1250 GPM Diesel

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

20 2 BATTERY

NOTES: 19 1 TANK,FUEL,185GAL,DOUBLE WALL


1. CUSTOMER PIPING MUST BE SUPPORTED NEAR ALL INTERFACE CONNECTIONS TO ELIMINATE STRAIN. 18 1 PANEL,JOCKEY,METRON,M15ALN23R
2. ALL PIPING SUPPORTS ARE NOT SHOWN FOR CLARITY PURPOSES.
3. ALL POLYMERIC DRAIN LINE PIPING TO THIS LOCATION. 17 1 PANEL,DIESEL,METRON,FD4
42.00
CLEARENCE 4. MINIMUM CLEARANCE TO ANY OBSTRUCTION REQUIRED BY THE NATIONAL ELECTRIC CODE. 16 1 ENGINE,DIESEL,CLARKE,JU6H-UF54
PER NOTE #4 5. SHIPPING DIMENSIONS: 160"L x 106" W x 90"H.
20 16 17 6. ESTIMATED SHIPPING WEIGHT: 11, 600 LBS, ESTIMATED OPERATING WEIGHT: 13, 000 LBS. 15 1 PUMP_JOCKEY
7. CONDUIT AND SMALL PIPING RUNS TO FOLLOW STRUCTURAL MEMBERS, WHERE POSSIBLE, TO AVOID 14 2 VALVE,BFLY,ANVIL,7722,EPDM,GEAR,6
CREATING TRIP HAZARDS.
108.00 13 1 FLOWMETER,GROOVED,GERAND K-1250-6
8. TO ACHIEVE THE PROPER BUILDING FOUNDATION DESIGN, AN ENGINEER SHALL BE RETAINED WHO IS
107.00 FAMILIAR WITH LOCAL BUILDING CODES, SOIL CONDITIONS, AND ANCHORING REQUIREMENTS. 12 2 VALVE,AIR RELEASE,150PSI, Mdl# 15,.75
TYP. 9. BASE PLATE SETTING PRIOR TO PIPING: GROUTING PROCEDURES AND FINAL ALIGNMENT MUST BE IN
ACCORDANCE WITH THE XYLEM A-C FIRE PUMP INSTRUCTION MANUAL. 11 1 VALVE,CLA-VAL,2050B-4KG1,CL150,6
10. INSTALL CHECK VALVE WITH HINGE PINS IN THE VERTICAL POSITION. 10 1 WASTE CONE,C.S.,6x8,CL150,CLOSED
11. PRESSURE SENSING LINE DRAINS TO BE PIPED TO THE SKID DRAIN MANIFOLD.
9 1 VALVE, BUTTERFLY
ITEMS TO SHIP LOOSE: 8 1 VALVE,CHECK,NIBCO,KW-900-W,8
MUFFLER. 7 1 DISCHARGE GAUGE
METERING AND PRESSURE GAUGES.
ANY TANK PIPING THAT EXCEEDS THE MAXIMUM SHIPPING HEIGHT. 6 1 PUMP,8100,CL150,8x6x13F,CW
18 5 1 SUCTION GAUGE
ACCESS TO CUSTOMER INTERFACE CONNECTIONS:
4 1 VALVE,GATE,OSY,NIBCO,F-607-RW,8
CONTROL PANEL A. SUCTION: FLANGED, 8", CLASS 150#, RF.
ON ENGINE B. DISCHARGE: FLANGED,8", CLASS 150#, RF. 3 4 SHACKLE 5 TON
C. RELIEF VALVE DISCHARGE: 8" CLASS 150#. 2 4 LIFTING PLATE FOR 8" CHANNEL
1 1 SKID
PAINT SPECIFICATIONS: SYM QTY DESCRIPTION
PAINT PER XYLEM FLOWTRONEX SPEC FPP-002.
BOM
54.00
TYP.

42.00
CLEARENCE
PER NOTE #4

1.00
A TYP.
.00

15 11 C 10 9
160.00 52.81 1.00 .00
TYP.
19 14 13 12

86.65

46.51
45.33
FUEL
LINE 39.31

23.00 23.00

NOT FOR CONSTRUCTION


8.00 DRN: DATE:
I. CETINKAYA 7/25/2011
10661 NEWKIRK STREET
CHK: DATE:
DALLAS, TX 75220
.00 M. HERNANDEZ 10/3/2011
800.786.7480
DRAWING
#: FDFH-1250-2-S
1 3 2 4 5 6 7 8 DRAWING NAME:
THIS DRAWING AND THE INFORMATION DEPICTED THEREIN IS THE
PROPERTY OF XYLEM. COPIES ARE ISSUED IN STRICT
1250 GPM STANDARD DRAWING
136.00 24.00 .00 CONFIDENCE AND SHALL NOT BE REPRODUCED OR COPIED, OR
USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF
SIZE REV SHEET :
PRODUCTS WITHOUT PRIOR WRITTEN PERMISSION OF XYLEM. B 1 /1

You might also like