into each other without rotating them.
• Adhesion area is marked by the length of socket. • Remove the adhesive residues that come out after pushing the
• Grind the adhesion areas on the both parts appropriately. parts into each other.
After grinding, wipe and dry the adhesion areas again by using
cleaning liquid.
• Apply the adhesive longitudinally on the adhesion points of the
both parts by using a clean brush.
1 2 3 4
5 6 7 8
9 10 11 12
PVC-U Drainage
Piping Systems
• Pipes should be protected against sunlight during storage as
they do not contain UV additives.
• Pipes taken to the installation site in the form of coils are Soil Trench
spread on the soil area excavated depending upon the condition
of soil and ground. Gravel
• Cover the pipes with appropriate soil embankment in a way

that does not close the holes on the pipes. 4” Bored Perforated Drainage Pipe
• Does not require trained personnel and troublesome

workmanship as it is very easy to install.
Packaging,
Storage and
Transportation
110
Packaging
GF Hakan Plastik pipes and fittings are packed as ready for
transport in a customer-friendly way. Packing ensures safety,
efficient storage and easy transport.
Waste water pipes are shipped
on wooden frames or pallets
according to the demands of
customers.
CORRECT
WRONG
Pipes and fittings with socket are placed in a way that they will Short parts with the length of 150, 250 and 500 mm are packed in
not stay on top of each other. carton boxes like connection parts.
Pipes are packed by plastic clamps to hold them together. Stretch All product ranges are identified in the Warehouse Management System
film is applied to protect pipes from pipes dust and stains. (WMS) by barcode label. Barcode system ensures management of
products and prevents complexity and errors during storage and loading.
Storage
Pipes packed in the factory might be stacked on wooden frames.

Appropriate materials such as pallet etc. should be used to
prevent any damage on the socket parts of the pipes stored for
a long time. This also makes it easier to lift the pipes by from the
flor.
Method of storage should not cause any outflow and should

not damage the pipes. As long as they are stored properly, no
permanent deformations or damages will occur on the pipes and
fittings. Pipes should not be stacked above 1,5 m. Pipes should be
safe against sliding. WRONG
Products that are not resistant to UV

should not be stored outdoors and
should be protected against sunlight.
Pipes and fittings packed in carton boxes should be protected

against moisture.
Carton boxes should be sealed and stored in a dry area.
112
Transportation
Pipes should be carefully transported to prevent any damages.

Avoid sudden and hard pressures on pipes and fittings that might
cause freezing in cold weather conditions. Ensure that pipes are
not slided and dropped on the floor. Loading and unloading and
packing of pipes in a block should be carried out by means of
forklifts having flat threads and extensions.
Technical
Tables
• Temperature, Pressure and Service Life Tables
114
Temperature, Pressure and Service Life Tables
According to EN 15874 - 75 Standard: According to DIN 8077 Standard:

Application Class (Class) 1: Hot Water Distribution 60°C Maximum Operating Pressures according to
DIN 8077 with safety factor of 1,5
Operating Temperature 49 years at 60°C
Maximum Operating Temperature 1 year at 80°C Operating Service PP-R PP-RCT
Tempera- Life
Degradation Temperature 100 hours at 95°C
ture(°C) (year) SDR 11 SDR 7.4 SDR 6 SDR9 SDR7.4
Maximum Operating Pressure 10 bars (S5) (S3.2) (S2.5) (S4) (S3.2)
1 17,6 27,8 35 24 30,2
5 16,7 26,3 33,2 23,2 29,3
Application Class (Class) 2: Hot Water Distribution 70°C
10 °C* 10 16,1 25,6 32,1 22,9 28,9
Operating Temperature 49 years at 70°C
25 15,6 24,8 31,1 22,5 28,4
Maximum Operating Temperature 1 year at 80°C 50 15,2 24,1 30,3 22,2 28
Degradation Temperature 100 hours at 95°C 1 15 23,8 30 20,9 26,3
Maximum Operating Pressure 10 bars 5 14,1 22,3 28,2 20,2 25,4
20 °C* 10 13,7 21,8 27,3 19,9 25,1
25 13,3 21 26,5 19,6 24,6
Application Class (Class) 4: Underfloor Heating and
Radiators at Low Temperatures 50 12,9 20,4 25,8 19,3 24,3
1 12,8 20,2 25,5 18,1 22,7
20°C for 2,5 years
5 12 18,9 23,9 17,4 22
Operating Temperature 40°C for the subsequent 20 years
30 °C 10 11,6 18,4 23,1 17,2 21,7
60°C for the subsequent 20 years 25 11,2 17,8 22,3 16,9 21,2
Maximum Operating Temperature 2,5 years at 70°C 50 10,9 17,3 21,8 16,6 20,9
Degradation Temperature 100 hours at 100°C 1 10,8 17,2 21,5 15,5 19,6
5 10,1 16 20,2 15 18,9
Maximum Operating Pressure 10 bars
40 °C 10 9,8 15,6 19,7 14,7 18,6
25 9,4 15 18,8 14,4 18,2
Application Class (Class) 5: Radiators at High Temperatures 50 9,2 14,5 18,3 14,2 17,9
20°C for 14 years, 1 9,2 14,5 18,3 13,3 16,7
Operating Temperature 60°C for the subsequent 25 years 5 8,5 13,5 17 12,8 16,1
80°C for the subsequent 10 years 50 °C 10 8,3 13,1 16,4 12,6 15,8
Maximum Operating Temperature 1 year at 90°C 25 8 12,6 15,9 12,3 15,5
Degradation Temperature 100 hours at 100°C 50 7,8 12,3 15,4 12,1 15,2
Maximum Operating Pressure 10 bars 1 7,8 12,3 15,4 11,2 14,2
5 7,2 11,3 14,3 10,8 13,6
60 °C 10 6,9 11 13,8 10,6 13,4
Standard PP-R Pipes: 25 6,7 10,6 13,3 10,4 13,1
SDR 11/S5.0 (PN10) class 1/6 bar class 2/4 bar 50 6,4 10,3 12,8 10,2 12,8
SDR 7.4/S3.2 (PN16) class 1/8 bar class 2/6 bar class 4/10 bar
class 5/6 bar 1 6,5 10,3 13 9,4 11,9
SDR 6/S2.5 (PN20) class 1/10 bar class 2/8 bar class 4/10 bar 5 6 9,5 11,9 9,1 11,4
class 5/6 bar
70 °C 10 5,8 9,3 11,7 8,9 11,2
Glass Fiber Reinforced PP-R Pipes: 25 5,1 8 10,1 8,7 10,9
SDR 11/S5.0 (PN10) class 1/6 bar class 2/4 bar
SDR 7.4/S3.2 (PN20) class 1/8 bar class 2/6 bar class 4/10 bar 50 4,3 6,8 8,5 8,5 10,7
class 5/6 bar 1 5,4 8,6 10,9 7,9 9,9
SDR 6/S2.5 (PN25) class 1/10 bar class 2/8 bar class 4/10 bar
class 5/6 bar 5 4,8 7,6 9,6 7,5 9,5
80 °C
10 4 6,4 8 7,4 9,3
Aluplus Stable Pipes:
SDR6/S2.5 (PN20) class 1/6 bar 25 3,2 5,2 6,3 7,2 9,1
1 3,8 6,1 7,7 5,9 7,4
Stable Pipes:
SDR6/S2.5 (PN25) class 1/10 bar class 2/8 bar class 4/10 bar 95 °C 5 2,5 4,1 5,1 5,6 7,1
class 5/6 bar 10 2,2 3,4 4,3 5,5 6,9
PE-RT, PE-XB Pipes: * Cold water applications.

Class 1-2-4/10 bar class 5/8bar
Glass Reinfoced PP-RCT Pipes:

SDR7,4 class 1/10 bar class 2/10 bar class 4/10 bar
class 5/8 bar
SDR9 class 1/8 bar class 2/8 bar class 4/8 bar
class 5/6 bar
Technical
Tables
• Chemical Resistance Tables
116
Chemical Resistance Tables ++ Resistant
+ Limited Resistance
O Contact GF Hakan Plastik
- Not Resistant
2-Chloroethanol Fluid Temperatures PE O -

20 °C 40 °C 60 °C 80 °C PP -
PVC-U -
PE ++ + O Acrylic acid methylester Fluid Temperatures
PP ++ + O - 20 °C 40 °C 60 °C 80 °C
PVC-U -
Acetaldehyde Fluid Temperatures PE O -
20 °C 40 °C 60 °C 80 °C PP O -
PVC-U -
PE ++ O - Acrylonitrile Fluid Temperatures
PP O - 20 °C 40 °C 60 °C 80 °C
PVC-U -
Acetaldehyde, 0-40% aqueous Fluid Temperatures PE ++ ++ ++ -
solution PP ++ O O -
20 °C 40 °C 60 °C 80 °C
PVC-U - Adipic acid, aqueous, saturated Fluid Temperatures
PE ++ O - solution
PP ++ O O - 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ -
Acetic acid, > 80 % aqueous solution Fluid Temperatures PE ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PP ++ ++ ++ ++
PVC-U O O -
PE + O - Allyl alcohol, 96% solution Fluid Temperatures
PP O O - 20 °C 40 °C 60 °C 80 °C
PVC-U O -
Acetic acid, >10-50 % aqueous Fluid Temperatures PE ++ ++ O -
solution PP O O -
20 °C 40 °C 60 °C 80 °C
PVC-U + + + - Aluminium salts, aqueous, saturated Fluid Temperatures
PE + + O - solutions
PP + + O O 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ -
Acetic acid, >50-60 % aqueous Fluid Temperatures PE ++ ++ ++ -
solution PP ++ ++ ++ ++
20 °C 40 °C 60 °C 80 °C
PVC-U + O O - Ammonia, gaseous, dry / wet Fluid Temperatures
PE + + O - 20 °C 40 °C 60 °C 80 °C
PP + + O O PVC-U ++ ++ ++ -
PE ++ ++ ++ -
Acetic acid, >60-80 % aqueous Fluid Temperatures PP ++ ++ ++ O
solution
20 °C 40 °C 60 °C 80 °C
Ammonium Acetate, aqueous
PVC-U + O O - Fluid Temperatures
solutions
PE + + O - 20 °C 40 °C 60 °C 80 °C
PP + + O O PVC-U ++ ++ ++ -
PE ++ ++ ++ -
Acetic acid, 0-10 % aqueous solution Fluid Temperatures PP ++ ++ ++ ++
20 °C 40 °C 60 °C 80 °C
PVC-U + + + - Ammonium hydroxide, aqueous Fluid Temperatures
PE + + O - 20 °C 40 °C 60 °C 80 °C
PP + + O O PVC-U ++ ++ ++ -
PE ++ ++ ++ -
Acetic acid anhydride Fluid Temperatures PP ++ ++ ++ O
20 °C 40 °C 60 °C 80 °C
PVC-U - Ammonium salts, various concentra-
Fluid Temperatures
PE ++ O - tions, aqueous solutions
PP ++ O - 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ -
Acetone Fluid Temperatures PE ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PP ++ ++ ++ ++
PVC-U -
PE ++ ++ O - Amyl acetate Fluid Temperatures
PP ++ ++ ++ O 20 °C 40 °C 60 °C 80 °C
PVC-U -
Acetone, up to 10 % aqueous solution Fluid Temperatures PE ++ O -
20 °C 40 °C 60 °C 80 °C PP O -
PVC-U -
PE ++ ++ ++ - Amyl alcohol Fluid Temperatures
PP ++ ++ ++ O 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O -
Acetonitrile Fluid Temperatures PE ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PP ++ ++ ++ O
PVC-U -
PE O - Aniline Fluid Temperatures
PP O - 20 °C 40 °C 60 °C 80 °C
PVC-U -
Acetophenone Fluid Temperatures PE ++ O O -
20 °C 40 °C 60 °C 80 °C PP ++ ++ O -
PVC-U -
PE O - Antimony trichloride, 0-80 % aqueous
Fluid Temperatures
PP O - solutions
20 °C 40 °C 60 °C 80 °C
Acrylic acid ethylester Fluid Temperatures PVC-U ++ ++ O -
20 °C 40 °C 60 °C 80 °C PE ++ ++ ++ -
PVC-U - PP ++ ++ ++ O
Chemical Resistance
PE -
Aqua regia Fluid Temperatures PP -
20 °C 40 °C 60 °C 80 °C
PVC-U O - Butadiene, gaseous Fluid Temperatures
PE - 20 °C 40 °C 60 °C 80 °C
PP - PVC-U ++ O -
PE O -
Arsenic acid, 80% aqueous solutions Fluid Temperatures PP O -
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O - Butane, gaseous Fluid Temperatures
PE ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PP ++ ++ ++ ++ PVC-U ++ ++ O -
PE ++ ++ O -
Barium salts, aqueous, saturated PP ++ ++ O -
Fluid Temperatures
solutions
20 °C 40 °C 60 °C 80 °C Butanediol-1,4, Fluid Temperatures
PVC-U ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ - PVC-U O -
PP ++ ++ ++ ++ PE ++ ++ ++ -
PP ++ ++ ++ O
Beer Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Butanediol-1,4, technically pure Fluid Temperatures
PVC-U ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ - PVC-U ++ ++ O
PP ++ ++ ++ ++ PE ++ ++ O
PP ++ ++ O
Benzaldehyde Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Butanol Fluid Temperatures
PVC-U - 20 °C 40 °C 60 °C 80 °C
PE ++ O - PVC-U ++ ++ O -
PP ++ O - PE ++ ++ O -
PP ++ ++ O -
Benzene Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Butyl acetate Fluid Temperatures
PVC-U - 20 °C 40 °C 60 °C 80 °C
PE - PVC-U -
PP - PE + O -
PP O -
Benzene sulfonic acid Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Butyl phenol, p-tertiary Fluid Temperatures
PVC-U ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ O - PVC-U O -
PP ++ ++ O - PE O -
PP O -
Benzoic acid, aqueous solutions Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Cadmium salts, aqueous solutions Fluid Temperatures
PVC-U ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ - PVC-U ++ ++ ++ -
PP ++ ++ ++ ++ PE ++ ++ ++ -
PP ++ ++ ++ O
Benzyl alcohol Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Caesium salts, aqueous solutions Fluid Temperatures
PVC-U O - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ O - PVC-U ++ ++ ++ -
PP ++ ++ O - PE ++ ++ ++ -
PP ++ ++ ++ ++
Beryllium salts, aqueous solutions Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Calcium hydroxide, aqueous solution Fluid Temperatures
PVC-U ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ - PVC-U ++ ++ ++ -
PP ++ ++ ++ ++ PE ++ ++ ++ -
PP ++ ++ ++ ++
Boric acid, aqueous solutions Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Calcium salts, aqueous solutions Fluid Temperatures
PVC-U ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ - PVC-U ++ ++ ++ -
PP ++ ++ ++ ++ PE ++ ++ ++ -
PP ++ ++ ++ ++
Brine Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Carbon dioxide, gaseous, anhydrous Fluid Temperatures
PVC-U ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ - PVC-U ++ ++ ++ -
PP ++ ++ ++ ++ PE ++ ++ ++ -
PP ++ ++ ++ ++
Bromine water, aqueous solution Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Carbon tetrachloride Fluid Temperatures
PVC-U O O - 20 °C 40 °C 60 °C 80 °C
PE - PVC-U -
PP - PE -
PP -
Bromine, pure, liquid or gaseous,
Fluid Temperatures
dry and wet
20 °C 40 °C 60 °C 80 °C
PVC-U -
118
Chemical Resistance
Carbonic acid, CO2 in H2O Fluid Temperatures Chromic Acid, >=10-30 %, aqueous
Fluid Temperatures
20 °C 40 °C 60 °C 80 °C solutions
PVC-U ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ - PVC-U + + -
PP ++ ++ ++ ++ PE -
PP -
Chloric acid, >10-20% aqueous

Fluid Temperatures
solution Chromium (II) -salts, aqueous,
Fluid Temperatures
20 °C 40 °C 60 °C 80 °C saturated solutions
PVC-U ++ O - 20 °C 40 °C 60 °C 80 °C
PE O - PVC-U ++ ++ ++ -
PP O - PE ++ ++ O -
PP ++ ++ O -
Chloric acid, 0-10 % aqueous solution Fluid Temperatures

20 °C 40 °C 60 °C 80 °C Citric acid, aqueous solutions Fluid Temperatures
PVC-U ++ O - 20 °C 40 °C 60 °C 80 °C
PE O - PVC-U ++ ++ ++ -
PP O - PE ++ ++ ++ -
PP ++ ++ ++ ++
Chlorine, gaseous, dry, pure Fluid Temperatures

20 °C 40 °C 60 °C 80 °C Compressed air, containing oil Fluid Temperatures
PVC-U O O - 20 °C 40 °C 60 °C 80 °C
PE - PVC-U -
PP - PE O O O -
PP O O O -
Chlorine, gaseous, wet Fluid Temperatures

20 °C 40 °C 60 °C 80 °C Copper I/II salts, aqueous solutions Fluid Temperatures
PVC-U O O - 20 °C 40 °C 60 °C 80 °C
PE - PVC-U ++ ++ ++ -
PP - PE ++ ++ O -
PP ++ ++ ++ O
Chlorine water, <= 2 ppm Chlorine Fluid Temperatures

20 °C 40 °C 60 °C 80 °C Crotonaldehyde Fluid Temperatures
PVC-U ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ O - PVC-U -
PP ++ ++ ++ O PE ++ O O -
PP ++ O - -
Chlorine water, saturated solution Fluid Temperatures

20 °C 40 °C 60 °C 80 °C Cyclohexane Fluid Temperatures
PVC-U ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PE - PVC-U ++ O -
PP - PE ++ O -
PP ++ O -
Chloroacetic acid, 100 % Fluid Temperatures

20 °C 40 °C 60 °C 80 °C Cyclohexanol Fluid Temperatures
PVC-U O O - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ O - PVC-U ++ ++ O -
PP ++ ++ O - PE ++ ++ O -
PP ++ ++ O -
Chloroacetic acid, 50 % aqueous

Fluid Temperatures
solution Cyclohexanone Fluid Temperatures
20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U ++ O O - PVC-U -
PE ++ ++ O - PE ++ O -
PP ++ ++ ++ O PP O O -
Chlorobenzene Fluid Temperatures Dextrine, aqueous solutions Fluid Temperatures

20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U - PVC-U ++ ++ ++ -
PE O - PE ++ ++ ++ -
PP O - PP ++ ++ ++ O
Chlorosulfonic acid Fluid Temperatures Dibrombenzene Fluid Temperatures

20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U O - PVC-U -
PE - PE -
PP - PP -
Chromic acid, <10 % aqueous Dibutyl ether Fluid Temperatures

Fluid Temperatures
solution 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U -
PVC-U + + - PE O O -
PE - PP O O -
PP -
Dibutyl phthalate Fluid Temperatures

Chromic acid, > 30 % aqueous 20 °C 40 °C 60 °C 80 °C
Fluid Temperatures
solution
PVC-U ++ ++ O -
20 °C 40 °C 60 °C 80 °C
PE ++ ++ O -
PVC-U O -
PP ++ O -
PE -
PP -
Dichloroacetic acid Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Chemical Resistance
PVC-U ++ O -
PE O - Dioxane Fluid Temperatures
PP O - 20 °C 40 °C 60 °C 80 °C
PVC-U -
Dichloroacetic acid, <= 50 % aqueous PE ++ O -
Fluid Temperatures
solution PP O -
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O - Ethanol, <= 50% aqueous solution Fluid Temperatures
PE ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PP ++ ++ O - PVC-U ++ ++ O -
PE ++ ++ ++ -
Dichloroacetic acid methyl ester Fluid Temperatures PP ++ ++ ++ ++
20 °C 40 °C 60 °C 80 °C
PVC-U - Ethyl alcohol, 96% Fluid Temperatures
PE ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PP ++ ++ ++ O PVC-U ++ ++ O -
PE ++ ++ ++ -
Dichlorobenzene Fluid Temperatures PP ++ ++ ++ ++
20 °C 40 °C 60 °C 80 °C
PVC-U - Ethanolamine Fluid Temperatures
PE O - 20 °C 40 °C 60 °C 80 °C
PP O - PVC-U -
PE ++ O -
Dichlorodifluoromethane, gaseous Fluid Temperatures PP ++ O -
20 °C 40 °C 60 °C 80 °C
PVC-U - Ethyl benzene Fluid Temperatures
PE O - 20 °C 40 °C 60 °C 80 °C
PP O - PVC-U -
PE O -
Dichloroethylene Fluid Temperatures PP O -
20 °C 40 °C 60 °C 80 °C
PVC-U - Ethylacetate Fluid Temperatures
PE - 20 °C 40 °C 60 °C 80 °C
PP - PVC-U -
PE ++ O
Diesel oil Fluid Temperatures PP ++ O
20 °C 40 °C 60 °C 80 °C
PVC-U O O - Ethylchloride, gaseous Fluid Temperatures
PE O O - 20 °C 40 °C 60 °C 80 °C
PP O - PVC-U -
PE O -
Diethanolamine, aqueous solution Fluid Temperatures PP O -
20 °C 40 °C 60 °C 80 °C
PVC-U - Ethylene diamine Fluid Temperatures
PE ++ O - 20 °C 40 °C 60 °C 80 °C
PP ++ O - PVC-U -
PE ++ ++ ++ -
Diethyl ether Fluid Temperatures PP ++ ++ ++ O
20 °C 40 °C 60 °C 80 °C
PVC-U - Ethylene glycol Fluid Temperatures
PE O - 20 °C 40 °C 60 °C 80 °C
PP O - PVC-U -
PE + + O -
Diethylamine Fluid Temperatures PP + + O -
20 °C 40 °C 60 °C 80 °C
PVC-U - Ethylene glycol, <= 50% aqueous
Fluid Temperatures
PE ++ O - solution
PP ++ O - 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O -
Diisobutyl ketone Fluid Temperatures PE + + O -
20 °C 40 °C 60 °C 80 °C PP + + + O
PVC-U -
PE ++ O - Ethylenediamine tetraacetic acid,
Fluid Temperatures
PP ++ O - aqueous solution
20 °C 40 °C 60 °C 80 °C
Diisopropyl ether Fluid Temperatures PVC-U O -
20 °C 40 °C 60 °C 80 °C PE + + O -
PVC-U - PP + + O -
PE O -
PP O - Ferric chloride Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Dimethyl formamide Fluid Temperatures PVC-U ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PE ++ ++ ++ -
PVC-U - PP ++ ++ ++ ++
PE ++ ++ O -
PP ++ ++ ++ O Fluorosilicic acid, < = 32 % aqueous
Fluid Temperatures
solutions
20 °C 40 °C 60 °C 80 °C
Dimethylamine Fluid Temperatures
PVC-U ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ -
PVC-U -
PP ++ ++ ++ O
PE ++ O -
PP ++ O -
120
Chemical Resistance
Formaldehyde, <= 40 % aqueous Glycerol, Glycerin Fluid Temperatures

Fluid Temperatures
solution 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U ++ ++ ++ -
PVC-U + + O - PE ++ ++ ++ -
PE + + O - PP ++ ++ ++ ++
PP + + O -
Glycin, 10% aqueous solution Fluid Temperatures

Formamide Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U ++ ++ O -
PVC-U - PE ++ ++ O -
PE ++ ++ ++ - PP ++ ++ O -
PP ++ ++ ++ O
Glycolic acid, 37% aqueous solution Fluid Temperatures

Formic acid, > 25-50 % aqueous 20 °C 40 °C 60 °C 80 °C
Fluid Temperatures
solution
PVC-U ++ ++ O -
20 °C 40 °C 60 °C 80 °C
PE + + O -
PVC-U + + O -
PP + + O -
PE + + O -
PP + + O -
Heptane Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Formic acid, > 60 % aqueous solution Fluid Temperatures
PVC-U ++ O -
20 °C 40 °C 60 °C 80 °C
PE ++ O -
PVC-U O -
PP O -
PE + + O -
PP O -
Hexane Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Formic acid, >10-25 % aquesous
Fluid Temperatures PVC-U ++ O -
solution
20 °C 40 °C 60 °C 80 °C PE ++ O -
PVC-U + + O - PP O -
PE + + O -
PP + + O - Hydrazine Hydrate, aqueous solution Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Formic acid, >50-60 %, aqueous PVC-U ++ O -
Fluid Temperatures
solution PE ++ ++ O -
20 °C 40 °C 60 °C 80 °C PP ++ O -
PVC-U + + O -
PE + + O - Hydrochloric acid, <= 10% aqueous
Fluid Temperatures
PP + + O - solution
20 °C 40 °C 60 °C 80 °C
Formic acid, 0-10% aqueous solution Fluid Temperatures PVC-U ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PE + + + -
PVC-U + + O - PP + + + +
PE + + O -
PP ++ + O - Hydrochloric acid, > 10-25 % aqueous
Fluid Temperatures
solution
20 °C 40 °C 60 °C 80 °C
Fuel oil, heavy fuel oil Fluid Temperatures
PVC-U ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C
PE + + + -
PVC-U -
PP + + + +
PE O -
PP O -
Hydrochloric acid, > 25-30% aqueous
Fluid Temperatures
solution
Furfural Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U ++ ++ ++ -
PVC-U - PE + + + -
PE ++ ++ O - PP + + + +
PP ++ O O O
Hydrochloric acid, > 30 - 37 %

Fluid Temperatures
Furfuryl alcohol Fluid Temperatures aqueous solution
20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U - PVC-U ++ ++ ++ -
PE ++ ++ O - PE + + O -
PP ++ ++ O - PP O O O O
Gasoline Fluid Temperatures Hydrochloric acid, > 37 %, aqueous

Fluid Temperatures
20 °C 40 °C 60 °C 80 °C solution
PVC-U O - 20 °C 40 °C 60 °C 80 °C
PE O - PVC-U O -
PP O - PE O -
PP O -
Gelatine, aqueous solution Fluid Temperatures

20 °C 40 °C 60 °C 80 °C Hydrocyanic acid Fluid Temperatures
PVC-U ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ - PVC-U ++ ++ O -
PP ++ ++ ++ O PE ++ ++ ++ -
PP ++ ++ ++ O
Glucose, aqueous solutions Fluid Temperatures

20 °C 40 °C 60 °C 80 °C Hydrofluoric acid, <= 10 % aqueous
Fluid Temperatures
solution
PVC-U ++ ++ O -
20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ -
PVC-U + + O -
PP ++ ++ ++ ++
PE + + O -
PP + + O O
Chemical Resistance
PVC-U ++ O -
Hydrofluoric acid, > 40% - 75% PE ++ O -
Fluid Temperatures
aqueous solution PP ++ O -
20 °C 40 °C 60 °C 80 °C
PVC-U - Isopropyl alcohol Fluid Temperatures
PE + + O - 20 °C 40 °C 60 °C 80 °C
PP O O PVC-U ++ O -
PE ++ ++ O -
Hydrofluoric acid, > 75 % aqueous PP ++ ++ O -
Fluid Temperatures
solution
20 °C 40 °C 60 °C 80 °C
Lactic acid, aqueous solution Fluid Temperatures
PVC-U -
20 °C 40 °C 60 °C 80 °C
PE -
PVC-U ++ O O -
PP -
PE + + + -
PP + + + O
Hydrofluoric acid, 10% - 40 %
Fluid Temperatures
aqueous solution
20 °C 40 °C 60 °C 80 °C Lead Acetate Fluid Temperatures
PVC-U O O - 20 °C 40 °C 60 °C 80 °C
PE + + O - PVC-U ++ ++ ++ -
PP + + O O PE ++ ++ ++ -
PP ++ ++ ++ O
Hydrogen chloride, gaseous Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Linseed oil Fluid Temperatures
PVC-U ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ O - PVC-U ++ ++ O -
PP ++ ++ O - PE ++ ++ O -
PP ++ ++ ++ O
Hydrogen peroxide, < 5 % aqueous
Fluid Temperatures
solution Lithium salts, aqueous saturated
Fluid Temperatures
20 °C 40 °C 60 °C 80 °C solutions
PVC-U ++ ++ - 20 °C 40 °C 60 °C 80 °C
PE + O - PVC-U ++ ++ ++ -
PP O - PE ++ ++ ++ -
PP ++ ++ ++ ++
Hydrogen peroxide, >= 5 % aqueous
Fluid Temperatures
solution Magnesium salts, aqueous, saturated
Fluid Temperatures
20 °C 40 °C 60 °C 80 °C solutions
PVC-U ++ ++ - 20 °C 40 °C 60 °C 80 °C
PE O - PVC-U ++ ++ ++ -
PP - PE ++ ++ ++ -
PP ++ ++ ++ ++
Hydrogen Sulfide gaseous Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Maleic acid, cold saturated, aqueous
Fluid Temperatures
solution
PVC-U ++ ++ O -
20 °C 40 °C 60 °C 80 °C
PE ++ ++ O -
PVC-U ++ O
PP ++ ++ ++ O
PE ++ ++ O
PP ++ ++ O
Hydrogen sulfide, aqueous saturated
Fluid Temperatures
solution
20 °C 40 °C 60 °C 80 °C Mercury salts, aqueous, saturated
Fluid Temperatures
solutions
PVC-U ++ ++ O -
20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ -
PVC-U ++ ++ O -
PP ++ ++ ++ O
PE ++ ++ ++ -
PP ++ ++ ++ ++
Hydrogen, gas Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Methane, gaseous Fluid Temperatures
PVC-U ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ -
PVC-U ++ O
PP ++ ++ ++ O
PE ++ O
PP ++ O
Hydroquinone, cold saturated
Fluid Temperatures
aqueous solution
20 °C 40 °C 60 °C 80 °C Methanol Fluid Temperatures
PVC-U ++ O - 20 °C 40 °C 60 °C 80 °C
PE ++ O - PVC-U ++ ++ O -
PP ++ O - PE ++ ++ ++ -
PP ++ ++ ++ O
Iron salts, aqueous, saturated
Fluid Temperatures
solutions Methyl acetate Fluid Temperatures
20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ - PVC-U -
PE ++ ++ ++ - PE ++ ++ O
PP ++ ++ ++ ++ PP ++ ++ O
Isobutylacetate Fluid Temperatures Methyl Amine, 32 % aqueous solution Fluid Temperatures

20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U - PVC-U O
PE ++ O - PE ++ O
PP ++ O - PP ++ O
Isooctane Fluid Temperatures Methyl bromide, gaseous Fluid Temperatures

20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
122
Chemical Resistance
PVC-U - PVC-U ++ ++ O -
PE - PE ++ ++ O -
PP - PP ++ ++ ++ O
Methyl ethyl ketone Fluid Temperatures Mixed acids: sulfuric / nitric / water,
Fluid Temperatures
20 °C 40 °C 60 °C 80 °C various concentrations
PVC-U - 20 °C 40 °C 60 °C 80 °C
PE ++ O PVC-U O
PP ++ O PE O
PP O
Methyl isobutyl ketone Fluid Temperatures

20 °C 40 °C 60 °C 80 °C N-Methylpyrrolidon Fluid Temperatures
PVC-U - 20 °C 40 °C 60 °C 80 °C
PE ++ O PVC-U -
PP ++ O PE ++ O
PP ++ O
Methyl acetate Fluid Temperatures

20 °C 40 °C 60 °C 80 °C N,N-Dimethylaniline Fluid Temperatures
PVC-U - 20 °C 40 °C 60 °C 80 °C
PE ++ ++ O PVC-U -
PP ++ ++ O PE ++ O
PP O
Methyl Amine, 32 % aqueous solution Fluid Temperatures

20 °C 40 °C 60 °C 80 °C Nickel salts, aqueous, saturated
Fluid Temperatures
solutions
PVC-U O
20 °C 40 °C 60 °C 80 °C
PE ++ O
PVC-U ++ ++ O -
PP ++ O
PE ++ ++ ++ -
PP ++ ++ ++ ++
Methyl bromide, gaseous Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Nitrating acid Fluid Temperatures
PVC-U -
20 °C 40 °C 60 °C 80 °C
PE -
PVC-U O O -
PP -
PE -
PP -
Methyl ethyl ketone Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Nitric acid, > 30 - 55 % aqueous
PVC-U - Fluid Temperatures
solution
PE ++ O 20 °C 40 °C 60 °C 80 °C
PP ++ O PVC-U + + -
PE -
Methyl isobutyl ketone Fluid Temperatures PP -
20 °C 40 °C 60 °C 80 °C
PVC-U - Nitric acid, > 6 - 20 % aqueous
Fluid Temperatures
PE ++ O solution
PP ++ O 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ -
Methyl methacrylate Fluid Temperatures PE O -
20 °C 40 °C 60 °C 80 °C PP O O
PVC-U -
PE ++ ++ O Nitric acid, >20 - 30 % aqueous
Fluid Temperatures
solution
PP ++ ++ O
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ -
Milk Fluid Temperatures
PE O -
20 °C 40 °C 60 °C 80 °C
PP O O
PVC-U ++ ++ ++ -
PE ++ ++ ++ -
Nitric acid, >55 - 65% aqueous
PP ++ ++ ++ ++ Fluid Temperatures
solution
20 °C 40 °C 60 °C 80 °C
Mineral oil Fluid Temperatures PVC-U O O -
20 °C 40 °C 60 °C 80 °C PE -
PVC-U ++ ++ O PP -
PE ++ ++ O
PP ++ ++ O Nitric acid, ≤ 6 % aqueous solution Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
50% Chromic acid / 15% sulfuric acid PVC-U ++ ++ ++ -
Fluid Temperatures
/ 35% water
PE O -
20 °C 40 °C 60 °C 80 °C
PP O O O
PVC-U O O -
PE -
Nitrobenzene Fluid Temperatures
PP -
20 °C 40 °C 60 °C 80 °C
PVC-U -
Mixed acids: 15% nitric / 15% hydro-
Fluid Temperatures PE ++ O
fluoric / 18% sulfuric
20 °C 40 °C 60 °C 80 °C PP ++ O
PVC-U O
PE - Nitrogen Gas Fluid Temperatures
PP - 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ -
Mixed acids: 30% sulfuric / 60% PE ++ ++ ++ -
Fluid Temperatures
phosphoric / 10% water PP ++ ++ ++ ++
20 °C 40 °C 60 °C 80 °C
Chemical Resistance
Nitrotoluene (o-, m-, p-) Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U ++ ++ ++ -
PVC-U - PE + + O
PE ++ O PP + + + O
PP O
Phosphoric acid, >60-85 % aqueous
Fluid Temperatures
Nitrous acid Fluid Temperatures solution
20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O - PVC-U + + O -
PE ++ O PE + + O
PP ++ O PP + + O
Nitrous gases (Nitric oxide), Fluid Temperatures Phosphoric acid, >85-95 % aqueous
Fluid Temperatures
solution
20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C
PVC-U ++ O
PVC-U + + O -
PE O
PE + + O
PP O
PP + + O
Oleic acid Fluid Temperatures

Phosphorous chlorides: -trichloride
20 °C 40 °C 60 °C 80 °C Fluid Temperatures
-pentachloride -oxichloride
PVC-U ++ ++ O - 20 °C 40 °C 60 °C 80 °C
PE ++ O PVC-U -
PP ++ O PE O
PP O
Oleum, <= 10 % SO3 Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Photographic fixer, commercial
Fluid Temperatures
PVC-U - solutions
PE - 20 °C 40 °C 60 °C 80 °C
PP - PVC-U ++ ++ O -
PE + + O -
Olive oil Fluid Temperatures PP + + O
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O - Phthalic acid, aqueous saturated
Fluid Temperatures
solution
PE + + O
20 °C 40 °C 60 °C 80 °C
PP + + O
PVC-U ++ O
PE ++ ++ ++ -
Oxygen, gaseous Fluid Temperatures
PP ++ ++ ++ O
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ -
Potassium aluminium salts(alum),
PE ++ ++ O Fluid Temperatures
aqueous, saturated solutions
PP ++ ++ O 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ -
Palm oil, palm nut oil Fluid Temperatures PE ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PP ++ ++ ++ ++
PVC-U ++ ++ ++ -
PE ++ ++ ++ - Potassium cyanide, sodium Cyanide,
Fluid Temperatures
PP ++ O aqueous solutions
20 °C 40 °C 60 °C 80 °C
Peracetic acid, > 10 % Fluid Temperatures PVC-U ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PE ++ ++ ++ -
PVC-U O O PP ++ ++ ++ ++
PE O
PP O Potassium formiate, aqueous
Fluid Temperatures
solutions
20 °C 40 °C 60 °C 80 °C
Peracetic acid Fluid Temperatures
PVC-U ++ ++ O -
20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ -
PVC-U O O
PP ++ ++ ++ ++
PE O
PP O
Potassium hydroxide <= 50 %
Fluid Temperatures
aqueous solution
Perchloric acid, <= 70 % aqueous
Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
solution
PVC-U ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C
PE ++ ++ ++ -
PVC-U O
PP + + + +
PE O
PP O
Potassium hypochlorite, <=16%
Fluid Temperatures
active Chlorine
Peroxo monosulfuric acid, 0-10 %
Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
aqueous solution
PVC-U + + -
20 °C 40 °C 60 °C 80 °C
PE O
PVC-U O
PP O
PE -
PP -
Potassium Permanganate, aqueous
Fluid Temperatures
solution
Phenol, <= 10 % aqueous solution Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C
PVC-U + + O -
PVC-U O
PE O O -
PE ++ ++ O
PP O O -
PP ++ ++ O
Potassium persulphate, aqueous

Phosphoric acid, <= 60 % aqueous Fluid Temperatures
Fluid Temperatures solution
solution
20 °C 40 °C 60 °C 80 °C
124
Chemical Resistance
PVC-U ++ ++ O - PE ++ ++ ++ -
PE ++ ++ ++ - PP ++ ++ ++ ++
PP ++ ++ ++ O
Sodium chlorite, aqueous solution Fluid Temperatures
Propane, gaseous Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U ++ ++ ++ -
PVC-U ++ O PE + + O
PE ++ ++ O PP + + O
PP ++ O
Sodium Chromate, diluted aqueous
Fluid Temperatures
Propionic acid Fluid Temperatures solution
20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U ++ O PVC-U ++ ++ O
PE ++ O PE O
PP ++ O PP O
Propionic acid, 50% aqueous solution Fluid Temperatures Sodium hydrogen sulfite, Fluid Temperatures
20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O - PVC-U ++ ++ ++ -
PE ++ ++ ++ - PE ++ ++ ++ -
PP ++ ++ ++ O PP ++ ++ ++ ++
Propylene glycol Fluid Temperatures Sodium hydroxide, <=10% aqueous

Fluid Temperatures
solution
20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C
PVC-U -
PVC-U ++ ++ + -
PE + + O -
PE ++ ++ ++ -
PP + + + O
PP + + + O
Propylene glycol <= 50% aqueous

Fluid Temperatures Sodium hydroxide, > 50 % Fluid Temperatures
solution
20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O - PVC-U O O -
PE + + O - PE O O O -
PP + + + O PP O O O O
Pyridine Fluid Temperatures Sodium hydroxide, >10-50 % aqueous

Fluid Temperatures
solution
20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C
PVC-U -
PVC-U ++ ++ O -
PE ++ O
PE ++ ++ ++ -
PP O
PP + + O O
Salicylaldehyde Fluid Temperatures

Sodium Hypochlorite from elec-
20 °C 40 °C 60 °C 80 °C Fluid Temperatures
trochlorination plants
PVC-U O - 20 °C 40 °C 60 °C 80 °C
PE O PVC-U O
PP O PE O
PP O
Silicic acids Fluid Temperatures
20 °C 40 °C 60 °C 80 °C Sodium hypochlorite, < 0.5 ppm
Fluid Temperatures
PVC-U ++ ++ ++ - active chlorine
PE ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PP ++ ++ ++ ++ PVC-U ++ ++ O -
PE ++ ++ O -
Silicone oils Fluid Temperatures PP ++ ++ O -
20 °C 40 °C 60 °C 80 °C
PVC-U ++ O Sodium hypochlorite, <= 6 % active
Fluid Temperatures
chlorine
PE ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C
PP ++ ++ ++ ++
PVC-U + + O -
PE -
Silver salts, aqueous saturated
Fluid Temperatures PP -
solutions
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ - Sodium hypochlorite, > 6 % active
Fluid Temperatures
chlorine
PE ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C
PP ++ ++ ++ ++
PVC-U + + -
PE -
Sodium borate, aqueous solution Fluid Temperatures
PP -
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O
Sodium hypochlorite, 0.5 - 2 ppm
PE ++ ++ ++ - Fluid Temperatures
active chlorine
PP ++ ++ ++ ++ 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O -
Sodium Carbonate, aqueous solutions Fluid Temperatures PE ++ ++ -
20 °C 40 °C 60 °C 80 °C PP ++ ++ -
PVC-U ++ ++ ++ -
PE ++ ++ ++ - Sodium persulphate, aqueous, cold
Fluid Temperatures
PP ++ ++ ++ ++ saturated solution
20 °C 40 °C 60 °C 80 °C
Sodium Chloride, aqueous saturated PVC-U ++ ++ O -
Fluid Temperatures
solution PE ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PP ++ ++ ++ O
PVC-U ++ ++ ++ -
Chemical Resistance
PVC-U O
Sodium salts, aqueous, saturated PE O
Fluid Temperatures
solutions PP O
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ - Tannic acid, aqueous solution Fluid Temperatures
PE ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PP ++ ++ ++ ++ PVC-U ++ O
PE ++ O
Starch solution, aqueous solutions Fluid Temperatures PP ++ O
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ - Tartaric acid, <=10% aqueous
Fluid Temperatures
PE ++ ++ ++ - solution
PP ++ ++ ++ ++ 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ -
Styrene Fluid Temperatures PE ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PP ++ ++ ++ O
PVC-U -
PE O Tetrachloroethane Fluid Temperatures
PP O 20 °C 40 °C 60 °C 80 °C
PVC-U -
Succinic acid, aquesous solutions Fluid Temperatures PE -
20 °C 40 °C 60 °C 80 °C PP -
PVC-U ++ ++ ++ -
PE ++ ++ ++ - Tetrachloroethylene Fluid Temperatures
PP ++ ++ ++ O 20 °C 40 °C 60 °C 80 °C
PVC-U -
Sulfuric acid, <= 25% aqueous PE O
Fluid Temperatures
solution PP O
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ - Tetrachloromethane Fluid Temperatures
PE ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PP + + + O PVC-U -
PE -
Sulfuric acid, > 25-50% solution Fluid Temperatures PP -
20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ - Tetrahydrofurane Fluid Temperatures
PE ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PP + + + + PVC-U -
PE O
Sulfuric acid, > 50 - 70% solution Fluid Temperatures PP O
20 °C 40 °C 60 °C 80 °C
PVC-U + + + - Tetramethyl ammoniumhydroxide Fluid Temperatures
PE ++ ++ ++ - 20 °C 40 °C 60 °C 80 °C
PP + + + O PVC-U ++ O O -
PE ++ O O -
Sulfuric acid, > 70 - 78% solution Fluid Temperatures PP ++ O O
20 °C 40 °C 60 °C 80 °C
PVC-U + + - Tin (II) Chloride, aqueous saturated
Fluid Temperatures
PE ++ ++ ++ - solution
PP + + O O 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ ++ -
Sulfuric Acid, > 78 - 93% solution Fluid Temperatures PE ++ ++ ++ -
20 °C 40 °C 60 °C 80 °C PP ++ ++ ++ O
PVC-U + + -
PE - Toluene Fluid Temperatures
PP - 20 °C 40 °C 60 °C 80 °C
PVC-U -
Sulfuric acid, > 93 - 96% solution Fluid Temperatures PE O
20 °C 40 °C 60 °C 80 °C PP O
PVC-U + + -
PE - Trichloroacetic acid, aqueous
Fluid Temperatures
PP - solutions
20 °C 40 °C 60 °C 80 °C
Sulfuric acid, > 96% - 98% solution Fluid Temperatures PVC-U O
20 °C 40 °C 60 °C 80 °C PE ++ ++ O
PVC-U + O - PP ++ ++ O
PE -
PP - Trichloroethane Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Sulfurous acid, aqueous solution Fluid Temperatures PVC-U -
20 °C 40 °C 60 °C 80 °C PE O
PVC-U ++ ++ O - PP O
PE ++ ++ O -
PP ++ ++ O - Trichloroethylene Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Sulfuryl chloride Fluid Temperatures PVC-U -
20 °C 40 °C 60 °C 80 °C PE -
PVC-U - PP -
PE -
PP - Trichloromethane Fluid Temperatures
20 °C 40 °C 60 °C 80 °C
Sulphur dioxide, gaseous, dry and PVC-U -

Fluid Temperatures
moist PE O
20 °C 40 °C 60 °C 80 °C PP O
126
Chemical Resistance
Mineral water Fluid Temperatures

Triethylamine Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U ++ ++ ++ -
PVC-U - PE ++ ++ ++ -
PE O PP ++ ++ ++ ++
PP O
Potable Water Fluid Temperatures
Trifluoroacetic acid, aqueous solution Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U ++ ++ ++ -
PVC-U - PE ++ ++ ++ -
PE ++ O PP ++ ++ ++ ++
PP ++ O
Sea water Fluid Temperatures
Turpentine oil Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U ++ ++ ++ -
PVC-U O PE ++ ++ ++ -
PE O PP ++ ++ ++ ++
PP -
Water - distilled - deionised Fluid Temperatures
Urea, aqueous solution Fluid Temperatures 20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C PVC-U ++ ++ ++ -
PVC-U ++ ++ O - PE ++ ++ ++ -
PE ++ ++ ++ - PP ++ ++ ++ ++
PP ++ ++ ++ O
Water, drinking, chlorinated, ≤ 0.1
Fluid Temperatures
Urine Fluid Temperatures ppm Chlorine
20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U ++ ++ O - PVC-U ++ ++ ++ -
PE ++ ++ ++ - PE ++ ++ ++ -
PP ++ ++ ++ O PP ++ ++ ++ ++
Vinyl acetate Fluid Temperatures Xylene Fluid Temperatures
20 °C 40 °C 60 °C 80 °C 20 °C 40 °C 60 °C 80 °C
PVC-U - PVC-U -
PE ++ ++ O PE -
PP ++ O PP -
Vinyl Chloride gas Fluid Temperatures Zinc salts, aqueous saturated

Fluid Temperatures
solutions
20 °C 40 °C 60 °C 80 °C
20 °C 40 °C 60 °C 80 °C
PVC-U -
PVC-U ++ ++ ++ -
PE -
PE ++ ++ ++ -
PP -
PP ++ ++ ++ ++
++ Resistant
+ Limited Resistance
O Contact GF Hakan Plastik
- Not Resistant
GF Hakan Plastik Boru ve Profil Sanayi ve Ticaret A.Ş. has right to

change all the technical values and visuals specified in this bro-
chure. We do not accept responsibility for printing-related errors.
Notes
128
Notes
Notes
130
GF Piping Systems
Worldwide at home
Our sales companies and representatives ensure
local customer support in more than 100 countries.
www.gfps.com
Argentina / Southern South America France Mexico / Northern Latin America Singapore
Georg Fischer Central Plastics Sudamérica S.R.L. Georg Fischer SAS Georg Fischer S.A. de C.V. George Fischer Pte Ltd
Buenos Aires / Argentina 95932 Roissy Charles de Gaulle Cedex CP 66603 Apodaca, Nuevo León / Mexico 528 872 Singapore
Phone +54 11 4512 02 90 Phone +33 (0) 1 41 84 68 84 Phone +52 (81) 1340 8586 Phone +65 6747 0611
[email protected] [email protected] Fax +52 (81) 1522 8906 Fax +65 6747 0577
www.gfps.com/ar www.gfps.com/fr [email protected] [email protected]
www.gfps.com/mx www.gfps.com/sg
Australia Germany
George Fischer Pty Ltd Georg Fischer GmbH Middle East Spain / Portugal
Riverwood NSW 2210 73095 Albershausen Georg Fischer Piping Systems (Switzerland) Ltd Georg Fischer S.A.
Phone +61 (0) 2 9502 8000 Phone +49 (0) 7161 302 0 Dubai / United Arab Emirates 28046 Madrid / Spain
[email protected] [email protected] Phone +971 4 289 49 60 Phone +34 (0) 91 781 98 90
www.gfps.com/au www.gfps.com/de [email protected] [email protected]
www.gfps.com/int www.gfps.com/es
Austria India
Georg Fischer Rohrleitungssysteme GmbH Georg Fischer Piping Systems Pvt. Ltd Netherlands Sweden
3130 Herzogenburg 400 083 Mumbai Georg Fischer N.V. Georg Fischer AB
Phone +43 (0) 2782 856 43-0 Phone +91 22 4007 2000 8161 PA Epe 117 43 Stockholm
[email protected] Fax +91 22 4007 2020 Phone +31 (0) 578 678 222 Phone +46 (0) 8 506 775 00
www.gfps.com/at [email protected] [email protected]
www.gfps.com/in www.gfps.com/nl www.gfps.com/se
Belgium / Luxembourg
Georg Fischer NV/SA Indonesia New Zealand Switzerland
1600 Sint-Pieters-Leeuw / Belgium PT Georg Fischer Indonesia Georg Fischer Ltd Georg Fischer Rohrleitungssysteme (Schweiz) AG
Phone +32 (0) 2 556 40 20 Karawang 41371, Jawa Barat 5018 Upper Hutt
Fax +32 (0) 2 524 34 26 Phone +62 267 432 044 Phone +04 527 9813 Phone +41 (0) 52 631 3026
[email protected] Fax +62 267 431 857 Fax +04 527 9834 [email protected]
www.gfps.com/be [email protected] [email protected] www.gfps.com/ch
www.gfps.com/id www.gfps.com/nz
Brazil Taiwan
Georg Fischer Sist. de Tub. Ltda. Italy Norway Georg Fischer Co. Ltd
04571-020 São Paulo/SP Georg Fischer S.p.A. Georg Fischer AS San Chung Dist., New Taipei City
Phone +55 (0) 11 5525 1311 20864 Agrate Brianza (MB) 1351 Rud Phone +886 2 8512 2822
[email protected] Phone +39 02 921 86 1 Phone +47 67 18 29 00 Fax +886 2 8512 2823
www.gfps.com/br Fax +39 02 921 86 24 7 [email protected] www.gfps.com/tw
[email protected] www.gfps.com/no
Canada www.gfps.com/it United Kingdom / Ireland
Georg Fischer Piping Systems Ltd Philippines George Fischer Sales Limited
Mississauga, ON L5T 2B2 Japan George Fischer Pte. Ltd. Coventry, CV2 2ST / United Kingdom
Phone +1 (905) 670 8005 Georg Fischer Ltd Phone +44 (0) 2476 535 535
Fax +1 (905) 670 8513 530-0003 Osaka 1500 San Juan City [email protected]
[email protected] Phone +81 (0) 6 6341 2451 Phone +632 571 2365 www.gfps.com/uk
www.gfps.com/ca [email protected] Fax +632 571 2368
www.gfps.com/jp [email protected] USA / Caribbean
China www.gfps.com/sg Georg Fischer LLC
Georg Fischer Piping Systems Ltd Korea 92618 Irvine, CA / USA
Shanghai 201319 Georg Fischer Korea Co. Ltd Poland Phone +1 714 731 8800
Phone +86 21 3899 3899 Unit 2501, U-Tower Georg Fischer Sp. z o.o. Fax +1 714 731 6201
[email protected] 120 Heungdeok Jungang-ro 05-090 Sekocin Nowy [email protected]
www.gfps.com/cn (Yeongdeok-dong) Phone +48 (0) 22 31 31 0 50 www.gfps.com/us
Giheung-gu, Yongin-si, Gyeonggi-do [email protected]
Denmark / Iceland Phone +82 31 8017 1450 www.gfps.com/pl Vietnam
Georg Fischer A/S Fax +82 31 217 1454 George Fischer Pte Ltd
2630 Taastrup / Denmark [email protected] Romania
Phone +45 (0) 70 22 19 75 www.gfps.com/kr Georg Fischer Piping Systems (Switzerland) Ltd Ho Chi Minh City
[email protected] 020257 Bucharest - Sector 2 Phone + 84 28 3948 4000
www.gfps.com/dk Malaysia Phone +40 (0) 21 230 53 80 Fax + 84 28 3948 4010
George Fischer (M) Sdn. Bhd. [email protected] [email protected]
Finland 41200 Klang, Selangor Darul Ehsan www.gfps.com/int www.gfps.com/vn
Georg Fischer AB Phone +60 (0) 3 3122 5585
01510 Vantaa Fax +60 (0) 3 3122 5575 Russia International
Phone +358 (0) 9 586 58 25 [email protected] Georg Fischer Piping Systems (Switzerland) Ltd Georg Fischer Piping Systems (Switzerland) Ltd
Fax +358 (0) 9 586 58 29 www.gfps.com/my Moscow 125040
[email protected] Phone +7 495 748 11 44 Phone +41 (0) 52 631 3003
www.gfps.com/fi [email protected] Fax +41 (0) 52 631 2893
www.gfps.com/ru [email protected]
www.gfps.com/int
The information and technical data (altogether “Data”) herein are not binding, unless explicitly confirmed in writing.
The Data neither constitutes any expressed, implied or warranted characteristics, nor guaranteed properties or a guaranteed
durability. All Data is subject to modification. The General Terms and Conditions of Sale of Georg Fischer Piping Systems apply.
GF Piping Systems
Georg Fischer Hakan Plastik Boru ve Profil San. Tic. A.Ş.

www.gfps.com/tr
Regional Directorates Production Facilities

İstanbul Tekirdağ / Çerkezköy
Ofishane Plaza Organize San. Bölgesi Gaziosmanpaşa
Merkez Mahallesi Cendere Caddesi Mh. 3. Cd. No:11-13
No:22 Kat:11 Çerkezköy / TEKİRDAĞ
34400 Kağıthane / İSTANBUL Tel: +90 282 726 64 43 (pbx)
Tel: +90 212 809 20 33 (pbx) Fax: +90 282 726 99 33
Fax: +90 212 809 20 37
Şanlıurfa
Antalya Şanlıurfa-Gaziantep Karayolu 16. Km
İnci Plaza Yenigün Mh. 1054. Sok. 2. Organize San. Bölgesi 1. Cd. No:3
No:15 Ofis No:8 ŞANLIURFA
Muratpaşa / ANTALYA Tel: +90 414 369 18 30
Tel: +90 242 321 58 03 Fax: +90 414 369 17 96
Fax: +90 242 321 58 53
Diyarbakır
Şanlıurfa Bulvarı Fırat Mh.
Ahmede Hani Cd. No:4
Yektower İş Merkezi No:13/39
Kayapınar / DİYARBAKIR
Tel: +90 412 251 18 20
Fax: +90 412 251 18 25
Samsun
Kuzey Yıldızı Mah. 100.Yıl Bulv.
No:38 Kat:4 Daire:23 Baran Plaza
Canik / SAMSUN
Tel: +90 362 256 02 33 - 03 33
Ankara
Mustafa Kemal Mahallesi
2131. Cadde Akay İş Merkezi 30-9
Çankaya / ANKARA
© Georg Fischer Hakan Plastik

Turkey, 2021

General Catalogue: Piping Systems

Uploaded by

Copyright:

Available Formats

General Catalogue: Piping Systems

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

General Catalogue: Piping Systems

Uploaded by

Copyright:

Available Formats

General

GF Piping Systems, the largest business line of Georg Fischer Corporation,

Founded in 1965, Hakan Plastik has achieved so many breakthroughs as

GF Hakan Plastik has two production plants in Çerkezköy and Şanlıurfa.

GF Hakan Plastik Training and Technology Center provides all its

We provide state-of-the-art technology by setting the standards

We act in compliance with the local standards in our over 30

Thermal conductivity Low thermal conductivity

Corrosion Behaivors High Corrosion Resistance

Chemical resistance High chemical resistance

Service Life Analysis of Plastics

SCANDINAVIAN COUNTRIES TURKEY RUSSIA-BELARUS

UKRAINE NETHERLANDS BULGARIA UK

UKRAINE SCANDINAVIAN COUNTRIES HUNGARY

SOUTH AFRICA GERMANY- RUSSIA GERMANY

SOUTH AFRICA UK TURKEY BULGARIA

UNITED STATES OF GERMANY

Special Differentiating Features

Middle Layer (PP)

External Layer (PP)

3 [Flame Retardant and UV Reinforced Composite]

Special Gasket System

4 gasket structure which also provides easy

Pipe Structure 3-Layers, Polypropylene based, halogen free composite structure

Acoustic performance of Silenta Extreme was accredited by the famous German

Noise measurement tests were carried out at Fraunhofer Physical Constructions

Silenta Extreme Pipe with Socket Silenta Extreme Elbow 15°

Dia Leng. Thick. Code Packing Dia Code Packing

50 150 2.0 5504005000121 Cartonbox 200 50 5604105000121 Cartonbox 300

200 1000 4,5 5504020000421 Cartonbox 1 50 5604105000421 Cartonbox 300

Silenta Extreme Elbow 87,5°

Dia Code Packing

50 5604105000521 Cartonbox 300

Silenta Extreme Long Elbow 45°

Dia Code Packing

110 5604111004521 Cartonbox 8

50 5601905001022 Cartonbox 100 Silenta Extreme Long Socket

Dia Code Packing Dia Code Packing

50-50 5604205000121 Cartonbox 150 110-110 5604211000821 Cartonbox 20

Silenta Extreme Branch 67,5°

Dia Code Packing

Dia Code Packing

50-50 5604205000321 Cartonbox 100

Dia Code Packing

* Silenta Extreme S Siphon 45° Silenta Extreme P-Trap

Dia Code Packing Dia Code Packing

75 5604607500121 Cartonbox 50 110 5604611000521 Cartonbox 25

Silenta Extreme Floor Trap

Dia Code Packing

110-75-50-50 5604911002022 Cartonbox 12

* Silenta Extreme S Siphon 87,5°

Dia Code Packing

75 5604607500221 Cartonbox 50 Dia Code Packing

110-75-50-50 5604911002122 Cartonbox 12

Silenta Clamp Metal - Vertical Set

Dia Code Packing

Silenta Clamp Metal - Horizontal

Dia Code Packing

* To be used only under the WC stone