C ou nt um G ro up

Co u n tum Group

Metering Solutions
Metering Solutions
M

Equalis AIM

Additive Injection System

Satam additive injection and control system is composed of Equalis S controller and Flow Measuring
computers systems
one or several AIM (additive injection modules).
Equalis S controller is designed to operate as single or multi-point additive injection Flow Accessories
controller. It is capable of controlling from 1 to 12 additives injection modules (AIM) meters

operating simultaneously or individually in any combination.

Fields of application Additive controller Equalis S

• Additives injection during tank-truck loading Compatible with terminal automation systems, Equalis S can
• Additives injection during preparation of aviation fuels operate in both stand alone or online mode. Multi levels of
• Colouring and marking of heating oils and taxes security by way of user defined PIN numbers for Service
reduced fuels Personnel and Management ensure system integrity.

Equipped with a durable "antivandalism"key pad for menu driven

Key points configuration, Equalis S can also be PC configured. Its wide
graphic display provides easy to view measuring and
• Comprehensive additives injection system compatible configuration information for both users and service personnel.
with most existing meters fitted with pulses transmitter.
• Can control the injection of 1 to 12 additives per Equalis S is a multifunctional device : it an operate as a
measuring line standalone additive injection controller or as a loading batch
controller with additivation and blending functionnalities.
• Automatic calibration of the additives meters
• Display of additive(s) and main product volumes
• Display of additives concentrations (ppm) AIM module
• Direct communication with Terminal Automation System Central to the AIM block is a high precision oval gear positive
• Can operate as a stand-alone unit displacement meter with pulses output proportional to the
injected volume.

Oval gear meter The second key element of the AIM is the solenoid valve to
control the additive injection volume. A fast direct acting valve
Solenoid valve
Check valve with a ruby seat allows for high velocity flows through a small
3mm orifice providing minute proportion control even at high
injection pressures and liquid changing temperatures.
Outlet
AIM is controlled by Equalis S. It accurately injects small
amounts of additives to a base product.
Inlet
Measured additives can be lead replacements, dyes and markers,
Pulses Binary denaturants, detergents, odorizing, antifreeze, anti-corrosion,
Isolating - regulating valves output input anti-detonating, anti-static, anti-icing, anti-foaming, emulsifiers
and performance enhancing agents.
 Technical data - Additive Injection System
Model Equalis AIM
Application In-line injection of additives in petroleum products
Functions Metering of additives quantities
Control of additives injection proportionally to additives concentration setpoints
Control of additives pumps via Modbus tables
Calculation of average additives concentrations (ppm) per batch
“Clean arm” function to provide a product without additive in the loading arm at the end of the batch
Secured back-up of the batch data (products and additives quantities, concentrations , time and date…)
Additive injection modules AIM004 AIM006 AIM008
Max. flowrate (L/h – L/min) 60 - 1.0 100 - 1.66 600 – 10
Min. flowrate (L/h – L/min) 0.6 – 0.01 1.8 – 0.03 15 – 0.25
Matérials Back plate 304 stainless steel
Manifold 303 stain less steel
Enclosure UV-resistant impact modified polycarbonate
Meter, valves and strainer 316 stainless steel
Solenoid valve Ruby seat to cover all applications
Isolating, flow regulating and check valves, strainer,
Internal construction Manifold
Solenoid valve, precision oval gear flow meter, Inlet and outlet elbows, inlet and outlet port
Manifold connections 3/8” NPT
Strainer Min 75 μm (200 mesh)
Operating conditions Pressure 10 bar max with 6 - 24VDC solenoid - 20 bar max with 108 - 220VAC solenoid
Ambient temperature -25°C to + 60°C
Humidity 5 to 95% without condensation
Protection class IP66
Performances Meter accuracy +/-0.5% @ 3 mm²/s (cSt)
Meter repeatability +/-0.25%
Additive injection controller Equalis S
Equipment User Interface Display : Graphic screen, 240 x 128 pixels, backlight - Volume resolution : 999999 points
Numeric keyboard, pre-programmed pushbuttons, cycle start/stop pushbutton
Enclosure Aluminum base with epoxy coating
Inputs/Outputs Main meter inputs 1 or 2 inputs dual-pulse with flow direction - Intrinsic safety or NAMUR*
Temperature inputs 1 or 2* inputs (4-wire Pt100)
Digital inputs 15 inputs (intrinsic safety) and 2* input (NAMUR) - Up to 12 inputs dedicated to AIM additives metering
for additive volumes, grounding system, arm position, overfilling system, vapour recovery, emergency stop
Digital outputs 10 (+10*) relays (250V, 10A) - Up to 12 outputs dedicated to additives injection control
for additives injection, valves control, alarm
Databus 1 port RS485 or Ethernet TCP/IP : communication with supervisory system
1 port RS485 or RS232 : printer
Communication protocole : Modbus RTU
1 port USB : Data extraction
Operating conditions
Ambient temperature Standard : -20 °C to +55 °C - Option : -40 °C to +55 °C
Certification for potentially explosive ATEX and IEC Ex
atmospheres Zone 1 – II 2 (1) 1 G Ex d [ia Ga] ia IIB T4 Gb Ga
Protection class IP66
Power supply 100 to 240 VAC 50 à 60 Hz-
Dimensions Height x width x depth (mm) : 278 x 350 x 192 (without cable glands) - Weight : 16 kg

* : optional

Headquarters and Sales Department Manufacturing facility

PARIS NORD II Avenue de Verdun - CS 60129
Bat. le Gauguin - 47, allée des Impressionnistes 14700 Falaise FRANCE
BP 85012 Villepinte Tél. : +33 (0)2 31 41 41 41
95931 Roissy CDG Cedex FRANCE Fax : +33 (0)2 31 40 75 61
Phone : +33 (0)1 48 63 02 11
Fax : +33 (0)1 49 38 41 01
E-mail : [email protected] www.satam.eu
As Satam regularly improves its products to ever better respond to evolving market and regulatory requirements, B044-GB-REV1-01/17-Marketing Satam
it reserves the right to change any of the specifications of these products, and this without prior notice. Design & printing : TACTIC IMPRESSIONS - 01 39 86 19 08