Scribd
Upload
40 views3 pages

Data Communication QBANK

This document contains an exam for a Data Communications/Practical course, consisting of 4 questions. Question 1 asks students to define networking terms like password types, ARP protocol functions, and IPv4/IPv6 differences. Question 2 asks students to write Cisco router commands for tasks like setting passwords, saving configurations, and displaying interfaces. Question 3 provides topology diagrams and asks students to write commands to configure routing and IP addresses. Question 4 asks students to analyze IPv6 addresses and identify network and interface portions. The exam is open book and tests students' knowledge of networking concepts and ability to write Cisco configuration commands.

Uploaded by

اكاديميه فاروس العلميه
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views3 pages

Data Communication QBANK

This document contains an exam for a Data Communications/Practical course, consisting of 4 questions. Question 1 asks students to define networking terms like password types, ARP protocol functions, and IPv4/IPv6 differences. Question 2 asks students to write Cisco router commands for tasks like setting passwords, saving configurations, and displaying interfaces. Question 3 provides topology diagrams and asks students to write commands to configure routing and IP addresses. Question 4 asks students to analyze IPv6 addresses and identify network and interface portions. The exam is open book and tests students' knowledge of networking concepts and ability to write Cisco configuration commands.

Uploaded by

اكاديميه فاروس العلميه
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Mansoura University Academic Year 2019/2020 2nd Term.

Faculty of Computer and Information Course: Data Communications/Practical.


Total Grade: PASS/FAIL 2nd Year General and Programs
. Final Exam-QBANK OPEN BOOK EXAM Sept 2020

Question #1:
- List some different types of passwords can be assigned to CISCO router.
- State the main functions of ARP protocol.
- In DHCPv6, briefly explain is difference between stateful and stateless configuration?
- What is the difference between IPv4 and IPv6?
- Briefly explain the differences between the three main IPv6 address types.
- List the different modes of CISCO router configuration and give example of a command use
in each mode.
- In DHCPv6, what is difference between stateful and stateless configuration?

Question #2:
- Write command(s) that create console password on any Cisco router.
- Write command(s) that Save the router configuration to prevent it from being lost.
- Write command(s) that create TELNET password on any Cisco router.
- Write command(s) that Display the clock of CISCO router.
- Write command(s) that Display brief information about router interfaces.
- Write command(s) that Assign a TELNET password 878 to a CISCO router.
- Write command(s) that Assign secret password 678 to a CISCO router.
- Write command(s) that Assign a console password 123 to a CISCO router.
- Write command(s) that Assign VTY password 142 to a CISCO router.
Question #3:
- For the following topology, write command(s) that:

- Assign appropriate IP address to Fa4/0 in router R1 then switch on the port.


- Assign appropriate IP address to Se5/0 in router R1 then switch on the port.
- Assign appropriate IP address to Fa5/0 in router R2 then switch on the port.
- Assign clock rate of 56000 to Se5/0 in router R1.
- Using assigned IPs above, perform static routing at router R1.
- Assign appropriate IP address to Se4/0 in router R2 then switch on the port.
- Assign appropriate IP address to Fa5/0 in router R1 then switch on the port.
- Using assigned IPs above, perform static routing at router R2.
- For the following topology, write command(s) that:

a. Assign link-local IP to router Router1.


b. Assign global IPv6 to interface f0/1 in Router1.

- For the following topology, write command(s) that:

a. Assign appropriate IP address to Fa0/0 in router R then switch on the port.


b. Assign secret password to router R.
c. Change hostname router into IT_DEPT.
d. Apply DHCP configuration at router R to assign IP, DNS-server IP and gateway IP to PC.
- For the following topology, write command(s) that:

- Assign appropriate IP address to f0/0 in router R1 then switch on the port.


- Assign appropriate IP address to f0/0 in router R2 then switch on the port.
- Apply secret password at router R1.
- Apply secret password at router R2.
- Apply TELNET password at router R1.
Question #4:
- Identify number of network bits, number of interfaces bits, network portion and interfaces
portion of the following IPv6:
- 2001:DB8:CAFE:1111::1/64
- 2001::1/96
- 2001::2/96
- 2001:db8:a0b:12f0::1
- 2001:db8:a0b:12f0::1/64

-
With Our Best Wishes
Prof. Hassan Soliman, Dr. Mostafa Elgaiar

You might also like