Worlde Easycontrol Midi Controller User'S Manual
Worlde Easycontrol Midi Controller User'S Manual
USER’S MANUAL
Contents
Introduction ....................................................................................................................................... 3
Features ........................................................................................................................................... 3
Parts and their functions .................................................................................................................. 4
Setup ................................................................................................................................................ 5
Making detailed settings................................................................................................................... 6
Global ........................................................................................................................................ 6
Knobs ........................................................................................................................................ 6
Sliders ....................................................................................................................................... 7
Assignable buttons .................................................................................................................... 7
Transport buttons ...................................................................................................................... 8
Specifications ................................................................................................................................... 9
Introduction
Thank you for purchasing the WORLDE EASYCONTROL USB controller. To help
you get the most out of your new instrument, please read this manual carefully.
In order to use the functions of this product, you’ll need to make settings
in the application you’re using. Make settings as described in the owner’s
manual for your application.
Features
11 assignable buttons.
by USB.
hot-plug supported.
Setup
Operating requirements
Apple Macintosh computer: computer with an Intel or PowerPC processor that has a USB port
and satisfies the requirements for running Mac OS X.
Operating system: Mac OS X 10.3.9, Mac OS X 10.4.7 or later.
Windows Computer: Computer that has a USB port and satisfied the requirements for running
Microsoft Windows10/8/7/XP/Vista (a USB chipset made by the Intel Corporation is
recommended).
Operating system: Microsoft Windows XP SP2 or later, or Microsoft Windows Vista SP1.
Connections and power: Connect the EASYCONTROL to your computer with a USB cable.
Making detailed settings
The following settings cannot be edited from the EASYCONTROL itself, so you’ll need to use the
EASYCONTROL software Editor. You can download the EASYCONTROL software Editor from
the website www.worlde.com.cn.
Global
Knobs
Operating a knob will transmit a control change message. You can enable/disable each knob,
specify its control change number, and specify the values transmitted when the knob is turned
fully left or fully right..
Knob Enable [Disable/Enable]
Enables or disables the knob. If you’ve disabled a knob, turning it will not transmit a MIDI
message.
CC Number [0...127]
Specifies the control change number of the control change message that is transmitted.
Left Value [0...127]
Specifies the value of the control change message transmitted when you turn the knob all the way
to the left.
Right Value [0...127]
Specifies the value of the control change message transmitted when you turn the knob all the way
to the right.
Sliders
Operating a slider will transmit a control change message. You can enable/disable each slider,
specify its control change number, and specify the values transmitted when the slider is moved
fully upward or fully downward.
Slider Enable [Disable/Enable]
Enables or disables the slider. If you’ve disabled a slider, moving it will not transmit a MIDI
message.
CC Number [0...127]
Specifies the control change number of the control change message that is transmitted.
Upper Value [0...127]
Specifies the value of the control change message transmitted when you move the slider all the
way upward.
Lower Value [0...127]
Specifies the value of the control change message transmitted when you move the slider all the
way downward.
Assignable buttons
The button transmits a control change message. You can choose whether this button will be
enabled, the type of button operation, the control change number, and the values that will be
transmitted when the button is pressed. These MIDI messages are transmitted on the Global MIDI
Channel.
Assign Type [No Assign/Note/Control Change]
This specifies the type of message that will be assigned to the button. You can disable the button
(no assignment), or assign a note message or a control change.
Button Behavior [Momentary/Toggle]
Selects one of the following two modes:
Momentary: Pressing the button will send a control change message with the On value, releasing
the button will send a control change message with the Off value.
Toggle: Each time that you press the button, the control change message will alternate between
the On value and the Off value.
Note Number [C-1...G9]
This specifies the note number of the note message that is transmitted.
CC Number [0...127]
Specifies the CC number of the control change message that will be transmitted.
On Value [0...127]
Specifies the On value of the control change or note on message.
Off Value [0...127]
Specifies the Off value of the control change message. You can set this only if the assign type is
“Control Change.”
Transport buttons
Operating the transport buttons will transmit either control change messages or MMC messages,
depending on the assign type. For each of these six buttons, you can specify the message that is
assigned, the way in which the button will operate when pressed, the control change number, or
an MMC command.
Assign Type [Control Change/MMC/No Assign]
Specifies the type of message assigned to the transport button. You can specify that the button be
disabled, or assign a control change message or MMC message.
Button Behavior [Momentary/Toggle]
Selects one of two types of behavior for the button:
Momentary: A control change message with a value of 127 will be transmitted when you press
the transport button, and with a value of 0 when you release the button.
Toggle : Each time you press the transport button, a control change message with a value of 127
or 0 will be transmitted alternately. You can’t specify the button behavior if the assign type is
“MMC.” If you’ve specified “MMC,” an MMC command will be transmitted each time you press the
button.
CC Number [0...127]
Specifies the control change number of the control change message that is transmitted.
MMC Command [Stop/Play .../MMC Reset]
Selects one of the following thirteen types of MMC command as the MMC message that will be
transmitted. Stop, Play, Deferred Play, Fast Forward, Rewind, Record Strobe, Record Exit,
Record Pause, Pause, Eject, Chase, Command Error Reset, MMC Reset.
MMC Device ID [0...127]
Specifies the device ID of the MMC message. Normally you will specify 127. If the device ID is 127,
all devices will receive the MMC message.
Specifications
Connectors: USB connector (mini B type)
Power supply: USB bus power mode
Current consumption: 100 mA or less
Dimensions (W x D x H): 13.6 x 3.9 x 0.8 inches / 345 x 100 x 20 mm
Weight: 15.3 oz / 435 g
Included items: USB cable, Owner’s manual
* Specifications and appearance are subject to change without notice.