N2 (IG-100) GAS FIRE SUPPRESSION SYSTEMS

Cer
EN 12094-4
. 724a
π

NFPA 2001 : Standard

on Clean Agent
Fire Extinguishing System
2 TECHNOLOGY OVERVIEW

PRESSURE REGULATOR TECHNOLOGY

Rotarex Pressure Regulators modulate the discharge pressure to a constant

40-60 bar which still delivers the design concentration within 60 seconds,

BETTER SAFETY:
- Prevents discharge freeze-up
- Prevents explosive force of discharge

SAVES TIME AND MONEY:

- Enables low pressure manifolds & pipework to be used - that are lower
cost and easy to install
-
protected space

EASY MAINTENANCE:
- After a system discharge, simply remove the regulator, recharge, and
reconnect. No reconditioning necessary
- Functional tests are possible even while the system is armed
Design software available
Pressure (bar)

Time (s) Cylinder pressure

Pressure at nozzle

SOFTWARE AVAILABILITY

14520, Vds 2380 and NFPA 2001.

ALL RIGHTS OF CHANGE RESERVED

3 CYLINDER/VALVE ASSEMBLIES

80L CYLINDER/VALVE ASSEMBLY FOR 300 BAR N2 GAS

High Pressure cylinder valves

cylinder/valve assembly.
- Empty 80L cylinder for Cer
EN 12094-4
. 724a
π for 300 bar inert

300 bar inert gases

- B0480 cylinder valve and
- steel protection cap KEY FEATURES

- Available in 300 bar versions

- Requires one of 4 actuator device options
- Special connections available on request

300 bar
Product code B04802007

PROVEN TECHNOLOGY

extinguishing systems as well as Ultra High Purity, Medical, Cryogenic,

Automotive and LPG applications. They leverage 90-year expertise,
vast R&D infrastructure and global scale to provide the most technically

Rotarex valves to perform when it most counts.

Rotarex recommends its high-performance Series B0480 valve technology for

200/300 bar inert gas systems. Over 200,000 valves are already in service.

300 bar
Product code B04808000

SPECIFICATIONS SPECIFICATIONS

Working pressure 300 bar versions Weight empty ≈ 103 Kg Working pressure 300 bar versions Inlet connection C = 25E EN-629-1
p max.
Seamless Steel Water volume 80l
Cylinder Length w/o cap 1760 ± 20mm Temperature range -20°C to +60°C Outlet connection

G IG 01, IG 55, IG 100, IG 541 Diameter 267 mm ± 1% 12 mm Dip tube connection G = M 16 x 1

Test pressure 450 bar Valve body Brass Standard burst disc p = 450 bar

ALL RIGHTS OF CHANGE RESERVED

4 PRESSURE REGULATORS AND ACTUATOR DEVICES

CONSTANT DISCHARGE PRESSURE REGULATOR

KEY FEATURES
Pressure Regulator to create
- Reduces discharge pressure to a pre-set pressure (60 bar)
discharge to prevent line - Attaches to the valve discharge port
freezing - Helps prevent blockage due to line freezing
- Helps reduce pressure blow-outs and venting
requirements
-
Mounts on B0480 valve
EN 12094-4
Cer . 724a

Product code B08400002

SPECIFICATIONS

Nominal inlet 300 bar Inlet connection Dynamic outlet see chart
pressure pressure

Max inlet pressure 360 bar Outlet connection* C = M30x2 Static outlet 60 bar
pressure
12 mm
Special thread options available on request

MANUAL RELEASE DEVICE

Device to actuate the release MANUAL/PNEUMATIC PNEUMATIC RELEASE
of extinguishing agent. MANUAL RELEASE DEVICE RELEASE DEVICE DEVICE -20 BAR

For use with Series B0480

valves.

- For manual actuation of the system - For both manual and - For pneumatic actuation
- Can be used with pneumatic actuation of the system
electromagnetic actuators - Can be used as master valve - Attaches to master valve via
with pneumatic connections to a pilot hose in a multiple
additional cylinders via a pilot hose cylinder configuration
Product code B04420100 B04420065 B04420066
Working pressure 300 bar 300 bar 300 bar
Valve connection M42 x 1,5 M42 x 1,5 M42 x 1,5
Pneumatic connection -
Actuation force/pressure 150N 20 bar for 300 bar sytems: p max = 340 20 bar for 300 bar sytems: p max = 340
15 bar for 200 bar systems: p max = 250 15 bar for 200 bar systems: p max = 250

ALL RIGHTS OF CHANGE RESERVED

5 ACTUATOR DEVICES

ELECTROMAGNETIC RELEASE DEVICE

KEY FEATURES
Device to electronically
actuate the release of - Most commonly used as a master valve to actuate the
extinguishing agent. system electronically, such as with connection to a
smoke or heat detection device
For use with Series B0480 - Electronically actuates the release of extinguishing
valves agent

Cer
EN 12094-4
. 724a
WITH DIODE AND WITHOUT DIODE WITH BLOCKING DEVICE

B04425131 B04425132 B04425129

WITH DIODE WITHOUT DIODE WITH BLOCKING DEVICE

Valve connection B = M42 x 1,5 B = M42 x 1,5 B = M42 x 1,5
Nominal voltage 24 VDC 24 VDC 24 VDC
Electrical connection PG 9
Nominal current 0,5 A 0,5 A 0,5 A
Protection Class IP65 IP65 IP65
Special thread options available on request
*Applies to versions B04425131 and B04425132
6 HOSES & CONNECTORS

PILOT HOSES

Hose to connect multiple 90° PILOT HOSE STRAIGHT PILOT HOSE

cylinders in a series.

Connects a master valve or a

pneumatic actuator with an
other pneumatic actuator ¼” ¼”
SW 19A/F SW 19A/F
60° 60°
Couple 20-25 Nm B Couple 20-25 Nm A1-A2 B
A

G ¼”
G ¼” G ¼”
¼” B
90° SW 19 A/F 400
60° ¼”
Couple 20-25 Nm SW 19 A/F
60°
Couple 20-25 Nm
B

G ¼”

- -
- 400 bar working pressure - 350 bar working pressure
- Adapter B must be ordered separately
(one for each hose end)
Product Length l Connection Bending Product Length l Connection Bending
code radius code radius
A B06920209 500 mm ¼” - BSP 75 mm A1 B06920211 400 mm ¼” - BSP 75 mm
Adapter B 026300304 with O-ring A2 B06920212 700 mm ¼” - BSP 75 mm
Adapter B 026300304 with O-ring
SPECIFICATIONS

Working pressure 400 bar Temperature Range -40°C to 100°C Interior diameter
Burst pressure 1600 bar
Material Synthetic rubber oil resistant Norm EN 857 2 SC
Torque 20-25 Nm

DISCHARGE HOSE

Hose to connect the cylinder ½” BSP Hose EN 853 2SN M30 x 2

SW 27 DN 16.0 350 bar SW 30
60° Couple38-42 Nm
Couple 38-42 Nm

350 bar working pressure.

Product code B06920208

340

SPECIFICATIONS

Working pressure 350 bar Material Synthetic rubber oil resistant Check valve ½” BSP
connection (outlet)
Burst pressure 1400 bar Norm EN 853 2 SN
Bending radius 180 mm
Temperature range -40°C to 100°C Length L 340 mm
Interior diameter ½”
Torque 38-42 Nm Valve connection M30x2
(inlet)

ALL RIGHTS OF CHANGE RESERVED

7 NOZZLES

DISCHARGE NOZZLES

KEY FEATURES
Brass discharge nozzles for
inert gas systems. - Max. working pressure 300 bar
- Material: brass
-

Size of thread Product code

B04611100 3
B04611101 4
B04611102 5
B04611103 6
½” BSP
B04611104 7
B04611105 8
B04611106 9
B04611107 10
B04611200 7
B04611201 8
B04611202 9
B04611203 10
¾” BSP
B04611204 11
B04611205 12
B04611206 13
B04611207 14
B04611300 10
B04611301 11
B04611302 12
B04611303 13
1” BSP B04611304 14
B04611305 15
B04611306 16
B04611307 17
B04611308 18
B04611400 15
B04611401 16
B04611402 17
B04611403 18
B04611404 19
B04611405 20
1 ½” BSP
B04611406 21
B04611407 22
B04611408 23
B04611409 24
B04611410 25
B04611411 26

ALL RIGHTS OF CHANGE RESERVED

8 DIRECTIONAL VALVES

DIRECTIONAL VALVE

KEY FEATURES
Valve and actuator assembly
to isolate separate protection - Choice of 4 diameters: 1” / 1½” / 2” / 3”
zones from the same cylinder - Actuates system discharge electronically or manually
rack.

Permits discharge only in the

1” 1 ½” 2” 3”
Product code B06300700 B06300701 B06300702 B06300703

VALVE SPECIFICATIONS ACTUATOR SPECIFICATIONS

Working Pressure 100 bar Voltage 12-24 V AC/DC

Type Ball valve 2 way Current 12 V DC/2.90A - 24 V DC/ 1.35A

Material Carbon Steel Operating time 90°/12 seconds no lead

Weight 1”: 3.45 Kg Max operating 35 Nm

1”½: 8.07 Kg torque
2”: 10.15 Kg
Working angle 90°
Valve and actuator available as separate component on request
Statut indicator LED

Output 2 micro switches and line end of

Protection Electronic over-torque protection /

valve jams
IP Rating IP 65
*VDS version available

"+<195<)&=D+=*-H'+čD5K!<D!=*+<L; 9
afŴ+:);E3E
/39/3): D
": +8#Ā +@D&7a`bd`
ļōŔŴ`bųcaif```ĮʼnŠŴ`bųcai`ec`
The Expert in Fire Protection System ĭŕʼnőŔĢŋŗŖŜʼnŋŜĨőŎōŴŋŗŴŜŐ
Ġ
ĿōŊśőŜōĢşşşŴőŎōŴŋŗŴŜŐŵşşşŴőŕŘōŚőʼnŔŴŋŗŴŜŐŵşşşŴŚŗŜʼnŚōŠŴŋŗŕ

ALL RIGHTS OF CHANGE RESERVED