INPUT : DC Control,

Three Phase SSR (480VAC) OUTPUT : Triac

10 ~ 40 Amps

Schematic Mechanical Drawing Derating Curve

Series : 012 J/K

C & D = 0.5°C/W
F & G = 0.14°C/W

For Heatsink details refer to

“Recommended Heatsink” chart

Salient Features
• Opto Isolation 2500 VAC • Voltage Range 50 to 480 Vac
• Load Current 3x10A/16A/25A/40A • Reverse Polarity Protection

Electrical Specification @ TA = 250C Note: For Random T - On SSR, add letter ‘K’ in place of ‘J’.

ELECTRICAL SPECIFICATIONS PRODUCT PART NUMBERS

Parameter Symbol Unit 012 JDA 481000 012 JDA 481600 012 JDA 482500 012 JDA 484000
Control Volt Range Vdc 3-32 3-32 3-32 3-32
Control Curr Range mA 80 80 80 80
Input

Pick-Up Voltage Vdc 3.0 3.0 3.0 3.0

Drop-Out Voltage Vdc 1.0 1.0 1.0 1.0
Input Resistance Current Regulator Current Regulator Current Regulator Current Regulator

Rms On State Current IT A 10 16 25 40

Mains Control Volt Vrms Vac 50-480 50-480 50-480 50-480
Peak Off
State Voltage Vdrm Vpk 800 ~ 1200 800 ~ 1200 800 ~ 1200 800 ~ 1200
Off State Lekage Curr Idrm mA 10 10 10 10
Zero T-On Voltage Vpk 20 20 20 20
On state Voltage Drop VTM Vac 1.6 1.6 1.85 1.85
Peak one Cycle
Surge Curr(Non Rep) ITSM A 100 160 250 350
Output

Holding Current IH mA 150 150 250 250

Critical Rate of Rise
of Off State Voltage dv/dt V/µs 200 200 250 250
0
Thermal Resistance RTH C/W 3.5 2.5 1.5 1.0
Frequency Range f Hz 47 ~ 63 47 ~ 63 47 ~ 63 47 ~ 63
Turn-On T-On ms 10 10 10 10
Turn-Off T-Off ms 10 10 10 10
0
Operating Temp T Oper C - 30 to + 80 - 30 to + 80 - 30 to + 80 - 30 to + 80
Fusing Current I2T A2 S 50 120 260 610
19
*Our policy is one of continuous development and specifications are subject to change without notice. Warranty is limited to a period of one
year for relay value only.
 INPUT : DC Control,
Three Phase SSR (480VAC) OUTPUT : Direct Copper Bonded Back - to - Back SCR
50 ~ 90 Amps

Schematic Mechanical Drawing Derating Curve

Series : 012 SJ/K

F = 0.14°C/W

For Heatsink details refer to

“Recommended Heatsink” chart

Salient Features
• Opto Isolation 2500 VAC • Voltage Range 50 to 480 Vac • Load Current 3x50A/75A/90A
• Reverse Polarity Protection for DC Input Control.

Electrical Specification @ TA = 250C Note: For Random T - On SSR, add letter ‘K’ in place of ‘J’.

ELECTRICAL SPECIFICATIONS PRODUCT PART NUMBERS

Parameter Symbol Unit 012 SJDA 485000 012 SJDA 487500 012 SJDA 489000
Control Volt Range Vdc 4-32 4-32 4-32
Input

Control Curr Range mA 8-80 8-80 8-80

Pick-Up Voltage Vdc 4.0 4.0 4.0
Drop-Out Voltage Vdc 1.0 1.0 1.0
Input Resistance Current Regulator Current Regulator Current Regulator

Rms On State Current IT A 50 75 90

Mains Control Volt Vrms Vac 50-480 50 -480 50-480
Peak Off
State Voltage Vdrm Vpk 800 ~ 1200 800 ~ 1200 800 ~ 1200
Off State Lekage Curr Idrm mA 10 10 10
Zero T-On Voltage Vpk 20 20 20
On state Voltage Drop VTM Vac 2 2 2
Peak one Cycle
Output

Surge Curr(Non Rep) ITSM A 500 1150 1150

Holding Current IH mA 250 300 300
Critical Rate of Rise
of Off State Voltage dv/dt V/µs 1000 1000 1000
0
Thermal Resistance RTH C/W 0.7 0.6 0.3
Frequency Range f Hz 47 ~ 63 47 ~ 63 47 ~ 63
Turn-On T-On ms 10 10 10
Turn-Off T-Off ms 10 10 10
0
Operating Temp T Oper C - 30 to + 80 - 30 to + 80 - 30 to + 80
2 2
Fusing Current IT AS 1250 5000 5000
20
*Our policy is one of continuous development and specifications are subject to change without notice. Warranty is limited to a period of one
year for relay value only.
 INPUT : DC Control,
Three Phase Motor Reversing OUTPUT : Triac
SSR (480VAC) 10 ~ 40 Amps

Schematic Mechanical Drawing Derating Curve

40
F&G
Series : 012 RJ/K

F&G

LOAD CURRENT (AMPS)

25

F&G
16
C&D
10

0 10 20 30 40 50 60 70 80
AMBIENT TEMPERATURE (oC)

C & D = 0.5°C/W
F & G = 0.14°C/W

For Heatsink details refer to

“Recommended Heatsink” chart

Salient Features
• Opto Isolation 2500 VAC • Voltage Range 50 to 480 Vac • Load Current 2x10A/16A/25A/40A
• Reverse Polarity Protection for DC Input Control• Interlocking Protection included.

Electrical Specification @ TA = 250C Note: For Random T - On SSR, add letter ‘K’ in place of ‘J’.

ELECTRICAL SPECIFICATIONS PRODUCT PART NUMBERS

Parameter Symbol Unit 012 RJDA 481000 012 RJDA 481600 012 RJDA 482500 012 RJDA 484000
Control Volt Range Vdc 4-32 4-32 4-32 4-32
Control Curr Range mA 80 80 80 80
Input

Pick-Up Voltage Vdc 4.0 4.0 4.0 4.0

Drop-Out Voltage mA 1.0 1.0 1.0 1.0
Input Resistance Current Regulator Current Regulator Current Regulator Current Regulator

Rms On State Current IT A 10 16 25 40

Mains Control Volt Vrms Vac 50-480 50-480 50-480 50-480
Peak Off
State Voltage Vdrm Vpk 800 ~ 1200 800 ~ 1200 800 ~ 1200 800 ~ 1200
Off State Lekage Curr Idrm mA 10 10 10 10
Zero T-On Voltage Vpk 20 20 20 20
On state Voltage Drop VTM Vac 1.6 1.6 1.85 1.85
Peak one Cycle
Surge Curr (Non Rep) ITSM A 100 160 250 350
Output

Holding Current IH mA 100 100 250 250

Critical Rate of Rise
of Off State Voltage dv/dt V/µs 200 200 250 250
0
Thermal Resistance RTH C/W 3.5 2.5 1.5 1.0
Frequency Range f Hz 47 ~ 63 47 ~ 63 47 ~ 63 47 ~ 63
Turn-On T-On ms 10 10 10 10
Turn-Off T-Off ms 10 10 10 10
0
Operating Temp T Oper C - 30 to + 80 - 30 to + 80 - 30 to + 80 - 30 to + 80
Fusing Current I2T A2 S 50 120 260 560
23
*Our policy is one of continuous development and specifications are subject to change without notice. Warranty is limited to a period of one
year for relay value only.