Scribd
Upload
103 views1 page

Detetermining Boiling Point of Toluene Schematic Diagram

This document outlines the procedure for determining the boiling point of toluene. It involves transferring toluene into a test tube using a dropper, then inserting a sealed capillary tube. The test tube is half submerged in liquid paraffin and heated slowly while recording the temperature when bubbles start and stop in the capillary tube. The average of these two temperatures is calculated as the boiling point, which is then compared to the theoretical value to determine percent error.

Uploaded by

Kish Floran Salas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
103 views1 page

Detetermining Boiling Point of Toluene Schematic Diagram

This document outlines the procedure for determining the boiling point of toluene. It involves transferring toluene into a test tube using a dropper, then inserting a sealed capillary tube. The test tube is half submerged in liquid paraffin and heated slowly while recording the temperature when bubbles start and stop in the capillary tube. The average of these two temperatures is calculated as the boiling point, which is then compared to the theoretical value to determine percent error.

Uploaded by

Kish Floran Salas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Salas Kish Floran DETETERMINING BOILING POINT OF TOLUENE

BSCHEM 2H2
SCHEMATIC DIAGRAM

TOLUENE (C7H8) LIQUID PARAFFN

-TRANSFERRED VIA -SECONDARY MATERIAL


DROPPER AT 2/3 OF TEST USE TO IDENTIFY BOILING
TUBE HEATING
POINT
-POURED AT 100ML
-MAIN SPECIMEN DETERMINING ITS BEAKER -BOILING POINT SETUP
BOILING POINT -THERMOMETER ATTACHED TO THE
TESTUBE USING RUBBER BAND AND
-THE CAPILLARY TUBE IS RELEASING RAPID CLAMPED TO THE IRON STAND
BUBBLES, RECORD THE TEMPERATURE AS T1 -SPECIMEN/ TESTUBE HALF DROWNED
-TURN OFF THE HOT PLATE IF THE BUBBLES INSIDE THE LIQUID PARAFFIN
VANISHED RECORD THE TEMPERATURE AS -SLOWLY HEATED AND STIRRED GENTLY
T2

-CAPILLARY TUBE INSERTED AT TEST CAPILLARY TUBE STARTS


TUBE CONTAINING TOLUENE DETERMINING THE BUBBLING
TEMPERATURE
-CAPILLARY TUBE WAS SEALED THE
OTHER SIDE THORUGH FLAME
-THE TOLUENE IS
-GATHER THE TEMPERATURE T1 AND TT2 AND CALCULATE AT VAPORIZING
THE AVERAGE (118+104)/2 =111C
STAGE
-CALCULATED THE PERCENT ERROR OF THE EXPERIMENT
ANALYSIS FROM THE TOLUENE THEORITICAL BOILING POINT VALUE
PERCENT ERROR = 0.36%

You might also like