AT9 (S) USB Data Backup Copy Function Tutorial
AT9 (S) USB Data Backup Copy Function Tutorial
Note 1: Every time AT9(S) is connected with computer via USB cable, it’s advised to
reopen "Radiolink AT9(S) USB data copy system V1.0".
Note 2: When sending data to AT9(S) with success, a “DD” sound would be heard. If
there’s no DD sound, please reopen "Radiolink AT9(S) USB data copy system V1.0”,
return on the AT9(S), reconnect the USB cable.
Steps:
1. In order to have the copy function, firmware of AT9(S) should be upgraded to V1.3.3 or
above. For the detailed steps about how to flash the latest firmware, please refer to
http://radiolink.com.cn/doce/AT9(S)upgrade.html or
https://www.youtube.com/watch?v=QvazyIYqLJ8
7. Read the AT9(S) data: click “Read the AT9(S) data”, the green light is flashing while
reading the data, you can hear “D” sound twice from AT9(S) when data reading is
finished.
8.
Change the
path to
save the
data in the
file you
want, then
click Save
Data
9. Connec
t the new
AT9(S)
and reopen “AT9(S) USB data copy system V1.0” and Choose to send files : choose the
file just saved
10. click “确定(confirm)” if reminder “Please input data is a hexadecimal”pops out.
11. Send data to AT9(S): click "Send data to AT9(S)", AT9(S) will keep making "DD"
sound till the progress bar finishes, then you can pull off the USB line and return on your
AT9(S).
Note: If the AT9(S) doesn’t have “DD” sound, it means the data copy has failed
Please reconnect the AT9(S) with the computer and try to send again.