Scribd
Upload
401 views

Learning Activity Sheet Module1 CSS 1.0

This document provides a learning activity sheet for students on identifying and using hand tools in electronics technology. It includes an introductory concept on hand tools, learning objectives, activities with true/false and multiple choice questions to test knowledge of various tools, scoring rubrics, answers, and references. The activities require students to identify correct and incorrect statements about tools, and select the appropriate tool for different tasks like loosening screws or removing small parts.

Uploaded by

Rai Masamune
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
401 views

Learning Activity Sheet Module1 CSS 1.0

This document provides a learning activity sheet for students on identifying and using hand tools in electronics technology. It includes an introductory concept on hand tools, learning objectives, activities with true/false and multiple choice questions to test knowledge of various tools, scoring rubrics, answers, and references. The activities require students to identify correct and incorrect statements about tools, and select the appropriate tool for different tasks like loosening screws or removing small parts.

Uploaded by

Rai Masamune
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Republic of the Philippines

Department of Education
Region V- Bicol
TLE JH/SHS-Department

LEARNING ACTIVITY SHEETS NO. 1

NAME OF STUDENTS :
LEARNING AREA – Grade Level: TLE CSS Grade 8
DATE: _____________________________________

I. Introductory Concept:
In this lesson, you learned about different hand tools used in electronics technology, definition
of terms, its classification and usages.

II. Learning Skills from the MELCs:

Grading MELC K CG Codes


Period
First Quarter At the end of the lesson the learner are expected to; Computer
Week1 Module1 * Identify tasks to be undertaken properly System
* Identify and select appropriate hand tools according to the task requirements
Servicing 1
* Check appropriate hand tools for proper operation and safety
* Identify and mark unsafe or faulty tools for repair according to standard K to 12 – Technology
company procedure. and Livelihood
Education

III. Activities:

A. Direction. Write TRUE if the statement is correct and FALSE if it is wrong. Write your answers on a
separate sheet of paper.

_______ 1. Selecting the best tool for each task requires training in the proper use of the tools, field
experience in their safe use, and following the manufacturer’s guidance and instructions for that
specific tool.
_______ 2. When obtaining the tool, all the associated tooling and consumable parts, as
recommended by the manufacturer, must be included.
_______ 3. The safe use of a tool depends on using the tool for the purpose for which it was
designed and also for other purposes where it can be used as substitute where tool is not available.
_______ 4. All tools should be kept in good condition with regular maintenance.
_______ 5. Preparing for a task includes only knowing the task to be done.
_______ 6. Preparing for a task includes also the sequence of tasks to be done

Rubrics for Scoring:

Scoring Rubrics
With perfect score of 10 ………………………….. 5
With 1 mistake …………………………………….. 4
With 2 – 3 mistakes ………………………………… 3
With 4 – 5 mistakes ……………………………….. 2
With more than 5-6 mistakes ………………………. 1

Task 2B. Direction. Select the letter of the correct answer. Write your answers on a separate
sheet of paper.
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter

2. Which tool is used to loosen or tighten cross-head screws?

a. Anti-static mat c. Philips head screwdriver b. Hex driver d. Wire cutter

3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a
screwdriver tightens screws?

a. Anti-static mat c. Philips head screwdriver b. Hex driver d. Wire cutter

4. Which tool is used to strip and cut wires?

a. Anti-static mat c. Philips head screwdriver b. Hex driver d. Wire cutter

5. Which tool is used to retrieve parts from location that are too small for your hand to fit?

a. Part Retriever c. Cable ties


b. Lint-free Cloth d. Flat head screwdriver

6. Which tool is used to clean different computer components without scratching or leaving debris?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver

7. Which tool is used to bundle cables neatly inside and outside of a computer?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver

8. Which tool is used to loosen or tighten slotted screws?


a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver

9. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a
feature that is mainly found on laptop?
a. Anti-static mat c. Philips head screwdriver b. Torx screwdriver d. Wire cutter

10. Which tool is used to blow away dust and debris from different computer parts without touching
the components?
a. Anti-static mat c. Compressed air
b. Hex driver d. Wire cutter

MY ANSWER:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Scoring Rubrics
With perfect score of 8 ………………………….. 5
With 1 mistake …………………………………….. 4
With 2 – 3 mistakes ………………………………… 3
With 4 – 5 mistakes ……………………………….. 2
With more than 5 mistakes ………………………. 1

IV. Answer Key:

Test A. 1. True 2. True 3. False 4. True 5. False 6. True


Test B.
1. A - Antistatic mat
2. C – Philips head screwdriver
3. B – Hex driver
4. D – Wire cutter
5. A – Part retriever
6. B – Lint-free cloth
7. C – Cable ties
8. D – Flat head screwdriver
9. B – Torx screwdriver
10. C – Compressed air

V. References:

Computer System Servicing 1


K to 12 – Technology and Livelihood Education

Prepared by:

Teacher II

You might also like