Trends in Instrumentation and Control Engineering

1.
Blog Post / Newsletter

Title: Instrumentation and Control Engineering – Industry Trends
End users facing globalisation are driving plant performance at a level that would
be inconceivable without modern process control engineering systems and
business processes.
The demand for Instrumentation and Control (IC) technicians, is on the rise in
Australia.
The field instruments measure physical parameters like level, temperature, flow
pressure, etc provide input to the process control system. The field instruments
are widely used in a process control and automation.
The data acquired by field sensors in real-time are stored in PLC/ SCADA/ DCS
control system database and is analysed and manipulated to control the process
variables to the desired set points.
Applications of Instrumentation and Control Engineering include:
1. Remote monitoring and safety for the critical infrastructure
In Oil and Gas facilities, Mineral processing, Food, and Chemical Processing
industry, the field sensors data is stored and analysed in PLC/ SCADA/ DCS
control system, and provides real time:
a) monitoring of process and equipment conditions.

b) process optimisation by analysing historical process and equipment
performance trends.
c) recording of process deviation from desired process conditions.
d) diagnostic of equipment and process health and to plan its overhaul/
repair or prior any breakdown.
e) triggering process alarms and shutdown to operate the plant safely.
2. Power grid quality control: grid-connected PV solar feed in

The stability of the electricity grid which receives PV Solar feed from roof top
solar, is compromised during change of clear sky day to an overcast day, due
to:
a) sudden overload experienced by power gird, leading to tripping of the

partial/ complete grid; and
b) Time lag to bring in spinning reserve supply from gas fired synchronous
generators.
This issue is now being addressed by installation of smart digitally controlled

equipment which can cut off feed in PV Solar remotely. When the reduction in
generation of PV Solar is detected by network operator, it
a) triggers the signal to cut off feed in Power from Roof Top solar; and
b) kick off the spinning reserve generator reducing the time lag that would
have experienced without shutting off PV Solar.
Refer case study dated 14th March 2021 in South Australia where a grid-
connect PV was switched off by energy authorities to stabilise the electricity
grid. https://www.abc.net.au/news/2021-03-17/solar-panels-switched-off-in-
sa-to-stabilise-grid/13256572.
3. Human Machine Interface (HMI) and Supervisory Control and Data Acquisition
(SCADA):
 HMI and SCADA technologies for process control automation help to
achieve business goals for improved facilities utilisation, productivity,
product quality, availability, protection, flexibility, and speed.
Instrumentation and Control Engineering Training Available from PMV
PMV offer a variety of Instrumentation and Control Engineering Training options

designed for those working towards a career in industrial automation.
Our training is a blended delivery of 70% hands-on, practical training and 30%
theory, you will get a chance to work on a real PLC, in our purpose-built skid, like
what you are expected to see in the workplace.
Full qualifications we offer, involving PLC and SCADA:
 UEE40411 Certificate IV in Electrical Instrumentation (hyperlink to:

https://www.pmv.net.au/courses/eeha-courses/certificate-iv-in-electrical-
instrumentation/)
 UEE31211 Certificate III in Instrumentation and Control (hyperlink to:
https://www.pmv.net.au/courses/electrical-instrumentation-
courses/certificate-iii-instrumentation-control/)
 UEE51011 Diploma of Instrumentation and Control Engineering (hyperlink
to: https://www.pmv.net.au/courses/electrical-instrumentation-
courses/diploma-instrumentation-control-engineering-uee51011/)
 UEE61511 Advanced Diploma of Instrumentation and Control Engineering
(hyperlink to: https://www.pmv.net.au/courses/electrical-instrumentation-
courses/advanced-diploma-instrumentation-uee61511/)
For further course information, or to book in, contact the office. (hyperlink to:
https://www.pmv.net.au/contact-us/)
2. Short post for FB, Instagram and LinkedIn:
Title: Are you looking for a career in Instrumentation and Control Engineering
Technology?
The demand for Instrumentation and Control (IC) technicians is on the rise in
Australia. Field instruments are widely used in a process control and automation.
Field instruments measure physical parameters like level, temperature, flow
pressure, etc.
PMV offers multiple courses from Certificate IV to Advanced Diploma level for
those looking to make a career in Instrumentation and Control. Our training is a
blended delivery of 70% hands-on, practical training and 30% theory, you will get
a chance to work on a real PLC, in our purpose-built skid, like what you are
expected to see in the workplace.
For further course information, or to book in, contact the office. (hyperlink to:
https://www.pmv.net.au/contact-us/)

Trends in Instrumentation and Control Engineering

Uploaded by

Copyright:

Available Formats

Trends in Instrumentation and Control Engineering

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Trends in Instrumentation and Control Engineering

Uploaded by

Copyright:

Available Formats

1.

Blog Post / Newsletter

Applications of Instrumentation and Control Engineering include:

1. Remote monitoring and safety for the critical infrastructure

a) monitoring of process and equipment conditions.

2. Power grid quality control: grid-connected PV solar feed in

a) sudden overload experienced by power gird, leading to tripping of the

This issue is now being addressed by installation of smart digitally controlled

PMV offer a variety of Instrumentation and Control Engineering Training options

Full qualifications we offer, involving PLC and SCADA:

 UEE40411 Certificate IV in Electrical Instrumentation (hyperlink to:

You might also like