Scribd
Upload
21 views1 page

Materials and Measurement Lab: Department of Mechanical Engineering Rewa Engineering College, Rewa

The document outlines safety rules and procedures for students conducting experiments in a materials and measurement lab. It details requirements for preparation, supervision, protective equipment, attire, emergency procedures, cleanliness, and hazards. Failure to follow the rules may result in not being allowed to participate in laboratory experiments.

Uploaded by

amit shukla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views1 page

Materials and Measurement Lab: Department of Mechanical Engineering Rewa Engineering College, Rewa

The document outlines safety rules and procedures for students conducting experiments in a materials and measurement lab. It details requirements for preparation, supervision, protective equipment, attire, emergency procedures, cleanliness, and hazards. Failure to follow the rules may result in not being allowed to participate in laboratory experiments.

Uploaded by

amit shukla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Materials and Measurement Lab

Department of Mechanical Engineering


Rewa Engineering College, Rewa
 BE PREPARED. Read and fully comprehend the lab procedure
as set forth in the lab manual before you begin any experiment. If
you do not understand the procedure, see your instructor/TA.
 THINK SAFETY. Work deliberately and carefully. No
horseplay
 ALL LABORATORY STUDENTS MUST BE
SUPERVISED Never work alone
 KNOW THE HAZARDS OF ANY MATERIALS OR
MACHINERY YOU ARE WORKING WITH. The laboratory
manual and/or instructor will review specific safety issues on
individual experiments before you perform any tests.
 ALL STUDENTS MUST WEAR APPROPRIATE SAFETY
EQUIPMENT. Safety goggles must be worn anytime any
laboratory experiment is being performed. Additional safety
equipment must be utilized based on specific experiment
requirements.
 ALL STUDENTS MUST WEAR APPROPRIATE
LABORATORY ATTIRE. No open toed shoes; no loose fitting
clothing; Jewellery should be removed; long hair should be tied
back
 NO FOOD OR BEVERAGE IN THE LABORATORY.
 KNOW EMERGENCY PROCEDURES. Make note of fire
escape routes and emergency phone locations.
 REPORT ANY PERCEIVED SAFETY
HAZARDS. Immediately report any spills, equipment
malfunctions, injuries or other perceived safety hazards to your
Instructor / TA / or staff member.
 KEEP YOUR WORK AREA CLEAN.
 FAILURE TO CONFORM WITH ANY OF THE ABOVE
RULES MAY RESULT IN NOT BEING ALLOWED TO
PARTICIPATE IN THE LABORATORY EXPERMENT.

You might also like