0% found this document useful (0 votes)
100 views6 pages

Log PasswordRecoveryFailed

Download as txt, pdf, or txt
Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1/ 6

System Bootstrap, Version 12.

2(50r)SYS3, RELEASE SOFTWARE (fc1)


Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.
PYRAMID platform with 2097152 Kbytes of main memory

Autoboot executing command: "boot bootdisk:s2t54-adventerprisek9-mz.SPA.152-


1.SY6.bin"

bootdisk:%s72044-atafslib-m: Digitally Signed Release Software with key version A

Initializing ATA monitor library...

monitor: command "boot" aborted due to user interrupt

rommon 1 > confreg 0x2142

You must reset or power cycle for new config to take effect
rommon 2 > reset

Resetting .......

System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)


Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.
PYRAMID platform with 2097152 Kbytes of main memory

Autoboot executing command: "boot bootdisk:s2t54-adventerprisek9-mz.SPA.152-


1.SY6.bin"

bootdisk:%s72044-atafslib-m: Digitally Signed Release Software with key version A

Initializing ATA monitor library...

bootdisk:s2t54-adventerprisek9-mz.SPA.152-1.SY6.bin: Digitally Signed Release


Software with key version A

Self extracting the image... [OK]


Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
###################################################################################
###################################################################################
###################################################################################
###################################################################################
###################################################################################
############ [OK]
*** No sreloc section
Restricted Rights Legend

Use, duplication, or disclosure by the Government is


subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.


170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, s2t54 Software (s2t54-ADVENTERPRISEK9-M), Version 15.2(1)SY6,


RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Fri 09-Feb-18 11:27 by prod_rel_team
This is a VSS capable switch.
VSL ports can be configured in slot: 4

*Jul 30 09:26:38.655: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console


debugging output.

*Jul 30 09:26:27.943: %VS_PARSE-4-CONFIG_WARNING: Switch bootup in Standalone mode


since config register sets to skip Startup config: 0x2142

Firmware compiled 09-Feb-18 11:27 by binugopa Build [26112]

*Jul 30 09:26:38.655: %PFREDUN-6-STANDBY: Initializing as STANDBY processor for


this switch
*Jul 30 09:26:39.119: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.

*Jul 30 09:26:41.459: STBY: Bring up standby supervisor as a DFC


*Jul 30 09:26:49.151: %PFREDUN-STBY-6-STANDBY: Initializing for SSO mode in Default
Domain

This product contains cryptographic features and is subject to United


States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to


[email protected].

cisco C6807-XL (M8572) processor (revision ) with 1785856K/262144K bytes of memory.


Processor board ID SMC1849005D
CPU: MPC8572_E, Version: 2.2, (0x80E80022)
CORE: E500, Version: 3.0, (0x80210030)
CPU:1500MHz, CCB:600MHz, DDR:600MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled

Last reset from s/w reset


1 Virtual Ethernet interface
54 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
2543K bytes of non-volatile configuration memory.

*May 30 19:46:32.283: STBY: SP: Currently running ROMMON from S (Gold) region
*May 30 19:47:13.535: %PFREDUN-STBY-6-STANDBY: Failure of ACTIVE detected, STANDBY
not ready and reset
*May 30 19:47:13.995: %SYS-STBY-3-LOGGER_FLUSHING: System pausing to ensure console
debugging output.

*May 30 19:47:13.995: %PFREDUN-STBY-6-STANDBY: Active not responding, will be


takendown in 120 sec
*May 30 19:47:14.751: %SYS-STBY-3-LOGGER_FLUSHING: System pausing to ensure console
debugging output.

*May 30 19:47:14.231: %SYS-STBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to


ensure console debugging output.

*May 30 19:47:14.747: %SYS-STBY-5-SWITCHOVER: Switchover requested by Reset


Process. Reason: Reason unspecified.
*May 30 19:47:14.751: STBY: Bringing down the ports as Supervisor is going down

*May 30 19:47:14.751: STBY: oir_send_scp_msg_to_disable_supervisor_ports:


scpEnableDisablePorts failed for slot=4

*May 30 19:47:15.371: %SYS-STBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to


ensure console debugging output.

Resetting .......

System Bootstrap, Version 12.2(50r)SYS3, RELEASE SOFTWARE (fc1)


Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.
PYRAMID platform with 2097152 Kbytes of main memory

Autoboot executing command: "boot bootdisk:s2t54-adventerprisek9-mz.SPA.152-


1.SY6.bin"

bootdisk:%s72044-atafslib-m: Digitally Signed Release Software with key version A

Initializing ATA monitor library...

bootdisk:s2t54-adventerprisek9-mz.SPA.152-1.SY6.bin: Digitally Signed Release


Software with key version A

Self extracting the image... [OK]


Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
###################################################################################
###################################################################################
###################################################################################
###################################################################################
###################################################################################
############ [OK]
*** No sreloc section
Restricted Rights Legend

Use, duplication, or disclosure by the Government is


subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.


170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, s2t54 Software (s2t54-ADVENTERPRISEK9-M), Version 15.2(1)SY6,


RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Fri 09-Feb-18 11:27 by prod_rel_team
This is a VSS capable switch.
VSL ports can be configured in slot: 4

*Jul 30 09:29:56.663: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console


debugging output.

Firmware compiled 09-Feb-18 11:27 by binugopa Build [26112]

*Jul 30 09:29:56.663: %PFREDUN-6-STANDBY: Initializing as STANDBY processor for


this switch
*Jul 30 09:29:56.963: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.

*Jul 30 09:30:23.535: STBY: Bring up standby supervisor as a DFC


*Jul 30 09:30:29.607: %PFREDUN-STBY-6-STANDBY: Initializing for SSO mode in Default
Domain

This product contains cryptographic features and is subject to United


States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].

cisco C6807-XL (M8572) processor (revision ) with 1785856K/262144K bytes of memory.


Processor board ID SMC1849005D
CPU: MPC8572_E, Version: 2.2, (0x80E80022)
CORE: E500, Version: 3.0, (0x80210030)
CPU:1500MHz, CCB:600MHz, DDR:600MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled

Last reset from s/w reset


1 Virtual Ethernet interface
54 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
2543K bytes of non-volatile configuration memory.

Press RETURN to get started!

*May 30 19:50:23.111: STBY: SP: Currently running ROMMON from S (Gold) region
*May 30 19:50:45.691: %DIAG-STBY-6-RUN_MINIMUM: Module 4: Running Minimal
Diagnostics...
*May 30 19:51:17.091: %DIAG-STBY-6-DIAG_OK: Module 4: Passed Online Diagnostics
*May 30 19:51:36.607: %SSH-STBY-5-DISABLED: SSH 1.99 has been disabled
*May 30 19:51:51.979: %SYS-STBY-5-RESTART: System restarted --
Cisco IOS Software, s2t54 Software (s2t54-ADVENTERPRISEK9-M), Version 15.2(1)SY6,
RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Fri 09-Feb-18 11:27 by prod_rel_team
*May 30 19:51:52.063: %SSH-STBY-5-ENABLED: SSH 1.99 has been enabled
*May 30 19:51:52.091: %SYS-STBY-6-BOOTTIME: Time taken to reboot after reload =
277 seconds
*May 30 19:51:53.751: %SYS-STBY-3-LOGGER_FLUSHED: System was paused for 00:02:18 to
ensure console debugging output.

User Access Verification

Username:
*May 30 19:52:04.319: %SSH-STBY-5-DISABLED: SSH 1.99 has been disabled
*May 30 19:52:04.319: %SSH-STBY-5-ENABLED: SSH 1.99 has been enabled
*May 30 19:52:06.671: %PFREDUN-STBY-6-STANDBY: Ready for SSO mode in Default Domain
% Username: timeout expired!
craddle_fr_m02 con0 is now available

Press RETURN to get started.

You might also like