Scribd Logo
Upload

Welcome to Scribd!

  • 37 views

    General Safety Guideline For Operators For Commissioning of The EOT Cranes

    Uploaded by

    Swapnil Mirajkar
    1. This document provides general safety guidelines for crane operators during commissioning of EOT cranes. It lists 14 dos and 14 don'ts for safe crane operation. 2. The dos include wearing proper PPE, acquiring crane information, following signals and instructions, checking rigging and brakes before lifts, and informing maintenance of any abnormalities. 3. The don'ts prohibit unsafe behaviors like operating without a clear signal, lifting improperly balanced loads, using phones or reading during operation, and operating under the influence of drugs or alcohol.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    General Safety Guideline For Operators For Commissioning of The EOT Cranes

    Uploaded by

    Swapnil Mirajkar
    37 views2 pages
    1. This document provides general safety guidelines for crane operators during commissioning of EOT cranes. It lists 14 dos and 14 don'ts for safe crane operation. 2. The dos include wearing proper PPE, acquiring crane information, following signals and instructions, checking rigging and brakes before lifts, and informing maintenance of any abnormalities. 3. The don'ts prohibit unsafe behaviors like operating without a clear signal, lifting improperly balanced loads, using phones or reading during operation, and operating under the influence of drugs or alcohol.

    Original Title

    CRANE SAFETY

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This document provides general safety guidelines for crane operators during commissioning of EOT cranes. It lists 14 dos and 14 don'ts for safe crane operation. 2. The dos include wearing proper PPE, acquiring crane information, following signals and instructions, checking rigging and brakes before lifts, and informing maintenance of any abnormalities. 3. The don'ts prohibit unsafe behaviors like operating without a clear signal, lifting improperly balanced loads, using phones or reading during operation, and operating under the influence of drugs or alcohol.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    37 views2 pages

    General Safety Guideline For Operators For Commissioning of The EOT Cranes

    Uploaded by

    Swapnil Mirajkar
    1. This document provides general safety guidelines for crane operators during commissioning of EOT cranes. It lists 14 dos and 14 don'ts for safe crane operation. 2. The dos include wearing proper PPE, acquiring crane information, following signals and instructions, checking rigging and brakes before lifts, and informing maintenance of any abnormalities. 3. The don'ts prohibit unsafe behaviors like operating without a clear signal, lifting improperly balanced loads, using phones or reading during operation, and operating under the influence of drugs or alcohol.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    General Safety Guideline for operators for commissioning of the

    EOT Cranes.
    DO’S DON’TS
    1 Wear Safety Helmet, Safety shoe, 1 Don’t operate the crane if the signal
    Safety goggles, safety jackets, Safety is not clear or given by more than one
    belt (Where required) and other person.
    required PPEs before leaving the
    operator rest room for going to the
    crane

    2 Wear safety goggle in open type 2 Don’t operate unless the over hoist
    cabin limit switch is functioning.

    3 Acquire information about the crane 3 Don’t make oblique pull which
    shut down or break down. misalign rope with hoist.

    4 Know the standard hand signal. 4 Don’t lift unless load slings are
    centered on hook or load is properly
    balanced.

    5 Follow written instruction provided 5 Don’t move a load over people in the
    in the cabin (if any). shop floor.
    6 Pull all the controllers in ‘Zero’ while 6 Don’t create panic for any
    not in operation. abnormality of the crane, stop the
    crane and inform the ground crew.

    7 Put OFF individual hoist safety 7 Don’t use mobile phone; talk with
    switches which is not in operation. others, read newspaper and
    magazine during the crane operation.

    8 Ring the gong bell before starting 8 Don’t operate the crane if feel sick,
    the crane. feeling giddiness or high Blood
    pressure. Inform the ground crew.

    9 Watch proper rigging on load before 9 Don’t try to come out from the cabin
    lifting. during the power failure.

    10 Lift load a few inches and test hoist 10 Don’t leave operating position with
    brake before making complete lift. suspended load on hook.
    11 Move the crane knowing the ground 11 Don’t leave the crane before ensuring
    hazards or according to the signal on the control power is OFF and all
    the shop floor. controllers are in ‘Zero’ position.

    12 During L T movements ring the gong 12 Do not operate the crane by any
    bell if automatic bell is not working. other parts of the body. Operate the
    crane with the hands only.

    13 Inform the concern maintenance 13 Don’t operate the crane if under the
    agency immediately if any influence of alcohol or drugs
    abnormality noticed like heavy
    vibration, jerking, heavy noise, bad
    smell , visible damage , smoke etc.

    14 Check the emergency light(if 14 Do Not allow riders on loads or hooks.


    provided)

    You might also like