Scribd
Upload
40 views1 page

Servo Motor W/ Potentiometer

Uploaded by

Ginsell Mae Tanteo Sarte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
40 views1 page

Servo Motor W/ Potentiometer

Uploaded by

Ginsell Mae Tanteo Sarte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Servo Motor

#include<Servo.h>
Servo servo 1 ;
Int pos = 0;

Void setup(){
Servo 1. Attach (4);
}

Void loop()
{
For (pos = 0; pos,= 180; pos++)
{
Servo 1. Write (pos);
Delay (15);
}
For (pos=180; pos>= 0; pos--)
{
Servo1. Write (pos);
Delay(15);
}
}

Servo motor switches *lcd tilt swtches

#include <Servo.h>Servo myservo; int inPin = 2;int reading; void setup() { myservo.attach(9);
pinMode(inPin, INPUT); Serial.begin(9600); } void loop() { reading = digitalRead(inPin); if
(reading == HIGH){ myservo.write(90); delay (150); } else { myservo.write(0); delay (150); } }

Servo motor w/ potentiometer

#include <Servo.h> Servo myservo; // create servo object to control a servo int potpin = A0; //
analog pin used to connect the potentiometer int val; // variable to read the value from the
analog pin void setup() { myservo.attach(9); // attaches the servo on pin 9 to the servo object }
void loop() { val = analogRead(potpin); // reads the value of the potentiometer (value between
0 and 1023) val = map(val, 0, 1023, 0, 180); // scale it to use it with the servo (value)

You might also like