0% found this document useful (0 votes)
80 views2 pages

Hookes Law Introduction - Force of A Spring

Robert Hooke discovered Hooke's Law of elasticity, which states that the force exerted by a spring is proportional to the distance of its displacement from its resting position. The document describes an experiment measuring the force required to compress a spring by different distances. When graphed, the results show a linear relationship between force and displacement. This relationship is quantified by Hooke's Law equation, which defines the spring constant k as the measure of force required per unit of displacement. The spring constant can then be used to predict the force generated by the spring at any given displacement.

Uploaded by

Yuvraj Sinha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
80 views2 pages

Hookes Law Introduction - Force of A Spring

Robert Hooke discovered Hooke's Law of elasticity, which states that the force exerted by a spring is proportional to the distance of its displacement from its resting position. The document describes an experiment measuring the force required to compress a spring by different distances. When graphed, the results show a linear relationship between force and displacement. This relationship is quantified by Hooke's Law equation, which defines the spring constant k as the measure of force required per unit of displacement. The spring constant can then be used to predict the force generated by the spring at any given displacement.

Uploaded by

Yuvraj Sinha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Flipping Physics Lecture Notes:

Hooke's Law Introduction - Force of a Spring

Robert Hooke♦ (1635–1703) was an English scientist whose “research and


experiments ranged from astronomy to biology to physics; he is particularly
recognized for the observations he made while using a microscope and for
‘Hooke's Law’ of elasticity.” ♥ Hooke is also credited being the first to apply “the
word ‘cell’ to describe the basic unit of life.”♣

In our demonstration we are taking a spring and measuring the force it takes to
compress the spring a certain distance.

When we graph this data with the force of the spring on the y-axis and Push
the displacement of the spring on the x-axis, we get this result. Spring Force (N) Position (m)
0.9 -0.002
2.4 -0.004
3.7 -0.006
5.2 -0.008
6.0 -0.010
7.5 -0.012
9.2 -0.014
10.3 -0.016
11.5 -0.018
12.6 -0.020
14.5 -0.022

Hopefully you recognize that there is a linear relationship between the force and displacement of the spring.
! !
This relationship is called “Hooke’s Law”: Fs = −kx
• Fs is the force caused by the spring.
• k is called the “spring constant”.
!
! ! Fs N
o The spring constant usually has units of newtons per meter: Fs = −kx ⇒ k = − ! ⇒
x m
§ Note: It could be in newtons per cm, dynes per mm, pounds per furlong, etc.
o k is a measure of how much force it takes to compress or
expand a spring per linear meter.
o Sometimes I have seen it called “force constant”, however, I
will not call it that.
o The spring constant is always positive.
• x is the displacement from equilibrium position or rest position.
o Equilibrium position or rest position is where the spring is
located without any external force causing the spring to
compress or expand. It is where the spring is at “rest”.


https://en.wikipedia.org/wiki/File:13_Portrait_of_Robert_Hooke.JPG Interesting tidbit of information: “As no contemporary portrait

https://www.biography.com/people/robert-hooke-9343172

http://www.history-of-the-microscope.org/robert-hooke-microscope-history-micrographia.php

0248 Lecture Notes - Hooke's Law Introduction - Force of a Spring.docx page 1 of 2


! ! !
• The negative in the equation Fs = −kx indicates that the direction of, Fs , the force of the spring is
!
opposite the direction of, x , the displacement of the spring from equilibrium or rest position.

• Hooke’s Law means the force required to compress or expand a spring is linearly proportional to
the distance the spring is compressed or expanded.
• Going back to our original spring and data, the equation for the best-fit line of the graph is
! ! N
Fs = −640 x , that means the spring constant of that spring, k = 640 . And we can use that
m
equation to predict data. For example:
!
o
!
( )(
Fs = −640 x = − 640 −0.019 = 12.16 ≈12N )
!
! ! ! Fs 11
o Fs = −640 x ⇒ x = − = − = −0.01719 ≈ -0.017m
k 640

• Restoring Force: The spring force is a


restoring force, a force that is always towards
equilibrium. In other words, the force tends to
bring the object back to the rest position.
• Elastic Limit: The maximum displacement
before the spring will be permanently
deformed. In other words, once the spring
reaches beyond its elastic limit, the spring will
no longer return to its original shape and
Hooke’s Law no longer holds true.
• Note: The AP Physics 1 equation sheet has
! !
Hooke’s Law as: Fs = k x . This gives only
the magnitude of the force of the spring and
ignores the direction.
! !
o I prefer to use Fs = −kx because it includes the direction of the force of the spring.

0248 Lecture Notes - Hooke's Law Introduction - Force of a Spring.docx page 2 of 2

You might also like