Scribd
Upload
66 views2 pages

Room and Storage Temperature Control

This standard operational procedure outlines the process for controlling storage and room temperatures. It applies to all areas requiring temperature control, including warehouses, production processes, and testing labs. Key responsibilities include daily temperature checks by department personnel, addressing any out of specification temperatures, and QA verification of temperature logs. Temperature ranges specified are 15-30°C for dry areas, 25±2°C for electronics storage, 23±2°C for testing labs, and below 0°C for freeze areas. Humidity is to remain below 70% relative humidity.

Uploaded by

Linda Setya Wati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
66 views2 pages

Room and Storage Temperature Control

This standard operational procedure outlines the process for controlling storage and room temperatures. It applies to all areas requiring temperature control, including warehouses, production processes, and testing labs. Key responsibilities include daily temperature checks by department personnel, addressing any out of specification temperatures, and QA verification of temperature logs. Temperature ranges specified are 15-30°C for dry areas, 25±2°C for electronics storage, 23±2°C for testing labs, and below 0°C for freeze areas. Humidity is to remain below 70% relative humidity.

Uploaded by

Linda Setya Wati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Standard Operational Procedure Doc Number.

Rev.
Effective Date. 06 July 2020
ROOM AND STORAGE TEMPERATURE CONTROL Page. Page 1 of 2

CHANGE NOTE

CN Number Description Originator Submit Date

Approval :

1. OBJECTIVE
To lay down the procedure for storage temperature control of raw material and production process.
Standard Operational Procedure Doc Number.
Rev.
Effective Date. 06 July 2020
ROOM AND STORAGE TEMPERATURE CONTROL Page. Page 2 of 2

2. SCOPE
This SOP shall be applicable for all process or storage area which has temperature control.

3. RESPONSIBILITY
Warehouse, Testing Lab and all Production Department.

4. DEFINITION
4.1 Humidity: is the concentration of water vapor present in the air. Water vapor, the gaseous state of water.
4.2 Temperature: is a measure of the warmth or coldness of an object or substance with reference to some
standard value

5 EQUIPMENT/TOOLING
Thermometer, Hygrometer or Thermo hygrometer

6 PROCEDURE
6.1 Each department shall ensure that temperature and/or humidity required is under control based on
product or material specification.
6.2 Temperature checking have to daily performed by person in-charge at each department and recorded on
the “temperature control log” form.
6.3 Production in-charge should immediately inform GA team if found temperature of spec for further
corrective action.
6.4 QA will perform regular verification on this record form to ensure it well implemented on the process.
6.5 Storage/room temperature was control as below requirement:
Dry Area
Freeze Area
Production Process Warehouse Electro Testing Lab
Temperature (oC) 15 -30 25 ± 2 23 ± 2 <0
Humidity Relative (%) < 70 < 70 < 70 -

7 APPENDIX

You might also like