GB

CONICAL CONTACT WASHERS

CONICAL CONTACT WASHERS

Description
Elastic washer that has a round knurled ring with resistance to loosening on the surface in con-
tact with the screw’s underhead. The conical Contact washers of Growermetal are produced ac-
cording to the standards NF E 25-511 and Siemens SN 70093.

Materials
• Carbon steel C60S DIN EN 10132, hardness 420–510 Hv 10 after heat-treatment for
hardening and tempering.
• Stainless steel AISI 304 (Inox A2) EN 10088, N°1.4301 cold rolled at high resistance.
• Stainless steel AISI 316 (Inox A4) EN 10088, N°1.4401 cold rolled at high resistance.

Surface treatments
• Burnished with slightly protective oiling.
• Mechanical zinc plating Cr6 free.
• Geomet®.
• Other surface treatments on request, according to the minimum delivery quantities.

Contact washer according to Contact washer according to

NF E 25-511 M standard. NF E 25-511 N standard.
To be used with hexagonal To be used with cylindrical
screw heads of resistance screw head of resistance
class 8.8 and 10.9. class ≤ 8.8 and applica-
tions with counter bores.

Medium Series Narrow series

Contact washer with teeth

Contact washer according according to SN 70093 Sie-
to NF E 25-511 L standard. mens standard.
To be used with oval Ideally suited for improving
bores and “soft” underly- the electrical conductivity of
the bolted joint connection.
ing surfaces (aluminium, The six teeth have to be di-
plastic materials, etc.) rected towards the underlying
with screws of resistance surface in order to penetrate
classes 8.8 and 10.9. into the surface and facilitate
the electrical conductivity. To
be used with screws of resist-
Large series Toothed series ance classes 6.8, 8.8 and 10.9.
 DIMENSIONS AND FEATURES

NF E 25-511 M (medium series) NF E 25-511 L (large series) NF E 25-511 N (narrow series) SN 70093 (toothed series)

Internal External Residual N° pieces N° pieces N° pieces

Screw Thickness Height N° Kg/1000 Loading
diameter diameter deflection after standard bulk micro
size min.-max. min.-max. of ribs pieces test [N]
min.-max. min.-max. loading test packaging packaging packaging

NF E 25-511 M (MEDIUM SERIES)

M3 3.10-3.35 7.71-8.29 0.57-0.63 0.80-1.00 28 0.180 2.400 0.15 2.000 60.000 500

M4 4.10-4.40 9.71-10.29 0.86-0.94 1.15-1.40 32 0.430 4.200 0.15 2.000 25.000 500

M5 5.10-5.40 11.65-12.35 1.06-1.14 1.45-1.80 36 0.720 6.800 0.20 1.000 15.000 200

M6 6.10-6.40 13.65-14.35 1.26-1.34 1.75-2.10 45 1.150 9.500 0.25 1.000 10.000 200

M8 8.20-8.56 17.65-18.35 1.36-1.44 1.90-2.35 45 2.000 17.500 0.35 1.000 5.000 100

M 10 10.20-10.56 21.58-22.42 1.55-1.65 2.25-2.75 45 3.600 27.500 0.45 1.000 3.000 100

M 12 12.40-12.83 26.58-27.42 1.75-1.85 2.60-3.10 45 6.010 40.000 0.60 500 1.750 50

M 14 14.40-14.83 29.58-30.42 2.34-2.46 3.20-3.70 45 9.700 55.000 0.60 250 1.000

M 16 16.40-16.83 31.50-32.50 2.74-2.86 3.60-4.10 60 12.100 75.000 0.65 250 900

M 20 20.50-21.02 39.50-40.50 3.14-3.26 4.30-4.90 60 22.100 100.000 0.70 100 500

NF E 25-511 L (LARGE SERIES)

M3 3.10-3.35 9.65-10.35 0.57-0.63 0.95-1.20 28 0.325 2.400 0.25 2.000 30.000 500
M4 4.10-4.40 13.65-14.35 0.96-1.04 1.40-1.80 32 1.102 4.200 0.30 2.000 13.000 500
M5 5.10-5.40 15.65-16.35 1.16-1.24 1.70-2.10 36 1.568 6.800 0.35 1.000 6.500 200
M6 6.10-6.40 17.65-18.35 1.36-1.44 2.10-2.50 45 2.466 9.500 0.40 1.000 5.000 200
M8 8.20-8.56 21.58-22.42 1.55-1.65 2.20-2.70 45 3.760 17.500 0.50 1.000 3.000 200
M 10 10.20-10.56 26.58-27.42 1.75-1.85 2.60-3.10 45 6.938 27.500 0.70 500 1.750 100
M 12 12.40-12.83 31.50-32.50 1.95-2.05 3.10-3.60 45 10.694 40.000 0.90 250 1.100 50

NF E 25-511 N (NARROW SERIES)

M3 3.10-3.35 5.76-6.24 0.47-0.53 0.70-0.90 28 0.070 2.400 0.10 2.000 17.5000 500
M4 4.10-4.40 7.71-8.29 0.77-0.83 1.00-1.20 32 0.200 4.200 0.12 2.000 45.000 500
M5 5.10-5.40 9.71-10.29 0.96-1.04 1.25-1.50 36 0.400 6.800 0.15 1.000 25.000 500
M6 6.10-6.40 11.65-12.35 1.16-1.24 1.55-1.85 45 0.707 9.500 0.20 1.000 12.500 500
M8 8.20-8.56 15.65-16.35 1.36-1.44 1.80-2.20 45 1.500 17.500 0.25 1.000 7.000 200
M 10 10.20-10.56 19.58-20.42 1.55-1.65 2.10-2.60 45 2.640 27.500 0.35 1.000 3.500 200
M 12 12.40-12.83 23.58-24.42 1.75-1.85 2.40-2.90 45 4.350 40.000 0.40 500 2.000 100

SN 70093 (TOOTHED SERIES)

Internal External N° pieces N° pieces N° pieces
Screw Thickness Height N° N° Height of Width of Kg/1000
diameter diameter standard bulk micro
size min.-max. min.-max. of ribs of teeth teeth teeth pieces
min.-max. min.-max. packaging packaging packaging

M3 3.10-3.35 5.80-6.20 0.57-0.63 0.80-0.95 28 6 0.20-0.40 0.70-0.90 0.087 2.000 100.000 200

M4 4.10-4.40 7.80-8.20 0.77-0.83 1.00-1.15 32 6 0.20-0.40 1.10-1.30 0.200 2.000 50.000 200

M5 5.10-5.40 9.80-10.20 0.97-1.03 1.25-1.50 36 6 0.30-0.70 1.90-2.10 0.410 1.000 22.000 100

M6 6.10-6.40 11.80-12.20 1.16-1.24 1.50-1.80 45 6 0.30-0.70 2.00-2.20 0.680 1.000 12.000 100

M8 8.20-8.50 15.80-16.20 1.36-1.44 1.95-2.40 45 6 0.30-0.70 2.00-2.20 1.500 1.000 6.000 100

M 10 10.20-10.56 19.75-20.25 1.56-1.64 2.15-2.60 45 6 0.30-0.70 2.00-2.20 2.680 1.000 3.500 100

M 12 12.40-12.80 23.75-24.25 1.56-1.64 2.15-2.60 45 6 0.30-0.70 2.00-2.20 3.850 500 2.250 100

M 14 14.40-14.83 23.75-24.25 1.56-1.64 2.05-2.50 60 6 0.30-0.70 2.00-2.20 3.210 500 2.250 100

M 16 16.40-16.80 31.70-32.30 2.44-2.56 3.50-3.95 60 6 0.30-0.70 4.50-4.70 10.900 100 1.000 100

M 20 20.50-21.00 39.70-40.30 2.94-3.06 4.20-4.65 60 6 0.40-0.80 4.50-4.70 21.300 100 400

Dimensions in mm.
 TORQUE OF CONICAL CONTACT WASHERS NF E 25-511 M (MEDIUM SERIES) - MECHANICAL ZINC PLATEDa
DIMENSIONS AND FEATURES

Internal diameter x Bolt 8.8b Oiled Bolt 8.8b Dry Bolt 10.9c Oiled Bolt 10.9c Dry
Screw
external diameter
size
[mm] Torque [Nm] Loadd [kN] Torque [Nm] Loadd [kN] Torque [Nm] Loadd [kN] Torque [Nm] Loadd [kN]

3.10x8.00 M3 1.5 2.4 1.7 2.4 1.8 3.4 2.0 3.4

4.10x10.00 M4 3.1 4.2 3.6 4.2 4.2 5.9 4.5 5.9

5.10x12.00 M5 7.3 6.8 7.5 6.8 8.2 9.6 9 9.6

6.10x14.00 M6 13 9.7 13.6 9.7 14 13.6 16.5 13.6

8.20x18.00 M8 27 18 29 18 40 25 46 25

10.20x22.00 M 10 74 28 79 28 89 39 95 39

12.40x27.00 M 12 98 40 101 40 113 57 121 57

14.40x30.00 M 14 153 55 161 55 181 78 190 78

16.40x32.00 M 16 245 75 254 75 282 106 301 106

20.50x40.00 M 20 452 118 477 118 498 165 517 165

TORQUE OF CONICAL CONTACT WASHERS SN 70093 (TOOTHED SERIES) - MECHANICAL ZINC PLATEDa
DIMENSIONS AND FEATURES

Internal diameter x Bolt 8.8b Oiled Bolt 8.8b Dry Bolt 10.9c Oiled Bolt 10.9c Dry
Screw
external diameter
size
[mm] Torque [Nm] Loadd [kN] Torque [Nm] Loadd [kN] Torque [Nm] Loadd [kN] Torque [Nm] Loadd [kN]

3.10x6.00 M3 1.4 2.4 1.5 2.4 1.5 3.4 1.8 3.4

4.10x8.00 M4 3.3 4.2 3.4 4.2 3.6 5.9 4.2 5.9

5.10x10.00 M5 10.5 6.8 11 6.8 11.2 9.6 13 9.6

6.10x12.00 M6 14 9.7 15.6 9.7 16 13.6 19 13.6

8.20x16.00 M8 36 18 36 18 39 25 45 25

10.20x20.00 M 10 68 28 70 28 73 39 81 39

12.40x24.00 M 12 90 40 101 40 106 57 124 57

14.40x24.00 M 14 160 55 164 55 180 78 210 78

16.40x32.00 M 16 253 75 290 75 314 106 337 106

20.50x40.00 M 20 427 118 472 118 502 165 524 165

Remarks:
Test conditions according to ISO 16047, bearing surface hardness 200-250 Hv, roughness Ra 0.6 uncoated and degreased.
a
Mechanical zinc plating 11-13my + passivation Cr6 free.
b
Screw class 8.8 DIN 931 / DIN 933 uncoated + Nut DIN 934 uncoated, coarse pitch thread.
c
Screw class 10.9 DIN 931 / DIN 933 uncoated + Nut DIN 934 uncoated, coarse pitch thread.
d
75% of nominal yield point (stress at 0.2% non-proportional elongation Rp0,2 ) according to ISO 898-1
The abovementioned information, which has been obtained following empirical laboratory tests, are to be considered as a mere
information, provided by Growermetal S.r.l. at the sole purpose to improve the assembling of the product. Growermetal S.r.l.
refuses any responsibility related to the terms of use of the product, which fall under the single user’s responsibility.
 APPLICATION FIELDS

The conical Contact washers are generally used with bolts of 6.8, 8.8 and 10.9 classes and than-
ks to their features they are suitable in several fields of application where high elastic and faste-
ning performances are required.

Motors Safety assembling Transmissions

Electromechanics Industry supplies Heavy - construction mechanics

PACKAGING

(1)

(2)
Types of packaging available:
(3) Standard packaging (1)
Bulk packaging (2)
Micro packaging (3)