Scribd
Upload
169 views

During The Execution of A CNC Part Program Block NO20 GO2 X45

The document contains multiple choice questions about numerical control concepts. It tests knowledge of tool path commands like GO1, GO2, GO3 for linear and circular interpolation and defines rotational axes like the c-axis. It also covers computer functions in CNC, the control loop unit, factors that affect machine repeatability, and data processing terms like reading and writing.

Uploaded by

ashok pradhan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
169 views

During The Execution of A CNC Part Program Block NO20 GO2 X45

The document contains multiple choice questions about numerical control concepts. It tests knowledge of tool path commands like GO1, GO2, GO3 for linear and circular interpolation and defines rotational axes like the c-axis. It also covers computer functions in CNC, the control loop unit, factors that affect machine repeatability, and data processing terms like reading and writing.

Uploaded by

ashok pradhan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

1. During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.

0
the type of tool motion will be
A. circular Interpolation – clockwise
B. circular Interpolation – counterclockwise
C. linear Interpolation
D. rapid feed

Answer: a

2. In an NC machining operation, the tool has to be moved from point (5, 4) to point
(7, 2) along a circular path with centre at (5, 2). Before starting the operation, the
tool is at (5, 4). The correct G and N codes for this motion are
A. N010GO3X7.0Y2.0I5.0J2.0
B. N010GO2X7.0Y2.0I5.0J2.0
C. N010GO1X7.0Y2.0I5.0J2.0
D. N010GOOX7.0Y2.0I5.0J2.0

Answer: b.
3. The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10)
while performing an operation. The centre of the arc is at (10, 5). Which one of the
following NC tool path command performs the above mentioned operation?
A. N010 GO2 X10 Y10 X5 Y5 R5
B. N010 GO3 X10 Y10 X5 Y5 R
C. N010 GO1 X5 Y5 X10 Y10 R5
D. N010 GO2 X5 Y5 X10 Y10 R5

Answer: a.
4. NC contouring is an example of
A. continuous path positioning
B. point-to-point positioning
C. absolute positioning
D. incremental positioning

Answer: a

5. In a CNC program block, N002 GO2 G91 X40 Z40……,GO2 and G91 refer to
A. circular interpolation in counterclockwise direction and incremental dimension
B. circular interpolation in counterclockwise direction and absolute dimension
C. circular interpolation in clockwise direction and incremental dimension
D. circular interpolation in clockwise direction and absolute dimension

Answer: c.
6. Numerical control ___________
A. applies only to milling machines
B. is a method for producing exact number of parts per hour
C. is a method for controlling by means of set of instructions
D. none of the mentioned

Answer: c

7. Computer will perform the data processing functions in


A. NC
B. CNC
C. DNC
D. None of the mentioned

Answer: b

8. Control loop unit of M.C.U is always


A. a hardware unit
B. a software unit
C. a control unit
D. none of the mentioned

Answer: a

10. The repeatability of NC machine depends on


a) control loop errors
b) mechanical errors
c) electrical errors
d) none of the mentioned
View Answer
Answer: b
Explanation: None.
11. Rotation about Z-axis is called
a) a-axis
b) b-axis
c) c-axis
d) none of the mentioned
View Answer
Answer: c
Explanation: Rotation about X-axis is called a-axis.
Rotation about Y-axis is called b-axis.
Rotation about Z-axis is called c-axis.
12. Rotation of spindle is designated by one of the following axis:
a) a-axis
b) b-axis
c) c-axis
d) none of the mentioned
View Answer
Answer: d
Explanation: None.
13. The linking of computer with a communication system is called
a) networking
b) pairing
c) interlocking
d) assembling
View Answer
Answer: a
Explanation: Networking is the practice of linking two or more computing devices together for
the purpose of sharing data.
Pairing is the linking of computer with a communication system.
Interlocking is to fit into each other, as parts of machinery, so that all action is synchronized.
14. The process of putting data into a storage location is called
a) reading
b) writing
c) controlling
d) hand shaking
View Answer
Answer: b
Explanation: Reading is the process of copying data from a memory location.
Writing is the process of putting data into a storage location.
15. The process of copying data from a memory location is called
a) reading
b) writing
c) controlling
d) hand shaking
View Answer
Answer: a
Explanation: Reading is the process of copying data from a memory location.
Writing is the process of putting data into a storage location.

You might also like