Model: DQKAA

Frequency: 60
Fuel type: Diesel
KW rating: 1750 standby
1600 prime
Emissions level: EPA NSPS Stationary Emergency Tier 2

h Generator set data sheet

Exhaust emission data sheet: EDS-1064

Exhaust emission compliance sheet: EPA-1098
Sound performance data sheet:
Cooling performance data sheet: MCP-157
Prototype test summary data sheet: PTS-267
Standard set-mounted radiator cooling outline: 0500-4392
Optional set-mounted radiator cooling outline:
Optional heat exchanger cooling outline: 0500-4393
Optional remote radiator cooling outline:

Standby Prime Continuous

Fuel consumption kW (kVA) kW (kVA) kW (kVA)
Ratings 1750 (2188) 1600 (2000)
Load 1/4 1/2 3/4 Full 1/4 1/2 3/4 Full Full
US gph 40 69 94 121 37 63 86 110
L/hr 151 261 356 458 140 238 326 416

Standby Prime Continuous

Engine rating rating rating
Engine manufacturer Cummins Inc.
Engine model QSK60-G6 NR2
Configuration Cast iron, V 16 cylinder
Aspiration Turbocharged and low temperature aftercooled
Gross engine power output, kWm (bhp) 2179 (2922) 1975 (2647)
BMEP at set rated load, kPa (psi) 2109 (306) 1885 (273)
Bore, mm (in) 159 (6.25)
Stroke, mm (in) 190 (7.48)
Rated speed, rpm 1800
Piston speed, m/s (ft/min) 11.4 (2244)
Compression ratio 14.5:1
Lube oil capacity, L (qt) 334 (304)
Overspeed limit, rpm 2100 ±50
Regenerative power, kW 168

Fuel flow
Maximum fuel flow, L/hr (US gph) 946 (250)
Maximum fuel inlet restriction, kPa (in Hg) 30 (9.0)
Maximum fuel inlet temperature, °C (°F) 71 (160)

©2010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc.
“Our energy working for you.” is a trademark of Cummins Power Generation. Specifications are subject to change without notice.
D-3335i (7/10)
 Standby Prime Continuous
Air rating rating rating
3
Combustion air, m /min (scfm) 156 (5563) 143 (5097)
Maximum air cleaner restriction, kPa (in H2O) 6.2 (25)
3
Alternator cooling air, m /min (cfm) 204 (7300)

Exhaust
3
Exhaust flow at set rated load, m /min (cfm) 379 (13518) 347 (12400)
Exhaust temperature, °C (°F) 469 (877) 463 (866)
Maximum back pressure, kPa (in H2O) 6.8 (27)

Standard set-mounted radiator cooling

Ambient design, °C ( °F) 50 (122)
Fan load, kWm (HP) 57 (77)
Coolant capacity (with radiator), L (US gal) 492 (130)
3
Cooling system air flow, m /min (scfm) 1922 (67870)
Total heat rejection, MJ/min (Btu/min) 81.05 (76875) 70.96 (67304)
Maximum cooling air flow static restriction, kPa (in H2O) 0.12 (0.5)
Maximum fuel return line restriction kPa (in Hg) 30 (9.0)

Optional set-mounted radiator cooling

Ambient design, °C (°F)
Fan load, kWm (HP)
Coolant capacity (with radiator), L (US gal)
3
Cooling system air flow, m /min (scfm)
Total heat rejection, MJ/min (Btu/min)
Maximum cooling air flow static restriction, kPa (in H2O)
Maximum fuel return line restriction, kPa (in Hg)

Optional heat exchanger cooling

Set coolant capacity, L (US gal)
Heat rejected, jacket water circuit, MJ/min (Btu/min)
Heat rejected, aftercooler circuit, MJ/min (Btu/min)
Heat rejected, fuel circuit, MJ/min (Btu/min)
Total heat radiated to room, MJ/min (Btu/min)
Maximum raw water pressure, jacket water circuit, kPa (psi)
Maximum raw water pressure, aftercooler circuit, kPa (psi)
Maximum raw water pressure, fuel circuit, kPa (psi)
Maximum raw water flow, jacket water circuit, L/min (US gal/min)
Maximum raw water flow, aftercooler circuit, L/min (US gal/min)
Maximum raw water flow, fuel circuit, L/min (US gal/min)
Minimum raw water flow at 27 °C (80 °F) inlet temp, jacket water
circuit, L/min (US gal/min)
Minimum raw water flow at 27 °C (80 °F) inlet temp, aftercooler circuit,
L/min (US gal/min)
Minimum raw water flow at 27 °C (80 °F) inlet temp, fuel circuit, L/min
(US gal/min)
Raw water delta P at min flow, jacket water circuit, kPa (psi)
Raw water delta P at min flow, aftercooler circuit, kPa (psi)
Raw water delta P at min flow, fuel circuit, kPa (psi)
Maximum jacket water outlet temp, °C (°F)
Maximum aftercooler inlet temp, °C (°F)
Maximum aftercooler inlet temp at 25 °C (77 °F) ambient, °C ( °F)
Maximum fuel return line restriction, kPa (in Hg)

Our energy working for you.™

www.cumminspower.com
©2010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc.
“Our energy working for you.” is a trademark of Cummins Power Generation. Specifications are subject to change without notice.
D-3335i (7/10)
 Standby Prime Continuous
Remote radiator cooling1 rating rating rating
Set coolant capacity, L (US gal)
Max flow rate at max friction head, jacket water circuit, L/min
1902 (502)
(US gal/min)
Max flow rate at max friction head, aftercooler circuit, L/min
606 (160)
(US gal/min)
Heat rejected, jacket water circuit, MJ/min (Btu/min) 43.95 (41685) 40.4 (38312)
Heat rejected, aftercooler circuit, MJ/min (Btu/min) 26.17 (24824) 20.83 (19755)
Heat rejected, fuel circuit, MJ/min (Btu/min)
Total heat radiated to room, MJ/min (Btu/min) 10.93 (10366) 9.7 (9238)
Maximum friction head, jacket water circuit, kPa (psi) 69 (10)
Maximum friction head, aftercooler circuit, kPa (psi) 48 (7)
Maximum static head, jacket water circuit, m (ft) 18 (60)
Maximum static head, aftercooler circuit, m (ft) 18 (60)
Maximum jacket water outlet temp, °C (°F) 104 (220) 100 (212)
Maximum aftercooler inlet temp at 25 °C (77 °F) ambient, °C (°F) 49 (120)
Maximum aftercooler inlet temp, °C (°F) 66 (150)
Maximum fuel flow, L/hr (US gph)
Maximum fuel return line restriction, kPa (in Hg) 30 (9.0)

Weights2
Unit dry weight kgs (lbs) 14628 (32249)
Unit wet weight kgs (lbs) 15155 (33410)

Notes:
1
For non-standard remote installations contact your local Cummins Power Generation representative.
2
Weights represent a set with standard features. See outline drawing for weights of other configurations.

Derating factors
Engine power available up to 1402 m (4600 ft) at ambient temperatures up to 40 °C (104 °F). Above these
Standby
elevations, derate at 4.5% per 305 m (1000 ft) and 11.0% per 10 °C (18 °F).
Engine power available up to 1402 m (4600 ft) at ambient temperatures up to 40 °C (104 °F). Above these
Prime
elevations, derate at 4.5% per 305 m (1000 ft) and 11.0% per 10 °C (18 °F).
Continuous

Ratings definitions
Emergency standby power Limited-time running power Prime power (PRP): Base load (continuous)
(ESP): (LTP): power (COP):

Applicable for supplying power Applicable for supplying power to Applicable for supplying power Applicable for supplying power
to varying electrical load for the a constant electrical load for to varying electrical load for continuously to a constant
duration of power interruption of limited hours. Limited Time unlimited hours. Prime Power electrical load for unlimited
a reliable utility source. Running Power (LTP) is in (PRP) is in accordance with ISO hours. Continuous Power (COP)
Emergency Standby Power (ESP) accordance with ISO 8528. 8528. Ten percent overload is in accordance with ISO 8528,
is in accordance with ISO 8528. capability is available in ISO 3046, AS 2789, DIN 6271
Fuel Stop power in accordance accordance with ISO 3046, and BS 5514.
with ISO 3046, AS 2789, DIN AS 2789, DIN 6271 and BS 5514.
6271 and BS 5514.

Our energy working for you.™

www.cumminspower.com
©2010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc.
“Our energy working for you.” is a trademark of Cummins Power Generation. Specifications are subject to change without notice.
D-3335i (7/10)
Alternator data
Single Max
Temp rise phase surge Winding Alternator Feature
1 2 3 4
Voltage Connection degrees C Duty factor kVA No. data sheet Code
380 Wye, 3-phase 150/125/105 S/P/C 7327 13 ADS-335 B595
380 Wye, 3-phase 125/105/80 S/P/C 7327 13 ADS-515 B598
380 Wye, 3-phase 125/105 P/C 7327 312 ADS-334 B596
380 Wye, 3-phase 105/80 P/C 7327 312 ADS-335 B659
380 Wye, 3-phase 105/80 S/P 7327 13 ADS-515 B599
380 Wye, 3-phase 80 S 7963 13 ADS-515 B660
440 Wye, 3-phase 125/105/80 S/P/C 7361 312 ADS-333 B663
480 Wye, 3-phase 125/105/80 S/P/C 7361 312 ADS-333 B462
480 Wye, 3-phase 105/80 S/P 7695 312 ADS-334 B463
480 Wye, 3-phase 125/105 P/C 6716 312 ADS-332 B464
480 Wye, 3-phase 105 S 7695 19 ADS-517 B796
480 Wye, 3-phase 80 S 7361 312 ADS-334 B601
480 Wye, 3-phase 80 P 7361 312 ADS-334 B694
600 Wye, 3-phase 125/105/80 S/P/C 7361 07 ADS-333 B465
600 Wye, 3-phase 105/80 S/P 7695 07 ADS-334 B301
600 Wye, 3-phase 125/105 P/C 6716 07 ADS-332 B466
600 Wye, 3-phase 80 S 7265 07 ADS-334 B604
4160 Wye, 3-phase 125/105/80 S/P/C 6307 51 ADS-324 B467
4160 Wye, 3-phase 105/80 S/P 6307 51 ADS-518 B313
4160 Wye, 3-phase 105 S 6307 51 ADS-324 B491
4160 Wye, 3-phase 105 S 6307 51 ADS-520 B795
4160 Wye, 3-phase 80 S 6307 51 ADS-518 B605
12470-13800 Wye, 3-phase 125/105/80 S/P/C 6062 91 ADS-521 B448
12470 Wye, 3-phase 105/80 S/P 6062 91 ADS-521 B447
12470 Wye, 3-phase 80 S 6685 87 ADS-521 B607
13200-13800 Wye, 3-phase 80 S 8012 91 ADS-521 B628
13800 Wye, 3-phase 105 S 6062 99 ADS-523 B797

Notes:
1
Limited single phase capability is available from some three phase rated configurations. To obtain single phase rating, multipy the three phase
3
kW rating by the Single Phase Factor . All single phase ratings are at unity power factor.
2
Standby (S), Prime (P) and Continuous ratings (C).
3
Factor for the Single Phase Output from Three Phase Alternator formula listed below.
4
Maximum rated starting kVA that results in a minimum of 90% of rated sustained voltage during starting.

Formulas for calculating full load currents:

Three phase output Single phase output

kW x 1000 kW x SinglePhas eFactor x 1000

Voltage x 1.73 x 0.8 Voltage

Cummins Power Generation

rd
1400 73 Avenue N.E.
Minneapolis, MN 55432 USA
Phone: 763 574 5000
Fax: 763 574 5298

Warning: Back feed to a utility system can cause electrocution and/or property damage. Do not connect to any building’s electrical system
except through an approved device or after building main switch is open.

Our energy working for you.™

www.cumminspower.com
©2010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc.
“Our energy working for you.” is a trademark of Cummins Power Generation. Specifications are subject to change without notice.
D-3335i (7/10)