61WG/30WG: Water-Sourced Liquid Chillers/Heat Pumps With or Without Integrated Hydronic Module

Water-Sourced Liquid Chillers/Heat Pumps
with or without Integrated Hydronic Module
www.eurovent-certification.com
www.certiflash.com
Standard unit
Unit with optional
hydronic module
61WG/30WG
Nominal cooling capacity 24-95 kW
Nominal heating capacity 30-116 kW
The new generation of 61WG heat pumps and 30WG liquid 61WG - optimised for heating
chillers was designed for commercial applications (offices, ■■ High temperature up to +65°C
hotels etc.), residential applications (houses, apartments ■■ Evaporator temperature down to -5°C
etc.) or industrial applications (low-temperature cooling ■■ Needle valve control of domestic hot water
or domestic hot-water production etc.).
30WG - optimised for air conditioning
The 61WG units were especially designed for heating
■■ Evaporator temperature down to -12°C
applications with a leaving water temperature of 65°C
■■ Condenser temperature up to +60°C
(without supplementary heating) and a COP of above 5.
■■ Three-way valve control of the condensing pressure
--
The 30WG units were designed for air-conditioning
applications with an exceptionally high ESEER value. Detail view of the variable-speed pump
A large number of options is available for both versions:

-- hydronic kits with or without variable water flow rate,
-- reinforced sound insulation,
-- stacking and connection of two units, or operation with
low-temperature glycol solution down to -12°C. This product
range offers a unique combination of high performance
and functionality in an exceptionally compact chassis.
Features
■■ Reduced footprint
■■ R-410A scroll compressor
■■ Variable-flow pump
■■ Low-noise option (-3 dB(A))
■■ Stacking of two units for increased capacity
■■ Compatible communication protocols: JBus, BacNet, LON
■■ Water connection at the top or rear
The right unit for any application Water connections at the rear of the unit
■■ The high temperature of the 61WG units makes them
compatible with most heat sources, both in new and
refurbished buildings and permits domestic hot water
production in significant quantities (dual setpoint).
■■ The 61WG uses weather compensation control and controls
four supplementary electric heating stages or a relief boiler.
■■ The 30WG includes automatic three-way valve control of
the condensing pressure for optimised operation, even at
low outside temperature.
■■ Option 157 (heating system manager) allows control of
systems with several heat sources and different supplement-
ary systems: electric heat, boiler or district heating for the
most complex systems.
Adaptability and simple installation

■■ Complete hydronic kit for both evaporator and condenser
with different levels of available pressure, with variable or
fixed speed (see photos on the following pages).
■■ Needle valve control for easier transition from the comfort
mode to domestic hot water production using a collection
tank (not supplied) Water connections at the top of the unit
■■ Reversibility by water flow inversion in the system.
■■ Pro-Dialog+ control and compatibility with the Aquasmart
system
■■ Units available with connections at the top or at the rear
(see photos)
Internal view of 61WG unit with hydronic kit
2
A compact high-performance product range Two-unit stacking option for reduced footprint
■■ Small footprint, ideal for refurbished buildings, allows
access in very tight plant rooms.
■■ 61WG: A COP above 5 satisfies even the most stringent
standards, with a leaving water temperature of up to 65°C
without supplementary system.
■■ 30WG: The ESEER of over 5.5 for dual-compressor units
- one of the highest in its category.
■■ The variable water flow (VWF) technology of the variable-
flow pump, optimises system operation and enhances energy
efficiency.
■■ The standard low sound level allows installation in any
building type and the low-noise option ensures enhanced
acoustic comfort (-3 dB(A)).
■■ 61WG and 30WG units are equipped with the latest
generation R410A scroll compressor, optimised for high-
performance robust water-to-water units.
Component acessibility
See photos below.
Access to scroll compressors
Access to control panel
3
Pro-Dialog+ interface ■ Remote control option
Pro-Dialog+ permits control and monitoring of the unit
using a wired interface:
-- Start/stop,
-- Operating mode selection: cooling or heating,
\\MAINMENU\STATUS
-- Demand limit,
CAPB_T
DEM_LIM
0
100
%
%
-- Dual setpoint,
SP
CTRL_PNT
4.2
-28.9
°C
°C -- User safety loop.
EMSTOP dsable
Circuit B Total Capacity The control remotely reports any problem.
START/STOP ENTER
The CCN clock board connection offers other control
PRO-DIALOG+ possibilities:
Two independent time schedules to control:
-- Unit start/stop,
-- Operation at a second chilled-water setpoint (for example:
Pro-Dialog+ control unoccupied mode),
Pro-Dialog+ is a numerical control that combines intelligence -- Operation of two units in parallel (master/slave function),
with operating simplicity. Depending on the options used, and remote control via a communication bus (RS 485
the unit manages the operation of compressors, evaporaor serial port).
and condenser water pumps and fans (drycooler)
30WG compatible the Carrier 09 series drycoolers
■■ Optimised energy management
The drycoolers of the Carrier 09 series are supplied ready
-- A patented auto-adaptive algorithm optimises the
for installation with a control box. A simple communication
condensing pressure at part load to reduce compressor bus connects the unit to the heat rejection unit. As all control
load and ensure perfect supply for the evaporator with components are installed and tested in the factory, installa-
liquid refrigerant. The algorithm controls the operation tion and start-up of the unit and its associated drycooler
of the variable-speed condenser water pump and the are simplified.
fans (drycooler)
-- Pro-Dialog+ automatically resets the chilled-water
temperature setpoint based on the outside air temperature
or the return water temperature. The control can also
operate on a second setpoint (example: unoccupied mode).
■■ Total unit protection
-- A patented auto-adaptive algorithm controls compressor
operation and permanently adapts to the system charac-
teristics (water loop inertia). Dangerous compressor
cycling is prevented. The unit can operate safely with a
low water volume, and this frequently makes a buffer
tank unnecessary (see minimum water volume later in
this document).
-- Pro-Dialog+ permanently analyses the compressor
suction and discharge pressures and temperatures. If an
abnormal situation is detected, the control reacts, e.g. by
reducing the capacity. As a result the compressors always
operate in their ideal temperature range and many unit
shut-downs due to a fault can be prevented.
■ Ease-of-use
-- The Pro-Dialog+ interface includes five keys that permit
navigation via intuitive tree-structure menus. Access to
the information is very quick.
-- This new backlit LCD interface includes control by a
contrast potiometer for optimised visibility in all lighting
conditions.
-- The information is clearly displayed in English, French,
German, Italian and Spanish (for other languages please
consult Carrier Service).
-- The Pro-Dialog+ navigation uses intuitive tree-structure
menus, similar to the Internet navigators. The menus are
user-friendly and permit quick access to the principal
operating parameters: number of compressors operating,
suction/discharge pressure, compressor operating hours,
setpoint, temperatures.
4
Options
Options No. Description Advantages Use
Very low temperature glycol solution 6 Low temperature glycol solution production down Covers specific applications such as ice 30WG 020-090
to -12°C with ethylene glycol storage and industrial processe
Soft starter 25 Electronic compressor starter Reduced compressor start-up current 30WG 020-090
61WG 020-090
Twinning 58 Unit equipped with an additional field-installed Optimised operation of two units connected 30WG 020-090
leaving water temperature sensor, allowing in parallel with operating time equalisation 61WG 020-090
master/slave operation of two units connected
in parallel.
External disconnect handle 70F The handle of the electrical disconnect switch is Quick access to the unit disconnect switch 30WG 020-090
on the outside of the unit 61WG 020-090
Condenser insulation 86 Thermal condenser insulation Optimisation for heating applications 61WG 020-090
Low-pressure single-pump hydronic module, 116F See hydronic module chapter Easy and fast installation 30WG 020-090
evaporator side 61WG 020-090
High-pressure single-pump hydronic module, 116J See hydronic module chapter Easy and fast installation, reduced power 30WG 020-090
evaporator side consumption of the water circulation pump. 61WG 020-090
JBus gateway 148B Two-directional communications board, complies Easy connection by communication bus to 30WG 020-090
with JBus protocol a building management system 61WG 020-090
BacNet gateway 148C Two-directional communications board, complies Easy connection by communication bus to 30WG 020-090
with BacNet protocol a building management system 61WG 020-090
LON gateway 148D Two-directional communications board, complies Easy connection by communication bus to 30WG 020-090
with LON protocol a building management system 61WG 020-090
Specific single-source heating control 153 Control board factory-installed on the unit, Permits easy control of a basic heating 61WG 020-090
control using weather compensation, control of system
supplementary electric heater (4 stages) or boiler,
needle valve for domestic hot-water production
with programmable time schedule.
Specific cooling control 154 Control box to be installed on the Carrier drycooler Permits the use of an energy-efficient plug- 30WG 020-090
for communication with the unit via a bus. and-play system
Control of multi-source heating system 157 Additional control box for remote installation to Allows control of pre-configured heating 61WG 020-090
control the various heating system components systems
Low sound level (-3 dB(A) compared to 257 Compressor sound insulation 30WG 020-090
standard unit) 61WG 020-090
Evaporator screw connection sleeves 264 Evaporator inlet/outlet screw connection sleeves Allows unit connection to a screw 30WG 020-090
connector 61WG 020-090
Screw water connection between the 265 Condenser inlet/outlet screw connection sleeves Allows unit connection to a screw 30WG 020-090
customer condenser and the unit connector 61WG 020-090
Welded evaporator connection sleeves 266 Welded evaporator inlet/outlet connection Allows welding of customer connections 30WG 020-090
sleeves to the unit 61WG 020-090
Welded water connection between the 267 Welded condenser inlet/outlet connection Allows welding of customer connections 30WG 020-090
customer condenser and the unit sleeves to the unit 61WG 020-090
Low-pressure single-pump hydronic module, 270F See hydronic module chapter Easy and fast installation 30WG 020-090
condenser side 61WG 020-090
High-pressure hydronic module with single 270J See hydronic module chapter Easy and fast installation, reduced power 30WG 020-090
variabe-speed pump, condenser side consumption of the water circulation pump. 61WG 020-090
High-temperature water production, 272 Condenser side water production up to 65°C, Geothermal application and domestic hot- 61WG 020-090
condenser side, with glycol solution on the with glycol solution on the evaporator side to -5°C water production
evaporator side
Unit stackable for operation 273 Unit stackable for operation Reduced footprint size 30WG 020-090
61WG 020-090
Customer water connection at the top of the 274 Customer water connection at the top of the unit Reduced footprint size 30WG 020-090
unit 61WG 020-090
Remote user interface 275 User interface for remote installation Remote control of the unit and its operating 30WG 020-090
parameters 61WG 020-090
5
Hydronic module (options 116F, 270F)
Typical water piping diagram
4 5 15
1 PT TT
Unit water inlet Components of unit and hydronic module
7 9
3 6 1 Victaulic screen filter
2 Expansion tank
3 Safety valve
Condenser water loop 4 Water pump
5 Air vent
6 Water drain valve
TT PT 7/8 Entering/leaving pressure sensor
Unit water outlet 9/10 Entering/leaving temperature probe
12 Flow switch 61WG option 272 (sizes 020-045 only)
2 13 Compressor
10 8
6 14 Evaporator
13 16 15 Condenser
16 Expansion device
4 5 14
1 PT TT NOTE: Units without hydronic module include a flow switch.
Unit water inlet

7 9
6
3
Evaporator water loop

TT PT
Unit water outlet
12 10 8
6
Physical data, units with hydronic module

61WG/30WG (option 116J/270J) 020 025 030 035 040 045 050 060 070 080 090
Operating weight* kg 305 313 313 321 327 334 513 521 533 544 574
Height** mm 1463 1463 1463 1463 1463 1463 1463 1463 1463 1463 1463
Hydronic module
Maximum operating pressure kPa 300 300 300 300 300 300 300 300 300 300 300
Water filter (max. removed particle diameter) mm 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2
Expansion tank capacity*** l 8 8 8 8 8 8 12 12 12 12 12
Water connections in 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2
* Weight shown is a guideline only. .
** The length and width dimensions are the same as for the standard unit.
*** When delivered, the standard pre-inflation of the tanks is not necessary the optimal value for the system. To permit changing the water volume, change the inflation pressure to a pressure that is
close to the static head of the system. Fill the system with water (purging the air) to a pressure value that is 10 to 20 kPa higher than the pressure in the tank.
Electrical data, options 116F, 270F

The original pumps that are factory-installed in these units This regulation regards the application of directive
have motors with efficiency class IE2. The additional 2005/32/CE on the eco-design requirements for electric
electrical data required by regulation 640/2009 are given in motors.
the installation, operation and maintenance instructions.
6
Available static pressure (options 116, 270)
Fixed-speed low-pressure pumps, 61WG/30WG Variable-speed high-pressure pumps, 61WG/30WG
(options 116F - 270F) (options 116J - 270J)
220 220
200 200
180 180 5
160 160
Pressure head, kPa

Pressure head, kPa
140 3 140 4
120 2 120
100 100
1
80 80
60 60
40 40
20 20
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 0 1 2 3 4 5 6 7 8 9 10 11 12
Water flow rate, l/s Water flow rate, l/s
1 61WG-30WG 020-050
2 61WG-30WG 060-080 4 61WG-30WG 020-045
3 61WG-30WG 090 5 61WG-30WG 050-090
7
Physical data 61WG units
61WG 020 025 030 035 040 045 050 060 070 080 090
Heating capacity* kW 29.0 34.4 38.3 44.2 50.2 57.2 68.6 78.2 88.4 100 117
Power input kW 5.3 6.5 7.4 8.4 9.4 10.8 12.5 14.6 16.2 19.0 21.9
Coefficient of performance (COP) kW/kW 5.42 5.29 5.20 5.29 5.34 5.32 5.49 5.36 5.46 5.28 5.33
Eurovent class, heating A A A A A A A A A A A
Cooling capacity kW 23.7 28.0 31.0 36.0 40.9 46.6 56.2 63.8 72.4 81.3 94.9
EER kW/kW 4.43 4.30 4.21 4.30 4.35 4.33 4.50 4.37 4.47 4.29 4.34
Heating capacity** kW 21.7 25.7 29.4 34.1 37.7 42.1 50.4 56.7 67.1 74.6 87.0
Power input kW 5.1 6.0 6.9 8.0 8.8 9.9 11.9 13.3 15.7 17.4 20.3
EER kW/kW 3.25 3.27 3.29 3.28 3.28 3.26 3.26 3.28 3.27 3.29 3.30
Nominal heating capacity*** kW 27.7 33.1 36.7 42.7 48.7 54.8 66.4 75.7 84.2 95.3 109.00
Power input kW 6.4 7.6 8.8 10.0 11.3 12.6 14.7 17.5 19.3 22.3 25.3
Eurovent class, heating B B B B B B A B B B B
EER kW/kW 3.36 3.35 3.20 3.28 3.33 3.37 3.52 3.33 3.36 3.28 3.32
Heating capacity**** kW 26.1 31.1 34.2 40.0 43.8 49.8 62.0 71.5 77.2 86.3 98.6
Power input kW 8.3 10.0 11.4 13.0 14.5 16.0 19.7 22.6 24.8 28.2 31.8
EER kW/kW 2.13 2.13 2.02 2.09 2.03 2.12 2.15 2.17 2.13 2.07 2.11
Sound levels†
Sound power level 10-12 W, standard unit dB(A) 67.0 68.5 69.0 69.3 70.0 70.1 71.5 72.0 72.0 73.0 73.4
Operating weight kg 191 200 200 207 212 220 386 392 403 413 441
Compressors Hermetic scroll 48.3 r/s
Quantity 1 1 1 1 1 1 2 2 2 2 2
Number of capacity stages 1 1 1 1 1 1 2 2 2 2 2
Minimum capacity % 100% 100% 100% 100% 100% 100% 50% 50% 50% 50% 50%
Dimensions, standard unit††
Width mm 600 600 600 600 600 600 880 880 880 880 880
Depth mm 1044 1044 1044 1044 1044 1044 1474 1474 1474 1474 1474
Height mm 901 901 901 901 901 901 901 901 901 901 901
Refrigerant‡ R410A
Charge, standard unit kg 3.5 3.5 3.6 3.7 4.0 4.6 7.6 7.8 7.9 8.7 11.5
Charge, unit with option 272 kg 2.7 2.9 2.9 3.0 3.2 3.9 7.2 7.3 7.4 7.6 10.5
Oil 160SZ
Charge per compressor l 3 3.3 3.3 3.3 3.3 3.6 3.3 3.3 3.3 3.3 3.6
Control Pro-Dialog+
Evaporator Direct-expansion plate heat exchanger
Water volume l 3.3 3.6 3.6 4.2 4.6 5.0 8.4 9.2 9.6 10.4 12.5
Water connections Victaulic
Inlet/outlet in 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2
Max. water-side operating pressure kPa 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
without hydronic module
Condenser Plate heat exchanger
Net water volume l 3.3 3.6 3.6 4.2 4.6 5.0 8.4 9.2 9.6 10.4 12.5
Inlet/outlet in 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2
ote: All performances are net values as specified by EN14511-3 2011.
N
* Conditions in heating mode: evaporator water entering/leaving temp. = 10°C/7°C, condenser water entering/leaving temp. = 30°C/35°C, evaporator and condenser fouling factor = 0
** Conditions in heating mode: evaporator water entering/leaving temp. = 0°C/-3°C, condenser water entering/leaving temp. = 30°C/35°C, evaporator and condenser fouling factor = 0
*** Conditions in heating mode: evaporator water entering/leaving temp. = 10°C/7°C, condenser water entering/leaving temp. = 40°C/45°C, evaporator and condenser fouling factor = 0
**** Conditions in heating mode: evaporator water entering/leaving temp. = 10°C/7°C, condenser water entering/leaving temp. = 55°C/65°C, evaporator and condenser fouling factor = 0
† In accordance with ISO 9614-1, measured in a free field. The sound levels only apply to units without options
†† The dimensions shown are for the standard unit. For other unit types please refer to the dimensional drawings.
‡ Weight shown is a guideline only. To find out the unit refrigerant charge, please refer to the unit nameplate.
8
Physical data 30WG units
30WG 020 025 030 035 040 045 050 060 070 080 090
Nominal cooling capacity* kW 24.6 28.7 31.5 36.7 41.8 46.6 58.1 63.4 73.8 83.9 94.6
Power input kW 5.2 6.1 6.7 7.8 8.9 9.9 12.3 13.6 15.7 18.1 20.2
EER kW/kW 4.72 4.72 4.69 4.73 4.69 4.72 4.72 4.65 4.69 4.65 4.68
Eurovent class, cooling B B B B B B B B B B B
Part load performance ESEER kW/kW 5.09 5.09 5.02 5.04 5.03 5.07 5.84 5.91 5.84 6.04 5.98
Heating capacity kW 29.8 34.7 38.1 44.4 50.7 56.4 70.3 76.9 89.4 101.8 114.5
Nominal cooling capacity** kW 33.9 39.3 43.0 50.1 56.6 65.6 78.6 86.0 101.7 113.2 129.4
Power input kW 5.3 6.4 7.1 8.3 9.6 10.8 12.8 14.4 16.4 19.1 21.1
EER kW/kW 6.42 6.10 6.03 6.04 5.90 6.06 6.12 5.95 6.19 5.93 6.13
Eurovent class, cooling A A A A A A A A A A A
Nominal cooling capacity*** kW 20.0 23.5 25.2 29.6 34.1 37.5 46.8 52.3 57.6 67.1 73.5
Power input kW 8.1 9.2 10.0 11.8 13.2 14.9 18.7 20.7 23.6 25.6 29.7
EER kW/kW 2.48 2.54 2.51 2.49 2.57 2.52 2.51 2.53 2.44 2.62 2.47
Sound levels****
Sound power level 10-12 W dB(A) 67.0 68.5 69.0 69.3 70.0 70.1 71.5 72.0 72.0 73.0 73.4
Operating weight kg 191 200 200 207 212 220 386 392 403 413 441
Compressors Hermetic scroll 48.3 r/s
Quantity 1 1 1 1 1 1 2 2 2 2 2
Number of capacity stages 1 1 1 1 1 1 2 2 2 2 2
Minimum capacity % 100% 100% 100% 100% 100% 100% 50% 50% 50% 50% 50%
Dimensions, standard unit†
Width mm 600 600 600 600 600 600 880 880 880 880 880
Depth mm 1044 1044 1044 1044 1044 1044 1474 1474 1474 1474 1474
Height mm 901 901 901 901 901 901 901 901 901 901 901
Refrigerant†† R410A
Charge, standard unit kg 3.5 3.5 3.6 3.7 4.0 4.6 7.6 7.8 7.9 8.7 11.5
Oil 160SZ
Charge per compressor l 3 3.3 3.3 3.3 3.3 3.6 3.3 3.3 3.3 3.3 3.6
Control Pro-Dialog+
Evaporator Direct-expansion plate heat exchanger
Water volume l 3.3 3.6 3.6 4.2 4.6 5.0 8.4 9.2 9.6 10.4 12.5
Inlet/outlet in 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2
Condenser Plate heat exchanger
Net water volume l 3.3 3.6 3.6 4.2 4.6 5.0 8.4 9.2 9.6 10.4 12.5
Inlet/outlet in 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2
Note: All performances are net values as specified by EN14511-3 2011.
* Eurovent conditions in cooling mode: evaporator water entering/leaving temp. = 12°C/7°C, condenser water entering/leaving temp. = 30°C/35°C, evaporator and condenser fouling factor = 0
** Conditions in cooling mode, chilled beam and under-floor cooling: evaporator water entering/leaving temp. = 18°C/23°C, condenser water entering/leaving temp. = 30°C/35°C, evaporator and
condenser fouling factor = 0
*** Conditions in cooling and heating mode (domestic hot water production): evaporator water entering/leaving temp. = 12°C/7°C, condenser water entering/leaving temp. = 50°C/55°C, evaporator
and condenser fouling factor = 0
**** In accordance with ISO 9614-1, measured in a free field. The sound levels only apply to units without options.
† The dimensions shown are for the standard unit. For other unit types please refer to the dimensional drawings.
†† Weight shown is a guideline only. To find out the unit refrigerant charge, please refer to the unit nameplate.
9
Electrical data 61WG/30WG
61WG 020 025 030 035 040 045 050 060 070 080 090
Power circuit
Nominal voltage V-ph-Hz 400-3-50
Voltage range V 360-440
Control circuit supply 24 V, via internal transformer
Maximum start-up current draw (Un)*
Standard unit A 98 142 142 147 158 197 164 166 175 189 233
Unit with electronic starter option A 53.9 78.1 78.1 80.9 86.9 108.4 100.1 102.1 108.9 117.9 144.4
Unit power factor at maximum capacity** 0.83 0.82 0.84 0.83 0.82 0.84 0.82 0.82 0.83 0.82 0.84
Maximum operating power input** kW 9.7 11.4 12.7 14.6 16.5 18.6 22.8 25.4 29.2 33 37.2
Nominal unit operating current draw*** A 10.5 13.2 13.8 15.6 16.2 20.2 26.4 27.6 31.2 32.4 40.4
Maximum operating current draw (Un)**** A 16.1 19.6 21.1 24.4 26.7 30.9 39.2 42.2 48.8 53.4 61.8
Maximum operating current draw (Un-10%) † A 19 22 24 28 31 36 44 48 56 62 72
Customer-side unit power reserve Customer reserve at the 24 V control power circuit
Short-circuit stability and protection See table below "Short-circuit stability current"
30WG 020 025 030 035 040 045 050 060 070 080 090
Power circuit
Nominal voltage V-ph-Hz 400-3-50
Voltage range V 360-440
Control circuit supply 24 V, via internal transformer
Maximum start-up current draw (Un)*
Standard unit A 98 142 142 147 158 197 163 165 174 188 233
Unit with electronic starter option A 53.9 78.1 78.1 80.9 86.9 108.4 100.1 102.1 108.9 117.9 144.4
Unit power factor at maximum capacity** 0.83 0.82 0.84 0.83 0.82 0.84 0.82 0.82 0.83 0.82 0.84
Maximum operating power input** kW 9.1 10.7 11.7 13.6 15 17 21.4 23.4 27.2 30 34
Nominal unit operating current draw*** A 10.6 12.9 13.3 15.2 16.5 19.7 25.8 26.6 30.4 33 39.4
Maximum operating current draw (Un)**** A 15.6 18.7 19.8 23.2 25.4 29 37.4 39.6 46.4 50.8 58
Maximum operating current draw (Un-10%) † A 18 21 23 27 30 36 42 46 54 60 72
Customer-side unit power reserve Customer reserve at the 24 V control power circuit
Short-circuit stability and protection See table below "Short-circuit stability current"
* Maximum instantaneous start-up current at operating limit values (maximum operating current of the smallest compressor(s) + fan current + locked rotor current of the largest compressor).
** Power input, compressors and fans, at the unit operating limits (saturated suction temperature 10°C, saturated condensing temperature 65°C) and nominal voltage of 400 V (data given on the unit
nameplate).
*** Standardised Eurovent conditions: evaporator entering/leaving water temperature 12°C/7°C, outside air temperature 35°C.
**** Maximum unit operating current at maximum unit power input and 400 V (values given on the unit nameplate).
† Maximum unit operating current at maximum unit power input and 360 V.
Short-circuit stability current (TN system*) - standard unit

(with main disconnect switch)
61WG/30WG 020 025 030 035 040 045 050 060 070 080 090
Value without upstream protection
Short-term current at 1 s - Icw - kA rms 3 3 3 3 3 3 3 3 3 3 3
Admissible peak current - Ipk - kA pk 6 6 6 6 6 6 6 6 6 6 6
Value with upstream protection (circuit breaker)
Conditional short-circuit current Icc - kA rms 40 40 40 40 40 40 40 40 40 40 40
Schneider circuit breaker - Compact series NSX 100N
Reference number** LV429795
* Earthing system type
** If another current limitation protection system is used, its time-current and thermal constraint (I²t) trip characteristics must be at least equivalent to those of the recommended Schneider circuit
breaker. Contact your nearest Carrier office.
The short-circuit stability current values above are in accordance with the TN system.
10
Part load performances
With the rapid increase in energy costs and the care about ESEER (EUROVENT)
environmental impacts of electricity production, the power The ESEER (European seasonal energy efficiency ratio)
consumption of air conditioning equipment has become permits evaluation of the average energy efficiency at part
an important topic. The energy efficiency of a unit at full load, based on four operating conditions defined by
load is rarely representative of the actual performance of Eurovent. The ESEER is the average value of energy
the units, as on average a unit works less than 5% of the efficiency ratios (EER) at different operating conditions,
time at full load. weighted by the operating time.
The heat load of a building depends on many factors, such ESEER (European seasonal energy efficiency ratio)
as the outside air temperature, the exposure to the sun
and its occupation. Load Air temperature Energy Operating
% °C efficiency fime, %
100 35 EER1 3
Consequently it is preferable to use the seasonal energy
75 30 EER2 33
efficiency, calculated at several operating points that are
50 25 EER3 41
representative for the unit utilisation.
25 20 EER4 23
ESEER = EER1 x 3% + EER2 x 33% + EER3 x 41% + EER4 x 23%
Note: Constant leaving water temperature = 7°C
30WG 020 025 030 035 040 045 050 060 070 080 090
Standard units
ESEER kW/kW 5.09 5.09 5.02 5.04 5.03 5.07 5.84 5.91 5.84 6.04 5.98
Sound spectrum
61WG/30WG - standard unit 61WG/30WG - Unit with low-noise option (option 257)
Octave bands, Hz Sound power Octave bands, Hz Sound power
125 250 500 1k 2k 4k level 125 250 500 1k 2k 4k level
020 dB(A) 60.1 52.8 51.6 63.2 60.8 56.5 dB(A) 67.0 020 dB(A) 58.7 57.9 49.8 60.3 57.2 51.2 dB(A) 65.0
025 dB(A) 63.9 56.3 55.7 63.2 59.8 58.2 dB(A) 68.5 025 dB(A) 58.2 57.4 55.2 61.6 57.5 54.2 dB(A) 65.8
030 dB(A) 61.1 58.8 57.6 64.0 62.6 59.9 dB(A) 69.0 030 dB(A) 58.2 57.4 55.5 60.8 58.7 54.3 dB(A) 65.8
035 dB(A) 64.1 59.2 59.0 63.9 61.2 57.8 dB(A) 69.3 035 dB(A) 58.2 57.4 58.5 62.2 58.8 53.8 dB(A) 66.6
040 dB(A) 58.6 59.7 58.4 66.7 63.6 58.5 dB(A) 70.0 040 dB(A) 63.9 58.2 56.4 63.6 59.8 53.0 dB(A) 68.4
045 dB(A) 56.9 56.1 56.8 66.2 64.8 62.1 dB(A) 70.1 045 dB(A) 58.2 57.4 56.3 64.6 62.5 58.0 dB(A) 68.4
050 dB(A) 47.2 59.6 64.6 67.9 65.7 56.3 dB(A) 71.5 050 dB(A) 47.5 57.4 61.0 65.4 61.8 50.7 dB(A) 68.4
060 dB(A) 43.2 60.9 65.2 67.5 67.2 56.7 dB(A) 72.0 060 dB(A) 43.2 58.5 61.3 64.7 63.1 50.9 dB(A) 68.6
070 dB(A) 46.3 61.4 66.8 67.4 65.9 54.8 dB(A) 72.0 070 dB(A) 46.6 59.4 63.3 65.0 62.2 49.3 dB(A) 69.0
080 dB(A) 40.1 61.2 65.4 69.6 67.6 54.8 dB(A) 73.0 080 dB(A) 39.4 58.1 60.9 66.1 62.8 48.2 dB(A) 69.0
090 dB(A) 50.6 64.1 63.9 69.2 68.9 58.4 dB(A) 73.4 090 dB(A) 50.4 61.5 59.8 66.2 64.6 52.3 dB(A) 69.9
Electrical data notes and operating conditions:

• 61WG and 30WG units have a single power connection point, located - presence of water: class AD2 (possibility of water droplets)
immediately upstream of the main disconnect switch. - presence of hard solids, class 4S2 (no significant dust present)
• The control box includes the following standard features: - presence of corrosive and polluting substances, class 4C2 (negligible)
- a main disconnect switch, - vibration and shock, class AG2, AH2
- the starter and motor protection devices for each compressor and the pumps - competence of personnel, class BA4* (trained personnel ‑ IEC 60364)
- the control devices 2. Power supply frequency variation: ± 2 Hz.
• Field connections: 3. The neutral (N) conductor must not be connected directly to the unit (if
All connections to the system and the electrical installations must be in full necessary use a transformer).
accordance with all applicable local codes. 4. Over-current protection of the power supply conductors is not provided with
• The Carrier 61WG and 30WG units are designed and built to ensure the unit.
conformance with these codes. The recommendations of European standard 5. The factory-installed disconnect switch(es)/circuit breaker(s) is (are) of a type
EN 60204-1 (machine safety ‑ electrical machine components ‑ part 1: general suitable for power interruption in accordance with EN 60947.
regulations - corresponds to IEC 60204-1) are specifically taken into account, 6. The units are designed for simplified connection on TN(s) networks (IEC 60364).
when designing the electrical unit equipment. For IT networks provide a local earth and consult competent local organisations
to complete the electrical installation.
7. Derived currents: If protection by monitoring of derived currents is necessary to
Notes:
ensure the safety of the installation, the control of the cut-out value must take the
• Generally the recommendations of IEC 60364 are accepted as compliance
presence of leak currents into consideration that result from the use of frequency
with the requirements of the installation directives. Conformance with EN
converters in the unit. A value of at least 150 mA is recommended to control
60204-1 is the best means of ensuring compliance with the Machines Directive
differential protection devices.
§ 1.5.1.
• Annex B of EN 60204-1 describes the electrical characteristics used for the
NOTE: If particular aspects of an actual installation do not conform to the
operation of the machines.
conditions described above, or if there are other conditions which should
1. The operating conditions for the units are specified below:
be considered, always contact your local Carrier representative.
Environment* ‑ Environment as classified in IEC 60364 § 3:
- ambient temperature range: +5°C to +40°C, class AA4
- humidity range (non-condensing)*: * The protection level of the control boxes required to conform to this class is
- 50% relative humidity at 40°C IPX1B (according to reference document IEC 60529). All 61WG and 30WG
- 90% relative humidity at 20°C units fulfil this protection condition.
- altitude: ≤ 2000 m (see note for table 4.5 in the IOM) Units equipped with front casing panel meet class IP23. If the casing panel has
- indoor installation* been removed, access to energised components is protected to level IPXXB.
11
Operating limits, 61WG Operating limits, 30WG
61WG Minimum Maximum 30WG Minimum Maximum
Evaporator Evaporator
Entering water temperature at start-up °C 7.5* 27 Entering water temperature at start-up °C 7.5* 27
Leaving water temperature during operation °C 5** 20 Leaving water temperature during operation °C 5** 20
Entering/leaving water temperature difference K 2.5 7 Entering/leaving water temperature difference K 2.5 7
Condenser Condenser
Entering water temperature at start-up °C 15*** 60**** Entering water temperature at start-up °C 15*** 55****
Leaving water temperature during operation °C 20 65 Leaving water temperature during operation °C 20 60
* For entering water temperatures below 7.5°C at start-up, contact Carrier. * For entering water temperatures below 7.5°C at start-up, contact Carrier.
** If the leaving water temperature is below 5°C, a frost protection solution must be used. ** If the leaving water temperature is below 5°C, a frost protection solution must be used.
Please refer to option 6 for evaporator leaving water low-temperature applications (< 5°C). Please refer to option 6 for evaporator leaving water low-temperature applications (< 5°C).
*** For applications with a condenser entering air temperature below 15°C the use of a *** For applications with a condenser entering air temperature below 15°C the use of a
three-way valve is recommended. This three-way valve can be controlled by the 0-10 V three-way valve is recommended. This three-way valve can be controlled by the 0-10 V
analogue output of the Pro-Dialog+ control. analogue output of the Pro-Dialog+ control.
**** For a water flow rate that corresponds to a maximum water-side temperature difference of 5 K. **** For a water flow rate that corresponds to a maximum water-side temperature difference of 5 K.
61WG + option 272 (geothermal application) Minimum Maximum 30WG + option 6 Minimum Maximum
Evaporator Evaporator
Entering water temperature at start-up °C -2.5* 25 Entering water temperature at start-up °C -9.5* 27
Leaving water temperature during operation °C -5* 20 Leaving water temperature during operation °C -12* 20
Condenser Condenser
Entering water temperature at start-up °C 15** 60*** Entering water temperature at start-up °C 15** 55***
Leaving water temperature during operation °C 20 65 Leaving water temperature during operation °C 20 60
* A frost protection solution must be used. Note: Do not exceed the maximum operating temperature.
** For applications with a condenser entering air temperature below 15°C the use of a * A frost protection solution must be used.
three-way valve is recommended. This three-way valve can be controlled by the 0-10 V ** For applications with a condenser entering air temperature below 15°C the use of a
analogue output of the Pro-Dialog+ control. three-way valve is recommended. This three-way valve can be controlled by the 0-10 V
*** For a water flow rate that corresponds to a maximum water-side temperature difference of 5 K. analogue output of the Pro-Dialog+ control.
*** For a water flow rate that corresponds to a maximum water-side temperature difference of 5 K.
Operating range, 61WG 30WG + drycooler

Evaporator
Minimum Maximum
Entering water temperature at start-up °C 7.5* 27

Condenser leaving water temperature, °C
65 Leaving water temperature during operation °C 5** 20

Entering/leaving water temperature difference K 2.5 7
60
Condenser without hydronic kit
55
Entering air temperature at start-up + during °C 10-15*** 40-45****
50 operation
Option 272 Standard
45 Condenser with option 270J (kit with variable-speed pump)
40 Entering air temperature at start-up+ during °C -10† 40-45****
35 operation
* For entering water temperatures below 7.5°C at start-up, contact Carrier.
30
** If the leaving water temperature is below 5°C, a frost protection solution must be used.
25 Please refer to option 6 for evaporator leaving water low-temperature applications (< 5°C).
20 *** The minimum entering air temperature is based on the drycooler selection.
**** The maximum entering air temperature is based on the drycooler selection.
15 † For applications with a low condenser entering air temperature the use of a three-way valve
-8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 is recommended. This thre-way valve can be controlled by the 0-10 V analogue output of the
Pro-Dialog+ control.
Evaporator leaving water temperature, °C

61WG standard unit
61WG unit with option 272 (brine to water)
Operating range, 30WG
Option 272: Condenser-side high-temperature water production, with glycol solution on
the evaporator side
65
60
55
50
45
Option 6 Standard
40
35
30
25
20
15
-14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20
30WG standard unit

30WG unit with option 6 (brine)
Option 6: Very low-temperature glycol solution
12
Water loop volume
Evaporator and condenser ■■ Industrial process cooling
Certain industrial process applications may require high
■■ Minimum volume
stability of the leaving water temperature levels. In this
A minimum water volume is required for correct unit case the values above must be increased.
operation. The minimum water loop volume can be ■■ Maximum volume
calculated in accordance with the following formula: Units with hydronic module incorporate an expansion
tank sized for the maximum water loop volume.
Volume = CAP(kW) x N* = litres, where CAP is the
cooling capacity at nominal operating conditions. The table below gives the maximum water loop volume
(in litres) for pure water or ethylene glycol with various
Air conditioning application N* concentrations.
61WG/30WG 020-090 3.5
61WG/30WG 020-045 060-090

The water volume in the condenser loop has no impact on Static pressure kPa 100 200 300 100 200 300
the operation of the unit. bar 1 2 3 1 2 3
Pure water l 220 450 75 340 225 115
Note: In the heat pump mode (unit control based on the 10% ethylene glycol l 165 110 53 255 170 85
hot-water temperature) the minimum volume of the 20% ethylene glycol l 100 70 35 150 100 50
condenser loop must be calculated the same way as for the 35% ethylene glycol l 85 55 30 130 85 45
evaporator loop, replacing the cooling capacity with the
heating capacity.
13
Water flow rates
Standard 61WG Standard 30WG
61WG Evaporator water flow rate, l/s 30WG Evaporator water flow rate, l/s
Minimum* Minimum** Maximum*** Maximum**** Minimum* Minimum** Maximum*** Maximum****
Low High Low High Low High Low High
pressure pressure pressure pressure pressure pressure pressure pressure
020 1.1 0.9 0.5 3.1 3.6 3.8 020 1.0 0.9 0.5 3.1 3.6 3.8
025 1.0 1.0 0.5 3.3 3.8 4.1 025 1.0 1.0 0.5 3.3 3.8 4.1
030 1.0 1.0 0.5 3.3 3.8 4.1 030 1.0 1.0 0.5 3.3 3.8 4.1
035 1.1 1.1 0.6 3.6 4.2 4.7 035 1.1 1.1 0.6 3.6 4.2 4.7
040 1.1 1.1 0.6 3.8 4.4 5.0 040 1.2 1.1 0.6 3.8 4.4 5
045 1.2 1.1 0.8 4.0 4.6 5.4 045 1.2 1.1 0.8 4.0 4.6 5.4
050 1.6 1.4 0.8 5.4 7.8 9.2 050 1.6 1.4 0.8 5.4 7.8 9.2
060 1.5 1.5 1.0 6.1 8.0 9.9 060 1.5 1.5 1.0 6.1 8.0 9.9
070 1.6 1.5 1.1 6.2 8.1 10.3 070 1.6 1.5 1.1 6.2 8.1 10.3
080 1.6 1.5 1.3 6.3 8.3 10.9 080 1.6 1.5 1.3 6.3 8.3 10.9
090 2.0 1.6 1.5 7.8 8.7 12.5 090 2.0 1.6 1.5 7.8 8.7 12.5
* Minimum flow rate for a maximum permitted temperature difference at the minimum leaving * Minimum flow rate for a maximum permitted temperature difference at the minimum leaving
water temperature (unit with hydronic module) water temperature (unit with hydronic module)
** Minimum flow rate for a water temperature difference of 7 K (unit without hydronic module) ** Minimum flow rate for a water temperature difference of 7 K (unit without hydronic module)
*** Maximum flow rate for an available pressure of 20 kPa (unit with low-pressure hydronic *** Maximum flow rate for an available pressure of 20 kPa (unit with low-pressure hydronic
module) or 50 kPa (unit with high-pressure hydronic module) module) or 50 kPa (unit with high-pressure hydronic module)
**** Maximum flow rate for a pressure drop of 100 kPa in the plate heat exchanger (unit without **** Maximum flow rate for a pressure drop of 100 kPa in the plate heat exchanger (unit without
hydronic module) hydronic module)
61WG Condenser water flow rate, l/s 30WG Condenser water flow rate, l/s
Minimum* Maximum** Maximum*** Minimum* Maximum** Maximum***
Low pressure Low pressure High pressure Low pressure Low pressure High pressure
020 0.3 3.1 3.5 3.8 020 0.3 3.1 3.5 3.8
025 0.3 3.3 3.8 4.1 025 0.3 3.3 3.8 4.1
030 0.3 3.3 3.8 4.1 030 0.3 3.3 3.8 4.1
035 0.4 3.5 4.1 4.7 035 0.4 3.5 4.1 4.7
040 0.4 3.7 4.3 5.0 040 0.4 3.7 4.3 5.0
045 0.4 3.9 4.5 5.4 045 0.4 3.9 4.5 5.4
050 0.4 4.8 6.8 7.0 050 0.4 4.8 6.8 7.0
060 0.5 5.5 7.0 7.5 060 0.5 5.5 7.0 7.5
070 0.5 5.6 7.2 7.8 070 0.5 5.6 7.2 7.8
080 0.6 5.8 7.4 8.2 080 0.6 5.8 7.4 8.2
090 0.6 7.2 7.9 9.3 090 0.6 7.2 7.9 9.3
* Minimum flow rate for a water temperature difference of 18 K (unit with or without hydronic * Minimum flow rate for a water temperature difference of 18 K (unit with or without hydronic
module) module)
** Maximum flow rate for an available pressure of 20 kPa (unit with low-pressure hydronic ** Maximum flow rate for an available pressure of 20 kPa (unit with low-pressure hydronic
module) or 50 kPa (unit with high-pressure hydronic module) module) or 50 kPa (unit with high-pressure hydronic module)
*** Maximum flow rate for a pressure drop of 100 kPa in the plate heat exchanger (unit without *** Maximum flow rate for a pressure drop of 100 kPa in the plate heat exchanger (unit without
hydronic module) hydronic module)
61WG with option 272 30WG with option 6
61WG Minimum evaporator water flow rate - option 272*, l/s 30WG Minimum evaporator water flow rate - option 6*, l/s
Minimum** Minimum*** Minimum** Minimum***
Low pressure High pressure Low pressure High pressure
020 0.3 0.3 0.3 020 0.7 0.6 0.5
025 0.3 0.3 0.3 025 0.8 0.7 0.5
030 0.3 0.3 0.3 030 0.8 0.7 0.5
035 0.4 0.4 0.4 035 0.9 0.7 0.6
040 0.4 0.4 0.4 040 1.0 0.7 0.6
045 0.5 0.5 0.5 045 1.0 0.8 0.8
050 0.8 0.9 0.5 050 1.4 1.1 0.8
060 1.0 1.0 0.5 060 1.0 1.1 1.0
070 1.0 1.1 0.6 070 1.0 1.2 1.1
080 1.1 1.2 0.7 080 1.1 1.2 1.3
090 1.1 1.4 0.7 090 1.2 1.2 1.5
* Option 272: Condenser side high-temperature water production, with glycol solution, * Option 6: glycol solution, very low temperature
evaporator side ** Minimum flow rate for a maximum permitted temperature difference at the minimum leaving
** Minimum flow rate for a maximum permitted temperature difference at the minimum leaving water temperature (unit with hydronic module)
water temperature (unit with hydronic module) *** Minimum flow rate for a maximum permitted temperature difference at the minimum leaving
*** Minimum flow rate for a maximum permitted temperature difference at the minimum leaving water temperature (unit without hydronic module)
water temperature (unit without hydronic module)
14
Plate heat exchanger pressure drop (includes internal piping)
Evaporator - standard unit without hydronic module
61WG/30WG 020-045 61WG/30WG 050-090
150 180
140 170
130 160
150
120 140
110 130
Pressure drop, kPa

Pressure drop, kPa
100 120
90 110
100
80 90
70 80
60 70
60
50 50
40 40
30 30
20 20
10
10 0
0 -10
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 61WG-30WG 020 6 61WG-30WG 050
2 61WG-30WG 025 to 61WG-30WG 030 7 61WG-30WG 060
3 61WG-30WG 035 8 61WG-30WG 070
4 61WG-30WG 040 9 61WG-30WG 080
5 61WG-30WG 045 10 61WG-30WG 090
Condenser - standard unit without hydronic module
61WG/30WG 020-045 61WG/30WG 050-090
150 180
140 170
130 160
150
120 140
110 130
Pressure drop, kPa
Pressure drop, kPa
100 120
90 110
100
80 90
70 80
60 70
50 60
50
40
40
30 30
20 20
10 10
0 0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 0 1 2 3 4 5 6 7 8 9 10 11 12 13
1 61WG-30WG 020 6 61WG-30WG 050
2 61WG-30WG 025 to 61WG-30WG 030 7 61WG-30WG 060
3 61WG-30WG 035 8 61WG-30WG 070
4 61WG-30WG 040 9 61WG-30WG 080
5 61WG-30WG 045 10 61WG-30WG 090
15
Available static system pressure (fixed or variable-speed
high-pressure pumps, units with hydronic module)
Evaporator
61WG/30WG 020-045 61WG/30WG 050-090
210 160
150
190
140
170
Pressure head, kPa
Pressure head, kPa

130
150 120
110
130
100
110 90
90 80
70
70
60
50 50
0 1 2 3 4 5 6 7 8 9 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
1 61WG-30WG 020 6 61WG-30WG 050

2 61WG-30WG 025 to 61WG-30WG 030 7 61WG-30WG 060
3 61WG-30WG 035 8 61WG-30WG 070
4 61WG-30WG 040 9 61WG-30WG 080
5 61WG-30WG 045 10 61WG-30WG 090
Condenser
61WG/30WG 020-045 61WG/30WG 050-090
210 160
190 150
140
170
Pressure head, kPa
130
Pressure head, kPa
150 120
110
130
100
110 90
90 80
70
70
60
50 50
0 1 2 3 4 5 6 7 8 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
1 61WG-30WG 020 6 61WG-30WG 050

2 61WG-30WG 025 to 61WG-30WG 030 7 61WG-30WG 060
3 61WG-30WG 035 8 61WG-30WG 070
4 61WG-30WG 040 9 61WG-30WG 080
5 61WG-30WG 045 10 61WG-30WG 090
16
Available static system pressure (fixed or variable-speed low-
pressure pumps, units with hydronic module)
Evaporator
61WG/30WG 020-045 61WG/30WG 050-090
110 160
150
100 140
90 130
Pressure head, kPa

Pressure head, kPa
120
80 110
70 100
90
60 80
50 70
60
40 50
40
30
30
20 20
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 1 2 3 4 5 6 7 8
1 61WG-30WG 020 6 61WG-30WG 050

2 61WG-30WG 025 to 61WG-30WG 030 7 61WG-30WG 060
3 61WG-30WG 035 8 61WG-30WG 070
4 61WG-30WG 040 9 61WG-30WG 080
5 61WG-30WG 045 10 61WG-30WG 090
Condenser
61WG/30WG 020-045 61WG/30WG 050-090
110 160
150
100
140
90 130
Pressure head, kPa
Pressure head, kPa
120
80 110
70 100
90
60 80
50 70
60
40 50
30 40
30
20 20
0.0 0.5 1.0 1.5 2.0 2.,5 3.0 3.5 4.0 0 1 2 3 4 5 6 7 8
1 61WG-30WG 020 6 61WG-30WG 050

2 61WG-30WG 025 to 61WG-30WG 030 7 61WG-30WG 060
3 61WG-30WG 035 8 61WG-30WG 070
4 61WG-30WG 040 9 61WG-30WG 080
5 61WG-30WG 045 10 61WG-30WG 090
17
Dimensions/clearances
61WG/30WG 020-045 - standard unit
Only for option 70F
160 237 625
5
2 1
901
470
470
3
153
153
161 237 600

2 1 1044
1058
900 700
4
700
3
4 4
700
61WG/30WG 020-045 - unit with top connections (option 274)
4
700
901
938
600
1044
Legend:
900 86 700 All dimensions are in mm.
Evaporator
4 Condenser
700
Safety valve
Clearances required for maintenance (see note)
105
Control box
104
1 Water inlet
4 4
Water outlet
2 Power wiring connection
105
143
700
NOTE: Non-contractual drawings. Refer to the certified dimensional drawings

available on request, when designing an installation.
18
61WG/30WG 020-045 - unit with evaporator hydronic module (option 116)
Only for option 70F
379 625
5
1
1463
868
470
704
3
153
153
161 237
600
1 1044
2
1058
900
700
4
700
3
4 4
4
700
61WG/30WG 020-045 - unit with condenser hydronic module (option 270)

142
2
2
Legend:
All dimensions are in mm.
398
1 Evaporator
Condenser
Safety valve
161
470
Control box
623
Water inlet
Water outlet
Power wiring connection
153
398
1
61WG/30WG 020-045 - unit with evaporator/condenser hydronic modules (options 116 + 270)
142 237
2 1
2
1021
161
1
623
153
398
19
61WG/30WG 020-045 - unit with hydronic module and top connections (options 116 + 274 - 270 + 274 - 116 +
270 + 274)
4
700
1500
1463
1044
167 86
900 1
4 1
700
221
4
143 237
4
700
4
2
167 86 700 2
61WG/30WG 020-045 - stackable unit (option 273)
NOTE: The water and electrical connections are identical to those of the standard unit.
1841
1014
1014
1058 600
Legend:
900 700 All dimensions are in mm.
Evaporator
700
4 Condenser
Safety valve
Control box
4 4 Water inlet
Water outlet

700
4
20
61WG/30WG 050-090 - standard unit
Only for option 70F

252 310 905
5 3
1
2
901
450
456
451
204
201
880
2 253 310 1474
1
1489
900 700
700
4 4
4
700
61WG/30WG 050-090 - unit with top connections (option 274)

700
4
938
901
1474 880
Legend:
900 80 700 All dimensions are in mm.
Evaporator
Condenser
700
4
Safety valve
Control box
1
142 168 142
Water inlet
4 4 Water outlet
2 Power wiring connection
253

700
4
21
61WG/30WG 050-090 - unit with evaporator hydronic module (option 116)
Only for option 70F
558
905
5
2 1
1463
1021
252
704
657
204
880
253 307 1474
2 1 1488
Legend:
900 All dimensions are in mm.
700
Evaporator
4
700
Condenser
Safety valve
3
4 4 Control box
Water inlet
Water outlet
4
700
61WG/30WG 050-090 - unit with condenser hydronic module (option 270)

277
1
1021
252
657
204
559
1
61WG/30WG 050-090 - unit with evaporator/condenser hydronic modules (options 116 + 270)
277 282
1
2
1021
252
657
204
NOTE: Non-contractual drawings. Refer to the

559 certified dimensional drawings available on
1 request, when designing an installation.
22
61WG/30WG 050-090 - unit with hydronic module and top connections (options 116 + 274 - 270 + 274 - 116 +
270 + 274)
4
700
1463
1500
1474
900 172 80
1
4
700
4 4
282
278
700
2
172 80 700
2
61WG/30WG 050-090 - stackable unit (option 273)
NOTE: The water and electrical connections are identical to those of the standard unit.
1841
1014
1014
880
1489
Legend:
All dimensions are in mm.
900 700
Evaporator
Condenser
700
4
Safety valve
Control box
Water inlet
4 4 Water outlet
700
4 NOTE: Non-contractual drawings. Refer to the certified dimensional

drawings available on request, when designing an installation.
23
Heating capacities, 61WG - standard units
25 35 45 55 65
61WG LWT CAP UNIT COP Flow DP CAP UNIT COP Flow DP CAP UNIT COP Flow DP CAP UNIT COP Flow DP CAP UNIT COP Flow DP
kW/ kW/ kW/ kW/ kW/
°C kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
kW kW kW kW kW
020 5 28.7 4.5 6.31 1.4 15 27.3 5.3 5.17 1.3 13 26.3 6.3 4.16 1.3 12 25.7 7.2 3.58 0.6 5 24.4 8.6 2.83 0.6 5
025 33.7 5.6 6.04 1.6 18 32.4 6.4 5.07 1.6 16 31.4 7.5 4.18 1.5 14 30.6 8.5 3.61 0.7 5 29.1 10.3 2.83 0.7 5
030 36.7 6.2 5.95 1.8 20 35.3 7.2 4.90 1.7 18 34.0 8.6 3.95 1.6 16 33.1 9.8 3.38 0.8 5 31.2 11.7 2.68 0.8 5
035 43.4 7.1 6.12 2.1 22 41.9 8.3 5.07 2.0 20 40.5 9.9 4.10 1.9 18 39.5 11.2 3.52 1.0 5 37.6 13.4 2.81 0.9 5
040 49.0 7.9 6.21 2.3 24 47.5 9.3 5.13 2.3 22 46.3 11.2 4.15 2.2 20 44.1 12.7 3.48 1.1 5 40.7 14.8 2.76 1.0 5
045 55.7 9.1 6.14 2.7 26 53.6 10.5 5.09 2.6 23 51.6 12.4 4.17 2.5 21 49.1 13.8 3.55 1.2 5 46.1 16.4 2.81 1.1 5
050 67.0 10.6 6.31 3.2 21 64.8 12.3 5.27 3.1 19 62.9 14.5 4.33 3.0 17 60.8 16.7 3.65 1.5 5 57.0 20.1 2.83 1.4 5
060 77.1 12.3 6.28 3.7 25 74.0 14.4 5.14 3.5 22 72.0 17.5 4.12 3.5 20 70.2 19.9 3.53 1.7 5 66.5 23.0 2.89 1.6 5
070 86.8 13.5 6.42 4.1 29 83.4 16.0 5.21 4.0 26 79.5 19.2 4.14 3.8 23 76.4 21.8 3.51 1.8 5 72.4 25.6 2.82 1.8 5
080 96.9 15.7 6.19 4.6 32 94.4 18.6 5.08 4.5 29 90.0 22.0 4.09 4.3 26 85.9 24.8 3.46 2.1 6 80.6 28.8 2.80 2.0 5
090 114.5 18.2 6.31 5.5 35 109.7 21.4 5.12 5.3 31 102.8 25.0 4.11 4.9 26 97.9 28.0 3.49 2.4 6 92.3 32.8 2.81 2.2 5
020 6 29.6 4.6 6.42 1.4 16 28.1 5.3 5.28 1.3 14 26.9 6.3 4.24 1.3 13 26.3 7.2 3.65 0.6 5 25.0 8.6 2.89 0.6 5
025 34.8 5.7 6.14 1.7 19 33.4 6.5 5.16 1.6 16 32.2 7.6 4.25 1.5 15 31.3 8.5 3.68 0.8 5 29.9 10.3 2.89 0.7 5
030 38.3 6.3 6.09 1.8 22 36.7 7.3 5.04 1.8 19 35.3 8.7 4.06 1.7 17 34.3 9.8 3.48 0.8 5 32.4 11.7 2.76 0.8 5
035 44.6 7.2 6.21 2.1 23 43.0 8.3 5.16 2.1 21 41.5 10.0 4.17 2.0 19 40.4 11.3 3.59 1.0 5 38.6 13.5 2.87 0.9 5
040 50.4 8.0 6.30 2.4 26 48.7 9.3 5.22 2.3 23 47.4 11.2 4.22 2.3 21 45.3 12.8 3.55 1.1 5 41.7 14.8 2.82 1.0 5
045 57.6 9.2 6.24 2.7 28 55.2 10.6 5.19 2.6 25 53.0 12.5 4.25 2.5 22 50.7 13.9 3.64 1.2 6 47.5 16.5 2.88 1.2 5
050 69.2 10.8 6.42 3.3 23 66.6 12.4 5.37 3.2 20 64.5 14.6 4.41 3.1 18 62.2 16.7 3.72 1.5 5 58.7 20.2 2.90 1.4 5
060 79.3 12.5 6.37 3.8 26 76.0 14.5 5.24 3.6 23 73.7 17.5 4.21 3.5 21 72.1 20.0 3.61 1.7 5 68.5 23.1 2.96 1.7 5
070 89.2 13.7 6.52 4.3 31 85.7 16.1 5.32 4.1 27 81.7 19.3 4.23 3.9 24 78.4 21.8 3.60 1.9 6 74.2 25.6 2.90 1.8 5
080 99.5 15.9 6.27 4.7 34 97.0 18.8 5.17 4.6 31 92.4 22.2 4.17 4.4 27 88.1 24.9 3.54 2.1 6 82.7 28.8 2.87 2.0 5
090 117.7 18.4 6.39 5.6 37 112.9 21.7 5.21 5.4 33 105.6 25.2 4.20 5.1 28 100.5 28.1 3.58 2.4 7 94.7 32.8 2.89 2.3 6
020 7 30.5 4.7 6.53 1.5 17 28.9 5.4 5.39 1.4 15 27.6 6.4 4.33 1.3 13 26.9 7.2 3.72 0.6 5 25.7 8.7 2.96 0.6 5
025 35.9 5.8 6.23 1.7 20 34.3 6.5 5.26 1.6 17 33.0 7.6 4.32 1.6 15 32.0 8.5 3.74 0.8 5 30.7 10.4 2.95 0.7 5
030 39.9 6.4 6.21 1.9 24 38.1 7.4 5.16 1.8 21 36.5 8.8 4.16 1.8 19 35.4 9.9 3.57 0.9 5 33.6 11.8 2.85 0.8 5
035 45.9 7.3 6.31 2.2 24 44.1 8.4 5.26 2.1 22 42.5 10.0 4.25 2.0 20 41.3 11.3 3.66 1.0 5 39.5 13.5 2.93 1.0 5
040 51.8 8.1 6.39 2.5 27 50.0 9.4 5.31 2.4 24 48.5 11.3 4.29 2.3 22 46.5 12.8 3.63 1.1 6 42.8 14.9 2.88 1.0 5
045 59.5 9.4 6.34 2.8 29 56.9 10.8 5.29 2.7 26 54.5 12.6 4.33 2.6 23 52.3 14.1 3.72 1.3 6 48.9 16.6 2.95 1.2 5
050 71.4 10.9 6.52 3.4 24 68.4 12.5 5.47 3.3 21 66.2 14.7 4.49 3.2 19 63.7 16.8 3.80 1.5 5 60.4 20.3 2.98 1.5 5
060 81.6 12.6 6.46 3.9 27 78.0 14.6 5.34 3.7 24 75.5 17.6 4.30 3.6 22 73.9 20.0 3.69 1.8 5 70.6 23.2 3.04 1.7 5
070 91.7 13.8 6.63 4.4 32 88.1 16.2 5.43 4.2 29 83.9 19.4 4.33 4.0 25 80.5 21.8 3.69 1.9 6 76.2 25.6 2.98 1.8 5
080 102.3 16.1 6.35 4.9 36 99.7 19.0 5.25 4.8 33 94.9 22.3 4.25 4.6 29 90.5 25.0 3.62 2.2 7 84.9 28.9 2.94 2.1 6
090 121.1 18.7 6.48 5.8 39 116.1 21.9 5.30 5.6 35 108.6 25.4 4.28 5.2 29 103.2 28.2 3.66 2.5 7 97.2 32.8 2.96 2.4 6
020 8 31.4 4.7 6.64 1.5 18 29.7 5.4 5.50 1.4 16 28.3 6.4 4.42 1.4 14 27.5 7.2 3.80 0.7 5 26.3 8.7 3.03 0.6 5
025 37.0 5.8 6.33 1.8 21 35.3 6.6 5.36 1.7 18 33.8 7.7 4.40 1.6 16 32.7 8.6 3.81 0.8 5 31.4 10.4 3.02 0.8 5
030 41.4 6.5 6.33 2.0 25 39.4 7.5 5.29 1.9 22 37.7 8.8 4.26 1.8 20 36.5 9.9 3.66 0.9 5 34.7 11.9 2.93 0.8 5
035 47.2 7.4 6.41 2.3 26 45.2 8.4 5.35 2.2 23 43.6 10.1 4.33 2.1 20 42.3 11.4 3.72 1.0 5 40.5 13.5 2.99 1.0 5
040 53.3 8.2 6.48 2.5 28 51.3 9.5 5.40 2.5 25 49.7 11.4 4.37 2.4 23 47.8 12.9 3.70 1.2 6 44.0 15.0 2.94 1.1 5
045 61.5 9.6 6.44 2.9 31 58.6 10.9 5.38 2.8 27 56.0 12.7 4.42 2.7 24 53.9 14.2 3.80 1.3 6 50.4 16.7 3.02 1.2 5
050 73.6 11.1 6.63 3.5 26 70.2 12.6 5.57 3.4 22 67.9 14.8 4.57 3.3 20 65.2 16.8 3.87 1.6 5 62.2 20.4 3.05 1.5 5
060 83.9 12.8 6.55 4.0 29 80.0 14.7 5.44 3.8 25 77.3 17.6 4.39 3.7 23 75.5 20.0 3.78 1.8 5 72.6 23.3 3.11 1.8 5
070 94.3 14.0 6.73 4.5 34 90.4 16.3 5.54 4.3 30 86.1 19.4 4.43 4.1 26 82.6 21.8 3.79 2.0 6 78.2 25.5 3.06 1.9 5
080 105.2 16.4 6.43 5.0 38 102.4 19.2 5.34 4.9 34 97.5 22.5 4.34 4.7 30 92.9 25.1 3.70 2.2 7 87.1 29.0 3.01 2.1 6
090 124.6 19.0 6.55 5.9 41 119.3 22.1 5.39 5.7 36 111.6 25.5 4.37 5.4 31 106.0 28.3 3.75 2.6 7 99.7 32.8 3.04 2.4 6
020 10 33.4 4.9 6.86 1.6 20 31.4 5.5 5.73 1.5 17 29.8 6.5 4.59 1.4 15 28.8 7.3 3.96 0.7 5 27.7 8.7 3.17 0.7 5
025 39.3 6.0 6.51 1.9 23 37.3 6.7 5.55 1.8 20 35.5 7.8 4.54 1.7 18 34.1 8.6 3.95 0.8 5 33.0 10.5 3.14 0.8 5
030 43.8 6.7 6.51 2.1 28 41.5 7.6 5.48 2.0 24 39.7 9.0 4.43 1.9 22 38.4 10.0 3.82 0.9 6 36.8 11.9 3.08 0.9 5
035 49.8 7.5 6.60 2.4 28 47.6 8.6 5.55 2.3 25 45.7 10.2 4.49 2.2 22 44.2 11.4 3.86 1.1 6 42.5 13.6 3.11 1.0 5
040 56.3 8.5 6.66 2.7 31 53.9 9.7 5.59 2.6 28 52.0 11.5 4.52 2.5 25 50.3 13.0 3.85 1.2 7 46.3 15.1 3.06 1.1 5
045 65.6 9.9 6.64 3.1 35 62.2 11.1 5.58 3.0 30 59.1 12.9 4.58 2.8 27 57.2 14.4 3.97 1.4 7 53.3 16.9 3.16 1.3 6
050 78.2 11.5 6.83 3.7 29 74.0 12.8 5.78 3.5 25 71.3 15.1 4.73 3.4 22 68.3 16.9 4.03 1.6 5 65.2 20.5 3.19 1.6 5
060 88.7 13.2 6.72 4.2 32 84.2 14.9 5.65 4.0 28 81.1 17.7 4.58 3.9 25 79.0 19.9 3.97 1.9 6 76.3 23.4 3.27 1.9 5
070 99.7 14.4 6.93 4.8 38 95.1 16.5 5.77 4.6 33 90.8 19.6 4.63 4.4 29 87.0 21.9 3.98 2.1 7 82.3 25.4 3.24 2.0 6
080 111.2 16.9 6.58 5.3 42 107.4 19.4 5.53 5.1 38 102.7 22.8 4.50 4.9 33 97.9 25.3 3.88 2.4 8 91.8 29.1 3.15 2.2 7
090 131.8 19.7 6.70 6.3 46 125.3 22.4 5.60 6.0 40 117.9 25.9 4.55 5.7 34 111.9 28.5 3.93 2.7 8 105.1 32.8 3.20 2.5 7
Legend:
LWT °C Evaporator leaving water temperature Application data:
CAP kW Heating capacity Standard units, refrigerant: R410A
COP kW/kW Coefficient of performance Evaporator temperature rise: 3 K
UNIT kW Unit power input (compressors and control circuit) Condenser temperature rise: 5 K up to 45°C LWT, above 10 K
Flow l/s Condenser water flow rate Evaporator fluid: water
DP kPa Condenser pressure drop Fouling factor: 0.18 x 10-4 (m2 K)/W
Performances in accordance with EN 14511
24
Cooling capacities, 61WG - standard units
5 7 10 18
61WG EWT CAP UNIT EER Flow DP CAP UNIT EER Flow DP CAP UNIT EER Flow DP CAP UNIT EER Flow DP
kW/ kW/ kW/ kW/
°C kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
kW kW kW kW
020 30 22.3 5.2 4.33 1.1 11 23.9 5.2 4.57 1.1 12 26.3 5.3 4.94 1.3 14 33.0 5.6 5.90 1.6 20
025 26.4 6.3 4.22 1.3 12 28.2 6.4 4.43 1.4 14 31.1 6.5 4.76 1.5 16 39.1 7.0 5.61 1.9 23
030 28.5 7.0 4.05 1.4 14 31.2 7.2 4.35 1.5 16 34.5 7.4 4.69 1.7 19 43.3 7.8 5.56 2.1 28
035 34.1 8.1 4.23 1.6 16 36.2 8.2 4.44 1.7 17 39.6 8.3 4.76 1.9 20 49.5 8.7 5.66 2.4 29
040 38.8 9.0 4.30 1.9 17 41.2 9.1 4.50 2.0 19 45.0 9.3 4.81 2.2 22 56.3 9.9 5.66 2.7 32
045 43.6 10.3 4.25 2.1 18 46.8 10.5 4.47 2.2 20 51.9 10.8 4.80 2.5 24 65.2 11.6 5.62 3.1 35
050 53.2 12.1 4.39 2.5 10 56.6 12.3 4.60 2.7 11 62.0 12.5 4.94 3.0 13 78.5 13.4 5.88 3.8 19
060 60.4 14.2 4.26 2.9 11 64.1 14.3 4.47 3.1 12 70.1 14.6 4.80 3.4 14 88.2 15.5 5.70 4.2 21
070 68.3 15.7 4.34 3.3 13 72.8 15.9 4.57 3.5 14 79.6 16.1 4.95 3.8 16 100.5 16.7 6.02 4.8 24
080 76.9 18.2 4.23 3.7 11 81.9 18.5 4.42 3.9 13 89.3 18.8 4.74 4.3 16 111.5 19.8 5.64 5.4 27
090 89.6 21.0 4.27 4.3 13 95.5 21.3 4.48 4.6 15 104.4 21.7 4.81 5.0 18 131.6 22.8 5.79 6.3 31
020 35 21.4 5.8 3.70 1.0 10 22.7 5.7 3.96 1.1 11 25.0 5.8 4.30 1.2 13 31.2 6.1 5.14 1.5 18
025 25.5 6.9 3.72 1.2 11 26.9 6.9 3.88 1.3 13 29.6 7.1 4.17 1.4 15 37.0 7.5 4.93 1.8 21
030 28.8 7.8 3.70 1.4 14 29.7 7.9 3.78 1.4 15 32.9 8.0 4.10 1.6 18 41.0 8.4 4.86 2.0 26
035 32.9 9.0 3.66 1.6 15 34.7 9.0 3.87 1.7 16 37.9 9.1 4.16 1.8 18 47.0 9.5 4.95 2.3 26
040 36.7 10.0 3.66 1.8 16 39.5 10.1 3.93 1.9 18 43.1 10.2 4.21 2.1 21 53.5 10.8 4.96 2.6 29
045 40.7 11.3 3.61 1.9 16 44.7 11.3 3.94 2.1 19 49.4 11.6 4.24 2.4 22 61.8 12.4 4.97 3.0 32
050 50.5 13.6 3.72 2.4 9 54.4 13.5 4.05 2.6 10 59.5 13.7 4.35 2.8 12 74.1 14.4 5.16 3.6 17
060 56.4 15.5 3.64 2.7 10 61.4 15.8 3.90 2.9 11 67.2 15.9 4.21 3.2 13 84.0 16.5 5.09 4.0 19
070 65.0 18.0 3.61 3.1 12 69.2 17.5 3.96 3.3 13 76.1 17.7 4.30 3.6 15 95.9 18.0 5.32 4.6 22
080 72.6 20.2 3.59 3.5 10 77.8 20.2 3.86 3.7 11 85.5 20.6 4.15 4.1 14 106.8 21.3 5.01 5.1 24
090 84.3 23.2 3.63 4.0 11 90.1 23.0 3.91 4.3 13 99.3 23.5 4.22 4.8 16 125.2 24.3 5.15 6.0 28
020 40 20.2 6.2 3.25 1.0 9 21.6 6.3 3.43 1.0 10 23.7 6.4 3.72 1.1 11 29.4 6.6 4.46 1.4 16
025 24.2 7.4 3.28 1.2 10 25.7 7.5 3.43 1.2 12 28.1 7.7 3.67 1.3 13 34.8 8.1 4.30 1.7 19
030 25.8 8.5 3.04 1.2 12 28.2 8.6 3.27 1.3 14 31.2 8.8 3.56 1.5 16 38.7 9.1 4.24 1.9 23
035 31.1 9.7 3.19 1.5 13 33.0 9.8 3.36 1.6 15 36.1 10.0 3.62 1.7 17 44.6 10.3 4.31 2.1 24
040 35.7 11.0 3.25 1.7 15 37.8 11.1 3.41 1.8 16 41.1 11.3 3.65 2.0 19 50.7 11.8 4.31 2.4 27
045 39.7 12.1 3.27 1.9 15 42.5 12.3 3.45 2.0 17 46.9 12.6 3.72 2.3 20 58.3 13.3 4.38 2.8 29
050 48.9 14.4 3.41 2.3 8 52.1 14.6 3.58 2.5 9 56.9 14.8 3.84 2.7 11 70.0 15.5 4.52 3.4 15
060 55.2 17.3 3.20 2.6 9 58.7 17.3 3.38 2.8 10 64.3 17.4 3.69 3.1 12 80.0 17.7 4.52 3.8 17
070 61.1 19.0 3.22 2.9 10 65.4 19.1 3.42 3.1 12 72.2 19.3 3.74 3.5 14 91.5 19.6 4.67 4.4 21
080 68.9 21.7 3.17 3.3 8 73.6 22.0 3.35 3.5 10 81.1 22.4 3.63 3.9 12 102.5 23.2 4.41 4.9 22
090 78.9 24.7 3.20 3.8 9 84.5 24.9 3.39 4.0 11 93.4 25.4 3.68 4.5 14 119.1 26.2 4.54 5.7 24
020 50 18.2 7.6 2.40 0.9 7 19.3 7.6 2.54 0.9 8 21.2 7.7 2.76 1.0 9 25.7 7.8 3.30 1.2 13
025 21.8 8.9 2.46 1.0 9 23.1 8.9 2.58 1.1 9 25.1 9.0 2.77 1.2 11 30.2 9.3 3.26 1.5 15
030 22.7 10.3 2.21 1.1 9 25.0 10.4 2.40 1.2 11 27.8 10.5 2.64 1.3 13 34.1 10.8 3.16 1.6 18
035 27.7 11.8 2.35 1.3 11 29.5 11.9 2.48 1.4 12 32.2 12.0 2.68 1.5 14 39.5 12.3 3.21 1.9 19
040 30.5 13.3 2.28 1.5 11 32.7 13.5 2.43 1.6 13 36.3 13.7 2.65 1.7 15 44.5 14.0 3.17 2.1 21
045 34.3 14.5 2.37 1.6 12 37.2 14.7 2.54 1.8 13 41.8 15.0 2.79 2.0 16 51.5 15.6 3.30 2.5 23
050 43.6 17.3 2.52 2.1 7 46.3 17.4 2.66 2.2 7 50.7 17.5 2.89 2.4 9 62.2 17.9 3.48 3.0 12
060 49.3 20.8 2.38 2.4 8 53.0 20.9 2.53 2.5 9 58.3 20.9 2.80 2.8 10 72.6 20.5 3.54 3.5 15
070 53.3 22.8 2.34 2.5 8 57.4 22.8 2.52 2.7 9 63.9 22.8 2.80 3.1 11 82.2 22.8 3.60 3.9 17
080 59.5 26.0 2.29 2.8 6 64.0 26.1 2.45 3.1 7 71.1 26.3 2.71 3.4 9 91.4 26.9 3.40 4.4 16
090 68.1 29.2 2.33 3.3 6 73.3 29.4 2.50 3.5 8 81.7 29.5 2.76 3.9 10 105.5 30.2 3.50 5.1 18
Legend: Application data:

EWT °C Condenser entering water temperature Standard units, refrigerant: R410A
CAP kW Cooling capacity Evaporator water temperature rise: 5 K
EER kW/kW Energy efficiency ratio Condenser water temperature rise: 5 K
UNIT kW Unit power input (compressors and control circuit) Evaporator fluid: chilled water
Flow l/s Evaporator water flow rate Fouling factor: 0.18 x 10-4 (m2 K)/W
DP kPa Evaporator pressure drop Performances in accordance with EN 14511
25
Heating capacities, 61WG with option 272 (brine evaporator-side)
25 35 45 55 65
kW/ kW/ kW/ kW/ kW/
kW kW kW kW kW
020 -5 20.5 4.1 4.99 1.0 8 20.2 5.0 4.03 1.0 8 19.5 6.1 3.21 0.9 7 19.1 7.0 2.72 0.5 5 18.3 8.5 2.14 0.4 5
025 24.0 4.9 4.90 1.1 9 24.3 6.0 4.08 1.2 9 23.6 7.0 3.36 1.1 8 23.1 8.1 2.86 0.6 5 22.3 9.9 2.24 0.5 5
030 28.3 5.6 5.05 1.4 13 27.7 6.8 4.09 1.3 12 26.9 8.2 3.29 1.3 11 26.2 9.4 2.79 0.6 5 24.8 11.3 2.20 0.6 5
035 32.8 6.6 5.00 1.6 13 32.2 7.9 4.09 1.5 12 31.4 9.5 3.30 1.5 11 30.4 10.9 2.80 0.7 5 28.9 13.0 2.21 0.7 5
040 36.6 7.2 5.07 1.7 14 35.6 8.7 4.08 1.7 13 34.7 10.7 3.26 1.7 12 33.9 12.4 2.74 0.8 5 31.7 14.5 2.19 0.8 5
045 40.3 8.2 4.94 1.9 15 38.9 9.7 4.03 1.9 13 37.6 11.5 3.27 1.8 12 36.5 13.1 2.79 0.9 5 35.1 15.7 2.23 0.9 5
050 47.0 9.6 4.91 2.2 11 47.0 11.7 4.02 2.3 10 46.7 14.0 3.33 2.2 10 46.1 16.4 2.81 1.1 5 44.1 20.2 2.19 1.1 5
060 54.7 10.6 5.18 2.6 13 52.7 12.9 4.07 2.5 11 51.1 16.0 3.20 2.5 10 50.2 18.6 2.70 1.2 5 48.3 22.4 2.16 1.2 5
070 65.9 12.6 5.21 3.1 17 63.1 15.5 4.07 3.0 15 60.8 19.2 3.17 2.9 13 59.3 22.4 2.65 1.4 5 56.6 26.8 2.11 1.4 5
080 72.4 14.0 5.17 3.5 18 70.2 17.1 4.10 3.4 17 68.0 21.0 3.23 3.3 15 66.4 24.6 2.70 1.6 5 63.2 28.7 2.20 1.5 5
090 86.3 16.4 5.26 4.1 21 81.8 19.9 4.12 3.9 18 77.8 24.2 3.21 3.7 16 75.6 28.2 2.68 1.8 5 73.4 34.3 2.14 1.8 5
020 -4 21.2 4.2 5.11 1.0 9 21.0 5.1 4.13 1.0 8 20.2 6.1 3.29 1.0 7 19.7 7.0 2.79 0.5 5 18.9 8.6 2.20 0.5 5
025 24.9 5.0 5.01 1.2 10 25.0 6.0 4.16 1.2 10 24.4 7.1 3.45 1.2 9 23.8 8.1 2.93 0.6 5 22.9 10.0 2.30 0.6 5
030 29.2 5.7 5.15 1.4 13 28.5 6.8 4.17 1.4 12 27.7 8.2 3.36 1.3 11 27.0 9.4 2.86 0.7 5 25.5 11.3 2.25 0.6 5
035 33.8 6.6 5.10 1.6 14 33.1 7.9 4.17 1.6 13 32.3 9.6 3.37 1.6 12 31.3 10.9 2.86 0.8 5 29.7 13.1 2.26 0.7 5
040 37.7 7.3 5.17 1.8 15 36.6 8.8 4.17 1.8 14 35.6 10.7 3.32 1.7 13 34.9 12.4 2.80 0.8 5 32.5 14.5 2.24 0.8 5
045 42.0 8.3 5.06 2.0 16 40.4 9.8 4.13 1.9 14 38.9 11.6 3.36 1.9 13 38.0 13.2 2.88 0.9 5 36.3 15.8 2.29 0.9 5
050 48.8 9.7 5.03 2.3 11 48.6 11.8 4.13 2.3 11 48.1 14.1 3.41 2.3 10 47.6 16.5 2.89 1.2 5 45.5 20.2 2.25 1.1 5
060 56.7 10.7 5.28 2.7 14 54.5 13.1 4.16 2.6 12 52.7 16.1 3.28 2.5 11 51.7 18.7 2.77 1.2 5 49.9 22.5 2.22 1.2 5
070 67.8 12.8 5.31 3.2 18 65.0 15.6 4.16 3.1 16 62.5 19.3 3.24 3.0 14 60.8 22.4 2.71 1.5 5 58.3 26.9 2.17 1.4 5
080 74.5 14.2 5.25 3.6 19 72.2 17.3 4.18 3.5 18 69.8 21.2 3.30 3.4 16 68.0 24.6 2.76 1.6 5 65.0 28.8 2.25 1.6 5
090 88.9 16.7 5.34 4.2 22 84.2 20.1 4.20 4.0 19 79.9 24.3 3.28 3.8 16 77.5 28.2 2.75 1.9 5 75.4 34.4 2.19 1.8 5
020 -3 22.0 4.2 5.23 1.1 9 21.6 5.1 4.22 1.0 9 20.9 6.2 3.38 1.0 8 20.3 7.1 2.86 0.5 5 19.5 8.6 2.27 0.5 5
025 25.9 5.0 5.12 1.2 11 25.7 6.0 4.25 1.2 10 25.2 7.1 3.53 1.2 9 24.5 8.2 3.00 0.6 5 23.6 10.0 2.35 0.6 5
030 30.1 5.7 5.25 1.4 14 29.3 6.9 4.26 1.4 13 28.6 8.3 3.44 1.4 12 27.7 9.5 2.92 0.7 5 26.2 11.4 2.30 0.6 5
035 34.8 6.7 5.21 1.7 15 34.0 8.0 4.25 1.6 14 33.2 9.6 3.44 1.6 13 32.2 11.0 2.93 0.8 5 30.5 13.2 2.32 0.7 5
040 38.8 7.4 5.27 1.9 16 37.6 8.9 4.25 1.8 14 36.5 10.8 3.39 1.8 13 35.8 12.5 2.87 0.9 5 33.3 14.6 2.29 0.8 5
045 43.7 8.5 5.17 2.1 17 42.0 9.9 4.23 2.0 15 40.2 11.7 3.44 1.9 13 39.4 13.3 2.96 1.0 5 37.5 15.9 2.35 0.9 5
050 50.7 9.8 5.15 2.4 12 50.3 11.9 4.24 2.4 12 49.5 14.2 3.49 2.4 11 49.2 16.6 2.97 1.2 5 46.8 20.3 2.30 1.1 5
060 58.7 10.9 5.38 2.8 14 56.4 13.3 4.25 2.7 13 54.4 16.2 3.36 2.6 11 53.2 18.7 2.84 1.3 5 51.5 22.6 2.28 1.2 5
070 69.8 12.9 5.41 3.3 19 66.9 15.8 4.24 3.2 17 64.1 19.3 3.32 3.1 15 62.4 22.4 2.78 1.5 5 60.1 27.0 2.23 1.5 5
080 76.8 14.4 5.33 3.7 21 74.3 17.5 4.26 3.6 18 71.7 21.3 3.37 3.4 17 69.7 24.7 2.82 1.7 5 66.4 28.8 2.31 1.6 5
090 91.6 16.9 5.42 4.4 23 86.7 20.3 4.27 4.2 20 82.0 24.4 3.36 3.9 17 79.4 28.2 2.81 1.9 5 76.9 34.3 2.25 1.9 5
020 -2 22.8 4.3 5.34 1.1 10 22.2 5.2 4.31 1.1 9 21.5 6.2 3.46 1.0 8 20.9 7.1 2.94 0.5 5 20.0 8.6 2.32 0.5 5
025 26.8 5.1 5.23 1.3 12 26.4 6.1 4.33 1.3 11 26.0 7.2 3.61 1.2 10 25.2 8.2 3.07 0.6 5 24.2 10.1 2.40 0.6 5
030 31.1 5.8 5.34 1.5 15 30.2 6.9 4.35 1.4 14 29.4 8.4 3.52 1.4 13 28.5 9.5 2.99 0.7 5 27.0 11.4 2.36 0.7 5
035 35.8 6.7 5.31 1.7 16 34.9 8.1 4.33 1.7 14 34.1 9.7 3.52 1.6 13 33.1 11.1 2.99 0.8 5 31.4 13.2 2.37 0.8 5
040 39.9 7.4 5.37 1.9 17 38.7 8.9 4.34 1.9 15 37.4 10.8 3.46 1.8 14 36.6 12.5 2.92 0.9 5 34.2 14.6 2.34 0.8 5
045 45.1 8.6 5.27 2.2 18 43.3 10.0 4.31 2.1 16 41.5 11.8 3.51 2.0 14 40.6 13.4 3.03 1.0 5 38.7 16.0 2.42 0.9 5
050 52.6 10.0 5.27 2.5 13 52.0 12.0 4.35 2.5 12 51.0 14.3 3.58 2.5 12 50.4 16.6 3.03 1.2 5 48.2 20.4 2.36 1.2 5
060 60.8 11.1 5.47 2.9 15 58.3 13.4 4.34 2.8 14 56.1 16.3 3.44 2.7 12 54.7 18.8 2.91 1.3 5 53.1 22.7 2.34 1.3 5
070 71.9 13.1 5.50 3.4 20 68.8 15.9 4.33 3.3 18 65.8 19.4 3.39 3.2 16 63.9 22.5 2.85 1.5 5 61.9 27.1 2.28 1.5 5
080 79.1 14.6 5.41 3.8 22 76.4 17.6 4.33 3.7 20 73.6 21.4 3.44 3.5 17 71.4 24.7 2.89 1.7 5 67.9 28.8 2.36 1.6 5
090 94.4 17.2 5.50 4.5 24 89.3 20.5 4.35 4.3 21 84.3 24.6 3.43 4.1 18 81.3 28.3 2.88 2.0 5 78.6 34.1 2.30 1.9 5
020 0 24.4 4.4 5.56 1.2 11 23.5 5.2 4.49 1.1 10 23.0 6.3 3.64 1.1 9 22.2 7.2 3.09 0.5 5 21.1 8.7 2.44 0.5 5
025 28.7 5.3 5.43 1.4 13 27.9 6.2 4.50 1.3 12 27.5 7.3 3.77 1.3 11 26.6 8.3 3.20 0.6 5 25.4 10.1 2.51 0.6 5
030 33.0 6.0 5.52 1.6 17 32.0 7.1 4.52 1.5 15 31.1 8.5 3.66 1.5 14 30.1 9.7 3.12 0.7 5 28.6 11.6 2.47 0.7 5
035 37.8 6.9 5.49 1.8 17 36.8 8.2 4.50 1.8 16 35.9 9.8 3.65 1.7 14 34.9 11.2 3.12 0.8 5 33.1 13.4 2.48 0.8 5
040 42.3 7.6 5.57 2.0 19 40.9 9.1 4.51 2.0 17 39.3 10.9 3.60 1.9 15 38.2 12.6 3.04 0.9 5 36.0 14.7 2.45 0.9 5
045 47.8 8.8 5.44 2.3 20 45.8 10.3 4.46 2.2 18 43.7 12.0 3.64 2.1 16 42.6 13.6 3.14 1.0 5 41.1 16.2 2.53 1.0 5
050 56.3 10.3 5.48 2.7 15 55.1 12.1 4.54 2.6 14 53.8 14.4 3.73 2.6 13 52.9 16.7 3.16 1.3 5 51.1 20.6 2.49 1.2 5
060 65.0 11.5 5.67 3.1 18 62.3 13.8 4.53 3.0 16 59.7 16.5 3.61 2.9 14 58.0 18.9 3.07 1.4 5 55.9 22.7 2.47 1.4 5
070 76.0 13.3 5.70 3.6 22 72.7 16.2 4.50 3.5 20 69.3 19.6 3.55 3.3 17 67.1 22.5 2.98 1.6 5 64.7 26.9 2.40 1.6 5
080 83.8 15.1 5.57 4.0 24 80.9 18.0 4.49 3.9 22 77.6 21.6 3.58 3.7 19 75.0 24.8 3.02 1.8 5 71.1 28.8 2.47 1.7 5
090 100.0 17.7 5.66 4.8 27 94.6 20.9 4.52 4.5 23 88.9 24.8 3.58 4.3 20 85.5 28.4 3.01 2.1 5 82.0 34.0 2.42 2.0 5
Legend:
Flow l/s Condenser water flow rate Evaporator fluid: ethylene glycol at 20%
26
Cooling capacities, 30WG - standard units
5 7 10 18
30WG EWT CAP UNIT EER Flow DP CAP UNIT EER Flow DP CAP UNIT EER Flow DP CAP UNIT EER Flow DP
kW/ kW/ kW/ kW/
°C kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa kW kW l/s kPa
kW kW kW kW
020 30 22.9 5.2 4.42 1.1 11 24.5 5.2 4.69 1.2 12 27.0 5.3 5.12 1.3 15 33.8 5.3 6.38 1.6 21
025 26.8 6.0 4.44 1.3 13 28.5 6.1 4.69 1.4 14 31.3 6.2 5.07 1.5 16 39.2 6.5 6.07 1.9 24
030 28.8 6.6 4.34 1.4 14 31.3 6.7 4.65 1.5 17 34.4 6.8 5.03 1.7 19 42.9 7.2 5.99 2.1 28
035 34.4 7.7 4.46 1.6 16 36.5 7.8 4.69 1.7 17 39.9 7.9 5.05 1.9 20 50.0 8.3 6.01 2.4 29
040 39.3 8.8 4.45 1.9 18 41.6 8.9 4.66 2.0 20 45.4 9.1 4.98 2.2 23 56.5 9.6 5.86 2.7 32
045 43.0 9.8 4.40 2.1 18 46.3 9.9 4.67 2.2 21 51.5 10.1 5.08 2.5 25 65.3 10.9 6.01 3.1 37
050 54.5 12.3 4.45 2.6 10 57.9 12.3 4.69 2.8 11 63.2 12.5 5.07 3.0 13 78.5 12.9 6.09 3.8 19
060 59.6 13.6 4.39 2.8 11 63.1 13.7 4.62 3.0 12 68.8 13.8 4.98 3.3 14 85.9 14.5 5.93 4.1 20
070 68.9 15.6 4.40 3.3 13 73.4 15.8 4.65 3.5 14 80.3 15.9 5.05 3.8 17 101.5 16.5 6.16 4.9 25
080 78.5 17.8 4.41 3.7 12 83.5 18.1 4.62 4.0 14 90.9 18.4 4.95 4.4 17 112.9 19.1 5.90 5.4 28
090 88.2 20.0 4.41 4.2 12 94.1 20.2 4.65 4.5 14 102.7 20.4 5.04 4.9 17 129.2 21.2 6.11 6.2 30
020 35 21.9 5.8 3.78 1.0 10 23.4 5.8 4.01 1.1 11 25.7 5.9 4.39 1.2 13 32.1 5.8 5.52 1.5 19
025 25.5 6.7 3.81 1.2 12 27.1 6.7 4.02 1.3 13 29.8 6.8 4.36 1.4 15 37.1 7.1 5.24 1.8 21
030 27.4 7.3 3.73 1.3 13 29.8 7.4 4.02 1.4 15 32.8 7.5 4.36 1.6 18 40.7 7.8 5.20 2.0 25
035 32.8 8.6 3.83 1.6 15 34.9 8.6 4.04 1.7 16 38.1 8.7 4.37 1.8 19 47.4 9.1 5.23 2.3 27
040 37.8 9.8 3.86 1.8 17 40.0 9.9 4.04 1.9 18 43.5 10.0 4.33 2.1 21 53.7 10.5 5.12 2.6 29
045 40.8 10.8 3.77 1.9 17 44.0 10.9 4.02 2.1 19 48.9 11.1 4.39 2.3 22 61.8 11.8 5.26 3.0 33
050 52.4 13.7 3.82 2.5 9 55.6 13.8 4.04 2.7 10 60.7 13.9 4.37 2.9 12 75.1 14.2 5.27 3.6 17
060 57.0 15.1 3.77 2.7 10 60.5 15.2 3.98 2.9 11 65.9 15.3 4.32 3.2 13 81.8 15.6 5.25 3.9 18
070 65.2 17.4 3.74 3.1 12 69.6 17.5 3.98 3.3 13 76.6 17.6 4.35 3.7 15 96.6 17.8 5.43 4.6 23
080 74.6 19.5 3.82 3.6 10 79.5 19.8 4.02 3.8 12 87.1 20.2 4.32 4.2 15 108.2 20.6 5.24 5.2 25
090 83.4 22.2 3.76 4.0 11 89.0 22.3 3.98 4.3 12 98.1 22.6 4.33 4.7 16 123.0 22.8 5.39 5.9 26
020 40 20.8 6.5 3.22 1.0 9 22.2 6.5 3.42 1.1 10 24.5 6.5 3.75 1.2 12 30.4 6.4 4.75 1.5 17
025 24.4 7.5 3.27 1.2 11 25.9 7.5 3.45 1.2 12 28.3 7.6 3.74 1.4 13 35.1 7.8 4.50 1.7 19
030 26.0 8.1 3.19 1.2 12 28.3 8.2 3.44 1.4 14 31.2 8.3 3.75 1.5 16 38.4 8.5 4.50 1.9 23
035 31.2 9.6 3.27 1.5 13 33.1 9.6 3.45 1.6 15 36.2 9.7 3.74 1.7 17 44.8 9.9 4.52 2.2 24
040 36.3 10.9 3.33 1.7 15 38.3 11.0 3.50 1.8 17 41.6 11.1 3.76 2.0 19 50.9 11.4 4.46 2.5 27
045 38.5 12.0 3.21 1.8 15 41.5 12.1 3.43 2.0 17 46.2 12.3 3.76 2.2 20 58.1 12.8 4.55 2.8 30
050 49.6 15.2 3.26 2.4 9 53.0 15.3 3.46 2.5 10 58.2 15.5 3.76 2.8 11 71.7 15.7 4.56 3.4 16
060 54.4 16.9 3.23 2.6 9 57.7 16.9 3.42 2.8 10 63.0 16.8 3.74 3.0 12 77.9 16.8 4.63 3.7 16
070 61.3 19.4 3.16 2.9 10 65.6 19.4 3.38 3.1 12 72.5 19.4 3.73 3.5 14 92.0 19.4 4.73 4.4 21
080 70.6 21.4 3.29 3.4 9 75.3 21.6 3.48 3.6 10 82.8 21.9 3.78 4.0 13 103.9 22.5 4.62 5.0 23
090 78.3 24.6 3.19 3.7 9 83.9 24.7 3.40 4.0 11 92.7 24.8 3.73 4.4 13 117.7 25.1 4.69 5.7 24
020 50 18.6 8.1 2.31 0.9 8 19.9 8.1 2.46 1.0 9 21.9 8.1 2.71 1.1 10 27.0 7.8 3.46 1.3 14
025 22.1 9.2 2.39 1.1 9 23.4 9.2 2.53 1.1 10 25.4 9.3 2.74 1.2 11 30.9 9.4 3.28 1.5 15
030 22.8 10.0 2.28 1.1 9 25.0 10.1 2.49 1.2 11 27.7 10.1 2.74 1.3 13 33.8 10.2 3.30 1.6 18
035 27.7 11.9 2.33 1.3 11 29.4 11.9 2.48 1.4 12 32.1 11.9 2.70 1.5 14 39.3 12.0 3.29 1.9 19
040 31.6 13.2 2.40 1.5 12 33.9 13.3 2.55 1.6 13 37.5 13.4 2.79 1.8 16 45.6 13.6 3.34 2.2 22
045 35.0 14.9 2.35 1.7 13 37.3 14.9 2.50 1.8 14 40.4 14.9 2.71 1.9 16 50.5 15.2 3.33 2.4 23
050 43.4 18.6 2.33 2.1 7 46.6 18.7 2.49 2.2 7 51.6 18.8 2.74 2.5 9 64.9 19.2 3.39 3.1 13
060 48.6 20.7 2.35 2.3 7 52.0 20.7 2.51 2.5 8 57.1 20.5 2.79 2.7 10 70.5 19.8 3.55 3.4 14
070 53.3 23.8 2.23 2.5 8 57.3 23.7 2.42 2.7 9 63.7 23.5 2.72 3.1 11 82.0 23.0 3.57 3.9 17
080 62.3 25.6 2.44 3.0 6 66.8 25.6 2.61 3.2 8 73.9 25.7 2.87 3.5 10 93.9 26.0 3.61 4.5 18
090 67.9 29.9 2.27 3.2 6 73.1 29.8 2.45 3.5 8 81.5 29.7 2.74 3.9 10 105.2 29.6 3.55 5.1 18
Legend: Application data:

EWT °C Condenser entering water temperature Standard units, refrigerant: R410A
CAP kW Cooling capacity Evaporator water temperature rise: 5 K
EER kW/kW Energy efficiency ratio Condenser water temperature rise: 5 K
UNIT kW Unit power input (compressors and control circuit) Evaporator fluid: chilled water
Flow l/s Evaporator water flow rate Fouling factor: 0.18 x 10-4 (m2 K)/W
DP kPa Evaporator pressure drop Performances in accordance with EN 14511
27
Heating capacities, 30WG - standard units
25 35 45 55 65
kW/ kW/ kW/ kW/ kW/
kW kW kW kW kW
020 5 29.0 4.5 6.51 1.4 16 27.9 5.3 5.25 1.3 14 27.1 6.6 4.12 1.3 13 26.6 7.6 3.50 0.6 5 25.7 9.3 2.77 0.6 5
025 34.1 5.2 6.52 1.6 18 32.6 6.2 5.27 1.6 16 31.6 7.6 4.17 1.5 14 31.1 8.8 3.55 0.8 5 29.9 10.6 2.83 0.7 5
030 36.6 5.8 6.34 1.7 20 35.2 6.8 5.17 1.7 18 33.9 8.3 4.10 1.6 16 33.0 9.5 3.47 0.8 5 31.4 11.5 2.74 0.8 5
035 43.5 6.7 6.45 2.1 22 41.8 7.9 5.28 2.0 20 40.5 9.7 4.16 1.9 18 39.5 11.2 3.52 1.0 5 37.7 13.6 2.77 0.9 5
040 49.5 7.7 6.46 2.4 25 47.8 9.1 5.27 2.3 22 46.8 11.1 4.22 2.3 21 45.1 12.6 3.58 1.1 5 42.4 14.9 2.84 1.0 5
045 54.9 8.5 6.45 2.6 26 52.4 10.0 5.22 2.5 23 50.2 12.2 4.11 2.4 20 49.7 14.1 3.52 1.2 6 47.3 17.0 2.77 1.1 5
050 68.4 10.3 6.62 3.3 22 66.4 12.5 5.32 3.2 20 64.3 15.4 4.18 3.1 18 62.0 17.9 3.46 1.5 5 59.3 21.4 2.77 1.4 5
060 75.6 11.6 6.50 3.6 24 72.7 13.8 5.27 3.5 21 70.9 17.1 4.15 3.4 19 69.3 19.7 3.51 1.7 5 65.9 23.1 2.86 1.6 5
070 87.4 13.3 6.56 4.2 29 83.9 15.9 5.27 4.0 26 80.2 19.6 4.08 3.9 23 77.3 22.6 3.41 1.9 5 73.5 27.1 2.71 1.8 5
080 98.6 15.2 6.49 4.7 33 95.7 18.2 5.25 4.6 30 91.4 21.8 4.20 4.4 27 88.1 24.5 3.59 2.1 6 83.9 28.7 2.93 2.0 6
090 111.4 16.9 6.57 5.3 33 107.5 20.5 5.25 5.2 30 102.2 24.9 4.10 4.9 26 98.1 28.5 3.44 2.4 6 91.3 33.9 2.69 2.2 5
020 6 29.9 4.5 6.64 1.4 17 28.7 5.3 5.37 1.4 15 27.8 6.6 4.22 1.3 13 27.3 7.6 3.58 0.7 5 26.4 9.3 2.84 0.6 5
025 35.1 5.3 6.64 1.7 19 33.5 6.2 5.38 1.6 17 32.4 7.6 4.26 1.6 15 31.8 8.8 3.62 0.8 5 30.7 10.6 2.90 0.7 5
030 38.0 5.9 6.48 1.8 22 36.5 6.9 5.31 1.7 19 35.1 8.3 4.21 1.7 17 34.1 9.5 3.58 0.8 5 32.4 11.5 2.82 0.8 5
035 44.7 6.8 6.55 2.1 23 42.9 8.0 5.38 2.1 21 41.5 9.8 4.25 2.0 19 40.4 11.2 3.59 1.0 5 38.6 13.6 2.83 0.9 5
040 50.8 7.8 6.55 2.4 26 49.0 9.1 5.36 2.3 23 47.9 11.1 4.30 2.3 22 46.2 12.6 3.66 1.1 6 43.5 15.0 2.90 1.1 5
045 56.8 8.6 6.57 2.7 28 54.1 10.1 5.35 2.6 24 51.7 12.3 4.21 2.5 22 50.7 14.1 3.59 1.2 6 48.5 17.1 2.84 1.2 5
050 70.3 10.4 6.73 3.4 23 68.0 12.5 5.43 3.3 21 66.1 15.5 4.27 3.2 19 63.6 17.9 3.54 1.5 5 60.7 21.5 2.83 1.5 5
060 77.7 11.8 6.59 3.7 25 74.5 13.9 5.37 3.6 22 72.5 17.1 4.24 3.5 20 71.1 19.8 3.60 1.7 5 67.7 23.1 2.93 1.6 5
070 89.9 13.5 6.66 4.3 31 86.2 16.0 5.38 4.1 27 82.3 19.6 4.19 4.0 24 79.2 22.6 3.51 1.9 6 75.3 27.0 2.79 1.8 5
080 101.2 15.4 6.57 4.8 35 98.2 18.4 5.34 4.7 32 93.8 21.9 4.29 4.5 28 90.3 24.6 3.68 2.2 7 86.0 28.6 3.00 2.1 6
090 114.6 17.2 6.66 5.5 35 110.5 20.6 5.36 5.3 31 104.9 25.0 4.20 5.0 27 100.7 28.5 3.53 2.4 7 93.3 33.8 2.76 2.3 6
020 7 30.9 4.6 6.76 1.5 18 29.5 5.4 5.50 1.4 15 28.5 6.6 4.31 1.4 14 27.9 7.6 3.66 0.7 5 27.0 9.3 2.91 0.7 5
025 36.2 5.4 6.75 1.7 20 34.4 6.3 5.50 1.6 17 33.2 7.6 4.34 1.6 16 32.5 8.8 3.70 0.8 5 31.4 10.6 2.96 0.8 5
030 39.5 6.0 6.62 1.9 23 37.7 6.9 5.45 1.8 21 36.2 8.4 4.32 1.7 18 35.1 9.6 3.67 0.8 5 33.4 11.5 2.90 0.8 5
035 46.0 6.9 6.65 2.2 25 44.0 8.0 5.49 2.1 22 42.4 9.8 4.34 2.0 20 41.3 11.2 3.67 1.0 5 39.5 13.7 2.89 1.0 5
040 52.2 7.9 6.64 2.5 27 50.3 9.2 5.45 2.4 24 49.0 11.2 4.38 2.4 22 47.4 12.7 3.74 1.1 6 44.6 15.0 2.97 1.1 5
045 58.8 8.8 6.69 2.8 30 55.8 10.2 5.47 2.7 26 53.2 12.3 4.31 2.6 23 51.8 14.1 3.67 1.3 6 49.9 17.1 2.91 1.2 5
050 72.2 10.5 6.85 3.4 24 69.8 12.6 5.55 3.3 22 67.8 15.5 4.37 3.3 20 65.2 18.0 3.63 1.6 5 62.2 21.5 2.89 1.5 5
060 79.9 11.9 6.69 3.8 26 76.3 13.9 5.48 3.7 23 74.1 17.1 4.34 3.6 21 72.7 19.7 3.68 1.8 5 69.6 23.2 3.00 1.7 5
070 92.5 13.7 6.76 4.4 33 88.6 16.1 5.50 4.2 29 84.4 19.7 4.29 4.1 25 81.2 22.5 3.60 2.0 6 77.2 26.9 2.87 1.9 5
080 103.9 15.6 6.65 5.0 37 100.9 18.6 5.43 4.8 33 96.3 22.0 4.37 4.6 29 92.6 24.6 3.76 2.2 7 88.1 28.6 3.08 2.1 6
090 117.9 17.5 6.75 5.6 37 113.5 20.8 5.47 5.4 33 107.7 25.1 4.30 5.2 29 103.3 28.5 3.63 2.5 7 95.4 33.7 2.83 2.3 6
020 8 31.8 4.6 6.88 1.5 19 30.3 5.4 5.62 1.5 16 29.3 6.6 4.41 1.4 15 28.6 7.6 3.75 0.7 5 27.7 9.3 2.98 0.7 5
025 37.2 5.4 6.87 1.8 21 35.3 6.3 5.61 1.7 18 33.9 7.7 4.43 1.6 16 33.2 8.8 3.77 0.8 5 32.2 10.6 3.02 0.8 5
030 40.9 6.1 6.75 2.0 25 39.0 7.0 5.58 1.9 22 37.3 8.4 4.43 1.8 19 36.1 9.6 3.77 0.9 5 34.4 11.5 2.98 0.8 5
035 47.3 7.0 6.75 2.3 26 45.2 8.1 5.60 2.2 23 43.5 9.8 4.42 2.1 20 42.2 11.3 3.74 1.0 5 40.4 13.7 2.96 1.0 5
040 53.7 8.0 6.73 2.6 29 51.5 9.3 5.55 2.5 26 50.1 11.2 4.46 2.4 23 48.7 12.8 3.82 1.2 6 45.7 15.1 3.03 1.1 5
045 60.8 8.9 6.80 2.9 31 57.6 10.3 5.59 2.8 27 54.8 12.4 4.42 2.6 24 52.9 14.1 3.74 1.3 6 50.9 17.2 2.97 1.2 6
050 74.2 10.7 6.96 3.5 26 71.5 12.6 5.66 3.4 23 69.7 15.6 4.47 3.4 21 66.9 18.0 3.71 1.6 5 63.7 21.5 2.96 1.5 5
060 82.0 12.1 6.79 3.9 28 78.2 14.0 5.59 3.7 24 75.8 17.1 4.44 3.6 22 74.2 19.7 3.77 1.8 5 71.4 23.2 3.08 1.7 5
070 95.1 13.9 6.86 4.5 34 90.9 16.2 5.62 4.4 30 86.6 19.7 4.40 4.2 26 83.2 22.5 3.70 2.0 6 79.1 26.8 2.95 1.9 5
080 106.8 15.9 6.72 5.1 39 103.6 18.8 5.52 5.0 35 98.8 22.1 4.46 4.7 31 95.0 24.7 3.85 2.3 7 90.3 28.6 3.16 2.2 6
090 121.3 17.7 6.84 5.8 39 116.6 20.9 5.57 5.6 35 110.6 25.2 4.40 5.3 30 106.0 28.5 3.72 2.6 7 97.9 33.6 2.91 2.4 6
020 10 33.8 4.7 7.13 1.6 21 32.0 5.4 5.88 1.5 18 30.8 6.7 4.61 1.5 16 30.0 7.7 3.92 0.7 5 29.2 9.3 3.13 0.7 5
025 39.4 5.6 7.09 1.9 23 37.2 6.4 5.84 1.8 20 35.6 7.7 4.61 1.7 18 34.7 8.8 3.92 0.8 5 33.8 10.7 3.16 0.8 5
030 43.3 6.2 6.95 2.1 28 41.0 7.1 5.79 2.0 24 39.2 8.5 4.61 1.9 21 37.9 9.6 3.94 0.9 6 36.3 11.6 3.14 0.9 5
035 50.0 7.2 6.94 2.4 29 47.5 8.2 5.81 2.3 25 45.6 9.9 4.60 2.2 22 44.1 11.3 3.90 1.1 6 42.3 13.7 3.09 1.0 5
040 56.7 8.2 6.91 2.7 32 54.1 9.4 5.74 2.6 28 52.3 11.3 4.62 2.5 25 51.1 12.9 3.98 1.2 7 48.0 15.1 3.17 1.2 6
045 64.9 9.3 7.00 3.1 35 61.2 10.5 5.83 2.9 30 58.0 12.6 4.62 2.8 26 55.5 14.2 3.91 1.3 7 52.8 17.1 3.08 1.3 6
050 78.3 10.9 7.19 3.7 29 75.2 12.8 5.90 3.6 25 73.2 15.7 4.66 3.5 23 70.4 18.1 3.88 1.7 5 66.9 21.6 3.10 1.6 5
060 86.6 12.4 6.97 4.1 31 82.1 14.1 5.81 3.9 27 79.3 17.1 4.64 3.8 24 77.4 19.5 3.97 1.9 6 74.9 23.2 3.24 1.8 5
070 100.6 14.3 7.05 4.8 38 95.6 16.3 5.87 4.6 33 91.2 19.8 4.62 4.4 29 87.5 22.4 3.91 2.1 7 83.0 26.5 3.13 2.0 6
080 112.8 16.4 6.87 5.4 43 108.6 19.0 5.72 5.2 39 104.0 22.4 4.64 5.0 34 99.9 24.8 4.03 2.4 8 94.8 28.6 3.32 2.3 7
090 128.3 18.4 6.98 6.1 44 122.3 21.0 5.81 5.9 38 116.6 25.4 4.60 5.6 33 111.6 28.5 3.92 2.7 8 103.5 33.4 3.10 2.5 7
Legend:
Flow l/s Condenser water flow rate Evaporator fluid: water
28
Variable water flow system (VWF)
Variable water flow is a hydronic control function package ■■ Operating mode at part load
that permits control of the water flow rate. Pro-Dialog+ includes two part-load operating modes:
-- Constant outlet pressure control
The VWF not only ensures control at full load, a specific -- Constant delta T control.
Carrier algorithm linked to an electronic frequency
converter also continuously modulates the flow rate to 1 – Constant unit outlet pressure control
minimise pump consumption at full load as well as part The control continuously acts on the pump speed to
load. ensure a constant outlet pressure.
The hydronic module includes pressure transducers that This solution is suitable for installations with two-way
permit intelligent measurement of the water flow rate and valves. When these close, the water speed will accelerate in
real-time display on the Pro-Dialog+ interface. All adjust- the system branches that are still open. For a fixed-speed
ments can be made directly on the interface, speeding up pump this results in an unnecessary increase of the
start-up and maintenance. pressure at the pump outlet.
As VWF acts directly on the pump, the system no longer The outlet pressure control mode ensures that each circuit
requires the control valve at the unit outlet. However, for branch always has a uniform supply, without unnecessary
applications with two-way valves a bypass system must be energy waste.
kept to guarantee the minimum flow rate.
In industrial processes such as plastic injection moulding,
Operating logic this solution ensures that each terminal unit has the
correct pressure supply.
■■ Full-load setpoint
The flow rate control at full load uses the Pro-Dialog+ 2 – Constant delta T control
interface, reducing the pump speed. This first control saves The VWF algorithm maintains a constant delta T no
energy that would normally be dissipated in the control matter what the unit load, reducing the flow rate to the
valve. For example, if the pressure supplied by the pump is minimum.
reduced by 20% the power consumption of the pump is
reduced by the same ratio, compared to a traditional This solution can be used for systems with two-way or
installation. three-way valves and achieves higher energy savings than
the “Constant unit outlet pressure control” mode. It is
suitable for the majority of comfort applications.
29
Guide specification, 61WG/30WG
Quality assurance Common 30WG and 61WG unit features
■■ The water-sourced units shall be designed for indoor ■■ The unit shall have water connections at the top/back and
installation in a plant room. a footprint size of _____ m².
■■ The water-sourced units shall use ozone-friendly refrigerant ■■ The hydronic kit, located in the upper unit section shall
R410A and include scroll compressors. include all required hydronic components including an
■■ The design and manufacturing site of the units shall be expansion tank of _____ litres.
certified in accordance with the quality management ■■ The circulation pumps have fixed speed/variable water
system ISO 9001. flow with a minimum frequency of 25 Hz. The evaporator
■■ The development test site of the units shall be certified to water pressure drop shall be _____ kPa and the condenser
the quality management system ISO 17025. water pressure drop shall be _____ kPa.
■■ The design and manufacturing site of the units shall be ■■ All hydronic and refrigerant circuit components of the
certified in accordance with the environmental management unit shall be compatible with a condenser leaving water
system ISO 14001. temperature of 65°C.
■■ The published performances for the units shall be Eurovent- ■■ The unit shall be stackable in pairs, controlled in master/
certified and all units are factory-tested before shipment. slave configuration for a total capacity of _____ kW.
■■ The units shall meet the following product quality standards: ■■ The unit shall operate with 400 V-3 ph-50 Hz (400 V ± 10%)
2006/42/EC, 2006/95/EC, 2004/108/CE, 97/23/EEC, without neutral and it shall only have one connection point.
2002/95/CE "RoHS", 2002/96/EC "WEEE", 2005/32/EC ■■ The main control panel shall be protected by a glass panel
"Ecodesign", EN14511. and shall only be opened with a special tool.
■■ The unit control circuit voltage shall be 24 V maximum,
61WG product features supplied by a factory-installed transformer. The compressor
shall offer quick keyed electrical connection.
■■ The hot-water production unit shall have a heating capacity ■■ The unit shall include numerical control, with the possibility
of _____ kW, a maximum power input of _____ kW and a of remote control. It shall ensure the control of the
COP of _____ kW/kW. compressors, evaporator and condenser water pumps and
■■ The evaporator leaving water temperature shall be _____°C the fans (drycooler).
with a temperature difference of _____ K and a condenser ■■ The numerical control shall include a patented auto-
leaving water temperature of _____ °C with a temperature adaptive Carrier algorithm that controls the operation of
difference of _____ K. the compressors and permanently adjusts to the application
■■ The hot-water production unit shall be able to produce hot characteristics including the water loop inertia.
water up to 65°C and cold water to class ___ in accordance ■■ Dangerous compressor cycles are reduced to six per hour.
with Eurovent. ■■ The control menus shall permit direct access do all unit
■■ The hot-water production unit shall have weather compen- data including the history of possible faults.
sation control, controlling a needle valve and permitting
hot-water production at a second setpoint of _____ °C,
controlled by a clock.
■■ It shall control a supplementary 4-stage electric heater
and be able to manage a relief boiler (heat pump stopped).
■■ A second circulation pump shall be controlled by the
hot-water production unit.
30WG product features
■■ The chilled-water production unit shall have a cooling

capacity of _____ kW, a maximum power input of _____ kW
and an ESEER of _____ kW/kW.
■■ The evaporator leaving water temperature shall be _____°C
with a temperature difference of _____ K and a condenser
leaving water temperature of _____ °C with a temperature
difference of _____ K.
■■ The chilled-water production unit shall be able to produce
hot water up to 60 °C and class ____ heating in accordance
with Eurovent.
■■ The chilled-water production unit shall be connected by
communication bus to a drycooler.
30

Order No.: 16121-20.02.2012. Supersedes order No.: New. Manufactured by: Carrier SCS, Montluel, France.
Manufacturer reserves the right to change any product specifications without notice. Printed in the European Union.

61WG/30WG: Water-Sourced Liquid Chillers/Heat Pumps With or Without Integrated Hydronic Module

Uploaded by

Copyright:

Available Formats

61WG/30WG: Water-Sourced Liquid Chillers/Heat Pumps With or Without Integrated Hydronic Module

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

61WG/30WG: Water-Sourced Liquid Chillers/Heat Pumps With or Without Integrated Hydronic Module

Uploaded by

Copyright:

Available Formats

Water-Sourced Liquid Chillers/Heat Pumps

with or without Integrated Hydronic Module

A large number of options is available for both versions:

Adaptability and simple installation

Internal view of 61WG unit with hydronic kit

Access to scroll compressors

Access to control panel

Unit water inlet

Evaporator water loop

Physical data, units with hydronic module

Electrical data, options 116F, 270F

Pressure head, kPa

Short-circuit stability current (TN system*) - standard unit

Electrical data notes and operating conditions:

Operating range, 61WG 30WG + drycooler

Entering water temperature at start-up °C 7.5* 27

65 Leaving water temperature during operation °C 5** 20

30WG standard unit

61WG/30WG 020-045 060-090

61WG with option 272 30WG with option 6

Pressure drop, kPa

Condenser - standard unit without hydronic module

61WG/30WG 020-045 61WG/30WG 050-090

Pressure drop, kPa

61WG/30WG 020-045 61WG/30WG 050-090

Pressure head, kPa

1 61WG-30WG 020 6 61WG-30WG 050

61WG/30WG 020-045 61WG/30WG 050-090

1 61WG-30WG 020 6 61WG-30WG 050

61WG/30WG 020-045 61WG/30WG 050-090

Pressure head, kPa

1 61WG-30WG 020 6 61WG-30WG 050

Pressure head, kPa

1 61WG-30WG 020 6 61WG-30WG 050

161 237 600

61WG/30WG 020-045 - unit with top connections (option 274)

NOTE: Non-contractual drawings. Refer to the certified dimensional drawings

61WG/30WG 020-045 - unit with condenser hydronic module (option 270)

61WG/30WG 020-045 - stackable unit (option 273)

NOTE: Non-contractual drawings. Refer to the certified dimensional drawings

Only for option 70F

61WG/30WG 050-090 - unit with top connections (option 274)

NOTE: Non-contractual drawings. Refer to the certified dimensional drawings

61WG/30WG 050-090 - unit with condenser hydronic module (option 270)

NOTE: Non-contractual drawings. Refer to the

61WG/30WG 050-090 - stackable unit (option 273)

4 NOTE: Non-contractual drawings. Refer to the certified dimensional

Legend: Application data:

Legend: Application data:

30WG product features

■■ The chilled-water production unit shall have a cooling

You might also like