An ISO 9001: 2008 Certified Company

A-129 (o), Road No. 9 (d), V.K.I. Area, Jaipur

Phone : +91 141 4064876, Fax +91 141 2260034
An ISO 9001: 2008 Certified Company
e-mail : [email protected], website : www.sagars.in
 CONVERSION TABLE CONVERSION TABLE
S.W.G. MM INCHES S.W.G. MM INCHES S.W.G. MM INCHES S.W.G. MM INCHES

7/0 12.700 0.500 12.25 2.566 0.10100 25.25 0.493 0.1950 38.25 0.147 0.00580
6/0 11.786 0.464 12.50 2.490 0.09800 25.50 0.482 0.01900 38.50 0.142 0.00560 H.T. Coil Winding Machine
5/0 10.160 0.432 12.75 2.413 0.09500 25.75 0.469 0.01850 38.75 0.137 0.00540
4/0 10.160 0.400 13.00 2.337 0.09200 26.00 0.457 0.01800 39.00 0.132 0.00520
3/0 9.449 0.372 13.25 2.261 0.08900 26.25 0.447 0.01760 39.25 0.129 0.00510
2/0 8.839 0.248 13.50 2.185 0.08600 26.50 0.437 0.01720 39.50 0.126 0.00500 Technical Sheet For H.T. Coil Winding Machine
1/0 8.230 0.324 13.75 2.108 0.08300 26.75 0.427 0.01680 39.75 0.124 0.00490
1.00 7.620 0.30000 14.00 2.032 0.08000 27.00 0.417 0.01640 40.00 0.122 0.00480 Model : SAGAR/DIST/HT
1.25 7.468 0.29400 14.25 1.982 0.07800 27.25 0.407 0.01600 40.25 0.119 0.00470 Max Coil Dia : 350mm
1.50 7.315 0.28800 14.50 1.932 0.07600 27.50 0.397 0.01560 40.50 0.117 0.00460 Max Coil Length : 400mm
1.75 7.163 0.28200 14.75 1.879 0.07400 27.75 0.386 0.01520 40.75 0.114 0.00450 Wire Dia (With Insulation) : 0.05 to 3.5 mm.
2.00 7.010 0.27600 15.00 1.829 0.07200 28.00 0.376 0.01480 41.00 0.112 0.00450 Max Weight Between centers : 150Kgs
2.25 6.859 0.27000 15.25 1.778 0.07000 28.25 0.368 0.01450 41.25 0.109 0.00440
Gear box and Spped : Gear Change Through gear
2.50 6.705 0.26400 15.50 1.727 0.06800 28.50 0.360 0.01420 41.50 0.107 0.00420 Box will be Provided with 3
2.75 6.553 0.25800 15.75 1.676 0.06600 28.75 0.352 0.01390 41.75 0.104 0.00410 Speed Gear Box.
3.00 6.401 0.25200 16.00 1.626 0.06400 29.00 0.345 0.01360 42.00 0.102 0.00400 Winding Speed : 1st 675RPM, 2nd 350RPM,
3.25 6.274 0.24700 16.25 1.575 0.06200 29.25 0.337 0.01330 42.25 0.099 0.00390 3rd 150 RPM
3.50 6.147 0.24200 16.50 1.524 0.06000 29.50 0.329 0.01300 42.50 0.097 0.00380 Face Plate Dia : 300mm
3.75 6.020 0.23700 16.75 1.437 0.05800 29.75 0.322 0.01270 42.75 0.094 0.00370 Rod Length Dia:400 mm
4.00 5.893 0.23200 17.00 1.422 0.05600 30.00 0.315 0.01240 43.00 0.091 0.00360 Length aqnd min. dia is
4.25 5.766 0.22700 17.25 1.371 0.05400 30.25 0.310 0.01220 43.25 0.089 0.00350 25mm.
4.50 5.639 0.22200 17.50 1.320 0.05200 30.50 0.305 0.01200 43.50 0.086 0.00340 Center Height over bench / Table : 250mm
4.75 5.512 0.21700 17.75 1.269 0.05000 30.75 0.300 0.01180 43.75 0.084 0.00330
5.00 5.385 0.21200 18.00 1.219 0.04800 31.00 0.295 0.01160 44.00 0.081 0.00320
5.25 5.258 0.20700 18.25 1.167 0.04600 31.25 0.290 0.01140 44.25 0.079 0.00310 L.T. Coil Winding Machine
5.50 5.131 0.20200 18.50 1.117 0.04400 31.50 0.285 0.01120 44.50 0.076 0.00300
5.75 5.004 0.19700 18.75 1.066 0.04200 31.75 0.279 0.01100 44.75 0.074 0.00290 Technical Sheet For L.T. Coil Winding Machine
6.00 4.887 0.19200 19.00 1.016 0.04000 32.00 0.274 0.01080 45.00 0.071 0.00280
6.25 4.775 0.18800 19.25 0.991 0.03900 32.25 0.269 0.01060 45.25 0.069 0.00270 Max. Coil Dia 300mm
6.50 4.674 0.18400 19.50 0.965 0.03800 32.50 0.264 0.01040 45.50 0.065 0.00260
Max. Coil Length 710mm
6.75 4.572 0.18000 19.75 0.939 0.03700 32.75 0.259 0.01020 45.75 0.063 0.00250
7.00 4.470 0.17600 20.00 0.914 0.03600 33.00 0.254 0.01000 46.00 0.061 0.00240 Max. Weight Carrying
Capacity on face plate 200Kgs.
7.25 4.369 0.17200 20.25 0.889 0.03500 33.25 0.249 0.00980 46.25 0.059 0.00230
With Rod With Tail Stock
7.50 4.267 0.16800 20.50 0.864 0.03400 33.50 0.244 0.00960 46.50 0.056 0.00220
7.75 4.166 0.16400 20.75 0.383 0.03300 33.75 0.239 0.00940 46.75 0.054 0.00210
8.00 4.064 0.16000 21.00 0.813 0.03200 34.00 0.234 .000920 47.00 0.051 0.00200
8.25 3.962 0.15600 21.25 0.788 0.03100 34.25 0.229 0.00900 47.25 0.049 0.00190
8.50 3.861 0.15200 21.50 0.762 0.03000 34.50 0.224 0.00880 47.50 0.046 0.00180
8.75 3.760 0.14800 21.75 0.737 0.02900 34.75 0.218 0.00860 47.75 0.044 0.00170
9.00 3.658 0.14400 22.00 0.711 0.02800 35.00 0.213 0.00840 48.00 0.041 0.00160
9.25 3.556 0.14000 22.25 0.686 0.02700 35.25 0.208 0.00820 48.25 0.038 0.00150
9.50 3.454 0.13600 22.50 0.660 0.02600 35.50 0.203 0.00800 48.50 0.035 0.00140
9.75 3.353 0.13200 22.75 0.635 0.02500 35.75 0.198 0.00780 48.75 0.032 0.00130
10.00 3.251 0.12800 23.00 0.610 0.02400 36.00 0.193 0.00760 49.00 0.030 0.00120
10.25 3.175 0.12500 23.25 0.597 0.02350 36.25 0.188 0.00740 49.25 0.028 0.00115
10.50 3.094 0.12200 23.50 0.584 0.02300 36.50 0.183 0.00720 49.50 1.027 0.00110 MACHINE DETIALS :
10.75 3.023 0.11900 23.75 0.571 0.02250 36.75 0.178 0.00700 49.75 0.026 0.00105 Height of the center over floor 900mm
11.00 2.946 0.11600 24.00 0.559 0.02200 37.00 0.173 0.00680 50.00 0.025 0.00100 Rod Length 980mm and min. dia of rod is 40mm
11.25 2.871 0.11300 24.25 0.546 0.02150 37.25 0.168 0.00660 Dia of the face plate 250mm
11.50 2.794 0.11000 24.50 0.533 0.02100 37.50 0.163 0.00640 Winding Speed 50to100 RPM
11.75 2.781 0.10700 24.75 0.520 0.02050 37.75 0.157 0.00620 Motor reg. 2HP
12.00 2.642 0.10400 25.00 0.508 0.02000 38.00 0.152 0.00600
 L.T. Coil Winding Machine L.T. Covering Machine

L.T Strip Covering Machine

Vertical Paper Covering Machine For Strip

L.T Coil Winding machine Power has capacity 4 Mm to 14 Mm wide strip, 1.5 to 5
Transformers Mm thick strip of aluminium as well as copper.
Description LT - 200 LT - 300 LT - 500 LT - 750
Fitted with reduction gear box and friction
Maximum coil diameter 1000 1400 1500 1500 clutch to drive and run the machine with a coil
Maximum distance 1000 1400 1600 1800 stand and a strip wire straighteners. Paper pad
between Centers
Winding speeds approximate 16, 32, 64, 12, 24, 48, 8, 16, 32, 8, 16, 32,
8" dia x 2" bore and width upto 20 mm.
r.p.m. r.p.m. r.p.m. r.p.m. 2hp/1440 rpm/440v motor is needed to run
Diameter of face plate 450 500 600 600
the machine. The same machine can be used
Height of centers over floor 975 1000 1000 1000
for t.p.c as well as q.p.c by just using a simple
More taper tail stock MT-3 MT-4 MT-4 MT-5
load capacity between centers 400kg. 600kg. 1500kg. 2500kg.
attachment.
Motor 2/1.5/1440 3/2.2/1440 5/3.7/1440 7. 5/5.5/1440
H.P./K.W./R.P.M./A.C.P.H.
Phase Three Three Three Three
L.T. Multi Paper Covering Machine

Double Paper Covering Machine

Double paper Covering Machine

Model Wire Dia Max Speed
SEW/DPC/RGL .71-2.50 mm 8 mtr/min

SEW/DPC/DLX .71-3.00 mm 10 mtr/min

SEW/DPC/LXY .71-4.00 mm 12 mtr/min

SEW/DPC/PWR .61-5.00 mm 7-14 mtr/min

L.T Covering Machine Horizontal
Clients can avail from us an exhaustive range of Horizontal Paper Covering Machine. It is highly advanced,
and offers an amazing production speed of 7 to 14 m/min, which makes it widely used for covering
copper strip or aluminum strips. This range is known for vibration free operation and less maintenance.
Specifications:-
· Efficient gearbox to move the cages in reverse, forward, & neutral direction
· AC Motor with A.C frequency drive & panel
· Straitening roller vertical & horizontal
· Start, stop, inching button, paper brake indicator at both cage & emergency stop at(winder side)
· Auto paper break stops system
· Electronics sensors for paper sensing
· P.I.V. gear box to control paper lapping
· Catter pillar
· For security purpose machine will work when the cage door will close
· Pay off stand for easy loading & unloading
· Take up with roll ring traverse
· Dust proof covering process
 Rod Breakdown Machine Fine Wire Drawing Machine (Belt Drive)

Model No. SEW IWD/13

Model No. SEW RBD/8 SEW REB/9 SEW RBE/10 SEW RBE/11 SEW RBE/12 SEW RBE/13

INLET Alu. /Co. 9.50/8.00mm 9.50/8.00mm 9.50/8.00mm 9.50/8.00mm 9.50/8.00mm 9.50/8.00mm INLET 3.65 / 2.62 / 3.22mm
OOTLET Alu. /Co. 3.00/2.50mm 2.60/2.20mm 2.25/1.90mm 1.95/1.62mm 1.70/1.40mm 1.50/1.25mm
OUTLET 1.62 / 1.00 / 0.80mm

Intermediate wire Drawing Machine Strip Drawing Machine 4 Die

Strip Drawing Machine

Model No. SEW IWD/17
This Machine Can Be used as Both as Rod Break Down and Strip Drawing. With The Die
INLET 3.20/2.62/2.00/1.60mm Forming Process Strip Can Be Drawn at With Very High Speed as 5 to 10 mtr/min
compare to other Units available in market The Quality Of Die Drawn Wire Is Much Better
OUTLET 0.70/0.60/0.45/0.35mm Than Other Strip Flattening Or IR Forming Machines.
Strip Flattening Machine Rigid Stranding Machines

Model Wire Dia Max Rotor Speed (Rpm)

SEW/RS/30 1-4.77 mm 210/190

1 Stand 2 stand or 3 stand Flattening Units SEW/RS/37 1-4.77 mm 230/210/190
for Copper & Aluminium Strip & Profile Manufacturing. SEW/RS/54 1-4.77 mm 210/190/170

SEW/RS/61 1-4.77 mm 230/210/190/170

SEW/RS/91 1-4.77 mm 230/210/190/170/150

Tubular Stranding Machines
Take-Up & Pay Off Unit

Tubular Stranding machine

This strander is for manufacturing high carbon & low carbon steel wire
rope, copper & aluminium conductor Tubular type high speed stranding
with back twist, for 1+6 Bobbin copper / aluminium round & compact
conductors and steel wire stranding.
Main features

Model Wire Dia Max Rotor Speed (Rpm) Model Drum Dia Load Weight (kg)

SEW/TS/7/500 1-5 mm 500 SEW/1250 1250 6000

SEW/TS/7/560 1-5 mm 500 SEW/1600 1600 8000

SEW/TS/7/630 1-5 mm 450 SEW/2000 2000 10000

SEW/TS/12/500 1-5 mm 300 SEW/2600 2600 12000

 Product List

Sagar Engineering Works, Jaipur

Other Products
Sr. Product Product

No.

1. Transformer Mfg. M/c

H.T. Coil Winding Machine

L.T. Coil Winding Machine

Power L.T. Coil Winding Machine

2. Insuated Wire mfg. M/c

Spooler Double Paper Covering Machine
Capacity - 300 / 400 mm
L.T. Paper Covering Machine

Horizontal Paper Covering Machine

Glass/Film Tapping Machines

Wire Pointing Machine 3. Heating Chamber Heating Chamber
For Copper, Aluminium 9.5 x 2.6 mm 4. Strip Forming Machine Strip Forming Machine

Flattening Mills

5. Wire Drawing Machines Rod Breakdown Machine

Fine Wire Drawing Machine

6. Stranding Machines Multi Stranding Machine

Armouring Machine

D.V.D.F Test Set Core layingup machine

Dist./Power Transformer Tubular stranding machine

Basket stranding machine

7. Testing Equipments Double Voltage Double Frequency Test set

High Voltage Test Set

Booster Test Set

No Load No Loss testing Bench

Circle Cutting Machine 8. Ctanes & Hoists Cranes

For Transformers