Project : FPSO ALMIRANTE

Project Number : 17056

CDR
P.O. Nr. Seq. Rev.
Code

SBM Document Number : 001 . 17056 . 000028 - AK 007 - 01

SBM CDR Description : Equipment Index & Data Sheets
CDR Code FC Applicable For This Order ? : NO (This Manual includes - Maintenance Manual / Schedule)

This document is part of VDB : VDB2

Supplier : Air Liquide
Address : Advanced Technology US LLC
9811 Kate Freeway Suite 100
77024, Houston, US

Package Description : PME - CO2 Removal Package

Vendor P.O. Reference : 001.17056.000028
Vendor Document Number : NG20088-M-2600
Vendor Document Revision : 01
Document Title : Equipment Datasheet - Cartridge Filter

Total Pages (incl. front page) : 5

Applicable Tag Number(s) :
772-VEVF-0203

Notes :

v 8-2
 FPSO
EQUIPMENT DATASHEET - CARTRIDGE FILTER

001.17056.0000028-AK007 01 PAGE: 2 of 5

Status / Date No. of

Written by Checked by Approved by
Revision (DD-MMM-YYYY) Pages

00 20-Apr-2021 5 RSO CCK MAG

01 28-Jun-2021 5 RSO CCK MAG

Last Issue
REASON FOR REVISION
Revised Section

00 Issued For Review

01 Issued For Approval

 FPSO ALMIRANTE TAMANDARE
CO2 REMOVAL PACKAGE
EQUIPMENT DATA SHEET - CARTRIDGE FILTERS

Document No: 001.17056.000028-AK007 Area(Module) TS024 Date: 28-Jun-21

Tag No.: 772-VEVF-0203 No. Req. 1 x 100% By: RSO
Operation: CO2 Removal Package Project FPSO ALMIRANTE TAMANDARE Reviewed: CCK
Services: Cartridge Filters Job No. NG20088 Approved: MAG
Revision: 01 Page: 3 of 5 REV
PRESSURE VESSEL DATA SHEET
PROCESS DESIGN DATA
1 CONTENTS HYDROCARBON GAS
2 OPERATING TEMPERATURE (°C) 33.1 - 33.1
3 OPERATING PRESSURE (kPag) 4,740
4 HOLDING CAPACITY (m 3) 0.623 01
5 CASE DESCRIPTION
6 VAPOUR FLOW (kg/h)
7 HC LIQUID FLOW (kg/h)
8 WATER FLOW (kg/h)
9 VAPOUR MOLECULAR WEIGHT
10 VAPOUR DENSITY (kg/m3)
REFER PROCESS DATASHEET
11 VAPOUR VISCOSITY (cP)
001.17056.000028-AK003-00_Cartridge Filter
12 HC LIQUID DENSITY (kg/m3)
13 HC LIQUID VISCOSITY (cP)
14 HC LIQUID SURFACE TENSION mN/m
15 WATER DENSITY (kg/m3)
16 WATER VISCOCITY (cP)
17 MECHANICAL DESIGN DATA
18 DESIGN TEMPERATURE (°C) -29 / 85 VESSEL ORIENTATION VERTICAL
19 DESIGN PRESSURE (kPag) FV / 7,000 MAWP / MEWP (kPag) TBC 01
20 TEST PRESSURE (kPag) AS PER CODE MDMT (°C) TBC 01
21 INTERNAL VACUUM (kPag) FV ERECTION/SHIPPING WEIGHT (kg) (NOTE 28) 01
22 DIAMETER OF SHELL (O.D) (mm) 24" TOTAL OPERATING WEIGHT (kg) (NOTE 28) 01
23 TAN. TO T-FLANGE DIMENSION (mm) 2500 (HOLD) WEIGHT FULL OF WATER (kg) (NOTE 28) 01
24 WALL THICKNESS SHELL (mm) (NOTE 28) INTERNALS: (NOTE 12) 01
25 WALL THICKNESS HEAD (mm) (NOTE 28) EXPLOSION BLAST LOAD (kPag) 100 (NOTE 33) 01
26 CORROSION ALLOWANCE (mm) 3.0 ACCELERATION TOW OUT (NOTE 9) 01
27 JOINT EFFICIENCY 1.0 WIND SPEED (m/s) (NOTE 9) 01
28 HEAD FORM QOC (Top) (Note 27) / 2:1 Elliptical (Bottom) INSULATION THICKNESS (mm) N/A
29 SEISMIC DESIGN (NOTE 9) CATHODIC PROTECTION N/A
30 SERVICES
31 SOUR SERVICE YES CAUSTIC SERVICE NO
32 HYDROGEN SERVICE NO
33 STANDARDS AND SPECIFICATIONS
34 CODE 1) ASME SEC VIII DIV 1 LATEST EDITION (NOTE 20) SPECIFICATION 1) (NOTE 37) 01
35 2) NR-13 & BV Rules 01
36
37 MATERIALS
38 SHELL SA516 Gr 70N (NOTE 24) FLANGES SA 105N
39 HEADS / QOC SA516 Gr 70N NOZZLE NECKS SA516 Gr 70N / SA106 GrB
40 CLADDING NA EXTERNAL BOLTS SA 193 B7M (Xylar/Xylan 1424)
41 LUG SUPPORT SA516 Gr 70N EXTERNAL NUTS SA 194 Gr2HM (Xylar/Xylan 1424) 01
42 EXTERNAL CLIPS SA516 Gr 70 INTERNAL BOLTS SA193-B8M
43 INTERNALS SS316L INTERNAL NUTS SA194-8M
44 GASKETS SPIRAL WOUND (Graphite filler, SS316L IR & OR) REINFORCING PADS SA 516 Gr 70N
45 LIFTING LUGS SA516 GR 70N (**) INSULATION N/A
46 NAMEPLATE SS316L (NOTE 26)
47 FABRICATION AND INSPECTION REQUIREMENTS
48 INSPECTION AUTHORITY BV (NOTE 5) DYE PENETRANT NO 01
49 POST WELD HEAT TREATMENT NO ULTRASONIC (NOTE 36) 01
50 SPECIAL HEAT TREATMENT NA PNEUMATIC TEST NA
51 RADIOGRAPHY Full RT IMPACT TESTS NO 01
52 MAGNETIC PARTICLE YES (100%) HYDRO TEST YES 01
53 MATERIAL CERTIFICATES YES (NOTE 10)
54
55 PROTECTIVE COATING DATA
56 SURFACE PREPARATION INSIDE : NA OUTSIDE : SA 2.5 (NOTE 25)
57 PAINT INSIDE : NA OUTSIDE : SYSTEM 5 (NOTE 25)
58
59
60
61
 FPSO ALMIRANTE TAMANDARE
CO2 REMOVAL PACKAGE
EQUIPMENT DATA SHEET - CARTRIDGE FILTERS

Document No: 001.17056.000028-AK007 Area(Module) TS024 Date: 28-Jun-21

Tag No.: 772-VEVF-0203 No. Req. 1 x 100% By: RSO
Operation: CO2 Removal Package Project FPSO ALMIRANTE TAMANDARE Reviewed: CCK
Services: Cartridge Filters Job No. NG20088 Approved: MAG
Revision: 01 Page: 4 of 5 REV
PRESSURE VESSEL DATA SHEET
NOZZLE CONNECTION SCHEDULE
1 NOZZLE QTY SIZE(mm) RATING FACE TYPE SERVICE REMARKS
2 N1 1 12" 600# RF WN GAS INLET
3 N2 1 12" 600# RF WN GAS OUTLET
4 N3 1 2" 600# RF LWN VENT
5 N4 1 2" 600# RF LWN LOWER DRAIN 01
6 N5 1 2" 600# RF LWN PSV (SIZE ON HOLD)
7 N6 1 2" 600# RF LWN UPPER DRAIN
8 N7 1 2" 600# RF LWN UTILITY CONNECTION
9 M1 1 24" 600# RF WN TOP COVER QOC with Swing Bolts 01
10
11
12
13
M1
14
24" 01
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59 Vessel Sketch Note:
60 (NOTE 34)
61
 FPSO ALMIRANTE TAMANDARE
CO2 REMOVAL PACKAGE
EQUIPMENT DATA SHEET - CARTRIDGE FILTERS

Document No: 001.17056.000028-AK007 Area(Module) TS024 Date: 28-Jun-2021

Tag No.: 772-VEVF-0203 No. Req. 1 x 100% By: RSO
Operation: CO2 Removal Package Project FPSO ALMIRANTE TAMANDARE Reviewed: CCK
Services: Cartridge Filters Job No. NG20088 Approved: MAG
Revision: 01 Page: 5 of 5 REV
PRESSURE VESSEL DATA SHEET
NOTES AND HOLDS
1 NOTES:
2 1. (Deleted) 01
3 2. Material of wetted parts shall meet ISO 15156 / NACE MR0175 (Part 1, 2 & 3) requirements 01
4 3. Material of wetted parts shall meet ISO 15156 / NACE MR0175 requirements.
5 4. Vessels shall comply to NR13 - Caldeiras e Vasos de Pressão (Boilers and Pressure Vessels) regulatory standard from Brazilian Labor.
6 5. Vessels shall be certified by BV according to Class rules.
7 6. All bolted internals shall be designed passing through Top cover and each individual component should have a maximum weight of 10kg.
8 7. All process nozzle shall be able to withstand the loads as per PESDMETS999009-002, MECHANICAL

UNFIRED PRESSURE VESSEL SPECIFICATION table 6.3.7-1.

9 8. Top cover shall be 24".
10 9. The vessel shall be designed for the specifed wind, motion and acceleration as per PESDPMPF999001A1, GENERAL CONDITION & DATA Rev.A2 Section 3.3 & 3.4. 01
11 10. Pressure retaining parts, load bearing parts and their attachments shall be supplied with EN10204 Type 3.1 material certificate as a minimum. 01
12 All other parts shall be supplied with Type 2.2 material certificate. 01
13 11. Manholes shall be furnished with blind flange, bolts, gaskets and davit. Each manhole shall be provided with a davit and internal manhole grip except for top projection.
14 12. The vessel is supplied with below internals:
15 a. Inlet Deflection Plate
16 b. Partition Plate with Filter Risers and Spider Plates (provided by Air Liquide)
17 13. Removable internals shall be SS 316L.
18 14. (Deleted) 01
19 15. (Deleted) 01
20 16. Corrosion allowance shall be 3mm both sides for internals made of carbon steel.
21 17. Location and load of external clips for deluge piping, platform, ladder and fire protection support cleats will be provided during detailed design.
22 18. (Deleted) 01
23 19. (Deleted) 01
24 20. Design of this pressure vessel shall be verified with ASME Sec VIII Div1 code calculation.
25 21. Access holes and vent holes shown in vessel sketch in this datasheet is general representative only.
26 22. (Deleted) 01
27 23. (Deleted) 01
28 24. (Deleted) 01
29 25. Vessel coating shall comply to PECEMCPF006005.
30 26. Quantity of nameplates are minimum two (NR13 and Project nameplate). Additional nameplate shall be agreed via submission of detail drawigs.
31 27. Swing bolt type quick opening closure (QOC) for high pressure hydrocarbon service. 01
32 28. Refer to Vessel General Arrangement Drawing 001.17056.000028-AC003. 01
33 29. Lifting lug shall be examined by 100% Magnetic Particle Inspection. 01
34 30. Maximum carbon content of welded components in carbon steels shall be limited to 0.22%. 01
35 The Maximum carbon equivalent shall be limited to 0.43% based on formula in PESDMETS999009 Rev.C1 Section 6.3.2. 01
36 31. Refer to Vessel General Arrangement Drawing 001.17056.000028-AC003 for nozzle projection information. 01
37 32. Vessel supports shall be provided with at least two earthing bosses. 01
38 33. Blast load is 1.0 barg overpressure (0.333 barg drag force) for 3 seconds. Blast loading (drag force) shall be considered as equivalent wind pressure. 01
39 34. Vessel sketch in this datasheet is only general represenative of the equipment. Always refer to General Arrangement Drawing 001.17056.000028-AC003 for details. 01
40 35. Refer to Vessel General Arrangement Drawing 001.17056.000028-AD002 for internals details. 01
41 36. UT on category C & D welds where it is impossible to perform RT. 01
42 37. List of applicable specifications: 01
43 - Topsides Pressure Vessel Specification PESDMETS999009 Rev.C1 01
44 - FPSO General Condition & Data Specification PESDPMPF999001 Rev.A2 01
45 - FPSO MAIN NR-13 Requirements Specification SWSDSWPF999003 Rev.A1 01
46 - Material & Corrosion Protection Coatings Standard PECEMCPF006005 Rev.A4 01
47 - Material & Corrosion Protection Coatings Data Sheets PECEMCPF006008 Rev.A1 01
48
49
50
51
52 HOLDS:
53 1. (Deleted) 01
54 2. PSV nozzle N5
55
56
57
58
59
60