Scribd Logo
Upload

Welcome to Scribd!

  • 56 views

    Hot Work Permit: Project Name: - Name of Subcontractor/Company

    Uploaded by

    Joey Stanley Guzman
    This hot work permit outlines safety requirements for welding, cutting, grinding, soldering, and other hot work. It requires: - Available fire extinguishers and properly maintained equipment - Removal of flammables within 35 feet and covering of openings - Protection of combustibles on the other side of walls, ceilings, or roofs - Cleaning of enclosed equipment and purging of flammables - A fire watcher during and for 30 minutes after work - Inspection and approval of the equipment and work location before starting work.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Hot Work Permit: Project Name: - Name of Subcontractor/Company

    Uploaded by

    Joey Stanley Guzman
    56 views2 pages
    This hot work permit outlines safety requirements for welding, cutting, grinding, soldering, and other hot work. It requires: - Available fire extinguishers and properly maintained equipment - Removal of flammables within 35 feet and covering of openings - Protection of combustibles on the other side of walls, ceilings, or roofs - Cleaning of enclosed equipment and purging of flammables - A fire watcher during and for 30 minutes after work - Inspection and approval of the equipment and work location before starting work.

    Original Title

    HOT WORK PERMIT

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This hot work permit outlines safety requirements for welding, cutting, grinding, soldering, and other hot work. It requires: - Available fire extinguishers and properly maintained equipment - Removal of flammables within 35 feet and covering of openings - Protection of combustibles on the other side of walls, ceilings, or roofs - Cleaning of enclosed equipment and purging of flammables - A fire watcher during and for 30 minutes after work - Inspection and approval of the equipment and work location before starting work.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    56 views2 pages

    Hot Work Permit: Project Name: - Name of Subcontractor/Company

    Uploaded by

    Joey Stanley Guzman
    This hot work permit outlines safety requirements for welding, cutting, grinding, soldering, and other hot work. It requires: - Available fire extinguishers and properly maintained equipment - Removal of flammables within 35 feet and covering of openings - Protection of combustibles on the other side of walls, ceilings, or roofs - Cleaning of enclosed equipment and purging of flammables - A fire watcher during and for 30 minutes after work - Inspection and approval of the equipment and work location before starting work.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 2

    HOT WORK PERMIT

    HSE-HWP-004
    Project Name : _____________________________ Name of Subcontractor/Company: ______________________
    SCOPE OF WORK: SAFETY EQUIPMENT:

    This Hot Work Permit is required for any temporary operation involving open flames or producing heat and/or
    sparks. This includes but is not limited to: Welding,Cutting,Grinding,Soldering & Torch
    REQUIRED PRECAUTION CHECLIST:
    Available Fire Extinguisher in the area
    Hot work equipement in good repair
    REQUIREMENTS WITHIN 35 FEET (11 METERS OF WORK)
    Flammable liquids,dust,lint and oily deposits removed.
    Explosive atmosphere in are eliminated.
    Floors swept clean.
    Combustible floors wet dow, covered with damp sand or fire resistive sheets.
    All wall and floor opening covered.
    Fire resistive tarpaulins suspended beneath work.
    Protect or shutdown ducts and conveyors that might carry sparks to distant combustibles.
    WORK ON WALLS,CEILING OR ROOF
    Construction is non combustibles and without combustibles covering or insulation.
    Combustible on other side of walls,ceiling or roofs are moved away.
    WORK ON ENCLOSED EQUIPMENT
    Enclosed equipment cleaned of all combustibles .
    Containers purged of flammable liquids/vapors.
    FIRE WATCHER/HOT WORK AREA MONITORING
    Fire watcher will be provided during and for 30 minutes after work. Including coffee or lunch break.
    Fire watcher is supplied with suitable extinguisher, & where practical a charged of small hose.
    Fire watcher is trained in use of equipments and in sounding alarm.
    Fire watcher may be required in adjoining area, above and below.
    Additional Safety Precautions:______________________________________________________________________________
    The Equipment and/or location where the work is to be done has been inspected and the work is safe to do? YES NO
    YES NO
    JOB HAZARD ANALYSIS
    STEPS TO COMPLETE THE JOB POTENTIAL HAZARD HAZARD CONTROL

    NAME OF PERSON DOING HOT WORK: WELDING/CUTTING MATERIALS AND ACCESSORIES


    1 1
    2 2
    3 3
    4 4
    5 5
    CONTROL PERMIT NO: _________________________LEVEL/AREA OF WORK: ____________________ REQUESTED DATE AND TIME: _______ /________
    REQUESTED BY: APPROVE/NOTED BY: CHECKED BY: (To be checked at the workplace)

    Project In Charge: __________________ _______________________________ __________________________________

    Permit Receiver: ___________________ TECI - Permit Issuer TECI - HSE Dept.


    PERMIT CLOSE OUT
    PERMIT CLOSE OUT - SUBCONTRACTOR ( PERMIT RECEIVER )
    The subcontractor acknowledge that the activity has been completed/suspended and the area has been left in a safe and satisfactory condition
    Name: Signature: ______________________________ Time: _______________ Date: ________________
    _________________________________________
    PERMIT CLOSE OUT - TECI ( PERMIT ISSUER )
    The permit issuer acknowledge that the activity has been completed/suspended
    Name: Signature: ______________________________ Time: _______________ Date: ________________
    _________________________________________

    You might also like