web3.

js Documentation
Release 1.0.0

Fabian Vogelsteller, Marek Kotewicz, Jeffrey Wilcke, Marian Oance

Oct 23, 2019

 User Documentation

1 Getting Started 3
1.1 Adding web3.js . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Callbacks Promises Events 5

3 Glossary 7
3.1 json interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4 Web3 9
4.1 Web3.modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2 web3 object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.3 version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.4 utils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.5 setProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.6 providers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.7 givenProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.8 currentProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.9 BatchRequest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.10 extend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5 web3.eth 17
5.1 Note on checksum addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.2 subscribe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.3 Contract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.4 Iban . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.5 personal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.6 accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.7 ens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.8 abi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.9 net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.10 setProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.11 providers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.12 givenProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.13 currentProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.14 BatchRequest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.15 extend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.16 defaultAccount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

i
 5.17 defaultBlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5.18 defaultHardfork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.19 defaultChain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.20 defaultCommon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5.21 transactionBlockTimeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.22 transactionConfirmationBlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.23 transactionPollingTimeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.24 getProtocolVersion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.25 isSyncing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.26 getCoinbase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.27 isMining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
5.28 getHashrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
5.29 getGasPrice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.30 getAccounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.31 getBlockNumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5.32 getBalance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5.33 getStorageAt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.34 getCode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.35 getBlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
5.36 getBlockTransactionCount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
5.37 getUncle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.38 getTransaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.39 getTransactionFromBlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5.40 getTransactionReceipt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5.41 getTransactionCount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
5.42 sendTransaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5.43 sendSignedTransaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5.44 sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.45 signTransaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5.46 call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.47 estimateGas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5.48 getPastLogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5.49 getWork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5.50 submitWork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
5.51 getChainId . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
5.52 getNodeInfo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

6 web3.eth.subscribe 49
6.1 subscribe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6.2 clearSubscriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.3 subscribe(“pendingTransactions”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.4 subscribe(“newBlockHeaders”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
6.5 subscribe(“syncing”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6.6 subscribe(“logs”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

7 web3.eth.Contract 57
7.1 new contract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
7.2 = Properties = . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
7.3 defaultAccount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
7.4 defaultBlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
7.5 defaultHardfork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
7.6 defaultChain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
7.7 defaultCommon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
7.8 transactionBlockTimeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

ii
 7.9 transactionConfirmationBlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
7.10 transactionPollingTimeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
7.11 options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
7.12 options.address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
7.13 options.jsonInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
7.14 = Methods = . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
7.15 clone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
7.16 deploy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
7.17 methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
7.18 methods.myMethod.call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
7.19 methods.myMethod.send . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
7.20 methods.myMethod.estimateGas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
7.21 methods.myMethod.encodeABI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
7.22 = Events = . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
7.23 once . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
7.24 events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
7.25 events.allEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
7.26 getPastEvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

8 web3.eth.accounts 79
8.1 create . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
8.2 privateKeyToAccount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
8.3 signTransaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
8.4 recoverTransaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
8.5 hashMessage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
8.6 sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
8.7 recover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
8.8 encrypt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
8.9 decrypt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
8.10 wallet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
8.11 wallet.create . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
8.12 wallet.add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
8.13 wallet.remove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
8.14 wallet.clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
8.15 wallet.encrypt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
8.16 wallet.decrypt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
8.17 wallet.save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
8.18 wallet.load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

9 web3.eth.personal 95
9.1 setProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
9.2 providers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
9.3 givenProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
9.4 currentProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
9.5 BatchRequest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
9.6 extend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
9.7 newAccount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
9.8 sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
9.9 ecRecover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
9.10 signTransaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
9.11 sendTransaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
9.12 unlockAccount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
9.13 lockAccount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
9.14 getAccounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

iii
 9.15 importRawKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

10 web3.eth.ens 107
10.1 registry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
10.2 resolver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
10.3 getAddress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
10.4 setAddress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
10.5 getPubkey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
10.6 setPubkey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
10.7 getContent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
10.8 setContent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
10.9 getMultihash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
10.10 setMultihash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
10.11 ENS events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

11 web3.eth.Iban 119
11.1 Iban instance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
11.2 Iban contructor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
11.3 toAddress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
11.4 toIban . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
11.5 fromAddress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
11.6 fromBban . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
11.7 createIndirect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
11.8 isValid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
11.9 prototype.isValid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
11.10 prototype.isDirect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
11.11 prototype.isIndirect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
11.12 prototype.checksum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
11.13 prototype.institution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
11.14 prototype.client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
11.15 prototype.toAddress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
11.16 prototype.toString . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

12 web3.eth.abi 129
12.1 encodeFunctionSignature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
12.2 encodeEventSignature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
12.3 encodeParameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
12.4 encodeParameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
12.5 encodeFunctionCall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
12.6 decodeParameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
12.7 decodeParameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
12.8 decodeLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

13 web3.*.net 139
13.1 getId . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
13.2 isListening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
13.3 getPeerCount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

14 web3.bzz 143
14.1 setProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
14.2 givenProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
14.3 currentProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
14.4 upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
14.5 download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
14.6 pick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

iv
15 web3.shh 149
15.1 setProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
15.2 providers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
15.3 givenProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
15.4 currentProvider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
15.5 BatchRequest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
15.6 extend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
15.7 getId . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
15.8 isListening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
15.9 getPeerCount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
15.10 getVersion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
15.11 getInfo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
15.12 setMaxMessageSize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
15.13 setMinPoW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
15.14 markTrustedPeer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
15.15 newKeyPair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
15.16 addPrivateKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
15.17 deleteKeyPair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
15.18 hasKeyPair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
15.19 getPublicKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
15.20 getPrivateKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
15.21 newSymKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
15.22 addSymKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
15.23 generateSymKeyFromPassword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
15.24 hasSymKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
15.25 getSymKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
15.26 deleteSymKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
15.27 post . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
15.28 subscribe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
15.29 clearSubscriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
15.30 newMessageFilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
15.31 deleteMessageFilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
15.32 getFilterMessages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

16 web3.utils 171
16.1 Bloom Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
16.2 randomHex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
16.3 _ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
16.4 BN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
16.5 isBN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
16.6 isBigNumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
16.7 sha3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
16.8 soliditySha3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
16.9 isHex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
16.10 isHexStrict . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
16.11 isAddress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
16.12 toChecksumAddress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
16.13 checkAddressChecksum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
16.14 toHex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
16.15 toBN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
16.16 hexToNumberString . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
16.17 hexToNumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
16.18 numberToHex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
16.19 hexToUtf8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

v
 16.20 hexToAscii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
16.21 utf8ToHex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
16.22 asciiToHex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
16.23 hexToBytes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
16.24 bytesToHex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
16.25 toWei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
16.26 fromWei . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
16.27 unitMap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
16.28 padLeft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
16.29 padRight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
16.30 toTwosComplement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

Index 193

vi
 web3.js Documentation, Release 1.0.0

web3.js is a collection of libraries which allow you to interact with a local or remote ethereum node, using a HTTP or
IPC connection.
The following documentation will guide you through installing and running web3.js, as well as providing a API
reference documentation with examples.
Contents:
Keyword Index, Search Page

User Documentation 1
web3.js Documentation, Release 1.0.0

2 User Documentation
 CHAPTER 1

Getting Started

The web3.js library is a collection of modules which contain specific functionality for the ethereum ecosystem.
• The web3-eth is for the ethereum blockchain and smart contracts
• The web3-shh is for the whisper protocol to communicate p2p and broadcast
• The web3-bzz is for the swarm protocol, the decentralized file storage
• The web3-utils contains useful helper functions for Dapp developers.

1.1 Adding web3.js

First you need to get web3.js into your project. This can be done using the following methods:
• npm: npm install web3
• meteor: meteor add ethereum:web3
• pure js: link the dist/web3.min.js
After that you need to create a web3 instance and set a provider. Ethereum supported Browsers like Mist or Meta-
Mask will have a ethereumProvider or web3.currentProvider available. For web3.js, check Web3.
givenProvider. If this property is null you should connect to a remote/local node.

// in node.js use: var Web3 = require('web3');

var web3 = new Web3(Web3.givenProvider || "ws://localhost:8545");

That’s it! now you can use the web3 object.

3
web3.js Documentation, Release 1.0.0

4 Chapter 1. Getting Started

 CHAPTER 2

Callbacks Promises Events

To help web3 integrate into all kind of projects with different standards we provide multiple ways to act on asyn-
chronous functions.
Most web3.js objects allow a callback as the last parameter, as well as returning promises to chain functions.
Ethereum as a blockchain has different levels of finality and therefore needs to return multiple “stages” of an action.
To cope with requirement we return a “promiEvent” for functions like web3.eth.sendTransaction or contract
methods. This “promiEvent” is a promise combined with an event emitter to allow acting on different stages of action
on the blockchain, like a transaction.
PromiEvents work like a normal promises with added on, once and off functions. This way developers can watch
for additional events like on “receipt” or “transactionHash”.

web3.eth.sendTransaction({from: '0x123...', data: '0x432...'})

.once('transactionHash', function(hash){ ... })
.once('receipt', function(receipt){ ... })
.on('confirmation', function(confNumber, receipt){ ... })
.on('error', function(error){ ... })
.then(function(receipt){
// will be fired once the receipt is mined
});

5
web3.js Documentation, Release 1.0.0

6 Chapter 2. Callbacks Promises Events

 CHAPTER 3

Glossary

3.1 json interface

The json interface is a json object describing the Application Binary Interface (ABI) for an Ethereum smart contract.
Using this json interface web3.js is able to create JavaScript object representing the smart contract and its methods and
events using the web3.eth.Contract object.

3.1.1 Specification

Functions:
• type: "function", "constructor" (can be omitted, defaulting to "function"; "fallback" also
possible but not relevant in web3.js);
• name: the name of the function (only present for function types);
• constant: true if function is specified to not modify the blockchain state;
• payable: true if function accepts ether, defaults to false;
• stateMutability: a string with one of the following values: pure (specified to not read blockchain state),
view (same as constant above), nonpayable and payable (same as payable above);
• inputs: an array of objects, each of which contains:
– name: the name of the parameter;
– type: the canonical type of the parameter.
• outputs: an array of objects same as inputs, can be omitted if no outputs exist.
Events:
• type: always "event"

7
web3.js Documentation, Release 1.0.0

• name: the name of the event;

• inputs: an array of objects, each of which contains:
– name: the name of the parameter;
– type: the canonical type of the parameter.
– indexed: true if the field is part of the log’s topics, false if it one of the log’s data segment.
• anonymous: true if the event was declared as anonymous.

3.1.2 Example

contract Test {
uint a;
address d = 0x12345678901234567890123456789012;

function Test(uint testInt) { a = testInt;}

event Event(uint indexed b, bytes32 c);

event Event2(uint indexed b, bytes32 c);

function foo(uint b, bytes32 c) returns(address) {

Event(b, c);
return d;
}
}

// would result in the JSON:

[{
"type":"constructor",
"payable":false,
"stateMutability":"nonpayable"
"inputs":[{"name":"testInt","type":"uint256"}],
},{
"type":"function",
"name":"foo",
"constant":false,
"payable":false,
"stateMutability":"nonpayable",
"inputs":[{"name":"b","type":"uint256"}, {"name":"c","type":"bytes32"}],
"outputs":[{"name":"","type":"address"}]
},{
"type":"event",
"name":"Event",
"inputs":[{"indexed":true,"name":"b","type":"uint256"}, {"indexed":false,"name":"c
˓→","type":"bytes32"}],

"anonymous":false
},{
"type":"event",
"name":"Event2",
"inputs":[{"indexed":true,"name":"b","type":"uint256"},{"indexed":false,"name":"c
˓→","type":"bytes32"}],

"anonymous":false
}]

8 Chapter 3. Glossary
 CHAPTER 4

Web3

Class
This’s main class of anything related Ethereum.

var Web3 = require('web3');

> Web3.utils
> Web3.version
> Web3.givenProvider
> Web3.providers
> Web3.modules

4.1 Web3.modules

Property of Web3 class

Web3.modules

Will return an object with the classes of all major sub modules, to be able to instantiate them manually.

4.1.1 Returns

Object: A list of modules:

• Eth - Function: the Eth module for interacting with the Ethereum network see web3.eth for more.
• Net - Function: the Net module for interacting with network properties see web3.eth.net for more.
• Personal - Function: the Personal module for interacting with the Ethereum accounts see
web3.eth.personal for more.

9
web3.js Documentation, Release 1.0.0

• Shh - Function: the Shh module for interacting with the whisper protocol see web3.shh for more.
• Bzz - Function: the Bzz module for interacting with the swarm network see web3.bzz for more.

4.1.2 Example

Web3.modules
> {
Eth: Eth function(provider),
Net: Net function(provider),
Personal: Personal function(provider),
Shh: Shh function(provider),
Bzz: Bzz function(provider),
}

4.2 web3 object

The instance of Web3

The web3.js object is an umbrella package to house all Ethereum related modules.

var Web3 = require('web3');

// "Web3.providers.givenProvider" will be set if in an Ethereum supported browser.

var web3 = new Web3(Web3.givenProvider || 'ws://some.local-or-remote.node:8546');

> web3.eth
> web3.shh
> web3.bzz
> web3.utils
> web3.version

4.3 version

Property of Web3 class and instance of Web3

Web3.version
web3.version

Contains the version of the web3 container object.

4.3.1 Returns

String: The current version.

10 Chapter 4. Web3
 web3.js Documentation, Release 1.0.0

4.3.2 Example

web3.version;
> "1.0.0"

4.4 utils

Property of Web3 class and instance of Web3

Web3.utils
web3.utils

Utility functions are also exposes on the Web3 class object directly.
See web3.utils for more.

4.5 setProvider

web3.setProvider(myProvider)
web3.eth.setProvider(myProvider)
web3.shh.setProvider(myProvider)
web3.bzz.setProvider(myProvider)
...

Will change the provider for its module.

Note: When called on the umbrella package web3 it will also set the provider for all sub modules web3.eth,
web3.shh, etc EXCEPT web3.bzz which needs a separate provider at all times.

4.5.1 Parameters

1. Object - myProvider: a valid provider.

4.5.2 Returns

Boolean

4.5.3 Example

4.4. utils 11
web3.js Documentation, Release 1.0.0

var Web3 = require('web3');

var web3 = new Web3('http://localhost:8545');
// or
var web3 = new Web3(new Web3.providers.HttpProvider('http://localhost:8545'));

// change provider
web3.setProvider('ws://localhost:8546');
// or
web3.setProvider(new Web3.providers.WebsocketProvider('ws://localhost:8546'));

// Using the IPC provider in node.js

var net = require('net');
var web3 = new Web3('/Users/myuser/Library/Ethereum/geth.ipc', net); // mac os path
// or
var web3 = new Web3(new Web3.providers.IpcProvider('/Users/myuser/Library/Ethereum/
˓→geth.ipc', net)); // mac os path

// on windows the path is: "\\\\.\\pipe\\geth.ipc"

// on linux the path is: "/users/myuser/.ethereum/geth.ipc"

4.6 providers

web3.providers
web3.eth.providers
web3.shh.providers
web3.bzz.providers
...

Contains the current available providers.

4.6.1 Value

Object with the following providers:

• Object - HttpProvider: The HTTP provider is deprecated, as it won’t work for subscriptions.
• Object - WebsocketProvider: The Websocket provider is the standard for usage in legacy browsers.
• Object - IpcProvider: The IPC provider is used node.js dapps when running a local node. Gives the most
secure connection.

4.6.2 Example

var Web3 = require('web3');

// use the given Provider, e.g in Mist, or instantiate a new websocket provider
var web3 = new Web3(Web3.givenProvider || 'ws://remotenode.com:8546');
// or
var web3 = new Web3(Web3.givenProvider || new Web3.providers.WebsocketProvider('ws://
˓→remotenode.com:8546'));

// Using the IPC provider in node.js

var net = require('net');
(continues on next page)

12 Chapter 4. Web3
 web3.js Documentation, Release 1.0.0

(continued from previous page)

var web3 = new Web3('/Users/myuser/Library/Ethereum/geth.ipc', net); // mac os path

// or
var web3 = new Web3(new Web3.providers.IpcProvider('/Users/myuser/Library/Ethereum/
˓→geth.ipc', net)); // mac os path

// on windows the path is: "\\\\.\\pipe\\geth.ipc"

// on linux the path is: "/users/myuser/.ethereum/geth.ipc"

4.7 givenProvider

web3.givenProvider
web3.eth.givenProvider
web3.shh.givenProvider
web3.bzz.givenProvider
...

When using web3.js in an Ethereum compatible browser, it will set with the current native provider by that browser.
Will return the given provider by the (browser) environment, otherwise null.

4.7.1 Returns

Object: The given provider set or null;

4.7.2 Example

4.8 currentProvider

web3.currentProvider
web3.eth.currentProvider
web3.shh.currentProvider
web3.bzz.currentProvider
...

Will return the current provider, otherwise null.

4.8.1 Returns

Object: The current provider set or null;

4.7. givenProvider 13
web3.js Documentation, Release 1.0.0

4.8.2 Example

4.9 BatchRequest

new web3.BatchRequest()
new web3.eth.BatchRequest()
new web3.shh.BatchRequest()
new web3.bzz.BatchRequest()

Class to create and execute batch requests.

4.9.1 Parameters

none

4.9.2 Returns

Object: With the following methods:

• add(request): To add a request object to the batch call.
• execute(): Will execute the batch request.

4.9.3 Example

var contract = new web3.eth.Contract(abi, address);

var batch = new web3.BatchRequest();

batch.add(web3.eth.getBalance.request('0x0000000000000000000000000000000000000000',
˓→'latest', callback));

batch.add(contract.methods.balance(address).call.request({from:
˓→'0x0000000000000000000000000000000000000000'}, callback2));

batch.execute();

4.10 extend

web3.extend(methods)
web3.eth.extend(methods)
web3.shh.extend(methods)
web3.bzz.extend(methods)
...

Allows extending the web3 modules.

Note: You also have *.extend.formatters as additional formatter functions to be used for in and output
formatting. Please see the source file for function details.

14 Chapter 4. Web3
 web3.js Documentation, Release 1.0.0

4.10.1 Parameters

1. methods - Object: Extension object with array of methods description objects as follows:
• property - String: (optional) The name of the property to add to the module. If no property is
set it will be added to the module directly.
• methods - Array: The array of method descriptions:
– name - String: Name of the method to add.
– call - String: The RPC method name.
– params - Number: (optional) The number of parameters for that function. Default 0.
– inputFormatter - Array: (optional) Array of inputformatter functions. Each array item
responds to a function parameter, so if you want some parameters not to be formatted, add a
null instead.
– outputFormatter - ``Function: (optional) Can be used to format the output of the
method.

4.10.2 Returns

Object: The extended module.

4.10.3 Example

web3.extend({
property: 'myModule',
methods: [{
name: 'getBalance',
call: 'eth_getBalance',
params: 2,
inputFormatter: [web3.extend.formatters.inputAddressFormatter, web3.extend.
˓→formatters.inputDefaultBlockNumberFormatter],

outputFormatter: web3.utils.hexToNumberString
},{
name: 'getGasPriceSuperFunction',
call: 'eth_gasPriceSuper',
params: 2,
inputFormatter: [null, web3.utils.numberToHex]
}]
});

web3.extend({
methods: [{
name: 'directCall',
call: 'eth_callForFun',
}]
});

console.log(web3);
> Web3 {
myModule: {
getBalance: function(){},
getGasPriceSuperFunction: function(){}
(continues on next page)

4.10. extend 15
web3.js Documentation, Release 1.0.0

(continued from previous page)

},
directCall: function(){},
eth: Eth {...},
bzz: Bzz {...},
...
}

16 Chapter 4. Web3
 CHAPTER 5

web3.eth

The web3-eth package allows you to interact with an Ethereum blockchain and Ethereum smart contracts.

var Eth = require('web3-eth');

// "Eth.providers.givenProvider" will be set if in an Ethereum supported browser.

var eth = new Eth(Eth.givenProvider || 'ws://some.local-or-remote.node:8546');

// or using the web3 umbrella package

var Web3 = require('web3');

var web3 = new Web3(Web3.givenProvider || 'ws://some.local-or-remote.node:8546');

// -> web3.eth

5.1 Note on checksum addresses

All Ethereum addresses returned by functions of this package are returned as checksum addresses. This means some
letters are uppercase and some are lowercase. Based on that it will calculate a checksum for the address and prove its
correctness. Incorrect checksum addresses will throw an error when passed into functions. If you want to circumvent
the checksum check you can make an address all lower- or uppercase.

5.1.1 Example

web3.eth.getAccounts(console.log);
> ["0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe" ,
˓→"0x85F43D8a49eeB85d32Cf465507DD71d507100C1d"]

17
web3.js Documentation, Release 1.0.0

5.2 subscribe

For web3.eth.subscribe see the Subscribe reference documentation

5.3 Contract

For web3.eth.Contract see the Contract reference documentation

5.4 Iban

For web3.eth.Iban see the Iban reference documentation

5.5 personal

For web3.eth.personal see the personal reference documentation

5.6 accounts

For web3.eth.accounts see the accounts reference documentation

5.7 ens

For web3.eth.ens see the ENS reference documentation

5.8 abi

For web3.eth.abi see the ABI reference documentation

18 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.9 net

For web3.eth.net see the net reference documentation

5.10 setProvider

web3.setProvider(myProvider)
web3.eth.setProvider(myProvider)
web3.shh.setProvider(myProvider)
web3.bzz.setProvider(myProvider)
...

Will change the provider for its module.

Note: When called on the umbrella package web3 it will also set the provider for all sub modules web3.eth,
web3.shh, etc EXCEPT web3.bzz which needs a separate provider at all times.

5.10.1 Parameters

1. Object - myProvider: a valid provider.

5.10.2 Returns

Boolean

5.10.3 Example

var Web3 = require('web3');

var web3 = new Web3('http://localhost:8545');
// or
var web3 = new Web3(new Web3.providers.HttpProvider('http://localhost:8545'));

// change provider
web3.setProvider('ws://localhost:8546');
// or
web3.setProvider(new Web3.providers.WebsocketProvider('ws://localhost:8546'));

// Using the IPC provider in node.js

var net = require('net');
var web3 = new Web3('/Users/myuser/Library/Ethereum/geth.ipc', net); // mac os path
// or
var web3 = new Web3(new Web3.providers.IpcProvider('/Users/myuser/Library/Ethereum/
˓→geth.ipc', net)); // mac os path

// on windows the path is: "\\\\.\\pipe\\geth.ipc"

// on linux the path is: "/users/myuser/.ethereum/geth.ipc"

5.9. net 19
web3.js Documentation, Release 1.0.0

5.11 providers

web3.providers
web3.eth.providers
web3.shh.providers
web3.bzz.providers
...

Contains the current available providers.

5.11.1 Value

Object with the following providers:

• Object - HttpProvider: The HTTP provider is deprecated, as it won’t work for subscriptions.
• Object - WebsocketProvider: The Websocket provider is the standard for usage in legacy browsers.
• Object - IpcProvider: The IPC provider is used node.js dapps when running a local node. Gives the most
secure connection.

5.11.2 Example

var Web3 = require('web3');

// use the given Provider, e.g in Mist, or instantiate a new websocket provider
var web3 = new Web3(Web3.givenProvider || 'ws://remotenode.com:8546');
// or
var web3 = new Web3(Web3.givenProvider || new Web3.providers.WebsocketProvider('ws://
˓→remotenode.com:8546'));

// Using the IPC provider in node.js

var net = require('net');

var web3 = new Web3('/Users/myuser/Library/Ethereum/geth.ipc', net); // mac os path

// or
var web3 = new Web3(new Web3.providers.IpcProvider('/Users/myuser/Library/Ethereum/
˓→geth.ipc', net)); // mac os path

// on windows the path is: "\\\\.\\pipe\\geth.ipc"

// on linux the path is: "/users/myuser/.ethereum/geth.ipc"

5.12 givenProvider

web3.givenProvider
web3.eth.givenProvider
web3.shh.givenProvider
web3.bzz.givenProvider
...

When using web3.js in an Ethereum compatible browser, it will set with the current native provider by that browser.
Will return the given provider by the (browser) environment, otherwise null.

20 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.12.1 Returns

Object: The given provider set or null;

5.12.2 Example

5.13 currentProvider

web3.currentProvider
web3.eth.currentProvider
web3.shh.currentProvider
web3.bzz.currentProvider
...

Will return the current provider, otherwise null.

5.13.1 Returns

Object: The current provider set or null;

5.13.2 Example

5.14 BatchRequest

new web3.BatchRequest()
new web3.eth.BatchRequest()
new web3.shh.BatchRequest()
new web3.bzz.BatchRequest()

Class to create and execute batch requests.

5.14.1 Parameters

none

5.14.2 Returns

Object: With the following methods:

• add(request): To add a request object to the batch call.
• execute(): Will execute the batch request.

5.13. currentProvider 21
web3.js Documentation, Release 1.0.0

5.14.3 Example

var contract = new web3.eth.Contract(abi, address);

var batch = new web3.BatchRequest();

batch.add(web3.eth.getBalance.request('0x0000000000000000000000000000000000000000',
˓→'latest', callback));

batch.add(contract.methods.balance(address).call.request({from:
˓→'0x0000000000000000000000000000000000000000'}, callback2));

batch.execute();

5.15 extend

web3.extend(methods)
web3.eth.extend(methods)
web3.shh.extend(methods)
web3.bzz.extend(methods)
...

Allows extending the web3 modules.

Note: You also have *.extend.formatters as additional formatter functions to be used for in and output
formatting. Please see the source file for function details.

5.15.1 Parameters

1. methods - Object: Extension object with array of methods description objects as follows:
• property - String: (optional) The name of the property to add to the module. If no property is
set it will be added to the module directly.
• methods - Array: The array of method descriptions:
– name - String: Name of the method to add.
– call - String: The RPC method name.
– params - Number: (optional) The number of parameters for that function. Default 0.
– inputFormatter - Array: (optional) Array of inputformatter functions. Each array item
responds to a function parameter, so if you want some parameters not to be formatted, add a
null instead.
– outputFormatter - ``Function: (optional) Can be used to format the output of the
method.

5.15.2 Returns

Object: The extended module.

22 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.15.3 Example

web3.extend({
property: 'myModule',
methods: [{
name: 'getBalance',
call: 'eth_getBalance',
params: 2,
inputFormatter: [web3.extend.formatters.inputAddressFormatter, web3.extend.
˓→formatters.inputDefaultBlockNumberFormatter],

outputFormatter: web3.utils.hexToNumberString
},{
name: 'getGasPriceSuperFunction',
call: 'eth_gasPriceSuper',
params: 2,
inputFormatter: [null, web3.utils.numberToHex]
}]
});

web3.extend({
methods: [{
name: 'directCall',
call: 'eth_callForFun',
}]
});

console.log(web3);
> Web3 {
myModule: {
getBalance: function(){},
getGasPriceSuperFunction: function(){}
},
directCall: function(){},
eth: Eth {...},
bzz: Bzz {...},
...
}

5.16 defaultAccount

web3.eth.defaultAccount

This default address is used as the default "from" property, if no "from" property is specified in for the following
methods:
• web3.eth.sendTransaction()
• web3.eth.call()
• new web3.eth.Contract() -> myContract.methods.myMethod().call()
• new web3.eth.Contract() -> myContract.methods.myMethod().send()

5.16. defaultAccount 23
web3.js Documentation, Release 1.0.0

5.16.1 Property

String - 20 Bytes: Any ethereum address. You should have the private key for that address in your node or keystore.
(Default is undefined)

5.16.2 Example

web3.eth.defaultAccount;
> undefined

// set the default account

web3.eth.defaultAccount = '0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe';

5.17 defaultBlock

web3.eth.defaultBlock

The default block is used for certain methods. You can override it by passing in the defaultBlock as last parameter.
The default value is “latest”.
• web3.eth.getBalance()
• web3.eth.getCode()
• web3.eth.getTransactionCount()
• web3.eth.getStorageAt()
• web3.eth.call()
• new web3.eth.Contract() -> myContract.methods.myMethod().call()

5.17.1 Property

Default block parameters can be one of the following:

• Number: A block number
• "genesis" - String: The genesis block
• "latest" - String: The latest block (current head of the blockchain)
• "pending" - String: The currently mined block (including pending transactions)
Default is "latest"

5.17.2 Example

web3.eth.defaultBlock;
> "latest"

// set the default block

web3.eth.defaultBlock = 231;

24 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.18 defaultHardfork

web3.eth.defaultHardfork

The default hardfork property is used for signing transactions locally.

5.18.1 Property

The default hardfork property can be one of the following:

• "chainstart" - String
• "homestead" - String
• "dao" - String
• "tangerineWhistle" - String
• "spuriousDragon" - String
• "byzantium" - String
• "constantinople" - String
• "petersburg" - String
• "istanbul" - String
Default is "petersburg"

5.18.2 Example

web3.eth.defaultHardfork;
> "petersburg"

// set the default block

web3.eth.defaultHardfork = 'istanbul';

5.19 defaultChain

web3.eth.defaultChain

The default chain property is used for signing transactions locally.

5.19.1 Property

The default chain property can be one of the following:

• "mainnet" - String
• "goerli" - String
• "kovan" - String
• "rinkeby" - String

5.18. defaultHardfork 25
web3.js Documentation, Release 1.0.0

• "ropsten" - String
Default is "mainnet"

5.19.2 Example

web3.eth.defaultChain;
> "mainnet"

// set the default chain

web3.eth.defaultChain = 'goerli';

5.20 defaultCommon

web3.eth.defaultCommon

The default common property is used for signing transactions locally.

5.20.1 Property

The default common property does contain the following Common object:
• customChain - Object: The custom chain properties
– name - string: (optional) The name of the chain
– networkId - number: Network ID of the custom chain
– chainId - number: Chain ID of the custom chain
• baseChain - string: (optional) mainnet, goerli, kovan, rinkeby, or ropsten
• hardfork - string: (optional) chainstart, homestead, dao, tangerineWhistle,
spuriousDragon, byzantium, constantinople, petersburg, or istanbul
Default is undefined.

5.20.2 Example

web3.eth.defaultCommon;
> {customChain: {name: 'custom-network', chainId: 1, networkId: 1}, baseChain:
˓→'mainnet', hardfork: 'petersburg'}

// set the default common

web3.eth.defaultCommon = {customChain: {name: 'custom-network', chainId: 1,
˓→networkId: 1}, baseChain: 'mainnet', hardfork: 'petersburg'};

26 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.21 transactionBlockTimeout

web3.eth.transactionBlockTimeout

The transactionBlockTimeout will be used over a socket based connection. This option does define the
amount of new blocks it should wait until the first confirmation happens. This means the PromiEvent rejects with a
timeout error when the timeout got exceeded.

5.21.1 Returns

number: The current value of transactionBlockTimeout (default: 50)

5.22 transactionConfirmationBlocks

web3.eth.transactionConfirmationBlocks

This defines the number of blocks it requires until a transaction will be handled as confirmed.

5.22.1 Returns

number: The current value of transactionConfirmationBlocks (default: 24)

5.23 transactionPollingTimeout

web3.eth.transactionPollingTimeout

The transactionPollingTimeout will be used over a HTTP connection. This option defines the number of
seconds Web3 will wait for a receipt which confirms that a transaction was mined by the network. NB: If this method
times out, the transaction may still be pending.

5.23.1 Returns

number: The current value of transactionPollingTimeout (default: 750)

5.24 getProtocolVersion

web3.eth.getProtocolVersion([callback])

Returns the ethereum protocol version of the node.

5.21. transactionBlockTimeout 27
web3.js Documentation, Release 1.0.0

5.24.1 Returns

Promise returns String: the protocol version.

5.24.2 Example

web3.eth.getProtocolVersion()
.then(console.log);
> "63"

5.25 isSyncing

web3.eth.isSyncing([callback])

Checks if the node is currently syncing and returns either a syncing object, or false.

5.25.1 Returns

Promise returns Object|Boolean - A sync object when the node is currently syncing or false:
• startingBlock - Number: The block number where the sync started.
• currentBlock - Number: The block number where at which block the node currently synced to already.
• highestBlock - Number: The estimated block number to sync to.
• knownStates - Number: The estimated states to download
• pulledStates - Number: The already downloaded states

5.25.2 Example

web3.eth.isSyncing()
.then(console.log);

> {
startingBlock: 100,
currentBlock: 312,
highestBlock: 512,
knownStates: 234566,
pulledStates: 123455
}

5.26 getCoinbase

28 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

getCoinbase([callback])

Returns the coinbase address to which mining rewards will go.

5.26.1 Returns

Promise returns String - bytes 20: The coinbase address set in the node for mining rewards.

5.26.2 Example

web3.eth.getCoinbase()
.then(console.log);
> "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe"

5.27 isMining

web3.eth.isMining([callback])

Checks whether the node is mining or not.

5.27.1 Returns

Promise returns Boolean: true if the node is mining, otherwise false.

5.27.2 Example

web3.eth.isMining()
.then(console.log);
> true

5.28 getHashrate

web3.eth.getHashrate([callback])

Returns the number of hashes per second that the node is mining with.

5.28.1 Returns

Promise returns Number: Number of hashes per second.

5.27. isMining 29
web3.js Documentation, Release 1.0.0

5.28.2 Example

web3.eth.getHashrate()
.then(console.log);
> 493736

5.29 getGasPrice

web3.eth.getGasPrice([callback])

Returns the current gas price oracle. The gas price is determined by the last few blocks median gas price.

5.29.1 Returns

Promise returns String - Number string of the current gas price in wei.
See the A note on dealing with big numbers in JavaScript.

5.29.2 Example

web3.eth.getGasPrice()
.then(console.log);
> "20000000000"

5.30 getAccounts

web3.eth.getAccounts([callback])

Returns a list of accounts the node controls.

5.30.1 Returns

Promise returns Array - An array of addresses controlled by node.

5.30.2 Example

web3.eth.getAccounts()
.then(console.log);
> ["0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe",
˓→"0xDCc6960376d6C6dEa93647383FfB245CfCed97Cf"]

30 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.31 getBlockNumber

web3.eth.getBlockNumber([callback])

Returns the current block number.

5.31.1 Returns

Promise returns Number - The number of the most recent block.

5.31.2 Example

web3.eth.getBlockNumber()
.then(console.log);
> 2744

5.32 getBalance

web3.eth.getBalance(address [, defaultBlock] [, callback])

Get the balance of an address at a given block.

5.32.1 Parameters

1. String - The address to get the balance of.

2. Number|String - (optional) If you pass this parameter it will not use the default block set with
web3.eth.defaultBlock.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.32.2 Returns

Promise returns String - The current balance for the given address in wei.
See the A note on dealing with big numbers in JavaScript.

5.32.3 Example

web3.eth.getBalance("0x407d73d8a49eeb85d32cf465507dd71d507100c1")
.then(console.log);
> "1000000000000"

5.31. getBlockNumber 31
web3.js Documentation, Release 1.0.0

5.33 getStorageAt

web3.eth.getStorageAt(address, position [, defaultBlock] [, callback])

Get the storage at a specific position of an address.

5.33.1 Parameters

1. String - The address to get the storage from.

2. Number - The index position of the storage.
3. Number|String - (optional) If you pass this parameter it will not use the default block set with
web3.eth.defaultBlock.
4. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.33.2 Returns

Promise returns String - The value in storage at the given position.

5.33.3 Example

web3.eth.getStorageAt("0x407d73d8a49eeb85d32cf465507dd71d507100c1", 0)
.then(console.log);
> "0x033456732123ffff2342342dd12342434324234234fd234fd23fd4f23d4234"

5.34 getCode

web3.eth.getCode(address [, defaultBlock] [, callback])

Get the code at a specific address.

5.34.1 Parameters

1. String - The address to get the code from.

2. Number|String - (optional) If you pass this parameter it will not use the default block set with
web3.eth.defaultBlock.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.34.2 Returns

Promise returns String - The data at given address address.

32 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.34.3 Example

web3.eth.getCode("0xd5677cf67b5aa051bb40496e68ad359eb97cfbf8")
.then(console.log);
>
˓→"0x600160008035811a818181146012578301005b601b6001356025565b8060005260206000f25b60006007820290509190

˓→"

5.35 getBlock

web3.eth.getBlock(blockHashOrBlockNumber [, returnTransactionObjects] [, callback])

Returns a block matching the block number or block hash.

5.35.1 Parameters

1. String|Number - The block number or block hash. Or the string "genesis", "latest" or "pending"
as in the default block parameter.
2. Boolean - (optional, default false) If true, the returned block will contain all transactions as objects, if
false it will only contains the transaction hashes.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.35.2 Returns

Promise returns Object - The block object:

• number - Number: The block number. null when its pending block.
• hash 32 Bytes - String: Hash of the block. null when its pending block.
• parentHash 32 Bytes - String: Hash of the parent block.
• nonce 8 Bytes - String: Hash of the generated proof-of-work. null when its pending block.
• sha3Uncles 32 Bytes - String: SHA3 of the uncles data in the block.
• logsBloom 256 Bytes - String: The bloom filter for the logs of the block. null when its pending block.
• transactionsRoot 32 Bytes - String: The root of the transaction trie of the block
• stateRoot 32 Bytes - String: The root of the final state trie of the block.
• miner - String: The address of the beneficiary to whom the mining rewards were given.
• difficulty - String: Integer of the difficulty for this block.
• totalDifficulty - String: Integer of the total difficulty of the chain until this block.
• extraData - String: The “extra data” field of this block.
• size - Number: Integer the size of this block in bytes.
• gasLimit - Number: The maximum gas allowed in this block.
• gasUsed - Number: The total used gas by all transactions in this block.

5.35. getBlock 33
web3.js Documentation, Release 1.0.0

• timestamp - Number: The unix timestamp for when the block was collated.
• transactions - Array: Array of transaction objects, or 32 Bytes transaction hashes depending on the
returnTransactionObjects parameter.
• uncles - Array: Array of uncle hashes.

5.35.3 Example

web3.eth.getBlock(3150)
.then(console.log);

> {
"number": 3,
"hash": "0xef95f2f1ed3ca60b048b4bf67cde2195961e0bba6f70bcbea9a2c4e133e34b46",
"parentHash": "0x2302e1c0b972d00932deb5dab9eb2982f570597d9d42504c05d9c2147eaf9c88
˓→",

"nonce": "0xfb6e1a62d119228b",
"sha3Uncles": "0x1dcc4de8dec75d7aab85b567b6ccd41ad312451b948a7413f0a142fd40d49347
˓→",

"logsBloom":
˓→"0x000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

˓→",

"transactionsRoot":
˓→"0x3a1b03875115b79539e5bd33fb00d8f7b7cd61929d5a3c574f507b8acf415bee",

"stateRoot": "0xf1133199d44695dfa8fd1bcfe424d82854b5cebef75bddd7e40ea94cda515bcb",
"miner": "0x8888f1f195afa192cfee860698584c030f4c9db1",
"difficulty": '21345678965432',
"totalDifficulty": '324567845321',
"size": 616,
"extraData": "0x",
"gasLimit": 3141592,
"gasUsed": 21662,
"timestamp": 1429287689,
"transactions": [
"0x9fc76417374aa880d4449a1f7f31ec597f00b1f6f3dd2d66f4c9c6c445836d8b"
],
"uncles": []
}

5.36 getBlockTransactionCount

web3.eth.getBlockTransactionCount(blockHashOrBlockNumber [, callback])

Returns the number of transaction in a given block.

5.36.1 Parameters

1. String|Number - The block number or hash. Or the string "genesis", "latest" or "pending" as in
the default block parameter.
2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

34 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.36.2 Returns

Promise returns Number - The number of transactions in the given block.

5.36.3 Example

web3.eth.getBlockTransactionCount("0x407d73d8a49eeb85d32cf465507dd71d507100c1")
.then(console.log);
> 1

5.37 getUncle

web3.eth.getUncle(blockHashOrBlockNumber, uncleIndex [, returnTransactionObjects] [,

˓→callback])

Returns a blocks uncle by a given uncle index position.

5.37.1 Parameters

1. String|Number - The block number or hash. Or the string "genesis", "latest" or "pending" as in
the default block parameter.
2. Number - The index position of the uncle.
3. Boolean - (optional, default false) If true, the returned block will contain all transactions as objects, if
false it will only contains the transaction hashes.
4. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.37.2 Returns

Promise returns Object - the returned uncle. For a return value see web3.eth.getBlock().

Note: An uncle doesn’t contain individual transactions.

5.37.3 Example

web3.eth.getUncle(500, 0)
.then(console.log);
> // see web3.eth.getBlock

5.37. getUncle 35
web3.js Documentation, Release 1.0.0

5.38 getTransaction

web3.eth.getTransaction(transactionHash [, callback])

Returns a transaction matching the given transaction hash.

5.38.1 Parameters

1. String - The transaction hash.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.38.2 Returns

Promise returns Object - A transaction object its hash transactionHash:

• hash 32 Bytes - String: Hash of the transaction.
• nonce - Number: The number of transactions made by the sender prior to this one.
• blockHash 32 Bytes - String: Hash of the block where this transaction was in. null when its pending.
• blockNumber - Number: Block number where this transaction was in. null when its pending.
• transactionIndex - Number: Integer of the transactions index position in the block. null when its
pending.
• from - String: Address of the sender.
• to - String: Address of the receiver. null when its a contract creation transaction.
• value - String: Value transferred in wei.
• gasPrice - String: Gas price provided by the sender in wei.
• gas - Number: Gas provided by the sender.
• input - String: The data sent along with the transaction.

5.38.3 Example

web3.eth.getTransaction(
˓→'0x9fc76417374aa880d4449a1f7f31ec597f00b1f6f3dd2d66f4c9c6c445836d8b§234')

.then(console.log);

> {
"hash": "0x9fc76417374aa880d4449a1f7f31ec597f00b1f6f3dd2d66f4c9c6c445836d8b",
"nonce": 2,
"blockHash": "0xef95f2f1ed3ca60b048b4bf67cde2195961e0bba6f70bcbea9a2c4e133e34b46",
"blockNumber": 3,
"transactionIndex": 0,
"from": "0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b",
"to": "0x6295ee1b4f6dd65047762f924ecd367c17eabf8f",
"value": '123450000000000000',
"gas": 314159,
"gasPrice": '2000000000000',
(continues on next page)

36 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

(continued from previous page)

"input": "0x57cb2fc4"
}

5.39 getTransactionFromBlock

getTransactionFromBlock(hashStringOrNumber, indexNumber [, callback])

Returns a transaction based on a block hash or number and the transactions index position.

5.39.1 Parameters

1. String - A block number or hash. Or the string "genesis", "latest" or "pending" as in the default
block parameter.
2. Number - The transactions index position.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.39.2 Returns

Promise returns Object - A transaction object, see web3.eth.getTransaction:

5.39.3 Example

var transaction = web3.eth.getTransactionFromBlock('0x4534534534', 2)

.then(console.log);
> // see web3.eth.getTransaction

5.40 getTransactionReceipt

web3.eth.getTransactionReceipt(hash [, callback])

Returns the receipt of a transaction by transaction hash.

Note: The receipt is not available for pending transactions and returns null.

5.40.1 Parameters

1. String - The transaction hash.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.39. getTransactionFromBlock 37
web3.js Documentation, Release 1.0.0

5.40.2 Returns

Promise returns Object - A transaction receipt object, or null when no receipt was found:
• status - Boolean: TRUE if the transaction was successful, FALSE, if the EVM reverted the transaction.
• blockHash 32 Bytes - String: Hash of the block where this transaction was in.
• blockNumber - Number: Block number where this transaction was in.
• transactionHash 32 Bytes - String: Hash of the transaction.
• transactionIndex- Number: Integer of the transactions index position in the block.
• from - String: Address of the sender.
• to - String: Address of the receiver. null when its a contract creation transaction.
• contractAddress - String: The contract address created, if the transaction was a contract creation,
otherwise null.
• cumulativeGasUsed - Number: The total amount of gas used when this transaction was executed in the
block.
• gasUsed- Number: The amount of gas used by this specific transaction alone.
• logs - Array: Array of log objects, which this transaction generated.

5.40.3 Example

var receipt = web3.eth.getTransactionReceipt(

˓→'0x9fc76417374aa880d4449a1f7f31ec597f00b1f6f3dd2d66f4c9c6c445836d8b')

.then(console.log);

> {
"status": true,
"transactionHash":
˓→"0x9fc76417374aa880d4449a1f7f31ec597f00b1f6f3dd2d66f4c9c6c445836d8b",

"transactionIndex": 0,
"blockHash": "0xef95f2f1ed3ca60b048b4bf67cde2195961e0bba6f70bcbea9a2c4e133e34b46",
"blockNumber": 3,
"contractAddress": "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe",
"cumulativeGasUsed": 314159,
"gasUsed": 30234,
"logs": [{
// logs as returned by getPastLogs, etc.
}, ...]
}

5.41 getTransactionCount

web3.eth.getTransactionCount(address [, defaultBlock] [, callback])

Get the numbers of transactions sent from this address.

38 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.41.1 Parameters

1. String - The address to get the numbers of transactions from.

2. Number|String - (optional) If you pass this parameter it will not use the default block set with
web3.eth.defaultBlock.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.41.2 Returns

Promise returns Number - The number of transactions sent from the given address.

5.41.3 Example

web3.eth.getTransactionCount("0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe")
.then(console.log);
> 1

5.42 sendTransaction

web3.eth.sendTransaction(transactionObject [, callback])

Sends a transaction to the network.

5.42.1 Parameters

1. Object - The transaction object to send:

• from - String|Number: The address for the sending account. Uses the web3.eth.defaultAccount
property, if not specified. Or an address or index of a local wallet in web3.eth.accounts.wallet.
• to - String: (optional) The destination address of the message, left undefined for a contract-
creation transaction.
• value - Number|String|BN|BigNumber: (optional) The value transferred for the transaction
in wei, also the endowment if it’s a contract-creation transaction.
• gas - Number: (optional, default: To-Be-Determined) The amount of gas to use for the transaction
(unused gas is refunded).
• gasPrice - Number|String|BN|BigNumber: (optional) The price of gas for this transaction
in wei, defaults to web3.eth.gasPrice.
• data - String: (optional) Either a ABI byte string containing the data of the function call on a
contract, or in the case of a contract-creation transaction the initialisation code.
• nonce - Number: (optional) Integer of a nonce. This allows to overwrite your own pending transac-
tions that use the same nonce.
• chain - String: (optional) Defaults to mainnet.
• hardfork - String: (optional) Defaults to petersburg.

5.42. sendTransaction 39
web3.js Documentation, Release 1.0.0

• common - Object: (optional) The common object

– customChain - Object: The custom chain properties

* name - string: (optional) The name of the chain

* networkId - number: Network ID of the custom chain
* chainId - number: Chain ID of the custom chain
– baseChain - string: (optional) mainnet, goerli, kovan, rinkeby, or ropsten
– hardfork - string: (optional) chainstart, homestead, dao,
tangerineWhistle, spuriousDragon, byzantium, constantinople,
petersburg, or istanbul
2. callback - Function: (optional) Optional callback, returns an error object as first parameter and the result
as second.

Note: The from property can also be an address or index from the web3.eth.accounts.wallet. It will then sign locally
using the private key of that account, and send the transaction via web3.eth.sendSignedTransaction(). If the properties
chain and hardfork or common are not set, Web3 will try to set appropriate values by

querying the network for its chainId and networkId.

5.42.2 Returns

The callback will return the 32 bytes transaction hash.

PromiEvent: A promise combined event emitter. Will be resolved when the transaction receipt is available. Addi-
tionally the following events are available:
• "transactionHash" returns String: Is fired right after the transaction is sent and a transaction hash is
available.
• "receipt" returns Object: Is fired when the transaction receipt is available.
• "confirmation" returns Number, Object: Is fired for every confirmation up to the 12th confirmation.
Receives the confirmation number as the first and the receipt as the second argument. Fired from confirmation
0 on, which is the block where its minded.
"error" returns Error and Object|undefined: Is fired if an error occurs during sending. If the transaction
was rejected by the network with a receipt, the second parameter will be the receipt.

5.42.3 Example

// compiled solidity source code using https://remix.ethereum.org

var code =
˓→"603d80600c6000396000f3007c01000000000000000000000000000000000000000000000000000000006000350463c688

˓→";

// using the callback

web3.eth.sendTransaction({
from: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe',
data: code // deploying a contracrt
}, function(error, hash){
(continues on next page)

40 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

(continued from previous page)

...
});

// using the promise

web3.eth.sendTransaction({
from: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe',
to: '0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe',
value: '1000000000000000'
})
.then(function(receipt){
...
});

// using the event emitter

web3.eth.sendTransaction({
from: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe',
to: '0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe',
value: '1000000000000000'
})
.on('transactionHash', function(hash){
...
})
.on('receipt', function(receipt){
...
})
.on('confirmation', function(confirmationNumber, receipt){ ... })
.on('error', console.error); // If a out of gas error, the second parameter is the
˓→receipt.

5.43 sendSignedTransaction

web3.eth.sendSignedTransaction(signedTransactionData [, callback])

Sends an already signed transaction, generated for example using web3.eth.accounts.signTransaction.

5.43.1 Parameters

1. String - Signed transaction data in HEX format

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.43.2 Returns

PromiEvent: A promise combined event emitter. Will be resolved when the transaction receipt is available.
Please see the return values for web3.eth.sendTransaction for details.

5.43. sendSignedTransaction 41
web3.js Documentation, Release 1.0.0

5.43.3 Example

var Tx = require('ethereumjs-tx').Transaction;
var privateKey = Buffer.from(
˓→'e331b6d69882b4cb4ea581d88e0b604039a3de5967688d3dcffdd2270c0fd109', 'hex');

var rawTx = {
nonce: '0x00',
gasPrice: '0x09184e72a000',
gasLimit: '0x2710',
to: '0x0000000000000000000000000000000000000000',
value: '0x00',
data: '0x7f7465737432000000000000000000000000000000000000000000000000000000600057'
}

var tx = new Tx(rawTx, {'chain':'ropsten'});

tx.sign(privateKey);

var serializedTx = tx.serialize();

// console.log(serializedTx.toString('hex'));
//
˓→0xf889808609184e72a00082271094000000000000000000000000000000000000000080a47f74657374320000000000000

web3.eth.sendSignedTransaction('0x' + serializedTx.toString('hex'))
.on('receipt', console.log);

> // see eth.getTransactionReceipt() for details

Note: When use the package ethereumjs-tx at the version of 2.0.0, if we don’t specify the parameter chain, it will use
mainnet, so if you wan to use at the other network, you should add this parameter chain to specify.

5.44 sign

web3.eth.sign(dataToSign, address [, callback])

Signs data using a specific account. This account needs to be unlocked.

5.44.1 Parameters

1. String - Data to sign. If String it will be converted using web3.utils.utf8ToHex.

2. String|Number - Address to sign data with. Or an address or index of a local wallet in
web3.eth.accounts.wallet.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

Note: The 2. address parameter can also be an address or index from the web3.eth.accounts.wallet. It will then
sign locally using the private key of this account.

42 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.44.2 Returns

Promise returns String - The signature.

5.44.3 Example

web3.eth.sign("Hello world", "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe")

.then(console.log);
>
˓→"0x30755ed65396facf86c53e6217c52b4daebe72aa4941d89635409de4c9c7f9466d4e9aaec7977f05e923889b33c0d0dd

˓→"

// the below is the same

web3.eth.sign(web3.utils.utf8ToHex("Hello world"),
˓→"0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe")

.then(console.log);
>
˓→"0x30755ed65396facf86c53e6217c52b4daebe72aa4941d89635409de4c9c7f9466d4e9aaec7977f05e923889b33c0d0dd

˓→"

5.45 signTransaction

web3.eth.signTransaction(transactionObject, address [, callback])

Signs a transaction. This account needs to be unlocked.

5.45.1 Parameters

1. Object - The transaction data to sign web3.eth.sendTransaction() for more.

2. String - Address to sign transaction with.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.45.2 Returns

Promise returns Object - The RLP encoded transaction. The raw property can be used to send the transaction
using web3.eth.sendSignedTransaction.

5.45.3 Example

web3.eth.signTransaction({
from: "0xEB014f8c8B418Db6b45774c326A0E64C78914dC0",
gasPrice: "20000000000",
gas: "21000",
to: '0x3535353535353535353535353535353535353535',
value: "1000000000000000000",
data: ""
(continues on next page)

5.45. signTransaction 43
web3.js Documentation, Release 1.0.0

(continued from previous page)

}).then(console.log);
> {
raw:
˓→'0xf86c808504a817c800825208943535353535353535353535353535353535353535880de0b6b3a76400008025a04f4c17

˓→',

tx: {
nonce: '0x0',
gasPrice: '0x4a817c800',
gas: '0x5208',
to: '0x3535353535353535353535353535353535353535',
value: '0xde0b6b3a7640000',
input: '0x',
v: '0x25',
r: '0x4f4c17305743700648bc4f6cd3038ec6f6af0df73e31757007b7f59df7bee88d',
s: '0x7e1941b264348e80c78c4027afc65a87b0a5e43e86742b8ca0823584c6788fd0',
hash: '0xda3be87732110de6c1354c83770aae630ede9ac308d9f7b399ecfba23d923384'
}
}

5.46 call

web3.eth.call(callObject [, defaultBlock] [, callback])

Executes a message call transaction, which is directly executed in the VM of the node, but never mined into the
blockchain.

5.46.1 Parameters

1. Object - A transaction object see web3.eth.sendTransaction, with the difference that for calls the from prop-
erty is optional as well.
2. Number|String - (optional) If you pass this parameter it will not use the default block set with
web3.eth.defaultBlock.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.46.2 Returns

Promise returns String: The returned data of the call, e.g. a smart contract functions return value.

5.46.3 Example

web3.eth.call({
to: "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe", // contract address
data: "0xc6888fa10000000000000000000000000000000000000000000000000000000000000003"
})
.then(console.log);
> "0x000000000000000000000000000000000000000000000000000000000000000a"

44 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.47 estimateGas

web3.eth.estimateGas(callObject [, callback])

Executes a message call or transaction and returns the amount of the gas used.

5.47.1 Parameters

1. Object - A transaction object see web3.eth.sendTransaction, with the difference that for calls the from prop-
erty is optional as well.
2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.47.2 Returns

Promise returns Number - the used gas for the simulated call/transaction.

5.47.3 Example

web3.eth.estimateGas({
to: "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe",
data: "0xc6888fa10000000000000000000000000000000000000000000000000000000000000003"
})
.then(console.log);
> "0x0000000000000000000000000000000000000000000000000000000000000015"

5.48 getPastLogs

web3.eth.getPastLogs(options [, callback])

Gets past logs, matching the given options.

5.48.1 Parameters

1. Object - The filter options as follows:

• fromBlock - Number|String: The number of the earliest block ("latest" may be given to mean the
most recent and "pending" currently mining, block). By default "latest".
• toBlock - Number|String: The number of the latest block ("latest" may be given to mean the most
recent and "pending" currently mining, block). By default "latest".
• address - String|Array: An address or a list of addresses to only get logs from particular account(s).
• topics - Array: An array of values which must each appear in the log entries. The order is important, if you
want to leave topics out use null, e.g. [null, '0x12...']. You can also pass an array for each topic
with options for that topic e.g. [null, ['option1', 'option2']]

5.47. estimateGas 45
web3.js Documentation, Release 1.0.0

5.48.2 Returns

Promise returns Array - Array of log objects.

The structure of the returned event Object in the Array looks as follows:
• address - String: From which this event originated from.
• data - String: The data containing non-indexed log parameter.
• topics - Array: An array with max 4 32 Byte topics, topic 1-3 contains indexed parameters of the log.
• logIndex - Number: Integer of the event index position in the block.
• transactionIndex - Number: Integer of the transaction’s index position, the event was created in.
• transactionHash 32 Bytes - String: Hash of the transaction this event was created in.
• blockHash 32 Bytes - String: Hash of the block where this event was created in. null when its still
pending.
• blockNumber - Number: The block number where this log was created in. null when still pending.

5.48.3 Example

web3.eth.getPastLogs({
address: "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe",
topics: ["0x033456732123ffff2342342dd12342434324234234fd234fd23fd4f23d4234"]
})
.then(console.log);

> [{
data: '0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',
topics: ['0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385']

logIndex: 0,
transactionIndex: 0,
transactionHash:
˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',

blockHash: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
blockNumber: 1234,
address: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'
},{...}]

5.49 getWork

web3.eth.getWork([callback])

Gets work for miners to mine on. Returns the hash of the current block, the seedHash, and the boundary condition to
be met (“target”).

5.49.1 Parameters

1. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

46 Chapter 5. web3.eth
 web3.js Documentation, Release 1.0.0

5.49.2 Returns

Promise returns Array - the mining work with the following structure:
• String 32 Bytes - at index 0: current block header pow-hash
• String 32 Bytes - at index 1: the seed hash used for the DAG.
• String 32 Bytes - at index 2: the boundary condition (“target”), 2^256 / difficulty.

5.49.3 Example

web3.eth.getWork()
.then(console.log);
> [
"0x1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef",
"0x5EED00000000000000000000000000005EED0000000000000000000000000000",
"0xd1ff1c01710000000000000000000000d1ff1c01710000000000000000000000"
]

5.50 submitWork

web3.eth.submitWork(nonce, powHash, digest, [callback])

Used for submitting a proof-of-work solution.

5.50.1 Parameters

1. String 8 Bytes: The nonce found (64 bits)

2. String 32 Bytes: The header’s pow-hash (256 bits)
3. String 32 Bytes: The mix digest (256 bits)
4. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

5.50.2 Returns

Promise returns Boolean - Returns TRUE if the provided solution is valid, otherwise false.

5.50.3 Example

web3.eth.submitWork([
"0x0000000000000001",
"0x1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef",
"0xD1FE5700000000000000000000000000D1FE5700000000000000000000000000"
])
.then(console.log);
> true

5.50. submitWork 47
web3.js Documentation, Release 1.0.0

5.51 getChainId

web3.eth.getChainId([callback])

Returns the chain ID of the current connected node as described in the EIP-695.

5.51.1 Returns

Promise<Number> - Returns chain ID.

5.51.2 Example

web3.eth.getChainId().then(console.log);
> 61

5.52 getNodeInfo

web3.eth.getNodeInfo([callback])

5.52.1 Returns

Promise<String> - The current client version.

5.52.2 Example

web3.eth.getNodeInfo().then(console.log);
> "Mist/v0.9.3/darwin/go1.4.1"

48 Chapter 5. web3.eth
 CHAPTER 6

web3.eth.subscribe

The web3.eth.subscribe function lets you subscribe to specific events in the blockchain.

6.1 subscribe

web3.eth.subscribe(type [, options] [, callback]);

6.1.1 Parameters

1. String - The subscription, you want to subscribe to.

2. Mixed - (optional) Optional additional parameters, depending on the subscription type.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.
Will be called for each incoming subscription, and the subscription itself as 3 parameter.

6.1.2 Returns

EventEmitter - A Subscription instance

• subscription.id: The subscription id, used to identify and unsubscribing the subscription.
• subscription.subscribe([callback]): Can be used to re-subscribe with the same parameters.
• subscription.unsubscribe([callback]): Unsubscribes the subscription and returns TRUE in the
callback if successfull.
• subscription.arguments: The subscription arguments, used when re-subscribing.
• on("data") returns Object: Fires on each incoming log with the log object as argument.
• on("changed") returns Object: Fires on each log which was removed from the blockchain. The log will
have the additional property "removed: true".

49
web3.js Documentation, Release 1.0.0

• on("error") returns Object: Fires when an error in the subscription occurs.

• on("connected") returns String: Fires once after the subscription successfully connected. Returns the
subscription id.

6.1.3 Notification returns

• Mixed - depends on the subscription, see the different subscriptions for more.

6.1.4 Example

var subscription = web3.eth.subscribe('logs', {

address: '0x123456..',
topics: ['0x12345...']
}, function(error, result){
if (!error)
console.log(result);
});

// unsubscribes the subscription

subscription.unsubscribe(function(error, success){
if(success)
console.log('Successfully unsubscribed!');
});

6.2 clearSubscriptions

web3.eth.clearSubscriptions()

Resets subscriptions.

Note: This will not reset subscriptions from other packages like web3-shh, as they use their own requestManager.

6.2.1 Parameters

1. Boolean: If true it keeps the "syncing" subscription.

6.2.2 Returns

Boolean

6.2.3 Example

50 Chapter 6. web3.eth.subscribe
 web3.js Documentation, Release 1.0.0

web3.eth.subscribe('logs', {} ,function(){ ... });

...

web3.eth.clearSubscriptions();

6.3 subscribe(“pendingTransactions”)

web3.eth.subscribe('pendingTransactions' [, callback]);

Subscribes to incoming pending transactions.

6.3.1 Parameters

1. String - "pendingTransactions", the type of the subscription.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.
Will be called for each incoming subscription.

6.3.2 Returns

EventEmitter: An subscription instance as an event emitter with the following events:

• "data" returns String: Fires on each incoming pending transaction and returns the transaction hash.
• "error" returns Object: Fires when an error in the subscription occurs.

6.3.3 Notification returns

1. Object|Null - First parameter is an error object if the subscription failed.

2. String - Second parameter is the transaction hash.

6.3.4 Example

var subscription = web3.eth.subscribe('pendingTransactions', function(error, result){

if (!error)
console.log(result);
})
.on("data", function(transaction){
console.log(transaction);
});

// unsubscribes the subscription

subscription.unsubscribe(function(error, success){
if(success)
console.log('Successfully unsubscribed!');
});

6.3. subscribe(“pendingTransactions”) 51
web3.js Documentation, Release 1.0.0

6.4 subscribe(“newBlockHeaders”)

web3.eth.subscribe('newBlockHeaders' [, callback]);

Subscribes to incoming block headers. This can be used as timer to check for changes on the blockchain.

6.4.1 Parameters

1. String - "newBlockHeaders", the type of the subscription.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.
Will be called for each incoming subscription.

6.4.2 Returns

EventEmitter: An subscription instance as an event emitter with the following events:

• "data" returns Object: Fires on each incoming block header.
• "error" returns Object: Fires when an error in the subscription occurs.
• "connected" returns Number: Fires once after the subscription successfully connected. Returns the sub-
scription id.
The structure of a returned block header is as follows:
• number - Number: The block number. null when its pending block.
• hash 32 Bytes - String: Hash of the block. null when its pending block.
• parentHash 32 Bytes - String: Hash of the parent block.
• nonce 8 Bytes - String: Hash of the generated proof-of-work. null when its pending block.
• sha3Uncles 32 Bytes - String: SHA3 of the uncles data in the block.
• logsBloom 256 Bytes - String: The bloom filter for the logs of the block. null when its pending block.
• transactionsRoot 32 Bytes - String: The root of the transaction trie of the block
• stateRoot 32 Bytes - String: The root of the final state trie of the block.
• receiptsRoot 32 Bytes - String: The root of the receipts.
• miner - String: The address of the beneficiary to whom the mining rewards were given.
• extraData - String: The “extra data” field of this block.
• gasLimit - Number: The maximum gas allowed in this block.
• gasUsed - Number: The total used gas by all transactions in this block.
• timestamp - Number: The unix timestamp for when the block was collated.

6.4.3 Notification returns

1. Object|Null - First parameter is an error object if the subscription failed.

2. Object - The block header object like above.

52 Chapter 6. web3.eth.subscribe
 web3.js Documentation, Release 1.0.0

6.4.4 Example

var subscription = web3.eth.subscribe('newBlockHeaders', function(error, result){

if (!error) {
console.log(result);

return;
}

console.error(error);
})
.on("connected", function(subscriptionId){
console.log(subscriptionId);
})
.on("data", function(blockHeader){
console.log(blockHeader);
})
.on("error", console.error);

// unsubscribes the subscription

subscription.unsubscribe(function(error, success){
if (success) {
console.log('Successfully unsubscribed!');
}
});

6.5 subscribe(“syncing”)

web3.eth.subscribe('syncing' [, callback]);

Subscribe to syncing events. This will return an object when the node is syncing and when its finished syncing will
return FALSE.

6.5.1 Parameters

1. String - "syncing", the type of the subscription.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.
Will be called for each incoming subscription.

6.5.2 Returns

EventEmitter: An subscription instance as an event emitter with the following events:

• "data" returns Object: Fires on each incoming sync object as argument.
• "changed" returns Object: Fires when the synchronisation is started with true and when finished with
false.
• "error" returns Object: Fires when an error in the subscription occurs.
For the structure of a returned event Object see web3.eth.isSyncing return values.

6.5. subscribe(“syncing”) 53
web3.js Documentation, Release 1.0.0

6.5.3 Notification returns

1. Object|Null - First parameter is an error object if the subscription failed.

2. Object|Boolean - The syncing object, when started it will return true once or when finished it will return
false once.

6.5.4 Example

var subscription = web3.eth.subscribe('syncing', function(error, sync){

if (!error)
console.log(sync);
})
.on("data", function(sync){
// show some syncing stats
})
.on("changed", function(isSyncing){
if(isSyncing) {
// stop app operation
} else {
// regain app operation
}
});

// unsubscribes the subscription

subscription.unsubscribe(function(error, success){
if(success)
console.log('Successfully unsubscribed!');
});

6.6 subscribe(“logs”)

web3.eth.subscribe('logs', options [, callback]);

Subscribes to incoming logs, filtered by the given options.

6.6.1 Parameters

1. "logs" - String, the type of the subscription.

2. Object - The subscription options
• fromBlock - Number: The number of the earliest block. By default null.
• address - String|Array: An address or a list of addresses to only get logs from particular account(s).
• topics - Array: An array of values which must each appear in the log entries. The order is important, if
you want to leave topics out use null, e.g. [null, '0x00...']. You can also pass another array for each
topic with options for that topic e.g. [null, ['option1', 'option2']]
3. callback - Function: (optional) Optional callback, returns an error object as first parameter and the result
as second. Will be called for each incoming subscription.

54 Chapter 6. web3.eth.subscribe
 web3.js Documentation, Release 1.0.0

6.6.2 Returns

EventEmitter: An subscription instance as an event emitter with the following events:

• "data" returns Object: Fires on each incoming log with the log object as argument.
• "changed" returns Object: Fires on each log which was removed from the blockchain. The log will have
the additional property "removed: true".
• "error" returns Object: Fires when an error in the subscription occurs.
• "connected" returns Number: Fires once after the subscription successfully connected. Returns the sub-
scription id.
For the structure of a returned event Object see web3.eth.getPastEvents return values.

6.6.3 Notification returns

1. Object|Null - First parameter is an error object if the subscription failed.

2. Object - The log object like in web3.eth.getPastEvents return values.

6.6.4 Example

var subscription = web3.eth.subscribe('logs', {

address: '0x123456..',
topics: ['0x12345...']
}, function(error, result){
if (!error)
console.log(result);
})
.on("connected", function(subscriptionId){
console.log(subscriptionId);
})
.on("data", function(log){
console.log(log);
})
.on("changed", function(log){
});

// unsubscribes the subscription

subscription.unsubscribe(function(error, success){
if(success)
console.log('Successfully unsubscribed!');
});

6.6. subscribe(“logs”) 55
web3.js Documentation, Release 1.0.0

56 Chapter 6. web3.eth.subscribe
 CHAPTER 7

web3.eth.Contract

The web3.eth.Contract object makes it easy to interact with smart contracts on the ethereum blockchain. When
you create a new contract object you give it the json interface of the respective smart contract and web3 will auto
convert all calls into low level ABI calls over RPC for you.
This allows you to interact with smart contracts as if they were JavaScript objects.
To use it standalone:

7.1 new contract

new web3.eth.Contract(jsonInterface[, address][, options])

Creates a new contract instance with all its methods and events defined in its json interface object.

7.1.1 Parameters

1. jsonInterface - Object: The json interface for the contract to instantiate

2. address - String (optional): The address of the smart contract to call, can be added later using
myContract.options.address = '0x1234..'
3. options - Object (optional): The options of the contract. Some are used as fallbacks for calls and transactions:

• from - String: The address transactions should be made from.

• gasPrice - String: The gas price in wei to use for transactions.
• gas - Number: The maximum gas provided for a transaction (gas limit).
• data - String: The byte code of the contract. Used when the contract gets deployed.

57
web3.js Documentation, Release 1.0.0

7.1.2 Returns

Object: The contract instance with all its methods and events.

7.1.3 Example

var myContract = new web3.eth.Contract([...],

˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe', {

from: '0x1234567890123456789012345678901234567891', // default from address

gasPrice: '20000000000' // default gas price in wei, 20 gwei in this case
});

7.2 = Properties =

7.3 defaultAccount

web3.eth.Contract.defaultAccount
contract.defaultAccount // on contract instance

This default address is used as the default "from" property, if no "from" property is specified in for the following
methods:
• web3.eth.sendTransaction()
• web3.eth.call()
• new web3.eth.Contract() -> myContract.methods.myMethod().call()
• new web3.eth.Contract() -> myContract.methods.myMethod().send()

7.3.1 Property

String - 20 Bytes: Any ethereum address. You should have the private key for that address in your node or keystore.
(Default is undefined)

7.3.2 Example

web3.eth.defaultAccount;
> undefined

// set the default account

web3.eth.defaultAccount = '0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe';

58 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

7.4 defaultBlock

web3.eth.Contract.defaultBlock
contract.defaultBlock // on contract instance

The default block is used for certain methods. You can override it by passing in the defaultBlock as last parameter.
The default value of it is “latest”.

7.4.1 Property

The default block parameters can be one of the following:

• Number: A block number
• "genesis" - String: The genesis block
• "latest" - String: The latest block (current head of the blockchain)
• "pending" - String: The currently mined block (including pending transactions)
Default is "latest"

7.4.2 Example

contract.defaultBlock;
> "latest"

// set the default block

contract.defaultBlock = 231;

7.5 defaultHardfork

contract.defaultHardfork

The default hardfork property is used for signing transactions locally.

7.5.1 Property

The default hardfork property can be one of the following:

• "chainstart" - String
• "homestead" - String
• "dao" - String
• "tangerineWhistle" - String
• "spuriousDragon" - String
• "byzantium" - String
• "constantinople" - String

7.4. defaultBlock 59
web3.js Documentation, Release 1.0.0

• "petersburg" - String
• "istanbul" - String
Default is "petersburg"

7.5.2 Example

contract.defaultHardfork;
> "petersburg"

// set the default block

contract.defaultHardfork = 'istanbul';

7.6 defaultChain

contract.defaultChain

The default chain property is used for signing transactions locally.

7.6.1 Property

The default chain property can be one of the following:

• "mainnet" - String
• "goerli" - String
• "kovan" - String
• "rinkeby" - String
• "ropsten" - String
Default is "mainnet"

7.6.2 Example

contract.defaultChain;
> "mainnet"

// set the default chain

contract.defaultChain = 'goerli';

7.7 defaultCommon

contract.defaultCommon

The default common property is used for signing transactions locally.

60 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

7.7.1 Property

The default common property does contain the following Common object:
• customChain - Object: The custom chain properties
– name - string: (optional) The name of the chain
– networkId - number: Network ID of the custom chain
– chainId - number: Chain ID of the custom chain
• baseChain - string: (optional) mainnet, goerli, kovan, rinkeby, or ropsten
• hardfork - string: (optional) chainstart, homestead, dao, tangerineWhistle,
spuriousDragon, byzantium, constantinople, petersburg, or istanbul
Default is undefined.

7.7.2 Example

contract.defaultCommon;
> {customChain: {name: 'custom-network', chainId: 1, networkId: 1}, baseChain:
˓→'mainnet', hardfork: 'petersburg'}

// set the default common

contract.defaultCommon = {customChain: {name: 'custom-network', chainId: 1,
˓→networkId: 1}, baseChain: 'mainnet', hardfork: 'petersburg'};

7.8 transactionBlockTimeout

web3.eth.Contract.transcationBlockTimeout
contract.transactionBlockTimeout // on contract instance

The transactionBlockTimeout will be used over a socket based connection. This option does define the
amount of new blocks it should wait until the first confirmation happens. This means the PromiEvent rejects with a
timeout error when the timeout got exceeded.

7.8.1 Returns

number: The current value of transactionBlockTimeout (default: 50)

7.9 transactionConfirmationBlocks

web3.eth.Contract.transactionConfirmationBlocks
contract.transactionConfirmationBlocks // on contract instance

This defines the number of blocks it requires until a transaction will be handled as confirmed.

7.8. transactionBlockTimeout 61
web3.js Documentation, Release 1.0.0

7.9.1 Returns

number: The current value of transactionConfirmationBlocks (default: 24)

7.10 transactionPollingTimeout

web3.eth.Contract.transactionPollingTimeout
contract.transactionPollingTimeout // on contract instance

The transactionPollingTimeout will be used over a HTTP connection. This option defines the number of
seconds Web3 will wait for a receipt which confirms that a transaction was mined by the network. NB: If this method
times out, the transaction may still be pending.

7.10.1 Returns

number: The current value of transactionPollingTimeout (default: 750)

7.11 options

myContract.options

The options object for the contract instance. from, gas and gasPrice are used as fallback values when sending
transactions.

7.11.1 Properties

Object - options:
• address - String: The address where the contract is deployed. See options.address.
• jsonInterface - Array: The json interface of the contract. See options.jsonInterface.
• data - String: The byte code of the contract. Used when the contract gets deployed.
• from - String: The address transactions should be made from.
• gasPrice - String: The gas price in wei to use for transactions.
• gas - Number: The maximum gas provided for a transaction (gas limit).

7.11.2 Example

62 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

myContract.options;
> {
address: '0x1234567890123456789012345678901234567891',
jsonInterface: [...],
from: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe',
gasPrice: '10000000000000',
gas: 1000000
}

myContract.options.from = '0x1234567890123456789012345678901234567891'; // default

˓→from address

myContract.options.gasPrice = '20000000000000'; // default gas price in wei

myContract.options.gas = 5000000; // provide as fallback always 5M gas

7.12 options.address

myContract.options.address

The address used for this contract instance. All transactions generated by web3.js from this contract will contain this
address as the “to”.
The address will be stored in lowercase.

7.12.1 Property

address - String|null: The address for this contract, or null if it’s not yet set.

7.12.2 Example

myContract.options.address;
> '0xde0b295669a9fd93d5f28d9ec85e40f4cb697bae'

// set a new address

myContract.options.address = '0x1234FFDD...';

7.13 options.jsonInterface

myContract.options.jsonInterface

The json interface object derived from the ABI of this contract.

7.13.1 Property

jsonInterface - Array: The json interface for this contract. Re-setting this will regenerate the methods and
events of the contract instance.

7.12. options.address 63
web3.js Documentation, Release 1.0.0

7.13.2 Example

myContract.options.jsonInterface;
> [{
"type":"function",
"name":"foo",
"inputs": [{"name":"a","type":"uint256"}],
"outputs": [{"name":"b","type":"address"}]
},{
"type":"event",
"name":"Event",
"inputs": [{"name":"a","type":"uint256","indexed":true},{"name":"b","type":
˓→"bytes32","indexed":false}],

}]

// set a new interface

myContract.options.jsonInterface = [...];

7.14 = Methods =

7.15 clone

myContract.clone()

Clones the current contract instance.

7.15.1 Parameters

none

7.15.2 Returns

Object: The new contract instance.

7.15.3 Example

var contract1 = new eth.Contract(abi, address, {gasPrice: '12345678', from:

˓→fromAddress});

var contract2 = contract1.clone();

contract2.options.address = address2;

(contract1.options.address !== contract2.options.address);

> true

64 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

7.16 deploy

myContract.deploy(options)

Call this function to deploy the contract to the blockchain. After successful deployment the promise will resolve with
a new contract instance.

7.16.1 Parameters

1. options - Object: The options used for deployment.

• data - String: The byte code of the contract.
• arguments - Array (optional): The arguments which get passed to the constructor on deploy-
ment.

7.16.2 Returns

Object: The transaction object:

• Array - arguments: The arguments passed to the method before. They can be changed.
• Function - send: Will deploy the contract. The promise will resolve with the new contract instance, instead
of the receipt!
• Function - estimateGas: Will estimate the gas used for deploying.
• Function - encodeABI: Encodes the ABI of the deployment, which is contract data + constructor parameters
For details to the methods see the documentation below.

7.16.3 Example

myContract.deploy({
data: '0x12345...',
arguments: [123, 'My String']
})
.send({
from: '0x1234567890123456789012345678901234567891',
gas: 1500000,
gasPrice: '30000000000000'
}, function(error, transactionHash){ ... })
.on('error', function(error){ ... })
.on('transactionHash', function(transactionHash){ ... })
.on('receipt', function(receipt){
console.log(receipt.contractAddress) // contains the new contract address
})
.on('confirmation', function(confirmationNumber, receipt){ ... })
.then(function(newContractInstance){
console.log(newContractInstance.options.address) // instance with the new
˓→contract address

});

// When the data is already set as an option to the contract itself

(continues on next page)

7.16. deploy 65
web3.js Documentation, Release 1.0.0

(continued from previous page)

myContract.options.data = '0x12345...';

myContract.deploy({
arguments: [123, 'My String']
})
.send({
from: '0x1234567890123456789012345678901234567891',
gas: 1500000,
gasPrice: '30000000000000'
})
.then(function(newContractInstance){
console.log(newContractInstance.options.address) // instance with the new
˓→contract address

});

// Simply encoding
myContract.deploy({
data: '0x12345...',
arguments: [123, 'My String']
})
.encodeABI();
> '0x12345...0000012345678765432'

// Gas estimation
myContract.deploy({
data: '0x12345...',
arguments: [123, 'My String']
})
.estimateGas(function(err, gas){
console.log(gas);
});

7.17 methods

myContract.methods.myMethod([param1[, param2[, ...]]])

Creates a transaction object for that method, which then can be called, send, estimated.
The methods of this smart contract are available through:
• The name: myContract.methods.myMethod(123)
• The name with parameters: myContract.methods['myMethod(uint256)'](123)
• The signature: myContract.methods['0x58cf5f10'](123)
This allows calling functions with same name but different parameters from the JavaScript contract object.

7.17.1 Parameters

Parameters of any method depend on the smart contracts methods, defined in the JSON interface.

66 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

7.17.2 Returns

Object: The transaction object:

• Array - arguments: The arguments passed to the method before. They can be changed.
• Function - call: Will call the “constant” method and execute its smart contract method in the EVM without
sending a transaction (Can’t alter the smart contract state).
• Function - send: Will send a transaction to the smart contract and execute its method (Can alter the smart
contract state).
• Function - estimateGas: Will estimate the gas used when the method would be executed on chain.
• Function - encodeABI: Encodes the ABI for this method. This can be send using a transaction, call the
method or passing into another smart contracts method as argument.
For details to the methods see the documentation below.

7.17.3 Example

// calling a method

myContract.methods.myMethod(123).call({from:
˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'}, function(error, result){

...
});

// or sending and using a promise

myContract.methods.myMethod(123).send({from:
˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'})

.then(function(receipt){
// receipt can also be a new contract instance, when coming from a "contract.
˓→deploy({...}).send()"

});

// or sending and using the events

myContract.methods.myMethod(123).send({from:
˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'})

.on('transactionHash', function(hash){
...
})
.on('receipt', function(receipt){
...
})
.on('confirmation', function(confirmationNumber, receipt){
...
})
.on('error', console.error);

7.18 methods.myMethod.call

7.18. methods.myMethod.call 67
web3.js Documentation, Release 1.0.0

myContract.methods.myMethod([param1[, param2[, ...]]]).call(options[, callback])

Will call a “constant” method and execute its smart contract method in the EVM without sending any transaction.
Note calling can not alter the smart contract state.

7.18.1 Parameters

1. options - Object (optional): The options used for calling.

• from - String (optional): The address the call “transaction” should be made from.
• gasPrice - String (optional): The gas price in wei to use for this call “transaction”.
• gas - Number (optional): The maximum gas provided for this call “transaction” (gas limit).
2. callback - Function (optional): This callback will be fired with the result of the smart contract method
execution as the second argument, or with an error object as the first argument.

7.18.2 Returns

Promise returns Mixed: The return value(s) of the smart contract method. If it returns a single value, it’s returned
as is. If it has multiple return values they are returned as an object with properties and indices:

7.18.3 Example

// using the callback

myContract.methods.myMethod(123).call({from:
˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'}, function(error, result){

...
});

// using the promise

myContract.methods.myMethod(123).call({from:
˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'})

.then(function(result){
...
});

// MULTI-ARGUMENT RETURN:

// Solidity
contract MyContract {
function myFunction() returns(uint256 myNumber, string myString) {
return (23456, "Hello!%");
}
}

// web3.js
var MyContract = new web3.eth.Contract(abi, address);
MyContract.methods.myFunction().call()
.then(console.log);
> Result {
myNumber: '23456',
(continues on next page)

68 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

(continued from previous page)

myString: 'Hello!%',
0: '23456', // these are here as fallbacks if the name is not know or given
1: 'Hello!%'
}

// SINGLE-ARGUMENT RETURN:

// Solidity
contract MyContract {
function myFunction() returns(string myString) {
return "Hello!%";
}
}

// web3.js
var MyContract = new web3.eth.Contract(abi, address);
MyContract.methods.myFunction().call()
.then(console.log);
> "Hello!%"

7.19 methods.myMethod.send

myContract.methods.myMethod([param1[, param2[, ...]]]).send(options[, callback])

Will send a transaction to the smart contract and execute its method. Note this can alter the smart contract state.

7.19.1 Parameters

1. options - Object: The options used for sending.

• from - String: The address the transaction should be sent from.
• gasPrice - String (optional): The gas price in wei to use for this transaction.
• gas - Number (optional): The maximum gas provided for this transaction (gas limit).
• value - ‘‘Number|String|BN|BigNumber‘‘(optional): The value transferred for the transaction in
wei.
2. callback - Function (optional): This callback will be fired first with the “transactionHash”, or with an
error object as the first argument.

7.19.2 Returns

The callback will return the 32 bytes transaction hash.

PromiEvent: A promise combined event emitter. Will be resolved when the transaction receipt is available, OR
if this send() is called from a someContract.deploy(), then the promise will resolve with the new contract
instance. Additionally the following events are available:
• "transactionHash" returns String: is fired right after the transaction is sent and a transaction hash is
available.

7.19. methods.myMethod.send 69
web3.js Documentation, Release 1.0.0

• "receipt" returns Object: is fired when the transaction receipt is available. Receipts from contracts will
have no logs property, but instead an events property with event names as keys and events as properties.
See getPastEvents return values for details about the returned event object.
• "confirmation" returns Number, Object: is fired for every confirmation up to the 24th confirmation.
Receives the confirmation number as the first and the receipt as the second argument. Fired from confirmation
1 on, which is the block where it’s minded.
"error" returns Error and Object|undefined: Is fired if an error occurs during sending. If the transaction
was rejected by the network with a receipt, the second parameter will be the receipt.

7.19.3 Example

// using the callback

myContract.methods.myMethod(123).send({from:
˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'}, function(error, transactionHash){

...
});

// using the promise

myContract.methods.myMethod(123).send({from:
˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'})

.then(function(receipt){
// receipt can also be a new contract instance, when coming from a "contract.
˓→deploy({...}).send()"

});

// using the event emitter

myContract.methods.myMethod(123).send({from:
˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'})

.on('transactionHash', function(hash){
...
})
.on('confirmation', function(confirmationNumber, receipt){
...
})
.on('receipt', function(receipt){
// receipt example
console.log(receipt);
> {
"transactionHash":
˓→"0x9fc76417374aa880d4449a1f7f31ec597f00b1f6f3dd2d66f4c9c6c445836d8b",

"transactionIndex": 0,
"blockHash":
˓→"0xef95f2f1ed3ca60b048b4bf67cde2195961e0bba6f70bcbea9a2c4e133e34b46",

"blockNumber": 3,
"contractAddress": "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe",
"cumulativeGasUsed": 314159,
"gasUsed": 30234,
"events": {
"MyEvent": {
returnValues: {
myIndexedParam: 20,
myOtherIndexedParam: '0x123456789...',
myNonIndexParam: 'My String'
},
(continues on next page)

70 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

(continued from previous page)

raw: {
data:
˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',

topics: [
˓→'0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',

˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385']

},
event: 'MyEvent',
signature:
˓→'0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',

logIndex: 0,
transactionIndex: 0,
transactionHash:
˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',

blockHash:
˓→'0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',

blockNumber: 1234,
address: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'
},
"MyOtherEvent": {
...
},
"MyMultipleEvent":[{...}, {...}] // If there are multiple of the same
˓→event, they will be in an array

}
}
})
.on('error', console.error); // If there's an out of gas error the second parameter
˓→is the receipt.

7.20 methods.myMethod.estimateGas

myContract.methods.myMethod([param1[, param2[, ...]]]).estimateGas(options[,

˓→callback])

Will call estimate the gas a method execution will take when executed in the EVM without. The estimation can differ
from the actual gas used when later sending a transaction, as the state of the smart contract can be different at that
time.

7.20.1 Parameters

1. options - Object (optional): The options used for calling.

• from - String (optional): The address the call “transaction” should be made from.
• gas - Number (optional): The maximum gas provided for this call “transaction” (gas limit). Setting
a specific value helps to detect out of gas errors. If all gas is used it will return the same number.
• value - ‘‘Number|String|BN|BigNumber‘‘(optional): The value transferred for the call “transac-
tion” in wei.
2. callback - Function (optional): This callback will be fired with the result of the gas estimation as the
second argument, or with an error object as the first argument.

7.20. methods.myMethod.estimateGas 71
web3.js Documentation, Release 1.0.0

7.20.2 Returns

Promise returns Number: The gas amount estimated.

7.20.3 Example

// using the callback

myContract.methods.myMethod(123).estimateGas({gas: 5000000}, function(error,
˓→gasAmount){

if(gasAmount == 5000000)
console.log('Method ran out of gas');
});

// using the promise

myContract.methods.myMethod(123).estimateGas({from:
˓→'0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'})

.then(function(gasAmount){
...
})
.catch(function(error){
...
});

7.21 methods.myMethod.encodeABI

myContract.methods.myMethod([param1[, param2[, ...]]]).encodeABI()

Encodes the ABI for this method. This can be used to send a transaction, call a method, or pass it into another smart
contracts method as arguments.

7.21.1 Parameters

none

7.21.2 Returns

String: The encoded ABI byte code to send via a transaction or call.

7.21.3 Example

myContract.methods.myMethod(123).encodeABI();
> '0x58cf5f1000000000000000000000000000000000000000000000000000000000000007B'

72 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

7.22 = Events =

7.23 once

myContract.once(event[, options], callback)

Subscribes to an event and unsubscribes immediately after the first event or error. Will only fire for a single event.

7.23.1 Parameters

1. event - String: The name of the event in the contract, or "allEvents" to get all events.
2. options - Object (optional): The options used for deployment.
• filter - Object (optional): Lets you filter events by indexed parameters, e.g. {filter:
{myNumber: [12,13]}} means all events where “myNumber” is 12 or 13.
• topics - Array (optional): This allows you to manually set the topics for the event filter. If given
the filter property and event signature, (topic[0]) will not be set automatically.
3. callback - Function: This callback will be fired for the first event as the second argument, or an error as
the first argument. See getPastEvents return values for details about the event structure.

7.23.2 Returns

undefined

7.23.3 Example

myContract.once('MyEvent', {
filter: {myIndexedParam: [20,23], myOtherIndexedParam: '0x123456789...'}, //
˓→Using an array means OR: e.g. 20 or 23

fromBlock: 0
}, function(error, event){ console.log(event); });

// event output example

> {
returnValues: {
myIndexedParam: 20,
myOtherIndexedParam: '0x123456789...',
myNonIndexParam: 'My String'
},
raw: {
data: '0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',
topics: ['0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7
˓→', '0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385']

},
event: 'MyEvent',
signature: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
logIndex: 0,
transactionIndex: 0,
(continues on next page)

7.22. = Events = 73
web3.js Documentation, Release 1.0.0

(continued from previous page)

transactionHash:
˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',

blockHash: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
blockNumber: 1234,
address: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'
}

7.24 events

myContract.events.MyEvent([options][, callback])

Subscribe to an event

7.24.1 Parameters

1. options - Object (optional): The options used for deployment.

• filter - Object (optional): Let you filter events by indexed parameters, e.g. {filter:
{myNumber: [12,13]}} means all events where “myNumber” is 12 or 13.
• fromBlock - Number (optional): The block number (greater than or equal to) from which to get
events on.
• topics - Array (optional): This allows to manually set the topics for the event filter. If given the
filter property and event signature, (topic[0]) will not be set automatically.
2. callback - Function (optional): This callback will be fired for each event as the second argument, or an
error as the first argument.

7.24.2 Returns

EventEmitter: The event emitter has the following events:

• "data" returns Object: Fires on each incoming event with the event object as argument.
• "changed" returns Object: Fires on each event which was removed from the blockchain. The event will
have the additional property "removed: true".
• "error" returns Object: Fires when an error in the subscription occours.
• "connected" returns String: Fires once after the subscription successfully connected. Returns the sub-
scription id.
The structure of the returned event Object looks as follows:
• event - String: The event name.
• signature - String|Null: The event signature, null if it’s an anonymous event.
• address - String: Address this event originated from.
• returnValues - Object: The return values coming from the event, e.g. {myVar: 1, myVar2:
'0x234...'}.
• logIndex - Number: Integer of the event index position in the block.

74 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

• transactionIndex - Number: Integer of the transaction’s index position the event was created in.
• transactionHash 32 Bytes - String: Hash of the transaction this event was created in.
• blockHash 32 Bytes - String: Hash of the block this event was created in. null when it’s still pending.
• blockNumber - Number: The block number this log was created in. null when still pending.
• raw.data - String: The data containing non-indexed log parameter.
• raw.topics - Array: An array with max 4 32 Byte topics, topic 1-3 contains indexed parameters of the
event.

7.24.3 Example

myContract.events.MyEvent({
filter: {myIndexedParam: [20,23], myOtherIndexedParam: '0x123456789...'}, //
˓→Using an array means OR: e.g. 20 or 23

fromBlock: 0
}, function(error, event){ console.log(event); })
.on("connected", function(subscriptionId){
console.log(subscriptionId);
})
.on('data', function(event){
console.log(event); // same results as the optional callback above
})
.on('changed', function(event){
// remove event from local database
})
.on('error', console.error);

// event output example

> {
returnValues: {
myIndexedParam: 20,
myOtherIndexedParam: '0x123456789...',
myNonIndexParam: 'My String'
},
raw: {
data: '0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',
topics: ['0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7
˓→', '0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385']

},
event: 'MyEvent',
signature: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
logIndex: 0,
transactionIndex: 0,
transactionHash:
˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',

blockHash: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
blockNumber: 1234,
address: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'
}

7.24. events 75
web3.js Documentation, Release 1.0.0

7.25 events.allEvents

myContract.events.allEvents([options][, callback])

Same as events but receives all events from this smart contract. Optionally the filter property can filter those events.

7.26 getPastEvents

myContract.getPastEvents(event[, options][, callback])

Gets past events for this contract.

7.26.1 Parameters

1. event - String: The name of the event in the contract, or "allEvents" to get all events.
2. options - Object (optional): The options used for deployment.
• filter - Object (optional): Lets you filter events by indexed parameters, e.g. {filter:
{myNumber: [12,13]}} means all events where “myNumber” is 12 or 13.
• fromBlock - Number (optional): The block number (greater than or equal to) from which to get
events on.
• toBlock - Number (optional): The block number (less than or equal to) to get events up to (De-
faults to "latest").
• topics - Array (optional): This allows manually setting the topics for the event filter. If given
the filter property and event signature, (topic[0]) will not be set automatically.
3. callback - Function (optional): This callback will be fired with an array of event logs as the second
argument, or an error as the first argument.

7.26.2 Returns

Promise returns Array: An array with the past event Objects, matching the given event name and filter.
For the structure of a returned event Object see getPastEvents return values.

7.26.3 Example

myContract.getPastEvents('MyEvent', {
filter: {myIndexedParam: [20,23], myOtherIndexedParam: '0x123456789...'}, //
˓→Using an array means OR: e.g. 20 or 23

fromBlock: 0,
toBlock: 'latest'
}, function(error, events){ console.log(events); })
.then(function(events){
console.log(events) // same results as the optional callback above
});
(continues on next page)

76 Chapter 7. web3.eth.Contract
 web3.js Documentation, Release 1.0.0

(continued from previous page)

> [{
returnValues: {
myIndexedParam: 20,
myOtherIndexedParam: '0x123456789...',
myNonIndexParam: 'My String'
},
raw: {
data: '0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',
topics: ['0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7
˓→', '0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385']

},
event: 'MyEvent',
signature: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
logIndex: 0,
transactionIndex: 0,
transactionHash:
˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',

blockHash: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
blockNumber: 1234,
address: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'
},{
...
}]

7.26. getPastEvents 77
web3.js Documentation, Release 1.0.0

78 Chapter 7. web3.eth.Contract
 CHAPTER 8

web3.eth.accounts

The web3.eth.accounts contains functions to generate Ethereum accounts and sign transactions and data.

Note: This package has NOT been audited and might potentially be unsafe. Take precautions to clear memory
properly, store the private keys safely, and test transaction receiving and sending functionality properly before using
in production!

To use this package standalone use:

var Accounts = require('web3-eth-accounts');

// Passing in the eth or web3 package is necessary to allow retrieving chainId,

˓→gasPrice and nonce automatically

// for accounts.signTransaction().
var accounts = new Accounts('ws://localhost:8546');

8.1 create

web3.eth.accounts.create([entropy]);

Generates an account object with private key and public key.

8.1.1 Parameters

1. entropy - String (optional): A random string to increase entropy. If given it should be at least 32 characters.
If none is given a random string will be generated using randomhex.

79
web3.js Documentation, Release 1.0.0

8.1.2 Returns

Object - The account object with the following structure:

• address - string: The account address.
• privateKey - string: The accounts private key. This should never be shared or stored unencrypted in
localstorage! Also make sure to null the memory after usage.
• signTransaction(tx [, callback]) - Function: The function to sign transactions. See
web3.eth.accounts.signTransaction() for more.
• sign(data) - Function: The function to sign transactions. See web3.eth.accounts.sign() for more.

8.1.3 Example

web3.eth.accounts.create();
> {
address: "0xb8CE9ab6943e0eCED004cDe8e3bBed6568B2Fa01",
privateKey: "0x348ce564d427a3311b6536bbcff9390d69395b06ed6c486954e971d960fe8709",
signTransaction: function(tx){...},
sign: function(data){...},
encrypt: function(password){...}
}

web3.eth.accounts.create('2435@#@#@±±±±!!!!
˓→678543213456764321§34567543213456785432134567');

> {
address: "0xF2CD2AA0c7926743B1D4310b2BC984a0a453c3d4",
privateKey: "0xd7325de5c2c1cf0009fac77d3d04a9c004b038883446b065871bc3e831dcd098",
signTransaction: function(tx){...},
sign: function(data){...},
encrypt: function(password){...}
}

web3.eth.accounts.create(web3.utils.randomHex(32));
> {
address: "0xe78150FaCD36E8EB00291e251424a0515AA1FF05",
privateKey: "0xcc505ee6067fba3f6fc2050643379e190e087aeffe5d958ab9f2f3ed3800fa4e",
signTransaction: function(tx){...},
sign: function(data){...},
encrypt: function(password){...}
}

8.2 privateKeyToAccount

web3.eth.accounts.privateKeyToAccount(privateKey);

Creates an account object from a private key.

8.2.1 Parameters

1. privateKey - String: The private key to convert.

80 Chapter 8. web3.eth.accounts
 web3.js Documentation, Release 1.0.0

8.2.2 Returns

Object - The account object with the structure seen here.

8.2.3 Example

web3.eth.accounts.privateKeyToAccount(
˓→'0x348ce564d427a3311b6536bbcff9390d69395b06ed6c486954e971d960fe8709');

> {
address: '0xb8CE9ab6943e0eCED004cDe8e3bBed6568B2Fa01',
privateKey: '0x348ce564d427a3311b6536bbcff9390d69395b06ed6c486954e971d960fe8709',
signTransaction: function(tx){...},
sign: function(data){...},
encrypt: function(password){...}
}

8.3 signTransaction

web3.eth.accounts.signTransaction(tx, privateKey [, callback]);

Signs an Ethereum transaction with a given private key.

8.3.1 Parameters

1. tx - Object: The transaction object as follows:

• nonce - String: (optional) The nonce to use when signing this transaction. Default will use
web3.eth.getTransactionCount().
• chainId - String: (optional) The chain id to use when signing this transaction. Default will use
web3.eth.net.getId().
• to - String: (optional) The recevier of the transaction, can be empty when deploying a contract.
• data - String: (optional) The call data of the transaction, can be empty for simple value transfers.
• value - String: (optional) The value of the transaction in wei.
• gasPrice - String: (optional) The gas price set by this transaction, if empty, it will use
web3.eth.gasPrice()
• gas - String: The gas provided by the transaction.
• chain - String: (optional) Defaults to mainnet.
• hardfork - String: (optional) Defaults to petersburg.
• common - Object: (optional) The common object
– customChain - Object: The custom chain properties

* name - string: (optional) The name of the chain

* networkId - number: Network ID of the custom chain
* chainId - number: Chain ID of the custom chain

8.3. signTransaction 81
web3.js Documentation, Release 1.0.0

– baseChain - string: (optional) mainnet, goerli, kovan, rinkeby, or

ropsten
– hardfork - string: (optional) chainstart, homestead, dao,
tangerineWhistle, spuriousDragon, byzantium, constantinople,
petersburg, or istanbul
2. privateKey - String: The private key to sign with.
3. callback - Function: (optional) Optional callback, returns an error object as first parameter and the result
as second.

8.3.2 Returns

Promise returning Object: The signed data RLP encoded transaction, or if returnSignature is true the signature value

• messageHash - String: The hash of the given message.

• r - String: First 32 bytes of the signature
• s - String: Next 32 bytes of the signature
• v - String: Recovery value + 27
• rawTransaction - String: The RLP encoded transaction, ready to be send using
web3.eth.sendSignedTransaction.
• transactionHash - String: The transaction hash for the RLP encoded transaction.

8.3.3 Example

web3.eth.accounts.signTransaction({
to: '0xF0109fC8DF283027b6285cc889F5aA624EaC1F55',
value: '1000000000',
gas: 2000000
}, '0x4c0883a69102937d6231471b5dbb6204fe5129617082792ae468d01a3f362318')
.then(console.log);
> {
messageHash: '0x31c2f03766b36f0346a850e78d4f7db2d9f4d7d54d5f272a750ba44271e370b1',
v: '0x25',
r: '0xc9cf86333bcb065d140032ecaab5d9281bde80f21b9687b3e94161de42d51895',
s: '0x727a108a0b8d101465414033c3f705a9c7b826e596766046ee1183dbc8aeaa68',
rawTransaction:
˓→'0xf869808504e3b29200831e848094f0109fc8df283027b6285cc889f5aa624eac1f55843b9aca008025a0c9cf86333bcb

˓→'

transactionHash:
˓→'0xde8db924885b0803d2edc335f745b2b8750c8848744905684c20b987443a9593'

web3.eth.accounts.signTransaction({
to: '0xF0109fC8DF283027b6285cc889F5aA624EaC1F55',
value: '1000000000',
gas: 2000000,
gasPrice: '234567897654321',
nonce: 0,
chainId: 1
}, '0x4c0883a69102937d6231471b5dbb6204fe5129617082792ae468d01a3f362318')
(continues on next page)

82 Chapter 8. web3.eth.accounts
 web3.js Documentation, Release 1.0.0

(continued from previous page)

.then(console.log);
> {
messageHash: '0x6893a6ee8df79b0f5d64a180cd1ef35d030f3e296a5361cf04d02ce720d32ec5',
r: '0x9ebb6ca057a0535d6186462bc0b465b561c94a295bdb0621fc19208ab149a9c',
s: '0x440ffd775ce91a833ab410777204d5341a6f9fa91216a6f3ee2c051fea6a0428',
v: '0x25',
rawTransaction:
˓→'0xf86a8086d55698372431831e848094f0109fc8df283027b6285cc889f5aa624eac1f55843b9aca008025a009ebb6ca05

˓→'

transactionHash:
˓→'0xd8f64a42b57be0d565f385378db2f6bf324ce14a594afc05de90436e9ce01f60'

// or with a common
web3.eth.accounts.signTransaction({
to: '0xF0109fC8DF283027b6285cc889F5aA624EaC1F55',
value: '1000000000',
gas: 2000000
common: {
baseChain: 'mainnet',
hardfork: 'petersburg',
customChain: {
name: 'custom-chain',
chainId: 1,
networkId: 1
}
}
}, '0x4c0883a69102937d6231471b5dbb6204fe5129617082792ae468d01a3f362318')
.then(console.log);

8.4 recoverTransaction

web3.eth.accounts.recoverTransaction(rawTransaction);

Recovers the Ethereum address which was used to sign the given RLP encoded transaction.

8.4.1 Parameters

1. signature - String: The RLP encoded transaction.

8.4.2 Returns

String: The Ethereum address used to sign this transaction.

8.4.3 Example

8.4. recoverTransaction 83
web3.js Documentation, Release 1.0.0

web3.eth.accounts.recoverTransaction(
˓→'0xf86180808401ef364594f0109fc8df283027b6285cc889f5aa624eac1f5580801ca031573280d608f75137e33fc14655

˓→');

> "0xF0109fC8DF283027b6285cc889F5aA624EaC1F55"

8.5 hashMessage

web3.eth.accounts.hashMessage(message);

Hashes the given message to be passed web3.eth.accounts.recover() function. The data will be UTF-8 HEX decoded
and enveloped as follows: "\x19Ethereum Signed Message:\n" + message.length + message
and hashed using keccak256.

8.5.1 Parameters

1. message - String: A message to hash, if its HEX it will be UTF8 decoded before.

8.5.2 Returns

String: The hashed message

8.5.3 Example

web3.eth.accounts.hashMessage("Hello World")
> "0xa1de988600a42c4b4ab089b619297c17d53cffae5d5120d82d8a92d0bb3b78f2"

// the below results in the same hash

web3.eth.accounts.hashMessage(web3.utils.utf8ToHex("Hello World"))
> "0xa1de988600a42c4b4ab089b619297c17d53cffae5d5120d82d8a92d0bb3b78f2"

8.6 sign

web3.eth.accounts.sign(data, privateKey);

Signs arbitrary data. This data is before UTF-8 HEX decoded and enveloped as follows: "\x19Ethereum Signed
Message:\n" + message.length + message.

8.6.1 Parameters

1. data - String: The data to sign. If its a string it will be

2. privateKey - String: The private key to sign with.

84 Chapter 8. web3.eth.accounts
 web3.js Documentation, Release 1.0.0

8.6.2 Returns

String|Object: The signed data RLP encoded signature, or if returnSignature is true the signature values as follows:

• message - String: The the given message.

• messageHash - String: The hash of the given message.
• r - String: First 32 bytes of the signature
• s - String: Next 32 bytes of the signature
• v - String: Recovery value + 27

8.6.3 Example

web3.eth.accounts.sign('Some data',
˓→'0x4c0883a69102937d6231471b5dbb6204fe5129617082792ae468d01a3f362318');

> {
message: 'Some data',
messageHash: '0x1da44b586eb0729ff70a73c326926f6ed5a25f5b056e7f47fbc6e58d86871655',
v: '0x1c',
r: '0xb91467e570a6466aa9e9876cbcd013baba02900b8979d43fe208a4a4f339f5fd',
s: '0x6007e74cd82e037b800186422fc2da167c747ef045e5d18a5f5d4300f8e1a029',
signature:
˓→'0xb91467e570a6466aa9e9876cbcd013baba02900b8979d43fe208a4a4f339f5fd6007e74cd82e037b800186422fc2da16

˓→'

8.7 recover

web3.eth.accounts.recover(signatureObject);
web3.eth.accounts.recover(message, signature [, preFixed]);
web3.eth.accounts.recover(message, v, r, s [, preFixed]);

Recovers the Ethereum address which was used to sign the given data.

8.7.1 Parameters

1. message|signatureObject - String|Object: Either signed message or hash, or the signature object as following v

• messageHash - String: The hash of the given message already prefixed with
"\x19Ethereum Signed Message:\n" + message.length + message.
• r - String: First 32 bytes of the signature
• s - String: Next 32 bytes of the signature
• v - String: Recovery value + 27
2. signature - String: The raw RLP encoded signature, OR parameter 2-4 as v, r, s values.

8.7. recover 85
web3.js Documentation, Release 1.0.0

3. preFixed - Boolean (optional, default: false): If the last parameter is true, the given message will
NOT automatically be prefixed with "\x19Ethereum Signed Message:\n" + message.length
+ message, and assumed to be already prefixed.

8.7.2 Returns

String: The Ethereum address used to sign this data.

8.7.3 Example

web3.eth.accounts.recover({
messageHash: '0x1da44b586eb0729ff70a73c326926f6ed5a25f5b056e7f47fbc6e58d86871655',
v: '0x1c',
r: '0xb91467e570a6466aa9e9876cbcd013baba02900b8979d43fe208a4a4f339f5fd',
s: '0x6007e74cd82e037b800186422fc2da167c747ef045e5d18a5f5d4300f8e1a029'
})
> "0x2c7536E3605D9C16a7a3D7b1898e529396a65c23"

// message, signature
web3.eth.accounts.recover('Some data',
˓→'0xb91467e570a6466aa9e9876cbcd013baba02900b8979d43fe208a4a4f339f5fd6007e74cd82e037b800186422fc2da16

˓→');

> "0x2c7536E3605D9C16a7a3D7b1898e529396a65c23"

// message, v, r, s
web3.eth.accounts.recover('Some data', '0x1c',
˓→'0xb91467e570a6466aa9e9876cbcd013baba02900b8979d43fe208a4a4f339f5fd',

˓→'0x6007e74cd82e037b800186422fc2da167c747ef045e5d18a5f5d4300f8e1a029');

> "0x2c7536E3605D9C16a7a3D7b1898e529396a65c23"

8.8 encrypt

web3.eth.accounts.encrypt(privateKey, password);

Encrypts a private key to the web3 keystore v3 standard.

8.8.1 Parameters

1. privateKey - String: The private key to encrypt.

2. password - String: The password used for encryption.

8.8.2 Returns

Object: The encrypted keystore v3 JSON.

86 Chapter 8. web3.eth.accounts
 web3.js Documentation, Release 1.0.0

8.8.3 Example

web3.eth.accounts.encrypt(
˓→'0x4c0883a69102937d6231471b5dbb6204fe5129617082792ae468d01a3f362318', 'test!')

> {
version: 3,
id: '04e9bcbb-96fa-497b-94d1-14df4cd20af6',
address: '2c7536e3605d9c16a7a3d7b1898e529396a65c23',
crypto: {
ciphertext: 'a1c25da3ecde4e6a24f3697251dd15d6208520efc84ad97397e906e6df24d251
˓→',

cipherparams: { iv: '2885df2b63f7ef247d753c82fa20038a' },

cipher: 'aes-128-ctr',
kdf: 'scrypt',
kdfparams: {
dklen: 32,
salt: '4531b3c174cc3ff32a6a7a85d6761b410db674807b2d216d022318ceee50be10',
n: 262144,
r: 8,
p: 1
},
mac: 'b8b010fff37f9ae5559a352a185e86f9b9c1d7f7a9f1bd4e82a5dd35468fc7f6'
}
}

8.9 decrypt

web3.eth.accounts.decrypt(keystoreJsonV3, password);

Decrypts a keystore v3 JSON, and creates the account.

8.9.1 Parameters

1. encryptedPrivateKey - String: The encrypted private key to decrypt.

2. password - String: The password used for encryption.

8.9.2 Returns

Object: The decrypted account.

8.9.3 Example

web3.eth.accounts.decrypt({
version: 3,
id: '04e9bcbb-96fa-497b-94d1-14df4cd20af6',
address: '2c7536e3605d9c16a7a3d7b1898e529396a65c23',
crypto: {
ciphertext: 'a1c25da3ecde4e6a24f3697251dd15d6208520efc84ad97397e906e6df24d251
˓→',

(continues on next page)

8.9. decrypt 87
web3.js Documentation, Release 1.0.0

(continued from previous page)

cipherparams: { iv: '2885df2b63f7ef247d753c82fa20038a' },
cipher: 'aes-128-ctr',
kdf: 'scrypt',
kdfparams: {
dklen: 32,
salt: '4531b3c174cc3ff32a6a7a85d6761b410db674807b2d216d022318ceee50be10',
n: 262144,
r: 8,
p: 1
},
mac: 'b8b010fff37f9ae5559a352a185e86f9b9c1d7f7a9f1bd4e82a5dd35468fc7f6'
}
}, 'test!');
> {
address: "0x2c7536E3605D9C16a7a3D7b1898e529396a65c23",
privateKey: "0x4c0883a69102937d6231471b5dbb6204fe5129617082792ae468d01a3f362318",
signTransaction: function(tx){...},
sign: function(data){...},
encrypt: function(password){...}
}

8.10 wallet

web3.eth.accounts.wallet;

Contains an in memory wallet with multiple accounts. These accounts can be used when using
web3.eth.sendTransaction().

8.10.1 Example

web3.eth.accounts.wallet;
> Wallet {
0: {...}, // account by index
"0xF0109fC8DF283027b6285cc889F5aA624EaC1F55": {...}, // same account by address
"0xf0109fc8df283027b6285cc889f5aa624eac1f55": {...}, // same account by address
˓→lowercase

1: {...},
"0xD0122fC8DF283027b6285cc889F5aA624EaC1d23": {...},
"0xd0122fc8df283027b6285cc889f5aa624eac1d23": {...},

add: function(){},
remove: function(){},
save: function(){},
load: function(){},
clear: function(){},

length: 2,
}

88 Chapter 8. web3.eth.accounts
 web3.js Documentation, Release 1.0.0

8.11 wallet.create

web3.eth.accounts.wallet.create(numberOfAccounts [, entropy]);

Generates one or more accounts in the wallet. If wallets already exist they will not be overridden.

8.11.1 Parameters

1. numberOfAccounts - Number: Number of accounts to create. Leave empty to create an empty wallet.
2. entropy - String (optional): A string with random characters as additional entropy when generating ac-
counts. If given it should be at least 32 characters.

8.11.2 Returns

Object: The wallet object.

8.11.3 Example

web3.eth.accounts.wallet.create(2, '54674321§3456764321§345674321§3453647544±±±§±±±!
˓→!!43534534534534');

> Wallet {
0: {...},
"0xF0109fC8DF283027b6285cc889F5aA624EaC1F55": {...},
"0xf0109fc8df283027b6285cc889f5aa624eac1f55": {...},
...
}

8.12 wallet.add

web3.eth.accounts.wallet.add(account);

Adds an account using a private key or account object to the wallet.

8.12.1 Parameters

1. account - String|Object: A private key or account object created with web3.eth.accounts.create().

8.12.2 Returns

Object: The added account.

8.12.3 Example

8.11. wallet.create 89
web3.js Documentation, Release 1.0.0

web3.eth.accounts.wallet.add(
˓→'0x4c0883a69102937d6231471b5dbb6204fe5129617082792ae468d01a3f362318');

> {
index: 0,
address: '0x2c7536E3605D9C16a7a3D7b1898e529396a65c23',
privateKey: '0x4c0883a69102937d6231471b5dbb6204fe5129617082792ae468d01a3f362318',
signTransaction: function(tx){...},
sign: function(data){...},
encrypt: function(password){...}
}

web3.eth.accounts.wallet.add({
privateKey: '0x348ce564d427a3311b6536bbcff9390d69395b06ed6c486954e971d960fe8709',
address: '0xb8CE9ab6943e0eCED004cDe8e3bBed6568B2Fa01'
});
> {
index: 0,
address: '0xb8CE9ab6943e0eCED004cDe8e3bBed6568B2Fa01',
privateKey: '0x348ce564d427a3311b6536bbcff9390d69395b06ed6c486954e971d960fe8709',
signTransaction: function(tx){...},
sign: function(data){...},
encrypt: function(password){...}
}

8.13 wallet.remove

web3.eth.accounts.wallet.remove(account);

Removes an account from the wallet.

8.13.1 Parameters

1. account - String|Number: The account address, or index in the wallet.

8.13.2 Returns

Boolean: true if the wallet was removed. false if it couldn’t be found.

8.13.3 Example

web3.eth.accounts.wallet;
> Wallet {
0: {...},
"0xF0109fC8DF283027b6285cc889F5aA624EaC1F55": {...}
1: {...},
"0xb8CE9ab6943e0eCED004cDe8e3bBed6568B2Fa01": {...}
...
}

(continues on next page)

90 Chapter 8. web3.eth.accounts
 web3.js Documentation, Release 1.0.0

(continued from previous page)

web3.eth.accounts.wallet.remove('0xF0109fC8DF283027b6285cc889F5aA624EaC1F55');
> true

web3.eth.accounts.wallet.remove(3);
> false

8.14 wallet.clear

web3.eth.accounts.wallet.clear();

Securely empties the wallet and removes all its accounts.

8.14.1 Parameters

none

8.14.2 Returns

Object: The wallet object.

8.14.3 Example

web3.eth.accounts.wallet.clear();
> Wallet {
add: function(){},
remove: function(){},
save: function(){},
load: function(){},
clear: function(){},

length: 0
}

8.15 wallet.encrypt

web3.eth.accounts.wallet.encrypt(password);

Encrypts all wallet accounts to an array of encrypted keystore v3 objects.

8.15.1 Parameters

1. password - String: The password which will be used for encryption.

8.14. wallet.clear 91
web3.js Documentation, Release 1.0.0

8.15.2 Returns

Array: The encrypted keystore v3.

8.15.3 Example

web3.eth.accounts.wallet.encrypt('test');
> [ { version: 3,
id: 'dcf8ab05-a314-4e37-b972-bf9b86f91372',
address: '06f702337909c06c82b09b7a22f0a2f0855d1f68',
crypto:
{ ciphertext: '0de804dc63940820f6b3334e5a4bfc8214e27fb30bb7e9b7b74b25cd7eb5c604',
cipherparams: [Object],
cipher: 'aes-128-ctr',
kdf: 'scrypt',
kdfparams: [Object],
mac: 'b2aac1485bd6ee1928665642bf8eae9ddfbc039c3a673658933d320bac6952e3' } },
{ version: 3,
id: '9e1c7d24-b919-4428-b10e-0f3ef79f7cf0',
address: 'b5d89661b59a9af0b34f58d19138baa2de48baaf',
crypto:
{ ciphertext: 'd705ebed2a136d9e4db7e5ae70ed1f69d6a57370d5fbe06281eb07615f404410',
cipherparams: [Object],
cipher: 'aes-128-ctr',
kdf: 'scrypt',
kdfparams: [Object],
mac: 'af9eca5eb01b0f70e909f824f0e7cdb90c350a802f04a9f6afe056602b92272b' } }
]

8.16 wallet.decrypt

web3.eth.accounts.wallet.decrypt(keystoreArray, password);

Decrypts keystore v3 objects.

8.16.1 Parameters

1. keystoreArray - Array: The encrypted keystore v3 objects to decrypt.

2. password - String: The password which will be used for encryption.

8.16.2 Returns

Object: The wallet object.

8.16.3 Example

92 Chapter 8. web3.eth.accounts
 web3.js Documentation, Release 1.0.0

web3.eth.accounts.wallet.decrypt([
{ version: 3,
id: '83191a81-aaca-451f-b63d-0c5f3b849289',
address: '06f702337909c06c82b09b7a22f0a2f0855d1f68',
crypto:
{ ciphertext: '7d34deae112841fba86e3e6cf08f5398dda323a8e4d29332621534e2c4069e8d',
cipherparams: { iv: '497f4d26997a84d570778eae874b2333' },
cipher: 'aes-128-ctr',
kdf: 'scrypt',
kdfparams:
{ dklen: 32,
salt: '208dd732a27aa4803bb760228dff18515d5313fd085bbce60594a3919ae2d88d',
n: 262144,
r: 8,
p: 1 },
mac: '0062a853de302513c57bfe3108ab493733034bf3cb313326f42cf26ea2619cf9' } },
{ version: 3,
id: '7d6b91fa-3611-407b-b16b-396efb28f97e',
address: 'b5d89661b59a9af0b34f58d19138baa2de48baaf',
crypto:
{ ciphertext: 'cb9712d1982ff89f571fa5dbef447f14b7e5f142232bd2a913aac833730eeb43',
cipherparams: { iv: '8cccb91cb84e435437f7282ec2ffd2db' },
cipher: 'aes-128-ctr',
kdf: 'scrypt',
kdfparams:
{ dklen: 32,
salt: '08ba6736363c5586434cd5b895e6fe41ea7db4785bd9b901dedce77a1514e8b8',
n: 262144,
r: 8,
p: 1 },
mac: 'd2eb068b37e2df55f56fa97a2bf4f55e072bef0dd703bfd917717d9dc54510f0' } }
], 'test');
> Wallet {
0: {...},
1: {...},
"0xF0109fC8DF283027b6285cc889F5aA624EaC1F55": {...},
"0xD0122fC8DF283027b6285cc889F5aA624EaC1d23": {...}
...
}

8.17 wallet.save

web3.eth.accounts.wallet.save(password [, keyName]);

Stores the wallet encrypted and as string in local storage.

Note: Browser only.

8.17.1 Parameters

1. password - String: The password to encrypt the wallet.

8.17. wallet.save 93
web3.js Documentation, Release 1.0.0

2. keyName - String: (optional) The key used for the local storage position, defaults to "web3js_wallet".

8.17.2 Returns

Boolean

8.17.3 Example

web3.eth.accounts.wallet.save('test#!$');
> true

8.18 wallet.load

web3.eth.accounts.wallet.load(password [, keyName]);

Loads a wallet from local storage and decrypts it.

Note: Browser only.

8.18.1 Parameters

1. password - String: The password to decrypt the wallet.

2. keyName - String: (optional) The key used for the localstorage position, defaults to "web3js_wallet".

8.18.2 Returns

Object: The wallet object.

8.18.3 Example

web3.eth.accounts.wallet.load('test#!$', 'myWalletKey');
> Wallet {
0: {...},
1: {...},
"0xF0109fC8DF283027b6285cc889F5aA624EaC1F55": {...},
"0xD0122fC8DF283027b6285cc889F5aA624EaC1d23": {...}
...
}

94 Chapter 8. web3.eth.accounts
 CHAPTER 9

web3.eth.personal

The web3-eth-personal package allows you to interact with the Ethereum node’s accounts.

Note: Many of these functions send sensitive information, like password. Never call these functions over a unsecured
Websocket or HTTP provider, as your password will be sent in plain text!

var Personal = require('web3-eth-personal');

// "Personal.providers.givenProvider" will be set if in an Ethereum supported browser.

var personal = new Personal(Personal.givenProvider || 'ws://some.local-or-remote.
˓→node:8546');

// or using the web3 umbrella package

var Web3 = require('web3');

var web3 = new Web3(Web3.givenProvider || 'ws://some.local-or-remote.node:8546');

// -> web3.eth.personal

9.1 setProvider

web3.setProvider(myProvider)
web3.eth.setProvider(myProvider)
web3.shh.setProvider(myProvider)
web3.bzz.setProvider(myProvider)
...

Will change the provider for its module.

95
web3.js Documentation, Release 1.0.0

Note: When called on the umbrella package web3 it will also set the provider for all sub modules web3.eth,
web3.shh, etc EXCEPT web3.bzz which needs a separate provider at all times.

9.1.1 Parameters

1. Object - myProvider: a valid provider.

9.1.2 Returns

Boolean

9.1.3 Example

var Web3 = require('web3');

var web3 = new Web3('http://localhost:8545');
// or
var web3 = new Web3(new Web3.providers.HttpProvider('http://localhost:8545'));

// change provider
web3.setProvider('ws://localhost:8546');
// or
web3.setProvider(new Web3.providers.WebsocketProvider('ws://localhost:8546'));

// Using the IPC provider in node.js

var net = require('net');
var web3 = new Web3('/Users/myuser/Library/Ethereum/geth.ipc', net); // mac os path
// or
var web3 = new Web3(new Web3.providers.IpcProvider('/Users/myuser/Library/Ethereum/
˓→geth.ipc', net)); // mac os path

// on windows the path is: "\\\\.\\pipe\\geth.ipc"

// on linux the path is: "/users/myuser/.ethereum/geth.ipc"

9.2 providers

web3.providers
web3.eth.providers
web3.shh.providers
web3.bzz.providers
...

Contains the current available providers.

9.2.1 Value

Object with the following providers:

• Object - HttpProvider: The HTTP provider is deprecated, as it won’t work for subscriptions.

96 Chapter 9. web3.eth.personal
 web3.js Documentation, Release 1.0.0

• Object - WebsocketProvider: The Websocket provider is the standard for usage in legacy browsers.
• Object - IpcProvider: The IPC provider is used node.js dapps when running a local node. Gives the most
secure connection.

9.2.2 Example

var Web3 = require('web3');

// use the given Provider, e.g in Mist, or instantiate a new websocket provider
var web3 = new Web3(Web3.givenProvider || 'ws://remotenode.com:8546');
// or
var web3 = new Web3(Web3.givenProvider || new Web3.providers.WebsocketProvider('ws://
˓→remotenode.com:8546'));

// Using the IPC provider in node.js

var net = require('net');

var web3 = new Web3('/Users/myuser/Library/Ethereum/geth.ipc', net); // mac os path

// or
var web3 = new Web3(new Web3.providers.IpcProvider('/Users/myuser/Library/Ethereum/
˓→geth.ipc', net)); // mac os path

// on windows the path is: "\\\\.\\pipe\\geth.ipc"

// on linux the path is: "/users/myuser/.ethereum/geth.ipc"

9.3 givenProvider

web3.givenProvider
web3.eth.givenProvider
web3.shh.givenProvider
web3.bzz.givenProvider
...

When using web3.js in an Ethereum compatible browser, it will set with the current native provider by that browser.
Will return the given provider by the (browser) environment, otherwise null.

9.3.1 Returns

Object: The given provider set or null;

9.3.2 Example

9.4 currentProvider

web3.currentProvider
web3.eth.currentProvider
web3.shh.currentProvider
web3.bzz.currentProvider
...

9.3. givenProvider 97
web3.js Documentation, Release 1.0.0

Will return the current provider, otherwise null.

9.4.1 Returns

Object: The current provider set or null;

9.4.2 Example

9.5 BatchRequest

new web3.BatchRequest()
new web3.eth.BatchRequest()
new web3.shh.BatchRequest()
new web3.bzz.BatchRequest()

Class to create and execute batch requests.

9.5.1 Parameters

none

9.5.2 Returns

Object: With the following methods:

• add(request): To add a request object to the batch call.
• execute(): Will execute the batch request.

9.5.3 Example

var contract = new web3.eth.Contract(abi, address);

var batch = new web3.BatchRequest();

batch.add(web3.eth.getBalance.request('0x0000000000000000000000000000000000000000',
˓→'latest', callback));

batch.add(contract.methods.balance(address).call.request({from:
˓→'0x0000000000000000000000000000000000000000'}, callback2));

batch.execute();

9.6 extend

98 Chapter 9. web3.eth.personal
 web3.js Documentation, Release 1.0.0

web3.extend(methods)
web3.eth.extend(methods)
web3.shh.extend(methods)
web3.bzz.extend(methods)
...

Allows extending the web3 modules.

Note: You also have *.extend.formatters as additional formatter functions to be used for in and output
formatting. Please see the source file for function details.

9.6.1 Parameters

1. methods - Object: Extension object with array of methods description objects as follows:
• property - String: (optional) The name of the property to add to the module. If no property is
set it will be added to the module directly.
• methods - Array: The array of method descriptions:
– name - String: Name of the method to add.
– call - String: The RPC method name.
– params - Number: (optional) The number of parameters for that function. Default 0.
– inputFormatter - Array: (optional) Array of inputformatter functions. Each array
item responds to a function parameter, so if you want some parameters not to be formatted,
add a null instead.
– outputFormatter - ``Function: (optional) Can be used to format the output of
the method.

9.6.2 Returns

Object: The extended module.

9.6.3 Example

web3.extend({
property: 'myModule',
methods: [{
name: 'getBalance',
call: 'eth_getBalance',
params: 2,
inputFormatter: [web3.extend.formatters.inputAddressFormatter, web3.extend.
˓→formatters.inputDefaultBlockNumberFormatter],

outputFormatter: web3.utils.hexToNumberString
},{
name: 'getGasPriceSuperFunction',
call: 'eth_gasPriceSuper',
params: 2,
inputFormatter: [null, web3.utils.numberToHex]
(continues on next page)

9.6. extend 99
web3.js Documentation, Release 1.0.0

(continued from previous page)

}]
});

web3.extend({
methods: [{
name: 'directCall',
call: 'eth_callForFun',
}]
});

console.log(web3);
> Web3 {
myModule: {
getBalance: function(){},
getGasPriceSuperFunction: function(){}
},
directCall: function(){},
eth: Eth {...},
bzz: Bzz {...},
...
}

9.7 newAccount

web3.eth.personal.newAccount(password, [callback])

Creates a new account.

Note: Never call this function over a unsecured Websocket or HTTP provider, as your password will be send in plain
text!

9.7.1 Parameters

1. password - String: The password to encrypt this account with.

9.7.2 Returns

Promise returns String: The address of the newly created account.

9.7.3 Example

web3.eth.personal.newAccount('!@superpassword')
.then(console.log);
> '0x1234567891011121314151617181920212223456'

100 Chapter 9. web3.eth.personal

 web3.js Documentation, Release 1.0.0

9.8 sign

web3.eth.personal.sign(dataToSign, address, password [, callback])

The sign method calculates an Ethereum specific signature with:

sign(keccak256("\x19Ethereum Signed Message:\n" + dataToSign.length + dataToSign)))

Adding a prefix to the message makes the calculated signature recognisable as an Ethereum specific signature.
If you have the original message and the signed message, you can discover the signing account address using
web3.eth.personal.ecRecover (See example below)

Note: Sending your account password over an unsecured HTTP RPC connection is highly unsecure.

9.8.1 Parameters

1. String - Data to sign. If String it will be converted using web3.utils.utf8ToHex.

2. String - Address to sign data with.
3. String - The password of the account to sign data with.
4. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

9.8.2 Returns

Promise returns String - The signature.

9.8.3 Example

web3.eth.personal.sign("Hello world", "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe",

˓→"test password!")

.then(console.log);
>
˓→"0x30755ed65396facf86c53e6217c52b4daebe72aa4941d89635409de4c9c7f9466d4e9aaec7977f05e923889b33c0d0dd

˓→"

// the below is the same

web3.eth.personal.sign(web3.utils.utf8ToHex("Hello world"),
˓→"0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe", "test password!")

.then(console.log);
>
˓→"0x30755ed65396facf86c53e6217c52b4daebe72aa4941d89635409de4c9c7f9466d4e9aaec7977f05e923889b33c0d0dd

˓→"

// recover the signing account address using original message and signed message
web3.eth.personal.ecRecover("Hello world", "0x30755ed65396...etc...")
.then(console.log);
> "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe"

9.8. sign 101

web3.js Documentation, Release 1.0.0

9.9 ecRecover

web3.eth.personal.ecRecover(dataThatWasSigned, signature [, callback])

Recovers the account that signed the data.

9.9.1 Parameters

1. String - Data that was signed. If String it will be converted using web3.utils.utf8ToHex.
2. String - The signature.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

9.9.2 Returns

Promise returns String - The account.

9.9.3 Example

web3.eth.personal.ecRecover("Hello world",
˓→"0x30755ed65396facf86c53e6217c52b4daebe72aa4941d89635409de4c9c7f9466d4e9aaec7977f05e923889b33c0d0dd

˓→").then(console.log);

> "0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe"

9.10 signTransaction

web3.eth.personal.signTransaction(transaction, password [, callback])

Signs a transaction. This account needs to be unlocked.

Note: Sending your account password over an unsecured HTTP RPC connection is highly unsecure.

9.10.1 Parameters

1. Object - The transaction data to sign web3.eth.sendTransaction() for more.

2. String - The password of the from account, to sign the transaction with.
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

9.10.2 Returns

Promise returns Object - The RLP encoded transaction. The raw property can be used to send the transaction
using web3.eth.sendSignedTransaction.

102 Chapter 9. web3.eth.personal

 web3.js Documentation, Release 1.0.0

9.10.3 Example

web3.eth.signTransaction({
from: "0xEB014f8c8B418Db6b45774c326A0E64C78914dC0",
gasPrice: "20000000000",
gas: "21000",
to: '0x3535353535353535353535353535353535353535',
value: "1000000000000000000",
data: ""
}, 'MyPassword!').then(console.log);
> {
raw:
˓→'0xf86c808504a817c800825208943535353535353535353535353535353535353535880de0b6b3a76400008025a04f4c17

˓→',

tx: {
nonce: '0x0',
gasPrice: '0x4a817c800',
gas: '0x5208',
to: '0x3535353535353535353535353535353535353535',
value: '0xde0b6b3a7640000',
input: '0x',
v: '0x25',
r: '0x4f4c17305743700648bc4f6cd3038ec6f6af0df73e31757007b7f59df7bee88d',
s: '0x7e1941b264348e80c78c4027afc65a87b0a5e43e86742b8ca0823584c6788fd0',
hash: '0xda3be87732110de6c1354c83770aae630ede9ac308d9f7b399ecfba23d923384'
}
}

9.11 sendTransaction

web3.eth.personal.sendTransaction(transactionOptions, password [, callback])

This method sends a transaction over the management API.

Note: Sending your account password over an unsecured HTTP RPC connection is highly unsecure.

9.11.1 Parameters

1. Object - The transaction options

2. String - The passphrase for the current account
3. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

9.11.2 Returns

Promise<string> - The transaction hash.

9.11. sendTransaction 103

web3.js Documentation, Release 1.0.0

9.11.3 Example

web3.eth.sendTransaction({
from: "0xEB014f8c8B418Db6b45774c326A0E64C78914dC0",
gasPrice: "20000000000",
gas: "21000",
to: '0x3535353535353535353535353535353535353535',
value: "1000000000000000000",
data: ""
}, 'MyPassword!').then(console.log);
> '0xda3be87732110de6c1354c83770aae630ede9ac308d9f7b399ecfba23d923384'

9.12 unlockAccount

web3.eth.personal.unlockAccount(address, password, unlockDuraction [, callback])

Signs data using a specific account.

Note: Sending your account password over an unsecured HTTP RPC connection is highly unsecure.

9.12.1 Parameters

1. address - String: The account address.

2. password - String - The password of the account.
3. unlockDuration - Number - The duration for the account to remain unlocked.

9.12.2 Example

web3.eth.personal.unlockAccount("0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe", "test
˓→password!", 600)

.then(console.log('Account unlocked!'));
> "Account unlocked!"

9.13 lockAccount

web3.eth.personal.lockAccount(address [, callback])

Locks the given account.

Note: Sending your account password over an unsecured HTTP RPC connection is highly unsecure.

104 Chapter 9. web3.eth.personal

 web3.js Documentation, Release 1.0.0

9.13.1 Parameters

1. address - String: The account address. 4. Function - (optional) Optional callback, returns an error object
as first parameter and the result as second.

9.13.2 Returns

Promise<boolean>

9.13.3 Example

web3.eth.personal.lockAccount("0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe")
.then(console.log('Account locked!'));
> "Account locked!"

9.14 getAccounts

web3.eth.personal.getAccounts([callback])

Returns a list of accounts the node controls by using the provider and calling the RPC method
personal_listAccounts. Using web3.eth.accounts.create() will not add accounts into this list. For that use
web3.eth.personal.newAccount().
The results are the same as web3.eth.getAccounts() except that calls the RPC method eth_accounts.

9.14.1 Returns

Promise<Array> - An array of addresses controlled by node.

9.14.2 Example

web3.eth.personal.getAccounts()
.then(console.log);
> ["0x11f4d0A3c12e86B4b5F39B213F7E19D048276DAe",
˓→"0xDCc6960376d6C6dEa93647383FfB245CfCed97Cf"]

9.15 importRawKey

web3.eth.personal.importRawKey(privateKey, password)

9.14. getAccounts 105

web3.js Documentation, Release 1.0.0

Imports the given private key into the key store, encrypting it with the passphrase.
Returns the address of the new account.

Note: Sending your account password over an unsecured HTTP RPC connection is highly unsecure.

9.15.1 Parameters

1. privateKey - String - An unencrypted private key (hex string).

2. password - String - The password of the account.

9.15.2 Returns

Promise<string> - The address of the account.

9.15.3 Example

web3.eth.personal.importRawKey(
˓→"cd3376bb711cb332ee3fb2ca04c6a8b9f70c316fcdf7a1f44ef4c7999483295e", "password1234")

.then(console.log);
> "0x8f337bf484b2fc75e4b0436645dcc226ee2ac531"

106 Chapter 9. web3.eth.personal

 CHAPTER 10

web3.eth.ens

The web3.eth.ens functions let you interacting with ENS.

10.1 registry

web3.eth.ens.registry;

Returns the network specific ENS registry.

10.1.1 Returns

Registry - The current ENS registry.

10.1.2 Example

web3.eth.ens.registry;
> {
ens: ENS,
contract: Contract,
owner: Function(name),
resolve: Function(name)
}

107
web3.js Documentation, Release 1.0.0

10.2 resolver

web3.eth.ens.resolver(name);

Returns the resolver contract to an Ethereum address.

10.2.1 Returns

Reslver - The ENS resolver for this name.

10.2.2 Example

web3.eth.ens.resolver('ethereum.eth').then(function (contract) {
console.log(contract);
});
> Contract<Resolver>

10.3 getAddress

web3.eth.ens.getAddress(ENSName);

Resolves an ENS name to an Ethereum address.

10.3.1 Parameters

1. ENSName - String: The ENS name to resolve.

10.3.2 Returns

String - The Ethereum address of the given name.

10.3.3 Example

web3.eth.ens.getAddress('ethereum.eth').then(function (address) {
console.log(address);
})
> 0xfB6916095ca1df60bB79Ce92cE3Ea74c37c5d359

10.4 setAddress

108 Chapter 10. web3.eth.ens

 web3.js Documentation, Release 1.0.0

web3.eth.ens.setAddress(ENSName, address, options);

Sets the address of an ENS name in his resolver.

10.4.1 Parameters

1. ENSName - String: The ENS name.

2. address - String: The address to set.
3. options - Object: The options used for sending.
• from - String: The address the transaction should be sent from.
• gasPrice - String (optional): The gas price in wei to use for this transaction.
• gas - Number (optional): The maximum gas provided for this transaction (gas limit).
Emits an AddrChanged event.

10.4.2 Example

web3.eth.ens.setAddress(
'ethereum.eth',
'0xfB6916095ca1df60bB79Ce92cE3Ea74c37c5d359',
{
from: '0x9CC9a2c777605Af16872E0997b3Aeb91d96D5D8c'
}
).then(function (result) {
console.log(result.events);
});
> AddrChanged(...)

// Or using the event emitter

web3.eth.ens.setAddress(
'ethereum.eth',
'0xfB6916095ca1df60bB79Ce92cE3Ea74c37c5d359',
{
from: '0x9CC9a2c777605Af16872E0997b3Aeb91d96D5D8c'
}
)
.on('transactionHash', function(hash){
...
})
.on('confirmation', function(confirmationNumber, receipt){
...
})
.on('receipt', function(receipt){
...
})
.on('error', console.error);

// Or listen to the AddrChanged event on the resolver

web3.eth.ens.resolver('ethereum.eth').then(function (resolver) {
(continues on next page)

10.4. setAddress 109

web3.js Documentation, Release 1.0.0

(continued from previous page)

resolver.events.AddrChanged({fromBlock: 0}, function(error, event) {
console.log(event);
})
.on('data', function(event){
console.log(event);
})
.on('changed', function(event){
// remove event from local database
})
.on('error', console.error);
});

For further information on the handling of contract events please see here contract-
˓→events_.

10.5 getPubkey

web3.eth.ens.getPubkey(ENSName);

Returns the X and Y coordinates of the curve point for the public key.

10.5.1 Parameters

1. ENSName - String: The ENS name.

10.5.2 Returns

Object<String, String> - The X and Y coordinates.

10.5.3 Example

web3.eth.ens.getPubkey('ethereum.eth').then(function (result) {
console.log(result)
});
> {
"0": "0x0000000000000000000000000000000000000000000000000000000000000000",
"1": "0x0000000000000000000000000000000000000000000000000000000000000000",
"x": "0x0000000000000000000000000000000000000000000000000000000000000000",
"y": "0x0000000000000000000000000000000000000000000000000000000000000000"
}

110 Chapter 10. web3.eth.ens

 web3.js Documentation, Release 1.0.0

10.6 setPubkey

web3.eth.ens.setPubkey(ENSName, x, y, options);

Sets the SECP256k1 public key associated with an ENS node

10.6.1 Parameters

1. ENSName - String: The ENS name.

2. x - String: The X coordinate of the public key.
3. y - String: The Y coordinate of the public key.
4. options - Object: The options used for sending.
• from - String: The address the transaction should be sent from.
• gasPrice - String (optional): The gas price in wei to use for this transaction.
• gas - Number (optional): The maximum gas provided for this transaction (gas limit).
Emits an PubkeyChanged event.

10.6.2 Example

web3.eth.ens.setPubkey(
'ethereum.eth',
'0x0000000000000000000000000000000000000000000000000000000000000000',
'0x0000000000000000000000000000000000000000000000000000000000000000',
{
from: '0x9CC9a2c777605Af16872E0997b3Aeb91d96D5D8c'
}
).then(function (result) {
console.log(result.events);
});
> PubkeyChanged(...)

// Or using the event emitter

web3.eth.ens.setPubkey(
'ethereum.eth',
'0x0000000000000000000000000000000000000000000000000000000000000000',
'0x0000000000000000000000000000000000000000000000000000000000000000',
{
from: '0x9CC9a2c777605Af16872E0997b3Aeb91d96D5D8c'
}
)
.on('transactionHash', function(hash){
...
})
.on('confirmation', function(confirmationNumber, receipt){
...
})
.on('receipt', function(receipt){
...
(continues on next page)

10.6. setPubkey 111

web3.js Documentation, Release 1.0.0

(continued from previous page)

})
.on('error', console.error);

// Or listen to the PubkeyChanged event on the resolver

web3.eth.ens.resolver('ethereum.eth').then(function (resolver) {
resolver.events.PubkeyChanged({fromBlock: 0}, function(error, event) {
console.log(event);
})
.on('data', function(event){
console.log(event);
})
.on('changed', function(event){
// remove event from local database
})
.on('error', console.error);
});

For further information on the handling of contract events please see here contract-
˓→events_.

10.7 getContent

web3.eth.ens.getContent(ENSName);

Returns the content hash associated with an ENS node.

10.7.1 Parameters

1. ENSName - String: The ENS name.

10.7.2 Returns

String - The content hash associated with an ENS node.

10.7.3 Example

web3.eth.ens.getContent('ethereum.eth').then(function (result) {
console.log(result);
});
> "0x0000000000000000000000000000000000000000000000000000000000000000"

112 Chapter 10. web3.eth.ens

 web3.js Documentation, Release 1.0.0

10.8 setContent

web3.eth.ens.setContent(ENSName, hash, options);

Sets the content hash associated with an ENS node.

10.8.1 Parameters

1. ENSName - String: The ENS name.

2. hash - String: The content hash to set.
3. options - Object: The options used for sending.
• from - String: The address the transaction should be sent from.
• gasPrice - String (optional): The gas price in wei to use for this transaction.
• gas - Number (optional): The maximum gas provided for this transaction (gas limit).
Emits an ContentChanged event.

10.8.2 Example

web3.eth.ens.setContent(
'ethereum.eth',
'0x0000000000000000000000000000000000000000000000000000000000000000',
{
from: '0x9CC9a2c777605Af16872E0997b3Aeb91d96D5D8c'
}
).then(function (result) {
console.log(result.events);
});
> ContentChanged(...)

// Or using the event emitter

web3.eth.ens.setContent(
'ethereum.eth',
'0x0000000000000000000000000000000000000000000000000000000000000000',
{
from: '0x9CC9a2c777605Af16872E0997b3Aeb91d96D5D8c'
}
)
.on('transactionHash', function(hash){
...
})
.on('confirmation', function(confirmationNumber, receipt){
...
})
.on('receipt', function(receipt){
...
})
.on('error', console.error);

// Or listen to the ContentChanged event on the resolver

(continues on next page)

10.8. setContent 113

web3.js Documentation, Release 1.0.0

(continued from previous page)

web3.eth.ens.resolver('ethereum.eth').then(function (resolver) {
resolver.events.ContentChanged({fromBlock: 0}, function(error, event) {
console.log(event);
})
.on('data', function(event){
console.log(event);
})
.on('changed', function(event){
// remove event from local database
})
.on('error', console.error);
});

For further information on the handling of contract events please see here contract-
˓→events_.

10.9 getMultihash

web3.eth.ens.getMultihash(ENSName);

Returns the multihash associated with an ENS node.

10.9.1 Parameters

1. ENSName - String: The ENS name.

10.9.2 Returns

String - The associated multihash.

10.9.3 Example

web3.eth.ens.getMultihash('ethereum.eth').then(function (result) {
console.log(result);
});
> 'QmXpSwxdmgWaYrgMUzuDWCnjsZo5RxphE3oW7VhTMSCoKK'

10.10 setMultihash

web3.eth.ens.setMultihash(ENSName, hash, options);

Sets the multihash associated with an ENS node.

114 Chapter 10. web3.eth.ens

 web3.js Documentation, Release 1.0.0

10.10.1 Parameters

1. ENSName - String: The ENS name.

2. hash - String: The multihash to set.
3. options - Object: The options used for sending.
• from - String: The address the transaction should be sent from.
• gasPrice - String (optional): The gas price in wei to use for this transaction.
• gas - Number (optional): The maximum gas provided for this transaction (gas limit).
Emits an ‘‘MultihashChanged‘‘event.

10.10.2 Example

web3.eth.ens.setMultihash(
'ethereum.eth',
'QmXpSwxdmgWaYrgMUzuDWCnjsZo5RxphE3oW7VhTMSCoKK',
{
from: '0x9CC9a2c777605Af16872E0997b3Aeb91d96D5D8c'
}
).then(function (result) {
console.log(result.events);
});
> MultihashChanged(...)

// Or using the event emitter

web3.eth.ens.setMultihash(
'ethereum.eth',
'QmXpSwxdmgWaYrgMUzuDWCnjsZo5RxphE3oW7VhTMSCoKK',
{
from: '0x9CC9a2c777605Af16872E0997b3Aeb91d96D5D8c'
}
)
.on('transactionHash', function(hash){
...
})
.on('confirmation', function(confirmationNumber, receipt){
...
})
.on('receipt', function(receipt){
...
})
.on('error', console.error);

For further information on the handling of contract events please see here contract-
˓→events_.

10.11 ENS events

The ENS API provides the possibility for listening to all ENS related events.

10.11. ENS events 115

web3.js Documentation, Release 1.0.0

10.11.1 Known resolver events

1. AddrChanged(node bytes32, a address)

2. ContentChanged(node bytes32, hash bytes32) 4. NameChanged(node bytes32, name string) 5. ABIChanged(node
bytes32, contentType uint256) 6. PubkeyChanged(node bytes32, x bytes32, y bytes32)

10.11.2 Example

web3.eth.ens.resolver('ethereum.eth').then(function (resolver) {
resolver.events.AddrChanged({fromBlock: 0}, function(error, event) {
console.log(event);
})
.on('data', function(event){
console.log(event);
})
.on('changed', function(event){
// remove event from local database
})
.on('error', console.error);
});
> {
returnValues: {
node: '0x123456789...',
a: '0x123456789...',
},
raw: {
data: '0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',
topics: [
'0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385'
]
},
event: 'AddrChanged',
signature: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
logIndex: 0,
transactionIndex: 0,
transactionHash:
˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',

blockHash: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
blockNumber: 1234,
address: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'
}

10.11.3 Known registry events

1. Transfer(node bytes32, owner address)

2. NewOwner(node bytes32, label bytes32, owner address) 4. NewResolver(node bytes32, resolver address) 5.
NewTTL(node bytes32, ttl uint64)

116 Chapter 10. web3.eth.ens

 web3.js Documentation, Release 1.0.0

10.11.4 Example

web3.eth.ens.resistry.then(function (registry) {
registry.events.Transfer({fromBlock: 0}, , function(error, event) {
console.log(event);
})
.on('data', function(event){
console.log(event);
})
.on('changed', function(event){
// remove event from local database
})
.on('error', console.error);
});
> {
returnValues: {
node: '0x123456789...',
owner: '0x123456789...',
},
raw: {
data: '0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',
topics: [
'0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385'
]
},
event: 'Transfer',
signature: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
logIndex: 0,
transactionIndex: 0,
transactionHash:
˓→'0x7f9fade1c0d57a7af66ab4ead79fade1c0d57a7af66ab4ead7c2c2eb7b11a91385',

blockHash: '0xfd43ade1c09fade1c0d57a7af66ab4ead7c2c2eb7b11a91ffdd57a7af66ab4ead7',
blockNumber: 1234,
address: '0xde0B295669a9FD93d5F28D9Ec85E40f4cb697BAe'
}

For further information on the handling of contract events please see here contract-events_.

10.11. ENS events 117

web3.js Documentation, Release 1.0.0

118 Chapter 10. web3.eth.ens

 CHAPTER 11

web3.eth.Iban

The web3.eth.Iban function lets convert Ethereum addresses from and to IBAN and BBAN.

11.1 Iban instance

This’s instance of Iban

> Iban { _iban: 'XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS' }

11.2 Iban contructor

new web3.eth.Iban(ibanAddress)

Generates a iban object with conversion methods and validity checks. Also has singleton functions for conversion like
Iban.toAddress(), Iban.toIban(), Iban.fromAddress(), Iban.fromBban(), Iban.createIndirect(), Iban.isValid().

11.2.1 Parameters

1. String: the IBAN address to instantiate an Iban instance from.

11.2.2 Returns

Object - The Iban instance.

119
web3.js Documentation, Release 1.0.0

11.2.3 Example

var iban = new web3.eth.Iban("XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS");

> Iban { _iban: 'XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS' }

11.3 toAddress

static function

web3.eth.Iban.toAddress(ibanAddress)

Singleton: Converts a direct IBAN address into an Ethereum address.

Note: This method also exists on the IBAN instance.

11.3.1 Parameters

1. String: the IBAN address to convert.

11.3.2 Returns

String - The Ethereum address.

11.3.3 Example

web3.eth.Iban.toAddress("XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS");
> "0x00c5496aEe77C1bA1f0854206A26DdA82a81D6D8"

11.4 toIban

static function

web3.eth.Iban.toIban(address)

Singleton: Converts an Ethereum address to a direct IBAN address.

11.4.1 Parameters

1. String: the Ethereum address to convert.

120 Chapter 11. web3.eth.Iban

 web3.js Documentation, Release 1.0.0

11.4.2 Returns

String - The IBAN address.

11.4.3 Example

web3.eth.Iban.toIban("0x00c5496aEe77C1bA1f0854206A26DdA82a81D6D8");
> "XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS"

static function, return IBAN instance

11.5 fromAddress

web3.eth.Iban.fromAddress(address)

Singleton: Converts an Ethereum address to a direct IBAN instance.

11.5.1 Parameters

1. String: the Ethereum address to convert.

11.5.2 Returns

Object - The IBAN instance.

11.5.3 Example

web3.eth.Iban.fromAddress("0x00c5496aEe77C1bA1f0854206A26DdA82a81D6D8");
> Iban {_iban: "XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS"}

static function, return IBAN instance

11.6 fromBban

web3.eth.Iban.fromBban(bbanAddress)

Singleton: Converts an BBAN address to a direct IBAN instance.

11.6.1 Parameters

1. String: the BBAN address to convert.

11.5. fromAddress 121

web3.js Documentation, Release 1.0.0

11.6.2 Returns

Object - The IBAN instance.

11.6.3 Example

web3.eth.Iban.fromBban('ETHXREGGAVOFYORK');
> Iban {_iban: "XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS"}

static function, return IBAN instance

11.7 createIndirect

web3.eth.Iban.createIndirect(options)

Singleton: Creates an indirect IBAN address from a institution and identifier.

11.7.1 Parameters

1. Object: the options object as follows:

• institution - String: the institution to be assigned
• identifier - String: the identifier to be assigned

11.7.2 Returns

Object - The IBAN instance.

11.7.3 Example

web3.eth.Iban.createIndirect({
institution: "XREG",
identifier: "GAVOFYORK"
});
> Iban {_iban: "XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS"}

static function, return boolean

11.8 isValid

web3.eth.Iban.isValid(ibanAddress)

122 Chapter 11. web3.eth.Iban

 web3.js Documentation, Release 1.0.0

Singleton: Checks if an IBAN address is valid.

Note: This method also exists on the IBAN instance.

11.8.1 Parameters

1. String: the IBAN address to check.

11.8.2 Returns

Boolean

11.8.3 Example

web3.eth.Iban.isValid("XE81ETHXREGGAVOFYORK");
> true

web3.eth.Iban.isValid("XE82ETHXREGGAVOFYORK");
> false // because the checksum is incorrect

11.9 prototype.isValid

method of Iban instance

web3.eth.Iban.prototype.isValid()

Singleton: Checks if an IBAN address is valid.

Note: This method also exists on the IBAN instance.

11.9.1 Parameters

1. String: the IBAN address to check.

11.9.2 Returns

Boolean

11.9. prototype.isValid 123

web3.js Documentation, Release 1.0.0

11.9.3 Example

var iban = new web3.eth.Iban("XE81ETHXREGGAVOFYORK");

iban.isValid();
> true

11.10 prototype.isDirect

method of Iban instance

web3.eth.Iban.prototype.isDirect()

Checks if the IBAN instance is direct.

11.10.1 Parameters

none

11.10.2 Returns

Boolean

11.10.3 Example

var iban = new web3.eth.Iban("XE81ETHXREGGAVOFYORK");

iban.isDirect();
> false

11.11 prototype.isIndirect

method of Iban instance

web3.eth.Iban.prototype.isIndirect()

Checks if the IBAN instance is indirect.

11.11.1 Parameters

none

11.11.2 Returns

Boolean

124 Chapter 11. web3.eth.Iban

 web3.js Documentation, Release 1.0.0

11.11.3 Example

var iban = new web3.eth.Iban("XE81ETHXREGGAVOFYORK");

iban.isIndirect();
> true

11.12 prototype.checksum

method of Iban instance

web3.eth.Iban.prototype.checksum()

Returns the checksum of the IBAN instance.

11.12.1 Parameters

none

11.12.2 Returns

String: The checksum of the IBAN

11.12.3 Example

var iban = new web3.eth.Iban("XE81ETHXREGGAVOFYORK");

iban.checksum();
> "81"

11.13 prototype.institution

method of Iban instance

web3.eth.Iban.prototype.institution()

Returns the institution of the IBAN instance.

11.13.1 Parameters

none

11.13.2 Returns

String: The institution of the IBAN

11.12. prototype.checksum 125

web3.js Documentation, Release 1.0.0

11.13.3 Example

var iban = new web3.eth.Iban("XE81ETHXREGGAVOFYORK");

iban.institution();
> 'XREG'

11.14 prototype.client

method of Iban instance

web3.eth.Iban.prototype.client()

Returns the client of the IBAN instance.

11.14.1 Parameters

none

11.14.2 Returns

String: The client of the IBAN

11.14.3 Example

var iban = new web3.eth.Iban("XE81ETHXREGGAVOFYORK");

iban.client();
> 'GAVOFYORK'

11.15 prototype.toAddress

method of Iban instance

web3.eth.Iban.prototype.toString()

Returns the Ethereum address of the IBAN instance.

11.15.1 Parameters

none

11.15.2 Returns

String: The Ethereum address of the IBAN

126 Chapter 11. web3.eth.Iban

 web3.js Documentation, Release 1.0.0

11.15.3 Example

var iban = new web3.eth.Iban('XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS');

iban.toAddress();
> '0x00c5496aEe77C1bA1f0854206A26DdA82a81D6D8'

11.16 prototype.toString

method of Iban instance

web3.eth.Iban.prototype.toString()

Returns the IBAN address of the IBAN instance.

11.16.1 Parameters

none

11.16.2 Returns

String: The IBAN address.

11.16.3 Example

var iban = new web3.eth.Iban('XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS');

iban.toString();
> 'XE7338O073KYGTWWZN0F2WZ0R8PX5ZPPZS'

11.16. prototype.toString 127

web3.js Documentation, Release 1.0.0

128 Chapter 11. web3.eth.Iban

 CHAPTER 12

web3.eth.abi

The web3.eth.abi functions let you de- and encode parameters to ABI (Application Binary Interface) for function
calls to the EVM (Ethereum Virtual Machine).

12.1 encodeFunctionSignature

web3.eth.abi.encodeFunctionSignature(functionName);

Encodes the function name to its ABI signature, which are the first 4 bytes of the sha3 hash of the function name
including types.

12.1.1 Parameters

1. functionName - String|Object: The function name to encode. or the JSON interface object of the function.
If string it has to be in the form function(type,type,...), e.g: myFunction(uint256,uint32[],
bytes10,bytes)

12.1.2 Returns

String - The ABI signature of the function.

12.1.3 Example

// From a JSON interface object

web3.eth.abi.encodeFunctionSignature({
name: 'myMethod',
(continues on next page)

129
web3.js Documentation, Release 1.0.0

(continued from previous page)

type: 'function',
inputs: [{
type: 'uint256',
name: 'myNumber'
},{
type: 'string',
name: 'myString'
}]
})
> 0x24ee0097

// Or string
web3.eth.abi.encodeFunctionSignature('myMethod(uint256,string)')
> '0x24ee0097'

12.2 encodeEventSignature

web3.eth.abi.encodeEventSignature(eventName);

Encodes the event name to its ABI signature, which are the sha3 hash of the event name including input types.

12.2.1 Parameters

1. eventName - String|Object: The event name to encode. or the JSON interface object of the event. If string
it has to be in the form event(type,type,...), e.g: myEvent(uint256,uint32[],bytes10,bytes)

12.2.2 Returns

String - The ABI signature of the event.

12.2.3 Example

web3.eth.abi.encodeEventSignature('myEvent(uint256,bytes32)')
> 0xf2eeb729e636a8cb783be044acf6b7b1e2c5863735b60d6daae84c366ee87d97

// or from a json interface object

web3.eth.abi.encodeEventSignature({
name: 'myEvent',
type: 'event',
inputs: [{
type: 'uint256',
name: 'myNumber'
},{
type: 'bytes32',
name: 'myBytes'
}]
})
> 0xf2eeb729e636a8cb783be044acf6b7b1e2c5863735b60d6daae84c366ee87d97

130 Chapter 12. web3.eth.abi

 web3.js Documentation, Release 1.0.0

12.3 encodeParameter

web3.eth.abi.encodeParameter(type, parameter);

Encodes a parameter based on its type to its ABI representation.

12.3.1 Parameters

1. type - String|Object: The type of the parameter, see the solidity documentation for a list of types.
2. parameter - Mixed: The actual parameter to encode.

12.3.2 Returns

String - The ABI encoded parameter.

12.3.3 Example

web3.eth.abi.encodeParameter('uint256', '2345675643');
> "0x000000000000000000000000000000000000000000000000000000008bd02b7b"

web3.eth.abi.encodeParameter('uint256', '2345675643');
> "0x000000000000000000000000000000000000000000000000000000008bd02b7b"

web3.eth.abi.encodeParameter('bytes32', '0xdf3234');
> "0xdf32340000000000000000000000000000000000000000000000000000000000"

web3.eth.abi.encodeParameter('bytes', '0xdf3234');
>
˓→"0x000000000000000000000000000000000000000000000000000000000000002000000000000000000000000000000000

˓→"

web3.eth.abi.encodeParameter('bytes32[]', ['0xdf3234', '0xfdfd']);

>
˓→"00000000000000000000000000000000000000000000000000000000000000200000000000000000000000000000000000

˓→"

web3.eth.abi.encodeParameter(
{
"ParentStruct": {
"propertyOne": 'uint256',
"propertyTwo": 'uint256',
"childStruct": {
"propertyOne": 'uint256',
"propertyTwo": 'uint256'
}
}
},
{
"propertyOne": 42,
"propertyTwo": 56,
"childStruct": {
"propertyOne": 45,
(continues on next page)

12.3. encodeParameter 131

web3.js Documentation, Release 1.0.0

(continued from previous page)

"propertyTwo": 78
}
}
);
>
˓→ "0x000000000000000000000000000000000000000000000000000000000000002a00000000000000000000000000000000
˓→ "

12.4 encodeParameters

web3.eth.abi.encodeParameters(typesArray, parameters);

Encodes a function parameters based on its JSON interface object.

12.4.1 Parameters

1. typesArray - Array<String|Object>|Object: An array with types or a JSON interface of a func-

tion. See the solidity documentation for a list of types.
2. parameters - Array: The parameters to encode.

12.4.2 Returns

String - The ABI encoded parameters.

12.4.3 Example

web3.eth.abi.encodeParameters(['uint256','string'], ['2345675643', 'Hello!%']);

>
˓→"0x000000000000000000000000000000000000000000000000000000008bd02b7b00000000000000000000000000000000

˓→"

web3.eth.abi.encodeParameters(['uint8[]','bytes32'], [['34','434'], '0x324567fff']);

> "0x0

web3.eth.abi.encodeParameters(
[
'uint8[]',
{
"ParentStruct": {
"propertyOne": 'uint256',
"propertyTwo": 'uint256',
"ChildStruct": {
"propertyOne": 'uint256',
"propertyTwo": 'uint256'
}
}
}
(continues on next page)

132 Chapter 12. web3.eth.abi

 web3.js Documentation, Release 1.0.0

(continued from previous page)

],
[
['34','434'],
{
"propertyOne": '42',
"propertyTwo": '56',
"ChildStruct": {
"propertyOne": '45',
"propertyTwo": '78'
}
}
]
);
>
˓→ "0x00000000000000000000000000000000000000000000000000000000000000a000000000000000000000000000000000
˓→ "

12.5 encodeFunctionCall

web3.eth.abi.encodeFunctionCall(jsonInterface, parameters);

Encodes a function call using its JSON interface object and given paramaters.

12.5.1 Parameters

1. jsonInterface - Object: The JSON interface object of a function.

2. parameters - Array: The parameters to encode.

12.5.2 Returns

String - The ABI encoded function call. Means function signature + parameters.

12.5.3 Example

web3.eth.abi.encodeFunctionCall({
name: 'myMethod',
type: 'function',
inputs: [{
type: 'uint256',
name: 'myNumber'
},{
type: 'string',
name: 'myString'
}]
}, ['2345675643', 'Hello!%']);
>
˓→"0x24ee0097000000000000000000000000000000000000000000000000000000008bd02b7b000000000000000000000000

˓→"

12.5. encodeFunctionCall 133

web3.js Documentation, Release 1.0.0

12.6 decodeParameter

web3.eth.abi.decodeParameter(type, hexString);

Decodes an ABI encoded parameter to its JavaScript type.

12.6.1 Parameters

1. type - String|Object: The type of the parameter, see the solidity documentation for a list of types.
2. hexString - String: The ABI byte code to decode.

12.6.2 Returns

Mixed - The decoded parameter.

12.6.3 Example

web3.eth.abi.decodeParameter('uint256',
˓→'0x0000000000000000000000000000000000000000000000000000000000000010');

> "16"

web3.eth.abi.decodeParameter('string',
˓→'0x000000000000000000000000000000000000000000000000000000000000002000000000000000000000000000000000

˓→');

> "Hello!%!"

web3.eth.abi.decodeParameter('string',
˓→'0x000000000000000000000000000000000000000000000000000000000000002000000000000000000000000000000000

˓→');

> "Hello!%!"

web3.eth.abi.decodeParameter(
{
"ParentStruct": {
"propertyOne": 'uint256',
"propertyTwo": 'uint256',
"childStruct": {
"propertyOne": 'uint256',
"propertyTwo": 'uint256'
}
}
},

,
˓→'0x000000000000000000000000000000000000000000000000000000000000002a00000000000000000000000000000000
˓→');
> {
'0': {
(continues on next page)

134 Chapter 12. web3.eth.abi

 web3.js Documentation, Release 1.0.0

(continued from previous page)

'0': '42',
'1': '56',
'2': {
'0': '45',
'1': '78',
'propertyOne': '45',
'propertyTwo': '78'
},
'childStruct': {
'0': '45',
'1': '78',
'propertyOne': '45',
'propertyTwo': '78'
},
'propertyOne': '42',
'propertyTwo': '56'
},
'ParentStruct': {
'0': '42',
'1': '56',
'2': {
'0': '45',
'1': '78',
'propertyOne': '45',
'propertyTwo': '78'
},
'childStruct': {
'0': '45',
'1': '78',
'propertyOne': '45',
'propertyTwo': '78'
},
'propertyOne': '42',
'propertyTwo': '56'
}
}

12.7 decodeParameters

web3.eth.abi.decodeParameters(typesArray, hexString);

Decodes ABI encoded parameters to its JavaScript types.

12.7.1 Parameters

1. typesArray - Array<String|Object>|Object: An array with types or a JSON interface outputs

array. See the solidity documentation for a list of types.
2. hexString - String: The ABI byte code to decode.

12.7. decodeParameters 135

web3.js Documentation, Release 1.0.0

12.7.2 Returns

Object - The result object containing the decoded parameters.

12.7.3 Example

web3.eth.abi.decodeParameters(['string', 'uint256'],
˓→'0x000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000

˓→');

> Result { '0': 'Hello!%!', '1': '234' }

web3.eth.abi.decodeParameters([{
type: 'string',
name: 'myString'
},{
type: 'uint256',
name: 'myNumber'
}],
˓→'0x000000000000000000000000000000000000000000000000000000000000004000000000000000000000000000000000

˓→');

> Result {
'0': 'Hello!%!',
'1': '234',
myString: 'Hello!%!',
myNumber: '234'
}

web3.eth.abi.decodeParameters([
'uint8[]',
{
"ParentStruct": {
"propertyOne": 'uint256',
"propertyTwo": 'uint256',
"childStruct": {
"propertyOne": 'uint256',
"propertyTwo": 'uint256'
}
}
}
],
˓→'0x00000000000000000000000000000000000000000000000000000000000000a000000000000000000000000000000000

˓→');

> Result {
'0': ['42', '24'],
'1': {
'0': '42',
'1': '56',
'2':
{
'0': '45',
'1': '78',
'propertyOne': '45',
'propertyTwo': '78'
},
'childStruct':
{
(continues on next page)

136 Chapter 12. web3.eth.abi

 web3.js Documentation, Release 1.0.0

(continued from previous page)

'0': '45',
'1': '78',
'propertyOne': '45',
'propertyTwo': '78'
},
'propertyOne': '42',
'propertyTwo': '56'
}
}

12.8 decodeLog

web3.eth.abi.decodeLog(inputs, hexString, topics);

Decodes ABI encoded log data and indexed topic data.

12.8.1 Parameters

1. inputs - Object: A JSON interface inputs array. See the solidity documentation for a list of types.
2. hexString - String: The ABI byte code in the data field of a log.
3. topics - Array: An array with the index parameter topics of the log, without the topic[0] if its a non-
anonymous event, otherwise with topic[0].

12.8.2 Returns

Object - The result object containing the decoded parameters.

12.8.3 Example

web3.eth.abi.decodeLog([{
type: 'string',
name: 'myString'
},{
type: 'uint256',
name: 'myNumber',
indexed: true
},{
type: 'uint8',
name: 'mySmallNumber',
indexed: true
}],

˓→ '0x000000000000000000000000000000000000000000000000000000000000002000000000000000000000000000000000
˓→ ',
['0x000000000000000000000000000000000000000000000000000000000000f310',
˓→'0x0000000000000000000000000000000000000000000000000000000000000010']);

> Result {
(continues on next page)

12.8. decodeLog 137

web3.js Documentation, Release 1.0.0

(continued from previous page)

'0': 'Hello%!',
'1': '62224',
'2': '16',
myString: 'Hello%!',
myNumber: '62224',
mySmallNumber: '16'
}

138 Chapter 12. web3.eth.abi

 CHAPTER 13

web3.*.net

The web3-net package allows you to interact with the Ethereum nodes network properties.

var Net = require('web3-net');

// "Personal.providers.givenProvider" will be set if in an Ethereum supported browser.

var net = new Net(Net.givenProvider || 'ws://some.local-or-remote.node:8546');

// or using the web3 umbrella package

var Web3 = require('web3');

var web3 = new Web3(Web3.givenProvider || 'ws://some.local-or-remote.node:8546');

// -> web3.eth.net
// -> web3.bzz.net
// -> web3.shh.net

13.1 getId

web3.eth.net.getId([callback])
web3.bzz.net.getId([callback])
web3.shh.net.getId([callback])

Gets the current network ID.

13.1.1 Parameters

none

139
web3.js Documentation, Release 1.0.0

13.1.2 Returns

Promise returns Number: The network ID.

13.1.3 Example

web3.eth.net.getId()
.then(console.log);
> 1

13.2 isListening

web3.eth.net.isListening([callback])
web3.bzz.net.isListening([callback])
web3.shh.net.isListening([callback])

Checks if the node is listening for peers.

13.2.1 Parameters

none

13.2.2 Returns

Promise returns Boolean

13.2.3 Example

web3.eth.isListening()
.then(console.log);
> true

13.3 getPeerCount

web3.eth.net.getPeerCount([callback])
web3.bzz.net.getPeerCount([callback])
web3.shh.net.getPeerCount([callback])

Get the number of peers connected to.

13.3.1 Parameters

none

140 Chapter 13. web3.*.net

 web3.js Documentation, Release 1.0.0

13.3.2 Returns

Promise returns Number

13.3.3 Example

web3.eth.getPeerCount()
.then(console.log);
> 25

13.3. getPeerCount 141

web3.js Documentation, Release 1.0.0

142 Chapter 13. web3.*.net

 CHAPTER 14

web3.bzz

Note: This API might change over time.

The web3-bzz package allows you to interact swarm the decentralized file store. For more see the Swarm Docs.

var Bzz = require('web3-bzz');

// will autodetect if the "ethereum" object is present and will either connect to the
˓→local swarm node, or the swarm-gateways.net.

// Optional you can give your own provider URL; If no provider URL is given it will
˓→use "http://swarm-gateways.net"

var bzz = new Bzz(Bzz.givenProvider || 'http://swarm-gateways.net');

// or using the web3 umbrella package

var Web3 = require('web3');

var web3 = new Web3(Web3.givenProvider || 'ws://some.local-or-remote.node:8546');

// -> web3.bzz.currentProvider // if Web3.givenProvider was an ethereum provider it

˓→will set: "http://localhost:8500" otherwise it will set: "http://swarm-gateways.net"

// set the provider manually if necessary

web3.bzz.setProvider("http://localhost:8500");

14.1 setProvider

web3.bzz.setProvider(myProvider)

143
web3.js Documentation, Release 1.0.0

Will change the provider for its module.

Note: When called on the umbrella package web3 it will also set the provider for all sub modules web3.eth,
web3.shh, etc EXCEPT web3.bzz which needs a separate provider at all times.

14.1.1 Parameters

1. Object - myProvider: a valid provider.

14.1.2 Returns

Boolean

14.1.3 Example

var Bzz = require('web3-bzz');

var bzz = new Bzz('http://localhost:8500');

// change provider
bzz.setProvider('http://swarm-gateways.net');

14.2 givenProvider

web3.bzz.givenProvider

When using web3.js in an Ethereum compatible browser, it will set with the current native provider by that browser.
Will return the given provider by the (browser) environment, otherwise null.

14.2.1 Returns

Object: The given provider set or null;

14.2.2 Example

bzz.givenProvider;
> {
send: function(),
on: function(),
bzz: "http://localhost:8500",
shh: true,
...
}

bzz.setProvider(bzz.givenProvider || "http://swarm-gateways.net");

144 Chapter 14. web3.bzz

 web3.js Documentation, Release 1.0.0

14.3 currentProvider

bzz.currentProvider

Will return the current provider URL, otherwise null.

14.3.1 Returns

Object: The current provider URL or null;

14.3.2 Example

bzz.currentProvider;
> "http://localhost:8500"

if(!bzz.currentProvider) {
bzz.setProvider("http://swarm-gateways.net");
}

14.4 upload

web3.bzz.upload(mixed)

Uploads files folders or raw data to swarm.

14.4.1 Parameters

1. mixed - String|Buffer|Uint8Array|Object: The data to upload, can be a file content, file Buffer/Uint8Array, mu

• String|Buffer|Uint8Array: A file content, file Uint8Array or Buffer to upload, or:

• Object:
1. Multiple key values for files and directories. The paths will be kept the same:
– key must be the files path, or name, e.g. "/foo.txt" and its value is an object with:

* type: The mime-type of the file, e.g. "text/html".

* data: A file content, file Uint8Array or Buffer to upload.
2. Upload a file or a directory from disk in Node.js. Requires and object with the following properties:

– path: The path to the file or directory.

– kind: The type of the source "directory", "file" or "data".

14.3. currentProvider 145

web3.js Documentation, Release 1.0.0

– defaultFile (optional): Path of the “defaultFile” when "kind":

"directory", e.g. "/index.html".
3. Upload file or folder in the browser. Requres and object with the following properties:

– pick: The file picker to launch. Can be "file", "directory" or "data".

14.4.2 Returns

Promise returning String: Returns the content hash of the manifest.

14.4.3 Example

var bzz = web3.bzz;

// raw data
bzz.upload("test file").then(function(hash) {
console.log("Uploaded file. Address:", hash);
})

// raw directory
var dir = {
"/foo.txt": {type: "text/plain", data: "sample file"},
"/bar.txt": {type: "text/plain", data: "another file"}
};
bzz.upload(dir).then(function(hash) {
console.log("Uploaded directory. Address:", hash);
});

// upload from disk in node.js

bzz.upload({
path: "/path/to/thing", // path to data / file / directory
kind: "directory", // could also be "file" or "data"
defaultFile: "/index.html" // optional, and only for kind === "directory"
})
.then(console.log)
.catch(console.log);

// upload from disk in the browser

bzz.upload({pick: "file"}) // could also be "directory" or "data"
.then(console.log);

14.5 download

web3.bzz.download(bzzHash [, localpath])

Downloads files and folders from swarm, as buffer or to disk (only node.js).

146 Chapter 14. web3.bzz

 web3.js Documentation, Release 1.0.0

14.5.1 Parameters

1. bzzHash - String: The file or directory to download. If the hash is a raw file it will return a Buffer, if a
manifest file, it will return the directory structure. If the localpath is given, it will return that path where it
downloaded the files to.
2. localpath - String: The local folder to download the content into. (only node.js)

14.5.2 Returns

Promise returning Buffer|Object|String: The Buffer of the file downloaded, an object with the directory
structure, or the path where it was downloaded to.

14.5.3 Example

var bzz = web3.bzz;

// download raw file

var fileHash = "a5c10851ef054c268a2438f10a21f6efe3dc3dcdcc2ea0e6a1a7a38bf8c91e23";
bzz.download(fileHash).then(function(buffer) {
console.log("Downloaded file:", buffer.toString());
});

// download directory, if the hash is manifest file.

var dirHash = "7e980476df218c05ecfcb0a2ca73597193a34c5a9d6da84d54e295ecd8e0c641";
bzz.download(dirHash).then(function(dir) {
console.log("Downloaded directory:");
> {
'bar.txt': { type: 'text/plain', data: <Buffer 61 6e 6f 74 68 65 72 20 66 69
˓→6c 65> },

'foo.txt': { type: 'text/plain', data: <Buffer 73 61 6d 70 6c 65 20 66 69 6c

˓→65> }

}
});

// download file/directory to disk (only node.js)

var dirHash = "a5c10851ef054c268a2438f10a21f6efe3dc3dcdcc2ea0e6a1a7a38bf8c91e23";
bzz.download(dirHash, "/target/dir")
.then(path => console.log(`Downloaded directory to ${path}.`))
.catch(console.log);

14.6 pick

web3.bzz.pick.file()
web3.bzz.pick.directory()
web3.bzz.pick.data()

Opens a file picker in the browser to select file(s), directory or data.

14.6. pick 147

web3.js Documentation, Release 1.0.0

14.6.1 Parameters

none

14.6.2 Returns

Promise returning Object: Returns the file or multiple files.

14.6.3 Example

web3.bzz.pick.file()
.then(console.log);
> {
...
}

148 Chapter 14. web3.bzz

 CHAPTER 15

web3.shh

The web3-shh package allows you to interact with the whisper protocol for broadcasting. For more see Whisper
Overview.

var Shh = require('web3-shh');

// "Shh.providers.givenProvider" will be set if in an Ethereum supported browser.

var shh = new Shh(Shh.givenProvider || 'ws://some.local-or-remote.node:8546');

// or using the web3 umbrella package

var Web3 = require('web3');

var web3 = new Web3(Web3.givenProvider || 'ws://some.local-or-remote.node:8546');

// -> web3.shh

15.1 setProvider

web3.setProvider(myProvider)
web3.eth.setProvider(myProvider)
web3.shh.setProvider(myProvider)
web3.bzz.setProvider(myProvider)
...

Will change the provider for its module.

Note: When called on the umbrella package web3 it will also set the provider for all sub modules web3.eth,
web3.shh, etc EXCEPT web3.bzz which needs a separate provider at all times.

149
web3.js Documentation, Release 1.0.0

15.1.1 Parameters

1. Object - myProvider: a valid provider.

15.1.2 Returns

Boolean

15.1.3 Example

var Web3 = require('web3');

var web3 = new Web3('http://localhost:8545');
// or
var web3 = new Web3(new Web3.providers.HttpProvider('http://localhost:8545'));

// change provider
web3.setProvider('ws://localhost:8546');
// or
web3.setProvider(new Web3.providers.WebsocketProvider('ws://localhost:8546'));

// Using the IPC provider in node.js

var net = require('net');
var web3 = new Web3('/Users/myuser/Library/Ethereum/geth.ipc', net); // mac os path
// or
var web3 = new Web3(new Web3.providers.IpcProvider('/Users/myuser/Library/Ethereum/
˓→geth.ipc', net)); // mac os path

// on windows the path is: "\\\\.\\pipe\\geth.ipc"

// on linux the path is: "/users/myuser/.ethereum/geth.ipc"

15.2 providers

web3.providers
web3.eth.providers
web3.shh.providers
web3.bzz.providers
...

Contains the current available providers.

15.2.1 Value

Object with the following providers:

• Object - HttpProvider: The HTTP provider is deprecated, as it won’t work for subscriptions.
• Object - WebsocketProvider: The Websocket provider is the standard for usage in legacy browsers.
• Object - IpcProvider: The IPC provider is used node.js dapps when running a local node. Gives the most
secure connection.

150 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

15.2.2 Example

var Web3 = require('web3');

// use the given Provider, e.g in Mist, or instantiate a new websocket provider
var web3 = new Web3(Web3.givenProvider || 'ws://remotenode.com:8546');
// or
var web3 = new Web3(Web3.givenProvider || new Web3.providers.WebsocketProvider('ws://
˓→remotenode.com:8546'));

// Using the IPC provider in node.js

var net = require('net');

var web3 = new Web3('/Users/myuser/Library/Ethereum/geth.ipc', net); // mac os path

// or
var web3 = new Web3(new Web3.providers.IpcProvider('/Users/myuser/Library/Ethereum/
˓→geth.ipc', net)); // mac os path

// on windows the path is: "\\\\.\\pipe\\geth.ipc"

// on linux the path is: "/users/myuser/.ethereum/geth.ipc"

15.3 givenProvider

web3.givenProvider
web3.eth.givenProvider
web3.shh.givenProvider
web3.bzz.givenProvider
...

When using web3.js in an Ethereum compatible browser, it will set with the current native provider by that browser.
Will return the given provider by the (browser) environment, otherwise null.

15.3.1 Returns

Object: The given provider set or null;

15.3.2 Example

15.4 currentProvider

web3.currentProvider
web3.eth.currentProvider
web3.shh.currentProvider
web3.bzz.currentProvider
...

Will return the current provider, otherwise null.

15.3. givenProvider 151

web3.js Documentation, Release 1.0.0

15.4.1 Returns

Object: The current provider set or null;

15.4.2 Example

15.5 BatchRequest

new web3.BatchRequest()
new web3.eth.BatchRequest()
new web3.shh.BatchRequest()
new web3.bzz.BatchRequest()

Class to create and execute batch requests.

15.5.1 Parameters

none

15.5.2 Returns

Object: With the following methods:

• add(request): To add a request object to the batch call.
• execute(): Will execute the batch request.

15.5.3 Example

var contract = new web3.eth.Contract(abi, address);

var batch = new web3.BatchRequest();

batch.add(web3.eth.getBalance.request('0x0000000000000000000000000000000000000000',
˓→'latest', callback));

batch.add(contract.methods.balance(address).call.request({from:
˓→'0x0000000000000000000000000000000000000000'}, callback2));

batch.execute();

15.6 extend

web3.extend(methods)
web3.eth.extend(methods)
web3.shh.extend(methods)
web3.bzz.extend(methods)
...

152 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

Allows extending the web3 modules.

Note: You also have *.extend.formatters as additional formatter functions to be used for in and output
formatting. Please see the source file for function details.

15.6.1 Parameters

1. methods - Object: Extension object with array of methods description objects as follows:
• property - String: (optional) The name of the property to add to the module. If no property is
set it will be added to the module directly.
• methods - Array: The array of method descriptions:
– name - String: Name of the method to add.
– call - String: The RPC method name.
– params - Number: (optional) The number of parameters for that function. Default 0.
– inputFormatter - Array: (optional) Array of inputformatter functions. Each ar-
ray item responds to a function parameter, so if you want some parameters not to be
formatted, add a null instead.
– outputFormatter - ``Function: (optional) Can be used to format the output
of the method.

15.6.2 Returns

Object: The extended module.

15.6.3 Example

web3.extend({
property: 'myModule',
methods: [{
name: 'getBalance',
call: 'eth_getBalance',
params: 2,
inputFormatter: [web3.extend.formatters.inputAddressFormatter, web3.extend.
˓→formatters.inputDefaultBlockNumberFormatter],

outputFormatter: web3.utils.hexToNumberString
},{
name: 'getGasPriceSuperFunction',
call: 'eth_gasPriceSuper',
params: 2,
inputFormatter: [null, web3.utils.numberToHex]
}]
});

web3.extend({
methods: [{
name: 'directCall',
call: 'eth_callForFun',
(continues on next page)

15.6. extend 153

web3.js Documentation, Release 1.0.0

(continued from previous page)

}]
});

console.log(web3);
> Web3 {
myModule: {
getBalance: function(){},
getGasPriceSuperFunction: function(){}
},
directCall: function(){},
eth: Eth {...},
bzz: Bzz {...},
...
}

15.7 getId

web3.eth.net.getId([callback])
web3.bzz.net.getId([callback])
web3.shh.net.getId([callback])

Gets the current network ID.

15.7.1 Parameters

none

15.7.2 Returns

Promise returns Number: The network ID.

15.7.3 Example

web3.eth.net.getId()
.then(console.log);
> 1

15.8 isListening

web3.eth.net.isListening([callback])
web3.bzz.net.isListening([callback])
web3.shh.net.isListening([callback])

Checks if the node is listening for peers.

154 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

15.8.1 Parameters

none

15.8.2 Returns

Promise returns Boolean

15.8.3 Example

web3.eth.isListening()
.then(console.log);
> true

15.9 getPeerCount

web3.eth.net.getPeerCount([callback])
web3.bzz.net.getPeerCount([callback])
web3.shh.net.getPeerCount([callback])

Get the number of peers connected to.

15.9.1 Parameters

none

15.9.2 Returns

Promise returns Number

15.9.3 Example

web3.eth.getPeerCount()
.then(console.log);
> 25

15.10 getVersion

web3.shh.getVersion([callback])

Returns the version of the running whisper.

15.9. getPeerCount 155

web3.js Documentation, Release 1.0.0

15.10.1 Parameters

1. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.10.2 Returns

String - The version of the current whisper running.

15.10.3 Example

web3.shh.getVersion()
.then(console.log);
> "5.0"

15.11 getInfo

web3.shh.getInfo([callback])

Gets information about the current whisper node.

15.11.1 Parameters

1. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.11.2 Returns

Object - The information of the node with the following properties:

• messages - Number: Number of currently floating messages.
• maxMessageSize - Number: The current message size limit in bytes.
• memory - Number: The memory size of the floating messages in bytes.
• minPow - Number: The current minimum PoW requirement.

15.11.3 Example

web3.shh.getInfo()
.then(console.log);
> {
"minPow": 0.8,
"maxMessageSize": 12345,
"memory": 1234335,
"messages": 20
}

156 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

15.12 setMaxMessageSize

web3.shh.setMaxMessageSize(size, [callback])

Sets the maximal message size allowed by this node. Incoming and outgoing messages with a larger size will be
rejected. Whisper message size can never exceed the limit imposed by the underlying P2P protocol (10 Mb).

15.12.1 Parameters

1. Number - Message size in bytes.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.12.2 Returns

Boolean - true on success, error on failure.

15.12.3 Example

web3.shh.setMaxMessageSize(1234565)
.then(console.log);
> true

15.13 setMinPoW

web3.shh.setMinPoW(pow, [callback])

Sets the minimal PoW required by this node.

This experimental function was introduced for the future dynamic adjustment of PoW requirement. If the node is
overwhelmed with messages, it should raise the PoW requirement and notify the peers. The new value should be set
relative to the old value (e.g. double). The old value can be obtained via web3.shh.getInfo().

15.13.1 Parameters

1. Number - The new PoW requirement.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.13.2 Returns

Boolean - true on success, error on failure.

15.12. setMaxMessageSize 157

web3.js Documentation, Release 1.0.0

15.13.3 Example

web3.shh.setMinPoW(0.9)
.then(console.log);
> true

15.14 markTrustedPeer

web3.shh.markTrustedPeer(enode, [callback])

Marks specific peer trusted, which will allow it to send historic (expired) messages.

Note: This function is not adding new nodes, the node needs to be an existing peer.

15.14.1 Parameters

1. String - Enode of the trusted peer.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.14.2 Returns

Boolean - true on success, error on failure.

15.14.3 Example

web3.shh.markTrustedPeer()
.then(console.log);
> true

15.15 newKeyPair

web3.shh.newKeyPair([callback])

Generates a new public and private key pair for message decryption and encryption.

15.15.1 Parameters

1. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

158 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

15.15.2 Returns

String - Key ID on success and an error on failure.

15.15.3 Example

web3.shh.newKeyPair()
.then(console.log);
> "5e57b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f"

15.16 addPrivateKey

web3.shh.addPrivateKey(privateKey, [callback])

Stores a key pair derived from a private key, and returns its ID.

15.16.1 Parameters

1. String - The private key as HEX bytes to import.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.16.2 Returns

String - Key ID on success and an error on failure.

15.16.3 Example

web3.shh.addPrivateKey(
˓→'0x8bda3abeb454847b515fa9b404cede50b1cc63cfdeddd4999d074284b4c21e15')

.then(console.log);
> "3e22b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f"

15.17 deleteKeyPair

web3.shh.deleteKeyPair(id, [callback])

Deletes the specifies key if it exists.

15.16. addPrivateKey 159

web3.js Documentation, Release 1.0.0

15.17.1 Parameters

1. String - The key pair ID, returned by the creation functions (shh.newKeyPair and shh.
addPrivateKey).
2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.17.2 Returns

Boolean - true on success, error on failure.

15.17.3 Example

web3.shh.deleteKeyPair(
˓→'3e22b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f')

.then(console.log);
> true

15.18 hasKeyPair

web3.shh.hasKeyPair(id, [callback])

Checks if the whisper node has a private key of a key pair matching the given ID.

15.18.1 Parameters

1. String - The key pair ID, returned by the creation functions (shh.newKeyPair and shh.
addPrivateKey).
2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.18.2 Returns

Boolean - true on if the key pair exist in the node, false if not. Error on failure.

15.18.3 Example

web3.shh.hasKeyPair('fe22b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f
˓→')

.then(console.log);
> true

160 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

15.19 getPublicKey

web3.shh.getPublicKey(id, [callback])

Returns the public key for a key pair ID.

15.19.1 Parameters

1. String - The key pair ID, returned by the creation functions (shh.newKeyPair and shh.
addPrivateKey).
2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.19.2 Returns

String - Public key on success and an error on failure.

15.19.3 Example

web3.shh.getPublicKey(
˓→'3e22b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f')

.then(console.log);
>
˓→"0x04d1574d4eab8f3dde4d2dc7ed2c4d699d77cbbdd09167b8fffa099652ce4df00c4c6e0263eafe05007a46fdf0c8d32b

˓→"

15.20 getPrivateKey

web3.shh.getPrivateKey(id, [callback])

Returns the private key for a key pair ID.

15.20.1 Parameters

1. String - The key pair ID, returned by the creation functions (shh.newKeyPair and shh.
addPrivateKey).
2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.20.2 Returns

String - Private key on success and an error on failure.

15.19. getPublicKey 161

web3.js Documentation, Release 1.0.0

15.20.3 Example

web3.shh.getPrivateKey(
˓→'3e22b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f')

.then(console.log);
> "0x234234e22b9ffc2387e18636e0534534a3d0c56b0243567432453264c16e78a2adc"

15.21 newSymKey

web3.shh.newSymKey([callback])

Generates a random symmetric key and stores it under an ID, which is then returned. Will be used for encrypting and
decrypting of messages where the sym key is known to both parties.

15.21.1 Parameters

1. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.21.2 Returns

String - Key ID on success and an error on failure.

15.21.3 Example

web3.shh.newSymKey()
.then(console.log);
> "cec94d139ff51d7df1d228812b90c23ec1f909afa0840ed80f1e04030bb681e4"

15.22 addSymKey

web3.shh.addSymKey(symKey, [callback])

Stores the key, and returns its ID.

15.22.1 Parameters

1. String - The raw key for symmetric encryption as HEX bytes.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.22.2 Returns

String - Key ID on success and an error on failure.

162 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

15.22.3 Example

web3.shh.addSymKey('0x5e11b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f
˓→')

.then(console.log);
> "fea94d139ff51d7df1d228812b90c23ec1f909afa0840ed80f1e04030bb681e4"

15.23 generateSymKeyFromPassword

web3.shh.generateSymKeyFromPassword(password, [callback])

Generates the key from password, stores it, and returns its ID.

15.23.1 Parameters

1. String - A password to generate the sym key from.

2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.23.2 Returns

String - Key ID on success and an error on failure.

15.23.3 Example

web3.shh.generateSymKeyFromPassword('Never use this password - password!')

.then(console.log);
> "2e57b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f"

15.24 hasSymKey

web3.shh.hasSymKey(id, [callback])

Checks if there is a symmetric key stored with the given ID.

15.24.1 Parameters

1. String - The key pair ID, returned by the creation functions (shh.newSymKey, shh.addSymKey or
shh.generateSymKeyFromPassword).
2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.23. generateSymKeyFromPassword 163

web3.js Documentation, Release 1.0.0

15.24.2 Returns

Boolean - true on if the symmetric key exist in the node, false if not. Error on failure.

15.24.3 Example

web3.shh.hasSymKey('f6dcf21ed6a17bd78d8c4c63195ab997b3b65ea683705501eae82d32667adc92')
.then(console.log);
> true

15.25 getSymKey

web3.shh.getSymKey(id, [callback])

Returns the symmetric key associated with the given ID.

15.25.1 Parameters

1. String - The key pair ID, returned by the creation functions (shh.newKeyPair and shh.
addPrivateKey).
2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.25.2 Returns

String - The raw symmetric key on success and an error on failure.

15.25.3 Example

web3.shh.getSymKey('af33b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f')
.then(console.log);
> "0xa82a520aff70f7a989098376e48ec128f25f767085e84d7fb995a9815eebff0a"

15.26 deleteSymKey

web3.shh.deleteSymKey(id, [callback])

Deletes the symmetric key associated with the given ID.

164 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

15.26.1 Parameters

1. String - The key pair ID, returned by the creation functions (shh.newKeyPair and shh.
addPrivateKey).
2. Function - (optional) Optional callback, returns an error object as first parameter and the result as second.

15.26.2 Returns

Boolean - true on if the symmetric key was deleted, error on failure.

15.26.3 Example

web3.shh.deleteSymKey(
˓→'bf31b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f')

.then(console.log);
> true

15.27 post

web3.shh.post(object [, callback])

This method should be called, when we want to post whisper a message to the network.

15.27.1 Parameters

1. Object - The post object:

• symKeyID - String (optional): ID of symmetric key for message encryption (Either symKeyID
or pubKey must be present. Can not be both.).
• pubKey - String (optional): The public key for message encryption (Either symKeyID or
pubKey must be present. Can not be both.).
• sig - String (optional): The ID of the signing key.
• ttl - Number: Time-to-live in seconds.
• topic - String: 4 Bytes (mandatory when key is symmetric): Message topic.
• payload - String: The payload of the message to be encrypted.
• padding - Number (optional): Padding (byte array of arbitrary length).
• powTime - Number (optional)?: Maximal time in seconds to be spent on proof of work.
• powTarget - Number (optional)?: Minimal PoW target required for this message.
• targetPeer - Number (optional): Peer ID (for peer-to-peer message only).
2. callback - Function: (optional) Optional callback, returns an error object as first parameter and the result
as second.

15.27. post 165

web3.js Documentation, Release 1.0.0

15.27.2 Returns

Promise - returns a promise. Upon success, the then function will be passed a string representing the hash of the
sent message. On error, the catch function will be passed a string containing the reason for the error.

15.27.3 Example

var identities = [];

var subscription = null;

Promise.all([
web3.shh.newSymKey().then((id) => {identities.push(id);}),
web3.shh.newKeyPair().then((id) => {identities.push(id);})

]).then(() => {

// will receive also its own message send, below

subscription = shh.subscribe("messages", {
symKeyID: identities[0],
topics: ['0xffaadd11']
}).on('data', console.log);

}).then(() => {
web3.shh.post({
symKeyID: identities[0], // encrypts using the sym key ID
sig: identities[1], // signs the message using the keyPair ID
ttl: 10,
topic: '0xffaadd11',
payload: '0xffffffdddddd1122',
powTime: 3,
powTarget: 0.5
}).then(h => console.log(`Message with hash ${h} was successfuly sent`))
.catch(err => console.log("Error: ", err));
});

15.28 subscribe

web3.shh.subscribe('messages', options [, callback])

Subscribe for incoming whisper messages.

15.28.1 Parameters

1. "messages" - String: Type of the subscription.

2. Object - The subscription options:
• symKeyID - String: ID of symmetric key for message decryption.
• privateKeyID - String: ID of private (asymmetric) key for message decryption.
• sig - String (optional): Public key of the signature, to verify.

166 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

• topics- Array (optional when “privateKeyID” key is given): Filters messages by this topic(s).
Each topic must be a 4 bytes HEX string.
• minPow - Number (optional): Minimal PoW requirement for incoming messages.
• allowP2P - Boolean (optional): Indicates if this filter allows processing of direct peer-to-peer
messages (which are not to be forwarded any further, because they might be expired). This might
be the case in some very rare cases, e.g. if you intend to communicate to MailServers, etc.
3. callback - Function: (optional) Optional callback, returns an error object as first parameter and the result
as second. Will be called for each incoming subscription, and the subscription itself as 3 parameter.

15.28.2 Notification Returns

Object - The incoming message:

• hash - String: Hash of the enveloped message.
• sig - String: Public key which signed this message.
• recipientPublicKey - String: The recipients public key.
• timestamp - String: Unix timestamp of the message genertion.
• ttl - Number: Time-to-live in seconds.
• topic - String: 4 Bytes HEX string message topic.
• payload - String: Decrypted payload.
• padding - Number: Optional padding (byte array of arbitrary length).
• pow - Number: Proof of work value.

15.28.3 Example

web3.shh.subscribe('messages', {
symKeyID: 'bf31b9ffc2387e18636e0a3d0c56b023264c16e78a2adcba1303cefc685e610f',
sig:
˓→'0x04d1574d4eab8f3dde4d2dc7ed2c4d699d77cbbdd09167b8fffa099652ce4df00c4c6e0263eafe05007a46fdf0c8d32b

˓→',

ttl: 20,
topics: ['0xffddaa11'],
minPow: 0.8,
}, function(error, message, subscription){

console.log(message);
> {
"hash": "0x4158eb81ad8e30cfcee67f20b1372983d388f1243a96e39f94fd2797b1e9c78e",
"padding":
˓→"0xc15f786f34e5cef0fef6ce7c1185d799ecdb5ebca72b3310648c5588db2e99a0d73301c7a8d90115a91213f0bc9c7229

˓→",

"payload": "0xdeadbeaf",
"pow": 0.5371803278688525,
"recipientPublicKey": null,
"sig": null,
"timestamp": 1496991876,
"topic": "0x01020304",
"ttl": 50
(continues on next page)

15.28. subscribe 167

web3.js Documentation, Release 1.0.0

(continued from previous page)

}
})
// or
.on('data', function(message){ ... });

15.29 clearSubscriptions

web3.shh.clearSubscriptions()

Resets subscriptions.

Note: This will not reset subscriptions from other packages like web3-eth, as they use their own requestManager.

15.29.1 Parameters

1. Boolean: If true it keeps the "syncing" subscription.

15.29.2 Returns

Boolean

15.29.3 Example

web3.shh.subscribe('messages', {...} ,function(){ ... });

...

web3.shh.clearSubscriptions();

15.30 newMessageFilter

web3.shh.newMessageFilter(options)

Create a new filter within the node. This filter can be used to poll for new messages that match the set of criteria.

15.30.1 Parameters

1. Object: See web3.shh.subscribe() options for details.

168 Chapter 15. web3.shh

 web3.js Documentation, Release 1.0.0

15.30.2 Returns

String: The filter ID.

15.30.3 Example

web3.shh.newMessageFilter()
.then(console.log);
> "2b47fbafb3cce24570812a82e6e93cd9e2551bbc4823f6548ff0d82d2206b326"

15.31 deleteMessageFilter

web3.shh.deleteMessageFilter(id)

Deletes a message filter in the node.

15.31.1 Parameters

1. String: The filter ID created with shh.newMessageFilter().

15.31.2 Returns

Boolean: true on success, error on failure.

15.31.3 Example

web3.shh.deleteMessageFilter(
˓→'2b47fbafb3cce24570812a82e6e93cd9e2551bbc4823f6548ff0d82d2206b326')

.then(console.log);
> true

15.32 getFilterMessages

web3.shh.getFilterMessages(id)

Retrieve messages that match the filter criteria and are received between the last time this function was called and now.

15.32.1 Parameters

1. String: The filter ID created with shh.newMessageFilter().

15.31. deleteMessageFilter 169

web3.js Documentation, Release 1.0.0

15.32.2 Returns

Array: Returns an array of message objects like web3.shh.subscribe() notification returns

15.32.3 Example

web3.shh.getFilterMessages(
˓→'2b47fbafb3cce24570812a82e6e93cd9e2551bbc4823f6548ff0d82d2206b326')

.then(console.log);
> [{
"hash": "0x4158eb81ad8e30cfcee67f20b1372983d388f1243a96e39f94fd2797b1e9c78e",
"padding":
˓→"0xc15f786f34e5cef0fef6ce7c1185d799ecdb5ebca72b3310648c5588db2e99a0d73301c7a8d90115a91213f0bc9c7229

˓→",

"payload": "0xdeadbeaf",
"pow": 0.5371803278688525,
"recipientPublicKey": null,
"sig": null,
"timestamp": 1496991876,
"topic": "0x01020304",
"ttl": 50
},{...}]

170 Chapter 15. web3.shh

 CHAPTER 16

web3.utils

This package provides utility functions for Ethereum dapps and other web3.js packages.

16.1 Bloom Filters

16.1.1 What are bloom filters?

A Bloom filter is a probabilistic, space-efficient data structure used for fast checks of set membership. That probably
doesn’t mean much to you yet, and so let’s explore how bloom filters might be used.
Imagine that we have some large set of data, and we want to be able to quickly test if some element is currently in that
set. The naive way of checking might be to query the set to see if our element is in there. That’s probably fine if our
data set is relatively small. Unfortunately, if our data set is really big, this search might take a while. Luckily, we have
tricks to speed things up in the ethereum world!
A bloom filter is one of these tricks. The basic idea behind the Bloom filter is to hash each new element that goes into
the data set, take certain bits from this hash, and then use those bits to fill in parts of a fixed-size bit array (e.g. set
certain bits to 1). This bit array is called a bloom filter.
Later, when we want to check if an element is in the set, we simply hash the element and check that the right bits are
in the bloom filter. If at least one of the bits is 0, then the element definitely isn’t in our data set! If all of the bits are
1, then the element might be in the data set, but we need to actually query the database to be sure. So we might have
false positives, but we’ll never have false negatives. This can greatly reduce the number of database queries we have
to make.
Real Life Example
A ethereum real life example in where this is useful is if you want to update a users balance on every new block so
it stays as close to real time as possible. Without using a bloom filter on every new block you would have to force
the balances even if that user may not of had any activity within that block. But if you use the logBlooms from
the block you can test the bloom filter against the users ethereum address before you do any more slow operations,
this will dramatically decrease the amount of calls you do as you will only be doing those extra operations if that

171
web3.js Documentation, Release 1.0.0

ethereum address is within that block (minus the false positives outcome which will be negligible). This will be highly
performant for your app.

16.1.2 Functions

• web3.utils.isBloom
• web3.utils.isUserEthereumAddressInBloom
• web3.utils.isContractAddressInBloom
• web3.utils.isTopic
• web3.utils.isTopicInBloom
• web3.utils.isInBloom

Note: Please raise any issues here

16.2 randomHex

web3.utils.randomHex(size)

The randomHex library to generate cryptographically strong pseudo-random HEX strings from a given byte size.

16.2.1 Parameters

1. size - Number: The byte size for the HEX string, e.g. 32 will result in a 32 bytes HEX string with 64
characters preficed with “0x”.

16.2.2 Returns

String: The generated random HEX string.

16.2.3 Example

web3.utils.randomHex(32)
> "0xa5b9d60f32436310afebcfda832817a68921beb782fabf7915cc0460b443116a"

web3.utils.randomHex(4)
> "0x6892ffc6"

web3.utils.randomHex(2)
> "0x99d6"

web3.utils.randomHex(1)
> "0x9a"

(continues on next page)

172 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

(continued from previous page)

web3.utils.randomHex(0)
> "0x"

16.3 _

web3.utils._()

The underscore library for many convenience JavaScript functions.

See the underscore API reference for details.

16.3.1 Example

var _ = web3.utils._;

_.union([1,2],[3]);
> [1,2,3]

_.each({my: 'object'}, function(value, key){ ... })

...

16.4 BN

web3.utils.BN(mixed)

The BN.js library for calculating with big numbers in JavaScript. See the BN.js documentation for details.

Note: For safe conversion of many types, incl BigNumber.js use utils.toBN

16.4.1 Parameters

1. mixed - String|Number: A number, number string or HEX string to convert to a BN object.

16.4.2 Returns

Object: The BN.js instance.

16.4.3 Example

16.3. _ 173
web3.js Documentation, Release 1.0.0

var BN = web3.utils.BN;

new BN(1234).toString();
> "1234"

new BN('1234').add(new BN('1')).toString();

> "1235"

new BN('0xea').toString();
> "234"

16.5 isBN

web3.utils.isBN(bn)

Checks if a given value is a BN.js instance.

16.5.1 Parameters

1. bn - Object: An BN.js instance.

16.5.2 Returns

Boolean

16.5.3 Example

var number = new BN(10);

web3.utils.isBN(number);
> true

16.6 isBigNumber

web3.utils.isBigNumber(bignumber)

Checks if a given value is a BigNumber.js instance.

16.6.1 Parameters

1. bignumber - Object: A BigNumber.js instance.

174 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

16.6.2 Returns

Boolean

16.6.3 Example

var number = new BigNumber(10);

web3.utils.isBigNumber(number);
> true

16.7 sha3

web3.utils.sha3(string)
web3.utils.keccak256(string) // ALIAS

Will calculate the sha3 of the input.

Note: To mimic the sha3 behaviour of solidity use soliditySha3

16.7.1 Parameters

1. string - String: A string to hash.

16.7.2 Returns

String: the result hash.

16.7.3 Example

web3.utils.sha3('234'); // taken as string

> "0xc1912fee45d61c87cc5ea59dae311904cd86b84fee17cc96966216f811ce6a79"

web3.utils.sha3(new BN('234'));
> "0xbc36789e7a1e281436464229828f817d6612f7b477d66591ff96a9e064bcc98a"

web3.utils.sha3(234);
> null // can't calculate the has of a number

web3.utils.sha3(0xea); // same as above, just the HEX representation of the number

> null

web3.utils.sha3('0xea'); // will be converted to a byte array first, and then hashed

> "0x2f20677459120677484f7104c76deb6846a2c071f9b3152c103bb12cd54d1a4a"

16.7. sha3 175

web3.js Documentation, Release 1.0.0

16.8 soliditySha3

web3.utils.soliditySha3(param1 [, param2, ...])

Will calculate the sha3 of given input parameters in the same way solidity would. This means arguments will be ABI
converted and tightly packed before being hashed.

16.8.1 Parameters

1. paramX - Mixed: Any type, or an object with {type: 'uint', value: '123456'} or {t:
'bytes', v: '0xfff456'}. Basic types are autodetected as follows:
• String non numerical UTF-8 string is interpreted as string.
• String|Number|BN|HEX positive number is interpreted as uint256.
• String|Number|BN negative number is interpreted as int256.
• Boolean as bool.
• String HEX string with leading 0x is interpreted as bytes.
• HEX HEX number representation is interpreted as uint256.

16.8.2 Returns

String: the result hash.

16.8.3 Example

web3.utils.soliditySha3('234564535', '0xfff23243', true, -10);

// auto detects: uint256, bytes, bool, int256
> "0x3e27a893dc40ef8a7f0841d96639de2f58a132be5ae466d40087a2cfa83b7179"

web3.utils.soliditySha3('Hello!%'); // auto detects: string

> "0x661136a4267dba9ccdf6bfddb7c00e714de936674c4bdb065a531cf1cb15c7fc"

web3.utils.soliditySha3('234'); // auto detects: uint256

> "0x61c831beab28d67d1bb40b5ae1a11e2757fa842f031a2d0bc94a7867bc5d26c2"

web3.utils.soliditySha3(0xea); // same as above

> "0x61c831beab28d67d1bb40b5ae1a11e2757fa842f031a2d0bc94a7867bc5d26c2"

web3.utils.soliditySha3(new BN('234')); // same as above

> "0x61c831beab28d67d1bb40b5ae1a11e2757fa842f031a2d0bc94a7867bc5d26c2"

web3.utils.soliditySha3({type: 'uint256', value: '234'})); // same as above

> "0x61c831beab28d67d1bb40b5ae1a11e2757fa842f031a2d0bc94a7867bc5d26c2"

web3.utils.soliditySha3({t: 'uint', v: new BN('234')})); // same as above

> "0x61c831beab28d67d1bb40b5ae1a11e2757fa842f031a2d0bc94a7867bc5d26c2"

(continues on next page)

176 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

(continued from previous page)

web3.utils.soliditySha3('0x407D73d8a49eeb85D32Cf465507dd71d507100c1');
> "0x4e8ebbefa452077428f93c9520d3edd60594ff452a29ac7d2ccc11d47f3ab95b"

web3.utils.soliditySha3({t: 'bytes', v: '0x407D73d8a49eeb85D32Cf465507dd71d507100c1'}

˓→);

> "0x4e8ebbefa452077428f93c9520d3edd60594ff452a29ac7d2ccc11d47f3ab95b" // same result

˓→as above

web3.utils.soliditySha3({t: 'address', v: '0x407D73d8a49eeb85D32Cf465507dd71d507100c1

˓→'});

> "0x4e8ebbefa452077428f93c9520d3edd60594ff452a29ac7d2ccc11d47f3ab95b" // same as

˓→above, but will do a checksum check, if its multi case

web3.utils.soliditySha3({t: 'bytes32', v: '0x407D73d8a49eeb85D32Cf465507dd71d507100c1

˓→'});

> "0x3c69a194aaf415ba5d6afca734660d0a3d45acdc05d54cd1ca89a8988e7625b4" // different

˓→result as above

web3.utils.soliditySha3({t: 'string', v: 'Hello!%'}, {t: 'int8', v:-23}, {t: 'address

˓→', v: '0x85F43D8a49eeB85d32Cf465507DD71d507100C1d'});

> "0xa13b31627c1ed7aaded5aecec71baf02fe123797fffd45e662eac8e06fbe4955"

16.9 isHex

web3.utils.isHex(hex)

Checks if a given string is a HEX string.

16.9.1 Parameters

1. hex - String|HEX: The given HEX string.

16.9.2 Returns

Boolean

16.9.3 Example

web3.utils.isHex('0xc1912');
> true

web3.utils.isHex(0xc1912);
> true

web3.utils.isHex('c1912');
(continues on next page)

16.9. isHex 177

web3.js Documentation, Release 1.0.0

(continued from previous page)

> true

web3.utils.isHex(345);
> true // this is tricky, as 345 can be a a HEX representation or a number, be
˓→careful when not having a 0x in front!

web3.utils.isHex('0xZ1912');
> false

web3.utils.isHex('Hello');
> false

16.10 isHexStrict

web3.utils.isHexStrict(hex)

Checks if a given string is a HEX string. Difference to web3.utils.isHex() is that it expects HEX to be prefixed
with 0x.

16.10.1 Parameters

1. hex - String|HEX: The given HEX string.

16.10.2 Returns

Boolean

16.10.3 Example

web3.utils.isHexStrict('0xc1912');
> true

web3.utils.isHexStrict(0xc1912);
> false

web3.utils.isHexStrict('c1912');
> false

web3.utils.isHexStrict(345);
> false // this is tricky, as 345 can be a a HEX representation or a number, be
˓→careful when not having a 0x in front!

web3.utils.isHexStrict('0xZ1912');
> false

web3.utils.isHex('Hello');
> false

178 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

16.11 isAddress

web3.utils.isAddress(address)

Checks if a given string is a valid Ethereum address. It will also check the checksum, if the address has upper and
lowercase letters.

16.11.1 Parameters

1. address - String: An address string.

16.11.2 Returns

Boolean

16.11.3 Example

web3.utils.isAddress('0xc1912fee45d61c87cc5ea59dae31190fffff232d');
> true

web3.utils.isAddress('c1912fee45d61c87cc5ea59dae31190fffff232d');
> true

web3.utils.isAddress('0XC1912FEE45D61C87CC5EA59DAE31190FFFFF232D');
> true // as all is uppercase, no checksum will be checked

web3.utils.isAddress('0xc1912fEE45d61C87Cc5EA59DaE31190FFFFf232d');
> true

web3.utils.isAddress('0xC1912fEE45d61C87Cc5EA59DaE31190FFFFf232d');
> false // wrong checksum

16.12 toChecksumAddress

web3.utils.toChecksumAddress(address)

Will convert an upper or lowercase Ethereum address to a checksum address.

16.12.1 Parameters

1. address - String: An address string.

16.12.2 Returns

String: The checksum address.

16.11. isAddress 179

web3.js Documentation, Release 1.0.0

16.12.3 Example

web3.utils.toChecksumAddress('0xc1912fee45d61c87cc5ea59dae31190fffff2323');
> "0xc1912fEE45d61C87Cc5EA59DaE31190FFFFf232d"

web3.utils.toChecksumAddress('0XC1912FEE45D61C87CC5EA59DAE31190FFFFF232D');
> "0xc1912fEE45d61C87Cc5EA59DaE31190FFFFf232d" // same as above

16.13 checkAddressChecksum

web3.utils.checkAddressChecksum(address)

Checks the checksum of a given address. Will also return false on non-checksum addresses.

16.13.1 Parameters

1. address - String: An address string.

16.13.2 Returns

Boolean: true when the checksum of the address is valid, false if its not a checksum address, or the checksum
is invalid.

16.13.3 Example

web3.utils.checkAddressChecksum('0xc1912fEE45d61C87Cc5EA59DaE31190FFFFf232d');
> true

16.14 toHex

web3.utils.toHex(mixed)

Will auto convert any given value to HEX. Number strings will interpreted as numbers. Text strings will be interpreted
as UTF-8 strings.

16.14.1 Parameters

1. mixed - String|Number|BN|BigNumber: The input to convert to HEX.

16.14.2 Returns

String: The resulting HEX string.

180 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

16.14.3 Example

web3.utils.toHex('234');
> "0xea"

web3.utils.toHex(234);
> "0xea"

web3.utils.toHex(new BN('234'));
> "0xea"

web3.utils.toHex(new BigNumber('234'));
> "0xea"

web3.utils.toHex('I have 100C');

> "0x49206861766520313030e282ac"

16.15 toBN

web3.utils.toBN(number)

Will safely convert any given value (including BigNumber.js instances) into a BN.js instance, for handling big numbers
in JavaScript.

Note: For just the BN.js class use utils.BN

16.15.1 Parameters

1. number - String|Number|HEX: Number to convert to a big number.

16.15.2 Returns

Object: The BN.js instance.

16.15.3 Example

web3.utils.toBN(1234).toString();
> "1234"

web3.utils.toBN('1234').add(web3.utils.toBN('1')).toString();
> "1235"

web3.utils.toBN('0xea').toString();
> "234"

16.15. toBN 181

web3.js Documentation, Release 1.0.0

16.16 hexToNumberString

web3.utils.hexToNumberString(hex)

Returns the number representation of a given HEX value as a string.

16.16.1 Parameters

1. hexString - String|HEX: A string to hash.

16.16.2 Returns

String: The number as a string.

16.16.3 Example

web3.utils.hexToNumberString('0xea');
> "234"

16.17 hexToNumber

web3.utils.hexToNumber(hex)
web3.utils.toDecimal(hex) // ALIAS, deprecated

Returns the number representation of a given HEX value.

Note: This is not useful for big numbers, rather use utils.toBN instead.

16.17.1 Parameters

1. hexString - String|HEX: A string to hash.

16.17.2 Returns

Number

16.17.3 Example

web3.utils.hexToNumber('0xea');
> 234

182 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

16.18 numberToHex

web3.utils.numberToHex(number)
web3.utils.fromDecimal(number) // ALIAS, deprecated

Returns the HEX representation of a given number value.

16.18.1 Parameters

1. number - String|Number|BN|BigNumber: A number as string or number.

16.18.2 Returns

String: The HEX value of the given number.

16.18.3 Example

web3.utils.numberToHex('234');
> '0xea'

16.19 hexToUtf8

web3.utils.hexToUtf8(hex)
web3.utils.hexToString(hex) // ALIAS
web3.utils.toUtf8(hex) // ALIAS, deprecated

Returns the UTF-8 string representation of a given HEX value.

16.19.1 Parameters

1. hex - String: A HEX string to convert to a UTF-8 string.

16.19.2 Returns

String: The UTF-8 string.

16.19.3 Example

web3.utils.hexToUtf8('0x49206861766520313030e282ac');
> "I have 100C"

16.18. numberToHex 183

web3.js Documentation, Release 1.0.0

16.20 hexToAscii

web3.utils.hexToAscii(hex)
web3.utils.toAscii(hex) // ALIAS, deprecated

Returns the ASCII string representation of a given HEX value.

16.20.1 Parameters

1. hex - String: A HEX string to convert to a ASCII string.

16.20.2 Returns

String: The ASCII string.

16.20.3 Example

web3.utils.hexToAscii('0x4920686176652031303021');
> "I have 100!"

16.21 utf8ToHex

web3.utils.utf8ToHex(string)
web3.utils.stringToHex(string) // ALIAS
web3.utils.fromUtf8(string) // ALIAS, deprecated

Returns the HEX representation of a given UTF-8 string.

16.21.1 Parameters

1. string - String: A UTF-8 string to convert to a HEX string.

16.21.2 Returns

String: The HEX string.

16.21.3 Example

web3.utils.utf8ToHex('I have 100C');

> "0x49206861766520313030e282ac"

184 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

16.22 asciiToHex

web3.utils.asciiToHex(string)
web3.utils.fromAscii(string) // ALIAS, deprecated

Returns the HEX representation of a given ASCII string.

16.22.1 Parameters

1. string - String: A ASCII string to convert to a HEX string.

16.22.2 Returns

String: The HEX string.

16.22.3 Example

web3.utils.asciiToHex('I have 100!');

> "0x4920686176652031303021"

16.23 hexToBytes

web3.utils.hexToBytes(hex)

Returns a byte array from the given HEX string.

16.23.1 Parameters

1. hex - String|HEX: A HEX to convert.

16.23.2 Returns

Array: The byte array.

16.23.3 Example

web3.utils.hexToBytes('0x000000ea');
> [ 0, 0, 0, 234 ]

web3.utils.hexToBytes(0x000000ea);
> [ 234 ]

16.22. asciiToHex 185

web3.js Documentation, Release 1.0.0

16.24 bytesToHex

web3.utils.bytesToHex(byteArray)

Returns a HEX string from a byte array.

16.24.1 Parameters

1. byteArray - Array: A byte array to convert.

16.24.2 Returns

String: The HEX string.

16.24.3 Example

web3.utils.bytesToHex([ 72, 101, 108, 108, 111, 33, 36 ]);

> "0x48656c6c6f2125"

16.25 toWei

web3.utils.toWei(number [, unit])

Converts any ether value value into wei.

Note: “wei” are the smallest ethere unit, and you should always make calculations in wei and convert only for display
reasons.

16.25.1 Parameters

1. number - String|BN: The value.

2. unit - String (optional, defaults to "ether"): The ether to convert from. Possible units are:
• noether: ‘0’
• wei: ‘1’
• kwei: ‘1000’
• Kwei: ‘1000’
• babbage: ‘1000’
• femtoether: ‘1000’
• mwei: ‘1000000’
• Mwei: ‘1000000’

186 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

• lovelace: ‘1000000’
• picoether: ‘1000000’
• gwei: ‘1000000000’
• Gwei: ‘1000000000’
• shannon: ‘1000000000’
• nanoether: ‘1000000000’
• nano: ‘1000000000’
• szabo: ‘1000000000000’
• microether: ‘1000000000000’
• micro: ‘1000000000000’
• finney: ‘1000000000000000’
• milliether: ‘1000000000000000’
• milli: ‘1000000000000000’
• ether: ‘1000000000000000000’
• kether: ‘1000000000000000000000’
• grand: ‘1000000000000000000000’
• mether: ‘1000000000000000000000000’
• gether: ‘1000000000000000000000000000’
• tether: ‘1000000000000000000000000000000’

16.25.2 Returns

String|BN: If a string is given it returns a number string, otherwise a BN.js instance.

16.25.3 Example

web3.utils.toWei('1', 'ether');
> "1000000000000000000"

web3.utils.toWei('1', 'finney');
> "1000000000000000"

web3.utils.toWei('1', 'szabo');
> "1000000000000"

web3.utils.toWei('1', 'shannon');
> "1000000000"

16.25. toWei 187

web3.js Documentation, Release 1.0.0

16.26 fromWei

web3.utils.fromWei(number [, unit])

Converts any wei value into a ether value.

Note: “wei” are the smallest ethere unit, and you should always make calculations in wei and convert only for display
reasons.

16.26.1 Parameters

1. number - String|BN: The value in wei.

2. unit - String (optional, defaults to "ether"): The ether to convert to. Possible units are:
• noether: ‘0’
• wei: ‘1’
• kwei: ‘1000’
• Kwei: ‘1000’
• babbage: ‘1000’
• femtoether: ‘1000’
• mwei: ‘1000000’
• Mwei: ‘1000000’
• lovelace: ‘1000000’
• picoether: ‘1000000’
• gwei: ‘1000000000’
• Gwei: ‘1000000000’
• shannon: ‘1000000000’
• nanoether: ‘1000000000’
• nano: ‘1000000000’
• szabo: ‘1000000000000’
• microether: ‘1000000000000’
• micro: ‘1000000000000’
• finney: ‘1000000000000000’
• milliether: ‘1000000000000000’
• milli: ‘1000000000000000’
• ether: ‘1000000000000000000’
• kether: ‘1000000000000000000000’
• grand: ‘1000000000000000000000’
• mether: ‘1000000000000000000000000’

188 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

• gether: ‘1000000000000000000000000000’
• tether: ‘1000000000000000000000000000000’

16.26.2 Returns

String: It always returns a string number.

16.26.3 Example

web3.utils.fromWei('1', 'ether');
> "0.000000000000000001"

web3.utils.fromWei('1', 'finney');
> "0.000000000000001"

web3.utils.fromWei('1', 'szabo');
> "0.000000000001"

web3.utils.fromWei('1', 'shannon');
> "0.000000001"

16.27 unitMap

web3.utils.unitMap

Shows all possible ether value and their amount in wei.

16.27.1 Return value

• Object with the following properties:

– noether: ‘0’
– wei: ‘1’
– kwei: ‘1000’
– Kwei: ‘1000’
– babbage: ‘1000’
– femtoether: ‘1000’
– mwei: ‘1000000’
– Mwei: ‘1000000’
– lovelace: ‘1000000’
– picoether: ‘1000000’
– gwei: ‘1000000000’
– Gwei: ‘1000000000’

16.27. unitMap 189

web3.js Documentation, Release 1.0.0

– shannon: ‘1000000000’
– nanoether: ‘1000000000’
– nano: ‘1000000000’
– szabo: ‘1000000000000’
– microether: ‘1000000000000’
– micro: ‘1000000000000’
– finney: ‘1000000000000000’
– milliether: ‘1000000000000000’
– milli: ‘1000000000000000’
– ether: ‘1000000000000000000’
– kether: ‘1000000000000000000000’
– grand: ‘1000000000000000000000’
– mether: ‘1000000000000000000000000’
– gether: ‘1000000000000000000000000000’
– tether: ‘1000000000000000000000000000000’

16.27.2 Example

web3.utils.unitMap
> {
noether: '0',
wei: '1',
kwei: '1000',
Kwei: '1000',
babbage: '1000',
femtoether: '1000',
mwei: '1000000',
Mwei: '1000000',
lovelace: '1000000',
picoether: '1000000',
gwei: '1000000000',
Gwei: '1000000000',
shannon: '1000000000',
nanoether: '1000000000',
nano: '1000000000',
szabo: '1000000000000',
microether: '1000000000000',
micro: '1000000000000',
finney: '1000000000000000',
milliether: '1000000000000000',
milli: '1000000000000000',
ether: '1000000000000000000',
kether: '1000000000000000000000',
grand: '1000000000000000000000',
mether: '1000000000000000000000000',
gether: '1000000000000000000000000000',
tether: '1000000000000000000000000000000'
}

190 Chapter 16. web3.utils

 web3.js Documentation, Release 1.0.0

16.28 padLeft

web3.utils.padLeft(string, characterAmount [, sign])

web3.utils.leftPad(string, characterAmount [, sign]) // ALIAS

Adds a padding on the left of a string, Useful for adding paddings to HEX strings.

16.28.1 Parameters

1. string - String: The string to add padding on the left.

2. characterAmount - Number: The number of characters the total string should have.
3. sign - String (optional): The character sign to use, defaults to "0".

16.28.2 Returns

String: The padded string.

16.28.3 Example

web3.utils.padLeft('0x3456ff', 20);
> "0x000000000000003456ff"

web3.utils.padLeft(0x3456ff, 20);
> "0x000000000000003456ff"

web3.utils.padLeft('Hello', 20, 'x');

> "xxxxxxxxxxxxxxxHello"

16.29 padRight

web3.utils.padRight(string, characterAmount [, sign])

web3.utils.rightPad(string, characterAmount [, sign]) // ALIAS

Adds a padding on the right of a string, Useful for adding paddings to HEX strings.

16.29.1 Parameters

1. string - String: The string to add padding on the right.

2. characterAmount - Number: The number of characters the total string should have.
3. sign - String (optional): The character sign to use, defaults to "0".

16.28. padLeft 191

web3.js Documentation, Release 1.0.0

16.29.2 Returns

String: The padded string.

16.29.3 Example

web3.utils.padRight('0x3456ff', 20);
> "0x3456ff00000000000000"

web3.utils.padRight(0x3456ff, 20);
> "0x3456ff00000000000000"

web3.utils.padRight('Hello', 20, 'x');

> "Helloxxxxxxxxxxxxxxx"

16.30 toTwosComplement

web3.utils.toTwosComplement(number)

Converts a negative numer into a two’s complement.

16.30.1 Parameters

1. number - Number|String|BigNumber: The number to convert.

16.30.2 Returns

String: The converted hex string.

16.30.3 Example

web3.utils.toTwosComplement('-1');
> "0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"

web3.utils.toTwosComplement(-1);
> "0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"

web3.utils.toTwosComplement('0x1');
> "0x0000000000000000000000000000000000000000000000000000000000000001"

web3.utils.toTwosComplement(-15);
> "0xfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff1"

web3.utils.toTwosComplement('-0x1');
> "0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"

192 Chapter 16. web3.utils

 Index

B
bower, 3

C
contract deploy, 64

J
JSON interface, 57

M
meteor, 3

N
npm, 3

193