1、Cat Fluid Info Part Number

Lubricants
2312621
Health and Safety
Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin
or respiratory irritation. Always observe good hygiene measures. Read and understand the Material Safety Data Sheet (MSDS)
before using this product. For a copy of the MSDS, visit us on the web at www.catmsds.com.
2312628
Fluid Information and Part Numbers

Cat® DEO™
Recommended Use
• Low-emission diesel engines including Cat® engines with ACERT® Technology.
• Heavy-duty diesel engines made by other manufacturers that recommend API CI-4 and CH-
4. See “Typical Characteristics” for more information.
• Automotive gasoline engines that require API SL or SJ category oils. See “Typical Charac-
teristics” for more information.
• Cat earthmoving, commercial, marine and on-highway truck diesel engines, excluding
3600, C280, 3126 and 3116 MUI Marine and MaK diesel engines. The 3116 and 3126 MUI
Marine diesel engines with closed crankcase ventilation systems should use Cat SAEO™.
Discover the Difference
• Cat DEO is developed, tested and approved by Caterpillar to meet the same high standards
as all genuine Cat parts.
• Factory-Fill - Used as standard factory-fill for Cat machines.
• Increased Engine Life - Resists oxidation and prevents build-up of deposits on pistons and
rings.
• Extended Drain Intervals - Extends oil drain intervals while providing excellent engine pro-
tection and performance when used in conjunction with our S•O•S™ Services oil analysis
program.
• Proven Performance - Tested thoroughly in Cat diesel engines including Cat engines with
ACERT Technology to ensure excellent engine life and performance.
• Long-Lasting Protection - Improved soot control and enhanced shear stability enable oil to
maintain proper viscosity for longer operating periods in Cat engines with ACERT Technol-
ogy, especially those equipped with HEUI systems.
(Continued)
733
Lubricants
2312653
Cat® DEO™ (Continued)
Typical Characteristics {A}
Location Worldwide Canada, Brazil Egypt and
Mexico and Saudi Arabia
United States
SAE Viscosity SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40
Grade
API Service CI-4, CH-4 CI-4, CH-4 CI-4 PLUS, CI- CI-4, CH-4 CI-4, CH-4 CI-4, CH-4 CI-4, CH-4
Classifications 4, CH-4
- Diesel
API Service SL SL SL SL SL SL SJ
Classifications
- Gasoline
ACEA Classifi- E5/B3/A2 E5
cations
Caterpillar ECF-2 ECF-2 ECF-2 ECF-2 ECF-2 ECF-2 ECF-2
Performance
Level
Volvo Perfor- VDS-3 VDS-2 VDS-3 VDS-3 VDS-3 VDS-2
mance Level
MB Perfor- MB228.3 MB228.3
mance Level
DDC Perfor-
mance Level
Cummins CES CES 20071/76 CES 20071/76 CES CES CES 20071/76 CES
Performance 20071/72/76/77 20071/76/78 20071/72/76/77 20071/72/76/77
Level
Mack Perfor- EO-M Plus EO-M Plus, EO-NPP, EO-M EO-M Plus, EO-M Plus EO-M Plus EO-M Plus
mance Level EO-M EO-M
MAN Perfor- M3275 3275
mance Level
RVI Perfor- RLD RLD
mance Level
{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject prod-
uct. Specifications are subject to change without notice.
(Continued)
734
Lubricants
2312666
Cat® DEO™ (Continued)
Location Worldwide Canada, Brazil Egypt and
Mexico, and Saudi Arabia
United States

Allison Perfor- C4
mance Level
Flash Point, °C 230 222 224 220 220 222 240
(ASTM D92)
Pour Point, °C -30 -36 -30 -33 -33 -36 -33
(ASTM D97)
SAE Viscosity SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40
Grade
Viscosity cSt 103 76 120.5 76 105 75 105
@ 40°C (ASTM
D445)
Viscosity 14.2 11.5 15.5 11.5 14.4 11.2 14.0
cSt @ 100°C
(ASTM D445)
Viscosity Index 135 144 135 145 141 142 135
(ASTM D2270)
Sulfated Ash, 1.3 1.3 1.3 1.3 1.1 1.1 1.2
% wt. (ASTM
D874)
TBN (ASTM 11.3 10.4 10.4 10.4 10.6 10.6 10.3
D2896)
Zinc, % wt. 0.146 0.146 0.146 0.146 0.133 0.133 0.123
(ASTM D4951)
Gravity @ 16°C 29.3 31.3 30 31.7 28.9 31.5 29
API (ASTM
D287)
Gravity @ 16°C 0.88 0.87 0.88 0.87 0.88 0.87 0.88
Specific
English Volume Metric Volume English Volume Metric Volume

(gal) (L) Qty Part Number 1 (gal) (L) Qty Part Number 1
SAE10W-30 SAE 15W-40 (Continued)
5 -- -- 3E-9709 -- 1 -- 123-4077
55 -- -- 3E-9708 -- 4 -- 3E-9902
Bulk -- -- 155-6198 -- 5 -- 3E-9901
-- 5 -- 335-9830 -- 18 -- 3E-9900
-- 18 -- 283-1709 -- 19 -- 3E-9849
-- 20 -- 3E-9844 -- 20 -- 3E-9848
-- 200 -- 130-7055 -- 60 -- 121-4038
-- 208 -- 3E-9707 -- 200 -- 3E-9842
-- 1,000 -- 148-3539 -- 205 -- 3E-9841
-- 1,004 -- 5P-2586 -- 208 -- 3E-9840
SAE 15W-40 -- 1,000 -- 3E-9838
0.250 (1 Qt.) -- 4 3E-9715 -- 1,040 -- 201-0775
1 -- -- 248-7518 -- 2,000 -- 120-5285
5 -- -- 3E-9713 -- 10,000 -- 119-5131
55 -- -- 3E-9712 -- 10,004 -- 8T-9548
Bulk -- -- 155-6199
1
Part numbers are not available in all regions. See your Cat dealer for part numbers appropriate for your region.
735
Lubricants
2312666
Cat® DEO™ Monograde
For Cat 3600 Series Diesel Engines
2312708
Recommended Use
• Cat DEO Monograde is the only oil approved by Caterpillar for use in the 3600 series diesel engines operating on distillate
diesel fuels.
• Cat DEO Monograde is recommended for older Cat engines equipped with precombustion fuel injection systems that permit
the use of American Petroleum Institute CD or CF oil.
• Cat DEO Monograde can be used with low-sulfur diesel fuel and protects Cat engines operating on higher sulfur diesel fuels
(3600 series engines operating on fuel containing up to 1.30% sulfur, and precombustion engines operating on fuel contain-
ing up to 0.065% sulfur fuel.)
• Cat DEO Monograde is developed, tested and approved by Caterpillar to meet the same high standards as all Genuine Cat
Parts.
• Factory-Fill - Used as standard factory-fill for Cat 3600 series diesel engines.
• Increased Engine Life - Resists oxidation and prevents build-up of deposits on pistons and rings.
• Extended Drain Intervals - Extends oil drain intervals while providing excellent engine protection and performance when
used in conjunction with our S•O•S™ Services oil analysis program.
• Proven Performance - Tested in Cat 3600 series diesel engines worldwide.
SAE Viscosity Grade SAE 40 {B}
API Service Classification CF {C}
CCMC D3
Caterpillar Performance Level (engine) 1M-PC
Allison Performance Level (transmission) C-3
Flash Point, °C (ASTM D92) 234
Pour Point, °C (ASTM D97) -33
Viscosity cSt @ 40°C (ASTM D445) 133
Viscosity cSt @ 100°C (ASTM D445) 13.8
Viscosity Index (ASTM D2270) 100
Sulfated Ash, % wt. (ASTM D874) 1.9
TBN (ASTM D2896) 13.0
Zinc, % wt. (ASTM D4951) 0.12
Gravity @ 16°C API (ASTM D287) 26.2
Phosphorus, % wt. (ASTM D1091) 0.11
{B} Passes FZG DIN 51354-2 A/8, 3/90 FLS 12.
{C} Can be used in applications where the obsolete API CD classification oil is recommended.
English Volume (gal) Metric Volume (L) Part Number English Volume (gal) Metric Volume (L) Part Number
SAE 40 SAE 40 (Continued)
0.250 (1 Qt.) -- 8C-3707 -- 20 7X-7843
1 -- 8C-3706 -- 200 9X-8528
5 -- 8C-3705 -- 205 7X-7842
55 -- 8C-3704 -- 1,000 9X-6272
Bulk -- 155-6202 -- 1,200 203-1044
-- 18 9X-2004 -- 2,000 119-5134
-- 19 9X-8529 -- 10,000 119-5133
-- 10,004 8C-3703
736
Lubricants
2312754
Cat® DEO-ULS™ Cold Weather
Best Performance and Protection for Cold Weather Applications
Cat® DEO-ULS™ Cold Weather is a synthetic diesel engine oil designed with an extremely stable
formula tailored to provide long-lasting engine protection over a wide temperature range, -40°F

(-40°C) to 104°F (40°C). The backwards compatibility of Cat DEO-ULS Cold Weather makes it
well suited for mixed fleets of new and old machines. When used in engines equipped with
emissions reduction technologies, Cat DEO-ULS Cold Weather delivers the full life and perfor-
mance of aftertreatment components. Cat DEO-ULS Cold Weather exceeds the performance
requirements of Cat ECF-3 (Engine Crankcase Fluid Specification) and the API CJ-4 and API SM
categories.
Cat DEO-ULS Cold Weather takes the trouble out of starting your engine when temperatures are
very low. The special formulation flows readily at low temperatures, reducing startup wear and
improving fuel economy in some applications. The outstanding thermal stability and oxidation
resistance of Cat DEO-ULS Cold Weather keeps engine components cleaner, further reducing
wear. In testing, Cat DEO-ULS Cold Weather was shown to reduce piston deposits by more than
30% and to have more than 80% better viscosity control than ECF-3 standards. These results
demonstrate that Cat DEO-ULS Cold Weather will help lower your owning and operating costs
through fewer oil changes and repairs.
Benefits
• Easier Engine Starts - Excellent low temperature performance eliminates hard starts
• Reduced Engine Wear - Improved detergents keep engine components cleaner
• Minimized Deposits - Reduced oxidation breakdown and thermal degradation improves
stability which minimizes the formation of deposits, sludge and varnish
• Full Component Life - Specially designed additives deliver superior engine protection while
supporting consistent emissions performance and extending the life of after treatment
system components
• Extended Drain Intervals - When regular S•O•S™ Oil Analysis is utilized, long oil life is pos-
sible
Applications
Cat DEO-ULS Cold Weather is the preferred diesel engine oil for low temperature applications. 1
Cat DEO-ULS Cold Weather supports consistent emissions performance in engines equipped
with aftertreatment devices designed to meet: 2
• 2007 / 2010 On-Highway exhaust emissions standards (US)
• Tier 4 (US)
• Stage IIIB/IV (EU)
• Step 4 (Japan)
Cat DEO-ULS is an excellent choice for mixed fleets because it can be used in heavy-duty diesel
engines built by manufacturers that recommend API CJ-4, CI-4 PLUS/CI-4 or CH-4 classification
oil as well as automotive gasoline engines that recommend API SM classification oil.
(Continued)
737
Lubricants
2312754
Cat® DEO-ULS™ Cold Weather (Continued)
SAE Viscosity Grade 0W-40
API Service Classification Diesel: CJ-4, CI-4 PLUS/CI-4, CH-4; Gasoline:
SM
OEM Performance Cat ECF-3, Cummins CES 20081, Mack EO-N
PP ‘03
Viscosity cST @ 40°C (ASTM D445) 87
Viscosity cST @ 100°C (ASTM D445) 15.2
Viscosity Index (ASTM 2270) 186
Phosphorous, %wt. (ATM D4951) 0.111
Sulfated Ash, %wt. (ASTM D874) 0.99
Sulfur, %wt. (ASTM D2622) 0.4
TBN (ASTM D2896) 7.8
Zinc, %wt. (ASTM D4951) 0.121
Specific Gravity @ 16°C 0.844
{A} The values shown are typical values and should not be used as quality control parameters
to either accept or reject product. Specifications are subject to change without notice.
SAE 0W-40 SAE 0W-40 (Continued)
-- 5 347-8468 1 -- 347-8472
-- 20 347-8469 5 -- 347-8473
-- 205 347-8470 55 -- 347-8474
-- Bulk 347-8471 -- 4 361-0922
-- 4 361-0923
1
Oil recommendations for 3116 and 3126 MUI Marine and MaK diesel engines can be found in the Operations & Maintenance Manual (OMM).
2
Aftertreatment devices can include Diesel Particulate Filters (DPF), Diesel Oxidation Catalyst (DOC), Selective Catalytic Reduction (SCR) and/
or Lean NOx Trap (LNT).
2312781
Cat® DEO-ULS™
(For the United States, Canada, and Mexico only)
Recommended Use
• Cat DEO-ULS exceeds the performance requirements of Cat ECF-3 (Engine Crankcase Fluid
Specification) and API CJ-4.
• Preferred for all 2007 on-highway and non-road Tier 4 U.S. EPA engines equipped with after
treatment systems using 15-ppm sulfur fuel.
• May also be used with engines not equipped with aftertreatment systems using 1000-ppm
(or less) sulfur fuel without affecting the oil change interval.
• Cat DEO-ULS is developed and tested to provide superior protection and life for Cat en-
gines.
• Better Detergents - Protect against piston and ring groove deposits.
• Advanced Additive Package - Improves protection of the engine and the Diesel Particulate
Filter (DPF).
• Enhanced Dispersants - Provide better soot-related viscosity control, prevents viscosity
loss from shearing and reduce oil consumption.
• Improved Protection from Thermal and Oxidative Breakdown - Withstands higher sump
temperatures while offering low-temperature pumpability.
(Continued)
738
Lubricants
2312805
Cat® DEO-ULS™ (Continued)
(For the United States, Canada, and Mexico only)
SAE Viscosity Grade SAE 15W-40 SAE 10W-30

API Service Classification - Diesel CJ-4, CI-4 PLUS/CI-4, CH-4
API Service Classification - Gasoline SM/SL
Caterpillar Performance Level ECF-3 ECF-3
Volvo Performance Level VDS-4/VDS-3 VDS-4/VDS-3
ACEA Performance Level E9-08/E7-04 E9-08/E7-04
Cummins Performance Level CES 20081
Mack Performance Level EO-O Premium Plus
DDC Performance Level PGOS 93K218
Flash Point, °C (ASTM D92) 236 230
Pour Point, °C (ASTM D97) -30 -27
Viscosity cSt @ 40°C (ASTM D445) 114 79
Viscosity cSt @ 100°C (ASTM D445) 15.0 11.9
Viscosity Index (ASTM D2270) 137 145
Sulfated Ash, % wt. (ASTM D874) 0.98 0.97 (ASTM D4739)
TBN (ASTM D2896) 10.4 8.2
Phosphorus, % wt. (ASTM D4951) 0.100 0.100
Sulfur, % wt. (ASTM D2622) 0.3 0.3
Gravity @ 16°C Specific 0.876

(gal) (L) Qty Part Number (gal) (L) Qty Part Number
SAE 15W-40 Cat DEO-ULS 10W-30
1 -- -- 291-3866 1 -- 4 317-3081
5 -- -- 291-3868 5 -- -- 317-3083
55 -- -- 291-3869 55 -- -- 317-3084
Cat DEO-ULS 15W-40 -- 1 -- 341-0729
-- 1 -- 300-7914 -- 20 -- 308-1476
-- 20 -- 300-7915 -- 208 -- 317-3085
-- 208 -- 301-2233 -- 5 -- 368-4792
-- 5 -- 368-4791 -- Bulk -- 346-0465
-- Bulk -- 335-2491
-- Bulk -- 349-2581
2312826
Cat® NGEO™
Recommended Use
• Designed for engines using gaseous fuels.
• Compatible with exhaust catalyst applications that require a low-phosphorus oil.
• Provides optimum engine and oil life with low-sulfur gaseous fuels that contain less than
0.43 mg hydrogen sulfide per mega Joule (0.35 mg hydrogen sulfide per BTU).
• Cat NGEO is formulated from select base stocks blended with special additives to provide
an economical engine oil for natural gas applications. Cat NGEO is developed, tested and
approved by Caterpillar to meet the same high standards as all Genuine Cat Parts.
(Continued)
739
Lubricants
2312826
Cat® NGEO™ (Continued)
• High-Endurance Lubrication - Performs throughout the long oil change intervals common
for gaseous fuel engines.
• Reduced Piston and Cylinder Wear - Anti-oxidation and anti-nitration properties prevent
carbon deposit buildup to minimize scuffing, scoring and wear.
• Increased Valve Life - Protects against damage to guide faces and seals.
• Corrosion Protection - Neutralizes acids to prevent rust and copper corrosion.
• High-Temperature Performance - Provides excellent thermal stability and resists foaming
and sludge formation.
SAE Viscosity Grade SAE 40
Gravity, API 27.5
TBN, mg KoH/g (ASTM D2896) 6.2
Phosphorus, % wt. (Spectro or AA) 0.030
Calcium, % wt. (Spectro or AA) 0.125
-- 19 121-0327 -- 208 105-3336
-- 200 197-6911 -- 209 166-3491
-- 205 9X-8527 -- 1000 159-8156
2312858
Cat® NGEO EL250™
Applications
• For natural gas engines and other engines requiring low ash oil.
Features
• Increased detergent concentration and acid neutralizing capability to assure less lacquer and deposits on pistons and
valves.
• Control of sludge formulation.
• Outstanding resistance to oil nitration and oxidation.
Benefits
• Improves ring and liner service life.
• Increased soot-handling capability.
• Protection against valve guide face and seat damage, piston scuffing, scoring and piston/cylinder wear, foam and corrosion
damage, and piston carbon deposits.
Drain Recommendations
G3400 - 1000 hrs
G3500 - 1250 hrs
G3600 - 6000 hrs
English Volume (gal) Metric Volume (L) Part Number
SAE 40
-- 20 216-9221
-- 208 216-9224
-- Bulk 7X-2426
740
Lubricants
2312890
Cat® NGEO EL350™
Recommended Use
• Provides superior lubrication in high-horsepower gaseous-fueled engines.
• Compatible with exhaust catalyst applications that require a low-phosphorus oil.

• Compatible with “lean burn” engines requiring low-ash oil.
• Provides optimum engine and oil life with low-sulfur gaseous fuels that contain less than
0.43 mg hydrogen per mega Joule (0.35 mg hydrogen sulfide per BTU).
• May be used in engines that use high-sulfur gas or bio-gas, provided that shorter drain
intervals are employed.
• Cat NGEO EL350 is developed, tested and approved by Caterpillar to meet the same high
standards as all genuine Cat parts.
• Factory-Fill - Used as standard factory-fill for Cat natural gas engines.
• Reduced Piston and Cylinder Wear - Anti-oxidation and anti-nitration properties prevent
deposit buildup to minimize scuffing, scoring and wear.
• Increased Spark Plug and Valve Life - Excellent detergent and dispersant additives protect
against deposits and damage.
• Corrosion Protection - Acid neutralizers protect parts from rust and copper corrosion.
• Extended Drain Intervals - Provide extended oil drain capabilities when used in conjunction
with our S•O•S™ Services oil analysis program.
Drain Recommendations
G3400 - 2000 hrs
G3500 - 2000 hrs
G3600 - 8000 hrs
Gravity @ 16°C, API (ASTM D287) 29.3
Gravity @ 16°C, Specific 0.882
TBN, mg KoH/g (ASTM D2896) 6.2
Phosphorus, % wt. (Spectro or AA) 0.03
Calcium, % wt. (Spectro or AA) 0.13
5 -- 225-5082 -- 20 225-5084
55 -- 225-5083 -- 205 269-1971
Bulk -- 272-3217 -- 208 225-5085
-- 1000 249-2309 -- Bulk 283-0781
741
Lubricants
2312926
Cat® TDTO™
Recommended Use
• Preferred lubricant for Cat power shift transmissions, most final drives and wet brake
compartments.
• Cat machine compartments where TO-4 and TO-4M specification oils are recommended.
• Other manufacturers’ machines that recommend TO-4 or TO-4M or specification oils for
their transmissions, final drives and wet brake compartments.
• Cat TDTO is developed, tested and approved by Caterpillar to meet the same high stan-
dards as all genuine Cat parts.
• Factory-Fill - Used as standard factory-fill for Cat machine compartments where TO-4 oils
are specified.
• Longer Clutch Life - Prolongs clutch disc life up to 45%.
• Optimum Wear Life - Ensures long life and excellent performance for gears, bearings and
friction disc material.
• System-Matched Formula - Engineered as an integral part of Cat power shift transmis-
sions, most wet brake compartments, and Hydrostatic Systems.
SAE Viscosity Grade SAE 10W SAE 30 SAE 50
Caterpillar Test TO-4 TO-4 TO-4
Allison Test C-4 C-4 C-4
ISO Viscosity Grade 46 100 220
Flash Point, °C (°F) 202 (395) 224 (435) 240 (464)
(ASTM D92)
Pour Point, °C (°F) -33 (-27) min. -18 (0) min. -15 (5) min.
(ASTM D97)
Viscosity cP @ -25°C 6840
(ASTM D5293)
Viscosity cSt @ 40°C 42.0 100 195
(ASTM D445)
Viscosity cSt @ 100°C 6.3 11.2 18.0
(ASTM D445)
Viscosity Index (ASTM 97 97 96
D2270)
Sulfated Ash, % wt. 1.2 1.2 1.2
(ASTM D4951)
TBN (ASTM D2896) 7.9 7.9 7.9
Zinc, % wt. (ASTM 0.127 0.127 0.127
D4951)
Gravity API (ASTM 29.7 27.0 24.7
D287)
Phosphorus, % wt. 0.110 0.110 0.110
(ASTM D4951)
Calcium, % wt. .298 .298 .298
(Continued)
742
Lubricants
2312926
Cat® TDTO™ (Continued)
SAE 10W SAE 30 (Continued)

5 -- -- 8T-9568 -- 20 -- 7X-7855
55 -- -- 8T-9569 -- 200 -- 7X-2888
Bulk -- -- 155-6212 -- 205 -- 7X-7854
-- 5 -- 100-7019 -- 208 -- 9X-6466
-- 19 -- 145-0995 -- 1000 -- 7X-7611
-- 20 -- 7X-7852 -- Bulk -- 2P-9869
-- 25 -- 9X-8525 SAE 50
-- 200 -- 112-2866 5 -- -- 8T-9576
-- 205 -- 7X-7851 55 -- -- 8T-9577
-- 208 -- 103-2528 Bulk -- -- 155-6214
-- 209 -- 123-3104 -- 5 -- 9X-8443
-- 1000 -- 166-0393 -- 18 -- 9X-2012
-- Bulk -- 3P-0659 -- 19 -- 9X-8531
SAE 30 -- 20 -- 7X-7858
1 -- 4 248-7521 -- 200 -- 9X-8530
5 -- -- 8T-9572 -- 205 -- 7X-7857
55 -- -- 8T-9573 -- 208 -- 3E-9478
Bulk -- -- 155-6213 -- 1000 -- 7X-7612
-- 5 -- 9X-6467 -- Bulk -- 5P-1228
-- 18 -- 9X-2010
-- 19 -- 9X-8469
2312992
Cat® TDTO-TMS™
Recommended Use
• Cat transmissions, wet brakes and hydraulic compartments that must operate in wide
temperature ranges.
• Cat machine compartments where TO-4 and TO-4M specification oils are recommended.
• Other manufacturers’ machines that recommend TO-4 or TO-4M specification oils for their
transmissions, final drives and wet brake compartments.
• Cat TDTO-TMS is a proprietary formulation that was specifically developed, tested and
approved by Caterpillar to ensure peak performance in your transmission and to meet the
same high standards as all genuine Cat parts.
• Longer Component Life - Reduces wear on transmission gears.
• Improved Cold-Weather Performance - Improves performance and efficiency of transmis-
sions in cold weather, especially for machines with electronic controls.
• Optimum Wear Life - Ensures long life and excellent performance for gears, bearings and
friction disc material.
• Fewer Oils, Fewer Changes - Can be used in multiple compartments with extended drain
intervals over multiple seasons.
(Continued)
743
Lubricants
2312992
Cat® TDTO-TMS™ (Continued)
SAE Viscosity Grade Multi-Viscosity
Caterpillar Test TO-4M, TO-4
Allison Test C-4

Gravity, API (ASTM D287) 29.2
Flash Point, °C (°F) (ASTM D92) 222 (432)
Pour Point, °C (°F) (ASTM D97) -39 (-38)
TBN (ASTM D2896) 8.4
Zinc, % wt. (ASTM D4951) 0.127
Calcium, % wt. .298
KRL Shear Stability 10.0%
Multi-Viscosity Multi-Viscosity (Continued)
5 -- 154-0195 -- 20 154-0196
55 -- 154-0194 -- 208 154-0197
Bulk -- 154-0192 -- Bulk 154-0193
2313021
Cat® TDTO™ Cold Weather
Best Performance and Protection for Cold Weather Applications
Cat TDTO Cold Weather is a synthetic blend lubricant that provides superior performance and
protection in transmissions, torque converters, final drives, hydraulics and/or wet brakes at tem-
peratures down to -40°F (-40°C). The special formulation creates optimal friction performance
and controls transmission slippage while eliminating clutch glazing. Cat TDTO Cold Weather
has excellent compatibility with all materials used in Cat machines, including friction materials,
seals and elastomers. The outstanding thermal stability and oxidation resistance gives Cat TDTO
Cold Weather long drain intervals.
Benefits:
Performance
• Easier Engine Starts
• Greater Machine Rim Pull and Breakout Force
• Long Drain Intervals
Protection
• Promotes Transmission Durability
• Increased Clutch, Gears and Bearing Life
• Optimal Cold Weather Friction Performance
Applications
Cat TDTO Cold Weather is the preferred transmission and drive train oil for low temperature op-
eration in certain applications and can be used in wet brakes and hydraulics. Refer to SEBU6250
for more information.
Cat TDTO Cold Weather is also recommended for applications with the following original equip-
ment manufacturer requirements:
• Cat TO-4
• Allison C-4
• Komatsu Micro-Clutch
(Continued)
744
Lubricants
2313021
Cat® TDTO™ Cold Weather (Continued)
• Vickers 35VQ25
Long Drain Intervals
With the use of Cat S•O•S™ Oil Analysis and Cat Filters, Cat TDTO Cold Weather is capable of
long change intervals.

SAE Viscosity Grade 0W-20
Gravity @ 16°C (60°F)
Gravity @ API (ASTM D287) 30.8
Specific Gravity .872
Flash Point @ °C (ASTM D92) 170
Pour Point @ °C (ASTM D97) -54
Kinematic Viscosity (ASTM D445)
cSt @ 40°C 32.9
cSt @ 100°C 7.5
Brookfield Viscosity (ASTM D2983)
cP @ -40°C 7000
Total Base Number (TBN) (ASTM D664) 7.9
Low Temperature Pumpability @ °C (ASTM -54
D4684)
Phosphorus, ppm 1060
Zinc, ppm 1250
Calcium. ppm 3000
Sulfated Ash, % wt. 1.2

-- 4 4 341-1949 -- 205 -- 228-6070
-- 4 1 332-8851 Bulk -- -- 301-4523
-- 20 -- 228-6069
2313053
Cat® SAEO™
Recommended Use
• Cat Special Application Engine Oil is the only oil approved by Caterpillar for use in the 3116
and 3126 Marine Diesel Engines with mechanical unit injection and a closed crankcase
ventilation system. This system circulates blowby gases from the engine crankcase to the
turbocharger inlet. These blowby gases can form harmful deposits in the turbocharger and
the aftercooler. Cat Special Application Engine Oil is designed to reduce or eliminate the
formation of these harmful deposits. 1
• Stops the buildup of deposits in the turbocharger compressor and the aftercooler that can
reduce power and cause an increase in smoke.
• Maintains stable oil consumption within the specified oil change interval and from one
interval to the next.
• Stabilizes functional chemistry throughout each service interval.
• Stops the buildup of deposits on pistons and rings that can increase oil consumption.
• Helps to eliminate the formation of deposits on pistons that are abrasive enough to polish
the hone pattern from the surface of the liners.
• Prevents the clumping of soot particles that can cause an abnormal increase in viscosity,
piston deposits, or sludge.
(Continued)
745
Lubricants
2313053
Cat® SAEO™ (Continued)
SAE Viscosity Grade SAE 30 SAE 40
Manufacturer 1K 1K
Manufacturer C4
Flash Point, °C (ASTM D92) 232 232
Pour Point, °C (ASTM D97) -23 -18
Viscosity cSt @ 100°C (ASTM 11.0 14.0
D445)
Sulfated Ash, % wt. (ASTM 0.9 0.9
D874)
TBN (ASTM D2896) 6.5 6.5
Zinc, % wt. (ASTM D1549) 0.12 0.12
Phosphorus, % wt. (ASTM 0.10 0.10
D1091)
SAE 30 SAE 40
1 -- 170-5262 1 -- 170-5261
5 -- 198-7368 5 -- 198-7369
Bulk -- 161-5824 -- 20 7X-7840
-- 20 9X-6462 -- 208 7X-7843
-- 208 9X-6463
1
Cat SAEO should not be used in 3406, 3126, C-10, C-12, or 3116 low emission on-highway truck engines. Use Cat DEO multi-grade oils.
2313083
Cat® FDAO™
Recommended Use
• Preferred lubricant for Cat Off-Highway Truck front wheels, differentials and final drives.
• Preferred lubricant for Cat Large Track-Type Tractor, Pipelayer, and Track Skidder final
drives (steel-tracked machines with elevated final drives except the D5M, D6M and 561M).
• Compatible with Cat final drives and axles that previously specified TO-4 lubricants and do
not contain friction material.
• Cat FDAO is developed, tested and approved by Caterpillar to meet the same high stan-
dards as all genuine Cat parts.
• Factory-Fill - Used as standard factory-fill for Cat Off-Highway Trucks and Large Track-Type
Tractors.
• Extended Drain Intervals - Allows for double-length drain intervals in off-highway truck
final drives, as compared to TO-4 commercial oils.
• Minimal Foaming - Formulated to protect against the damaging effects of air.
(Continued)
746
Lubricants
2313083
Cat® FDAO™ (Continued)
ISO Viscosity Grade 320

Caterpillar Test FD-1
Gravity, 16°C API (ASTM D287) 25.9
Gravity, 16°C Specific .899
Pour Point, °C (°F) (ASTM D97) -15 (5)
Viscosity cP @ -10°C (ASTM D2983) 75,000
Copper Strip (ASTM D130, 2 hrs @ 100°C) 1A
5 -- 184-6022 -- 200 198-7672
55 -- 184-6021 -- 205 201-9855
Bulk -- 184-6020 -- 208 184-8056
-- 18 206-5210 -- 1000 221-3445
-- 20 184-8055 -- 1200 202-9753
-- Bulk 184-8054
2313116
Cat® FDAO SYN™
Recommended Use
• Preferred lubricant for Cat Off-Highway Truck and D11R carrydozer front wheels, differen-
tials and final drives operating under high load factors.
• Compatible with Cat final drives and axles that previously specified Cat FDAO or TO-4 lubri-
cants and do not contain friction material.
• Cat FDAO SYN is developed, tested and approved by Caterpillar to meet the same high
• Extended Drain Intervals - Extend drain intervals up to a factor of three in off-highway truck
final drives, as compared to Cat TDTO and TO-4 oils.
• Minimal Foaming - Formulated to protect against the damaging effects of air.
• Longer Bearing and Gear Life - Has demonstrated the capability to double bearing life and
quadruple gear life when compared to TDTO and T0-4 oils used in off-highway truck final
drives.
(Continued)
747
Lubricants
2313116
Cat® FDAO SYN™ (Continued)
SAE Viscosity Grade Multigrade
ISO Viscosity Grade 320
Caterpillar Test FD-1

Gravity, 16°C API (ASTM D287) 33.4
Flash Point, °C (°F) (ASTM D92) 246 (474) min.
Copper Strip (ASTM D130, 2 hrs @ 100°C) 1A
Multi-Viscosity Multi-Viscosity (Continued)
5 -- 208-2390 -- 208 206-5212
55 -- 198-7450
-- 18 206-5211
2313141
Cat® Bio HYDO™ Advanced
High Performing, Environmentally Friendly
Cat® Bio HYDO™ Advanced is an environmentally friendly hydraulic fluid that has the drain interval of premium mineral-based
oil. Developed for use in any environment, Cat BIO HYDO Advanced provides superior performance across a wide temperature
range and many applications, including: Construction, Forestry, Dredging, Ports, and Tunnel Boring.
Benefits:
Environmentally Friendly
• Non-toxic formula
• Readily biodegradable
• EU Flower eco-label certified
Extended Drain Intervals
• Excellent oxidation stability
• Comparable to premium mineral-based hydraulic oils
Exceptional System Protection
• Superior wear protection
• Corrosion resistance
• Fast air release
Features
• Long Life - Cat Bio HYDO Advanced outperforms the previously recommended Cat Bio HYDO and competitive brands. In
fact, Cat Bio HYDO Advanced performance is comparable to premium mineral-based hydraulic oils. Like Cat HYDO Ad-
vanced, Cat Bio HYDO Advanced can be taken up to a 6,000 hour drain interval with Cat S•O•S™ Fluid Analysis.
• Biodegradable - readily biodegradable and non-toxic, so that it can be used in environmentally sensitive areas without
concern.
• Wide temperature Range Protection - maintains consistent wear protection throughout the entire temperature range, -22°F
(-30°C) - 113°F (45°C). From cold start through to operating temperature, Cat Bio HYDO Advanced gives you the best system
protection.
• Improved Flow Through Filters - retains its ability to flow through filters even when water is present.
• Seal Compatibility - Cat Bio HYDO Advanced is highly compatible with the seals used in Cat Hydraulic systems. This means
fewer leaks and lower maintenance costs.
(Continued)
748
Lubricants
2313141
Cat® Bio HYDO™ Advanced (Continued)
• Component Protection - specially developed additives form a protective layer on wear surfaces, reducing wear in hydraulic
pumps and other components. Cat BIO HYDO Advanced provides excellent corrosion protection to steel and bronze compo-
nents, even at high temperatures.

Cat Bio HYDO Advanced Typical Characteristics {A}
Characteristics Cat Bio HYDO Advanced Typical Environmentally Typical Premium Indus- Benefits of Cat Bio
(HEES) Friendly Synthetic Ester trial Hydraulic Oil {B}, HYDO Advanced
HEES Hydraulic Oil {B} HVLP {B}, HV {B}
Oxidation Stability Test, More than 3,000 hrs Less than 500 hrs (Dry) 2,000 hrs Long Drain Interval Rre-
ASTM D493 (Longer is (Dry) sults in Reduced Owning
better) & Operating Cost
Long Drain Interval Yes No No ““
Capability
Suitable for use in En- Yes Yes No Low Environmental
vironmentally Sensitive Impact
Areas
Renewable Content, >80% >50% None ““
ASTM D6866
Viscosity at 100°C, 8.6 cSt 8.1 - 9.0 cSt 8.0 cSt Excellent Wear Protec-
ASTM D445 tion and Wide Operating
Temperature Range
Viscosity at 40°C, ASTM 44.3 cSt 46 cSt 46 cSt Cat Bio HYDO Advanced
D445 is Recommended for
Ambient Temperatures
from -30°C to +45C
Viscosity Index, ASTM 176 150-180 140 ““
D2270 (Higher is Better)
{C}
Viscosity at 100°C, 8.6 cSt 9 cSt 6.6 cSt ““
ASTM D445 During Use
After Shear {C}
Pour Point, ASTM D 97 -45°C -36°C -36°C ““
Brookfield Viscosity at 1,227 cP 2,500 cP 2,500 cP ““
-20°C ASTM D2983
Brookfield Viscosity at 3,039 cP -- -- ““
-30°C ASTM D2983
{A} The values shown here are typical values and should not be used as quality control parameters to either accept or reject
product. Specifications are subject to change without notice.
{B} Not recommended for use in Cat Hydraulic systems.
{C} High Viscosity Index oils containing viscosity modifier additives will become thinner during use, this will reduce the level of
protection.
(Continued)
749
Lubricants
2313169
Cat® Bio HYDO™ Advanced (Continued)
Cat Bio HYDO Advanced Typical Characteristics {A} (Continued)
Characteristics Cat Bio HYDO Advanced Typical Environmentally Typical Premium Indus- Benefits of Cat Bio
(HEES) Friendly Synthetic Ester trial Hydraulic Oil {B}, HYDO Advanced
HEES Hydraulic Oil {B} HVLP {B}, HV {B}

FZG Gear Test, DIN >12 12 11 Excellent Wear Protec-
51534, Fail Stage (Higher tion and Wide Operating
is better) {D} Temperature Range
4-Ball Wear Test, ASTM 0.35 mm -- -- Cat Bio HYDO Advanced
D4172 is Recommended for
Ambient Temperatures
from -30°C to +45C
35VQ25 Total Wear, mg 25 mg <90 mg <90 mg ““
(Lower is better)
Air Release at 50°C 1 minute 7 min - 13 min 7 min - 13 min Faster Air Release
(ASTM D3427) (Lower is Reduces Cavitation
better) Damage
Copper Strip Corrosion, 1A at 150°C 1B at 100°C 1B at 100°C Best in Class Corrosion
ASTM D130, 3 Hours (1A Protection
is better than 1B, 1A at
150°C is better than 1A
at 100°C)
Corrosion Protection, Pass Pass Pass ““
ASTM D665B
{A} The values shown here are typical values and should not be used as quality control parameters to either accept or reject
product. Specifications are subject to change without notice.
{B} Not recommended for use in Cat Hydraulic systems.
{D} In addition to high FZG rating, the oil must demonstrate excellent protection to hydraulic pumps and motors, excellent corro-
sion protection and compatibility with metal and seals.
2313176
Cat® HYDO™ Advanced 10
6,000 Hour Extended Drain Intervals
Cat is introducing a new hydraulic oil to the fluid product line, Cat HYDO Advanced 10. This new
oil is a combination of premium additives and specially selected and controlled higher quality
base oils designed to provide extended drain intervals and extra protection to hydraulic system
components.
Cat HYDO Advanced 10 represents a significant performance breakthrough in hydraulic oil
technology. This oil has been developed with an optimized formulation that has been subjected
to severe qualification testing in the field and laboratory for thousands of hours. The result is the
best product available for Cat hydraulic systems.
Features & Benefits
• 6,000 hour extended drain intervals - up to the hours of Cat HYDO 10W when monitored
with Cat S•O•S™ Services oil analysis program-every 500 hours. Reduces owning and
operating costs and increases uptime.
• Enhances long lasting anti-wear protection - specially developed additives form a protec-
tive layer on the wear surfaces, reducing component wear in high-pressure piston, vane
and gear hydraulic pumps.
• Holds water in dispersion - contains emulsifiers specially designed to disperse water. Cat
does not recommend oils that “separate,” “shed” or “release” water. Separated water
drawn through the hydraulic system can damage pumps and other components. If this
water freezes, it can cause serious damage.
• Backward compatibility - the only hydraulic oil you need to stock for your maintenance
operations. Preferred fill for Cat equipment.
(Continued)
750
Lubricants
2313176
Cat® HYDO™ Advanced 10 (Continued)
• Improved filtration properties - special detergent dispersants keep components clean and
improve transport of contaminants through the filters. Compatible with Cat Ultra High Ef-
ficiency filters.
• Improved corrosion protection - protects metal surfaces from rust. Better corrosion pro-

tection than most oils in the Cat line-up.
• Faster air release - rapid air separation reduces air release time, preventing cavitation, Cat
HYDO Advanced 10 air release time of less than 4 minutes is far superior compared to Cat
HYDO 10W at 7-10 minutes air release time (per ASTM D3427 testing).
• Wide temperature range protection - maintains consistent wear protection at both cold
and hot temperatures. Designed to flow readily at cold temperature start up, and maintains
excellent wear protection at operating temperatures.
• Improved oil stability - 250% increase in oxidation stability per ASTM D943. Improved oil
stability and wear protection make Cat HYDO Advanced 10 last longer.
(Continued)
751
Lubricants
2313176
Cat HYDO Advanced 10 Typical Characteristics {A}
Characteristics HYDO Advanced Typical Diesel Typical Premium HYDO Advanced
10 Engine Oil API CF Industrial Hydrau- 10 Advantages
SAE 10W lic Oil, HVLP or HV

SAE Viscosity 10W 10W Varies
Grade
Viscosity
cSt @ 40°C 42 40 46 Better wear
(ASTM D445) protection, wider
operating tem-
perature range
cSt @ 100°C 6.7 6.3 8.0 ““
(ASTM D445)
Viscosity Index 114 105 146 ““
(ASTM D2270)
Viscosity after 6.7 6.3 6.6 ““
Shear (cSt, during
use) {B}
FZG Gear Test 12 12 11 ““
DIN 51534, Fail
Stage {C}
35VQ25 Vickers 33 mg 40-90 mg <90 mg ““
Total Wear Test
4 Ball 0.37 mm Varies Varies ““
(40kg/30min/
600rpm/93°C
ASTM D4172)
Pour Point, °C -39 -30 -36 ““
(ASTM D97)
Pumping @ -30°C 15,000 Varies Varies ““
mPaS (ASTM
D4684)
Zinc, % wt. 0.090 Varies <0.040 ““
(ASTM D4951)
typical
Copper Strip 1A @ 150°C 1A @ 100°C 1A @ 100°C Corrosion protec-
Corrosion (3 hr, tion
ASTM D130) {D}
{B} Oils that contain viscosity modifier additives will become thinner during use in this ma-
chine. This will reduce protection level.
{C} Higher is typically better, but too much active antiwear additives may lead to reduced
component life.
{D} 1A is better than 1B, 1A at 150º C is better than 1A at 100º C.5
(Continued)
752
Lubricants
2313200
Cat HYDO Advanced 10 Typical Characteristics
Characteristics HYDO Advanced 10 Typical Diesel Engine Oil Typical Premium Indus- HYDO Advanced 10
API CF SAE 10W trial Hydraulic Oil, HVLP Advantages

or HV
Rust Protection (ASTM Pass Varies Varies Corrosion protection
D665B) {E}
Oxidation stability, hours >5,000 2,000 hours 2,000 hours Long Drain Interval,
(ASTM D943) lower owning and oper-
ating costs
Long Drain Interval, con- Yes No No ““
firmed by field testing
Filterability, Wet, E DIN Pass Fail Pass Reduced filter plugging
ISO 13357-1 improves contamination
control, due to better
filtration
Air Release @ 50°C 4 minutes 7-10 minutes 7-13 minutes Better air release reduc-
(ASTM D3427) es cavitation damage
Foam Test {F} Varies Varies ““
Seq.1 ml. (ASTM D892) 0/0 ““
Seq.2 ml. (ASTM D892) 5/0 ““
Seq.3 ml. (ASTM D892) 0/0 ““
Cleanliness No interference with Interferes with optical Varies Accurate contamination
optical particle counters particle counters control
Ability to keep water in Yes Yes No Sludge control and wa-
emulsion ter damage prevention
{E} May be difficult to pass with 10W engine oils.
{F} New oil, as received, with 0.1% water by volume added.
English Volume Metric Volume Package English Volume Metric Volume Package
(gal) (L) Quantity Part Number (gal) (L) Quantity Part Number
1 -- 4 309-6932 -- 60 -- 309-6941
5 -- -- 309-6931 -- 200 -- 309-6940
55 -- -- 309-6930 -- 205 -- 309-6939
Bulk -- -- 314-5168 -- 208 -- 309-6938
Bulk Railcar -- -- 309-6929 -- 1,000 -- 309-6937
-- 5 -- 309-6945 -- 2,000 -- 309-6936
-- 18 -- 309-6944 -- 10,000 -- 309-6935
-- 19 -- 309-6943 -- 15,000 -- 309-6934
-- 20 -- 309-6942 -- 15,004 -- 314-5169
2313211
Cat® HYDO™ Advanced 30
6,000 Hour Extended Drain Intervals
Caterpillar is introducing a new Cat® HYDO Advanced 30 hydraulic oil to the fluid product line. Cat HYDO Advanced 30 compli-
ments the recently introduced Cat HYDO Advanced 10. These new oils are a combination of premium additives and specially
selected and controlled higher quality base oils designed to provide extended drain intervals and extra protection to hydraulic
system components.
Cat HYDO Advanced 30 and 10 represent a significant performance breakthrough in hydraulic oil technology. These oils have
been developed with an optimized formulation that has been subjected to severe qualification testing in the field and laboratory
for thousands of hours. The result is the best product available for Cat machine hydraulic systems.
Cat HYDO Advanced 30 is an oil specifically formulated for working in consistently hot climates with temperatures ranging above
40°C (104°F).
Features & Benefits
(Continued)
753
Lubricants
2313211
• 6,000 hour extended drain intervals – up to triple the hours of Cat® HYDO 30 when monitored with Cat® S•O•S™ Services oil
analysis program-every 500 hours. Reduces owning and operating costs and increases uptime.
• Enhances long lasting anti-wear protection – specially developed additives form a protective layer on the wear surfaces,
reducing component wear in high-pressure piston, vane, and gear hydraulic pumps.
• Holds water in dispersion – contains emulsifiers specifically designed to disperse water. Cat does not recommend oils that
“separate,” “shed,” or “release” water. Separated water drawn through the hydraulic system can damage pumps and other
components. If this water freezes, it can cause serious damage.
• Backward compatibility – the only hydraulic oil you need to stock for your maintenance operations. Preferred fill for Cat
equipment.
• Improved filtration properties – special detergent dispersants keep components clean and improve transport of contami-
nants through the filters. Compatible with Cat Ultra High Efficiency filters.
• Improved corrosion protection – protects metal surfaces from rust. Better corrosion protection than most oils in the Cat
line-up.
• Wide temperature range protection – maintains consistent wear protection at both cold and hot temperatures. Designed to
flow readily at cold temperature start up, and maintains excellent wear protection at operating temperatures.
• Improved oil stability – 250% increase in oxidation stability per ASTM D943. Improved oil stability and wear protection make
Cat HYDO Advanced last longer.
(Continued)
754
Lubricants
2313211
Cat HYDO Advanced 30 Typical Characteristics {A}
Characteristics HYDO Advanced 30 HYDO Advanced 30 Advantages
SAE Viscosity Grade 30 Better wear protection, wider operating

temperature range
Viscosity ““
cSt @ 40°C (ASTM D445) 90 ““
cSt @ 100°C (ASTM D445) 10.6 ““
Viscosity Index (ASTM D2270) 100 ““
Viscosity after Shear (cST, during use) {B} 10.6 ““
4 Ball (40kg/30min/600rpm/93°C ASTM 0.30 mm ““
D4172)
Pour Point, °C (ASTM D97) -24 ““
Brookfeld Viscosity @ -20°C (ASTM 13,600 ““
D2983) mPaS
Zinc, % wt. (ASTM D495) typical 0.090 ““
Copper Strip Corrosion (3 hr, ASTM D130) 1A @ 150°C Corrosion protection
{C}
Rust Protection (ASTM D665B) Pass ““
Oxidation stability, hours (ASTM D943) >5,000 Longer drain interval; lower owning and
operating costs
Long Drain Interval, confirmed by field Yes ““
testing
Filterability, Wet, E DIN ISO 13357-1 Pass Reduced filter plugging; improves con-
tamination control due to better filtration
Foam Test {D} Reduces foaming
Seq. 1 ml. (ASTM D892) 0/0 ““
Seq. 3 ml. (ASTM D892) 0/0 ““
Seq. 3 ml. (ASTM D892) 0/0 ““
Cleanliness No interference with optical particle Accurate contamination control
counters
Ability to keep water in emulsion Yes Sludge control and water damage pre-
vention
{B} Oils that contain viscosity modifier additives will become thinner during use in this machine. This will reduce protection
level.
{C} 1A is better than 1B, 1A at 150º C is better than 1A at 100º C.
{D} New oil, as received, with 0.1% water by volume added.
Metric Volume (L) Part Number Metric Volume (L) Part Number
18 319-5920 208 319-5923
20 319-5921 Bulk 319-5919
200 319-5922
755
Lubricants
2313233
Cat® GO
Recommended Use
• Cat GO does not meet Cat TO-4 specifications and should not be used when TO-4 is recom-
mended
• Cat GO is a multi-viscosity API GL-5 classification gear oil intended for extreme-pressure
applications, such as the following:
• Differentials and final drives on Cat Wheel Tractor-Scrapers, specific Articulated Trucks,
Wheel Excavators, and Backhoe Loaders.
• Cold Planer direct drive transmissions, differentials and final drives.
• Drum bearings on Vibratory Soil Compactors.
• Cat GO is tested and approved by Caterpillar to meet the same high standards as all genu-
ine Cat parts.
• Longer Gear and Bearing Life - Superior thermal stability and oxidation resistance reduce
deposits and wear.
• Extreme-Pressure Performance - Provides extra protection for improved performance and
life in extreme-load conditions.
• Simplified Maintenance - Multi-purpose capability reduces number of gear lubricants
needed for maintenance.
• Wide Temperature Range - Provides excellent stability at high temperatures and superior
performance at low temperatures for easier start-ups.
SAE Viscosity Grade SAE 80W-90 SAE 85W-140
Gravity @ 16°C API (ASTM 26.6 25.1
D287)
Flash Point, °C (°F) (ASTM 210 (410) 230 (446)
D92)
Pour Point, °C (°F) (ASTM D97) -27 (-17) -18 (0)
Viscosity cSt @ 40°C (ASTM 139 333
D445)
Viscosity cSt @ 100°C (ASTM 14.5 25.4
D445)
Viscosity cP @ -26°C (ASTM 110,000 N/A
D2983)
Viscosity Index (ASTM D2270) 104 99
Phosphorus, % wt. (ASTM 0.087 0.087
D1091)
5 -- 8T-9582 -- Bulk 2P-9863
15 -- 8C-7398 SAE 85W-140
30 -- 8T-9583 5 -- 9X-6185
55 -- 8T-9584 -- 4 7X-7618
Bulk -- 155-6220 -- 18 133-9643
-- 5 9X-6470 -- 19 9X-8535
-- 20 7X-7867 -- 20 7X-7617
-- 60 7X-7887 -- 200 205-4312
-- 208 9X-6469 -- 205 7X-7616
-- 1000 119-5129 -- 209 133-9644
-- 1200 8C-9927 -- 1000 7X-7615
(Continued)
756
Lubricants
2313233
Cat® GO (Continued)
SAE 85W-140 (Continued)
-- Bulk 7X-7614

2313282
Cat® Synthetic GO
Recommended Use
• Cat GO does not meet Cat TO-4 specifications and should not be used when
TO-4 is recommended.
• Cat Synthetic GO is a full synthetic multi-viscosity API GL-5 classification multi-
purpose gear oil for the following applications:
• Sealed-and-lubricated track pins on Cat Track-Type Tractors and Track-Type
Loaders.
• Track-Type Tractor equalizer bar ends.
• Differentials and final drives on Cat Wheel Tractor-Scrapers, specific Articu-
lated Trucks, Wheel and Mini Excavators, and Backhoe Loaders.
• Specific Articulated Trucks as recommended in your Operation and Mainte-
nance Manual.
• Motor Grader circle drives.
• Cold Planer direct drive transmissions, differentials and final drives.
• Drum bearings on Vibratory Soil Compactors.
• Speed reducers on augers and elevators.
• Cat Synthetic GO is tested and approved by Caterpillar to meet the same high
• Maximum Gear and Bearing Life - Provides ultimate protection against scoring
of gear teeth, as well as pitting in gear teeth and rolling-element bearings.
• Extended Track Life - Improves galling resistance, reduces seal wear and mini-
mizes bushing end grooving in sealed-and-lubricated track joints.
• Wide Temperature Range - Offers superior stability at high temperatures and
superior performance at low, even arctic, temperatures.
• Reduced Wear - Provides excellent oxidation resistance which reduces buildup
of harmful deposits.
• Extreme-Pressure Performance - Offers powerful protection under extreme duty
conditions.
• Factory-Fill - Used as standard factory-fill for Cat machines.
SAE Viscosity Grade SAE 75W-140
API Service Classification GL-5, MT-1
Gravity API (ASTM D287) 31.7
Gravity, Specific .867
Channel Point, °C (°F, max (FTMS 791A- -45 (-49)
3456))
{A} The values shown are typical values and should not be used as quality control
parameters to either accept or reject product.Specifications are subject to change
without notice.
(Continued)
757
Lubricants
2313282
Cat® Synthetic GO (Continued)
SAE 75W-140
1 -- 350-9509
5 -- 242-3466
55 -- 242-3467
-- Bulk 8C-3400
2313317
Compactor Oil
• Special synthetic oil used in vibrator drum of Compactors
• Packaged in 20 L (5 gal) pails
• Large machines take 20 L (5 gal) per drum
• Small machines take 10 L (2 1/2 gal) per drum
Part Number EAME Part Number Qty. Size
353-4980 -- 1 3.8 L (1 gal)
4C-6767 185-4759 1 20 L (5.28 gal)
2313335
Cat® MTO
Recommended Use
• Recommended for older Cat Backhoe Loader rear axles and Cat Challenger Tractors.
• Cat components and systems recommending multipurpose tractor fluid that meet Ford/
New Holland M2C134D specification.
• Most Cat Hydraulic Systems.
• Cat MTO is developed, tested and approved by Caterpillar to meet the same high standards
• Improved Braking and Clutching - Where approved for use, enhances control and extends
life in clutches and wet brakes.
• Lower Maintenance Costs - Exceptional anti-wear properties extend equipment and com-
ponent lives.
• Cold-Weather Operation - Can be used in temperatures as low as -13°F (-25°C).
• Simplified Maintenance - Can be used in multiple compartments, reducing inventory and
the chance of using the wrong oil.
• Long-Lasting Performance - Offers high thermal stability and oxidation resistance for long
service life in severe applications.
(Continued)
758
Lubricants
2313335
Cat® MTO (Continued)
OEM Compatibility
Cat MTO meets the following OEM specifications {A}:
API GL-4

CNH MAT3525
Ford New Holland FNHA-2-C-201
Kubota UDT
Volvo WB 101/BM
Cat MTO can be substituted in applications that require the following:
AGCO Powerfluid 821 XL
Allison C4 (Agriculture Applications Only)
Denison HF-0/HF-1/HF-2 (T5D & P46)
Ford ESN-M2C 134 D
JI Case MS 1204-07/09
John Deere JMD J20C
Massey Ferguson MF 1135/1141
Vickers 35VQ25
Typical Characteristics {B}
Gravity API (ASTM D287) 28.6
Viscosity Brookfield, cP at -20°C 4300
Zinc, % wt. 0.15 min.
{A} Cat MTO does not meet Cat TO-4 or FD-1 and should not be used in compartments that
specify TO-4 or FD-1 oil.
{B} The values shown are typical values and should not be used as quality control parameters
5 -- 105-3335 -- 19 112-9183
55 -- 105-3334 -- 20 109-4395
Bulk -- 155-6218 -- 200 126-2700
-- 5 172-6894 -- 205 138-4271
-- 18 135-3189 -- 208 120-5286
-- Bulk 105-3333
759
Lubricants
2313370
Cat® Axle and Brake Oil Additive
English Volume (qt) Metric Volume (L) Part Number
1 qt -- 197-0017
2313382
Brake Fluid
• Meets DOT and SAE requirements
DOT 3
• Use where DOT 3 brake fluid is specified by service manual or operators guide
• Loaders, lift trucks, and service trucks
DOT 5
• DOT 5 is for extreme service conditions where higher than normal temperatures
will be encountered or where moisture absorption is a problem
• High performance cars and off-road vehicles
Part Number Qty. Size
DOT 3
4C-5585 12 0.94 L (1 qt)
4C-5586 4 3.79 L (1 gal)
DOT 5
4C-5588 12 0.94 L (1 qt)
760
Lubricants
2313409
Governor Oil
Model: 3600 Engine
• For 3600 Engine Woodward Governor

136-9642 1 0.95 L
2313424
Hydraulic Oil Additive
• Low friction additive for some hydraulic systems
• Relieves “stick-slip” on noisy hydraulic cylinders
• Not for use on machines which have a common sump for hydraulics, brake, and transmissions
Part Number Size Qty.
1U-9891 0.95 L (1 qt) bottle 12
2313441
Oil Stabilizer
• Reduces oil consumption
• Reduces engine wear
• Helps keep vital engine parts clean
• Reduces thermal oil and viscosity breakdown
This product should only be used as needed in the following engines:
Engine Model Engine Serial No.
3406E 5EK1-Up, 5DS1-Up, 6TS1-Up, 1LW1-Up,
2WS1-Up, 1MM1-Up, 4AS1-Up
C-15 6NZ1-82494
C-16 7CZ1-Up

143-3655 12 0.94 L
761
Coolants
2313463
Health and Safety
Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin
or respiratory irritation. Always observe good hygiene measures. Read and understand the Material Safety Data Sheet (MSDS)
before using this product. For a copy of the MSDS, visit us on the web at www.catmsds.com.
2313470
Cat® ELC™
Recommended Use
• Cat ELC meets or exceeds the requirements of the following specifications and guidelines:
• Cat EC-1
• ASTM D-3306
• ASTM D-6210
• TMC RP-329
• TMC RP-338
• SAE J1034
• Cat ELC is developed, tested and approved by Caterpillar to meet the same high standards
• Factory-Fill - Used as standard factory-fill for all Cat machine cooling systems.
• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as
500% compared to conventional coolants. CAT ELC eliminates the need for supplemental
coolant additives, extends coolant change-out intervals and reduces disposal require-
ments.
• Advanced Metal Protection - Incorporates an advanced formula technology with organic
acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for
maximum protection of copper, solder, brass, steel, cast iron and aluminum.
Color Strawberry Red
Boiling protection with 15 psi (1 bar) radiator cap
50% Cat ELC/50% water 129°C (265°F)
60% Cat ELC/40% water (ELC concentrate 132°C (270°F)
added)
Freezing protection
50% Cat ELC/50% water -37°C (-34°F)
60% Cat ELC/40% water (ELC concentrate -52°C (-62°F)
added)
Nitrite (50% solution) 500 ppm
Molybdate (50% solution) 530 ppm

(gal) (L) Part Number (gal) (L) Part Number
Cat ELC Concentrate (with embitterment) Cat ELC Premix 50/50 (with embitterment) (Continued)
-- 5 205-6615 1 -- 5 215-4245 4
-- 5 215-4244 2 -- 20 215-4246 4
1 -- 238-8647 -- 1000 237-4953 5
-- 4 348-8223 3 1 -- 238-8648
Cat ELC Premix 50/50 (with embitterment) 5 -- 238-8649
-- 5 205-6611 1 55 -- 238-8650 6
-- 20 205-6612 1 -- 4 348-8220 3
-- 210 205-6613 1 -- 18 348-8221 3
-- 1000 205-6614 1 -- 200 348-8222 3
-- 200 215-4242 2 275 -- 361-1024
1 3 5
EAME - Europe, Africa, Middle East APD - China APD - Australia
2 4 6
Brazil LACD - Brazil NACD - North America
762
Coolants
2313470
Cat® ELC Extender
Recommended Use
• Protects against cylinder liner/block pitting and cavitation erosion
• Should be added to Cat ELC at 500,000 km (300,000 miles) for Cat powered on-

highway trucks and 6,000 hours for commercial engines
• Extender is typically necessary only once during the life of the coolant 2313517
• Ensures Cat ELC performance to 1,000,000 km (600,000 miles) or 12,000 hours
ELC Extender and Flush Intervals
Cat ELC Extender should be added after 6,000 hours or 300,000 miles (500,000 km)
of operation, and the system should be drained and flushed with clean water after
12,000 hours or 600,000 miles (1,000,000 km). No cleaning agents are needed.

Cat ELC Extender
>0.250 (1 Qt.) -- 119-5152
1 -- 210-0786
-- 1 215-4241 1
-- 5 219-3039 1
1
LACD - Brazil
Cat® ELI
Recommended Use
• Inhibitor concentrate based on Cat® ELC technology
• For use in generator sets, industrial engines and marine engines that do not require freeze protection
• Corrosion protection, like Cat ELC, only without glycol 2313541
• Extended drain interval and little maintenance makes an excellent alternative to conventional supplement coolant additives
with water
• Lower total owning and operating costs compared to water and SCA because of the extended drain interval and limited
maintenance of Cat ELC
Cat ELI Concentrate
1 -- 351-9431
-- 1000 366-2753 1
-- 20 351-9432
-- 208 351-9433
1
NACD and LACD only
763
Coolants
2313560
Cat® DEAC™
Recommended Use
• Cat DEAC is approved for use in all Cat machines, commercial engine and truck
engine applications and most diesel, gas or natural gas engines made by other
manufacturers.
• Cat DEAC meets the following ASTM standards:
• ASTM D6210 (Heavy-duty antifreeze/coolants)
• ASTM D3306 (Automotive applications)
• ASTM D1384 (Glassware corrosion test)
• Cat DEAC is developed, tested and approved by Caterpillar to meet the same
high standards as all genuine Cat parts.
• Excellent Performance - Contains organic and inorganic corrosion inhibiting and
antifoam additives, and provides superior protection against pitting, corrosion
and freezing down to -37°C (-34°F).
• Convenience - Fully formulated, no pre-mixing with supplemental coolant addi-
tive required at initial fill. Concentrate available in 1 gallon, 20 liter, and 55 gallon
containers for top off.
Color Magenta
Boiling protection °C (°F) 15 psi pressure cap (ASTM D1177)
50% Cat DEAC/50% water 129 (265)
60% Cat DEAC/40% water (maximum) 132 (270)
Freezing protection °C (°F)
50% Cat DEAC/50% water -37 (-34)
60% Cat DEAC/40% water (maximum) -52 (-62)
Silicon concentrate (in the form of 240 ppm
Silicates)
Ethylene Glycol (% volume) 95.2% min.
parameters to either accept or reject product. Specifications are subject to change
without notice.

Cat DEAC - Concentrate with Embitterment
1 -- 339-3768
55 -- 339-3769
-- Bulk 339-3771
-- 5 362-2180 1
-- 4 339-3765 2
-- 210 362-2181 1
1
EAME Only
2
Brazil Only
764
Coolants
2313594
275 Gallon Tote Ball Valve Dispensing Tool
To dispense coolant from 275-gallon totes, a new ball valve dispensing tool has been
added to the Cat product line-up. It was designed specifically to dispense coolant
from disposable totes.

The tote dispensing tool is easy to use, and instructions are included with each tool
group. Also included are toll-free 800 numbers to receive assistance from an experi-
enced professional on the ball valve tool, plus other accessories that may be useful
per your specific installation.
The valve group should last for several years, but the cutting tool may dull, necessi-
tating the replacement of the cutting tool only.
Part Number Description

232-4452 Ball Valve Group
Group Consists of:
232-4451 Ball Valve Assembly
232-4450 Cutting Tool
239-5289 Buttress Nipple
2313606
Cat® SCA
Application
• For regular maintenance use with Cat DEAC and other heavy duty diesel engine coolants
requiring maintenence with SCA.
• For use in water-based cooling systems, such as marine appilcations that do not require
glycol for antifreeze protection.
• Use for initial does in non-fully formulated (ASTM D4985) engine coolants.
Features
• Helps stop rust and mineral deposits from forming in the cooling system.
Benefits
• Protects all metals.
• Protects against cylinder liner cavitation and corrosion.
• Will not affect gaskets or hoses.
Cat SCA Cat SCA (Continued)
.063 (1/2 pint) -- 6V-3542 55 -- 5P-2907
.125 (1 pint) -- 8T-1589 -- 1 217-0616
.250 (1 qt.) -- 3P-2044 -- 20 217-0617
5 -- 8C-3680 -- 208 217-0618
2313637
Cat® NGEC™
Recommended Use
• Cat NGEC Premix 50/50 is a heavy-duty cooling system fluid especially designed to provide superior protection against pit-
ting, freezing, and corrosion in Cat natural gas engines or natural gas engines made by other manufacturers.
• Cat NGEC meets the following ASTM standards:
• ASTM D6210 (Heavy-duty antifreeze/coolants)
• ASTM D3306 (Automotive applications)
• ASTM D1384 (Glassware corrosion test)
• Cat NGEC is developed, tested and approved by Caterpillar to meet the same high standards as all genuine Cat parts.
• Fully Formulated - Does not require an initial supplemental cooling additive.
• Quick, easy servicing.
(Continued)
765
Coolants
2313637
Cat® NGEC™ (Continued)
• Superior Protection - Contains both organic and inorganic corrosion inhibitors as well as antifoam additives. It provides
superior protection against pitting, corrosion and freezing down to -37°C (-34°F).
Color Purple
Boiling protection with 15 psi pressure cap °C (°F) (ASTM D1177)
50% Cat NGE/50% water 265 (129)
60% Cat NGEC/40% water (concentrate added) 270 (132)
Freezing protection °C (°F)
50% Cat NGEC/50% water -34 (-37)
60% Cat NGEC/40% water (maximum) -62 (-52)
Ash content, % wt. (ASTM D1119) 0.60
Silicon concentrate (in the form of Silicates) 120 ppm
Ethylene Glycol (% volume) 45.3
-- 210 362-2182 1 Cat NGEC Premix 50/50 with Embitterment (Continued)
Cat NGEC Premix 50/50 with Embitterment 55 -- 339-3778
-- 1000 339-3766 2 275 -- 339-3779
1 -- 339-3776
5 -- 339-3777
1
EAME Only
2
Australia only
2313667
Cooling System Cleaner - Standard
Applications
• Cooling system cleaner; full effect after several weeks in the cooling system.
• Not for use in removing large amounts of oil from cooling systems.
Features
• Removes scale or lime deposits.
Benefits
• Cleans cooling system while the machine works.
1
0.500 (2 qt.) -- 6V-4511
-- 1.89 185-5121 2
1
NACD - North America
2
EAME - Europe, Africa, Middle East
766
Coolants
2313687
Cooling System Cleaner - Quick Flush
Applications
• For use as preventative maintenance or as a short-time flush at the time of cool-
ant change.

• Not for use in removing large amounts of oil from cooling systems.
Features
• Removes lime deposits, scale and solder bloom.
Benefits
• Allows for one-step cleaning in just 90 minutes.

0.125 (1 pt) -- 4C-4609
0.250 (1 qt.) -- 4C-4610
1 -- 4C-4611
5 -- 4C-4612
55 -- 4C-4613
2313710
Cooling Conditioner Test Kit
Applications
• Simple dip test takes just minutes to perform. Measures coolant nitrite levels.
• Use on coolants containing nitrites (for measuring nitrite levels)
Features
• Does not require dilution, titration or drops to count.
Benefits
• Includes a color density change for people with color blindness.
Product Part Number

Coolant Conditioner Test Kit (100 test strips, sample, bottle, pipette) 4C-9301
Refill test strips 4C-9297
2313729
Battery and Coolant Refractometer
• Used to measure freezing point of coolants plus battery charge condition.
• Refractometer uses a prism and lens with simple focus adjustment to provide
accurate and repeatable measurements on easy to read scales.
• Easy to operate.
• Automatic temperature compensation (ATC).
• Requires only 2 to 3 drops of solution.
• Carrying case and calibration screwdriver included.
• Reads degrees Centigrade and Fahrenheit.
Range Resolution
-60 to 32°F propylene glycol freeze point 10°F
-50 to 0°C ethylene glycol freeze point 5°C
1.15 to 1.30 specific gravity of battery 0.01
acid
Product Part Number

Battery and Coolant Refractometer 245-5829
767
Coolants
2313748
Battery, Coolant and Diesel Exhaust Fluid Refractometer
• Digital refractometer is simple to use and to read
• Used for measuring concentration levels for multiple fluids including ethylene glycol-based coolants such as Cat ELC and
Cat DEAC, propylene glycol-based coolants, Cat ELI and battery charge condition
• Tool operating manual provides conversion for concentration of coolant glycol level to corresponding freeze protection level
• Automatic temperature compensation
• Requires only a few drops of fluid
• Case and cleaning cloth included
Product Part Number
Brix Digital Refractometer 360-0774
768
Greases
2313767
Health and Safety
Cat Grease is developed, tested and approved by Caterpillar to meet the same high standards as all genuine Cat parts. Under
normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin or re-
spiratory irritation. Always observe good hygiene measures. Read and understand the Material Safety Data Sheet (MSDS) before
using this product. For a copy of the MSDS, visit us on the web at www.catmsds.com.

2313774
Cat® Multipurpose Grease
Recommended Use
• Cat Multipurpose Grease is recommended for use in low-load, low-speed applications and
ambient temperatures ranging from -30° to 40°C (-22° to 104°F).
• Reduced Component Wear - Resists softening and protects parts from wear.
• Corrosion Protection - Resists oxidation and protects metal against rust. Will not corrode
or damage steel, copper bearing alloys or conventional seal materials.
• Excellent General Purpose - Lithium complex grease for applications where load, speed,
temperature and moisture conditions are low.
NGLI # 2
Ambient Range -30° to +40°C (-22° to +104°F)
Operating Range -32° to +149°C (-25° to +300°F)
Base Fluid Type Petroleum
Thickener Type Lithium Complex
Color Blue
% Molybdenum disulfide 0
Worked Penetration (mm) 265-295
% Change/100,000 stroke -5 to +15
Roll Stability w/H2O, % change N/A
Viscosity Index, Min N/A
Viscosity @ 100°C, cSt 19.5-22.5
Viscosity @ 40°C, cSt 230-245
4 Ball Wear (mm) Max, Typ. 0.75
4 Ball E.P. Weld Point (kg) Min. 315
Timken E.P. Test OK load (lb) Typ. 55 Min
Oxidation-psi drop/500 hr Max N/A
Rust Test Pass
Copper Corrosion 1b
Dropping Point +260°C (+500°F)
{A} The values shown below are typical values and should not be used as quality control
parameters to either accept or reject product. Specifications are subject to change without
notice.
English Volume (lb) Metric Volume (kg) Part Number English Volume (lb) Metric Volume (kg) Part Number
NLGI Grade #2 NLGI Grade #2 (Continued)
14 oz (cartridge) 397 g (cartridge) 1P-0808 35 (plastic pail) 16 (plastic pail) 7X-7664
14 oz (cartridge) -- 324-8141 2 120 (keg) 54 (keg) 9X-6488
15.9 oz (cartridge) 450 g (cartridge) 129-1950 1 400 (drum) 181 (drum) 7X-7665
35 (metal pail) 16 (metal pail) 129-1919 400 lb (drum) -- 324-8143 2
35 lb (plastic pail) -- 324-8142 2 3500 (tote) 1588 (tote) 129-1921
1
Australia use
2
China Only
769
Greases
2313800
Cat® Advanced 3Moly Grease
Recommended Use
• Cat Advanced 3Moly Grease is recommended for use in medium-load and medium-speed
applications with ambient temperatures ranging from -20° to 40°C (-4° to 104°F).

• Long Life - Lithium Complex formula enhanced with 3% molybdenum disulfide (moly), Cat
Advanced 3Moly Grease is an excellent grease for applications where speed, load and
temperature are moderate and moisture is low.
• Reduced Component Wear - Resists softening and protects parts from wear.
NGLI # 2
Thickener Type Lithium Complex
Color Gray
% Change/100,000 stroke 10 Max
Viscosity @ 100°C, cSt 22
Timken E.P. Test OK load (lb) Typ. 55 Min
Oxidation-psi drop/500 hr Max N/A
Rust Test Pass
Salt Fog Test, hours N/A
Copper Corrosion 1b
NLGI Grade #2 (3% Moly) NLGI Grade #2 (3% Moly) (Continued)
14 oz (cartridge) 397 g (cartridge) 5P-0960 35 (metal pail) 16 (metal pail) 129-1924
14 oz (cartridge) -- 324-8140 1 120 (keg) 54 (keg) 9X-6489
15.9 oz (cartridge) 450 g (cartridge) 129-1952 2 400 (drum) 181 (drum) 7X-7701
35 (plastic pail) 16 (plastic pail) 7X-7699 400 lb (drum) -- 324-8138 1
35 lb (plastic pail) -- 324-8139 1 3500 (tote) 1588 (tote) 129-1926
1
China Only
2
Australia use
770
Greases
2313826
Cat® Ultra 5Moly Grease
Recommended Use
• Cat Ultra 5Moly Grease is formulated for use in high-load and high-speed applications with
ambient temperatures ranging from -35° to 40°C (-31° to 104°F) for NLGI #1, -30° to 50°C

(-22° to 122°F) for NLGI #2, and -40°C to 36°C (40°F to 95°F) for NLGI #0.
• Moisture Resistance - Resists washout from fresh and salt water.
• Long Life - High-quality Calcium Sulfonate Complex formula with 5% molybdenum disulfide
(moly) provides long service life in Cat applications.
• Reduced Component Wear - Resists softening and continues to protect parts under ex-
treme loads and high speeds.
• Low Environmental Risk - Formulated to use no lead, antimony, zinc, barium, chlorine,
phosphorus or free sulfur.
NGLI # 0 1 2
Ambient Range -40° to +35°C (-40° to -35° to +40°C (-31° to -30° to +50°C (-22° to
+95°F) +104°F) +122°F)
Operating Range -45° to +149°C (-49° to -40° to +149°C (-40° to -32° to +149°C (-25° to
+300°F) +300°F) +300°F)
Base Fluid Type Petroleum Petroleum Petroleum
Thickener Type Calcium Sulfonate Calcium Sulfonate Calcium Sulfonate
Complex Complex Complex
Color Gray Gray Gray
% Molybdenum 5 5 5
disulfide
Worked Penetration 355-385 310-340 265-295
(mm)
% Change/100,000 +/-5 +/-5 +/-5
stroke
Roll Stability w/H2O, % +/-5 +/-5 +/-5
change
Viscosity Index, Min N/A N/A N/A
Viscosity @ 100°C, cSt 7 11.5 11.5
Viscosity @ 40°C, cSt 64 150 150
4 Ball Wear (mm) Max, 0.5 0.5 0.5
Typ.
4 Ball E.P. Weld Point 620 620 620
(kg) Min.
Timken E.P. Test OK 60 60 60
load (lb) Typ.
Oxidation-psi drop/500 N/A N/A N/A
hr Max
Rust Test Pass Pass Pass
Salt Fog Test, hours +4,000 +4,000 +4,000
Copper Corrosion 1a 1a 1a
Dropping Point +288°C (+550°F) +288°C (+550°F) +288°C (+550°F)
(Continued)
771
Greases
2313826
Cat® Ultra 5Moly Grease (Continued)
NLGI Grade #0 NLGI Grade #2
400 (drum) 181 (drum) 206-7406 14 oz (cartridge) 397 g (cartridge) 183-3424
2000 lb (disposable 907 kg 344-4001 15.9 oz (cartridge) 450 g (cartridge) 183-3425 1

tote) 35 (plastic pail) 16 (plastic pail) 183-3426
3500 (tote) 1588 (tote) 206-7411 35 (metal pail) 16 (metal pail) 266-8563 1
NLGI Grade #1 120 (keg) 54 (keg) 183-3427
14 oz (cartridge) 397 g (cartridge) 161-9203 400 (drum) 181 (drum) 183-3428
15.9 oz (cartridge) 450 g (cartridge) 197-9227 1 2000 lb (disposable 907 kg 344-3999
35 (plastic pail) 16 (plastic pail) 183-3432 tote)
35 (metal pail) 16 (metal pail) 266-8562 1 3500 (tote) 1588 (tote) 183-3429
120 (keg) 54 (keg) 161-0970
400 (drum) 181 (drum) 161-0971
2000 lb (disposable 907 kg 344-4000
tote)
3500 (tote) 1588 (tote) 266-8564
1
2313865
Australia use
Cat® Desert Gold Grease

Recommended Use
• Cat Desert Gold Grease is recommended for use in all load and speed applications and
ambient temperature ranges of -20° to 60°C (-4° to 140°F).
• Extreme Heat Operation - Performs and protects where ambient temperatures are regu-
larly above 32° C (90°F).
• Extreme Life - High-quality Calcium Sulfonate Complex synthetic base with 5% molybde-
num disulfide (moly) delivers unmatched performance in Cat applications.
• Reduced Component Wear - Resists softening and continues to protect parts under ex-
treme loads and high speeds.
• Low Environmental Risk - Is formulated not to contain lead, antimony, zinc, barium, chlo-
rine, phosphorus or free sulfur.
(Continued)
772
Greases
2313865
Cat® Desert Gold Grease (Continued)
NGLI # 2

Base Fluid Type Synthetic
Thickener Type Calcium Sulfonate Complex
Color Gold
% Change/100,000 stroke +/-1
Roll Stability w/H2O, % change +/-1
Viscosity Index, Min 125
Timken E.P. Test OK load (lb) Typ. 65
Oxidation-psi drop/500 hr Max 5
Rust Test Pass
Salt Fog Test, hours +1,100
Copper Corrosion 1a
NLGI Grade #2 NLGI Grade #2 (Continued)
14 oz (cartridge) 397 g (cartridge) 129-1938 120 (keg) 54 (keg) 129-1943
15.9 oz (cartridge) 450 g (cartridge) 129-1937 1 400 (drum) 181 (drum) 129-1944
35 (plastic pail) 16 (plastic pail) 129-1941 3500 (tote) 1588 (tote) 129-1946
35 (metal pail) 16 (metal pail) 129-1942
1
Australia use
773
Greases
2313894
Cat® Arctic Platinum Grease
Recommended Use
• Cat Arctic Platinum Grease is recommended for use in all load and speed ap-
plications and ambient temperature ranges of -50° to 20°C (-58° to 68°F).

• Extreme-Cold Operation - Performs and protects where ambient temperatures
are regularly below 0°F.
• Extreme Life - High-quality Calcium Sulfonate Complex synthetic base with 5%
molybdenum disulfide (moly) delivers unmatched performance in Cat applica-
tions.
• Reduced Component Wear - Resists softening and continues to protect parts
under extreme loads and high speeds.
• Corrosion Protection - Resists oxidation and protects metal against rust. Will not
corrode or damage steel, copper bearing alloys or conventional seal materials.
• Low Environmental Risk - Is formulated not to contain lead, antimony, zinc,
barium, chlorine, phosphorus or free sulfur.
NGLI # 0
Base Fluid Type Synthetic
Thickener Type Calcium Sulfonate Complex
Color Platinum
Roll Stability w/H2O, % change +/-5
Timken E.P. Test OK load (lb) Typ. 65
Rust Test Pass
Salt Fog Test, hours N/A
Copper Corrosion 1a
parameters to either accept or reject product. Specifications are subject to change
without notice.
English Volume (lb) Metric Volume (kg) Part Number

NLGI Grade #0
14 oz (cartridge) 64 (cartridge) 341-0726
35 (plastic pail) 16 (plastic pail) 129-8708
120 (keg) 54 (keg) 129-8709
400 (drum) 181 g (drum) 129-8710
2000 (disposable tote) 907 (tote) 344-4002
774
Greases
2313919
Cat® High Speed Ball Bearing Grease
Recommended Use
• Electric motors, fan drives, starters, alternators, generators
• It can also be used in automotive and industrial applications, especially where equipment is operated intermittently in

severe conditions.
• Formulated with synthetic thickener and corrosion inhibitors, High Speed Ball Bearing Grease provides excellent lubrication
in ball and roller bearings operating over a broad temperature range.
• High-Stress Performance - Provides outstanding protection at high speeds (10,000 rpm and greater) and the high tempera-
tures (163°C/325°F) associated with high speeds.
• Moisture Resistance - Resists wash out from fresh and salt water.
• Increased Component Life - Heat resistance provides improved protection, reducing component wear rates.
• Low-Temperature Operation - Remains mobile in temperatures as low as -30°C (-22°F).
NGLI # 2
Thickener Type Polyurea
Color Blue-Green
4 Ball Wear (mm) Max, Typ. N/A
4 Ball E.P. Weld Point (kg) Min. N/A
Timken E.P. Test OK load (lb) Typ. N/A
Rust Test Pass
Copper Corrosion 1a

NLGI #2
14 oz (cartridge) 397 g (cartridge) 2S-3230
2313941
White Assembly Grease
Applications
• For use in general assembly and other light-duty applications.
Features
• Added tackifiers, making it ideal for holding gears, bearings, gaskets and other parts during assembly.
• Contains no molybdenum disulfide.
Benefits
• Exceptional general purpose Lithium Complex grease.
(Continued)
775
Greases
2313941
White Assembly Grease (Continued)
NLGI #0
10 oz (tube) 254 g (tube) 266-9682
NLGI #2
14 oz (cartridge) 397 g (cartridge) 129-1966
2313965
Cat® Hammer Paste
Cat® Hydraulic Hammer Paste (Grease) is formulated to lower friction and improve
tool and bushing life in the harsh environments encountered with hydraulic impact
hammer applications. These work tools generate high heat, severe shock, and heavy
friction loads, which can fuse parts together. Cat Hydraulic Hammer Paste is made
from copper and graphite to provide excellent wear protection even at temperatures
higher than 2,000°F (1,093°C).
Performance
• Formulated for extreme temperatures and applications
• Strong adhesion, even in the presence of water
Protection
• Significantly slows wear
• Prevents seizing
• Extremely stable and corrosion resistant
Typical Characteristics *
Color Copper
NLGI Class 2
Thicker Type Aluminum Complex
Base Oil Type Mineral
Operating Range -20 to 1,100°C (-4 to 2,012°F)
4 Ball E.P. Weld Point (kg) 400
Dropping Point 260°C (500°F)
* The values shown are typical values and should not be used as quality control
parameters

NLGI #2
11 lbs (tub) 5 kg (tub) 133-8807
-- 400 g (auto lube cartridge) 317-8491
-- 12 pack (auto lube cartridge) 317-8492
2313987
High Vacuum Grease
• Applications where maintaining a seal under vacuum or pressure is required.
776
Greases
2314000
Ultra Synthetic Generator Grease
• Clay-thickened, synthetic based oil, multi-service grease.
• Provides low temperature breakaway performance.

NLGI #1.5
2314016
Cat Multipurpose Marine Grease
Recommended Use
• Cat Multipurpose Marine Grease is recommended for use in medium load and
high speed applications and ambient temperature ranges of -30° to 175°C (-22°
to 347°F).
• Long Life - High quality Calcium Sulfonate Complex base delivers unmatched
performance in marine applications.
• Reduced Component Wear - Resists softening and continues to protect parts
under medium loads and high speeds.
• Corrosion Protection - Resists oxidation and protects metal against rust. Will not
corrode or damage steel, copper bearing alloys or conventional seal materials.
• Low Environmental Risk - Is formulated not to contain lead, antimony, zinc,
barium, chlorine, phosphorus or free sulfur.
(Continued)
777
Greases
2314016
Cat Multipurpose Marine Grease (Continued)
Typical Characteristics*
Color Blue Green
NLGI Grade 2
Thickener Overbased Calcium Sulfonate

Base Oil Petroleum
Operating Range -30° to -175°C (-22° to 347°F)
Viscosity CST @ 40°C 110
Viscosity CST @ 100°C 12
Penetrsation Worked 60 Strokes 265-295
% Change/10,000 Stroke +/-2
% Change/100,000 Stroke +/-5
Oil Separation 24 Hrs @ (77°F) 0.25
Roll Stability Penetration w/H2O, % +/-1
change
4 Ball Wear Test (mm) Scar (kg) 40
4 Ball E.P. Test Weld Point (kg) 500
Load Wear Index (kg) 65
Timken E.P. Test OK Load (lb) Typ. 65
Rust Test Pass
Water Washout @ 79°C (175°F), % loss 275
Wheel Bearing Leakage Grams Modified 0.4
@ 163°C (325°F)
Dropping Point 298°C (570°F)
*Values shown are typical values and should not be used as quality control pa-
rameters to either accept or reject product. Specifications are subject to change
without notice.
English Volume (lb) Metric Volume (kg) Part Number

778

1、Cat Fluid Info Part Number

Uploaded by

Copyright:

Available Formats

1、Cat Fluid Info Part Number

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1、Cat Fluid Info Part Number

Uploaded by

Copyright:

Available Formats

What are the recommended uses of Cat DEO?

What are the recommended uses of Cat DEO?

What are some of the typical characteristics of Cat DEO?

What are some of the typical characteristics of Cat DEO?

Lubricants

Fluid Information and Part Numbers

Fluid Information and Part Numbers

English Volume Metric Volume English Volume Metric Volume

Fluid Information and Part Numbers

Fluid Information and Part Numbers

English Volume Metric Volume English Volume Metric Volume

Fluid Information and Part Numbers

Fluid Information and Part Numbers

Allison Test C-4

Fluid Information and Part Numbers

English Volume Metric Volume English Volume Metric Volume

Fluid Information and Part Numbers

Caterpillar Test FD-1

Fluid Information and Part Numbers

HEES Hydraulic Oil {B} HVLP {B}, HV {B}

Fluid Information and Part Numbers

SAE 10W lic Oil, HVLP or HV

Fluid Information and Part Numbers

Fluid Information and Part Numbers

Fluid Information and Part Numbers

Fluid Information and Part Numbers

Fluid Information and Part Numbers

Part Number Qty. Size

English Volume Metric Volume English Volume Metric Volume

Fluid Information and Part Numbers

English Volume (gal) Metric Volume (L) Part Number

English Volume (gal) Metric Volume (L) Part Number

Fluid Information and Part Numbers

Part Number Description

Fluid Information and Part Numbers

English Volume (gal) Metric Volume (L) Part Number

Product Part Number

Product Part Number

Fluid Information and Part Numbers

Discover the Difference

Fluid Information and Part Numbers

2000 lb (disposable 907 kg 344-4001 15.9 oz (cartridge) 450 g (cartridge) 183-3425 1

Cat® Desert Gold Grease

Fluid Information and Part Numbers

Discover the Difference

English Volume (lb) Metric Volume (kg) Part Number

Fluid Information and Part Numbers

English Volume (gal) Metric Volume (L) Part Number

English Volume (gal) Metric Volume (L) Part Number

Fluid Information and Part Numbers

Thickener Overbased Calcium Sulfonate

English Volume (lb) Metric Volume (kg) Part Number

You might also like