COMO LIMPIAR (formatear) LA PC PM CS rls. 5.0.

31

Synchronizing with Firmbase...

General Software Firmbase[r] SMM Kernel 1.3.3 May 11 2005 00:13:58
Copyright (C) 2002-2005 General Software, Inc.

Firmbase initialized.

00000589K Low Memory PassedEmbedded BIOS(R) 2000 Revision 5.3

01035136K Ext Memory PassedSoftware, Inc. All rights reserved.
Wait.....

PCI Device Table.

Bus Dev Func VendID DevID Class Irq
00 00 00 8086 3580 Host Bridge
00 00 01 8086 3584 System
00 00 03 8086 3585 System
00 01 00 8086 3581 PCI-to-PCI Bridge
00 02 00 8086 3582 VGA Display 12
00 1D 00 8086 24C2 Serial Bus 12
00 1D 01 8086 24C4 Serial Bus 11
00 1D 07 8086 24CD Serial Bus 10
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 24C0 ISA Bridge
00 1F 01 8086 24CB IDE Controller 9
00 1F 03 8086 24C3 Serial Bus 7
02 00 00 104C AC56 CardBus Bridge 15
02 01 00 8086 1209 Ethernet 12
02 02 00 8086 1209 Ethernet 7
02 03 00 8086 1078 Ethernet 9
Plug-n-Play v1.0A Copyright (C) 2005 General Software, Inc.

Polling Hard Drive and Compact Flash Locations

+------------------------------------------------------------------------------+
| System BIOS Configuration, (C) 2005 General Software, Inc. |
+---------------------------------------+--------------------------------------+
| System CPU : Pentium M | Low Memory : 632KB |
| Coprocessor : Enabled | Extended Memory : 1011MB |
| Ide 0 Type :3 | Serial Ports 1-2 : 03F8 02F8 |
| Ide 1 Type :3 | ROM Shadowing : Enabled |
| Ide 2 Type :3 | BIOS Version : NTDU74AA 14 |
+---------------------------------------+--------------------------------------+

Press F to force board to boot from faceplate drive.

....................................................

Attempting to boot from faceplate drive.

CPU Frequency = 1400 MHz

V1.6a+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++usrAtaInit
usrAtaInit trying controller 0
usrAtaInit: Adding block device /dev/hda = 0x25f0cd9c
usrAtaInit done
Found device : INTEL 82365SL

VxWorks System Boot

f2pyright 1984-2004 Wind River Systems,Mo uInnticng /.c

CPU: CPPM PENTIUM M

Version: VxWorks5.5.1
BSP version: 1.2/3a
Creation date: May 23 2007, 00:27:33

/dev/hda1 /boot Foun d /c f 2/ n vr am.smyss

Moountisng /b o o t d
ro,autosync
/dev/hda2 /p vfat ro,autosync
/dev/hda3 /d vfat rw,autosync
/dev/hda4 /e vfat Fou n d / b oo t /n vram . sy sr
w,autosync
/dev/hdc1 /cf2 msdos user,rw,noauto,changeno
warn
dosChkLib : CLOCK_REALTIME is being reset to WED DEC 13 01:24:42 2006
Value obtai
ned from file system volume descriptor pointer: 0x2fd9b0
The old setting was THU
JAN 01 00:00:00 1970
Accepted system dates are greater than THU DEC 27 00:00:00 1
990
/boot/ - Volume is OK
Selecting nvram file from 2 sources

Read boot parameters from:

F: Faceplate compact flash
H: Hard Drive
8 [H] f
Reading boot parameters from /cf2/nvram.sys

Press ^B to stop auto-boot...

0
auto-booting...

boot device : ata=0,1

unit number :0
processor number : 0
file name : /cf2/install/instos.sys
flags (f) : 0x2
other (o) : fei

Attaching to disk device...

mounting /cf2
done.
Loading /cf2/install/instos.sys...4882432 + 11026432
Starting at 0x308000...

0x23a53144 (tRootTask): logging started to /tyCo/0 [3], queue size 256

usrAtaInit
usrAtaInit trying controller 0
usrAtaInit: Adding block device /dev/hda = 0x237d70dc
usrAtaInit done
Found device : INTEL 82365SL
0x23a53144 (tRootTask): before usrNetInit()
Host Name: bootHost
Target Name: vxTarget
User: target
Attaching interface lo0... done
Starting usrNetIfAutoConfig
usrNetIfAutoConfig: 10.232.52.87:ff000000
Completed usrNetIfAutoConfig
Attached IPv4 interface to fei unit 0
0x23a53144 (tRootTask): after usrNetInit()

dosChkLib : CLOCK_REALTIME is being reset to FRI SEP 07 00:00:00 2007

Value obtained from file system volume descriptor pointer: 0x237a2d98
The old setting was THU JAN 01 00:00:09 1970
Accepted system dates are greater than THU DEC 27 00:00:00 1990
/cf2/ - Volume is OK
done
0x23a53144 (tRootTask): before wdbConfig()
0x23a53144 (tRootTask): after wdbConfig()
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003

CPU: CPPM PENTIUM M. Processor #0.

Memory Size: 0x40000000. BSP version 1.2/3a.
WDB Comm Type: WDB_COMM_END
WDB: Ready.

****OS RESTART****
init tod
init disk redundancy phase 1
/boot/ - Volume is OK

/p/ - Volume is OK
/d/ - Volume is OK
/e/ - Volume is OK
init basic disk redundancy
init partition selector
/d/ - Volume is OK

========================
=== ===
=== CPP === N O R T E L
=== Systems ===
=== ===
========================

CPU: CPPM PENTIUM M (1024 MB) BSP version: 2.3/1.0

VxWorks: VxWorks5.5.1 Created: May 23 2007, 00:25:15
Copyright 1999-2007 Nortel
Copyright 1984-2005 Wind River Systems, Inc.
 Communication Server 1000 Software/Database/BOOTROM RMD Install Tool
====================================================================

#####
######### ########
########`` `#############
######## `` `#############
#######` ######```####
####### ######`` `### NORTEL
####### #####`` ####
####### #####` #### Communication Server 1000 Software
`#########` ####`
#######` ##### Install Tool version 29
`####### #####`
########## `###` Copyright 1992 - 2007
##``########## #
## `########################
`# `########################
###########################``
````````` ````####````

Please press <CR> when ready ...

*****************************************************************
WARNING:

This software does not support TNs configured on PE/EPE

shelves. Upgrading to this software release will permanently
disable all TNs configured on PE/EPE and will not allow new
TNs to be configured.

Proceed with the upgrade? (Y/N) y

*****************************************************************
WARNING:

Upgrading from pre-Release 4.5 software to Release 4.5 or higher

will result in the system PDT passwords being reset to default.

Proceed with the upgrade? (Y/N) y

>Obtaining and checking system configuration ...

>Validate hard disk partitions
Validate number of hard drive partitions and size ...
 The size of partition /p is 304 Mb.
The size of partition /d is 304 Mb.
The size of partition /e is 304 Mb.
There are 3 partitions
Disk partitions and sectors checking is completed!

/boot/ - disk check in progress ...

/boot/ - Volume is OK

total # of clusters: 16,274

# of free clusters: 15,695
# of bad clusters: 0
total free space: 15,695 Kb
max contiguous free space: 16,071,680 bytes
# of files: 2
# of folders: 0
total bytes in files: 589,866
# of lost chains: 0
total bytes in lost chains: 0
>Copying "/cf2/swload/disk4021.sys" to "/u/disk4021.sys" -

>System date and time is: Friday 09-07-2007, 10:41:22

Communication Server 1000 Software/Database/BOOTROM RMD Install Tool

====================================================================

MAIN MENU

The Software Installation Tool will install or upgrade

Communication Server 1000 Software, Database and the CP-BOOTROM.

You will be prompted throughout the installation and given the

opportunity to quit at any time.

Please enter:
<CR> -> <u> - To Install Menu.
<t> - To Tools Menu.
<q> - Quit.

Enter choice> t

Communication Server 1000 Software/Database/BOOTROM RMD Install Tool

====================================================================

TOOLS MENU

This is the Tools Menu for Install. You can select the tool that
is appropriate. Please select one of the options below.
 Please enter:
<CR> -> <a> - To set the system date and time.
<b> - To partition the Fix Media Device.
<c> - To display the partition size of Fix Media Device.
<d> - To reload default accounts.
<g> - To print System S/W content on Removable Media Device.
<h> - To print Keycode content.
<i> - To print Security Device content.
<j> - To Check the customer specific System S/W on the RMD.
<k> - To manually create Keycode on Removable Media Device.
<r> - To install Keycode only.
<s> - To archive existing database.
<t> - To replace CPU board BIOS.
<v> - To display media vendor information.
<w> - To Set the CPPM Core Location (Side/Loop/Shelf) Information.
<m> - To return to the Main Menu.

Enter choice> b

Communication Server 1000 Software/Database/BOOTROM RMD Install Tool

====================================================================

You selected to Partition the Fix Media Device. This task

can only be performed by Nortel's Manufacturing
personnel.

Enter password -> letron

Communication Server 1000 Software/Database/BOOTROM RMD Install Tool

====================================================================

You selected to Partition the Fix Media Device. This will

ERASE ALL files and directories on the FMD of Core 0.

You can choose to go on and Partition your FMD or choose

to quit now and leave the FMD unchanged.

Note: INSTALL WILL REBOOT AFTER THIS PROCEDURE AND

FMD WILL BE EMPTY AFTER YOU PARTITION IT.
INSTALL MEDIA MUST BE IN THE DRIVE AT THIS TIME.

Please enter:
<CR> -> <q> - Quit from this menu and leave the FMD unchanged.
<a> - Partition FMD into appropriate devices.

Enter choice> a
Clearing partitions on hda
>Repartitioning Fix Media Device ...
>Fix Media Device repartition completed
>Formatting FMD ...
Retrieved old volume params with %100 confidence:
Volume Parameters: FAT type: FAT16, sectors per cluster 2
2 FAT copies, 0 clusters, 64 sectors per FAT
Sectors reserved 1, hidden 63, FAT sectors 128
Root dir entries 512, sysId (null) , serial number a4ae2016
Label:" " ...
Disk with 32705 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT16, sectors per cluster 2
2 FAT copies, 16240 clusters, 64 sectors per FAT
Sectors reserved 1, hidden 63, FAT sectors 128
Root dir entries 512, sysId VXDOS16 , serial number a4ae2016
Label:" " ...
Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId (null) , serial number ae7daa55
Label:" " ...
Disk with 622592 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 77660 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 63, FAT sectors 1216
Root dir entries 0, sysId VX5DOS32, serial number ae7daa55
Label:" " ...
Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId (null) , serial number ae57aa55
Label:" " ...
Disk with 622592 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 77668 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId VX5DOS32, serial number ae57aa55
Label:" " ...
Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 1216
Root dir entries 0, sysId (null) , serial number ae75aa55
Label:" " ...
Disk with 622592 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 77660 clusters, 608 sectors per FAT
Sectors reserved 32, hidden 63, FAT sectors 1216
Root dir entries 0, sysId VX5DOS32, serial number ae75aa55
Label:" " ...
/boot/ - Volume is OK
/p/ - Volume is OK
>Fix Media Device format completed
>Rebooting system ...
Synchronizing with Firmbase...
General Software Firmbase[r] SMM Kernel 1.3.3 May 11 2005 00:13:58
Copyright (C) 2002-2005 General Software, Inc.

Firmbase initialized.

Wait.....

PCI Device Table.

Bus Dev Func VendID DevID Class Irq
00 00 00 8086 3580 Host Bridge
00 00 01 8086 3584 System
00 00 03 8086 3585 System
00 01 00 8086 3581 PCI-to-PCI Bridge
00 02 00 8086 3582 VGA Display 12
00 1D 00 8086 24C2 Serial Bus 12
00 1D 01 8086 24C4 Serial Bus 11
00 1D 07 8086 24CD Serial Bus 10
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 24C0 ISA Bridge 00 Revision 5.3
00 1F 01 8086 24CB IDE Controller 9rights reserved.
00 1F 03 8086 24C3 Serial Bus 7
02 00 00 104C AC56 CardBus Bridge 15
02 01 00 8086 1209 Ethernet 12
02 02 00 8086 1209 Ethernet 7
02 03 00 8086 1078 Ethernet 9
Plug-n-Play v1.0A Copyright (C) 2005 General Software, Inc.

Polling Hard Drive and Compact Flash Locations

+------------------------------------------------------------------------------+
| System BIOS Configuration, (C) 2005 General Software, Inc. |
+---------------------------------------+--------------------------------------+
| System CPU : Pentium M | Low Memory : 632KB |
| Coprocessor : Enabled | Extended Memory : 1011MB |
| Ide 0 Type :3 | Serial Ports 1-2 : 03F8 02F8 |
| Ide 1 Type :3 | ROM Shadowing : Enabled |
| Ide 2 Type :3 | BIOS Version : NTDU74AA 14 |
+---------------------------------------+--------------------------------------+

Press F to force board to boot from faceplate drive.

.................................................... Dejas que corra o tecleas F para instalarle en SW!

CPU Frequency = 1400 MHz

Embedded BIOS Debugger Invalid Opcode Trap
EAX = 00007BEE CS:EIP = 0000:00007F5D EFL = 00000207 pl nz .. na .. PE .. CY
EBX = 00007C00 SS:ESP = 0000:00005711 EBP = 000007BE .. nt IOPL0 nv up EI ..
ECX = 00000001 DS:ESI = 0000:000007BE FS = 0000 .. .. id vp vi al vm rf
EDX = 00000180 ES:EDI = 0000:00007C01 GS = 0000
0000:00007F5D dw 2FFEh / (12286).

EBDEBUG: