Scribd Logo
Upload

Welcome to Scribd!

  • 56 views

    Description Packaging Shelf Life Coverage

    Uploaded by

    jet toledo
    LANKO 731 LANKOREP STRUCTURE PH is a fiber-reinforced non-shrink mortar for repairing concrete structures and reinforcing weakened structures with application thicknesses between 5mm to 50mm. It has high mechanical strength and excellent resistance to sea water and sulphated waters. The product is mixed with water on site and applied in layers using a trowel or spray for repairs. Substrate preparation and proper application are required for best performance of the mortar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Description Packaging Shelf Life Coverage

    Uploaded by

    jet toledo
    56 views2 pages
    LANKO 731 LANKOREP STRUCTURE PH is a fiber-reinforced non-shrink mortar for repairing concrete structures and reinforcing weakened structures with application thicknesses between 5mm to 50mm. It has high mechanical strength and excellent resistance to sea water and sulphated waters. The product is mixed with water on site and applied in layers using a trowel or spray for repairs. Substrate preparation and proper application are required for best performance of the mortar.

    Original Description:

    Lanko 31

    Original Title

    L731

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    LANKO 731 LANKOREP STRUCTURE PH is a fiber-reinforced non-shrink mortar for repairing concrete structures and reinforcing weakened structures with application thicknesses between 5mm to 50mm. It has high mechanical strength and excellent resistance to sea water and sulphated waters. The product is mixed with water on site and applied in layers using a trowel or spray for repairs. Substrate preparation and proper application are required for best performance of the mortar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    56 views2 pages

    Description Packaging Shelf Life Coverage

    Uploaded by

    jet toledo
    LANKO 731 LANKOREP STRUCTURE PH is a fiber-reinforced non-shrink mortar for repairing concrete structures and reinforcing weakened structures with application thicknesses between 5mm to 50mm. It has high mechanical strength and excellent resistance to sea water and sulphated waters. The product is mixed with water on site and applied in layers using a trowel or spray for repairs. Substrate preparation and proper application are required for best performance of the mortar.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    

     
      
    
          
      
         

    Description Coverage
    LANKO 731 LANKOREP STRUCTURE PH is a fiber-reinforced 2 kg /m2/mm
    non-shrink mortar for repair of concrete structures and
    reinforcement of weakened structures with application
    thickness of 5mm to 50mm.
    Packaging
    25kg bag
    Uses
    • Repair of concrete surfaces: spalling, honeycombing, Shelf Life
    stairnosing, ramp, etc. Store in a cool dry place. If properly stored in its original,
    • Concrete restructuring: pillars, slabs, posts, dams, aprons unopened container, product life is 12 months from the
    and spillways date of manufacture.
    • Reinforcement of weakened structures: balconies and
    cornices Precautions
    • Treatment of chamfers and seams prior to waterproofing • Temperature range for use: 10°C to 35°C.
    • Do not apply to a frozen or thawing substrate.
    Advantages • Chip/chisel the substrate before application.
    • High mechanical strength • After finishing, protect the mortar from drying out by
    • Excellent resistance to sea water & sulphated waters applying curing compound or any approved method
    of curing the concrete or dampening without soaking.
    Technical Data • Hydraulic binders, cement, sand or admixtures must
    not be added.
    Compressive Strength Days MPa PSI
    (23-25°C/90-100%RH) 7 30 – 45 4,350 – 6,525
    ASTM C109 28 45 – 65 6,525 – 9,425
    Setting Time
    (25°C/45-50%RH): C191
    (23-25°C/90-100% RH)
    Initial 2 - 2.5 hours
    Final 2.5 - 3.8 hours
    Linear Shrinkage
    (23-25°C/90-100% RH)
    ASTM C596
    28 Days ≤ 1,500 µ strain
    *Average laboratory values provided as a general guide.
    Specifications are subject to change without notification.
    Results shown are typical but reflect test procedure used. Actual
    field performances depend on installation method and
    site conditions.

    
      
      
      
             
     
       
       
         
    
     
              
     
      
    ­€
    ­
    €‚ƒ   
     
    
      
    
       
     „
    …†

    ƒ 
    … Œ  ˜ƒ¡——Ž–—Ž™žƒŽ’——Ž–—Ž™
     ˜ƒ†Ž‰——Ž–——‘

    
    
    †ƒ  €…‡…ˆ ›œ›…ˆ
    ‰‰‰
     Š‹‚‹… Œ Ž‘’‘ ‰‰‰‹ ™ž”‹˜™š ‹
     “”•–‰‰—”˜–‰‘™     ‹Ÿ … ˜ ‹  Ž”•‘
     šˆ “”•–‰‰—”˜–‰‰•  “”•–‰”‘–˜Ž‘—™‹“”•–‰‘¡—˜¡‰——
       ­
      šˆ “”•–‰‘¡—˜¡‰–‰
    
     
      
    
          
      
         

    How To Use Application:


    Substrate Preparation: • Apply a first batch of LANKO 731 LANKOREP
    STRUCTURE PH with a stainless steel trowel, pressing
    • Chip or remove loose and damaged concrete and laitance
    firmly to ensure bonding.
    using a point tool or chisel in order to obtain a clean,
    • Apply additional mortar layer by layer using spatula
    rough surface.
    or steel trowel, pressing firmly to obtain the desired
    • Clear out concrete around corroded rebars in order to
    overall thickness.
    create space for inserting the product behind and around
    • Finish the surface of the repaired surface using a
    them.
    stainless steel trowel or rubber float.
    • The boundaries of the surface to be repaired must be
    • For large surfaces, the mortar may be applied by
    clearly defined.
    machine spray.
    • The substrate must be free of all traces of grease and oil.
    • Brush, scrape or sandblast corroded rebars in order to
    remove non – adherent rust.
    • Dust off all surfaces to be repaired.
    • Damp the substrate prior to application.
    • If rebars are to be covered with less than 10 mm of
    mortar, they should be passivated using a slurry mix of
    LANKO 731 LANKOREP STRUCTURE PH and LANKO 751
    LANKOLATEX.

    Product Preparation:
    • For the product to be adequately mixed, machine – mix
    one 25 kg of LANKO 731 LANKOREP STRUCTURE PH with
    4.25 litres of clean water (i.e 17%water content) for 3
    minutes minimum until evenly distributed. Hand - mixing
    is unadvisable and might result in uneven distribution.
    • Workable life after mixing: approximately 45 minutes at
    20°C
    • No water must be added during application.

    
      
      
      
             
     
       
       
         
    
     
              
     
      
    ­€
    ­
    €‚ƒ   
     
    
      
    
       
     „
    …†

    ƒ 
    … Œ  ˜ƒ¡——Ž–—Ž™žƒŽ’——Ž–—Ž™
     ˜ƒ†Ž‰——Ž–——‘

    
    
    †ƒ  €…‡…ˆ ›œ›…ˆ
    ‰‰‰
     Š‹‚‹… Œ Ž‘’‘ ‰‰‰‹ ™ž”‹˜™š ‹
     “”•–‰‰—”˜–‰‘™     ‹Ÿ … ˜ ‹  Ž”•‘
     šˆ “”•–‰‰—”˜–‰‰•  “”•–‰”‘–˜Ž‘—™‹“”•–‰‘¡—˜¡‰——
       ­
      šˆ “”•–‰‘¡—˜¡‰–‰

    You might also like