Release Notes

Analyzer Update April 2020

 Release Notes

The content of this manual is provided for information only, is subject to change without notice, and should
not be construed as a commitment by Amdocs. Amdocs assumes no responsibility or liability for any errors
or inaccuracies that appear in this documentation.

The content of this manual is provided for information only, is subject to change without notice, and should
not be construed as a commitment by Actix. Actix assumes no responsibility or liability for any errors or
inaccuracies that appear in this documentation.

The product is protected under national and international copyright, trademark and trade secret, patent
and other intellectual property laws and treaties. The product is covered by at least one or more of the
following U.S. patents: 8364141; 7653395; 8032131; 7941136; 8150417; 7881319; 7830812; 7904080; 7839846;
7062264; 7349692; 7224968; 7792032; 7634267; 7353160; 8428171; 7877095; 7768968; 8855675; 9154977;
9380170; Sweden Patent: 524414; Great Britain Patents: 2,461,242; 2,467,474; 2,196,050; 1,759,549; 1,716,668;
1,678,972; 2,382,502; 2,384,663; 2,404,314; 1,606,965; Australia Patent: 2003301796; Patents registered in
China P.R.: 1,934,882; ZL200480007621.7; CN1817056; Patents registered with the European Patent Office:
EP1604278; EP1559289; EP1614313; EP2196049; French Patents: 2,196,050; 1,759,549; 1,716,668; 1,678,972;
1,468,542; 1,606,965; German Patents: 2,196,050; 1,759,549; 1,716,668; 1,678,972; 1,468,542; 102004002145;
103 07 408; 102 51 993.5; 101 04 926; Holland Patent: 2,196,050; India Patent: 1130/CHENP/2005; Italian
Patent: 2,196,050; Patents registered in Japan: 4,499,746; 4,452,710; JP549116/2004; JP5139462; JP6125530;
Patents registered in Korea: 10-11-21435; 10-09-39132; New Zealand Patent: NZ540378; Patents registered in
Spain: 2,196,050;1,606,965; and pending patents.

Copyright © 2007-2020 Actix, an Amdocs company. All rights reserved. All trademarks are hereby
acknowledged.

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 2 of 25

 Release Notes

Contents
In This Version ...................................................................................................................................... 4
Technology Improvements.............................................................................................................. 5
5G-NR support ............................................................................................................................................... 5

New collection device or technology support ........................................................................... 6

Accuver XCAL DRM support ....................................................................................................................... 6
Infovista TEMS support .................................................................................................................................. 7
Keysight Nemo support ................................................................................................................................ 7
PCTel DTR support ......................................................................................................................................... 7
Qualcomm QXDM / chipset support......................................................................................................... 8
Rohde & Schwarz ROMES4 support ......................................................................................................... 10
Rohde & Schwarz QualiPoc/SmartBenchmarker support ................................................................... 12
Samsung chipset support .......................................................................................................................... 12
Solutelia WINd support ............................................................................................................................... 13
Event Detection........................................................................................................................................... 15
General ......................................................................................................................................................... 15

Application Layer Improvements .................................................................................................17

Format Groups ............................................................................................................................................. 17

Platform Improvements ..................................................................................................................18

Local Activation Server Installation and admin web page ................................................................ 18
Message Browser......................................................................................................................................... 21
Superstreaming............................................................................................................................................ 21
Workgroup Data Area Configuration ...................................................................................................... 22

Documentation Changes .............................................................................................................24

Known Issues and Obsolescence.................................................................................................25
End of Life of Windows 7 support ............................................................................................................. 25

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 3 of 25

In This Version
This release contains support for new and updated file formats. There are updates for
most technologies that Analyzer supports, with changes falling under the following
categories:

• Technology improvements:
o 5GNR Handover event detection.
o Support added for Samsung Galaxy S20+ devices with TEMS Investigation.
o Improvements to Solutelia WINd Pro support for NR Scanners

• New collections of devices and improvements:

o Support for TEMS Investigation 22.0.
o Load speed improvements for XCAL 5GNR measurements.
o Header information extracted from XCAL and TEMS Investigation.
o Layer 1 throughput and data volume improvements for ROMES4.

• Platform improvements:
o Updated Local Activation Server administration microsite.
o Superstreaming improvements for matching stream and file names.
o Support for configuring shared Spotlight Workgroup areas in Windows 10.

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 4 of 25

Technology Improvements

5G-NR support
• Support added for 5GNR Handover event detection, with full decode of the NR-
RRC Measurement Report message:
o LTE_5GNSA_HO_Init
o LTE_5GNSA_HO_OK
o LTE_5GNSA_HO_Type
o LTE_5GNSA_HO_Stage
o LTE_5GNSA_HO_Stage_Duration
o LTE_5GNSA_HO_Duration
o LTE_5GNSA_HO_Fail
o LTE_5GNSA_HO_Fail_Cause
o LTE_5GNSA_HO_Fail_Stage

• Accuver XCAL improvements for 5GNR support:

o Support for NR Scan messages when collected with PCTel scanning
receivers.

o Load speed improvements when collected with 5GNR.

o Filtering support for Samsung Exynos chipset devices in Message Browser
and Protocol Stack Browser.

• Attribute support for NR TopN Scan messages (v2) from Solutelia WINd.

• Support added for 2 more variants of Samsung Galaxy S20+ 5GNR devices when
used with TEMS Investigation.

• Support added for per-technology physical layer data volume/throughput

attributes, and beam-specific measurements for Rohde & Schwarz ROMES4 tool.

• Updates to 7 Qualcomm log codes for 5GNR.

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 5 of 25

New collection device or technology support

Accuver XCAL DRM support

• Implemented support for Samsung Exynos NR chipset message filtering in the
Message Browser and Protocol Stack Browser.

• Support added for PCTel iBflex scanner devices, for both LTE and 5GNR.

• Support improvements for Samsung Galaxy S11 5G with Exynos 5100 family chipset,
decoding NR PHY SP PDCCH Statistics, and NR PHY SP PDSCH Statistics messages correctly
into Message Browser.

• Support added for Smart Phone Info message, setting attributes:

o ServMCC
o ServMNC
o ServPLMN

• Load speed improvements for 5G measurement files. When Load Time Message
Filtering is enabled, the following 5GNR messages are culled at load-time and will
not be presented in the logfile replay:
o NR 5G MAC UL TB Stats (0xB881)
o NR 5G MAC QOS BSR Report (0xB882)
o NR 5G MAC DCI Info (0xB885)
o NR 5G MAC UCI Information (0xB89B)
o NR 5G MAC LL1 PUSCH TX (0xB8A0)

• Resolved a problem where SpeedKph was incorrectly mapped to SpeedMph.

Both attributes are now set accurately.

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 6 of 25

Infovista TEMS support
• Updated TEMS Route Reader API to v22.0. This supports TEMS Investigation
22.0, Pocket 21.x, Sense 3.2.1, Paragon 3.2 and Voyager 2.3.1. New features of
TEMS Investigation 22.0 shall be supported in future releases.

• TEMS Route Reader API now requires .NET 4.8, which was added as a pre-
requisite of Analyzer in a previous release (AU2002 February Update).

• Support added for the Samsung Galaxy S20+ variants as a 5GNR devices:
o SM-G986U (Qualcomm Snapdragon)
o SM-G986B (Samsung Exynos)

• Support added for summary property values from TEMS Investigation, into the Independent
> Device Info grouping:
o TEMS_BuildDate
o TEMS_BuildVersion
o TEMS_Revision
o TEMS_Capabilities
o TEMS_MsIMEI
o TEMS_MsIMSI

• Support added for new speech path delay attributes from Audio MOS Downlink messages:
o Speech_Path_Delay_One_Way
o Speech_Path_Delay_RTT

Keysight Nemo support

• Resolved a problem where LTE_UE_CA_Active was not being set correctly when
multiple carrier components are detected, populating _for_Carrier[] attributes.

PCTel DTR support

• Added support for multiple MCC/MNC values to be reported in MX Blind Scan
messages, setting attributes:

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 7 of 25

 o Scan_PLMN
o LTE_Scan_MCC_SortedBy_RSRP
o LTE_Scan_MNC_SortedBy_RSRP
o LTE_Scan_EARFCN_SortedBy_RSRP_for_PLMN_*
o LTE_Scan_PCI_SortedBy_RSRP_for_PLMN_*
o LTE_Scan_RSRP_SortedBy_RSRP_for_PLMN_*
o LTE_Scan_RSRQ_SortedBy_RSRP_for_PLMN_*
o LTE_Scan_RSCINR_SortedBy_RSRP_for_PLMN_*

Qualcomm QXDM / chipset support

• Resolved a problem where LTE band 71 values of DL_EARFCN were incorrectly
showing as LTE band 72.

• Resolved a problem where SpeedKph was incorrectly mapped to SpeedMph.

Both attributes are now set accurately.

• Resolved a problem where the final values were incorrectly being reported for RLC
throughput (when spanning multiple messages). This has been corrected to use
the cumulative maximum number of data bytes in the throughput calculation.

• Support added for uplink data volume and throughput on the physical layer.
o Physical_DataVolume_UL, which is set with the following criterion:
o Inter-message time interval > 500ms
o A transition in Technology_Mode
o LTE_UL_TTI_Count > 500 (where UL bytes are reported)
o NR_UE_Meas_Timeinterval_ms > 500
o Physical_DataVolume_UL_LTE
o Physical_Throughput_UL_LTE
o Physical_DataVolume_UL_5GNR
o Physical_Throughput_UL_5GNR

• Support has been added for new versions of these messages:

o WCDMA L1 POWER CTRL SYNC v8 (0x4023), setting attributes:
o Uu_SIR
o WCDMA RLC UL Ciphering (0x4161), into the Message Browser.
o WCDMA RLC DL Ciphering (0x4162), into the Message Browser.
o WCDMA PN Search Ed.2 v7, v8 (0x4179), setting attributes:
o UTRA_UE_CarrierRssi
o UTRA_UE_CarrierRssi_Ant

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 8 of 25

 o Uu_ActiveSet_Count
o Uu_ActiveSet_SC
o Uu_ActiveSet_RSCP
o Uu_ActiveSet_EcNo
o WCDMA Temporal Analysis Ver2 v14 (0x4186), setting attributes:
o Uu_Finger_Count
o Uu_Finger_SC
o Uu_Finger_EcNo

o WCDMA Active Set (0x41AC), setting attributes:

o Uu_ActiveSet_Count
o Uu_ActiveSet_SC
o Uu_Downlink_UARFCN
o UL HS DPCCH Information Ver2 v4 (0x421C), setting attribute
Uu_HSDPA_CQI_Distribution.
o HS SCCH Statistics, v2 (0x421F), into the Message Browser.
o LTE ML1 GM Tx Report v33 (0xB16D) setting attributes:
o LTE_UE_NumBytes_UL
o LTE_UE_NumBytes_UL_for_Carrier
o NR 5G MMW Rx AGC (0x1C09), correcting the display of RSSI to be in dB
scale (instead of dB * 10).
o NR 5G RRC OTA v8 (0XB821), supporting DL-DCCH MeasResultSCG-Failure
message.

o NR 5G PDCP UL Stats v5 (0XB860), setting attributes:

o NR_UE_PDCP_NumBytes_UL
o NR_UE_Throughput_PDCP_UL
o NR 5G MAC UL Physical Channel Schedule Report v2.6 and v2.7 (0xB883),
setting attributes:
o NR_UE_MCS_UL
o NR_UE_NumBytes_UL
o NR_UE_PayloadRate_L1_UL
o NR_UE_RB_Num_UL
o NR_UE_TB_Size_Average_UL
o NR_UE_TB_Size_Max_UL
o NR 5G MAC CDRX Events Info v1.01 (0xB890), into the Message Browser.
o NR 5G ML1 Searcher Measurement Database Update Ext (0xB97F), setting
for_PCI / for_NRARFCN attributes:
o NR_UE_NRARFCN_*_RSRP_for_PCI_*

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 9 of 25

 o NR_UE_NRARFCN_*_RSRQ_for_PCI_*
o NR_UE_NRARFCN_*_SINR_for_PCI_*

Rohde & Schwarz ROMES4 support

• DQA DataTesting attributes are now merged into the UE stream, when loading
from SQC files.

• Support added for “Capacity” type tests for multiple FTP download tests.

• Resolved a problem where Task_App_Bytes_DL attribute was being set to an

incorrect value, and correctly set App_Layer_Active attribute only when
Task_Application_Type is set and at least one non-zero throughput value has
been reported.

• Resolved a problem in calculating LTE PDCP throughput. Instead of using the

Throughput information element, throughput is calculated using Data TP bits
transferred and converted into kbps.

• Resolved a problem where NR_UE_Throughput_RLC_DL was reporting non-sensible values.

The throughput is now compared to the L1 Payload Rate across the sum of all carriers to
ensure only sensible values are used.

• Resolved a problem with the reporting of UE Tx Power levels, displaying a label in the
Message Browser for the combined power to be “PUSCH and PUCCH”, not setting attributes
NR_UE_Power_Tx_PUSCH or NR_UE_Power_Tx_PUCCH if their values are greater than
23dBm, and setting NR_UE_Power_Tx_SRS, while not permitting their individual values to be
greater than PMax.

• Support improved for physical layer data volumes and throughputs for LTE and NR:
o LTE_UE_NumBytes_DL
o LTE_UE_NumBytes_DL_for_Carrier
o LTE_UE_NumBytes_UL = (BitsAcked + BitsNacked) / 8
o LTE_UE_NumBytes_UL_for_Carrier
o NR_UE_PayloadRate_L1_DL
o NR_UE_NumBytes_DL
o NR_UE_NumBytes_UL
o Physical_DataVolume_DL_5GNR

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 10 of 25

 o Physical_DataVolume_DL_5GNR_CA
o Physical_DataVolume_DL_5GNR_for_Carrier
o Physical_DataVolume_DL_5GNR_NonCA
o Physical_DataVolume_DL_LTE
o Physical_DataVolume_DL_LTE_CA
o Physical_DataVolume_DL_LTE_for_Carrier
o Physical_DataVolume_DL_LTE_LAA
o Physical_DataVolume_DL_LTE_NonCA
o Physical_DataVolume_MeasureInterval
o Physical_DataVolume_UL
o Physical_DataVolume_UL_5GNR
o Physical_DataVolume_UL_LTE
o Physical_Throughput_DL_5GNR
o Physical_Throughput_DL_5GNR_CA
o Physical_Throughput_DL_5GNR_for_Carrier
o Physical_Throughput_DL_5GNR_NonCA
o Physical_Throughput_DL_LTE
o Physical_Throughput_DL_LTE_CA
o Physical_Throughput_DL_LTE_for_Carrier
o Physical_Throughput_DL_LTE_LAA
o Physical_Throughput_DL_LTE_NonCA
o Physical_Throughput_Report_Invertal
o Physical_Throughput_UL_5GNR
o Physical_Throughput_UL_LTE

• Support added for LTE RACH events:

o LTE_RACH_AttemptOK
o LTE_RACH_AttemptFail
o LTE_UE_RACH_AttemptCount
o LTE_UE_RACH_AttemptResult
o LTE_UE_RACH_AttemptType
o LTE_UE_RACH_AttemptReason
o LTE_UE_RACH_AccessDelay

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 11 of 25

 • Resolved a problem where NR_UE_RACH_Fail events were triggered even
though Num Attempts was 0.

• Added support for NR beam-specific measurements, setting attributes:

o NR_UE_Beam_Idx_SortedBy_RSRP[*]
o NR_UE_Beam_PCIIndex_SortedBy_RSRP[*]
o NR_UE_Beam_RSRP_SortedBy_RSRP[*]
o NR_UE_Beam_RSRQ_SortedBy_RSRP[*]
o NR_UE_Beam_SINR_SortedBy_RSRP[*]

Rohde & Schwarz QualiPoc/SmartBenchmarker support

• Added support for automatically extracting indoor floorplan images from SQC
container files.

• Resolved a problem reported in the handset index of certain devices, which

prevented the correct decoding of messages.

• Added further message types to the SwissQual Log Code format group.

• Support added for Scanner LTE Pilots v2 message (version 5), to fully decode LTE
scanner measurements.

Samsung chipset support

• Resolved a problem where LTE_UE_Wideband_CQI_Average was being
reported as zero for periods during logfile measurements.

• Improvements made to support of LTE LL1 CA Cell message, formatting the message in the
Message Browser, triggering CA Active state, and setting associated CA attributes for RI, CQI,
DL Throughput for Carrier and UL Throughput for Carrier attributes while LTE_UE_CA_Active
= Yes.

• Support added for L1 Downlink Info2 message, setting attributes:

o LTE_UE_FrameUsage_DL
o LTE_UE_ModulationUsage_QPSK_DL
o LTE_UE_ModulationUsage_16QAM_DL
o LTE_UE_ModulationUsage_64QAM_DL
o LTE_UE_ModulationUsage_256QAM_DL

• Improved decoding of LTE L1 Downlink message, resolving the following problems:

o LTE_UE_MCS_Average_DL values of QPSK were being set incorrectly.
o Improved setting of attributes, where (Resource Block Number > 0) AND
(MCS Modulation [0] > 0) AND ((PDSCH ACK Count + PDSCH NACK Count)
> 0):

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 12 of 25

 o LTE_UE_ACK_Rate_DL
o LTE_UE_NACK_Rate_DL
o LTE_UE_Modulation_Avg_DL
o LTE_UE_MCS_Average_DL
o LTE_UE_RB_Num_DL
o LTE_UE_MIMO_2TB_MCS_Cwd0_DL
o LTE_UE_MIMO_2TB_MCS_Cwd1_DL
o LTE_UE_BLER_DL

• Improved decoding of LTE L1 Uplink message, resolving the following problems:

o Improved setting of attributes, where (Resource Block Counter > 0) AND
(Resource Block Number > 0) and (MCS Modulation > 0), only setting per
channel power levels when not reported as -48dBm:
o LTE_UE_Power_Tx_PUSCH
o LTE_UE_Power_Tx_PUCCH
o LTE_UE_Power_Tx_PRACH
o LTE_UE_Power_Tx_SRS
o LTE_UE_RB_Num_UL
o LTE_UE_MCS_Average_UL
o LTE_UE_PathLoss_DL

Solutelia WINd support

• Support added for LTE_Scan_* MIMO scanner attributes at Enhanced TopN Scan
Message (v6), extracting the antennae RSRP/RSRQ/CINR values per DL_EARFCN
and per PCI:

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 13 of 25

 • Support added for setting all NR_Scan_* scanner attributes at NR TopN Scan
message (v2), corrected minor typo in message text for “Repeat Pattern” field,
decoded the protocol fields from PCTel, and decoded subversion 2 of the beam-
specific subframe:

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 14 of 25

Event Detection
• Improvements made to the VoLTE call event detection, to include SIP_Reason_Text =
“Dedicated Bearer Lost” as a VoIP_Event_Layer_NormalBYECondition. These
BYE commands now trigger the LTE_Event_VoLTE_CallDrop event.

• Added support for NR Handover events:

o LTE_5GNSA_HO_Init
o LTE_5GNSA_HO_OK
o LTE_5GNSA_HO_Type
o LTE_5GNSA_HO_Stage
o LTE_5GNSA_HO_Stage_Duration
o LTE_5GNSA_HO_Duration
o LTE_5GNSA_HO_Fail
o LTE_5GNSA_HO_Fail_Cause
o LTE_5GNSA_HO_Fail_Stage

General
• Support added for System Information-NB (BCCH-DL-SCH-NB) message,
formatting the following information elements in the Message Browser correctly:
o npdcch-StartSF-CSS-RA-r13
o npdcch-Offset-RA-r13

• Added support for decoding NR_RRC_* attributes from NR UL-DCCH

MeasurementReport messages:

o NR_RRC_MeasResultServMO_ServingCell_*

• NR_RRC_MeasResultNeighCells_measResultListNR_*

• Created technology-specific groupings of physical layer data volume and

throughputs, according to Downlink and Uplink Measurements:

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 15 of 25

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 16 of 25
Application Layer Improvements

Format Groups
• Format group for SwissQual Log Code has been extended to show all supported message
names.

• Improvements made to the range coloring of LTE Modulation format group (used
for LTE and NR modulation attributes):
o BPSK = black
o QPSK = red
o 16QAM = yellow
o 64QAM = green
o 256QAM = blue
o 1024QAM = purple

• Samsung Log Code format group has been extended to report the LTE message
types already supported, a selection of which are shown below:

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 17 of 25

Platform Improvements

Local Activation Server Installation and admin web page

• The administration microsite for the Local Activation Server (previously known as
Mini-Act Server) has been improved, with increased reporting per client softkey,
client usage, and the ability to query the server diagnostics remotely. Once
installed, browse to the site using the following URL: http://machinename/gui
or http://localhost/gui when run locally on the server.

• The Local Activation Server is now maintained with a version number, available in
the banner of the administration web page, along with its softkey ID and most
recent activation date.

• The “hamburger” menu on the left rotates when the menu is opened. The menu
slides in Chrome browsers and appears in IE browser.

• The Summary page (landing page when opening the microsite) shows the overview of all
softkeys hosted by this Local Activation Server. It shows the number of available client
licenses, and the maximum number of days a client license on that softkey may be taken
offline. The lower half of the screen is a per-user usage report, allowing investigation of
which licenses are currently in use for each user (including their session ID):

• The License Detail page shows the individual details of each softkey, as well as
the licensed features for each softkey. Features maybe of Full License,
Evaluation, Term or Pay Before type. The associated expiry date of each feature
is also listed, as it their relative Support Expiry dates. Expired dates for Full
License (support), Term and Pay Before types are shown in red font, whilst
expired Evaluation features are hidden from this view.

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 18 of 25

 • The Usage Report page allows the user to select a softkey (or choose “All
Softkeys”), select dates from/to and display a usage summary below when the
Run Report option is selected. The Export CSV option allows the same report to
be downloaded. If no data is present, the “No data found” warning is displayed in
the table, and the Export CSV option is disabled:

• The Server Admin page is restricted to only users who have a specified LDAP
group in their user profile (default = Administrators). The user may select a
softkey and configure the server Name, the Domain Group of users permitted to
use this client softkey, and set the maximum number of days a client license may
be taken offline (Max Offline Days, numerical, 1-31). It is also possible to
remotely Run Diagnostics of the server itself, to generate a text report, which
can then be copied into an email for Product Support:

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 19 of 25

 • Once set, the Domain Group field is no longer able to be edited. Care should be
taken to set this Domain Group initially for the softkey.

• When a user who has insufficient privileges to access the Server Admin page
attempts to access the page, the administration microsite will return the following
error page. The same page is intended for occasions where the server has not yet
been activated, when the “Unauthorizes Access” warning message shall be
replaced with “Activate the Server”.

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 20 of 25

 • The Local Activation Server installation wizard has been updated with Amdocs
branding and updated copyright:

Message Browser
• New button has been added into the Message Browser Preferences dialog
(Message Format tab), to reset the Message Browser font back to the default
settings (Courier New, 8 point regular):

Superstreaming
• The SuperStreaming capability has been extended to allow text matching by
Filename and Streamname. The options have been changed to check-boxes,
allowing either (or both) options to be selected, and when the Matching button is
clicked, the search string will be used to select matching streams/filenames:

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 21 of 25

Workgroup Data Area Configuration
• The utility provided with Analyzer (AtxWorkgroupConfig.EXE) has been improved:
o Resolved a problem which prevented the Browse button from being used to
set the shared folder location.

o The Server Name field has been extended to permit longer server names
when concatenated with “ACTIXSQLEXPRESS”.

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 22 of 25

 o Resolved a problem which prevented configuring the server details, or
setting a shared data location for shared Spotlight Workgroup projects, for
users on Windows 10. The utility needs to be executed using the “Run as
administrator” option from the right-click menu:

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 23 of 25

Documentation Changes
• None

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 24 of 25

Known Issues and Obsolescence

End of Life of Windows 7 support

• Advance notice is given that from the end of June 2020, support for Actix Analyzer
running on Windows 7 shall be deprecated, and support cases shall no longer be
accepted if they relate to issues arising from this OS version, following its
withdrawal from Microsoft’s Windows Update program on 14th January 2020.

© 2020 – Proprietary Information of Actix Ltd, an Amdocs company Page 25 of 25