H802SCUN Board Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

H802SCUN Board

The H802SCUN board is an integrated optical-copper super control unit board. It is the core for system control and
service switching and aggregation.

Benefits Specifications

 Supports integrated optical copper access for Function


LAN switch 24 x 10GE + 4 x GE
GPON, P2P, xDSL, and voice services
480 Gbit/s (active/standby mode)
 Supports up to 960 Gbit/s switching capacity Switching capacity
960 Gbit/s (load sharing mode)
 Supports active/standby mode and load 10 Gbit/s (active/standby mode)
Bandwidth per slot
sharing mode, doubling processing 20 Gbit/s (load sharing mode)
performance MAC address table 32768

 Supports ISSU, saving the upgrade Access user 8192


Multicast user 8192
interruption time
Configurable multicast channel 4096
 Supports 1588v2, and 1588 ACR by working
Concurrent multicast channel 2000
together with the H801CKMD daughter board
IPv4 routing table 5120
External Interfaces IPv6 routing table 5120
Service port 32768
 Management interfaces
ARP table 8192
 CON (RJ-45)
ACL rule 1024
RS-232 serial port
2052 bytes. After the jumbo frame
 ETH (RJ-45)
Maximum Frame Size function is enabled, a maximum of 9216
10/100M Base-T maintenance network port
bytes can be supported.
 ESC (RJ-45)
VRF (L3 VPN) Supported
RS-485 monitoring serial port
Environment
 Communication Interfaces
Operating temperature -40°C to +65°C
 TX0 RX0 to TX3 RX3 (4 x SFP GE ports)
Static: 30 W
Used for upstream transmission or cascading Power consumption
Maximum: 50 W

You might also like