Scribd Logo
Upload

Welcome to Scribd!

  • 95 views

    Quick Start Guide: 1. Notes

    Uploaded by

    robert orecis
    This document provides a quick start guide for setting up a digital video recorder (DVR). It includes instructions on packing check, HDD installation, rear panel interfaces, startup and shutdown, login, network settings, DDNS and UPnP functions, recording, and playback. The guide outlines connecting monitors and hard drives, navigating the system menu, configuring network settings for remote access, and basic recording and playback operations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Quick Start Guide: 1. Notes

    Uploaded by

    robert orecis
    95 views4 pages
    This document provides a quick start guide for setting up a digital video recorder (DVR). It includes instructions on packing check, HDD installation, rear panel interfaces, startup and shutdown, login, network settings, DDNS and UPnP functions, recording, and playback. The guide outlines connecting monitors and hard drives, navigating the system menu, configuring network settings for remote access, and basic recording and playback operations.

    Original Description:

    dvr

    Original Title

    Quick Start Guide

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a quick start guide for setting up a digital video recorder (DVR). It includes instructions on packing check, HDD installation, rear panel interfaces, startup and shutdown, login, network settings, DDNS and UPnP functions, recording, and playback. The guide outlines connecting monitors and hard drives, navigating the system menu, configuring network settings for remote access, and basic recording and playback operations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    95 views4 pages

    Quick Start Guide: 1. Notes

    Uploaded by

    robert orecis
    This document provides a quick start guide for setting up a digital video recorder (DVR). It includes instructions on packing check, HDD installation, rear panel interfaces, startup and shutdown, login, network settings, DDNS and UPnP functions, recording, and playback. The guide outlines connecting monitors and hard drives, navigating the system menu, configuring network settings for remote access, and basic recording and playback operations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Digital Video Recorder

    Quick Start Guide


    1. Notes
    ● Please read this instruction carefully for correct use of the product and preserve it for reference purposes.
    ● This manual is suitable for 16/32 CH HD TVI DVR. All the examples and pictures used here are for reference only.
    ● There may be several technically incorrect places or printing errors in this manual. The updates will be added into
    the new version of this manual. The contents of this manual are subject to change without notice.
    ● This device should be operated only from the type of power source indicated on the marking label. The voltage of
    the power must be verified before using the same. Kindly remove the cables from the power source if the device is not
    to be used for a long period of time.

    2. Packing Check
    Please check the device and the accessories after getting the device. If there are any damages, shortages or defects,
    please contact your dealer immediately.

    3. HDD Installation
    This series of the product supports to install 8 SATA hard drives. Please use the HDD the manufacturers recommend
    specially for security and safe field. Please make sure that the device is powered off before the installation.
    ① Remove the cover and loosen the screws to take out two mounting bars.
    ② Screw the shorter pillar attached with the DVR into the bottom of the device.
    ③ Install back the lower mounting bar and tighten the screws of the lower HDD.

    ④ Connect the power and data cables and install the other three HDDs according to above-mentioned method.
    ⑤ Screw the longer pillar into the lower mounting bar.
    ⑥ Install back the upper mounting bar and tighten the screw of the pillar.

    ⑦ Install the upper four HDDs and install back the cover.

    Note: Please make sure the correct installation of the pillars for supporting the two mounting bars.

    4. Rear Panel Instructions


    The interfaces of the rear panels are for reference only.
    1
    Rear Panel for 16 CH

    Rear Panel for 32 CH

    Name Descriptions
    MIC IN 1CH MIC input.
    USB To connect external USB devices like USB mouse or USB storage device.
    LAN Network port.
    HDMI Connect to high-definition display device.
    VGA Connect to monitor.
    TVI/AHD VIDEO IN (TVI/AHD signal)1080P/720P, (analog signal ) 960H/D1 video inputs.
    AUDIO OUT Audio output. Connect to the sound box.
    AUDIO IN Audio inputs.
    K/B Connect to keyboard; A is TX+, B is TX-.
    P/Z Connect to speed dome; Y is TX+, Z is TX-.
    GND Grounding.
    ALARM IN Alarm inputs for connecting sensors.
    ALARM OUT Relay output. Connect to external alarm.
    E-SATA Connect to external SATA HDD for backup.

    5. Startup & Shutdown


    ► Startup
    ① Connect the monitor.
    ② Connect with the power.
    ③ The device will boot and the power indicator will turn blue.
    ④ A Wizard window will pop up.

    ► Shutdown
    By IR remote controller – Press power button to see a shutdown window. The device will shut down by selecting
    “OK” button. Then disconnect the power.
    By mouse – Go to “Main Menu” and then select “Shutdown” icon. This will bring up a shutdown window. The
    device will shut down by clicking “OK” button. Then disconnect the power.

    2
    6. Login
    After the wizard setup, you can see the live image. Right
    click to pop up a menu toolbar. Click main menu button.
    This will take you to see a login box. The default username
    is admin; the default password is 123456. Enter username
    and password and click “Login” button to go to the menu.

    7. NAT
    ► NAT Settings
    ① The DVR shall be powered on and connected to the network.
    ② Go to Main Menu→Setup→Network→Network. Refer to Fig 1. You can obtain the IP address, Subnet Mask and
    Gateway automatically. You can also manually enter them according to the actual network situation. Please make
    sure the network segment is the same as that of the network which is used.
    ③ Set the preferred or alternative DNS Server. Click “Apply” to save the parameters.
    ④ Go to Main Menu→Setup→Network→NAT tab. Refer to Fig 2.
    ⑤ Enable NAT and input the NAT Server (The default NAT Server is www.autonat.com) .
    ⑥ Click “Apply” to save the parameters.

    Fig 1 Fig 2

    ► NAT Access
    After finishing the NAT settings, you can enter the NAT Server on the PC (Input http://www.autonat.com to go to
    the IE client). If you are the first time to access the NAT, the network will download the ActiveX automatically.
    After installing ActiveX successfully, it will pop up the login box:

    Serial No: The MAC address of the DVR (Go to Main


    Menu→Information→Network to check the MAC address
    of the DVR).
    User Name: The username of DVR. The default username
    is admin.
    Password: The password of DVR. The default password
    is 123456.

    3
    8. DDNS & UPnP Function
    ► Quick DDNS Setup
    You may set up DDNS to be used in connection when your device is set to use PPPoE as its network connection.
    ① Go to Main Menu→Setup →Network→Other Settings interface.
    ② Enable DDNS and select www.autoddns.com from the drop-down menu of the DDNS type. Then self-define the
    host domain. After you register it successfully, save the settings by clicking “Apply” button. Now, you can remotely
    access the device using the domain name via WAN.

    ► UPnP
    You can use the UPnP function to enable the fast connection of the device to WAN via a router without port mapping.
    ① Go to Other Settings tab and enable the UPnP and click “Apply” button to save.
    ② Enable the UPnP function in the router.
    Before setting UPnP function, please configure the correct local IP address, subnet mask, gateway and DNS according to
    the router. Make sure the HTTP port and data port are correctly set. Make sure the router supports UPnP function.

    9. Recording
    Before recording, please install and format the HDD. Right click the mouse in the live interface to pop up the following
    menu toolbar. Click button to start recording.

    10. Playback
    Right click the mouse in the live interface to pop up the menu toolbar. Click the little triangle button beside button
    to set playback time (eg. 5 minutes). Then click button to play back the record from the past 5 minutes.

    4 450041000777 A1

    You might also like