Scribd
Upload
105 views8 pages

Building Phase 2 Floor Apply To All Room Corridor Equip. No. FCU-L4-C-01 Zone

This document contains a duct sizing and static pressure calculation sheet for Kingwood Resort in Mukah, Malaysia. It provides design criteria for air flow ranges and velocity allowances. The sheet includes 11 duct sections with specifications for air flow rates, dimensions, fittings, friction loss rates, and required calculations to determine pressure drops and losses for the ducting system. The total predicted pressure loss is calculated but shown as a value error due to incomplete calculations.

Uploaded by

baparis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
105 views8 pages

Building Phase 2 Floor Apply To All Room Corridor Equip. No. FCU-L4-C-01 Zone

This document contains a duct sizing and static pressure calculation sheet for Kingwood Resort in Mukah, Malaysia. It provides design criteria for air flow ranges and velocity allowances. The sheet includes 11 duct sections with specifications for air flow rates, dimensions, fittings, friction loss rates, and required calculations to determine pressure drops and losses for the ducting system. The total predicted pressure loss is calculated but shown as a value error due to incomplete calculations.

Uploaded by

baparis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 8

KINGWOOD RESORT, MUKAH

Project No. : Design Criteria


DUCT SIZING & STATIC PRESS. CALCULATION SHEET Air Flow Range Allow.
Building : PHASE 2 S/A @ 1 Pa/m Min. Max. Vel.
Floor : APPLY TO ALL R/A @ 0.5 Pa/m (l/s) (l/s) (m/s)
Room : CORRIDOR F/A @ 1 Pa/m 0 2,000 6.0
Equip. No. : FCU-L4-C-01 E/A (To.) @ 1 Pa/m 2,001 5,000 7.5
Zone : E/A (Ki.) @ 1.224 Pa/m 5,001 9,000 10.0
Note: S/F @ 1.8 ~ 3.265 Pa/m 9,001 12,000 11.0
Pressure drop characteristics for the ducts and fittings are derived from 12,001 45,000 12.0
ASHRAE 1997 Fundamental Chapter 32 pp 32.01-32.49. 100 Cfm To 48 l/s
Max. fric. loss rate DPf : 1.00 Pa/m 284 l/s To 602 Cfm
Fan Capacity : 7,000 L/s

Duct
Duct Sec. Air Flowrate Internal Duct Dimension Duct Fittings Fitting Fric. Section
No. Lining W x H Length El-90 EL-45 Tee Branc. Reducer Press. Loss V DPf Loss Press. Drop
User Input
(I/s) (yes/nil) (mm) (mm) (m) (Pa) (m/s) (Pa/m) (Pa) (Pa)
1 48.0 nil #VALUE! x 150 3 0 0 0 0 0 #VALUE! #VALUE! ### ### #VALUE!
2 605.0 nil #VALUE! x 250 3 1 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
3 125.0 nil #VALUE! x 200 3 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
4 45.0 nil #VALUE! x 100 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
5 420.0 nil #VALUE! x 250 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
6 400.0 nil #VALUE! x 250 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
7 340.0 nil #VALUE! x 250 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
8 280.0 nil #VALUE! x 250 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
9 200.0 nil #VALUE! x 200 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
10 140.0 nil #VALUE! x 200 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
11 80.0 nil #VALUE! x 150 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!

Ducting Press. Loss : #VALUE!


OBD : 10.00
SAG : 50.00
Louvre : 50.00
Silencer : 50.00

Allow. Factor, % : 10
Total Pressure Loss, Pa #VALUE!
Specification 250
KINGWOOD RESORT, MUKAH
Project No. : Design Criteria
DUCT SIZING & STATIC PRESS. CALCULATION SHEET Air Flow Range Allow.
Building : PHASE 2 S/A @ 1 Pa/m Min. Max. Vel.
Floor : APPLY TO ALL R/A @ 0.5 Pa/m (l/s) (l/s) (m/s)
Room : CORRIDOR F/A @ 1 Pa/m 0 2,000 6.0
Equip. No. : FCU-L4-C-01 E/A (To.) @ 1 Pa/m 2,001 5,000 7.5
Zone : E/A (Ki.) @ 1.224 Pa/m 5,001 9,000 10.0
Note: S/F @ 1.8 ~ 3.265 Pa/m 9,001 12,000 11.0
Pressure drop characteristics for the ducts and fittings are derived from 12,001 45,000 12.0
ASHRAE 1997 Fundamental Chapter 32 pp 32.01-32.49. 600 Cfm To 284 l/s
Max. fric. loss rate DPf : 1.00 Pa/m 284 l/s To 602 Cfm
Fan Capacity : 725 L/s

Duct
Duct Sec. Air Flowrate Internal Duct Dimension Duct Fittings Fitting Fric. Section
No. Lining W x H Length El-90 EL-45 Tee Branc. Reducer Press. Loss V DPf Loss Press. Drop
User Input
(I/s) (yes/nil) (mm) (mm) (m) (Pa) (m/s) (Pa/m) (Pa) (Pa)
1 111.0 nil #VALUE! x 250 3 0 0 0 0 0 #VALUE! #VALUE! ### ### #VALUE!
2 632.0 nil #VALUE! x 250 3 1 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
3 557.0 nil #VALUE! x 250 3 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
4 484.0 nil #VALUE! x 250 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
5 408.0 nil #VALUE! x 250 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
6 335.0 nil #VALUE! x 250 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
7 260.0 nil #VALUE! x 200 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
8 186.0 nil #VALUE! x 200 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!
9 111.0 nil #VALUE! x 200 2 0 0 0 0 1 #VALUE! #VALUE! ### ### #VALUE!

Ducting Press. Loss : #VALUE!


OBD : 10.00
SAG : 50.00
Louvre : 50.00
Silencer : 50.00

Allow. Factor, % : 10
Total Pressure Loss, Pa #VALUE!
Specification 250
KINGWOOD RESORT, MUKAH
Project No. : Design Criteria
DUCT SIZING & STATIC PRESS. CALCULATION SHEET Air Flow Range Allow.
Building : PHASE 2 S/A @ 1 Pa/m Min. Max. Vel.
Floor : APPLY TO ALL R/A @ 0.5 Pa/m (l/s) (l/s) (m/s)
Room : Toilet F/A @ 1 Pa/m 0 2,000 6.0
Equip. No. : TEF-L4-01 E/A (To.) @ 1 Pa/m 2,001 5,000 7.5
Zone : E/A (Ki.) @ 1.224 Pa/m 5,001 9,000 10.0
Note: S/F @ 1.8 ~ 3.265 Pa/m 9,001 12,000 11.0
Pressure drop characteristics for the ducts and fittings are derived from 12,001 45,000 12.0
ASHRAE 1997 Fundamental Chapter 32 pp 32.01-32.49. 600 Cfm To 284 l/s
Max. fric. loss rate DPf : 1.80 Pa/m 284 l/s To 602 Cfm
Fan Capacity : 2,112 L/s

Duct
Duct Sec. Air Flowrate Internal Duct Dimension Duct Fittings Fitting Fric. Section
No. Lining W x H Length El-90 EL-45 Tee Branc. Reducer Press. Loss V DPf Loss Press. Drop
User Input
(I/s) (yes/nil) (mm) (mm) (m) (Pa) (m/s) (Pa/m) (Pa) (Pa)
1 2,112.0 nil 600 #VALUE! x 400 3 0 0 0 0 0 0.00 9.47 1.67 5.01 5.01
2 1,920.0 nil 550 #VALUE! x 400 7 0 0 0 0 1 2.80 9.36 1.72 12.04 14.84
3 1,536.0 nil 500 #VALUE! x 400 7 0 0 0 0 1 2.17 8.21 1.42 9.94 12.11
4 1,152.0 nil 400 #VALUE! x 350 7 0 0 0 0 1 2.49 8.78 1.99 13.93 16.42
5 768.0 nil 350 #VALUE! x 300 7 0 0 1 0 1 31.48 7.80 1.91 13.37 44.85
6 384.0 nil 300 #VALUE! x 150 20 1 0 0 0 0 42.39 9.36 4.64 92.80 135.19
7 64.0 nil #VALUE! x 100 2 0 0 0 1 0 #VALUE! #VALUE! ### ### #VALUE!
8 32.0 nil #VALUE! x 100 2 0 0 0 1 0 #VALUE! #VALUE! ### ### #VALUE!
x

Ducting Press. Loss : #VALUE!


OBD : 10.00
SAG : 30.00
Louvre : 30.00
Silencer : -

Allow. Factor, % : 10
Total Pressure Loss, Pa #VALUE!
Specification 350
KINGWOOD RESORT, MUKAH
Project No. : Design Criteria
DUCT SIZING & STATIC PRESS. CALCULATION SHEET Air Flow Range Allow.
Building : PHASE 2 S/A @ 1 Pa/m Min. Max. Vel.
Floor : APPLY TO ALL R/A @ 0.5 Pa/m (l/s) (l/s) (m/s)
Room : Toilet F/A @ 1 Pa/m 0 2,000 6.0
Equip. No. : TEF-L4-02 E/A (To.) @ 1 Pa/m 2,001 5,000 7.5
Zone : E/A (Ki.) @ 1.224 Pa/m 5,001 9,000 10.0
Note: S/F @ 1.8 ~ 3.265 Pa/m 9,001 12,000 11.0
Pressure drop characteristics for the ducts and fittings are derived from 12,001 45,000 12.0
ASHRAE 1997 Fundamental Chapter 32 pp 32.01-32.49. 600 Cfm To 284 l/s
Max. fric. loss rate DPf : 1.80 Pa/m 284 l/s To 602 Cfm
Fan Capacity : 3,650 L/s

Duct
Duct Sec. Air Flowrate Internal Duct Dimension Duct Fittings Fitting Fric. Section
No. Lining W x H Length El-90 EL-45 Tee Branc. Reducer Press. Loss V DPf Loss Press. Drop
User Input
(I/s) (yes/nil) (mm) (mm) (m) (Pa) (m/s) (Pa/m) (Pa) (Pa)
1 3,650.0 nil 750 #VALUE! x 500 3 0 0 0 0 0 0.00 10.48 1.55 4.65 4.65
2 3,072.0 nil 700 #VALUE! x 500 7 0 0 0 0 1 2.83 9.42 1.32 9.24 12.07
3 2,304.0 nil 600 #VALUE! x 500 7 0 0 0 0 1 2.17 8.20 1.11 7.77 9.94
4 1,536.0 nil 500 #VALUE! x 400 7 0 0 0 0 1 2.17 8.21 1.42 9.94 12.11
5 768.0 nil 350 #VALUE! x 300 7 0 0 1 0 1 31.48 7.80 1.91 13.37 44.85
6 384.0 nil 300 #VALUE! x 150 20 1 0 0 0 0 42.39 9.36 4.64 92.80 135.19
7 64.0 nil #VALUE! x 100 2 0 0 0 1 0 #VALUE! #VALUE! ### ### #VALUE!
8 32.0 nil #VALUE! x 100 2 0 0 0 1 0 #VALUE! #VALUE! ### ### #VALUE!
x

Ducting Press. Loss : #VALUE!


OBD : 10.00
SAG : 30.00
Louvre : 30.00
Silencer : -

Allow. Factor, % : 10
Total Pressure Loss, Pa #VALUE!
Specification 350

You might also like