Scribd
Upload
181 views

Short Answer Questions-II (PYQ)

1) The document contains short answer questions related to various concepts in physical chemistry such as molality, molarity, freezing point depression, boiling point elevation, osmotic pressure, etc. 2) Questions 1-7 ask the student to calculate values like molality, molarity, freezing/boiling points based on given information like mass of solute and solvent, change in freezing/boiling point, etc. 3) Questions 1-4 in the second section are one mark questions that test concepts like which has higher concentration between 1 M and 1 m solutions and calculating boiling point of an aqueous solution. 4) Questions 5-7 in the second section are multi-step calculations

Uploaded by

ashok pradhan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
181 views

Short Answer Questions-II (PYQ)

1) The document contains short answer questions related to various concepts in physical chemistry such as molality, molarity, freezing point depression, boiling point elevation, osmotic pressure, etc. 2) Questions 1-7 ask the student to calculate values like molality, molarity, freezing/boiling points based on given information like mass of solute and solvent, change in freezing/boiling point, etc. 3) Questions 1-4 in the second section are one mark questions that test concepts like which has higher concentration between 1 M and 1 m solutions and calculating boiling point of an aqueous solution. 4) Questions 5-7 in the second section are multi-step calculations

Uploaded by

ashok pradhan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Short Answer Questions-II

Short Answer Questions-II (PYQ)


Q.1. A solution of glucose (molar mass = 180 g mol–1) in water is labelled as 10%
(by mass). What would be the molality and molarity of the solution?

[CBSE (AI) 2014] [HOTS]

(Density of solution = 1.2 g mL–1)

Ans.
Q.2. At 25°C the saturated vapour pressure of water is 3.165 kPa (23.75 mm Hg).
Find the saturated vapour pressure of a 5% aqueous solution of urea (carbamide)
at the same temperature. (Molar mass of urea = 60.05 g mol–1)

[CBSE (F) 2012]

Ans.

Q.3. Calculate the freezing point of a solution when 3 g of CaCl2 (M = 111 g mol–1)
was dissolved in 100 g of water, assuming CaCl2 undergoes complete ionisation.
(Kf for water = 1.86 K kg mol–1)

[CBSE East 2016]

Ans.
Q.4. 3.9 g of benzoic acid dissolved in 49 g of benzene shows a depression in
freezing point of 1.62 K.

Calculate the van’t Hoff factor and predict the nature of solute (associated or
dissociated).

(Given: Molar mass of benzoic acid = 122 g mol–1, Kf for benzene = 4.9 K kg mol–1)

[CBSE Delhi 2015]

Ans.
Q.5. A solution of glucose (Molar mass = 180 g mol–1) in water has a boiling point
of 100.20°C. Calculate the freezing point of the same solution. Molal constants for
water Kf and Kb are 1.86 K kg mol–1 and 0.512 K kg mol–1respectively.

[CBSE (F) 2017]

Ans.

Q.6. Calculate the boiling point of solution when 2 g of Na2SO4 (M = 142 g mol–1)
was dissolved in 50 g of water, assuming Na2SO4 undergoes complete ionisation.

(Kb for water = 0.52 K kg mol–1)

[CBSE North 2016]

Ans.
Q.7. Calculate the mass of NaCl (molar mass = 58.5 g mol–1) to be dissolved in 37.2
g of water to lower the freezing point by 2°C, assuming that NaCl undergoes
complete dissociation.

(Kf for water = 1.86 K kg mol–1)

[CBSE (F) 2015]

Ans.

Substituting Kf = 1.86 K kg mol–1, WA = 37.2 g, MB = 58.5 g mol–1, i = 2, ΔTf = 2°C or 2 K


in the equation,

Short Answer Questions-II (OIQ)

Q.1 Which aqueous solution has higher concentration—1 molar or 1 molal


solution of the same solute? Give reason.

[HOTS]

Ans. Here density determines the relative concentrations of the solutions.

Case (i): When density of solvent is 1 g/mL: In aqueous solution, density of water is
normally taken as 1. This means that 1 m solution has 1 mole of the solute dissolved in
1000 g or 1000 mL of the solvent. At the same time 1 M solution contains 1 mole of the
solute in 1000 mL solution, which is the volume of both the solute and solvent present in
the solution. This clearly shows that the solvent present in 1 M solution is less as
compared to 1 m solution. Therefore, 1 M solution is more concentrated than 1 m
solution.

Case (ii): When density of the solvent is less than 1 g/mL: This means that the volume
of solvent (mass/density) will be more as compared to its mass. Thus, 1 M solution will
be less concentrated than 1 m solution.
Case (iii): When density of the solvent is more than 1 g/mL: This means that the
volume of solvent will be less than its mass. Under these circumstances, 1 M solution
will be more concentrated than 1 m solution.

Q.2. Calculate the boiling point of a 1 M aqueous solution (density 1.04 g mL–1) of
potassium chloride

(Kb for water = 0.52 K kg mol–1, Atomic masses: K = 39 u, Cl = 35.5 u)

Assume, potassium chloride is completely dissociated in solution.

[CBSE Sample Paper 2016]

Ans. Mass of solution = Density of solution × Volume of solution

= 1.04 g mL–1 × 1000 mL = 1040 g

Molar mass of solute KCl, MB = 39 + 35.5 = 74.5 g mol–1

∴ Mass of solvent water, WA = 1040 g – 74.5 g = 965.5 g

= 374.227 K

Q.3. A decimolar solution of potassium ferrocyanide is 50% dissociated at 300 K.


Calculate the osmotic pressure of the solution. (R = 8.314 J K–1 mol–1).

Ans.
Q.4. At 300 K, 36 g of glucose, C6H12O6 present per litre in its solution has an
osmotic pressure of 4.98 bar. If the osmotic pressure of another glucose
solution is 1.52 bar at the same temperature, calculate the concentration of
the other solution.

[CBSE Sample Paper 2017]

Ans.

You might also like