Xeta9 Series 900 MHz

10 kbps – 4.4 Mbps

Unlicensed & Licensed Software Defined Radio
The Xeta9 series is a dual band ISM/MAS 902 – 960 MHz software defined radio that features Dynamic Modulation, flexible
configuration options and multi-layer Ethernet capabilities including VLAN and Routing.
The Xeta9 selectively switches modulation based on link quality and environmental noise. This Dynamic Modulation allows for
data rates from 57 kbps – 4.4 Mbps in the unlicensed ISM band using 76 kHz – 1.2 MHz channel sizes and power output from
50 mW – 1 W. MAS operation offers 10 – 210 kbps data rates using 12.5/25/50 kHz channels and power output of 50 mW – 4 W.
With built-in support for MultiSpeed MultiPoint™ networks, the Xeta9 enables both high and low speed remotes to operate on
the same network with a single access point. This new capability empowers wireless network planners to add video cameras
and other higher data-rate monitoring systems to their SCADA infrastructure without the need to build separate radio networks
for these devices.
Multi-Master Sync (MMS) network synchronization precisely controls the transmission
timing within a multiple Master network to eliminate self-interference.
Seamless Serial allows serial remotes to communicate over-the-air with an Ethernet
access point, while also improving data capacity when using 12.5 kHz MAS.
Based on its patent pending Dual Decode Digital Architecture™, XetaWave’s
technology platform offers performance second to none in the commercial market today.

Technology Differentiators Industry Applications

High Speed 10 kbps – 4.4 Mbps over-the-air data rates. XetaWave’s Oil & Gas
proprietary DSM technology offers the industry’s highest data rate in
· Increased bandwidth for expanding IP-based
a 12.5 kHz channel (57kbps). The Xeta-XX offers 8.8 Mbps data rate.
control systems & video monitoring.
Dual Band 902 – 928 / 928 – 960 MHz frequency support enables · Unified serial and IP/Ethernet infrastructure
both ISM unlicensed and MAS licensed applications with a single · Licensed option for congested unlicensed areas.
radio.
Dual Radio Support for optional 2nd RF Module (of any Xeta Series) in Energy
a single enclosure provides enhanced repeater functionality, higher · 100% testing over full -40°C to +75°C ISM & -40°C to
throughput rates and multi-band / multi-frequency operations. +60°C MAS operating range ensures reliable
Link Adaptation Dynamic data rate automatically adapts communications across the harshest environments.
communication parameters to achieve optimal link performance. Contact XetaWave for lower temperature
operation.
Multi-Speed Multi-Point Unique to XetaWave, a single radio can
have multi-logical data channels with different speeds, providing
configuration and installation flexibility such that long range or high Industrial Controls
speed can be prioritized. · Optional I/O allows seamless integration of ModBus
Ethernet Switch The Xeta9-EL acts like a switch, making more RTU, ModBus TCP, and DNP3 protocols into a unified
efficient use of RF bandwidth when compared to other “bridge” wireless network.
products. Two independent Ethernet ports and up to two RF
Modules, each with full VLAN support, allow multiple logical Electric Power
networks to exist within the same physical system. · Distribution Automation
IP Routing Layer 3 Static Routing provides Ethernet traffic · Substation Automation
management over the RF links, especially useful when mixing ISM · SCADA
DTS with narrowband MAS networks. · Grid Sensors
· Voltage Optimization
Serial Services Enables integration of hybrid networks utilizing both
Ethernet and legacy Serial devices through TCP Terminal Server, TCP
Terminal Client, UDP Terminal, and Modbus RTU Server capabilities. Water & Wastewater
IO Services Enables integration of Digital / Analog inputs and · Multi-Megabit data rates allows for more frequent
outputs with control and monitoring via Modbus TCP with ASCII/RTU polling and the ability to add video monitoring in
support. critical locations.
· Standard AES 256 bit encryption support secures
Onboard Diagnostics Built-in diagnostic support with tools such as
critical communications channels from unauthorized
RF Ping, RF Throughput, and Neighbor List in combination with SNMP.
use and interception.
3 Watts Adjustable power output from 10 mW – 3 W (10 – 34.8 dBm)

January 2018 | 258 S Taylor, Louisville, CO 80027 | Ph: 303.447.2745 | [email protected] 1

 Xeta9 Series 900 MHz
Technical Specifications
Transmitter ISM MAS
Frequency Range - 902 – 928 MHz: FHSS & DTS 928 – 960 MHz
Output Power - 50 mW – 1 W (17 – 30 dBm) 50 mW – 3 W (17 – 34.8 dBm)

Modulations - MSK 2FSK BPSK QPSK MSK 4FSK QPSK 8PSK

8PSK 16PSK 16QAM 32QAM 16QAM 32QAM 64QAM
RF Data Rate - 57 kbps – 4.4 Mbps 10 kbps – 210 kbps
Occupied Bandwidth - FHSS: 76 / 154 / 207 / 310 kHz 12.5 / 25 / 50 kHz
DTS: 600 / 900 / 1200 kHz
Frequency Stability - 1.0 ppm 1.0 ppm
Duty Cycle - Continuous Continuous
Output Impedance - 50 Ohms 50 Ohms
Range - 70+ miles 70+ miles
Receiver ISM MAS
Sensitivity - FHSS (Channel Size) 12.5 kHz 25 kHz
-110 @ MSK 57 kbps (76.45 kHz) -115 @ MSK 10 kbps -112 @ MSK 19 kbps
-107 @ MSK 114 kbps (154.29 kHz) -102 @ 4FSK 19 kbps -100 @ 4FSK 39 kbps
-106 @ MSK 153 kbps (207.11kHz) -103 @ QPSK 23 kbps -106 @ QPSK 36 kbps
-103 @ MSK 229 kbps (309.97 kHz) -97 @ 8PSK 34 kbps -100 @ 8PSK 52 kbps
-93 @ 16QAM 45 kbps -97 @ 16QAM* 70 kbps
DTS (Channel Size) -89 @ 32QAM 57 kbps -93 @ 32QAM* 87 kbps
-99 @ BPSK 530 kbps (600 kHz) -86 @ 64QAM* 105 kbps
-98 @ 2FSK 663 kbps (900 kHz) 50 kHz
-98 @ BPSK 884 kbps (1.2 MHz) -109 @ MSK 39 kbps
-97 @ QPSK 1061 kbps (600 kHz) -102 @ QPSK 71 kbps
-91 @ 8PSK 1591 kbps (600 kHz) -97 @ 8PSK 101 kbps
-95 @ QPSK 1768 kbps (1.2 MHz) -94 @ 16QAM* 137 kbps
-87 @ 16QAM 2121 kbps (600kHz) -90 @ 32QAM* 175 kbps
-90 @ 8PSK 2651 kbps (1.2 MHz) -84 @ 64QAM* 210 kbps
-81 @ 32QAM 2651 kbps (600 kHz)
-86 @ 16QAM 3535 kbps (1.2 MHz) * 25 KHz and 50 KHz QAM modes limited to 1W Transmit Power
-83 @ 16PSK 3535 kbps (1.2 MHz)
-81 @ 32QAM 4419 kbps (1.2 MHz)
RF Selectivity - 50dB 33dB (MSK 12.5 KHz) / 30dB (MSK 25 / 50 KHz)
Data Transmission
Error Detection - Up to 32-bit CRC, Retransmit on Error Data Encryption1 - AES128 / AES 256
Data Interfaces1 - Up to 2 x 10/100Mbps Ethernet Data Connector 1 - 4 x RJ45
Up to 2 x RS232/422/485 Serial Ports
Serial Interface Speed1 - up to 230.4 kbps 1 Does not apply to Xeta9m-T RF Module
Power / Physical
Operating Voltage - Xeta9, Xeta9x9, Emancipator, INS and XX: 10-32VDC with reverse polarity protection to 32 VDC
Xeta9m-T: 7.5VDC + 0.5V with no reverse polarity protection
Power Consumption (average mA) @ 12VDC
· Xeta9-E/EL (1W/3W) - Transmit : 335/495 mA Receive: 290/380 mA Idle: 270/210 mA
· Xeta9x9-E/EL (1W/3W) - Transmit : 385/580 mA Receive: 300/421 mA Idle: 292/293 mA
· Xeta9x-E/EL (1W) - Transmit : 204 mA Receive: 141 mA Idle: 103 mA

RF Connector - Enclosed: TNC Board Level: SMA Module: MMCX

Dimensions (L x W x H) - Enclosed: 6.625 " x 3.45 " x 1.835 " / 16.83 cm x 8.76 cm x 4.66 cm
Board Level: 5.125 " x 3.75 " x 1.000 " / 12.8 cm x 6.5 cm x 0.25 cm with optional DIN Rail Mount

Weight - Xeta9-E/EL 1.54 lbs / 0.70 kg, Xeta9x9-E/EL 1.61 lbs / 0.73 kg, Xeta9m-T 0.05 lbs / 24 grams
Xeta9x-E/EL 0.37 lbs / 0.17 kg with optional DIN Rail Mount
Environmental
Operating Temp Range - -40°C to +75°C ISM & -40°C to +60°C MAS. Contact XetaWave for lower temperature operation.
Humidity - 95% operating humidity @ 40°C non-condensing. UL Class 1 Div 2 approved

January 2018 | 258 S Taylor, Louisville, CO 80027 | Ph: 303.447.2745 | [email protected] 2

 Xeta9 Series 900 MHz
Xeta9 Series
Xeta9-E / Xeta9-EL
· Single RF Module
· Dual Band; ISM & MAS 902 – 960 MHz
· 57 kbps – 4.4 Mbps ISM Data Rates with 1W Max RF Xmit Power
· 10 kbps – 210 kbps MAS Data Rates with 3W Max RF Xmit Power
· uTasker or Linux Operating System
· HTTP/HTTPS
· VLANs
· IP Routing (Linux)
· Store & Forward Repeater Capabilities
· 2 x 10/100 Mbps Ethernet Ports
· 2 x RS232/422/485 Serial Ports
· TCP Terminal Server, TCP Terminal Client, UDP Terminal and
Modbus RTU Server capabilities
· IO support for DI1 and External Trigger input for MMS Dimensions (L x W x H): 6.625 " x 3.45 " x 1.835 " / 16.83 cm x 8.76 cm x 4.66 cm
· Management; Configuration Files, Diagnostics and SNMP Weight 1.54 lbs / 700 grams
Xeta9x9-E / Xeta9x9-EL
· Dual RF Module – can be installed as a Repeater or dual-AP
· Dual Band; ISM & MAS – can use both bands simultaneously
· 57 kbps – 4.4 Mbps ISM Data Rates with 1W Max RF Xmit Power
· 10 kbps – 210 kbps MAS Data Rates with 3W Max RF Xmit Power
· uTasker or Linux Operating System
· HTTP/HTTPS
· VLANs
· IP Routing (Linux)
· Back to Back AND Store & Forward Repeater Capabilities
· 2 x 10/100 Mbps Ethernet Ports
· 2 x RS232/422/485 Serial Ports
· TCP Terminal Server, TCP Terminal Client, UDP Terminal and
Modbus RTU Server capabilities
· IO support for DI1 and External Trigger input for MMS Dimensions (L x W x H): 6.625 " x 3.45 " x 1.835 " / 16.83 cm x 8.76 cm x 4.66 cm
· Management; Configuration Files, Diagnostics and SNMP Weight 1.61 lbs / 730 grams
Xeta9x-E / Xeta9x-EL (Emancipator +)
· Board Level with optional DIN Rail Mount
· ISM only 902 – 928 MHz
· 57 kbps – 2.6 Mbps ISM Data Rates with 1W Max RF Xmit Power
· Low Power Modes; consumption down to 85mA @ 12VDC
· uTasker or Linux Operating System
· HTTP/HTTPS
· VLANs
· IP Routing (Linux)
· Store & Forward Repeater Capabilities
· 1 x 10/100 Mbps Ethernet Port
· 1 x RS232/422/485 Serial Port
· TCP Terminal Server, TCP Terminal Client, UDP Terminal and
Modbus RTU Server capabilities Dimensions* (L x W x H): 5.125 " x 3.75 " x 1.000 " / 12.8 cm x 6.5 cm x 0.25 cm
· No IO support Weight* 0.37 lbs / 170 grams
· Management; Configuration Files, Diagnostics and SNMP
* with optional DIN Rail Adapter

Xeta9m-T
· OEM RF Module only Dimensions (L x W x H) 2.0 " x 1.4 " x 0.37 " / 5.1 cm x 3.5 cm x 0.94 cm
· Dual Band; ISM & MAS 902-960 MHz Weight 0.05 lbs / 24 grams
· 7.5 VDC + 0.5 V
· CMOS / RS232 Interface
· Transmit Current <1.0 A @ 7.5 VDC for 1 W RF
· Transmit Current <3.0 A @ 7.5 VDC for 3 W RF
· Receive Current <275 mA @ 7.5 VDC for 1 W RF
· Idle Current <150 mA @ 7.5 VDC
· Sleep Current <50 mA @ 7.5 VDC
· Serial Interface Speed 2 Mbps CMOS / 1 Mbps RS232
· 24-pin Samtec MTMM-112-05-L-D-159 power/data connector
· MMCX RF connector

January 2018 | 258 S Taylor, Louisville, CO 80027 | Ph: 303.447.2745 | [email protected] 3

 Xeta9 Series 900 MHz
Xeta9 Series
Xeta9-INS
· Migration path to next generation high performance XetaWave
Dimensions (L x W x H): 6.625 " x 3.45 " x 1.835 " / 16.83 cm x 8.76 cm x 4.66 cm
technology. A XetaWave network can be overlaid on top of the
Weight 1.61 lbs / 730 grams
legacy system with precisely timed transmissions to eliminate
interference. End Points can then be upgraded as time and
resources permit. No need to rip and replace.
· Single RF Module and Combining/Sensing Module
· Less than 2 dB insertion loss for existing non-XetaWave radios
transmission
· 0 to 6 dB settable receive gain
· 40 dB + isolation between radios; uses ferrite isolators – a first for
the industry
· Better than 20 dB return loss regardless of antenna VSWR
· Extremely high receive input 1 dB compression point of +10 dBm
· Operates only in DTS modes to avoid FCC restrictions on
synchronization
Refer to Xeta9-INS Data & Application Sheet for detailed specifications

Xeta9-XX
· Dual RF Module / Single Antenna Dimensions (L x W x H): 6.625 " x 3.45 " x 1.835 " / 16.83 cm x 8.76 cm x 4.66 cm
· ISM only 902 – 928 MHz Weight 1.60 lbs / 720 grams
· 115 kbps – 8.8 Mbps RF Data Rates
· VLANs Up to 8.8 Mbps RF Data Rate
· Repeater Capabilities
· 2 x 10/100 Mbps Ethernet Ports
· 2 x RS232/422/485 Serial Ports
· TCP Terminal Server, TCP Terminal Client capabilities
· IO support for DI1 and External Trigger input for MMS
· Management; Web GUI and Diagnostics
· At the 50% interference level the user can expect the same
throughput as a standard Xeta9-EL operating in an
interference free band
· Where the interference level is lower the data throughput of
the radio increases up to twice that of a standard Xeta9-EL
Refer to Xeta-XX Data & Application Sheet for detailed specifications

Contact

For more information or to schedule a demo, please contact us at 408-642-5458 or [email protected]

Distributed by:
Elevate Wireless
Tel.: 408-642-5458
Email: [email protected]
XetaWave provides an industry leading 3 year
warranty on its products.

All XetaWave radios are 100% designed,

manufactured, and tested at its headquarters in
Louisville, Colorado, USA.

January 2018 | 258 S Taylor, Louisville, CO 80027 | Ph: 303.447.2745 | [email protected] 4