Scribd
Upload
367 views1 page

Tank Nozzle Displacement Calculation Sheet

1) The document provides calculations for shell deflection, rotation, and vertical expansion at an 8-inch nozzle on tank TK-2201 A,B. 2) It calculates the unrestrained outward radial growth of the shell to be 20.29 mm and the unrestrained rotation of the shell to be -0.006 radians (-0.365 degrees). 3) It also calculates the vertical expansion at the nozzle opening location due to vertical tank growth to be 0.55 mm.

Uploaded by

prabu2001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
367 views1 page

Tank Nozzle Displacement Calculation Sheet

1) The document provides calculations for shell deflection, rotation, and vertical expansion at an 8-inch nozzle on tank TK-2201 A,B. 2) It calculates the unrestrained outward radial growth of the shell to be 20.29 mm and the unrestrained rotation of the shell to be -0.006 radians (-0.365 degrees). 3) It also calculates the vertical expansion at the nozzle opening location due to vertical tank growth to be 0.55 mm.

Uploaded by

prabu2001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Petrofac International Ltd. Rev.

0
Attachment to PIPING STRESS ANALYSIS
DOC TITLE
Sharjah REPORT (SYSTEM: SYS-058)

JOB No. JI-191 DOC. NO. Attachment to JI-191-PI-08-0000-10106

SHELL DEFLECTION AND ROTATION


AT 8" NB N1 NOZZLE OF TK-2201 A,B NODE NO : 1670, 1900

AT MAX DESIGN TEMP

1) The unrestrained outward radial growth of the shell at the center of the opening connection resulting from head
and/or thermal expansion

W = 9.8x10-6 GHR2x[1-e-βL cos(βL)-L/H]/Et+αRΔT

2) The unrestrained rotation of the shell at the center of the nozzle -shell connection resulting from product head

θ = 9.8x10-6 GHR2x[1/H-βe-βL[cos(βL)+sin(βL)]/Et

3) Vertical expansion at the location of nozzle opening due to vertical growth of the tank

Y = LxαxΔT

Where,
G = Design Specific Gravity of Liquid 0.9
H = Max. Allowable Tank Filling Height (mm) 14630
R = Nominal Tank Radius (mm) 8530
E = Modulus of Elasticity (MPa) 2.00E+05 USER TO INPUT
t = Shell Thickness of Opening (mm) 9 DATA
L = Vertical Distance from Opening Centerline to Tank Bottom (mm) 305
ΔT = Nominal Operating Temperature - Installation Temperature (oC) 147
α = Thermal Expansion Coefficient of Shell Material mm/mm/oC 1.2255E-05
β = Characteristic Parameter, 1.285/(Rt)0.5 (1/mm) 0.0046378

W = 9.8x10-6 GHR2x[1-e-βL cos(βL)-L/H]/Et+αRΔT


20.29 mm

θ = 9.8x10-6 GHR2x[1/H-βe-βL[cos(βL)+sin(βL)]/Et
-0.006 radians
-0.365 degree

Y= LxαxΔT
0.55 mm

REFERENCES:
1) API-650, WELDED STEEL TANKS FOR OIL STORAGE: APPENDIX P CLAUSE P.2.5

TK-01-8" N30 NODE 4070-SYS211 Page 1 of 1

You might also like