Scribd
Upload
382 views9 pages

Computer Aided Drafting Final Quiz2

The document contains 20 multiple choice questions about dimensioning techniques in technical drawings. It covers topics like the proper placement of dimensions, different dimensioning systems, the purpose of different dimension types, leader lines, and conventions for dimensioning circles and other shapes. The questions test understanding of fundamental principles and best practices for dimensioning views in drawings.

Uploaded by

Russel Mendoza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
382 views9 pages

Computer Aided Drafting Final Quiz2

The document contains 20 multiple choice questions about dimensioning techniques in technical drawings. It covers topics like the proper placement of dimensions, different dimensioning systems, the purpose of different dimension types, leader lines, and conventions for dimensioning circles and other shapes. The questions test understanding of fundamental principles and best practices for dimensioning views in drawings.

Uploaded by

Russel Mendoza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Question 

1
Complete
Mark 1.00 out of 1.00

Flag question

Question text
The advised position of placement of the dimensions should be ______.

Select one:
a.
inside view

b.
on the boundaries of the view

c.
cutting the view

d.
outside th view

Question 2
Complete
Mark 1.00 out of 1.00

Flag question

Question text
Different units of measurement can be used in dimensioning a view.

Select one:
True
False

Question 3
Complete
Mark 1.00 out of 1.00
Flag question

Question text
Size or functional dimensions does not indicate thickness

Select one:
True
False

Question 4
Complete
Mark 1.00 out of 1.00

Flag question

Question text
In the combined dimension, the dimensions are arranged in a straight line only.

Select one:
True
False

Question 5
Complete
Mark 1.00 out of 1.00

Flag question

Question text
Dimensioning doesn’t represent material.

Select one:
True
False
Question 6
Complete
Mark 0.00 out of 1.00

Flag question

Question text
In which of the following type of dimensioning, the dimensions are arranged only in a
straight line?

Select one:
a.
aligned dimension

b.
combined dimension

c.
parallel dimension

d.
chain dimension

Question 7
Complete
Mark 1.00 out of 1.00

Flag question

Question text
In unidirectional system the dimensions are ______

Select one:
a.
Placed by breaking the dimension line in the middle

b.
Placed above the dimension lines
c.
Placed left side of the dimension line

d.
Placed below the dimension lines

Question 8
Complete
Mark 1.00 out of 1.00

Flag question

Question text
An outline or a centre line should be used as a dimension line.

Select one:
True
False

Question 9
Complete
Mark 1.00 out of 1.00

Flag question

Question text
Location and datum dimensions indicates diameter.

Select one:
True
False

Question 10
Complete
Mark 1.00 out of 1.00
Flag question

Question text
As far as possible, the dimension should be given to which of the following lines?

Select one:
a.
leader line

b.
hidden line

c.
outline

d.
center line

Question 11
Complete
Mark 1.00 out of 1.00

Flag question

Question text
Aligned system is used for drawing of air crafts, automobiles.

Select one:
True
False

Question 12
Complete
Mark 1.00 out of 1.00
Flag question

Question text
In chain dimension, the dimensions are arranged parallel to each other.

Select one:
True
False

Question 13
Complete
Mark 1.00 out of 1.00

Flag question

Question text
In dimensioning, the lines enclosing the dimension line are known as extension line.

Select one:
True
False

Question 14
Complete
Mark 1.00 out of 1.00

Flag question

Question text
It is recommended that a gap of about 2 mm should be kept between the extension line
and an outline.

Select one:
True
False

Question 15
Complete
Mark 1.00 out of 1.00

Flag question

Question text
In unidirectional system, the figures are written along the dimension line.

Select one:
True
False

Question 16
Complete
Mark 1.00 out of 1.00

Flag question

Question text
When dimensioning the circle, the dimension line begins from the center of the circle.

Select one:
True
False

Question 17
Complete
Mark 1.00 out of 1.00

Flag question

Question text
Which are the two systems of placing dimensions?
i. Aligned system, ii. Break system, iii. Unidirectional system, iv. Directional system

Select one:
a.
ii,iv

b.
i,iii

c.
i,ii

d.
i,iv

Question 18
Complete
Mark 1.00 out of 1.00

Flag question

Question text
A leader line can be drawn curved.

Select one:
True
False

Question 19
Complete
Mark 1.00 out of 1.00

Flag question

Question text
A dot may also be used to replace an arrowhead.

Select one:
True
False

Question 20
Complete
Mark 1.00 out of 1.00

Flag question

Question text
Two types of dimensions needed on a drawing are: i) size or functional dimensions and ii)
location or datum dimensions.

Select one:
True
False

You might also like