The need to protect your critical Protect your critical rotating plant…

plant equipment
…with the intelligent option - DN26 G3 from Sensonics
Continuous protection and monitoring is an essential requirement for
critical rotating plant across industry. Whether you are generating
power, pumping essential fluids or driving process equipment – it is
The scalable, compact solution for Vibration, Position and Speed Monitoring.
Intelligent Machinery Protection
vital to monitor machinery dynamic behaviour and protect your
process from equipment downtime.

For over 40 years Sensonics has been at the forefront in developing

smart condition monitoring systems which help industry to monitor
and protect critical rotating plant. Bearing and Shaft Vibration
The DN26 G3 protection monitor has evolved from the highly success- Shaft and Thrust Position
ful DN26 series, now offering a single hardware platform for all your
vibration, position and speed measurement requirements in a
compact Din-Rail mount solution. Speed and Tachometer

DN26 G3 from Sensonics…

Applications
l Axial and Reciprocating Compressors
...the scalable and compact solution
l Steam Turbines

l Industrial Gas Turbines l Horizontal and Vertical Pumps

l Hydro Electric Machines l Turbo Expanders

l Electric motors and Generators l Fans and Blowers

l Centrifugal Pumps and Compressors l Centrifuges

produced by www.harveycomms.co.uk
Tel: +44 (0) 1442 876833 Fax: +44 (0) 1442 876477
Email: [email protected] www.sensonics.co.uk
Northbridge Road, Berkhamsted, Herts, HP4 1EF, UK
The need to protect your critical Protect your critical rotating plant…
plant equipment
…with the intelligent option - DN26 G3 from Sensonics
Continuous protection and monitoring is an essential requirement for
critical rotating plant across industry. Whether you are generating
power, pumping essential fluids or driving process equipment – it is
The scalable, compact solution for Vibration, Position and Speed Monitoring.
Intelligent Machinery Protection
vital to monitor machinery dynamic behaviour and protect your
process from equipment downtime.

For over 40 years Sensonics has been at the forefront in developing

smart condition monitoring systems which help industry to monitor
and protect critical rotating plant. Bearing and Shaft Vibration
The DN26 G3 protection monitor has evolved from the highly success- Shaft and Thrust Position
ful DN26 series, now offering a single hardware platform for all your
vibration, position and speed measurement requirements in a
compact Din-Rail mount solution. Speed and Tachometer

DN26 G3 from Sensonics…

Applications
l Axial and Reciprocating Compressors
...the scalable and compact solution
l Steam Turbines

l Industrial Gas Turbines l Horizontal and Vertical Pumps

l Hydro Electric Machines l Turbo Expanders

l Electric motors and Generators l Fans and Blowers

l Centrifugal Pumps and Compressors l Centrifuges

produced by www.harveycomms.co.uk
Tel: +44 (0) 1442 876833 Fax: +44 (0) 1442 876477
Email: [email protected] www.sensonics.co.uk
Northbridge Road, Berkhamsted, Herts, HP4 1EF, UK
Protecting your Critical Rotating Plant DN26 G3 Features and benefits Machine Measurement Modes
l Absolute and Relative Vibration
The DN26 G3 Machine Protection Monitor is a high performance fully programmable LCD Display – Intuitive Sensor Inputs - Fully config- Alarm Historian - Captures and l Shaft Position
bar graph and lamp urable interface to suit most time stamps all alarm events l Dedicated Speed & Phase Channel
signal conditioning unit capable of monitoring 2 Channels of Absolute Vibration, alarm displays with proximity, accelerometer and
Shaft Vibration or Shaft Position. An additional third channel is available as standard measured values vibration velocity sensors Applications
for measuring speed or for use as a phase reference. l Small to Medium Industrial Machines
l Fans, Pumps, Motors, Centrifuges and Turbines
The sensor interface is programmable to accept IEPE type accelerometers / Mechanical - DIN Rail mounted l Shutdown Protection and Condition Monitoring
velometers, proximity probes (API 670 std), and active / passive speed probes. unit with compact size 126mm l Ideal for OEM integration
All sensor signals are available via a buffered interface for further detailed signal x 109mm x 70mm including
connectors Summary LEDs - Easy viewing of Flexible Configuration
analysis. l Universal Module for all measurement options
overall module alarm and health
status l Field Upgradeable
All three measurement channels are available via a 4-20mA interface. Three alarm l Programmable Warning and Danger Alarms
Ethernet Interface - Utilised l Programmable Transducer Supply
relays are available as standard with the option to expand to a maximum of seven. for uploading measurement l Universal Mains and +24Vdc power options
One alarm relay dedicated to module and sensor integrity, while the remaining algorithm code, providing IP l Ethernet Communications
relays are programmable across a range of selectable alarm criteria. connectivity and remote Relay Expansion - 4 digital l Internal web server set up
access outputs for connection of l Compact size and scalable
The internal web server provides for easy module configuration and IP network a relay expansion raft
connectivity for remote access to the module facilities and data.

Each DN26 G3 is provided with an intuitive colour LCD display and menu drive
facility to provide immediate viewing and access to the measured values and alarm Buffered Outputs - Dynamic Menu Buttons - Access to the
status. sensor signals available for various display modes
further analysis

Take a closer look at the features and benefits… Power Supply +24V dc
and Universal AC Mains
Alarm Relays - 3 optional
relays with logic selection and
programmable levels, delay and
hysteresis Analog Outputs -
Fully configurable 4-20mA
outputs per channel

Web based configurator –

Access the internal web pages
to set up the module, locally
or remotely

DN26 G3 Measurement Specifications

Bearing Vibration Measurements Shaft Position and Vibration Measurements Speed Measurements

Acceleration: 0-100.0g, ±1.0% (1Hz to 3kHz ) Shaft Vibration: 0 – 1000um pk-pk , ±1.0% Frequency Range: 0.02Hz to 20kHz
Velocity: 0-100mm/s, ±1.0% (1Hz to 3kHz ) Low Pass Filter: Programmable, 100Hz to 3kHz, >24dB / Octave Accuracy: better than ±0.1% of reading
Displacement: 0 – 1000um, ±1.0% (5Hz to 1kHz ) Shaft Position: ±1.0mm std plus options Resolution: better than ±0.1% of full scale
Low Pass Filter: Programmable, 100Hz to 3kHz , >24dB / Octave Transducer: Eddy Current / Proximity Probe Sensitivity: 0.1V – 20.0V pk-pk
High Pass Filter: Programmable, 1Hz to 100Hz , >24dB / Octave 3.94mV/um and 7.87mV/um Transducer Options:
Transducer: 2/3 wire, IEPE programmable 3/4 – wire system, -24V @ 40mA Eddy Current / Proximity
Active / Passive Magnetic
TTL
Protecting your Critical Rotating Plant DN26 G3 Features and benefits Machine Measurement Modes
l Absolute and Relative Vibration
The DN26 G3 Machine Protection Monitor is a high performance fully programmable LCD Display – Intuitive Sensor Inputs - Fully config- Alarm Historian - Captures and l Shaft Position
bar graph and lamp urable interface to suit most time stamps all alarm events l Dedicated Speed & Phase Channel
signal conditioning unit capable of monitoring 2 Channels of Absolute Vibration, alarm displays with proximity, accelerometer and
Shaft Vibration or Shaft Position. An additional third channel is available as standard measured values vibration velocity sensors Applications
for measuring speed or for use as a phase reference. l Small to Medium Industrial Machines
l Fans, Pumps, Motors, Centrifuges and Turbines
The sensor interface is programmable to accept IEPE type accelerometers / Mechanical - DIN Rail mounted l Shutdown Protection and Condition Monitoring
velometers, proximity probes (API 670 std), and active / passive speed probes. unit with compact size 126mm l Ideal for OEM integration
All sensor signals are available via a buffered interface for further detailed signal x 109mm x 70mm including
connectors Summary LEDs - Easy viewing of Flexible Configuration
analysis. l Universal Module for all measurement options
overall module alarm and health
status l Field Upgradeable
All three measurement channels are available via a 4-20mA interface. Three alarm l Programmable Warning and Danger Alarms
Ethernet Interface - Utilised l Programmable Transducer Supply
relays are available as standard with the option to expand to a maximum of seven. for uploading measurement l Universal Mains and +24Vdc power options
One alarm relay dedicated to module and sensor integrity, while the remaining algorithm code, providing IP l Ethernet Communications
relays are programmable across a range of selectable alarm criteria. connectivity and remote Relay Expansion - 4 digital l Internal web server set up
access outputs for connection of l Compact size and scalable
The internal web server provides for easy module configuration and IP network a relay expansion raft
connectivity for remote access to the module facilities and data.

Each DN26 G3 is provided with an intuitive colour LCD display and menu drive
facility to provide immediate viewing and access to the measured values and alarm Buffered Outputs - Dynamic Menu Buttons - Access to the
status. sensor signals available for various display modes
further analysis

Take a closer look at the features and benefits… Power Supply +24V dc
and Universal AC Mains
Alarm Relays - 3 optional
relays with logic selection and
programmable levels, delay and
hysteresis Analog Outputs -
Fully configurable 4-20mA
outputs per channel

Web based configurator –

Access the internal web pages
to set up the module, locally
or remotely

DN26 G3 Measurement Specifications

Bearing Vibration Measurements Shaft Position and Vibration Measurements Speed Measurements

Acceleration: 0-100.0g, ±1.0% (1Hz to 3kHz ) Shaft Vibration: 0 – 1000um pk-pk , ±1.0% Frequency Range: 0.02Hz to 20kHz
Velocity: 0-100mm/s, ±1.0% (1Hz to 3kHz ) Low Pass Filter: Programmable, 100Hz to 3kHz, >24dB / Octave Accuracy: better than ±0.1% of reading
Displacement: 0 – 1000um, ±1.0% (5Hz to 1kHz ) Shaft Position: ±1.0mm std plus options Resolution: better than ±0.1% of full scale
Low Pass Filter: Programmable, 100Hz to 3kHz , >24dB / Octave Transducer: Eddy Current / Proximity Probe Sensitivity: 0.1V – 20.0V pk-pk
High Pass Filter: Programmable, 1Hz to 100Hz , >24dB / Octave 3.94mV/um and 7.87mV/um Transducer Options:
Transducer: 2/3 wire, IEPE programmable 3/4 – wire system, -24V @ 40mA Eddy Current / Proximity
Active / Passive Magnetic
TTL
The need to protect your critical Protect your critical rotating plant…
plant equipment
…with the intelligent option - DN26 G3 from Sensonics
Continuous protection and monitoring is an essential requirement for
critical rotating plant across industry. Whether you are generating
power, pumping essential fluids or driving process equipment – it is
The scalable, compact solution for Vibration, Position and Speed Monitoring.
Intelligent Machinery Protection
vital to monitor machinery dynamic behaviour and protect your
process from equipment downtime.

For over 40 years Sensonics has been at the forefront in developing

smart condition monitoring systems which help industry to monitor
and protect critical rotating plant. Bearing and Shaft Vibration
The DN26 G3 protection monitor has evolved from the highly success- Shaft and Thrust Position
ful DN26 series, now offering a single hardware platform for all your
vibration, position and speed measurement requirements in a
compact Din-Rail mount solution. Speed and Tachometer

DN26 G3 from Sensonics…

Applications
l Axial and Reciprocating Compressors
...the scalable and compact solution
l Steam Turbines

l Industrial Gas Turbines l Horizontal and Vertical Pumps

l Hydro Electric Machines l Turbo Expanders

l Electric motors and Generators l Fans and Blowers

l Centrifugal Pumps and Compressors l Centrifuges

produced by www.harveycomms.co.uk
Tel: +44 (0) 1442 876833 Fax: +44 (0) 1442 876477
Email: [email protected] www.sensonics.co.uk
Northbridge Road, Berkhamsted, Herts, HP4 1EF, UK