Scribd
Upload
32 views6 pages

Task 1 Wireless Security

The document discusses setting up the security of a wireless network, including changing the SSID and IP address, setting the IP range, choosing the WPA2 security protocol, enabling MAC address filtering to allow specific devices, and checking that unauthorized MAC addresses are denied access.

Uploaded by

goku
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
32 views6 pages

Task 1 Wireless Security

The document discusses setting up the security of a wireless network, including changing the SSID and IP address, setting the IP range, choosing the WPA2 security protocol, enabling MAC address filtering to allow specific devices, and checking that unauthorized MAC addresses are denied access.

Uploaded by

goku
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Task 1

Wireless Security

Firstly, we’re going to enter the wireless router.


And then change the SSID: (wathone)

Next step is changing the own ip address and subnet mask to given.
This is new ip address.

We set up the ip range 15 to 20.


We are going to choose the best protocol which is WPA2. Because it must be
secure network.

Using MAC address filtering rules: choose “allow”.


Click the enable SSID broadcast box.

We must connect with our phone and check the MAC Address.
Copy the MAC Address fill up with it box.

If we use another MAC address which is not include in allow list , It will be
access denied network.

You might also like