The Role of Knowledge Management in Improving the

Adoption and Implementation Practices of

Industrialised Building System (IBS) in Malaysia

Abdullah, M.R.
University of Salford
(email: [email protected])
Egbu, C.
University of Salford
(email: [email protected])

Abstract

In Malaysia, the strategic changes towards the promotion of the concept of Industrialized Building
System (IBS) started in 1998. It is envisaged that the benefits expected from the adoption of IBS will
have positive and dramatic impact on the culture of building practices. An important issue which is
likely to influence the wider and successful implementation of IBS is the role that knowledge
management plays in this regard. This relates to such issues as the knowledge ability and skills of the
workforce, and the role that knowledge sharing plays in effective decision making processes to do
with IBS implementation in its many and different disguises. Through a literature review, and from a
knowledge management perspective, this paper highlights some of the main issues that may
contribute to the implementation of IBS in Malaysia construction industry. This paper also reviews
existing strategies associated with the adoption for IBS, especially as they relate to lack of knowledge
and awareness among industry players and stakeholders. Some conclusions are offered relating to the
level of knowledge needed to change the readiness and perception of key stakeholders toward
successful and wide adoption of IBS. These include, inter alia, the need for improvement of existing
university curricular related to design and construction process, continuous learning among
professionals, training and knowledge sharing initiatives. This paper recommends that a robust and
holistic approach to the adoption of IBS is needed and vital in order to tackle the many and related
issues to do with both the adoption and implementation of IBS in Malaysia. This integrated approach
should consider the knowledge awareness, strategic procurement, production process philosophies,
contractual arrangement, strategic policy and decision making process to mention but a few.

Keywords: industrialized building system, knowledge management

 1. Introduction

It is very unlikely that Industrialised Building System (IBS) has commonly been agreed and accepted
in it definition (Hamid, 2008). Despite been argued by many researchers on the common term,
generally the IBS could be seemed according to their stand. Elliot (2003) suggests that IBS should be
seen from the philosophy rather than product or system. However some of the evidence shows that
IBS undoubtedly can be define from the perspectives of process, product, technology, method,
techniques, system or philosophy. According to Warszawski (1999) IBS can be viewed as a set of
interrelated elements that act together to enable the designated performance of the building. It is also
been supported that IBS can be defined as an investment in equipment, facilities and technology with
the purpose of increasing output, manual labour saving and quality improvement. Gibb (1999) claims
IBS as a process. It was described as incorporating prefabrication and preassembly that involves
design and manufacturer of units of modules, usually remote from the work site and their installation
to form a permanent work at site.

In Malaysia, it has been recorded by some authors that IBS is the system or techniques. Parid (1997)
defines IBS as a system which uses industrial production techniques either in production of
components or assembly of the building or both. In addition to that, Trikha (1999) claims that material
assembling was used as IBS fundamentals in definition. It clearly suggested that IBS as a system in
which concrete components prefabricated at site or factory are assembled to form a structure with
minimum on site construction. Rahman and Omar (2006) outline IBS as a construction system that is
built using pre fabricated components. Construction Industry Development Board (CIDB) also
established their own definition for IBS to be known as a construction techniques in which
components are manufactured in a controlled environment (On or Off site), transported, positioned
and assembled into a structure with a minimal additional site works ( CIDB,2003) IBS can be
classified into four major sub structural system known as Conventional System, Cast insitu
Formworks System, Prefab Panel System and Combination Composite System (Kadir et al 2006).

2. Literature review

2.1 Implementation of IBS project in Malaysia

It has been recorded that IBS has been used in Malaysia since 1964 when government took a role of
introducing the IBS to pilot project in Kuala Lumpur when 3000 units of 7 blocks of 17 storey and 4
block of 4 storey flats and 40 units shop lots was constructed in 22.7 acres of Land at Jalan Pekeliling,
Kuala Lumpur by Gammon/Larsen Nielson as contractor using Danish System of IBS (Thanoon et al
2003).

Since then, the implementation of IBS as a construction system in many projects has been generally
developed. In 1980s when Malaysia economic stated the growth of construction industry at an average
of 13%, Selangor State Development Corporation (PKNS) acquired precast concrete technology from
Praton Haus International based on Germany to build low cost walk up flats and high cost bungalow
in Selangor (CIDB,2003). In 1984, the usage of steel structure as once of IBS has gained attention to
construct the 36 storey of Dayabumi office complex by Takenaka Corporation of Japan (CIDB, 2003).
In 1990s, the development of information technology (IT) was utilised to incorporate IBS design,
production and site management. Rahman and Omar (2006) have claimed that the Brickfield
Secondary School 1 in Kuala Lumpur as reference of IBS project used the IT facilities. It is recorded
that prefabrication concrete panel was utilised using IT in planning the congested and limited site
constraints.

The late 90s and early 2000 the government used the precast concrete load bearing wall as IBS type of
construction. It was implemented to complete a serial of staff quarters and government
accommodation in Senawang, Kuala Kangsar, Putrajaya (Rahman and Omar, 2006). The other
testimonial of successful IBS projects constructed are Petronas Twin Towers in 1993; Monorail; Light
Rail Transit; Vista Komenwel for 98 KL Commonwealth Games; Aquatic Stadium in Bukit Jalil;
National Stadium in Bukit Jalil KL Tower; Putrajaya Bridge; Mutiara Damansara Shopping Centre;
KL Central Station; Kuala Lumpur International Airport (KLIA); Putrajaya Housing; Teachers
Quarters to mention but a few.

2.2 Issues and challenges

It is generally been agreed that few factors and issues are associated with the implementation of IBS.
It has been highlighted by Meiling & Johnson (2008), that Lessing et al (2005) have outlined the
characteristics or factors of IBS been successful among others are planning and control during the
process; technical system developments; offsite manufacturing; long term relationship; supply chain
management; customer focus; usage of information technology (IT); and systematic performance
measure. Rahman and Omar (2006) highlight that mass construction method, lack of involvement
from small contractors and lack of knowledge and exposure to IBS technology. Hussien (2007) elicits
from the IBS Steering Committee of CIDB Malaysia 2003-2005 which identified the challenge of
implementation among others are development of standard plans and standard component; apprentice
training; testing and evaluation programme; vendor development program; and readiness of designers
and consultants. Kamar et al (2009) enumerate the barriers to implement the IBS in Malaysia are
readiness, cost issues, awareness and knowledge, planning and implementation and negative
perception.

However, Abdullah & Egbu (2009) claim that economy development, nature of industry, perception
of current conventional construction industry, stakeholder’s readiness and research development are
identified as an issues and challenges of adoption for IBS. The issues and challenges faced by the
industry key players will reflect the level of IBS adoption in Malaysia. It has been revealed from the
report by CIDB that the level of usage of IBS is only 15% in 2003 (CIDB, 2003). IBS Roadmap 2003-
2010 outlines the structured and formal guideline for construction stakeholders to adopt total concept
of IBS in Malaysia. Hence, that strategic planning is seems to achieved off targeted. Haron et al (2009)
state that it generally has been accepted that the level usage and implementation of IBS in Malaysia is
still very low.
 2.2.1 Knowledge awareness of key players

Rahman & Omar (2006) highlight that lack of knowledge in structural analysis and design of pre
fabricated components among civil engineers and those related to construction discourage the further
implementation of IBS. Hence, the implementation of IBS is hindered by a lack of scientific
information (Razali et al, 2005). Chung & Kadir (2007) observe that most of local authorities in
Malaysia are unlikely to change local building regulation to comply the IBS element due to
knowledge capacity. It is quite certain that implementation of Modular Coordination (MC) concept
trough the amendment of Uniform Building by Low (UBBL) is yet to be executed due to limited
knowledge and awareness (Kamar et al, 2009).

2.2.2 Level of workforce skill

Labour usage represents one of the critical elements in Malaysian construction industry due to severe
shortage of local workers (Kadir et al, 2006). It is very unlikely that IBS required a high number of
labours in it production and erection (Marsono et al, 2006). Some of the evidence show that IBS has
reduced the numbers of workers on site due to mechanisation, automation and robotics system
whenever the machinery is employed to ease the work of the labours (Richard, 2005). The
effectiveness of labour productivity in IBS has been revealed by studies carried out by Kadir et al
(2006). The used of information technology (IT) in design, production and erection has significantly
required the knowledge and skills. Designers and managers in IBS production factory and on site
required the knowledge of IT to plan and execute used the tools offer by IT such as simulation for
components production, CAD/CAM Software, Project planning software. Technology can be used to
improve firms/ ability in terms of the effective use of information (Jaafar et al, 2007). Rahmat et al
(2004) highlighted that most important skill and knowledge for managers are communication,
leadership and building regulations knowledge which lead to take up the IBS complexity to be
implemented. Haron et al (2009) highlight that lack of skilled and knowledgeable manpower in IBS
seems to be the barriers and hindrances of IBS adoption.

2.2.3 Policy and decision making process

The adoption and implementation of IBS or Prefabrication and modular construction should enhance
environmental awareness through education and training focused by the government (Tam et al 2007).
The role of government in establishing the policy for strategic level of implementation is a significant
impact on the IBS issues. The incentives and promotion offered by statutory authorities and
government policies are desirable through planning approval process whereby more floor areas are
allowed to be built (Chaing et al, 2006). The demand and impact for prefabrication or IBS post war is
significant due to changes of institutional environment been promoted the prefabrication or IBS to be
taken up especially as policy option (Oonagh,1987).

Goodier & Gibb (2007) suggest that negative connotations and perception of offsite and IBS need to
be conquered for more information to decision makers to make a consideration of IBS and offsite
implementation especially cost comparisons with the traditional method. Rashid (2009) suggests that
collaborative approach between designer and manufacturer to make joint decision making in
finalisation of IBS design is significant. The issues of decision making for best selection of IBS can
be classified as the skill and competencies of project team. The appropriate type of IBS is depending
on various perspectives.

3. Methodology

This research paper is based primarily on a literature review of IBS development and related issues in
Malaysia. The main idea is to present the scenario of IBS implementation issues in term of the
knowledge roles and contribution factors that affected the total adoption. This preliminary study is
part of the conceptual framework of PhD research to further explore the most significance issues in
IBS type of selection.

The study will be conducted through the qualitative method of research. The questionnaires will be
designed to strengthen the proposed case studies from the IBS project stakeholders’ perspectives. An
analysis will help to justify the aims and objectives expected. Verification will be carried out with
experts in the area through semi structured interviews and focus group session. The long term aim of
the PhD research is to improve decision making process in selection of the type of IBS for housing
and office buildings in Malaysia.

4. Discussion

4.1 IBS and knowledge management

Knowledge is an awareness of what one knows through study, reasoning, experience or association or
through various type of learning (McInerney, 2002). Devenport and Prusak (1999) define knowledge
as a fluid mix of framed expertise, values, contextual information and expert insight that provides a
framework for evaluating and incorporating new experiences and information. Knowledge
Management (KM) is defined as any process or practice of creating, acquiring, capturing, sharing and
using knowledge, wherever it resides, to enhance learning and performance in organisation
(Scarborough et al, 1999). KM involves knowledge identification, creation, acquisition, transfer,
sharing and exploitation. KM is vital for work efficiency in projects and for improving organisational
competitiveness (Egbu, 2000&2001) and the need for KM in the construction industry is fuelled by
the need for innovation, competency, improved business performance and client satisfaction.

Knowledge Sharing (KS) is one of the KM processes and also one of the main components in
knowledge management system – KMS (Alavi, 2001; Earl, 2001). Ismail & Yusof (2008) describe
that KS refers to any type of knowledge including explicit knowledge or information, ‘know how’ and
‘know who’ tacit knowledge in the forms of skill and competency.

4.2 KM roles in improving the implementation of IBS

It is generally agreed that KM plays a role as a process of knowledge and information sharing and
transfer from individual to another or groups. Hence, the lack of knowledge from one party will not be
ensuring the other parties successful adoption of the knowledge and information. Much of KM
focuses on the role of information technology (IT) and information systems (IS) and the tools that aid
knowledge transfer and storage (Egbu, 2000; 1999).

It is been suggested that IT in 1990s plays a significant role in IBS in Malaysia when it showed
improvement in structural performance (Kadir et al, 2005). Sexton et al (2006) also postulated Rogers
(1995) that the adoption and implementation of new method of construction system shall require the
consideration from knowledgeable designers and adequately persuaded the merits of Modern Method
of Construction (MMC) in their decision making process of selecting the type of framing system. The
argument been highlighted by Sexton et al (2006) assert the KM process must be recognised by the
designers and project stakeholders to realise the viability of structural or building systems alternative
through the application of Information Technology (IT) design support tools.

Rashid (2009) claims that examination conducted between designers and manufacturers of IBS in
studying the collaboration revealed the miss matched between designing and manufacturing of local
IBS products. It is suggested that improvement needs to be done. Hence, knowledge sharing and
transfer initiatives in KM seems to be significant in this context.

4.2.1 Education curriculum and syllabus

According to various authors, the role of education curriculum and syllabus in higher education centre
and universities related to engineering and construction process programs need to be enhanced with
the advance and update technology in construction industry especially IBS (Rahman & Omar, 2006;
Warszawski, 1999; Haron et al, 2009; Thanoon et al, 2003) .

Rahman & Omar (2006) suggest that subjects related to design and construction of precast concrete
and other related IBS products should be offered as elective for graduated studies. It is also
recommended that university curriculum and syllabus of construction and engineering shall consider
adopting new topics of IBS. The academic curriculum in universities seldom incorporates courses on
technology, organisation, construction and the design of IBS (Warszawski, 1999). Haron et al (2009)
claim that knowledge level of IBS courses in engineering course based in Malaysia universities are
lacking in exposure. The initiatives have been done on 9th May 2006 when a forum of Implementation
of Syllabus for IBS was held by CIDB (CIDB, 2006). That knowledge sharing initiative seems to be
successfully implemented.

4.2.2 Research and development

It has been generally accepted by various authors that the degree of research and development (R&D)
in IBS is lacked behind in term of the development of new materials for IBS components, local design
and manufactured building system, scientific information, modern method approaches and innovation
(Haron et al, 2009; Kamar et al, 2009; Hamid, 2008; Rahman & Omar, 2006; Thanoon et al, 2003;
Razali et al, 2002; Badir et al, 2002;).
There are few R&D of IBS activated in Malaysia universities such as IBS Centre of Construction
Research Institute of Malaysia (CREAM) and CIDB in Kuala Lumpur; Housing Research Centre
(HRC) of UPM Civil Engineering Faculty in Serdang, Selangor; Open Building Research and
Consultancy Team of UTM Skudai in Johore. The potential of R&D in IBS has been vast discussed
by several researchers in the area of materials and management. According to CREAM (2008), it is
recorded that 32 R&D projects undertaken by CREAM and only 14 of these are IBS related.

4.2.3 Innovation

It is generally agreed that relationship between KM and innovation has been widely discussed by
scholars and practitioners in literature (Tasmin & Woods, 2008). It is generally recognised that KM
can promote innovation and business entrepreneurship; help in managing change, and for
emancipating and empowering employees (Egbu, 2000). Egbu (2000) stated that construction has not
been as innovative as other industries even historically been highly innovative. Egan Report (1996)
has recommended that lesson learnt from manufacturing sector and innovative culture must be created.
It is seemed to be a challenge of construction industry when innovation required powerful drivers and
right people with right culture to take place (Egbu, 2000).

Innovation can be as new as improvement. In IBS, the new construction materials or new method of
construction associated as innovation. Sumadi (2002) states that innovations in the areas of materials,
Information Technology (IT) and robotics are improving building quality in terms of industrialisation
process and construction method. It has been viewed that materials innovations can be classified into
two general categories which are known as new and improved material such as high performance
concrete and prefabricated composite elements.

4.2.4 Information technology

The innovation in IT has shown the significant effect on the development of construction industry.
Gajamani & Varghese (2007) highlight that the used Radio Frequency Identification (RFID) in
prefabricated building and IBS components would seems to improve the project scheduling and
monitoring due to compatibility of working with the other software such as MS Project and AutoCAD.
Rahman & Omar (2006) state that use of Information Technology (IT) in design and visualization
software and facilities such as 3D, 4D, nD and Building Information Modeling (BIM) to improve the
process of Feasibility Study, Cost Modeling, Site Layout, Project Planning & Control has shown a
significant impact in IBS construction industry improvement especially the risk reduction exercises.
The most lacked information such as new technology of IBS will gain higher risk. Hence, the
application of IT in IBS would seem to be beneficial.

4.2.5 Knowledge base decision making and selection criteria

Uriel & Lozano (2004) has developed a knowledge base system (KBS) for house layout selection and
it has been demonstrated that Computer Algebra System can be used to improve the design process.
Hence, the roles of knowledge are significant to be take place in improvement process. The KBS was
based on the criteria of local climate, building site and customization or end users needs. In this
relation, Pan (2006) outlines the criteria for build system selection into eight domains known as value
for decision. The cost, time, quality, health and safety, sustainability, process, procurement and
regulatory & statutory acceptance are identified as the selection criteria. These identified criteria seem
to be critical factors for best selection of IBS type of product.

4.2.6 Knowledge sharing initiatives

The knowledge sharing initiatives among the professionals and stakeholders should be promoted to
improve industry, organisation and individuals. Thus initiatives such as conference, seminars,
symposium and dialog either locally or globally may contribute to the knowledge flows for
participants to make informed and knowledge base decision making.

The sharing of knowledge among the manufacturing sectors and construction players has benefited
construction industry when the improvement significantly takes part. The used of Just in Time (JIT)
concepts or philosophy in precast concrete components has been proved to make a significant result in
Japan construction industry. The JIT philosophy commonly known as Toyota production System
originated from manufacturing sectors (Pheng & Chuan, 2001). That JIT concept then has been
translated into English as lean production system dealt with right materials supply in right time, time
place and right amount at every step of process. Hook & Stehn (2008) affirm the idea of Koskela &
Ballard (2006) that lean construction is a test of conventional paradigm of project based on economics
theories and adopt the theories of project management in production. IBS as defined earlier related to
Offsite Manufacturing seems to be closed integrated with this concept.

4.2.7 Training and continuous learning

Continuous Professional Development (CPD) is a life-long learning process that maintains, enhances
or increases the knowledge and skills of professionals to ensure their knowledge and ability are
relevant to the needs of society (Board of Architect Malaysia, 2004) . This approaches in various
professional bodies such as Board of Engineer and Board of Architect is to ensure the level of
knowledge acquired and current issues related has been address in professionals and designers
practices. Hence this will help professional to face spectrum changes and take advantage of the
opportunities that may arises and also to underpin the value of their professional qualification. Ariffin
and Torance (2008) quoted that one of the interviewees has been agreed that CPD will updated and
exposed to the latest construction technologies. It also quoted that the sharing of experiences by these
self-employed consultants at CPD activities allowed the non-consultant registered professional or
designers to maintained their ''true'' professional knowledge.

The initiatives of CPD held by various professionals’ board and bodies through serials of trainings,
short courses and seminars will enhanced the professional designers and practices to share the
knowledge. It has been agreed that an attendances in this continuous knowledge management and
knowledge sharing activities is compulsory for renewal membership requirement. The series of
seminar related to IBS held by universities, research centre and professional bodies with or
collaboration of CIDB or others related partners has been actively recorded since 1998 until today.
Hence the improvement of IBS total adoption is still been questioned.
 5. Conclusion and discussion

This paper recommends that holistic and integrated approaches to adopt the IBS in Malaysia are
significant. The issues arises to challenge the implementation of strategy, policy, procedures, method
of IBS is a process of maturity of knowledge evolution for construction industry players. This robust
approach in particularly from the KM perspective is considered as development of human capital
which is prerequisite for industrialization process. The technology and human issues will lead the
industry to achieve sustainable development. The significant roles of knowledge in any discipline
including construction which has been perceived as lack of knowledge and skill awareness can
overcome the dilemma by strategic planning from government and actives roles by industry players.
The full commitment from project stakeholders to innovate and justify the risk is speculated to be as
critical factors. An appropriated decision making model to facilitate the related parties to analyse and
evaluate the best option of IBS in selecting the technology in IBS types and classification. Hence the
perception of IBS as prefabricated and offsite only shall be widening up to the philosophical level in
knowledge management desired. The role of knowledge management in improving any kind of
activities has significantly affected the process and final products and must be reviewed in a holistic
manner.

References

Abdullah.M.R, and Egbu.C.O.(2009) “Industrialised Building System in Malaysia: Issues for

Research in A Changing Financial and Property Market” Proceeding of 9th International
Postgraduate Research Conference (IPGRC), 29-30th January 2009,Salford Quays, Greater
Manchester, UK.15-25

Abosaad.H, Underwood.J, Boveny.S (2009)”Towards an Information System Representation of OSM

in Facilitating the Virtual Prototyping of Housing Design”, Proceeding 9th International
Postgraduate Research Conference (IPGRC) Salford, United Kingdom, pp. 509-520

Alavi.M, and Leidner.R (2001) “Knowledge Management and Knowledge Management Systems:
Conceptual foundations and research issues”, MIS Quarterly 25; 107-132, 2001

Arrifin.M.H and Torrance.V.B.T (2008) “Social Group Related Entry Participation Motivations for
Continuing Professional Development Activities Among Malaysian Registered Quantity Surveyors”,
Journal of Construction in Developing Countries, Vol. 13, No. 2, 2008,USM, Penang.

Badir, Y., Kadir, M. R. A., Ali, A. A. A. (1998) “Theory of Classification: Its' Application and
Building Systems Classification”. Journal of Institute Engineers Malaysia (October)

Board of Architect Malaysia, Gen. Cir. No. 3/2004 (CPD Guidelines Revised Sept. 2004), Lembaga
Arkitek Malaysia, JKR.
Chiang.Y.H, Chan.H.W.E, Lok.K.L.L (2006) “Prefabrication and Barriers to Entry- A Case Study of
Public Housing and Institutional Buildings in Hong Kong”, Habitat International, 30, 2006, 482-499.

Construction Industry Development Board Malaysia (CIDB) (2003) IBS Survey 2003, Kuala Lumpur

Construction Industry Development Board Malaysia (CIDB) (2006) IBS Digest, Issue 2, 2006.

Construction Research Institute of Malaysia (CREAM)“Implementation Framework For CIMP

Target Through R&D Initiatives – A National Construction Industry Agenda (2008-
2015)”.Unpublished Report of CREAM.

Davenport.T, and L.Prusak.,(1999) “Working Knowledge: How Organisations Manage What They
Know”, Harvard Business School, Boston.

Earl.M (2001)“Knowledge Management Strategies: Towards Taxonomy”, Journal of Management

Information System, 18, 215-233, 2001

Egan,J (1998) Rethinking Construction, DETR,UK.

Egbu.C.O,(1999) “The Role of Knowledge Management and Innovation in Improving Construction

Competitiveness”, Building Technology and Management Journal, Vol. 25, 1 – 10.

Egbu.C.O.(2000) “The Role of IT in Strategic Knowledge Management and its Potential in the
Construction Industry”, UK National Conference on Objects and Integration for Architecture,
Engineering, and Construction. 13 - 14th March 2000, BRE, Watford, UK, 106 – 114.

Egbu.C. O., Gaskell.C, and Howes. J. (2001) “The Role Of Organisational Culture And Motivation In
The Effective Utilisation Of Information Technology For Team Working In Construction”,
Proceedings of the 17th Annual Conference of the Association of Researchers in Construction
Management (ARCOM), 91-100, 5-7 September, University of Salford, UK.

Elliot K.S (2003) “Off Site Prefabrication of Concrete Structures”, Conference Proceeding on
Industrialised Building Systems, KL, 10-11 Sept. 2003, CIDB. pp 7-19.

Gajamani.G.K, Varghese.K. (2007) “Automated Project Schedule and Inventory Monitoring Using
RFID”, Proceeding of 24th International Symposium on Automation & Robotics in Construction
(ISRAC 2007), Madras, India.

Gibb, A. G. F. And Isaac, F (2003) “Re-engineering through Pre-assembly: Client Expectations and
Drivers”, Building Research & Information, 31(2), 146–160.

Gibb, A., Ed. (1999)”Offsite Fabrication”, Whittles Publishing.

Hamid, Z., Kamar, K. A. M., Zain, M., Ghani, K., Rahim, A. H. A (2008) “Industrialized Building
System (IBS) in Malaysia: The Current State and R&D Initiatives”, Malaysia Construction Research
Journal, Vol. 2 (1), pp 1-13

Hook.M. and Stehn.L.(2008) “Lean Principles in Industrialised Housing Production: The Needs for a
Cultural Change”, Lean Construction Journal 2008, pp.20-33.

Hussien.J (2007) “Industrialised Building System: The Challenge and The Way Forward,” Keynote
address at Construction Industry Research Achievement International Conference (CIRAIC), CIDB,
PWTC, Kuala Lumpur.

Jaafar.M., Ramayah.T., Aziz.A.R.A., and Saad.B.(2007) “Technology Readiness among Managers of

Malaysian Construction Firms”, Engineering, Construction and Architectural Management, Vol.14,
No.2, 2007,pp180-191.

John Meiling And Helena Johnson (2008) “Feedback in Industrialised Housing: Why Does It Not
happen?”, Proceeding of 24th Annual ARCOM Conference, 1-3 September, Cardiff, UK, Association
of Researchers in Construction Management, 145-154.

Kadir, M.R.A, W.P.Lee, M.S.Jaafar, S.M Sapuan, Ali.A.A.A (2005) “Performance Comparison
Between Structural Element of Building Systems in Malaysia”, American Journal of Applied Science
2 (5), 1014-1024, 2005.

Kamar.K.A.M., Alshawi.M., and Hamid.Z.(2009) ”Barriers to Industrialised Building System (IBS):

The Case of Malaysia”, Proceeding of 9th International Postgraduate Research Conference (IPGRC),
29-30th January 2009,Salford Quays, Greater Manchester, UK.pp471-485

Koskela.L and Ballard, G (2006) “Should Project Management be Based on Theories of Economics or
Production?” Building Research & Information, 34(2), 154-163.

Majzub (1977) Modular Housing System Used Around the World, International Journal of Housing
Science and Its Application. Vol. 1.

McInerney.C.(2002) “Knowledge Management and the Dynamic Nature of Knowledge”, Journal of

the American Society for Information Science and Technology,53(12), pp 10009-1018.

Pheng L.S., and Chuan.J.C (2001) ”Just In Time Management of Precast Concrete Components”,
Journal of Construction Engineering and Management, November December 2001,

Rahmat,I.,Morad.M., Maslina.A.(2004) ”The Complexity of IBS Construction”, Proceeding

Conference of Scientific and Social Research (CSSR)UiTM, Petaling Jaya.
Rahman A.A.B and Omar.W (2006) ”Issues and Challenges in the Implementation of Industrialised
Building Systems in Malaysia”, Proceeding of the 6th Asia Pacific Structural Engineering and
Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Rashid.A.K (2009) ”Industrialised Building Systems: The JKR Perspectives”, Malaysian

Construction Research Journal (MCRJ); Vol4, No.1, 2009.CREAM.

Scarbrough, H., Swan, J. And Preston, J (1999) “Knowledge Management: A Literature Review”,
London: Institute Of Personnel and Development.

Sumadi.R.S (2002) “Current World Trends and Development in IBS”, Master Builders, 4th Quarter
2002, MBAM.

Tasmin, R. & Woods, P.(2007) “Relationship between corporate knowledge management and the
firm’s innovation capability”, International Journal of Services Technology and Management, 8(1),
62-79.

Trikha, D. N (1999) “Industrialised Building System: Prospect in Malaysia,” Proceeding of World

Engineering Congress, Kuala Lumpur.

Uriel.A.G. and Lozano E.R.(2004), “A Knowledge Base System for House Layout Selection”,
Mathematics and Computer in Simulation, 66, 2004, 43-54

Warszawski, A., Ed. (1999). “Industrialised and Automated Building System: A Managerial
Approach”, E&FN SPON