IEEE 802.3af Power Over Ethernet Injector: Key Features
IEEE 802.3af Power Over Ethernet Injector: Key Features
IEEE 802.3af Power Over Ethernet Injector: Key Features
Key Features
• Complies with IEEE 802.3af Power over Ethernet, IEEE
802.3/802.3u 10/100Base-TX
PLANET POE-151 is an IEEE 802.3af Power over Ethernet Injector that provides DC 48V over • Works with EIA568, category 5,4-pair cables for
Ethernet cables. The POE-151 IEEE 802.3af Power over Ethernet Injector inserts DC voltage 10Base-T or 100Base-TX
into Cat.5 cable, allowing the cable between the Injector (POE-151) and Splitter (POE-151S- • EMI standards complies with FCC, CE class B
5V/9V/12V) to transfer data and power simultaneously. The maximum distance between the
Injector (POE-151) and Splitter (POE-151S-5V/9V/12V) is 100 meters. With POE-151 being
installed, it combines the Ethernet digital data with power over the twisted pair cables as
an IEEE 802.3af Power over Ethernet Injector. And the IEEE 802.3af Power over Ethernet
splitter will split the digital data and the power into two outputs.
Power
Left Side
48V DC IN
POE-151
PoE Injector
With IEEE 802.3af Power over Ethernet devices being installed, the system administrator
only has to use a single RJ-45 Ethernet cable to carry both power and data to each device.
Besides, when used with the POE-151S-5V/9V/12V, the POE-151 can offer the benefits
Right Side
of cost saving, easy networking planning and higher reliability. What’s more, upon any
IEEE 802.3af devices being installed, the POE-151 or together with POE-151S-5V/9V/12V
can make the connection while migrating or splitting the power and the Ethernet digital
phone.
Data Sheet
1 1
POE-151
Applications
Connecting to IEEE 802.3af devices
Due to the capability of IEEE 802.3af standard, the POE-151 can directly connect with any IEEE 802.3af end-nodes like wireless access point, IP phones
and Internet camera which support IEEE 802.3af In-line Power over Ethernet port.
100 meters
Switch
Power
POE-151 PoE IP Camera
100 meters
Switch
Data Data Power Data
PoE
DC DC
Specifications
Model POE-151
Hardware version version 2
Ethernet Connector 2 x RJ-45( 1 for data + DC out, 1 for data in)
Ethernet Data rate 10/100Mbps( vary on Ethernet device attached)
Input voltage DC 48V, 0.4A
Number of devices can be powered 1
Ethernet cable TIA/EIA-568, Category 5/5e cable
LED indicator 1 x power, 1 x POE ready / in-use
Dimensions (W x D x H) 73 x 55 x 24 mm
EMI FCC Class B, CE mark
IEEE 802.3 Ethernet,
Standard Compliance IEEE 802.3u Fast Ethernet,
IEEE 802.3af Power over Ethernet.
2
POE-151
Product Outlook
PoE-IEEE 802.3af
48V DC
Power in-use
Ready
PWR
PoE
Ethernet
Ordering Information
POE-151 IEEE 802.3af Power Over Ethernet Injector
Related Products
POE-151S IEEE 802.3af Power Over Ethernet Splitter
POE-E101 IEEE 802.3af Power over Ethernet Extender