The 65017 is a high reliability Hall effect sensor with a latching output that operates from -55°C to +150°C. It detects magnetic fields and provides a switched output, using CMOS technology. The sensor is hermetically sealed in a ceramic package and has a chopper stabilized amplifier for improved temperature stability. It will latch its output on or off depending on the direction of the magnetic field detected.
The 65017 is a high reliability Hall effect sensor with a latching output that operates from -55°C to +150°C. It detects magnetic fields and provides a switched output, using CMOS technology. The sensor is hermetically sealed in a ceramic package and has a chopper stabilized amplifier for improved temperature stability. It will latch its output on or off depending on the direction of the magnetic field detected.
The 65017 is a high reliability Hall effect sensor with a latching output that operates from -55°C to +150°C. It detects magnetic fields and provides a switched output, using CMOS technology. The sensor is hermetically sealed in a ceramic package and has a chopper stabilized amplifier for improved temperature stability. It will latch its output on or off depending on the direction of the magnetic field detected.
The 65017 is a high reliability Hall effect sensor with a latching output that operates from -55°C to +150°C. It detects magnetic fields and provides a switched output, using CMOS technology. The sensor is hermetically sealed in a ceramic package and has a chopper stabilized amplifier for improved temperature stability. It will latch its output on or off depending on the direction of the magnetic field detected.
• Wide operating temperature range -55°C to +150°C • Solid state switch
• High magnetic sensitivity • Motor controls • Low current CMOS Technology • Speed sensing • Wide operating voltage range 3.5 to 20 V • Angular Position sensing • Chopper stabilized amplifier minimizes amplifier • Linear Position Sensing offset resulting in improved temperature stability • Current Sensing
DESCRIPTION The 65017 Hall effect sensor detects the presence of a magnetic field and provides a switch output. It is packaged in a hermetically sealed three pin ceramic package and can be used in many harsh environments. An internal chopper stablized amplifier eliminates input offset voltages normally associated with bipolar devices resulting in improved operating point stability. The output transistor will be “latched ON” in the presence of a sufficiently strong South pole magnetic field facing the marked side of the package. The output will be “latched OFF” in the presence of a resetting North pole magnetic field.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage Range ............................................................................................................................................ 3.5 V to 20.0 V Supply Current (Fault) ........................................................................................................................................................ 50 mA. Power Dissipation, @ TA = 25°C (PD)…….…………………………..………………………..………………………………500 mW Magnetic Flux Density……….…………………………………………..……………………………………………………..Unlimited Output ON Current (ISINK)………………………………………………………………………………………………………...…25mA Storage Temperature.......................................................................................................................................... .-65°C to +150°C Operating Free-Air Temperature Range.............................................................................................................. -55°C to +150°C Lead temperature (10 seconds, 1/16” from case).……......................…. ..........................................................................+260°C
