The document contains a list of items and their preferred makes for a water treatment plant. It includes items like planetary gear boxes, hydraulic motors, cylinders, pumps, valves, and more. Another section provides calculations for the weight of a hydrocyclone treatment unit based on its diameter, slope, and material density. It also includes calculations for actuator cylinder sizing and air consumption based on flow rate, pressure differentials, and cylinder specifications.
The document contains a list of items and their preferred makes for a water treatment plant. It includes items like planetary gear boxes, hydraulic motors, cylinders, pumps, valves, and more. Another section provides calculations for the weight of a hydrocyclone treatment unit based on its diameter, slope, and material density. It also includes calculations for actuator cylinder sizing and air consumption based on flow rate, pressure differentials, and cylinder specifications.
The document contains a list of items and their preferred makes for a water treatment plant. It includes items like planetary gear boxes, hydraulic motors, cylinders, pumps, valves, and more. Another section provides calculations for the weight of a hydrocyclone treatment unit based on its diameter, slope, and material density. It also includes calculations for actuator cylinder sizing and air consumption based on flow rate, pressure differentials, and cylinder specifications.
The document contains a list of items and their preferred makes for a water treatment plant. It includes items like planetary gear boxes, hydraulic motors, cylinders, pumps, valves, and more. Another section provides calculations for the weight of a hydrocyclone treatment unit based on its diameter, slope, and material density. It also includes calculations for actuator cylinder sizing and air consumption based on flow rate, pressure differentials, and cylinder specifications.
AREA 490.8739 m2 VOLUME OF SHELL 1472.622 m3 11.25 1.874531 11.4051 VOLUME OF CONE 58.2767 m3 VOLUME OF DISCHARGE CONE 1.7308 m3 TOTAL VOLUME OF HRT 1532.6 m3 DENSITY OF SLURRY 1.17 t/m3 WEIGHT OF SLURRY 1793176 Kg 1793.176 tone SCFM/CFM CALCULATION FOR ACTUATOR CYLINDER SLNO DESCRIPTION VALUE UNIT REMARKS SLURRY LINE SIZE 10 CM FLOW RATE OF SLURRY 50 M3/HR PRESSURE 2 BAR AREA OF PIPE 78.54 CM2 FORCE ACTING TO FLANGE 157.08 KG
INLET PRESSURE 1.50 BAR
OUTLET PRESSURE OF CYLINDER CONSIDERED 7.5 BAR TIME CONSIDERED TO CLOSE/OPEN 5 SEC THRUST=PRESSURE *AREA *EFFICIENCY DIAMETER OF CYLINDER 6.1 CM
BORE SELECTED BASED ON STANDARD 6.3 CM SELECT FROM CHART
AREA 31.1725 CM2 PRESSURE ACTAUL IS 5.59895 BAR TOTAL PRESSURE 7.10 BAR PRESSURE DROP 0.40 BAR CYLINDER STROKE CONSIDERED 100 MM 311.725 CM3 0.31172 LITRES AS PER BOYLES LAW P1V1=P2V2 P1 7.10 BAR P2 1.00 BAR ATMOSPHERIC V1 0.312 LITRES V2 2.52464 LITRES
