400

GATE OPERATOR
VOLT
BIG 18QI
For gates up to 2500 Kg

500BIG18QI

400 V three-phase sliding gate operator complete

with electronic control unit. Maximum gate weight
2500 kg. STAINLESS STEEL housing.

See page 25 for accessories

Features:
• commercial use
• for gates up to 2500 kg
• 400 V three-phase gate operator
• STAINLESS STEEL housing
• manual release mechanism Technical features BIG18QI
• adjustable mechanical clutch Power supply 400 V AC (50 - 60 Hz)
Motor power supply 400 V AC
Absorption 3A
Pros:
Power rating 1000 W
• suitable for large sliding gates Speed maneuver 10 m/min
• high torque and power thanks Duty cycle 55 %
to the three-phase technology Max. thrust 1850 N
• self-ventilated operator to increase Operating temperature -20° C ÷ +55° C
the working cycle Motor thermal protection 150° C
• metal and bronze gears to increase Degree of protection IP 54
endurance and reduce noise Max. gate leaf weight 2500 kg
Pinion module Module 4
Electornic control unit D703

420

99

262 312
312

The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 12445-
12453 standards.

22
 400
O P E R AT O R

BIG 30Q
For gates up to 3500 Kg
VOLT

500BIG30Q

400 V three-phase sliding gate operator complete

with electronic control unit. Maximum gate weight
3500 kg.

See page 25 for accessories

Features:
• commercial use
• for gates up to 3500 kg
• 400 V three-phase gate operator
• oil bath vertical pinion operator
Technical features BIG30Q • painted steel housing
Power supply 400 V AC (50 - 60 Hz) • manual release mechanism
Motor power supply 400 V AC
• mechanical clutch for crush prevention
Absorption 3,6 A
Absorbed power 1500 W
Speed maneuver 12,5 m/min
Pros:
Duty cycle 50 % • suitable for large sliding gates
Max. thrust 3500 N • high torque and power thanks
Operating temperature -20° C ÷ +55° C to the three-phase technology
Motor thermal protection 150° C • self-ventilated operator to increase
Degree of protection IP 54 the working cycle
Max. gate leaf weight 3500 kg • metal and bronze gears to increase
Pinion module Module 4 endurance and reduce noise
Electornic control unit D703

573

179

300 370
352,5
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 12445-
12453 standards.

23
400
GATE OPERATOR
VOLT
BIG
For gates up to 4000 Kg
40Q

500BIG40Q

400 V three-phase sliding gate operator for inten-

sive use complete with electronic control unit and
“soft-start”. Maximum gate weight 4000 kg.

Features:
• commercial use
• for gates up to 4000 kg
• 400 V three-phase gate operator
• oil bath vertical pinion operator
• soft start acceleration ramp and soft stop
• manual release mechanism
• Module 6 rack pinion version
available upon request
• mechanical clutch for crush prevention
Technical features BIG40Q
Power supply 400 V AC (50 - 60 Hz)
Pros:
Motor power supply 400 V AC
• suitable for huge sliding gates Absorption 3,6 A
• high torque and power thanks to the Power rating 1500 W
three-phase technology Max. operating speed 12,5 m/min
• self-ventilated operator to increase Duty cycle 50 %
the working cycle Max. thrust 3500 N
• metal and bronze gears to increase Operating temperature -20° C ÷ +55° C
endurance and reduce noise Motor thermal protection 150° C
• intensive use (50% duty cycle) Degree of protection IP 54
Max. gate leaf weight 4000 kg
Pinion module Module 4
Electornic control unit D703

616

179

370 440
422
The above represented installation does not include safety devices such as safety edges. Their
addition depends upon the risk assessment made on any installation in accordance with EN 12445-
12453 standards.

24
M A D E I N I T A LY

Accessories for “BIG” series of Sliding Gate Operators

400CP12 S-600D703M00
BIG18QI counterplate 230/400 V replacement
electronic control unit for
one gate operator with
electrical brake

400CP30 400CFZ22
BIG30Q counterplate Steel rack 22x22 (Module 4,
max 3000 kg)

400CP40 400VSF20
BIG40Q counterplate Screws and brackets for
400CFZ22 (40 units per
pkg)

900BSD15 550CFZ06
Deformable safety edge kit Steel rack 30x30 (Module 6,
l=1,5 m max 4000 kg)

900BSD20 M-ING0000Z12BIG
Deformable safety edge kit Pinion module 6
l=2 m (BIG30Q/40Q)

900TWC C-TARG
Wireless safety edge Aluminium CE mark label,
transmitter self adhesive

900TWM 750COL
Wireless safety edge Control unit mounting post
master receiver

Further accessories:
700BAP4 250RXSM2
Transmitters page 110
Gate stopper with spring Self-learning, two-channel,
Photocells page 116
433,92 MHz plug-in radio
Flashing lights page 119
receiver. Accepts up to 14 rolling
code transmitters or unlimited
dipswitch transmitters.

C-CRT 250SM126
Warning signal Memory card for 126 radio
codes

25