CKD SRL3

SRL3 Rodless cylinder
SCP*2
CMK2
CMA2
SCM
SCG
Rodless type SCA2
SCS
ø12·ø16·ø20·ø25·ø32·ø40 CKV2
ø50·ø63·ø80·ø100 CA/OV2
SSD
Overview CAT
MDC2
High load and long service life.
MVC
Rodless cylinder that can
SMD2
operate at high speeds. Ample MSD*
variation with sizes available FC*
from ø12 to ø100. STK
ULK*
Features JSK/M2
JSG
Flat cylinder
JSC3
Flat piston with a structure
USSD
that could take on the load.
USC
High load resistance and non- JSB3
rotating mechanism. LMB
Seal belt STG
STS L
Sealing performance increased
LCS
much longer to make the
LCG
sealing contact linear.
C O N T E N T S LCM
Magnet provided as standard LCT
Switches can be directly LCY
Series variation 1994
mounted on standard types. STR2
Variation and option selection table 1996
UCA2
High speed packing seal provided Safety precautions 1998 HCM
High speed resistant piston Double acting(SRL3) 2004 HCA
packing seal is used. SRL3
Double acting/resin guide(SRL3-G) 2018
SRG3
Common port Double acting/position locking(SRL3-Q) 2032 SRM3
Common port (one end Double acting/resin guide/position locking (SRL3-GQ) 2042 SRT3
porting), or standard port MRL2
SRL3 Series option dimensions 2048
(both ends porting) can be MRG2
Configurations table 2053
selected to accommodate SM-25
Double acting·full cowling type(SRL3-J) 2057
cylinder mounting position. CAC4
This contributes to downsizing Configurations table 2073 UCAC2
of devices. Selection guide 2074 RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
1993
Rodless cylinder SRL3 Series
Series variation SRL3 Series Series variation
SCP*2 SCP*2
CMK2 CMK2
CMA2 CMA2
SCM
: Standard : Option : Custom order Not available SCM
SCG Mounting style Cushion Option SCG
Custom stroke length

SCA2 SCA2
Basic type
Axial foot type
Axial foot type
Axial foot type
Both sides cushioned
R side cushioned
L side cushioned
No cushion
Adjustable full-stroke both sides with shock absorber
Adjustable full-stroke R side with shock absorber
Adjustable full-stroke L side with shock absorber
Adjustable full stroke bracket to be installed later
Floating joint
Thin floating joint
Intermediate support bracket 00
Intermediate support bracket LB1
C mount bracke
Table mounting thread size up
Height adjustment plate

Max. stroke length
Min. stroke length
Switch
Page
SCS SCS
CKV2 CKV2
CA/OV2 CA/OV2
SSD SSD
Variation Model no. Bore size Standard stroke length (mm)
CAT CAT
MDC2 MDC2
MVC JIS symbol (mm) MVC
SMD2 SMD2
MSD* MSD*
FC*
(mm) (mm) (mm) FC*
STK 200 300 400 500 600 700 800 900 1000 00 LB LB1 LJ B R L N A A1 A2 A3 Y Y1 L* N* C H U STK
ULK* ULK*
JSK/M2 SRL3 ø12, ø16, ø20 5000 JSK/M2
JSG JSG
ø25 5000
JSC3 JSC3
Double acting
USSD 1 5000 1 USSD
ø32 2004
USC standard type USC
JSB3 ø40, ø50, ø63 5000 JSB3
LMB LMB
STG ø80, ø100 5000 STG
STS L STS L
SRL3-G ø12, ø16, ø20 5000
LCS LCS
LCG LCG
ø25 5000
LCM Double acting LCM
LCT ø32 1 5000 1 2018 LCT
LCY resin guide type LCY
STR2 ø40, ø50, ø63 5000 STR2
UCA2 UCA2
ø80, ø100 5000
HCM HCM
HCA HCA
SRL3-Q ø12, ø16, ø20 5000
SRL3 SRL3
SRG3 ø25 5000 SRG3
SRM3 Double acting with SRM3
SRT3 ø32 1 5000 1 2032 SRT3
MRL2 position locking function MRL2
ø40, ø50, ø63 5000
MRG2 MRG2
SM-25 SM-25
ø80, ø100 5000
CAC4 CAC4
UCAC2 SRL3-GQ ø12, ø16, ø20 5000 UCAC2
RCC2 RCC2
MFC Double acting with ø25 5000 MFC
SHC SHC
position locking function ø32 1 5000 1 2042
GLC GLC
Ending Resin guide type ø40, ø50, ø63 5000 Ending
Rodless cylinder
Rodless type
ø80, ø100 5000
SRL3-J ø25 3000

Double acting
ø32 1 3000 1 2057
full cowling type
ø40, ø50, ø63 3000
1994 1995
SRL3 Series
SCP*2 Variation and option combination table
CMK2
: Standard
CMA2
SCM
: Option
SCG : Available (custom order)
SCA2 : Available depending on conditions (consult with CKD)
SCS : Not available
CKV2
Code Variation Port thread Option
CA/OV2
Double acting basic type

With resin guide
Position locking
Full cowling type
NPT
G
Adjustable stroke both sides

Adjustable stroke R side
Adjustable stroke H side
For mounting adjustable stroke bracket afterwards
Port/cushion needle position specification
SSD
CAT
MDC2
MVC
SMD2
Code
MSD*
FC*
STK
ULK*
JSK/M2
JSG
JSC3
USSD Symbol No G Q J N G A A1 A2 A3 H R B T D S X
USC Double acting basic type Blank
Variation
JSB3
With resin guide G
LMB
STG Position locking Q
STS L Full cowling type J
LCS
LCG
Port thread
LCM NPT N
LCT G G
LCY
STR2
UCA2 Adjustable stroke both sides A
Option
HCM Adjustable stroke R side A1

HCA
Adjustable stroke H side A2
SRL3
SRG3 For mounting adjustable stroke bracket afterwards A3
SRM3 Table mounting thread size up H
SRT3
Port/cushion needle position specification R
MRL2
MRG2 Port/cushion needle position specification B
SM-25 Port/cushion needle position specification T
CAC4
Port/cushion needle position specification D
UCAC2
RCC2 Port/cushion needle position specification S
MFC Port/cushion needle position specification X
SHC
Cylinder switch
Accessory
GLC
Ending Floating joint Y
Thin floating joint Y1 Note 1
Intermediate support bracket (00.LB) L
Intermediate support bracket (LB1) N
C mount C
With height adjustment plate U
Note 1: Size of ø25 or less with a " " are available. (custom order)
1996
SRL3 Series
Variation and option selection table
<Example of model number> SCP*2
CMK2
SRL3 G Q LB 20 B 200 M0H D A1 H CMA2
SCM
SCG
Model no. Mounting style C Piping
A E Stroke length G Switch quantity
SCA2
screw
type SCS
Variation B Tube D Cushion F Switch H Option CKV2
*Indicate symbols on the bore size model no. *Indicate symbols on the left table from left to right CA/OV2
left table from left to right
SSD
Model no.: rodless cylinder CAT
Variation: Resin guide type, position locking MDC2

A Mounting style : Axial foot type MVC
B SMD2
Bore size : ø20mm
C Port thread type
MSD*
: Rc thread
D Cushion
FC*
: Both sides cushioned
STK
E Stroke length : 200mm
ULK*
F Switch model no. : Reed MOH switch and lead wire 1m
JSK/M2
G Switch quantity : 2
JSG
H Option : Adjustable full-stroke both sides, shock absorber and table mounting thread size up
JSC3
USSD
USC
JSB3
LMB
STG
STS L
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
1997
Pneumatic components
Safety precautions
SCP*2 Always read this section before starting use.
CMK2 Refer to Intro 71 for cylinder, and Intro 78 for cylinder switch.
CMA2
SCM
SCG Individual precautions: rodless cylinder SRL3 Series
SCA2
SCS
CKV2 Design & Selection
CA/OV2
SSD With the slit rodless cylinder, such as the SRL3, ex-
1.Common
CAT ternal air leaks at a level that does not affect speed
MDC2 control.
MVC
CAUTION
Do not use for applications that require constant pres-
SMD2 Please watch out when designing intermediate stop circuit. surization to only one side such as a balancer.
MSD* With a slit rodless cylinder such as the SRL3, some air leaks
FC* due to the structure, so braking cannot be controlled with the
STK all ports closed 3-position valve, and it may not be possible to 2. Position locking type SRL3-Q
ULK* hold the table stop position. Use a double sided pressurized
JSK/M2 control circuit having a P/A/B connection 3-position valve. If air
pressure drops once and is then pressurized again unenergized,
CAUTION
JSG
JSC3 the table may move and the origin deviate. Cylinder load factor must be 50% or less. If the load
USSD factor is high, the lock may not be released or the
USC Basic circuit diagram lock section could be damaged.
JSB3 Horizontal load
LMB If piping is as shown in Fig. 1, equal pressure is applied on
both sides of the piston when stopped, and the table will not When operating with 500mm/s or more, entry speed
STG
pop out when restarting. of position locking mechanism should be 500mm/s
STS L
LCS
or less.
LCG Install an external shock absorber or deceleration cir-
LCM cuit, etc. to decelerate.
LCT
LCY
STR2
3. Full cowling type SRL3-J
UCA2
HCM CAUTION
HCA Do not use in an environment where it may contact
SRL3
welding spatters, etc. Use the full cowling type super
SRG3
rodless cylinder (SR3-J) in this case.
SRM3
SRT3
MRL2
Precautions for full cowling type (SRL3-J)
MRG2 Fig.1 When installing a wall to keep dirt or coolant away
SM-25
Vertical load from the device, be sure the wall is nonmagnetic (alu-
If a vertical load is applied as shown in Fig. 2, the table will move
CAC4 minum, brass, etc.).
in the direction of the load. Thus, install a regulator with check valve
UCAC2
to reduce the thrust in the load direction and balance the load. For a magnetic material (steel plate, etc.), separate
RCC2 the wall at least 20 mm from the switch edge.
MFC (all bore sizes)
SHC
GLC
Ending
Cylinder
Switch
20mm and over
Fig.2
1998
SRL3 Series
Specific precautions
Installation & Adjustment SCP*2
CMK2
CMA2
1. Common
SCM
SCG
WARNING SCA2
How to adjust stroke adjustment unit SCS
CKV2
CA/OV2
SSD
Adaptor Adaptor
Adjustable stroke plate
fixing bolt fixing bolt CAT
fixing bolt
Shock absorber Shock absorber MDC2
Adjustable stroke plate square nut
Stopper bolt square nut MVC
Shock absorber
Stopper bolt square nut Shock absorber
square nut
Shock absorber SMD2
Shock absorber Adaptor Adaptor MSD*
Adaptor
Stopper bolt Stopper bolt FC*
fixing bolt
square nut square nut
Adaptor
STK
Stopper bolt Stopper bolt
ø12 to ø25 ULK*
ø32 to ø63 ø80 to ø100
JSK/M2
JSG
JSC3
(1) Moving the stroke adjustment unit Table 2 Tightening torque of stopper bolt fixing nut, shock absorber fixing nut USSD
The stroke adjustment unit is moved by loosening the adapter Tightening torque Square nut Square nut USC
fixing bolt (adapter fixing bolt and stroke adjustment plate fix- Model (N/cm) (N/cm) JSB3
ing bolt for 12 to 25 mm bore). SRL3-12/16 110 to 120 130 to 180
LMB
(2) Fixing the stroke adjustment unit SRL3-20 250 to 270 290 to 390
SRL3-25 880 to 950 450 to 600 STG
After moving the stroke adjustment unit to the required posi-
tion, tighten and fix the adapter fixing bolt (adapter fixing bolt SRL3-32 2200 to 2400 750 to 1000 STS L
SRL3-40 4400 to 4800 2200 to 3000 LCS
and stroke adjustment plate fixing bolt for 12 to 25 mm bore)
SRL3-50 7700 to 8300 5500 to 7000
using values in Table 8. If tightened at a lower value, the stroke LCG
SRL3-63 20000 to 21600 5500 to 7000
adjustment unit may deviate. SRL3-80/100
LCM
21500 to 23500 10000 to 13000
LCT
Table 1 Tightening torque for adapter fixing bolt and stroke adjustment plate fixing bolt (5)Precautions upon use
Adjustable stroke plate
LCY
Tightening torque Adaptor fixing bolt The shock absorber absorbs rated energy with the rated
Fixing bolt STR2
Model (N/cm) (N/cm)
stroke. When the product is shipped, the shock absorber is UCA2
SRL3-12/16 100 to 120
50 to 70 installed with a slight margin to the stroke at the cylinder stroke
SRL3-20 250 to 270 HCM
SRL3-25 520 to 560 250 to 270 limit.
HCA
SRL3-32 2200 to 2400 – Absorbed energy is smaller than allowable energy absorp-
SRL3
SRL3-40 4400 to 4800 – tion for the individual shock absorber, so if rated absorbed en-
SRG3
SRL3-50/63 7700 to 8300 – ergy is required, adjust so the full stroke for the shock absorber
SRL3-80/100 10000 to 11000 – is used. SRM3
SRT3
(3)Stroke adjustment using stopper bolt
Slight margin Adjust the position of the MRL2
{ }
With 12 to 20mm bore, clearance between the table and at shock absorber shock absorber until
stroke.
the rod end touches it. MRG2
stroke adjustment plate is small, and fingers may be pinched
SM-25
during adjustment. The stroke must basically be adjusted (note) This is a description
of the shock absorber CAC4
by moving the stroke adjustment unit. Cylinder stroke
Cylinder stroke
end
included in the full stroke adjustment type.
UCAC2
end
Loosen the stopper bolt lock nut, turn the stopper bolt, and
RCC2
adjust the stroke.
Allowable energy absorption differs with collision speed, so if colli- MFC
After adjusting the stroke, tighten and fix the stopper bolt lock
sion speed is 2000 mm/s, check that one-third of the maximum energy SHC
nut using values in Table 2.
absorption in Table 3 is not exceeded. If collision speed is 1000 mm/s, GLC
(4) Adjusting shock absorber
check that one-half of the maximum energy absorption is not exceeded.
Shock absorber absorbed energy is adjusted by changing the Ending
working stroke of the shock absorber. Table 3 Adjustable full-stroke shock absorber specifications (initial setpoint)
Rodless cylinder
Rodless type
Adjust the shock absorber working stroke by loosening the Type type Absorbed energy (J) Valid mm stroke (mm)
shock absorber lock nut and turning the shock absorber. After SRL3-12/16 2.4 5.5
adjusting, tighten the shock absorber fixing nut with the tight- SRL3-20 5.7 7
SRL3-25 10 9
ening torque shown below.
SRL3-32 18 13
SRL3-40 50 16.5
SRL3-50/63 86 21
SRL3-80/100 143 25
1999
SRL3 Series
SCP*2 CAUTION Piping port position and operating direction
Avoid electrical welding after installing the rodless Bore size ø12 to 20.
CMK2
CMA2 cylinder. Option symbol (Blank, R, B, T)
L2 L2 L3 L3
SCM If the current flows into the cylinder and generates sparks be-
L1
SCG tween the dust-proof belt and cylinder tube, the dust-proof belt L1
SCA2 may be damaged. R1

R1
SCS
L0 L0 R0 R0
CKV2 If a unit with excessive inertia, etc., is moved, the
CA/OV2 cylinder may be damaged or faulty operation occur. L side R side
L0 R0
SSD Use only within the allowable range.
CAT R indicates R side pressurized port and L indicates L side pressurized
MDC2 port. Before shipping, all ports other than 1 each at R and L are sealed
Do not apply shock or excessive moment on the table.
MVC with plugs. Piping to other ports becomes possible by removing plug.
SMD2 Option symbol (D, S) are not available.
MSD*
Align before connecting to an load with an external
FC* guide mechanism. Bore size ø25 to ø63.
STK Carefully consider connection (floating) so deviation is
Option symbol (Blank, R, B, T)
ULK*
absorbed.The longer the stroke, the greater the shaft center
L1
may deviate. L1
JSK/M2
R1 R1
JSG
JSC3
Check that moment, including inertia generated when moving L0 L0 R0
R0
USSD or stopping the load, does not exceed the allowable load, or
L side R side
USC damage may result. Exceeding this value will result in damage.
L0 R0
JSB3 (When the overhang is large)
LMB If overhang is large and the cylinder is stopped at both ends R indicates R side pressurized port and L indicates L side pressur-
STG with the piston, the bending moment functions due to load ized port. Before shipping, all ports other than 1 each at R and L
STS L inertia even within internal cushion energy absorption. are sealed with plugs. Piping to other ports becomes possible by
LCS If kinetic energy is large and an external cushion, etc., is used, removing plug. However, bottom side piping is not possible. Select
LCG try contact with the work-piece center of gravity when possible. options (D, S) if such connection is necessary.
LCM
(When using an external stopper) For option symbols (D, S) (bottom piping)
LCT
When selecting an external stopper, consider the bending
LCY
moment generated by cylinder thrust.
STR2
Moment that functions when stopping with external stopper L2 R2
UCA2
HCM
F
HCA
SRL3 L side R side
SRG3 F : Cylinder thrust

SRM3 : Distance from cylinder L2 R2
center to stopper
SRT3 M1=F/
MRL2
R indicates R side pressurized port and L indicates L side pressurized port.
MRG2 (When using an external guide)
L There are no ports other than R2 or L2 , so pipes cannot be connected.
SM-25 When an external guide is installed, if the center is not aligned,
CAC4 movement is not smooth and resistance caused by twisting
UCAC2 functions as moment.
RCC2 Example of guide use
MFC
SHC
GLC
Ending
2000
SRL3 Series
Bore size ø80 and 100.
2. Position locking type SRL3-Q SCP*2
Option symbol (Blank, R, B, T) CMK2
WARNING CMA2
R1 R1 SCM
L2
How to adjust stroke adjustment unit SCG
L2 SCA2
L0 L0 L1 R0 R0 L1 SCS
Position locking unit
CKV2
L side L0 R0 R side
L1
CA/OV2
SSD
CAT
Adaptor MDC2
Lock pin MVC
Adaptor
Fixing bolt SMD2
MSD*
R indicates R side pressurized port and L indicates L side pressurized FC*
port. Before shipping, all ports other than 1 each at R and L are sealed STK
with plugs. Piping to other ports becomes possible by removing plug. Position locking unit can be moved by loosening the adaptor ULK*
fixing bolt. JSK/M2
Select shock absorber (A, A1, A2) in this case. If the stroke is JSG
For option symbols (D, S) (bottom piping)
finely adjusted with the shock absorber, the position locking JSC3
unit deviates and the position cannot be completely locked. USSD
Finely adjust stroke with the adapter fixing bolt. USC
R2 After moving to the required position, tighten and fix the JSB3
adapter fixing bolt using the values below. The position lock- LMB
L3
ing unit may deviate if the bolt is not tightened to these val- STG
ues. STS L
Check that the locking mechanism works when a load is set. LCS
L side R side
LCG
L3 R2 LCM
Adaptor fixing bolt tightening torque
Model LCT
(N•cm)
L3
SRL3-Q-12/16 100 to 120 LCY
R2
SRL3-Q-20 250 to 280 STR2
SRL3-Q-25 520 to 560 UCA2
SRL3-Q-32 2200 to 2400
HCM
SRL3-Q-40 4400 to 4800
SRL3-Q-50/63 7700 to 8300
HCA
There are no ports other than R2 or L3 , so pipes cannot be connected.
SRL3-Q-80/100 10000 to 11000 SRL3
SRG3
SRM3
Piping
CKD shock absorbers are consumables. Piping is required for the position locking unit.
SRT3
Replace the shock absorber if energy absorption MRL2
Port R
MRG2
performance drops or if movement is no longer Position locking unit port
SM-25
smooth.
CAC4
UCAC2
Mount the switch in parallel to the mounting groove RCC2
so that force is not applied on the lead wires. Load MFC
SHC
GLC
Ending
Install on parallel
Rodless cylinder
Rodless type
Port L (side without locking mechanism)
Branch pipe to the rodless cylinder R side using a tee union,

etc., and pipe to the position locking unit with similar piping.
Cylinder switch
If the piping on the side where the locking mechanism is pro-
vided is long and thin, or if the speed controller is separated
Cylinder
from the cylinder port, the exhaust speed will drop and it may
take longer for the lock to be applied. This may also occur if
the silencer on the valve's EXH port is clogged.
Supply pressure above the minimum working pres-

sure to the position locking unit port.
2001
SRL3 Series
Unlocking manually
SCP*2
Release the position locking pin with a rod-shaped object.
3. Full cowling type SRL3-J
CMK2
Supply pressure to port L to check that load is not applied to
CMA2
the locking mechanism before releasing the lock. CAUTION
SCM If both ports R and L are exhausted and pressure is supplied
SCG
Take care not to catch hands or fingers when adjust-
to port R while the piston is locked, the lock is released and
SCA2 the table may suddenly move, creating a hazard.
ing the switch.
SCS
CKV2 Avoid installing in reverse. Dirt may accumulate or
CA/OV2 operation be inhibited by accumulated fluid.
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC* Lock pin
STK
ULK*
JSK/M2
JSG
JSC3
USSD
USC Valves
JSB3 If the cylinder is held while pressure is applied on the locking
LMB mechanism, the locking pin may dislocate and cause dan-
STG ger. Do not use a 3-position closed center or P/A/B connec-
STS L tion valve.
LCS If back pressure is applied while locked, the lock may be
LCG released. Use a discrete valve, or use an individual exhaust
LCM manifold.
LCT
Dropping speed is increased with a quick exhaust valve, the
cylinder may move faster than the locking pin and prevent
LCY
proper release.
STR2
Do not use quick exhaust valves for position locking cylin-
UCA2
ders.
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
2002
SRL3 Series
During Use & Maintenance SCP*2
CMK2
1. Position locking type SRL3-Q 2. Full cowling type SRL3-J CMA2
SCM
CAUTION SCG
WARNING
SCA2
For safety purposes, prevent the load from dropping Suspended particles such as fiber, feathers, or pow- SCS
under its own weight during maintenance. der may pass through the table adapter passage un- CKV2
der the cover and adhere to the cylinder, leading to CA/OV2
When using the cylinder with air cushion, if the air operation faults. SSD
CAT
cushion needle on the lock mechanism side is too
MDC2
tight, the piston could bounce at the stroke end caus- If coolant (oil) or cutting chips scatter with force, or if
MVC
ing the lock lever and lock pin to collide and damage they scatter from an inclined direction, provide an-
SMD2
the locking mechanism. If the air cushion needle is other cover on the cylinder and sides, etc. MSD*
opened too far, the piston could spring back at the FC*
stroke end and cause similar damage. Adjust the air Do not let particles get stuck in the clearance of 2 to STK
cushion needle so that the piston does not bounce. 3mm between the sliding section(table adaptor) and ULK*
When stopping with an external shock absorber, etc., the cover. JSK/M2
adjust in the same way to prevent bouncing. JSG

JSC3
Regularly (once or twice a year) check that the hold- Regularly remove particles on top of the cover and inside the
USSD
ing section is not damaged by this symptom. cover. The product may be damaged if this is left as is.
USC
This product provides clearance under the cover for passing JSB3
the table adapter through. Therefore, there is a risk of par- LMB
CAUTION ticles entering the cover. STG
STS L
If the locking mechanism has been manually oper- LCS
ated, check and then return it manually to the origi- LCG
nal position.Do not use a manual override except LCM
during adjustment. LCT
LCY
STR2
Release the lock when installing or adjusting the cyl-
UCA2
inder. The lock could be damaged if the cylinder is
HCM
installed while the lock is applied. HCA
SRL3
Do not use multiple cylinders synchronized. Do not SRG3
move more than one workpiece using more than two <Simplified view of entry path> SRM3
cylinders with position locking mechanism simulta- SRT3
neously. One of the cylinders may become unable to MRL2
Do not get on the cover. It could break. MRG2
unlock.
SM-25
CAC4
Use the speed control valve with meter-out control. UCAC2
Locks may not be released during meter-in control. RCC2
MFC
Always use up to the stroke end of the side with the SHC
lock. If the cylinder's piston does not reach the stroke GLC
end, the lock may not be applied or may not be re- Ending
leased.
Rodless cylinder
Rodless type
Apply grease to sliding section of lock lever periodi-

cally.
2003
Rodless cylinder
SCP*2
SRL3 Series
CMK2
Bore size : ø12, ø16, ø20, ø25, ø32
CMA2 ø40, ø50, ø63, ø80, ø100
SCM JIS symbol
SCG
SCA2
SCS
CKV2
Specifications
Descriptions SRL3
CA/OV2
Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
SSD
Actuation Double acting
CAT
Working fluid Compressed air
MDC2
Max. working pressure MPa 0.7
MVC
Min. working pressure MPa 0.2 0.1 0.05
SMD2 1.05
Withstanding pressure MPa
MSD* Ambient temperature 5 to 60
FC* Port size M5 Rc1/8 Rc1/4 Rc3/8 Rc1/2
STK Stroke tolerance mm + 2.0
0 (up to 1000), + 2.5
0 (up to 3000), + 3.0
0 (up to 5000)
ULK* Working piston speed mm/s 50 to 2000 (standard port piping) (note 1)
JSK/M2 Cushion Air cushion
JSG Lubrication Not required (continuously lubricate using turbine oil class 1 ISOVG32 if lubricated.)
JSC3 Note 1: Piston speed used with common port piping differs depending on the stroke. Contact CKD for details.
USSD
Allowable energy absorption Stroke length
USC
Bore size Cushioned No cushion With shock absorber (initial setpoint) Bore size Standard stroke length Max. stroke length Min. stroke length
JSB3 (mm) Allowable energy absorption (J) Cushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm) (mm) (mm) (mm) (mm)
LMB
ø12 0.03 14.5 0.003 2.4 5.5 ø12
STG
ø16 0.22 19.2 0.007 2.4 5.5 ø16
STS L
ø20 0.59 22.2 0.010 5.7 7 ø20
LCS 200,300
ø25 1.40 20.9 0.015 10 9 ø25
LCG 400,500
ø32 2.57 23.5 0.030 18 13 ø32
LCM 600,700 5000 1
ø40 4.27 23.9 0.050 50 16.5 ø40
LCT 800,900
ø50 9.13 24.9 0.072 86 21 ø50
LCY 1000
ø63 17.4 29.6 0.138 86 21 ø63
STR2
ø80 40 45.8 0.393 143 25 ø80
UCA2
ø100 67 45.8 0.622 143 25 ø100
HCM
** The intermediate stroke can be manufactured in 1 mm increments.
HCA
SRL3 M type switch quantity and min. stroke length (mm)
SRG3 Switch quantity 1 2 3 4 5 6
SRM3 Switch model no.
M*V M*H M*V M*H M*V M*H M*V M*H M*V M*H M*V M*H
Bore size (mm)
SRT3
ø12 10 10 30 45(70) 60 90(120) 90 135(170) 120 180(220) 150 225(270)
MRL2 ø16 10 10 30 45(70) 60 90(120) 90 135(170) 120 180(220) 150 225(270)
MRG2 ø20 10 10 30 45(70) 60 90(120) 90 135(170) 120 180(220) 150 225(270)
SM-25 ø25 10 10 30 45(70) 60 90(120) 90 135(170) 120 180(220) 150 225(270)
CAC4 ø32 10 10 30 45 60 90 90 135 120 180 150 225
ø40 10 10 30 45 60 90 90 135 120 180 150 225
UCAC2
ø50 15 15 30 45 60 90 90 135 120 180 150 225
RCC2 ø63 15 15 30 45 60 90 90 135 120 180 150 225
MFC ø80 25 50 100 150 200 250
SHC ø100 25 50 100 150 200 250
GLC Note: The minimal stroke for full stroke adjustment models with switches are shown in ( ).
Ending T type switch quantity and min. stroke length (mm)

Switch quantity 1 2 3 4 5 6
Switch model no.
T*V T*H T*V T*H T*V T*H T*V T*H T*V T*H T*V T*H
Bore size (mm)
ø12 5 5 45 50(70) 85 100(120) 125 150(170) 165 200(220) 205 250(270)
ø16 5 5 45 50(70) 85 100(120) 125 150(170) 165 200(220) 205 250(270)
ø20 5 5 45 50(70) 85 100(120) 125 150(170) 165 200(220) 205 250(270)
ø25 10 10 45 50(70) 85 100(120) 125 150(170) 165 200(220) 205 250(270)
ø32 10 10 45 50 85 100 125 150 165 200 205 250
ø40 10 10 45 50 85 100 125 150 165 200 205 250
ø50 10 10 45 50 85 100 125 150 165 200 205 250
ø63 10 10 45 50 85 100 125 150 165 200 205 250
ø80 15 15 45 50 85 100 125 150 165 200 205 250
ø100 15 15 45 50 85 100 125 150 165 200 205 250
Note: The minimal stroke for full stroke adjustment models with switches are shown in ( ).
2004
SRL3 Series
Specifications
Switch specifications (M type switch) SCP*2
(1) 1color /2 color display CMK2
Proximity 2 wire Proximity 3 wire CMA2
Descriptions M2WV M3PH/M3PV
M2V and M2H M3H/M3V M3WV SCM
(2 color indicator type) (Custom order)
SCG
Applications PLC PLC, relay, IC circuit or small solenoid valve
SCA2
Output method – NPN output PNP output NPN output
Power voltage – 4.5 to 28 VDC 10 to 28 VDC SCS
Load voltage 10 to 30 VDC 30 VDC or less CKV2
Load current 5 to 30mA 200mA or less 100mA or less 150mA or less CA/OV2
Light LED (ON lighting) Red/green LED (ON lighting) LED (ON lighting) Yellow LED (ON lighting) Red/green LED (ON lighting) SSD
Leakage current 1mA or less 10µA or less 0.05mA or less 10µA or less CAT
Reed 2 wire MDC2
Descriptions
M0V and M0H M5V and M5H MVC
Applications PLC, relay PLC, relay, IC circuit (w/o lamp), serial connection SMD2
Power voltage – –
MSD*
Load voltage 12/24 VDC 110 VAC 5/12/24 VDC 110 VAC or less
FC*
Load current 5 to 50mA 7 to 20mA 50mA or less 20mA or less
STK
Light LED (ON lighting) Without indicator light
Leakage current ULK*
0mA
Note 1: For M0* switch, if load current is within 7 to 20mA, this switch can be used with 24 VAC and 48 VAC.
JSK/M2
Note 2: Refer to Ending 1 for specifications of other switches. JSG
JSC3
Switch specifications (T type switch) USSD
2 Color indicator type USC
Proximity 2 wire Proximity 3 wire JSB3
Descriptions
T2YH/T2YV T2WH/T2WV T3YH/T3YV T3WH/T3WV LMB
Applications PLC PLC, relay
STG
Output method – NPN output NPN output
STS L
Power voltage – 10 to 28 VDC
LCS
Load voltage 10 to 30 VDC 24 VDC ±10% 30 VDC or less
Load current 5 to 20mA 50mA or less LCG
Red/green Red/green Red/green Red/green LCM
Light LED LED LED LED LCT
(ON lighting) (ON lighting) (ON lighting) (ON lighting) LCY
Leakage current 1mA or less 10µA or less STR2
UCA2
HCM
Strong magnetic field proof
HCA
Proximity switch
Descriptions SRL3
T2YD and T2YDT
SRG3
Applications PLC
SRM3
Light Red/green LED (ON lighting)
SRT3
Load voltage 24 VDC ±10%
MRL2
Load current 5 to 20mA
MRG2
Internal voltage drop 6V or less
Leakage current 1.0mA or less SM-25
CAC4
UCAC2
Cylinder weight Unit: kg RCC2
Weight when stroke length is 0mm Additional MFC
Bore size (mm) Basic type Foot type Weight per switch weight per SHC
(00) (LB) (LB1) (Including bracket) St=100mm GLC
ø12 0.24 0.25 0.26 0.10 Ending
ø16 0.32 0.33 0.35 0.13
Rodless cylinder
Rodless type
ø20 0.52 0.54 0.58 0.18

ø25 1.0 1.1 1.1 0.28
ø32 1.5 1.6 1.7 0.36
0.02
ø40 2.4 2.5 – 0.53
ø50 3.5 3.6 – 0.75
ø63 6.1 6.4 – 1.11
ø80 18.4 19.0 – 2.32
ø100 26.2 27.2 – 3.38
2005
SRL3 Series
SCP*2 How to order Symbol Descriptions
Without switch A Mounting style
CMK2
CMA2 SRL3 00 12 B 200 B 00 Basic type
With switch LB Axial foot type
SCM
LB1 Axial foot type
SCG SRL3 00 12 B 200 M0H R B B Bore size (mm)
SCA2
12 ø12
SCS 16 ø16
CKV2 A Mounting style 20 ø20
Note 1
CA/OV2 25 ø25
B Bore size 32 ø32
SSD
40 ø40
CAT 50 ø50
MDC2 63 ø63
MVC 80 ø80
SMD2 100 ø100
C Port thread type
MSD* C Port thread type
Blank Rc thread
FC*
N NPT thread (ø20 and over) (custom order)
STK G G thread (ø20 and over) (custom order)
ULK* D Cushion
JSK/M2 D Cushion Both sides cushioned
B
JSG R R side cushioned
JSC3 L L side cushioned
N No cushion
USSD
E Stroke length (mm)
USC E Stroke length Bore size Stroke length Note 2 Custom stroke length
JSB3 ø12 to ø100 1 to 5000 By 1 mm increment
LMB F Switch model no.
Contact Reed
STG F Switch model no. Lead wire Lead wire Lead
Note 3 Indicator
STS L Axial Radial wire
LCS M0H* M0V* 1 color indicator type 2-wire
LCG M5H* M5V* Without indicator light
M2H* M2V* 1 color indicator type
LCM
– M2WV* 2 color indicator type 2-wire
LCT M3H* M3V* 1 color indicator type
LCY Note on model no. selection – M3WV*
Proximity
2 color indicator type 3-wire
STR2 Note 1: When bore size 12, 16, 20, 25, 32 and option symbol M3PH* M3PV* 1 color indicator type (custom order) 3-wire
"R" and "T" is selected,mounting style will be "00" T2WH* T2WV*
UCA2 or "LB1". 2-wire
T2YH* T2YV* 2 color indicator type
HCM (Mounting style "LB" is not available for option T3WH* T3WV*
HCA symbol "R" and "T" because it can not be piped ) 3-wire
T3YH* T3YV*
Note 2: Refer to page 2004 for minimum stroke with switch.
SRL3 Note 3: Switches not listed on option "F" are also available.
T2YD* – Strong magnetic field proof
2-wire
SRG3 Refer to Ending 1 for more details (custom order) T2YDT* – (AC magnetic field dedicated)
Note 4: The "*" mark on L* and N* indicates the quantity of *Lead wire length
SRM3 Blank 1m (standard)
sets. If 2 sets are required, fill in "L2" for LB and
SRT3 "N2" for LB1. 2 pcs./set 3 3m (option)
MRL2 Note 5: Refer to dimensions on page 2026 to 2031for port, 5 5m (option)
cushion needle position indication symbol.
MRG2 G Switch quantity
Note 6: Standard models of ø12 to ø15 needs to have their G Switch quantity
SM-25 cover removed and full stroke adjustment mounted R One on R side
using a plate nut afterwards. L One on L side
CAC4
"A3" is a option that will have a plate nut for mounting D 2
UCAC2 installed beforehand so that it can be mounted T 3
RCC2 afterwards without removing the cover. 4 4 pieces (fill in switch quantity if 4 or more switches are required.)
MFC Note 7: Thread size will be M4 for ø12 and ø16, and thread
size will be M5 for ø20 when "H" is selected.
H Option
Bore size (ø)
SHC H Option Bore size(ø) 12 16 20 25 32 40 50 63 80 100
Note 8: Refer to "Optional combination table" on the
Note 4, Note 5 A Adjustable full-stroke both sides with shock absorber
GLC following page for available combinations.
Note 6, Note 7
Note 9: Copper and PTFE free as standard. A1 Adjustable full-stroke R end only, with shock absorber
Ending Note 8
A2 Adjustable full-stroke L end only, with shock absorber
<Example of model number> A3 Adjustable full-stroke bracket (user installation)
Y Floating joint
SRL3-00-12B-200-M0H-R-B Y1 Thin floating joint
Model: Rodless cylinder L* Intermediate support bracket (00, LB)
N* With intermediate support bracket (LB1)
A Mounting style : Basic type C C mount bracket
B Bore size : ø12mm H Table mounting thread size up
C Port thread type : Rc thread U Height adjustment plate
Blank F (standard) F (standard)
Cushion needle position
D Cushion : Both sides cushioned

R
Port position
E Stroke length : 200mm R (common port) F

B F B
F Switch model no. : Reed switch M0H and lead wire 1m
T R (common port) B
G Switch quantity : 1 on rod end D D F
H Option : Port position F, cushion needle position B S D D
X F (common port) F
2006
SM-25
CA/OV2
MRG2
MDC2
JSK/M2
CMK2
CMA2
SMD2
USSD
STS L
SRM3
SRG3
RCC2
UCAC2
UCA2
MRL2
CAC4
SCA2
CKV2
MSD*
STR2
SRL3
SRT3
Ending
JSC3
SCP*2
JSB3
ULK*
HCM
SCM
MVC
Rodless type
SCG
MFC
USC
LCM
HCA
SHC
SCS
SSD
LMB
STG
LCG
GLC
CAT
STK
JSG
LCS
LCY
LCT
FC*
Rodless cylinder
How to order
SRL3 Series
2007
Note 1: Some combinations are not available depending on bore size. Confirm the conditions of options of H "How to order" on the previous page.
: Combination not available
Port position and cushion needle position F (common port)
Symbol A A1 A2 A3 Y Y1 L* N* C H U Blank R B T D S X
Port position D, cushion needle position D
Port position D, cushion needle position F
Port position R, cushion needle position B (common port)
Port position F, cushion needle position B
Note 2: LB1 can not be used if port position is D. (ø25, ø32)

Port position R, cushion needle position F (common port)
Port position F, cushion needle position F (standard)
: Combination available

Option

C mount bracket
Intermediate support bracket (LB1)
Option combination table
Intermediate support bracket (00, LB)

Thin type floating joint
Floating joint
Adjustable full-stroke bracket retrofitting
Adjustable full-stroke L end only, with shock absorber
Adjustable full-stroke R end only, with shock absorber
Adjustable full-stroke both ends, with shock absorber
Blank
A1
A2
A3
Y1
N*
L*
C
H
U
D
A
S
X
T
Option
SRL3 Series
SCP*2 How to order switch (Refer to page 2053 to 2055 for configurations )
CMK2
Switch body + mounting bracket (Note 1)
CMA2
SCM
SRL3 M0H*
SCG
SCA2
Switch model no.
SCS
(Page 2006 F section)
CKV2
Only switch body
CA/OV2
SSD SW M0H* *Lead wire length
Blank 1m (standard)
CAT
MDC2 3 3m (option)
Switch model no. 5 5m (option)
MVC
(Page 2006 section F )
SMD2 "*" mark indicates length of lead wire.
MSD* Mounting bracket (Note 2)
FC* • M type switch • T type switch
STK
ULK* SRL3 M SRL3 T
JSK/M2
JSG Lead wire holder (Note 3)
JSC3
USSD
SRL3 MH
USC Note 1: Lead wire holder is not included in the switch and its mounting bracket.
When a lead wire holder is necessary, place an order separately.
JSB3
Note 2: M type switch and T type switch has different brackets.
LMB
Note 3: Lead wire holder comes in a set of 10 pcs.
STG
STS L Discrete shock absorber model no. Discrete intermediate support bracket model no.
LCS LB
LCG SRL3 40 NCK
LCM
SRL3 40 L (2 piece/1 set)
LCT Bore size
Bore size
(Page 2006 B section)
LCY (Page 2006 B section)
STR2 (Square nut 1 pc., hex nut for fixing shock absorber 1pc.)
LB1
UCA2 Square nut for shock absorber for SRL3-40 is a special design.
HCM Applicable shock absorber model No. SRL3 32 N (2 piece/1 set)

HCA Model Shock absorber model no.
SRL3 SRL3-12 NCK-00-0.3-C Bore size
SRL3-16 NCK-00-0.3-C
(Page 2006 section B )
SRG3
SRM3 SRL3-20 NCK-00-0.7-C Adjustable full-stroke kit model no.
SRT3 SRL3-25 NCK-00-1.2
MRL2 SRL3-32 NCK-00-2.6 SRL3 40 A1 (1 set)

MRG2 SRL3-40 NCK-00-7
SRL3-50 NCK-00-12 Bore size
SM-25 (Page 2006 section B )
SRL3-63 NCK-00-12
CAC4
SRL3-80 NCK-00-20 Repair parts model no.
UCAC2
SRL3-100 NCK-00-20
RCC2
MFC
SRL3 40 K 200
Discrete C mount bracket model no. (for ø12 to ø63)
SHC
Bore size Stroke length
GLC SRL3 40 C (Page 2006 section B ) (Page 2006 section E )
Ending
Mounting bracket model no.
Bore size
A Mounting style
SRL3 (LB and LB1) 40
(C mount bracket and mounting bolt 4 pc.)
(Bracket 2 piece and mounting bolt 4 pc.)
Floating joint set model no. Bore size
SRL3 40 Y Height adjustment plate set model no.
Bore size SRL3 40 U

(Mount, mount base, pin, plain washer, pan head machine Bore size
screw with spring washer and 4 mounting bolts) (Page 2006 section B )
(Plate and mounting bolt 4 pc.)
2008
SRL3 Series
Internal structure and parts list
Internal structure and parts list SCP*2
CMK2
ø12 to ø40.
CMA2
SCM
SCG
SCA2
28 15 18 16 19 17 1 2 21 3 4 5 22 6 23 7 8 9 10 29 30 31 24 25 11 26 12 13 14 27 20
SCS
CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
JSG
JSC3
Parts list USSD

USC
No. Parts name Material Remarks No. Parts name Material Remarks
JSB3
1 Belt cover Polyamide 18 Needle gasket Nitrile rubber
LMB
2 Cover (L) Aluminum alloy Baking finish 19 Cushion needle Steel Galvanizing
STG
3 Table cover Polyacetal resin Plug (ø12, ø16) Brass Nickeling
20 STS L
4 Spring Steel Blackening Plug (ø20 to ø40) Steel Galvanizing
5 Belt tension Polyacetal resin 21 Cushion packing seal Urethane rubber LCS
Parallel pin (ø12 to ø20) Stainless steel 22 Piston packing seal Nitrile rubber LCG
6 LCM
Shaft (ø25 to ø40) Steel Galvanizing 23 Yoke Aluminum alloy Alumite
7 Table Aluminum alloy Alumite 24 Piston Polyacetal resin LCT
8 Seal belt Urethane rubber 25 Cylinder tube Aluminum alloy Alumite LCY
9 Dust-proof belt Stainless steel + nitrile rubber 26 Cylinder gasket Nitrile rubber STR2
10 Magnet Special alloy Nickeling 27 O ring for common port Nitrile rubber UCA2
11 Cushion adapter Polyacetal resin 28 Dust wiper Polyacetal resin HCM
12 Cover (R) Aluminum alloy Baking finish 29 2-side adhesive tape HCA
13 Belt spacer Steel Galvanizing Stainless steel (ø12 to ø20) SRL3
30 Plate
14 Hexagon socket set screw Alloy steel Galvanizing Alloy steel (ø25 to ø40) Galvanizing SRG3
15 Hexagon socket bolt Alloy steel Galvanizing 31 Cross-recessed tapping screw Stainless steel SRM3
16 Hexagon socket bolt Stainless steel SRT3
17 Hexagon socket bolt Alloy steel Galvanizing MRL2
MRG2
Repair parts list SM-25
Tube CAC4
Kit No. Repair parts number
Bore size (mm) UCAC2
RCC2
ø12 SRL3-12K-*
MFC
ø16 SRL3-16K-* SHC

GLC
ø20 SRL3-20K-* 8 9 18 21 Ending
Rodless cylinder
Rodless type
22 26 27 28
ø25 SRL3-25K-*
ø32 SRL3-32K-*
ø40 SRL3-40K-*
Note: Specify the kit no. when placing an order.

Specify the stroke length for *.
2009
SRL3 Series
SCP*2 Internal structure and parts list
CMK2
ø50 to ø63.
CMA2
SCM
SCG
SCA2
28 16 15 18 19 17 1 2 3 4 5 6 7 8 9 10 23 24 29 30 31 22 21 25 11 26 27 12 13 14 32 20
SCS
CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
JSG
JSC3
USSD Parts list
USC
No. Parts name Material Remarks No. Parts name Material Remarks
JSB3
1 Belt cover Polyamide 17 Hexagon socket bolt Alloy steel Galvanizing
LMB
2 Cover (L) Aluminum alloy Baking finish 18 Needle gasket Nitrile rubber
STG
3 Table cover Polyacetal resin 19 Cushion needle Steel Galvanizing
STS L 4 Spring Steel Blackening 20 Plug Steel Galvanizing
LCS 5 Belt tension Polyacetal resin 21 Cushion packing seal Urethane rubber
LCG 6 Shaft Steel Galvanizing 22 Piston packing seal Nitrile rubber
LCM 7 Table Aluminum alloy Alumite 23 Yoke Aluminum alloy Alumite
LCT 8 Seal belt Urethane rubber 24 Piston Polyacetal resin
LCY 9 Dust-proof belt Stainless steel + nitrile rubber 25 Cylinder tube Aluminum alloy Alumite
STR2 10 Magnet Special alloy Nickeling 26 Cylinder gasket Nitrile rubber
UCA2 11 Cushion ring Polyacetal resin 27 O ring for common port Nitrile rubber
HCM 12 Cover (R) Aluminum alloy Baking finish 28 Dust wiper Polyacetal resin
HCA 13 Belt spacer Steel Galvanizing 29 2-side adhesive tape
SRL3 14 Hexagon socket set screw Alloy steel Galvanizing 30 Plate Alloy steel Galvanizing
SRG3 15 Hexagon socket bolt Alloy steel Galvanizing 31 Cross-recessed tapping screw Stainless steel
SRM3 16 Hexagon socket bolt Stainless steel 32 Cushion ring gasket Nitrile rubber
SRT3
MRL2 Repair parts list
MRG2 Tube
SM-25 Bore size (mm)
CAC4
ø50 SRL3-50K-* 8 9 18 21 22
UCAC2
RCC2 26 27 28 32
ø63 SRL3-63K-*
MFC
SHC Note: Specify the kit no. when placing an order Specify stroke length for "*".
GLC
Ending
2010
SRL3 Series
CMK2
ø80 to ø100.
CMA2
29 SCM
10 SCG
SCA2
SCS
16 15 18 19 17 1 2 28 3 4 5 6 7 8 9 23 30 31 24 22 21 25 11 26 13 14 12 32 20 CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
27 34 33
JSK/M2
JSG
JSC3
USSD
USC
JSB3
LMB
STG
Parts list STS L
No. Parts name Material Remarks No. Parts name Material Remarks LCS
1 Belt cover Polyamide 18 Needle gasket Nitrile rubber
LCG
2 Cover (L) Aluminum alloy Baking finish 19 Cushion needle Steel Galvanizing
LCM
3 Table cover Polyacetal resin 20 Plug Steel Galvanizing
LCT
4 Spring Steel Blackening 21 Cushion packing seal Urethane rubber
LCY
5 Belt tension Polyacetal resin 22 Piston packing seal Nitrile rubber
STR2
6 Shaft Steel Galvanizing 23 Yoke Aluminum alloy Alumite
UCA2
7 Table Aluminum alloy Alumite 24 Piston Polyacetal resin
HCM
8 Seal belt Urethane rubber 25 Cylinder tube Aluminum alloy Alumite
HCA
9 Dust-proof belt Stainless steel + nitrile rubber 26 Cylinder gasket Nitrile rubber
SRL3
10 Magnet Special alloy Nickeling 27 O ring for common port Nitrile rubber
SRG3
11 Cushion ring Polyacetal resin 28 Felt (1) Wool
SRM3
12 Cover (R) Aluminum alloy Baking finish 29 Felt (2) Wool
Belt spacer Steel Galvanizing Plate Alloy steel Galvanizing
SRT3
13 30
Hexagon socket set screw Alloy steel Galvanizing Cross-recessed tapping screw Stainless steel MRL2
14 31
15 Hexagon socket bolt Alloy steel Galvanizing 32 Cushion ring gasket (1) Nitrile rubber MRG2
16 Hexagon socket bolt Stainless steel 33 Cushion ring gasket (2) Nitrile rubber SM-25
17 Hexagon socket bolt Alloy steel Galvanizing 34 Plug Steel Galvanizing CAC4
UCAC2
RCC2
Repair parts list MFC
Tube SHC
Kit No. Repair parts number GLC
Bore size (mm)
Ending
ø80 SRL3-80K-* 8 9 18 21 22 26
Rodless cylinder
Rodless type
27 28 29 32 33
ø100 SRL3-100K-*
Note: Specify the kit no. when placing an order Specify stroke length for "*".
2011
SRL3 Series
SCP*2 Dimensions (ø12 to ø20)
CMK2 SRL3 with cylinder switch SRL3-**-**-***-M*V*
CMA2 (Radial lead wire)
SCM
LL + stroke length
SCG
L + stroke length (LA)
SCA2
SCS J TA J
TC
CKV2 HB TB HB DC
TD 4-TE depth TL
CA/OV2 HA HA
SSD
2-plug
CAT
F
C
MDC2
G
M0V
CKD
CKD
M0V
R
B
MVC
SMD2 2-Q (plug)
DB HD 23.5 23.5 HD
MSD* 4-M
FC* A E KA Stroke length 2-Q E
STK PQ PP P + stroke length
L side R side
ULK*
JSK/M2
JSG
SRL3 with cylinder switch SRL3-**-**-***-M*H*
(Axial lead wire)
JSC3
USSD
USC
JSB3
CKD
M0H
CKD
M0H
LMB
STG
STS L 35.5
PP HD 35.5 RD
LCS
LCG
LCM SRL3-**-**-***-T*H with cylinder switch (T*W, T*Y or T2YD)
LCT
LCY
STR2
UCA2 CKD
T2YH
CKD
T2YH
HCM
HCA PA
HD PB 3 RD
PP
SRL3
SRG3
SRM3 SRL3-**-**-***-T*V with cylinder switch (T*W and T*Y)
SRT3
MRL2
MRG2
SM-25 T2YV
CKD CKD
T2YV
CAC4
UCAC2
PA HD PB HD
RCC2 PP
MFC
SHC
RD: Max. sensitive position HD: Max. sensitive position
GLC
Ending
Symbol
A B C DB DC E G HA HB J KA L LL LA M P PQ Q TA TB TC TD TE
Bore size (mm)
ø12 33 10.5 33 10 11 8.5 24 6 14 17.5 59.5 136 139 3 M3 depth 5 119 19 M5 81 42 29 13 M3 depth 5
ø16 37 12 37 14 12 8.5 27 6 14 17.5 66 149 152 3 M3 depth 5 132 21 M5 88 48 32 15 M3 depth 5
ø20 44 14 42 16 16 10.5 31 8.5 18.5 22 74 169 171.5 2.5 M4 depth 6.5 148 24.5 Rc1/8 100 60 38 18 M4 depth 6
Symbol With switch

Bore size (mm) HD RD PB PP
PA
M* T*Y* T*W M* T*Y* T*W T*Y* T2YD T*W* M*V M*H T*YV T*YH T2YD T*WV T*WH
ø12 40.5 36 32 60.5 65 69 24.3 35 34 33.5 24.5 24.5 26 23 28.4 20.7 17.2
ø16 47 42 38 67 72 76 26.3 35 34 33.5 26.5 26.5 28 25 30.4 22.7 19.2
ø20 52.5 48 44 72.5 77 81 29.3 35 34 33.5 29.5 29.5 31 28 33.4 25.7 22.2
Note 1: Refer to pages 2048 to 2052 for dimensions with options and dimensions of accessories.
2012
SRL3 Series
Double acting
Dimensions (ø12 to ø20)
SCP*2
SRL3 with foot bracket SRL3-LB-**-*** CMK2
CMA2
SCM
SCG
SCA2
SCS
CKV2
CA/OV2
C
SSD
CAT
TF
SB V U U V MDC2
4-øX
SA W + stroke length MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
SRL3 with foot bracket SRL3-LB1-**-*** JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
C
LCS
TY
LCG
LCM
TG
SB V U 2-Q (plug) U V LCT

4-øX 2-Q
SA W + stroke length LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
Symbol With foot bracket (LB) With foot bracket (LB1)

Bore size (mm)
SA SB TF U V W X SA SB TG TY U V W X
ø12 32 24 8 6 4 148 3.4 32 24 6 39 6 4 148 3.4
ø16 35 26 8 6 4 161 3.4 35 26 6 43 6 4 161 3.4
ø20 43 33 10 6 6 181 4.5 43 33 8 50 6 6 181 4.5
2013
SRL3 Series
CMK2 SRL3 with cylinder switch SRL3-**-**-***-M*V*
SCM LL + stroke length
SCG
TC L + stroke length (LA)
SCA2
J TA J
SCS
TD HB TB HB DC
CKV2
HA 4-TE HA
CA/OV2
SSD
CAT
F B
C
MDC2
G
M0V
CKD
CKD
M0V
DD
B
MVC R
HC
HC
SMD2 D 2-Q (plug)
DB HD 23.5 23.5 HD
MSD* 4-M
A E KA Stroke length 2-Q E
FC*
PP P + stroke length
STK
ULK* L side R side
JSK/M2
SRL3 with cylinder switch SRL3-**-**-***-M*H*
JSG
(Axial lead wire)
JSC3
USSD L side R side
USC
JSB3
LMB
CKD
M0H
CKD
M0H
STG
STS L 35.5
PP HD 35.5 RD
LCS
LCG
SRL3 with cylinder switch (T*W, T*Y, T2YD) SRL3-**-**-***-T*H
LCM
LCT
LCY
STR2 CKD CKD
T2YH T2YH
UCA2
HCM PA
HCA PP HD PB 3 RD
SRL3
SRL3 with cylinder switch (T*W, T*Y) SRL3-**-**-***-T*V
SRG3
SRM3
SRT3
MRL2 CKD
T2YV
CKD
T2YV
MRG2
SM-25 PA
PP HD PB HD
CAC4
UCAC2
RCC2 RD: Max. sensitive position HD: Max. sensitive position
MFC
Symbol
SHC A B C DB DC DD E G HA HB HC J KA L LL LA M P Q TA TB TC TD TE
Bore size (mm)
GLC ø25 53 17 53 20 26 19 14 40.5 7.5 20 18.9 24 81 190 192 2 M6 depth 9 162 1
Rc /8 122 70 48 20 M5 depth 6
Ending ø32 66 18.5 57 32 27 21 15 43.5 10 23.5 21.5 28 98 226 228.5 2.5 M6 depth 9 196 Rc1/4 134 80 56 20 M6 depth 7.5
ø40 80 22 67 36 35 28 17 51.5 13 26 27 31 105 244 246.5 2.5 M8 depth 12 210 Rc1/4 148 90 68 30 M6 depth 9
ø50 96 28 82 45 35 35 23 61 15 33 35.3 39 106 258 260.5 2.5 M8 depth 12 212 Rc3/8 152 100 80 30 M8 depth 10.5
ø63 118 35 95 50 39 42 19 74 15 32 43 39 129 296 298.5 2.5 M10 depth 15 258 Rc3/8 168 110 102 40 M8 depth 11.5
Symbol With switch

PA
ø25 60 56 52 82 86 90 34.3 35 34 33.5 34.5 34.5 36 33 38.4 30.7 27.2
ø32 74 70 66 96 100 104 41.3 35 34 33.5 41.5 41.5 43 40 45.4 37.7 34.2
ø40 80 76 72 102 106 110 48.3 35 34 33.5 48.5 48.5 50 47 52.4 44.7 41.2
ø50 79 75 71 101 105 109 56.3 35 34 33.5 56.5 56.5 58 55 60.4 52.7 49.2
ø63 98 94 90 120 124 128 67.3 35 34 33.5 67.5 67.5 69 66 71.4 63.7 60.2
2014
SRL3 Series
Double acting
Dimensions (ø25 to ø63) SCP*2
SRL3 with foot bracket SRL3-LB-**-***with foot bracket CMK2
CMA2
SCM
SCG
SCA2
SCS
4-øXF
CKV2
CA/OV2
TF
C
SSD
CAT
SB VU 4-øX UV MDC2
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
SRL3-LB1-**-***with foot bracket JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
C
TY
LCS
LCG
LCM
TG
SB V U 2-Q (plug) UV
2-Q LCT
4-øX SA W + stroke length
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type

Bore size (mm)
SA SB TF U V W X XF SA SB TG TY U V W X
ø25 52 20 12 9 11 208 7 – 50 20 10 63 9 11 208 7
ø32 64 32 12 9 11 244 7 – 64 32 10 67 9 11 244 7
ø40 80 36 15 11 9 266 9 14 spot face depth 8.6 – – – – – – – –
ø50 94 45 20 11 9 280 9 14 spot face depth 8.6 – – – – – – – –
ø63 116 50 25 13 12 322 11 17.5 spot face depth 10.8 – – – – – – – –
2015
SRL3 Series
CMK2 SRL with cylinder switch SRL3-**-**-***-M*V*
CMA2 (Radial lead wire) Eye bolt for mounting
SCM Tap TB 4-TE
4-S
SCG
SCA2
TD
SCS
ZA
CKV2
CA/OV2
SSD
ZB
CAT L + stroke length
TC
MDC2
J TA J
MVC
HB HB
SMD2
HA HA 2-Q
MSD*
FC* F
R B
C
STK
DE
DE
DC
DD
B
ULK*
HC
HC
DF
JSK/M2 A 23.5 23.5 DA 2-Q (plug)
HD HD
JSG PP E KA Stroke length Q (plug)
JSC3
E P+Stroke E
USSD 4-M ZD ZE 2-R(Plug)
USC
JSB3
ZC
ZC
LMB
DB
STG Ｄ
L side R side
STS L
LCS ZD
LCG SRL with cylinder switch SRL3-**-**-***-M*H*
LCM (Axial lead wire)
LCT
LCY
STR2
UCA2
HCM
HCA 35.5
PP HD 35.5 RD
SRL3
SRG3 SRL3 with cylinder switch (T*W, T*Y, T2YD) SRL3-**-**-***-T*H
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4 PA
PP HD PB 3 RD
UCAC2
RCC2 SRL3 with cylinder switch (T*W, T*Y) SRL3-**-**-***-T*V
MFC
SHC
GLC RD: max. sensitive position
Ending HD: max. sensitive position
PA HD PB HD
PP
Symbol
A B C DA DB DC DD DE DF E G HA HB HC J KA L M P Q R S
Bore size (mm)
ø80 162 49 130 64 93 58 38 65 33 42 106 30 59 64.5 70 208 500 M12 depth 18 416 Rc1/2 Rc3/8 M12 depth 23
ø100 198 61.5 150 73 108 71.5 47.5 81.5 41.5 43 125 30 69 76.5 80 222 530 M12 depth 18 444 Rc1/2 Rc1/2 M12 depth 23
Symbol With foot bracket

Bore size (mm) TA TB TC TD TE ZA ZB ZC ZD ZE
SA SB TF U V W X
ø80 228 150 146 50 M12 depth 15 60 21 32 50 30 162 134 25 13 12 526 14
ø100 238 160 170 60 M12 depth 15 60 21 36.5 55 30 198 160 30 15 15 560 14
2016
SRL3 Series
Double acting
SRL3 with foot bracket SRL3-LB-**-***with foot bracket CMK2
CMA2
SCM
SCG
SCA2
SCS
CKV2
CA/OV2
TF
C
SSD
CAT
4-øX MDC2
SB V U U V MVC
SA W + stroke length SMD2
MSD*
FC*
STK
ULK*
JSK/M2
JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
Symbol With switch

PA
ø80 170 165 161 190 195 199 87.3 35 34 33.5 87.5 87.5 89 86 91.4 83.7 80.2
ø100 175 170 166 195 200 204 105.3 35 34 33.5 105.5 105.5 107 104 109.4 101.7 98.2
2017
Rodless cylinder, resin guide type
SCP*2
SRL3-G Series
CMK2
Bore size ø: ø12, ø16, ø20, ø25, ø32
CMA2 ø40, ø50, ø63, ø80, ø100
SCM JIS symbol
SCG
SCA2
SCS
CKV2 Specifications
CA/OV2 Descriptions SRL3-G
SSD Bore size mm ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
CAT Actuation Double acting
MDC2 Working fluid Compressed air
MVC Max. working pressure MPa 0.7
SMD2 Min. working pressure MPa 0.25 0.15 0.1
MSD* Withstanding pressure MPa 1.05
FC* Ambient temperature 5 to 60
STK Port size M5 Rc1/8 Rc1/4 Rc3/8 Rc1/2
+ 2.0
ULK* Stroke tolerance mm (up to 1000), + 02.5 (up to 3000), + 03.0 (up to 5000)
0
JSK/M2 Working piston speed mm/s 50 to 2000 (standard port piping) (note 1)
JSG Cushion Air cushion
JSC3 Lubrication Not required (use turbine oil Class 1 ISO VG32 if lubricated)
USSD Note 1: Piston speed used with common port piping differs with the stroke. Contact CKD for details.
USC Allowable energy absorption Stroke length

JSB3 Bore size Cushioned No cushion With shock absorber (initial setpoint) Bore size Standard stroke length Max. stroke length Min. stroke length
LMB (mm) (mm) (mm) (mm) (mm)
Allowable energy absorption (J) Cushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm)
STG ø12 0.03 14.5 0.003 2.4 5.5 ø12
STS L
ø16 0.22 19.2 0.007 2.4 5.5 ø16
LCS
ø20 0.59 22.2 0.010 5.7 7 ø20
LCG 200,300
ø25 1.40 20.9 0.015 10 9 ø25
LCM 400,500
ø32 2.57 23.5 0.030 18 13 ø32
LCT 600,700 5000 1
ø40 4.27 23.9 0.050 50 16.5 ø40
LCY 800,900
ø50 9.13 24.9 0.072 86 21 ø50
STR2 1000
ø63 17.4 29.6 0.138 86 21 ø63
UCA2
ø80 40 45.8 0.393 143 25 ø80
HCM
ø100 67 45.8 0.622 143 25 ø100
HCA
** The intermediate stroke can be manufactured in 1 mm increments.
SRL3 M type switch quantity and min. stroke length (mm)
SRG3 Switch quantity 1 2 3 4 5 6
SRM3 Switch model no.
SRT3 Bore size (mm)
MRL2 ø12 10 10 30 45 (70) 60 90 (120) 90 135 (170) 120 180 (220) 150 225 (270)
ø16 10 10 30 45 (70) 60 90 (120) 90 135 (170) 120 180 (220) 150 225 (270)
MRG2
ø20 10 10 30 45 (70) 60 90 (120) 90 135 (170) 120 180 (220) 150 225 (270)
SM-25 ø25 10 10 30 45 (70) 60 90 (120) 90 135 (170) 120 180 (220) 150 225 (270)
CAC4 ø32 10 10 30 45 60 90 90 135 120 180 150 225
UCAC2 ø40 10 10 30 45 60 90 90 135 120 180 150 225
RCC2 ø50 15 15 30 45 60 90 90 135 120 180 150 225
MFC ø63 15 15 30 45 60 90 90 135 120 180 150 225
ø80 25 50 100 150 200 250
SHC
ø100 25 50 100 150 200 250
GLC
Ending
T type switch quantity and min. stroke length (mm)
Switch model no.
Bore size (mm)
ø12 5 5 45 50 (70) 85 100 (120) 125 150 (170) 165 200 (220) 205 250 (270)
ø16 5 5 45 50 (70) 85 100 (120) 125 150 (170) 165 200 (220) 205 250 (270)
ø20 5 5 45 50 (70) 85 100 (120) 125 150 (170) 165 200 (220) 205 250 (270)
ø25 10 10 45 50 (70) 85 100 (120) 125 150 (170) 165 200 (220) 205 250 (270)
ø32 10 10 45 50 85 100 125 150 165 200 205 250
ø40 10 10 45 50 85 100 125 150 165 200 205 250
ø50 10 10 45 50 85 100 125 150 165 200 205 250
ø63 10 10 45 50 85 100 125 150 165 200 205 250
ø80 15 15 45 50 85 100 125 150 165 200 205 250
ø100 15 15 45 50 85 100 125 150 165 200 205 250
2018
SRL3-G Series
Specifications
One color/bi-color indicator CMK2
SCG
SCA2
Reed 2 wire MDC2
Descriptions
Applications PLC, relay PLC, relay, IC circuit(w/o lamp), serial connection SMD2
MSD*
FC*
STK
Leakage current ULK*
0mA
JSK/M2
Note 2: Refer to Ending 1 for other switch specifications. JSG
JSC3
USSD
Switch specifications (T type switch)
USC
2 Color indicator type
JSB3
Proximity 2 wire Proximity 3 wire
Descriptions LMB
T2YH/T2YV T2WH/T2WV T3YH/T3YV T3WH/T3WV
Applications PLC PLC, relay STG
Output method – NPN output NPN output STS L
Power voltage – 10 to 28 VDC LCS
Load voltage 10 to 30 VDC 24 VDC ±10% 30 VDC or less LCG
Load current 5 to 20mA (Note 1) 50mA or less LCM
Red/green Red/green Red/green Red/green LCT
Light LED LED LED LED LCY
(ON lighting) (ON lighting) (ON lighting) (ON lighting)
STR2
Leakage current 1mA or less 10µA or less
UCA2
Strong magnetic field proof HCM
Proximity 2 wire HCA
Descriptions SRL3
T2YD and T2YDT
Applications PLC SRG3
Light Red/green LED (ON lighting) SRM3
Load voltage 24 VDC ±10% SRT3
Load current 5 to 20mA MRL2
Internal voltage drop 6V or less MRG2
CAC4
Cylinder weight Unit: kg UCAC2
Weight when stroke length is 0mm Additional RCC2
Bore size (mm) Basic type Foot type Weight per switch weight per MFC
(00) (LB) (LB1) (Including bracket) St=100mm SHC
ø12 0.24 0.25 0.26 0.10 GLC
ø16 0.32 0.33 0.35 0.13 Ending
ø20 0.52 0.54 0.58 0.18
Rodless cylinder
Rodless type
ø25 1.0 1.1 1.1 0.28

ø32 1.5 1.6 1.7 0.36
0.02
ø40 2.4 2.5 – 0.53
ø50 3.5 3.6 – 0.75
ø63 6.1 6.4 – 1.11
ø80 18.8 19.4 – 2.32
ø100 26.6 27.6 – 3.38
2019
SRL3-G Series
A Mounting style
CMK2 Without switch
00 Basic type
CMA2 SRL3-G 00 12 B 200 B LB Axial foot type
SCM With switch LB1 Axial foot type
SCG B Bore size (mm)
SRL3-G 00 12 B 200 M0H R B
SCA2 12 ø12
SCS 16 ø16
CKV2 20 ø20
A Mounting style
25 ø25
CA/OV2 Note 1
32 ø32
SSD B Bore size
40 ø40
CAT 50 ø50
MDC2 63 ø63
MVC 80 ø80
100 ø100
SMD2
C Port thread type
MSD* C Port thread type Blank Rc thread
FC* N NPT thread (ø20 and over) (custom order)
ULK* D Cushion
D Cushion
JSK/M2 B Both sides cushioned
L L side cushioned
JSC3
N No cushion
USSD
USC E Stroke length Bore size Stroke length Note 2 Custom stroke length
LMB F Switch model no.
STG F Switch model no.
Contact Reed
Lead wire Lead wire Lead
Indicator
STS L Axial Radial Line
LCS M0H* M0V* 1 color indicator type
M5H* M5V* Without indicator light 2-wire
LCG
LCM Note on model no. M2H* M2V* 1 color indicator type
Note 1: When bore size 12, 16, 20, 25, 32 and option symbol
– M2WV* 2 color indicator type 2-wire
LCT M3H* M3V* 1 color indicator type
"R" and "T" is selected, mounting style will be "00"
LCY or "LB1". – M3WV* 2 color indicator type 3-wire
Proximity
STR2 (Mounting style "LB" is not available for option symbol M3PH* M3PV* 1 color indicator type (custom order) 3-wire
"R" and "T" because it can not be piped. ) T2WH* T2WV*
UCA2 Note 2: Refer to page 2018 for the minimal stroke for models 2-wire
HCM with a switch. T3WH* T3WV*
Note 3: Switches other than switch model no. are also 3-wire
HCA T3YH* T3YV*
available to.
SRL3 (Custom order) Refer to Ending 1 for details.
T2YD* – Strong magnetic field proof
2-wire
SRG3 Note 4: The asterisk (*) following L* and N* indicates the T2YDT* – (AC magnetic field dedicated)
number of brakets. Fill in "L2" for LB and "N2" for LB1 *Lead wire length
when 2 sets are necessary.
SRT3 2 piece/1 set 3 3m (option)
MRL2 Note 5: For port and cushion needle position indicating 5 5m (option)
symbol Refer pages 2026 to 2031 to dimensions.
MRG2
Note 6: Standard models of ø12 to ø15 needs to have their
G Switch quantity
G Switch R One on R side
SM-25 cover removed and full stroke adjustment mounted
quantity One on L side
CAC4 using a plate nut afterwards. L
"A3" is a option that will have a plate nut for mounting D 2
UCAC2 installed beforehand so that it can be mounted T 3
RCC2 afterwards without removing the cover. 4 4 pieces (fill in switch quantity if 4 or more switches are required.)
MFC Note 7: Thread size will be M4 for ø12 and ø16, and thread
size will be M5 for ø20 when "H" is selected. H Option
SHC H Option Bore size (ø) 12 16 20 25 32 40 50 63 80 100
Note 8: Refer to "Optional combination table" on the
Note 3, Note 4
GLC following page for available combinations. A Adjustable full-stroke both sides and shock absorber
Note 5, Note 6
Note 9: Copper and PTFE free as standard. A1 Adjustable full-stroke R sides and shock absorber
Ending
A2 Adjustable full-stroke L sides and shock absorber
<Example of model number> A3 Adjustable full-stroke bracket retrofitting
SRL3-G-00-12B-200-M0H-R-B L* Intermediate support bracket (00, LB)
Model: Rodless cylinder guided C C mount bracket
A Mounting style : Basic type H Table mounting thread size up
B Bore size : ø12mm U Height adjustment plate
C Port thread type : Rc thread Blank F (standard) F (standard)
R
Port position
D Cushion : Both sides cushioned R (common port) F

B F B
E Stroke length : 200mm
T R (common port) B
D D F
G Switch quantity : 1 on rod end S D D
H Option : Port position F, cushion needle position B X F (common port) F
2020
SM-25
MRG2
MDC2
JSK/M2
CMK2
CMA2
SMD2
USSD
STS L
SRM3
CA/OV2
SRG3
RCC2
UCAC2
UCA2
MRL2
CAC4
SCP*2
SCA2
CKV2
MSD*
STR2
SRL3
SRT3
Ending
JSC3
JSB3
ULK*
HCM
SCM
MVC
Rodless type
SCG
MFC
USC
LCM
HCA
SHC
SCS
SSD
LMB
STG
LCG
GLC
CAT
STK
JSG
LCS
LCY
LCT
FC*
Rodless cylinder
How to order
SRL3-G Series
2021
Note 1: Some combinations are not available depending on bore size. Confirm the conditions of options of H "How to order"
Port position F, cushion needle position F (common port)
Symbol A A1 A2 A3 L* N* C H U Blank R B T D S X

: Combination possible

Option

C mount bracket
on the previous page.

Blank
A1
A2
A3
N*
L*
C
H
U
D
A
S
X
T
Option
SRL3-G Series
SCP*2 How to order switch (Refer to page 2053 to 2055 for configurations )
CMK2
CMA2
SCM
SRL3 M0H*
SCG
SCA2
SCS Switch model no.
CKV2 (Page 2020 section F )
CA/OV2 Only switch body
SSD
CAT SW M0H* *Lead wire length
MDC2 Blank 1m (standard)
3 3m (option)
MVC
Switch model no. 5 5m (option)
SMD2
MSD* "*" mark indicates length of lead wire.
Mounting bracket (Note 2)
FC*
· M type switch · T type switch
STK
ULK*
SRL3 M SRL3 T
JSK/M2
JSG
Lead wire holder (Note 3)
JSC3
USSD
USC
SRL3 MH
JSB3 Note 1: Lead wire holder is not included in the switch and its mounting bracket. When a lead wire holder is necessary, place an order separately.
LMB Note 2: M type switch and T type switch has different brackets.
STG Note 3. Lead wire holder comes in a set of 10 pieces.
STS L
Discrete intermediate support bracket model no.
LCS Discrete shock absorber model no. LB
LCG
LCM SRL3 40 NCK SRL3 40 L (2 piece/1 set)
LCT
LCY Bore size Bore size
STR2 (Page 2020 section B ) (Page 2020 section B )
(Square nut 1 pc., hex nut for fixing shock absorber 1pc.) LB1
UCA2
HCM Square nut for shock absorber for SRL3-40 is a special design. SRL3 32 N (2 piece/1 set)
HCA
SRL3
Applicable shock absorber model No. Bore size
SRG3 (Page 2020 section B )
Model Shock absorber model no.
SRM3
SRL3-12 NCK-00-0.3-C Adjustable full-stroke kit model no.
SRT3
SRL3-16 NCK-00-0.3-C
MRL2
MRG2
SRL3-20 NCK-00-0.7-C SRL3 40 A1 (1 set)
SRL3-25 NCK-00-1.2
SM-25
SRL3-32 NCK-00-2.6 Bore size
CAC4 (Page 2020 section B )
SRL3-40 NCK-00-7
UCAC2 SRL3-50 NCK-00-12 Repair parts model no.
RCC2 SRL3-63 NCK-00-12
MFC
SHC
SRL3-80 NCK-00-20 SRL3-G 40 K 200
SRL3-100 NCK-00-20
GLC
Ending Discrete C mount bracket model no. (for ø12 to ø63) (Page 2020 section B ) (Page 2020 section E )
SRL3 40 C Mounting bracket model no.

A Mounting style
Bore size (Bracket 2 piece and mounting bolt 4 pc.)
(Page 2020 section B ) Bore size
(C mount bracket and mounting bolt 4 pc.) (Page 2020 section B )
Height adjustment plate set model no.
SRL3 40 U
Bore size
(Plate, mounting bolt 4 pc.)
2022
SRL3-G Series
Internal structure drawing and parts list (ø12 to ø40) SCP*2
CMK2
CMA2
4 3 2 1 SCM
SCG
SCA2
SCS
CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
5
JSK/M2
JSG
JSC3
Parts list USSD
No. Parts name Material Remarks No. Parts name Material Remarks USC
1 Slider Polyacetal resin 4 Nut Steel Galvanizing
JSB3
2 Slider plate Steel 5 Dust wiper Polyacetal resin
LMB
3 Adjusting screw Alloy steel Galvanizing
STG
STS L
LCS
Repair parts list
LCG
Tube LCM
bore size (mm)
LCT
LCY
ø12 SRL3-G-12K-*
STR2
UCA2
HCM
ø16 SRL3-G-16K-*
HCA
SRL3
SRG3
ø20 SRL3-G-20K-*
1 5 8 9 SRM3
18 21 22 26 SRT3
ø25 SRL3-G-25K-*
MRL2
27 MRG2
SM-25
ø32 SRL3-G-32K-* CAC4
UCAC2
RCC2
ø40 SRL3-G-40K-* MFC
SHC
Note 1: Specify the kit no. when placing an order Specify stroke length for "*". GLC
Note 2: Parts no. on 8 9 18 21 22 26 27 is based on page 2009.
Ending
Rodless cylinder
Rodless type
2023
SRL3-G Series
SCP*2 Internal structure drawing and parts list (ø50, ø63)
CMK2
CMA2
SCM
SCG
SCA2 4 5 3 2 1
SCS
CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
JSG
JSC3
USSD
Parts list
USC No. Parts name Material Remarks No. Parts name Material Remarks
1 Slider Polyacetal resin 4 Nut Steel Galvanizing
JSB3
2 Slider plate Steel Galvanizing 5 Dust wiper Polyacetal resin
LMB
3 Adjusting screw Alloy steel Galvanizing
STG
STS L
LCS
Repair parts list
LCG
LCM
Tube
Bore size (mm)
LCT
LCY
ø50 SRL3-G-50K-*
STR2 1 5 8 9 18
UCA2
21 22 26 27 32
HCM
ø63 SRL3-G-63K-*
HCA
SRL3 Note 1: Specify the kit no. when placing an order. Specify stroke length for "*".
SRG3 Note 2: Parts no. on 8 9 18 21 22 26 27 32 is based on page 2010.
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
2024
SRL3-G Series
Internal structure drawing and parts list (ø80, ø100) SCP*2
CMK2
CMA2
SCM
SCG
SCA2
4 3 2 1 SCS
CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
JSG
JSC3
Parts list USSD
No. Parts name Material Remarks No. Parts name Material Remarks USC
1 Slider Polyacetal resin 3 Adjusting screw Alloy steel Galvanizing
JSB3
2 Slider plate Steel Galvanizing 4 Nut Steel Galvanizing
LMB
STG
STS L
Repair parts list
LCS
Tube LCG
Bore size (mm)
LCM
LCT
ø80 SRL3-G-80K-* 1 8 9 18 21
LCY
22 26 27 28 29 STR2
32 33 UCA2
ø100 SRL3-G-100K-*
HCM
HCA
Note 1: Specify the kit no. when placing an order Specify stroke length for "*".
Note 2: Parts no. on 8 9 18 21 22 26 27 28 29 32 33 is based on page 2011. SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
2025
SRL3-G Series
SCP*2
CMK2 SRL3-G with cylinder switch SRL3-G-**-**-***-M*V*
SCM
LL + stroke length
SCG
L + stroke length (LA)
SCA2 Y J TA J
SCS TC HB TB HB DC
CKV2 TD 4-TE
HA HA
CA/OV2
SSD 2-plug
CAT F
C
G
M0V
CKD
CKD
M0V
MDC2 R
B
MVC 2-Q (plug)

DA
SMD2 4-M 23.5 23.5
DB HD HD
MSD* E KA Stroke length 2-Q E
FC* A P + stroke length
STK PQ PP
L side R side
ULK*
JSK/M2
SRL3-G with cylinder switch SRL3-G-**-**-***-M*H*
JSG (Axial lead wire)
JSC3
USSD
USC
JSB3
LMB
CKD
M0H
CKD
M0H
STG
STS L 35.5
LCS PP HD 35.5 RD
LCG
LCM
LCT
LCY SRL3-G with cylinder switch SRL3-G-**-**-***-T*H* (T*W, T*Y, T2YD)
STR2
UCA2
HCM CKD CKD
T2YH T2YH
HCA
SRL3 PA HD PB 3 RD
SRG3 PP
SRM3
SRT3
MRL2 SRL3-G with cylinder switch SRL3-G-**-**-***-M*V* (T*W, T*Y)
MRG2
SM-25
CAC4 T2YV
CKD CKD
T2YV
UCAC2
RCC2
PA HD PB HD
MFC PP
SHC
GLC RD: Max. sensitive position HD: Max. sensitive position
Ending
Symbol
A B C DA DB DC E G HA HB J KA L LL LA M P PQ Q TA TB TC TD TE Y
Bore size (mm)
ø12 33 10.5 33 8 10 11 8.5 24 6 14 17.5 59.5 136 139 3 M3 depth 5 119 19 M5 81 42 29 13 M3 depth 5 36 to 38
ø16 37 12 37 12 14 12 8.5 27 6 14 17.5 66 149 152 3 M3 depth 5 132 21 M5 88 48 32 15 M3 depth 5 39 to 41
ø20 44 14 42 12 16 16 10.5 31 8.5 18.5 22 74 169 171.5 2.5 M4 depth 6.5 148 24.5 Rc1/8 100 60 38 18 M4 depth 6 43 to 45
Symbol With switch

PA
ø12 40.5 36 32 60.5 65 69 24.3 35 34 33.5 24.5 24.5 26 23 28.4 20.7 17.2
ø16 47 42 38 67 72 76 26.3 35 34 33.5 26.5 26.5 28 25 30.4 22.7 19.2
ø20 52.5 48 44 72.5 77 81 29.3 35 34 33.5 29.5 29.5 31 28 33.4 25.7 22.2
2026
SRL3-G Series
Double acting resin guide type
SCP*2
SRL3-G with foot bracket SRL3-G-LB-**-*** CMK2
CMA2
SCM
SCG
SCA2
Y SCS
CKV2
CA/OV2
C
SSD
CAT
MDC2
TF
SB V U U V
4-ØX MVC
SA W + stroke length
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
SRL3-G with foot bracket SRL3-G-LB1-**-*** JSG
JSC3
USSD
USC
JSB3
Y
LMB
STG
STS L
C
TY
LCS
LCG
LCM
TG
SB V U 2-Q (plug) U V
4-ØX 2-Q LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type

Bore size (mm)
SA SB TF U V W X SA SB TG TY U V W X
ø12 32 24 8 6 4 148 3.4 32 24 6 39 6 4 148 3.4
ø16 35 26 8 6 4 161 3.4 35 26 6 43 6 4 161 3.4
ø20 43 33 10 6 6 181 4.5 43 33 8 50 6 6 181 4.5
2027
SRL3-G Series
SCP*2
CMK2 SRL3-G with cylinder switch SRL3-G-**-**-***-M*V*
SCM Y LL + stroke length
SCG TC L + stroke length (LA)
SCA2 J TA J
SCS HB HB DC
TD TB
CKV2 4-TE
HA HA
CA/OV2
SSD
CAT F B
C
M0V
CKD
CKD
M0V
MDC2
DD
R
B
MVC
HC
HC
D
SMD2 DB HD 23.5 23.5 HD 2-Q (plug)
4-M
MSD* A E KA Stroke length 2-Q E
FC* PP P + stroke length
STK L side R side
ULK*
JSK/M2
SRL3-G with cylinder switch SRL3-G-**-**-***-M*H*
JSG (Axial lead wire)
JSC3
USSD
USC
JSB3
CKD
M0H
CKD
M0H
LMB
STG 35.5
STS L PP HD 35.5 RD
LCS
LCG SRL3-G with cylinder switch SRL3-G-**-**-***-T*H(T*W, T*Y, T2YD)
LCM
LCT
LCY
STR2 CKD
T2YH
CKD
T2YH
UCA2
HCM PA
PP HD PB 3 RD
HCA
SRL3 SRL3-G with cylinder switch SRL3-G-**-**-***-T*V(T*W, T*Y)
SRG3
SRM3
SRT3
MRL2
T2YV
CKD CKD
T2YV
MRG2
SM-25 PA
HD PB HD
PP
CAC4
UCAC2
RD: Max. sensitive position HD: Max. sensitive position
RCC2
MFC Symbol
SHC A B C DB DC DD E G HA HB HC J KA L LL LA M P Q TA TB TC TD TE Y
Bore size (mm)
GLC ø25 53 17 53 20 26 19 14 40.5 7.5 20 18.9 24 81 190 192 2 M6 depth 9 162 Rc1/8 122 70 48 20 M5 depth 6 58 to 61
Ending ø32 66 18.5 57 32 27 21 15 43.5 10 23.5 21.5 28 98 226 228.5 2.5 M6 depth 9 196 Rc1/4 134 80 56 20 M6 depth 7.5 65 to 69
ø40 80 22 67 36 35 28 17 51.5 13 26 27 31 105 244 246.5 2.5 M8 depth 12 210 Rc1/4 148 90 68 30 M6 depth 9 77 to 81
ø50 96 28 82 45 35 35 23 61 15 33 35.3 39 106 258 260.5 2.5 M8 depth 12 212 Rc3/8 152 100 80 30 M8 depth 10.5 92 to 96
ø63 118 35 95 50 39 42 19 74 15 32 43 39 129 296 298.5 2.5 M10 depth 15 258 Rc3/8 168 110 102 40 M8 depth 11.5 114 to 118
Symbol With switch

PA
ø25 60 56 52 82 86 90 34.3 35 34 33.5 34.5 34.5 36 33 38.4 30.7 27.2
ø32 74 70 66 96 100 104 41.3 35 34 33.5 41.5 41.5 43 40 45.4 37.7 34.2
ø40 80 76 72 102 106 110 48.3 35 34 33.5 48.5 48.5 50 47 52.4 44.7 41.2
ø50 79 75 71 101 105 109 56.3 35 34 33.5 56.5 56.5 58 55 60.4 52.7 49.2
ø63 98 94 90 120 124 128 67.3 35 34 33.5 67.5 67.5 69 66 71.4 63.7 60.2
2028
SRL3-G Series
SCP*2
SRL3-G-LB-**-***with foot bracket (ø25 to ø63) CMK2
CMA2
SCM
SCG
SCA2
Y
SCS
4-ØXF
CKV2
CA/OV2
TF
C
SSD
CAT
SB VU 4-ØX UV MDC2
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
SRL3-G-LB1-**-***with foot bracket (ø25,ø32) JSG
JSC3
USSD
USC
JSB3
Y LMB
STG
STS L
C
LCS
TY
LCG
LCM
TG
SB V U 2-Q (plug) UV LCT

2-Q
4-ØX SA W + stroke length LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type

Bore size (mm)
SA SB TF U V W X XF SA SB TG TY U V W X
ø25 52 20 12 9 11 208 7 – 50 20 10 63 9 11 208 7
ø32 64 32 12 9 11 244 7 – 64 32 10 67 9 11 244 7
ø40 80 36 15 11 9 266 9 14 spot face depth 8.6 – – – – – – – –
ø50 94 45 20 11 9 280 9 14 spot face depth 8.6 – – – – – – – –
ø63 116 50 25 13 12 322 11 17.5 spot face depth 10.8 – – – – – – – –
2029
SRL3-G Series
SCP*2
CMK2 SRL3-G-**-**-***-M*V* (with cylinder switch)
CMA2 (Radial lead wire) Eye bolt for mounting
Tap TB 4-TE
SCM
4-S
SCG
TD
SCA2
SCS
ZA
CKV2
CA/OV2
SSD ZB
CAT Y L + stroke length
MDC2 TC J TA J
MVC HB HB
HA HA
SMD2 2-Q
MSD*
FC* F B
R
C
G
DE
DE
DC
STK
DD
B
ULK*
HC
HC
DF
JSK/M2 A HD 23.5 23.5 HD DA 2-Q (plug)
PP E KA Stroke length
JSG Q (plug)
P + stroke length
JSC3
E F F E
USSD 4-M R (plug)
ZD
USC
JSB3
D
LMB
DB
ZC
STG
D
L side R side
ZC
STS L
LCS
ZD
LCG SRL3-G-**-**-***-M*H* (with cylinder switch)
LCM (Axial lead wire)
LCT
LCY
STR2
UCA2
HCM 35.5
HCA PP HD 35.5 RD
SRL3 SRL3-G-**-**-***-T*H (T*W, T*Y, T2YD) with cylinder switch

SRG3
SRM3
SRT3
MRL2
MRG2
PA
SM-25 PP HD PB 3 RD
CAC4
UCAC2 SRL3-G-**-**-***-T*V (T*W, T*Y) with cylinder switch
RCC2
MFC
SHC
GLC RD: Max. sensitive position
HD: Max. sensitive position
Ending
PA HD PB RD
PP
Symbol
A B C DA DB DC DD DE DF E G HA HB HC J KA L M P Q R S TA TB
Bore size (mm)
ø80 162 49 130 64 93 58 38 65 33 42 106 30 59 64.5 70 208 500 M12 depth 18 416 Rc1/2 RC M12 depth 23 228 150
ø100 198 61.5 150 73 108 71.5 47.5 81.5 41.5 43 125 30 69 76.5 80 222 530 M12 depth 18 444 Rc1/2 RC M12 depth 23 238 160
Symbol With foot bracket

Bore size (mm) TC TD TE Y ZA ZB ZC ZD
SA SB TF U V W X
ø80 146 50 M12 depth 15 157 to 164 60 21 64 50 162 134 25 13 12 526 14
ø100 170 60 M12 depth 15 183 to 190 60 21 73 55 198 160 30 15 15 560 14
2030
SRL3-G Series
SRL3-G-LB-**-***with foot bracket CMK2
CMA2
SCM
SCG
SCA2
Y
SCS
CKV2
CA/OV2
TF
C
SSD
CAT
MDC2
SB 4-øX
V U U V MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
Symbol With switch

PA
ø80 170 165 161 190 195 199 87.3 35 34 33.5 87.5 87.5 89 86 91.4 83.7 80.2
ø100 175 170 166 195 200 204 105.3 35 34 33.5 105.5 105.5 107 104 109.4 101.7 98.2
2031
Rodless cylinder double acting/position locking
SCP*2
SRL3-Q Series
CMK2
Bore size ø: ø12, ø16, ø20, ø25, ø32
CMA2 ø40, ø50, ø63, ø80, ø100
SCM JIS symbol
SCG
SCA2
SCS
CKV2 Specifications
CA/OV2 Descriptions SRL3-Q
MDC2 Working fluid Compressed air
SMD2 Min. working pressure MPa 0.2 0.15 0.1 Note 1: (1)The speed of entry to the position
MSD* Withstanding pressure MPa 1.05 locking mechanism must not
Ambient temperature 5 to 60 exceed 500mm/s when operating
FC* at a speed of 500 to 2000mm/s.
STK Cylinder section M5 Rc1/8 Rc1/4 Rc3/8 Rc1/2 For common port pipe, working
Port size
ULK* Position locking unit M5 Rc1/8 piston speed varies depending on
+ 2.0 + 2.5 + 3.0 stroke length. Consult with CKD.
Stroke tolerance mm 0 (up to 1000) 0 (up to 3000) 0 (up to 5000)
JSK/M2 (2)For deceleration method, install an
Working piston speed mm/s 50 to 200 (standard port piping) (note 1) external shock absorber or a
JSG
Cushion Air cushion deceleration circuit etc..
JSC3 (3)Apply grease to sliding section of
Lubrication Not required (Use turbine oil Class 1 ISOVG32 if lubricated. Lubricate continuously if lubricated. )
USSD lock lever periodically.
Position locking mechanism Installation on guard R
USC
Holding force N Maximum thrust x 0.7
JSB3
LMB Allowable energy absorption Stroke length
STG Bore size Cushioned No cushion With shock absorber (initial setpoint) Bore size Standard stroke length Max. stroke length Min. stroke length
(mm) Allowable energy absorption (J) Cushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm) (mm) (mm) (mm) (mm)
STS L
LCS ø12 0.03 14.5 0.003 2.4 5.5 ø12
LCG ø16 0.22 19.2 0.007 2.4 5.5 ø16
LCM ø20 0.59 22.2 0.010 5.7 7 ø20
200,300
LCT ø25 1.40 20.9 0.015 10 9 ø25
400,500
LCY ø32 2.57 23.5 0.030 18 13 ø32
600,700 5000 1
STR2 ø40 4.27 23.9 0.050 50 16.5 ø40
800,900
UCA2 ø50 9.13 24.9 0.072 86 21 ø50
1000
HCM ø63 17.4 29.6 0.138 86 21 ø63
HCA ø80 40 45.8 0.393 143 25 ø80
SRL3 ø100 67 45.8 0.622 143 25 ø100
SRG3 M type switch quantity and min. stroke length (mm) ** The intermediate stroke can be manufactured in 1mm increments.
SRM3 Switch quantity 1 2 3 4 5 6
SRT3 Switch model no.
MRL2 Bore size (mm)
ø12 10 10 30 70 60 120 90 170 120 220 150 270
MRG2
ø16 10 10 30 70 60 120 90 170 120 220 150 270
SM-25 ø20 10 10 30 70 60 120 90 170 120 220 150 270
CAC4 ø25 10 10 30 70 60 120 90 170 120 220 150 270
UCAC2 ø32 10 10 30 45 60 90 90 135 120 180 150 225
ø40 10 10 30 45 60 90 90 135 120 180 150 225
RCC2
ø50 15 15 30 45 60 90 90 135 120 180 150 225
MFC ø63 15 15 30 45 60 90 90 135 120 180 150 225
SHC ø80 25 50 100 150 200 250
GLC ø100 25 50 100 150 200 250

Switch model no.
Bore size (mm)
ø12 5 5 45 70 85 120 125 170 165 220 205 270
ø16 5 5 45 70 85 120 125 170 165 220 205 270
ø20 5 5 45 70 85 120 125 170 165 220 205 270
ø25 10 10 45 70 85 120 125 170 165 220 205 270
ø32 10 10 45 50 85 100 125 150 165 200 205 250
ø40 10 10 45 50 85 100 125 150 165 200 205 250
ø50 10 10 45 50 85 100 125 150 165 200 205 250
ø63 10 10 45 50 85 100 125 150 165 200 205 250
ø80 15 15 45 50 85 100 125 150 165 200 205 250
ø100 15 15 45 50 85 100 125 150 165 200 205 250
Always safety precautions before starting use With position locking function Read pages 2001 the to 2003.
2032
SRL3-Q Series
Specifications
CMK2
M2V and M2H M3H/M3V M3WV CMA2
SCM
Applications PLC only PLC, relay, IC circuit or small solenoid valve
SCG
Power voltage – 4.5 to 28 VDC 10 to 28 VDC SCA2
Load voltage 10 to 30 VDC 30 VDC or less SCS
Load current 5 to 30mA 200mA or less 100mA or less 150mA or less CKV2
Light LED (ON lighting) Red/green LED (ON lighting) LED (ON lighting) Yellow LED (ON lighting) Red/green LED (ON lighting) CA/OV2
Leakage current 1mA or less 10µA or less 0.05mA or less 10µA or less SSD
Reed 2 wire CAT
Descriptions
M0V and M0H M5V and M5H MDC2
Applications PLC, relay PLC, relay, IC circuit (w/o lamp), serial connection MVC
SMD2
MSD*
FC*
0mA STK
Leakage current
ULK*
Note 2: Refer to Ending 1 for other switch specifications. JSK/M2
JSG
JSC3
Switch specifications (T type switch)
2 Color indicator type USSD
Proximity 2 wire Proximity 3 wire USC
Descriptions
T2YH/T2YV T2WH/T2WV T3YH/T3YV T3WH/T3WV JSB3
Applications PLC only PLC, relay LMB
Output method – NPN output NPN output STG
Power voltage – 10 to 28 VDC STS L
Load voltage 10 to 30 VDC 24 VDC ±10% 30 VDC or less LCS
Load current 5 to 20mA 50mA or less
LCG
Red/green Red/green Red/green Red/green
LCM
Light LED LED LED LED
LCT
Leakage current 1mA or less 10µA or less LCY
STR2
Strong magnetic field proof UCA2
Proximity 2 wire HCM
Descriptions
T2YD and T2YDT HCA
Applications PLC SRL3
Light Red/green LED (ON lighting) SRG3
Load voltage 24 VDC ±10% SRM3
Load current 5 to 20mA SRT3
Internal voltage drop 6V or less MRL2
Leakage current 1.0mA or less MRG2
SM-25
CAC4
Cylinder weight Unit: kg
UCAC2
ø12 0.38 0.25 0.26 0.10
GLC
ø16 0.47 0.33 0.35 0.13
ø20 0.74 0.54 0.58 0.18 Ending
ø25 1.5 1.6 1.1 0.28
Rodless cylinder
Rodless type
ø32 2.4 2.5 1.7 0.36

0.02
ø40 3.6 3.7 – 0.53
ø50 6.0 6.1 – 0.75
ø63 8.8 9.1 – 1.11
ø80 22.4 23.0 – 2.32
ø100 30.5 31.5 – 3.38
2033
SRL3-Q Series
A Mounting style
CMK2 Without switch
00 Basic type
CMA2 SRL3-Q 00 12 B 200 B LB Axial foot type
SCG B Bore size (mm)
SRL3-Q 00 12 B 200 M0H R B
SCA2 12 ø12
SCS 16 ø16
20 ø20
CKV2 A Mounting style
25 ø25
CA/OV2 Note 1
32 ø32
SSD B Bore size 40 ø40
CAT 50 ø50
MDC2 63 ø63
80 ø80
MVC
100 ø100
SMD2
C Port thread type
MSD* C Port thread type
Blank Rc thread
ULK* D Cushion
JSK/M2 D Cushion B Both sides cushioned
L L side cushioned
JSC3
N No cushion
USSD
USC
Note on model no. selection E Stroke length
Note 1: If Option "R" and "T" is selected Bore size Stroke length Note 2 Custom stroke length
JSB3 for bore size12, 16, 20, 25, or 30, ø12 to ø100 1 to 5000 By 1 mm increment
LMB the support type will be "00" or "LB1" F Switch model no.
STG (Option "R" and "T" with "LB" support F Switch model no.
Contact Reed
is not available since it can not be piped)
Lead wire Lead wire Lead
Note 3 Indicator
STS L Note 2: Refer to page 2032 for minimum stroke with switch. Axial Radial wire
LCS Note 3: Switches not listed on option F are also available. M0H* M0V* 1 color indicator type
(custom order) Refer to Ending 1 for details. M5H* M5V* Without indicator light 2-wire
LCG
Note 4: Adjustable full-stroke bracket on the R side M2H* M2V* 1 color indicator type
LCM provided as standard for position locking models.. – M2WV* 2 color indicator type 2-wire
LCT Therefore, only a shock absorber will be added to the M3H* M3V* 1 color indicator type
R side when A1 is specified. If A is indicated,
LCY – M3WV* 2 color indicator type 3-wire
position locking, adjustable full stroke and shock
Proximity
STR2 absorber will be on the R side. (The following diagram) M3PH* M3PV* 1 color indicator type (custom order) 3-wire
T2WH* T2WV*
UCA2 SRL3-Q SRL3-Q: A both sides 2-wire
T2YH* T2YV*
HCM 2 color indicator type
T3WH* T3WV*
3-wire
HCA T3YH* T3YV*
SRL3-Q: A1 SRL3-Q: A2
SRL3 T2YD* – Strong magnetic field proof
2-wire
SRG3 T2YDT* – (AC magnetic field dedicated)
*Lead wire length
SRM3 Note 5: The asterisk (*) following L* and N* indicates the
Blank 1m (standard)
number of brakets. Indicate "L2" for LB and "N2"
SRT3 3 3m (option)
for LB1 when ordering 2 sets.
MRL2 2 pieces/1 set 5 5m (option)
MRG2 Note 6: Refer to dimensions on page 2026 to 2031for port G Switch quantity
and cushion needle position symbols. G Switch One on R side
SM-25 R
Note 7: Standard ø25 models needs to have its cover quantity
CAC4 removed and full stroke adjustment mounted using
L One on L side
a plate nut afterwards. "A3" is a option that will have D 2
UCAC2
a plate nut for mounting installed beforehand so that T 3
RCC2 it can be mounted afterwards without removing the cover. 4 4 pieces (fill in switch quantity if 4 or more switches are required.)
MFC Note 8: Thread size for ø12, ø16 will be "M4" and ø20 will H Option
be "M5" if "H" is selected. H Option
SHC Bore size (ø) 12 16 20 25 32 40 50 63 80 100
Note 9: Check the available combination of options on the Note 4, Note 5
GLC "Option combination table" on the next page. A Adjustable full-stroke both ends, with shock absorber
Note 6, Note 7
Note 10: Copper and PTFE free as standard Note 8, Note 9 A1 Adjustable full-stroke R end only, with shock absorber
Ending
Y Floating joint
SRL3-Q-00-12B-200-M0H-R-B Y1 Thin floating joint
Model: Rodless cylinder with position locking function L* Intermediate support bracket (00, LB)
A Mounting style : Basic type
H Table mounting thread size up
B Bore size : ø12mm U Height adjustment plate
C Port thread type : Rc thread Blank F (standard) F (standard)
Port position
D Cushion : Both sides cushioned R R (common port) F

E Stroke length : 200mm B F B
T R (common port) B
D D F
G Switch quantity : 1 on rod end S D D
H Option : Port position F, cushion needle position B X F (common port) F
2034
SM-25
MRG2
MDC2
JSK/M2
CMK2
CMA2
SMD2
USSD
STS L
SRM3
CA/OV2
SRG3
RCC2
UCAC2
UCA2
MRL2
CAC4
SCP*2
SCA2
CKV2
MSD*
STR2
SRL3
SRT3
Ending
JSC3
JSB3
ULK*
HCM
SCM
MVC
Rodless type
SCG
MFC
USC
LCM
HCA
SHC
SCS
SSD
LMB
STG
LCG
GLC
CAT
STK
JSG
LCS
LCY
LCT
FC*
Rodless cylinder
How to order
SRL3-Q Series
2035
Port position and cushion needle position F (common port)
Symbol A A1 A2 A3 Y Y1 L* N* H U Blank R B T D S X
Port position and cushion needle position D
Port position D and cushion needle position F
Port position R and cushion needle position B (common port)

Port position R and cushion needle position F (common port)
Port position and cushion needle position F (standard)
: Combination possible
Option


Thin type floating joint

Floating joint
Blank
A1
A2
A3
Y1
N*
L*
H
U
D
A
S
X
T
Option
SRL3-Q Series
SCP*2 How to order switch (Refer to pages 2053 to 2055 for parts configuration )
CMK2
CMA2
SCM
SCG
SRL3 M0H*
SCA2
SSD
MVC 3 3m (option)
SMD2 Switch model no. 5 5m (option)

MSD* "*" mark indicates length of lead wire.
FC* Mounting bracket (Note 2)
STK · M type switch · T type switch
ULK*
JSK/M2
SRL3 M SRL3 T
JSG
JSC3 Lead wire holder (Note 3)
USSD
USC
SRL3 MH
JSB3
Note 1: Lead wire holder is not included in the switch and its mounting bracket. When a lead wire holder is necessary, place an order separately.
STG Note 3: Lead wire holder comes in a set of 10 pieces. Discrete intermediate support bracket model no.
STS L LB
LCS
LCG SRL3 40 L (2 piece/1 set)
LCM Discrete shock absorber model no.
LCT Bore size
LCY SRL3 40 NCK (Page 2034 section B )
STR2 LB1
Bore size
UCA2
(Page 2034 section B ) SRL3 32 N (2 piece/1 set)
HCM
HCA (Square nut 1 pc., hex nut for fixing shock absorber 1pc.) Bore size
SRL3 (Page 2034 section B )
Square nut for shock absorber for SRL3-40 is a special design.
SRG3
SRM3 Adjustable full-stroke kit model no.
SRT3 Applicable shock absorber model No.
MRL2 Model Shock absorber model no. SRL3 40 A1 (1 set)
MRG2 SRL3-12 NCK-00-0.3-C
SM-25 SRL3-16 NCK-00-0.3-C Bore size
SRL3-20 NCK-00-0.7-C (Page 2034 section B )
CAC4
UCAC2 SRL3-25 NCK-00-1.2
Repair parts model no.
RCC2 SRL3-32 NCK-00-2.6
MFC SRL3-40
SRL3-50
NCK-00-7
NCK-00-12
SRL3-Q 40 K 200
SHC
SRL3-63 NCK-00-12
GLC Bore size Stroke length
SRL3-80 NCK-00-20 (Page 2034 section E )
Ending (Page 2034 section B )
SRL3-100 NCK-00-20
Floating joint set model no. A Mounting style
SRL3 40 Y (Bracket 2 piece and mounting bolt 4 pc.)
Bore size
Bore size
SRL3 40 U
(Mount, mount base, pin, plain washer, pan head machine screw with spring washer)
Bore size
2036
SRL3-Q Series
CMK2
CMA2
SCM
SCG
SCA2
SCS
1 2 5 13 12 3 7 8 9 10 11 6 4 14 15
CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
JSG
JSC3
USSD
USC
Parts list JSB3
No. Parts name Material Remarks No. Parts name Material Remarks LMB
1 Lock lever Alloy steel Chrome plating 9 C type snap ring for hole Steel STG
2 Hexagon socket head cap bolt Alloy steel Galvanizing 10 Gasket Nitrile rubber STS L
3 Stopper Steel Blackening 11 Rod cover Aluminum alloy Alumite LCS
4 Piston packing seal Nitrile rubber 12 Hexagon socket head cap bolt Alloy steel Galvanizing LCG
5 Adaptor Steel Galvanizing 13 Hexagon socket head cap bolt Alloy steel Galvanizing LCM
6 Rod packing seal Nitrile rubber 14 Spring Steel Electrodeposition coating LCT
7 Position locking unit Aluminum alloy Alumite 15 Square nut Alloy steel Blackening LCY
8 Lock pin (stopper piston) Alloy steel Chrome plating STR2
UCA2
Repair parts list HCM
Tube HCA
Bore size (mm) SRL3
SRG3
ø12 SRL3-Q-12K-* SRM3
SRT3
4 6 10 MRL2
ø16 SRL3-Q-16K-* MRG2
8 9 18
SM-25
21 22 26 CAC4
ø20 SRL3-Q-20K-* UCAC2
27 28
RCC2
MFC
ø25 SRL3-Q-25K-*
SHC
GLC
Note 1: Specify the kit no. when placing an order Specify stroke length for "*".
Note 2:Parts no. for 8 9 18 21 22 26 27 28 will be based accordingly to page 2009. Ending
Rodless cylinder
Rodless type
2037
SRL3-Q Series
SCP*2 Internal structure drawing and parts list (ø32 to ø63)
CMK2
CMA2
SCM
SCG
SCA2
SCS
CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC* 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
STK
ULK*
JSK/M2
JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
LCS
Parts list
LCG No. Parts name Material Remarks No. Parts name Material Remarks
LCM 1 Hexagon socket head cap bolt Alloy steel Galvanizing 10 Gasket Nitrile rubber
LCT 2 Lock lever Alloy steel Galvanizing 11 Position locking unit Aluminum alloy Alumite
3 Wear ring Polyacetal resin 12 Adaptor Steel Galvanizing
LCY
4 Piston packing seal Nitrile rubber 13 Hexagon socket head cap bolt Alloy steel Galvanizing
STR2
5 Spring Steel Electrodeposition coating 14 Hexagon socket head cap bolt Alloy steel Galvanizing
UCA2
6 Rod packing seal Nitrile rubber 15 Hexagon socket head set screw Alloy steel Galvanizing
HCM
7 Lock pin Alloy steel Chrome plating 16 Square nut Steel Galvanizing
HCA
8 Rod cover Aluminum alloy Alumite 17 Square nut Alloy steel Galvanizing
SRL3
9 C type snap ring for hole Steel
SRG3
SRM3
Repair parts list
SRT3
Tube
MRL2 Kit No. Repair parts number
Bore size (mm)
MRG2
SM-25
ø32 SRL3-Q-32K-*
CAC4
UCAC2
3 4 6
RCC2 10 8 9
ø40 SRL3-Q-40K-*
MFC
18 21 22
SHC
GLC 26 27 28
ø50 SRL3-Q-50K-*
Ending
( 32 ) Note 3
ø63 SRL3-Q-63K-*
Note 1: Specify the kit no. when placing an order. Specify stroke length for "*".
Note 2: Parts no. for 8 9 18 21 22 26 27 28 32 will be based accordingly to page 2009 and 2010.
Note 3: 32 applies only to ø50 and ø60 equivalent models.
2038
SRL3-Q Series
CMK2
CMA2
SCM
SCG
SCA2
SCS
CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 FC*
18 STK
ULK*
JSK/M2
JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
Parts list LCS
No. Parts name Material Remarks No. Parts name Material Remarks LCG
1 Hexagon socket head cap bolt Alloy steel Galvanizing 10 Gasket Nitrile rubber LCM
2 Lock lever Alloy steel Galvanizing 11 Position locking unit Aluminum alloy Alumite LCT
3 Wear ring Polyacetal resin 12 Adaptor Steel Galvanizing
LCY
4 Piston packing seal Nitrile rubber 13 Hexagon socket head cap bolt Alloy steel Galvanizing
STR2
5 Spring Steel Electrodeposition coating 14 Hexagon socket head cap bolt Alloy steel Galvanizing
UCA2
6 Rod packing seal Nitrile rubber 15 Hexagon socket head set screw Alloy steel Galvanizing
HCM
7 Lock pin Alloy steel Chrome plating 16 Square nut Steel Galvanizing
HCA
8 Rod cover Aluminum alloy Alumite 17 Square nut Alloy steel Galvanizing
SRL3
9 C type snap ring for hole Steel 18 Conical spring washer Steel
SRG3
SRM3
Repair parts list
SRT3
Tube
Kit No. Repair parts number MRL2
Bore size (mm)
MRG2
3 4 6 10
SM-25
ø80 SRL3-Q-80K-*
8 9 18 21 CAC4
UCAC2
22 26 27 28
RCC2
ø100 SRL3-Q-100K-*
29 32 33 MFC
Note 1: Specify the kit no. when placing an order Specify stroke length for "*". SHC
Note 2: Parts no. for 8 9 18 21 22 26 27 28 29 32 33 will be based accordingly to page 2011. GLC
Ending
Rodless cylinder
Rodless type
2039
SRL3-Q Series
Note 1: Please refer to pages 2012 to 2015 for dimensions not shown below.
SCP*2 Dimensions (ø12 to ø25) Note 2: Refer to pages 2048 to 2052 for dimensions with options and dimensions of accessories.
CMK2 SRL3-Q
CMA2 QF
SCM QB QC QH QG QP
QN
QM
QA QD QE
SCG
SCA2
QL
SCS 2-plug
QJ
CKV2
QK
CA/OV2
SSD
CAT J
MDC2 L side R side

MVC
SMD2 SRL3-Q with foot bracket SRL3-Q-LB1-**-***
MSD*
FC*
STK
QQ
ULK*
JSK/M2
JSG
JSC3
USSD
USC Symbol
JSB3 J QA QB QC QD QE QF QG QH QJ QK QL QM QN QP QQ
Bore size (mm)
LMB
ø12 0 45 19 46 2.5 25 27.5 1 4 40 21.5 12.5 7 9.5 M5 46
STG
STS L ø16 0 49 19 52 2.5 28 29.5 1 4 42 25 12 7 9.5 M5 48
LCS ø20 -1 57 24 53 2.5 31 33.5 1 4 48 29 13 8 10.5 1
Rc /8 56
LCG
1
LCM ø25 5.5 77 26 67.5 2.5 37 43.5 1 4 62.5 36 17 8 10.5 Rc /8 72.5
LCT
Note 1: Refer to pages 2014, 2015 for dimensions not shown below.
LCY Dimensions (ø32 to ø63) Note 2: Refer to pages 2048 to 2052 for dimensions with options and dimensions of accessories.
STR2
SRL3-Q
UCA2 QA
HCM QF QW J
QP SC
QS QD
HCA QE
QH
SRL3
SRG3
QG
QL
SRM3
QM
QJ
SRT3
QK
QR
MRL2
QN
MRG2
QX QV QU
SM-25
CAC4 L side R side
UCAC2 SRL3-Q-LB1-32-***with foot bracket
RCC2
MFC
SHC
GLC
QQ
Ending
Symbol
J QA QD QE QF QG QH QJ QK QL QM QN QP QQ QR QS QU QV QW QX SC
Bore size (mm)
ø32 19.5 98 7 6 65 2 4 66.5 28 27.5 18 13 Rc1/8 88.5 23.5 29 21 84 76 26 22
1
ø40 11.5 112 7 11 72 2 4 78.5 34 27.5 18 13 Rc /8 – 31.5 29 27 84 87 26 32
1
ø50 9.5 136 8 9 84 2 5 99 40 33 21.5 15 Rc /8 – 42 36 12.5 100 102 30 38
ø63 20.5 158 8 14 95 2 5 112 50 33 21.5 15 Rc1/8 – 55 36 31.5 100 91 30 38
2040
SRL3-Q Series
Double acting/position locking
Note 1: Refer to pages 2016, 2017 for dimensions not shown below.
Dimensions (ø80, ø100) Note 2: Refer to pages 2048 to 2052 for dimensions with options and dimensions of accessories. SCP*2
SRL3-Q CMK2
CMA2
SCM
QA
QF SCG
J
QS QP QW SCA2
QD
QC QE SCS
QH
CKV2
QG CA/OV2
QL
QJ
SSD
QM
QR
QK
CAT
QN MDC2
QX
QV QU MVC
SMD2
L side R side
MSD*
FC*
Symbol STK
J QA QC QD QE QF QG QH QJ QK QL QM QN QP QR QS QU QV QW QX ULK*
Bore size (mm)
ø80 70 214 50 6 14 133 2 7 145 69 47.5 29 20 1
Rc /8 73.5 48 62 143 60 40 JSK/M2
JSG
ø100 80 250 50 6 14 145 2 7 164 88 47.5 29 20 Rc1/8 92.5 48 62 148 60 40 JSC3
USSD
USC
JSB3
LMB
STG
STS L
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
2041
Rodless cylinder double acting/position locking/resin guide
SCP*2
SRL3-GQ Series
CMK2
Bore size ø: ø12, ø16, ø20, ø25, ø32
CMA2 ø40, ø50, ø63, ø80, ø100
SCM JIS symbol
SCG
SCA2
SCS
CKV2 Specifications
CA/OV2 Descriptions SRL3-GQ
MDC2 Specifications fluid Compressed air
SMD2 Min. working pressure MPa 0.25 0.15 0.1
Note 1: (1)The speed of entry to the position
MSD* Withstanding pressure MPa 1.05 locking mechanism must not
FC* Ambient temperature 5 to 60 exceed 500mm/s when operating
at a speed of 500 to 2000mm/s.
STK Cylinder section M5 Rc1/8 Rc1/4 Rc3/8 Rc1/2
Port size For common port pipe, working
ULK* Position locking unit M5 Rc1/8 piston speed varies depending on
+ 2.0 + 2.5 + 3.0
JSK/M2 Stroke tolerance mm 0 (up to 1000) 0 (up to 3000) 0 (up to 5000) stroke length. Consult with CKD.
Working piston speed mm/s 50 to 2000 (standard port piping)(note 1) (2)Install an external shock absorber
JSG or a deceleration circuit etc. for
Cushion Air cushion deceleration.
JSC3
Lubrication Not required (use turbine oil Class 1 ISOVG32 if lubricated. Lubricate continuously if lubricated.) (3)Apply grease to sliding section of
USSD lock lever periodically.
Position locking mechanism Installed on R side of cover.
USC
Holding force N Maximum thrust x 0.7
JSB3
LMB Allowable energy absorption Stroke length
STG Bore size Cushioned No cushion With shock absorber (initial setpoint) Bore size Standard stroke length Max. stroke length Min. stroke length
(mm) Allowable energy absorption (J) Cushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm) (mm) (mm) (mm) (mm)
STS L
LCS ø12 0.03 14.5 0.003 2.4 5.5 ø12
LCG ø16 0.22 19.2 0.007 2.4 5.5 ø16
LCM ø20 0.59 22.2 0.010 5.7 7 ø20
200, 300
LCT ø25 1.40 20.9 0.015 10 9 ø25
400, 500
LCY ø32 2.57 23.5 0.030 18 13 ø32
600, 700 5000 1
STR2 ø40 4.27 23.9 0.050 50 16.5 ø40
800, 900
UCA2 ø50 9.13 24.9 0.072 86 21 ø50
1000
HCM ø63 17.4 29.6 0.138 86 21 ø63
HCA ø80 40 45.8 0.393 143 25 ø80
SRL3 ø100 67 45.8 0.622 143 25 ø100
SRG3 M type switch quantity and min. stroke length (mm) ** The intermediate stroke can be manufactured in 1 mm increments.
SRM3 Switch quantity 1 2 3 4 5 6
SRT3 Switch model no.
Bore size (mm)
MRL2
ø12 10 10 30 70 60 120 90 170 120 220 150 270
MRG2 ø16 10 10 30 70 60 120 90 170 120 220 150 270
SM-25 ø20 10 10 30 70 60 120 90 170 120 220 150 270
CAC4 ø25 10 10 30 70 60 120 90 170 120 220 150 270
UCAC2 ø32 10 10 30 45 60 90 90 135 120 180 150 225
ø40 10 10 30 45 60 90 90 135 120 180 150 225
RCC2
ø50 15 15 30 45 60 90 90 135 120 180 150 225
MFC ø63 15 15 30 45 60 90 90 135 120 180 150 225
SHC ø80 25 50 100 150 200 250
GLC ø100 25 50 100 150 200 250

Switch model no.
Bore size (mm)
ø12 5 5 45 70 85 120 125 170 165 220 205 270
ø16 5 5 45 70 85 120 125 170 165 220 205 270
ø20 5 5 45 70 85 120 125 170 165 220 205 270
ø25 10 10 45 70 85 120 125 170 165 220 205 270
ø32 10 10 45 50 85 100 125 150 165 200 205 250
ø40 10 10 45 50 85 100 125 150 165 200 205 250
ø50 10 10 45 50 85 100 125 150 165 200 205 250
ø63 10 10 45 50 85 100 125 150 165 200 205 250
ø80 15 15 45 50 85 100 125 150 165 200 205 250
ø100 15 15 45 50 85 100 125 150 165 200 205 250
Always read safety precautions on With position locking function pages 2001 to 2003 before use.
2042
SRL3-GQ Series
Specifications
(1) Color/2 color indicator CMK2
SCG
SCA2
Reed 2 wire MDC2
Descriptions
MSD*
FC*
STK
Leakage current 0mA ULK*
JSK/M2
Note 2: Refer to Ending 1 for other switch specifications. JSG
JSC3
Switch specifications (T type switch) USSD
2 Color indicator type USC
Descriptions JSB3
LMB
Applications PLC PLC, relay
STG
Output method – NPN output NPN output
Power voltage – 10 to 28 VDC STS L
Load voltage 10 to 30 VDC 24 VDC ±10% 30 VDC or less LCS
Load current 5 to 20mA (Note 1) 50mA or less LCG
Red/green Red/green Red/green Red/green LCM
Light LED LED LED LED LCT
(ON lighting) (ON lighting) (ON lighting) (ON lighting) LCY
Leakage current 1mA or less 10µA or less STR2
UCA2
Strong magnetic field proof HCM
Proximity 2 wire HCA
Descriptions
T2YD and T2YDT SRL3
Applications PLC SRG3
Light Red/green LED (ON lighting) SRM3
Load voltage 24 VDC ±10% SRT3
Load current 5 to 20mA MRL2
Internal voltage drop 6V or less MRG2
CAC4
Cylinder weight Unit: kg UCAC2
ø12 0.38 0.25 0.26 0.10 GLC
ø16 0.47 0.33 0.35 0.13 Ending
ø20 0.74 0.54 0.58 0.18
Rodless cylinder
Rodless type
ø25 1.5 1.6 1.1 0.28

ø32 2.4 2.5 1.7 0.36
0.02
ø40 3.6 3.7 – 0.53
ø50 6.0 6.1 – 0.75
ø63 8.8 9.1 – 1.11
ø80 22.4 23.0 – 2.32
ø100 30.5 31.5 – 3.38
2043
SRL3-GQ Series
SCP*2
How to order Symbol Descriptions
A Mounting style
CMK2 Without switch
00 Basic type
CMA2 SRL3-GQ 00 12 B 200 B LB Axial foot type
SCG
12 B 200 R B B Bore size (mm)
SRL3-GQ 00 M0H 12 ø12
SCA2
SCS 16 ø16
20 ø20
CKV2 A Mounting style
25 ø25
CA/OV2 Note 1
32 ø32
B Bore size
SSD 40 ø40
CAT 50 ø50
MDC2 63 ø63
80 ø80
MVC C Port thread type 100 ø100
SMD2 C Port thread type
MSD* Blank Rc thread
ULK* D Cushion
D Cushion B Both sides cushioned
JSK/M2
L L side cushioned
JSC3
N No cushion
USSD
USC E Stroke length
Note on model no. selection Bore size Stroke length Note 2 Custom stroke length
Note 1: If Option "R" and "T" is selected for bore
LMB size 12, 16, 20, 25, or 30, the support type Switch model no.
F
will be "00" or "LB1" F Switch model no.
Contact Reed
STG Lead wire Lead wire Lead
("LB" can not be piped for options "R" and Note 3 Indicator
STS L Axial Radial wire
"T", thus unavailable. )
LCS Note 2: Refer to page 2042 for minimal stroke with models M0H* M0V* 1 color indicator type
with switches. M5H* M5V* Without indicator light 2-wire
LCG
Note 3: F Switches not listed on this page are also available. M2H* M2V* 1 color indicator type
LCM (custom order) Refer to Ending 1 for details. – M2WV* 2 color indicator type 2-wire
LCT Note 4: Adjustable full-stroke bracket on the R side is as M3H* M3V* 1 color indicator type
standard part of position locking. When A1 is indicated, – M3WV* 2 color indicator type 3-wire
LCY
Proximity
a shock absorber is only added to R side. If A is indicated, M3PH* M3PV* 1 color indicator type (custom order) 3-wire
STR2 position locking, adjustable full stroke and shock
T2WH* T2WV*
UCA2 absorber will be on the R side. (The following diagram) 2-wire
HCM SRL3-Q SRL3-Q: A both sides T3WH* T3WV*
3-wire
HCA T3YH* T3YV*
SRL3 T2YD* – Strong magnetic field proof
SRL3-Q: A1 SRL3-Q: A2 2-wire
T2YDT* – (AC magnetic field dedicated)
SRG3
*Lead wire length
Note 5: The asterisk (*) following L* and N* indicates the number
SRT3 3 3m (option)
of brakets. Indicate "L2" for LB and "N2" for LB1 when
MRL2 ordering 2 sets. 2 pieces/1 set 5 5m (option)
and cushion needle position symbols. G Switch quantity
SM-25 R One on R side
Note 7: Standard ø25 models needs to have its cover removed L One on L side
CAC4 and full stroke adjustment mounted using a plate nut afterwards.
"A3" is a option that will have a plate nut for
D 2
UCAC2 T 3
mounting installed beforehand so that it can be
RCC2 mounted afterwards without removing the cover. 4 4 pieces (fill in switch quantity if 4 or more switches are required.)
MFC Note 8: Thread size for ø12, ø16 will be "M4" and ø20 H Option
SHC will be "M5" if "H" is selected. H Option 12 16 20 25 32 40 50 63 80 100
Bore size (ø)
Note 9: Check the available combination of options on Note 4, Note 5
GLC the "Option combination table" on the next page.
A Adjustable full-stroke both ends, with shock absorber
Note 6, Note 7
Note 10: Copper and PTFE free as standard Note 8 A1 Adjustable full-stroke R end only, with shock absorber
Ending A2 Adjustable full-stroke L end only, with shock absorber
A3 Adjustable full-stroke bracket retrofitting
<Example of model number> L* Intermediate support bracket (00, LB)
SRL3-GQ-00-12B-200-M0H-R-B N* With intermediate support bracket (LB1)
H Table mounting thread size up
Model: Rodless cylinder Resin guide type· with position locking function U Height adjustment plate
A Mounting style : Basic type Blank F (standard) F (standard)

Port position
B Bore size : ø12mm R R (common port) F

C Port thread type : RC screw B F B
T R (common port) B
D Cushion : Both sides cushioned
D D F
E Stroke length : 200mm S D D
F Switch model no. : Reed switch M0H and lead wire 1m X F (common port) F
G Switch quantity : 1 on rod end
H Option : Port position F, cushion needle position B
2044
SM-25
MRG2
MDC2
JSK/M2
CMK2
CMA2
SMD2
USSD
STS L
SRM3
CA/OV2
SRG3
RCC2
UCAC2
UCA2
MRL2
CAC4
SCP*2
SCA2
CKV2
MSD*
STR2
SRL3
SRT3
Ending
JSC3
JSB3
ULK*
HCM
SCM
MVC
Rodless type
SCG
MFC
USC
LCM
HCA
SHC
SCS
SSD
LMB
STG
LCG
GLC
CAT
STK
JSG
LCS
LCY
LCT
FC*
Rodless cylinder
How to order
SRL3-GQ Series
2045
Port position F, cushion needle position F (common port)
Symbol A A1 A2 A3 L* N* H U Blank R B T D S X

: Combination available

Option


Adjustable full-stroke both sides and shock absorbers
Blank
A1
A2
A3
N*
L*
H
U
D
A
S
X
T
Option
SRL3-GQ Series
SCP*2 How to order switch (Refer to page 2053 to 2055 for parts configuration )
CMK2
CMA2
SCM
SCG
SRL3 M0H*
SCA2
SSD
MVC 3 3m (option)
SMD2 Switch model no. 5 5m (option)

(Page 2044 section F ) "*" mark indicates length of lead wire.
MSD*
FC* Mounting bracket (Note 2)
STK
· M type switch · T type switch
ULK*
JSK/M2
SRL3 M SRL3 T Note: M type switch bracket different from T type switch.
JSG
JSC3 Lead wire holder (Note 3)
USSD
USC
SRL3 MH
JSB3
Note 1: Lead wire holder is not included in the switch and its mounting bracket. When a lead wire holder is necessary, place an order separately.
STG Note 3: Lead wire holder comes in a set of 10 pieces.
STS L
LCS Discrete intermediate support bracket model no.
LCG LB
LCM Discrete shock absorber model no.
LCT
SRL3 40 L (2 piece/1 set)
LCY SRL3 40 NCK Bore size
STR2 (Page 2044 section B )
Bore size
UCA2 (Page 2044 section B ) LB1
HCM
HCA (Square nut 1 pc., hex nut for fixing shock absorber 1pc.) SRL3 32 N (2 piece/1 set)
SRL3
Square nut for shock absorber for SRL3-40 is a special design. Bore size
SRG3
SRM3
SRT3 Applicable shock absorber model No.
Adjustable full-stroke kit model no.
MRL2 Model Shock absorber model no.
MRG2 SRL3-12 NCK-00-0.3-C SRL3 40 A1 (1 set)
SM-25 SRL3-16 NCK-00-0.3-C
CAC4 SRL3-20 NCK-00-0.7-C Bore size

SRL3-25 NCK-00-1.2 (Page 2044 section B )
UCAC2
SRL3-32 NCK-00-2.6 Repair parts model no.
RCC2
SRL3-40 NCK-00-7
MFC
SHC
SRL3-50 NCK-00-12 SRL3-GQ 40 K 200
SRL3-63 NCK-00-12
GLC
SRL3-80 NCK-00-20 Bore size Stroke length
Ending SRL3-100 NCK-00-20 (Page 2044 section B ) (Page 2044 section E )

A Mounting style
(Bracket 2 piece and mounting bolt 4 pc.)
Bore size
SRL3 40 U
Bore size
2046
SRL3-GQ Series
Parts list
CMK2
CMA2
Refer to the following for internal structure and parts list SCM
SRL3 Series: 2009 to 2011 SCG
SCA2
SRL3-G Series: 2023 to 2025
SCS
SRL3-Q Series : 2037 to 2039 CKV2
CA/OV2
SSD
CAT
Repair parts list
MDC2
Tube
Kit No. Repair parts number MVC
Bore size (mm)
SMD2
ø12 SRL3-GQ-12K-* MSD*
8 9 18 21 22 26 4 6 10 1 5
FC*
27
ø16 SRL3-GQ-16K-* STK
(Based on parts no. on page 2009 ) (Based on parts no. on page 2037 ) (Based on parts no. on page 2023 )
ULK*
ø20 SRL3-GQ-20K-* JSK/M2
JSG
ø25 SRL3-GQ-25K-*
JSC3
USSD
ø32 SRL3-GQ-32K-* 8 9 18 21 22 26 3 4 6 10 1 5
USC
27 JSB3
ø40 SRL3-GQ-40K-* (Based on parts no. on page 2023 )
(Based on parts no. on page 2009 ) (Based on parts no. on page 2038 ) LMB
STG
ø50 SRL3-GQ-50K-* 8 9 18 21 22 26 3 4 6 10 1 5
STS L
27 32 LCS
ø63 SRL3-GQ-63K-*
(Based on parts no. on page 2010 ) (Based on parts no. on page 2038 ) (Based on parts no. on page 2024 ) LCG
1 LCM
ø80 SRL3-GQ-80K-* 8 9 18 21 22 26 3 4 6 10
LCT
27 28 29 32 33
LCY
ø100 SRL3-GQ-100K-*
(Based on parts no. on page 2011 ) (Based on parts no. on page 2039 ) (Based on parts no. on page 2025 ) STR2
UCA2
HCM
Dimensions HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
SRL3 Series pages 2012 to 2017 CAC4
SRL3-G Series pages 2026 to 2031 UCAC2
RCC2
SRL3-Q Series pages 2040 to 2041
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
2047
SRL3 Series
SCP*2 SRL3 series common dimensions: Options (ø12 to ø25)
CMK2 Adjustable full-stroke with shock absorber (SRL3)
CMA2
SCM
SCG SM SN
Nut width across flats SG L + stroke length SG Nut width across flats
SCA2
SCS SK SC SD SD SC
SH
SR ST SP
CKV2
CA/OV2
C
SSD
CAT
SE
SF
SQ
MDC2
MVC
SMD2
SJ SJ
MSD*
FC* L side R side
STK
ULK* Symbol SG SH
JSK/M2 SC SD SE SF SJ SK SM SN SP SQ SR ST C L
Bore size (mm) MAX MIN Adjustment
depth Screw diameter
Maximum energy absorption
J
JSG
JSC3 ø12 19.5 2.5 40 32 17.5 7.5 10 M8 x 0.75 3 25 45 12 5.5 M3 30.5 6 3 33 136
USSD
USC
JSB3 ø16 18 4 42 35 14.5 4.5 10 M8 x 0.75 3 25 49 12 5.5 M3 34 6 4 37 149
LMB
STG ø20 22.5 3.5 48 40 14.5 4.5 10 M10 x 1.0 7 39 57 14 7 M4 38 8 5 42 169
STS L
LCS
ø25 20 2.5 62.5 51.5 14.5 4.5 10 M12 x 1.0 12 50 77 17 10 M6 50 12 10 53 190
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
2048
SRL3 Series
SRL3 Series option dimensions
SRL3 series common dimensions: Options (ø32 to ø63) SCP*2
Adjustable full-stroke with shock absorber (SRL3) CMK2
CMA2
SCM
SCG
SM
Nut width across flats SN SCA2
SK SG L + stroke length SG Nut width across flats SCS
SR ST SH SC SD SD SC SP CKV2
CA/OV2
C
SSD
CAT
SE
SQ
SF
MDC2
MVC
SJ SJ SMD2
MSD*
L side R side
FC*
STK
Symbol SG SH ULK*
SC SD SE SF SJ SK SM SN SP SQ SR ST C L JSK/M2
J JSG
ø32 22 7 66.5 55.5 27 17 10 M14 x 1.5 26 46 98 19 13 M8 53.5 14 12 57 226 JSC3

USSD
USC
ø40 32 7 78.5 65.5 34 24 10 M20 x 1.5 70 51 112 24 17 M10 63.5 17 12 67 244 JSB3
LMB
ø50 38 8 99 80 55 45 10 M25 x 1.5 120 53 136 32 19 M12 77.5 22 17 82 258 STG
STS L
LCS
ø63 38 8 112 93.5 44 34 10 M25 x 1.5 120 64 158 32 24 M16 89 25 20 95 296
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
2049
SRL3 Series
SCP*2 SRL3 series common dimensions: Options (ø80 to ø100)
CMK2 Adjustable full-stroke with shock absorber
CMA2
SCM
SCG
SCA2 SM
Nut width across flats SN
SCS Nut width across flats
SK L + stroke length
CKV2 SP
SR ST SH SG SC SD SD SC SG
CA/OV2
C
SSD
CAT
SE
MDC2
SQ
SF
MVC
SMD2
MSD*
L side R side
FC*
STK
ULK* Symbol SG SH
JSK/M2 SC SD SE SF SK SM SN SP SQ SR ST C L
J
JSG
JSC3 ø80 60 6 145 125.5 50 40 10 M27 x 1.5 214 32 27 M20 123 20 20 130 500
200
USSD
USC
JSB3 ø100 60 6 164 144.5 50 40 10 M27 x 1.5 200 250 32 27 M20 142 20 20 150 530
LMB
STG
STS L
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
2050
SRL3 Series
SRL3 Series option dimensions
SRL3 series common dimensions: Options SCP*2
CMK2
Thin floating joint (Y1) ø12 to ø63.
CMA2
SCM
GK (moving range)
SCG
Y K (moving range)
D SCA2
N min. E
SCS
F
V P V CKV2
øC T T
CA/OV2
SSD
CAT
H
U
MDC2
M min.
R
J MVC
SMD2
MSD*
(Hook installed outwards) S Hook FC*

Material: Steel STK
Hook
FK (moving range)
Material: Steel ULK*

y K (moving range) JSK/M2
JSG
n min.
JSC3
V p V
USSD
Mount base (F) USC
Material: Steel
H
JSB3
Shaft
m min.
LMB
Material: Stainless steel
J STG
B
STS L
LCS
A LCG
LCM
(Hook installed inwards)
LCT
LCY
Symbol STR2
A B C D E F H J K FK GK M min. m min.N min. n min. P p R S V Y y T U
Port size UCA2
ø12 52 32 5 60 40 30 20 3 6 6 9 38 43 47.5 26.5 34 16 38.5 3.5 12 58 40 ø3.4 ø6.5 spot face depth 3.3
HCM
ø16 56 36.5 5 60 40 30 20 3 6 6 9 42 47 51.5 30.5 38 20 42.5 3.5 12 62 44 ø3.4 ø6.5 spot face depth 3.3
ø20 64 41 6 84 56 40 24.5 4 6 6 9 48.5 56.5 62 34 44 22 48.5 4 15 74 52 ø4.5 ø8 spot face depth 4.4 HCA
ø25 74 53 6 84 56 40 24.5 4 6 6 9 60.5 68.5 72 44 54 32 60.5 4 15 84 62 ø5.5 ø9.5 spot face depth 5.4 SRL3
ø32 99 56.5 8 106 70 50 34 6 10 10 15 66 75.5 92 54 67 39 66.5 5.5 20 107 79 ø6.6 ø11 spot face depth 6.5 SRG3
ø40 113 66 10 116 70 50 34 6 10 10 15 76 85.5 106 68 81 53 76.5 7 20 121 93 ø6.6 ø11 spot face depth 6.5 SRM3
ø50 133 81 12 120 90 70 43 8 10 10 15 93 106 129 81 97 63 93.5 8.5 25 147 113 ø9 ø14 spot face depth 8.6 SRT3
ø63 155 94 14 136 90 70 43 8 10 10 15 107 120 151 103 119 85 107 10 25 169 135 ø9 ø14 spot face depth 8.6
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
Height adjustment plate (U) Material: Aluminum alloy
MFC
Symbol SHC
A B C D E F G H GLC
A G Port size
B H ø12 80 42 29 16 30 13 4-M3 penetrating 8 Ending
ø16 87 48 32 16 30 15 4-M3 penetrating 6
Rodless cylinder
Rodless type
ø20 99 60 38 20 40 18 4-M4 penetrating 7

ø25 121 70 48 20 40 20 4-M5 penetrating 10.5
ø32 134 80 56 30 50 20 4-M6 penetrating 10.5
F
C
D
ø40 147 90 68 30 50 30 4-M6 penetrating 12.5

ø50 151 100 80 40 70 30 4-M8 penetrating 18
ø63 167 110 102 40 70 40 4-M8 penetrating 18
E ø80 227 150 146 50 90 50 4-M12 penetrating 18
ø100 237 160 170 60 110 60 4-M12 penetrating 18
2051
SRL3 Series
SCP*2 SRL3 series common dimensions: Options
CMK2 Floating joint (Y) material: Steel
CMA2 Moving range (single)
SCM FJ FD 4-øFI FG
SCG FE FF
FH
FK
SCA2
SCS
FK
FB
CKV2
CA/OV2
FA
FC
SSD
CAT
C
MDC2
B
MVC
SMD2
MSD* Symbol Symbol
FA FB FC FD FE FF FG FH FI FJ FK B C FA FB FC FD FE FF FG FH FI FJ FK B C
FC* Bore size (mm) Bore size (mm)
STK ø12 54 21 31.5 24 16 30 40 3 3.4 3 3 10.5 33 ø40 105 38 62 45 30 50 70 6 7 5 5 22 67
ø16 58 21 34 24 16 30 40 3 3.4 3 3 12 37 ø50 126 44 73 60 40 70 90 8 9 5 5 28 82
ULK*
ø20 67 25 39 30 20 40 56 4 4.5 3 3 14 42 ø63 139 44 79 60 40 70 90 8 9 5 5 35 95
JSK/M2 ø25 ø80
78 25 47 30 20 40 56 4 6 3 3 17 53 188 58 107 80 50 90 120 11 14 10 5 49 130
JSG ø32 95 38 55.5 45 30 50 70 6 7 5 5 18.5 57 ø100 220 70 120.5 90 60 110 140 13 14 10 5 61.5 150
JSC3
USSD Intermediate support bracket (L*N*) material: Aluminum alloy
USC (This bracket is for preventing deflection )
JSB3
LMB
STG L* (LB)
STS L
LCS
CD
CE
LCG
LCM
CA CF
LCT
4-øCH
CB CG
LCY
CC
STR2
UCA2
HCM Symbol
CA CB CC CD CE CF CG CH CJ N* (LB1)
HCA Bore size (mm)
SRL3 ø12 38 52 60 3 11 16 30 4 6
ø16 42 56 64 3 12 20 35 4 6
SRG3
ø20 49 64 75 4 14 20 38 5 8
SRM3 ø25 60 76 88 6 19.5 20 40 7 10
SRT3 ø32 74 88 100 6 21.5 20 40 7 10
CE
MRL2 ø40 90 108 124 6 24.5 30 60 9 –

ø50 106 124 140 8 30.5 30 60 9 –
CJ
MRG2
ø63 130 152 172 10 38.5 50 90 11 –
SM-25
ø80 172 210 236 12 32 60 110 14 –
CAC4 ø100 208 246 272 12 32 60 110 14 –
UCAC2 L* (for LB) N* (for LB1)
RCC2
MFC C mount bracket (C) material: Aluminum alloy
SHC CL CR
CK CQ 4-CS
GLC
CJ
Ending
CP
CM
CN
Symbol Symbol
CJ CK CL CM CN CP CQ CR CS CJ CK CL CM CN CP CQ CR CS
Bore size (mm) Bore size (mm)
ø12 13 27 40 22.5 50 5 42 81 M3 ø32 20 54 81.5 33.5 80 7 80 128 M6
ø16 15 35.5 50 29 60 6 48 88 M3 ø40 30 63 95.5 38 91.5 8 90 138 M6
ø20 18 32.5 50 26 60 6 60 100 M4 ø50 30 74 113 48 112.5 10 100 142 M8
ø25 20 45 69 28 71 5 70 116 M5 ø63 40 88 138 58 131 13 110 158 M8
2052
SRL3 Series
Configurations table
Switch SCP*2
CMK2
Switch body + mounting bracket (Note 1) Switch body Bracket
CMA2
SRL3 M0H* SW M0H* SRL3 M SCM
1 SCG
Switch model no. Switch model no. SCA2
2
(Page 2006 section F ) (Page 2006 section F ) SCS
3 CKV2
4 CA/OV2
1 1
SSD
Bracket CAT
2 2
MDC2
SRL3 T
3 3 1
MVC
2
SMD2
4 MSD*
3
FC*
5
4
STK
ULK*
JSK/M2
JSG
JSC3
USSD
No. Part name Quantity No. Part name Quantity No. Part name Quantity
USC
1 Plastic bag 1 1 Plastic bag 1 1 Plastic bag 1
2 Label 1 2 Label 1 2 Label 1 JSB3
3 Switch bracket 1 3 Switch 1 3 Switch bracket 1 LMB
4 Cross headed pan 1 4 Cross headed pan 1 STG
5 Switch 1 STS L
LCS
LCG
LCM
Switch C mount bracket LCT
LCY
Lead wire holder C mount bracket
STR2
SRL3 MH SRL3 40 C UCA2
HCM
Bore size HCA
1 2 3 (Page 2006 section B ) SRL3
C mount bracket + mounting bolt 4 pc. SRG3
5
SRM3
SRT3
MRL2
MRG2
1 2 3 4
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
No. Part name Quantity No. Part name Quantity

1 Lead wire holder 10 1 Package label (S) 1
2 Plastic bag 1 2 Plastic bag 1
3 Package label (S) 1 3 Hexagon socket head cap bolt 4
4 C mount 1
5 Air mat
Note: Packaging may slightly differ depending on the size.
2053
SRL3 Series
SCP*2 Repair parts Mounting bracket

CMK2
Repair parts Mounting bracket
CMA2
A Mounting style
SCM SRL3 40 K 200 SRL3 (LB.LB1) 40
SCG Bracket 2 piece + mounting bolt 4 pc.
1 Bore size
SCA2 Bore size Stroke length (Page 2006 section B )
SCS (Page 2006 section B ) (Page 2006 section E )
2
CKV2 11 3
CA/OV2 4
5
SSD 4
3
CAT
6
MDC2
MVC 13
12
SMD2 7 1
14 2
MSD* No. Part name Quantity
1 Plastic bag 1
FC* 8 No. Part name Quantity
2 Package label (S) 1
STK 1 Piston packing seal 2
3 Hexagon socket head cap bolt 4
ULK* 2 O ring P 2
4 Foot bracket (A) 2
3 Cushion packing seal 2
JSK/M2 1
9 4 Dust wiper 2
JSG 2
5 Plastic bag 1
3
JSC3 6 Seal belt 1 4
USSD 10 7 Air mat 1
USC 8 Dust-proof belt 1
JSB3 15 9 Plastic bag 1
10 Package label (L) 1
LMB
11 Instruction manual for repair parts replacement 1
STG
12 O ring special 2
STS L 13 Cushion ring gasket 2
LCS 14 Needle gasket 2
No. Part name Quantity
LCG 15 Cardboard box 1
1 Plastic bag 1
LCM Note 1: Cushion ring gasket not included for 2 Package label (S) 1
ø12 to ø40
LCT 3 Hexagon socket head cap bolt 4
Note 2: 4 gaskets will be added for ø80 to ø100
LCY 4 Foot bracket (B) 2
STR2
UCA2 Adjustable full-stroke kit
HCM
Adjustable full-stroke kit
HCA (ø80, ø100)
(ø32 to ø63)
SRL3 SRL3 40 A1 1 set
1
SRG3 1
2
SRM3 Bore size 2
SRT3 (Page 2006 section B ) 3
3
(ø12 to ø25)
MRL2
1 2 3 4 5 6 7 8 9 10 11 12
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC Detailed drawing
SHC Detailed drawing
GLC
Ending
No. Part name Quantity
1 Plastic bag 1
2 Package label (S) 1
3 Square nut 2
4 5 6 7 8 9 10 4 5 6 7 8 9 11 10
4 Shock absorber 1
6 Hexagon socket head set screw 1
7 Plate 1 No. Product name Quantity No. Product name Quantity
8 Adaptor (R) 1 1 Package label (S) 1 7 Square nut 1
9 Adaptor (L) 1 2 Adaptor 1 8 Square nut 1
10 Square nut 1 3 Air mat 9 Square nut 2
11 Square nut 1 4 Plastic bag 1 10 Hexagon socket head cap bolt 4
12 Hexagon socket head cap bolt 4 5 Shock absorber 1 11 Belleville spring 4
Note: Packaging may slightly differ depending on the size. 6 Hexagon socket head set screw 1
2054
SRL3 Series
Floating joint set Intermediate support bracket SCP*2
Floating joint set LB CMK2

2 piece/ CMA2
SRL3 40 Y SRL3 40 L 1 set SCM
SCG
Bore size Bore size SCA2
(Page 2006 section B ) (Page 2006 section B )
SCS
1
CKV2
2 CA/OV2
3 SSD
1
CAT
2 MDC2
MVC
3
SMD2
4
MSD*
5 FC*
No. Part name Quantity STK
1 Package label (S) 1 ULK*
2 Plastic bag 1
JSK/M2
3 Intermediate support bracket 2
JSG
LB1
JSC3
2 piece/
SRL3 32 N 1 set USSD
USC
Bore size JSB3
(Page 2006 section B ) LMB
1
STG
2 STS L
No. Part name Quantity 3
LCS
1 Mount 1 LCG
2 Mount base 1 4
LCM
3 Pin 1 LCT
4 Pan head machine screw with spring washer 1
LCY
5 Mounting bolt 4
STR2
Note: Packaging may slightly differ depending on the size.
UCA2
No. Part name Quantity HCM
1 Package label (S) 1 HCA
2 Plastic bag 1
SRL3
3 Intermediate support bracket 2
4 Plate 1
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
2055
SCP*2 MEMO
CMK2
CMA2
SCM
SCG
SCA2
SCS
CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
2056
Rodless cylinder SRL3-J Series SCP*2
CMK2
CMA2
Full coweling type (with dust cover) SCM
SCG
SCA2
SCS
CKV2
CA/OV2
SSD
Designed for tough conditions. (ø25 to ø63)

CAT
MDC2
MVC
SMD2
MSD*
FC*
Resistant to direct contact with spatter, metal dust and coolants. STK
ULK*
JSK/M2
PAT. PEND
JSG
Overview Features JSC3
USSD
A new option with powerful dust-proof properties has been added Industry's first rodless type with dust proof cover USC
to the rodless cylinder SRL3 Series. By mounting an original Dust proof model with same mounting dimensions and JSB3
metal cover on the standard type, the product can be used safely overall length as standard models LMB
without direct contact from spatter, metal chips, coolant or cutting Aluminum cover resistant to spatter adhesion STG
lubricants. By mounting an original metal cover on the standard STS L
Remove cover from top using only a wrench
LCS
type, the product can be used safely without direct contact from
Sleek design with side cover on both ends LCG
spatter, metal chips, coolant, or cutting lubricants
5 sizes from ø25 to ø63 available LCM
LCT
LCY
Applications STR2
UCA2
Areas exposed to coolant and cutting fluid from machines
HCM
etc
HCA
Areas exposed to metal dust generated by metal processing SRL3
machines.
SRG3
Areas exposed to spatters caused by welding machines SRM3
Where cleanliness is required, such as in food processing SRT3
plants MRL2
MRG2
Other poor environment requiring dust proofing
SM-25
CAC4
UCAC2
Dust proof aluminum cover RCC2

Provides extra protection for seal belt with dust proof belt. MFC
Side cover
SHC
GLC
Table adaptor
Ending
Rodless cylinder
Rodless type
LB-J Bracket
Cover
Cover bracket with mounting
holes compatible with
standard SRL2-LB
Cylinder body
Cylinder body
Side cover Table adaptor

Workpiece mounting dimensions
are compatible with standard SRL3.
2057
Rodless cylinder double acting/full cowling type
SRL3-J Series
SCP*2
CMK2
Bore size: ø25·ø32·ø40·ø50·ø63
CMA2
SCM
SCG
SCA2
SCS
CKV2 Specifications
CA/OV2
Descriptions SRL3-J
SSD
Bore size mm ø25 ø32 ø40 ø50 ø63
CAT
Actuation Double acting
MDC2
Working fluid Compressed air
MVC
SMD2 Max. working pressure MPa 0.7
MSD* Min. working pressure MPa 0.1 0.05
FC* Withstanding pressure MPa 1.05
STK Ambient temperature 5 to 60
ULK* Port size Rc1/8 Rc1/4 Rc3/8
JSK/M2 Stroke tolerance mm + 2.0
(to 1000), + 02.5 (to 3000)
0
JSG Working piston speed mm/s 50 to 2000 (standard port piping) (note 1)
JSC3
Cushion Air cushion
USSD
Lubrication Not required (Use turbine oil Class 1 ISO VG32 if lubricated. Lubricate continuously if lubricated.)
USC
Note 1: Piston speed used with common port piping differs with the stroke. Contact CKD for details.
JSB3
LMB
STG
Allowable energy absorption
STS L
Bore size Cushioned No cushion With shock absorber (initial setpoint)
LCS
(mm) Allowable energy absorption (J) Cushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm)
LCG
ø25 1.40 20.9 0.015 10 9
LCM
ø32 2.57 23.5 0.030 18 13
LCT
ø40 4.27 23.9 0.050 50 16.5
LCY
STR2
ø50 9.13 24.9 0.072 86 21
UCA2 ø63 17.4 29.6 0.138 86 21
HCM
HCA
SRL3
Stroke
SRG3 Equivalent bore size Standard stroke length (mm) Max. stroke length (mm) Min. stroke length(mm)
SRM3 200, 300, 400,
ø25, ø32, ø40,
SRT3 500, 600, 700, 3000 1
ø50, ø63
MRL2 800, 900, 1000
MRG2
Note 1: Intermediate strokes can be manufactured in 1mm increments.
SM-25
CAC4
UCAC2
RCC2 M type switch quantity and min. stroke length (mm)
MFC Switch quantity 1 2 3 4 5 6
Switch model no.
SHC M*V M*H M*V M*H M*V M*H M*V M*H M*V M*H M*V M*H
Bore size (mm)
GLC
ø25 10 10 30 45 (70) 60 90 (120) 90 135 (170) 120 180 (220) 150 225 (270)
Ending ø32 10 10 30 45 60 90 90 135 120 180 150 225
ø40 10 10 30 45 60 90 90 135 120 180 150 225
ø50 15 15 30 45 60 90 90 135 120 180 150 225
ø63 15 15 30 45 60 90 90 135 120 180 150 225
T type switch quantity and min. stroke length (mm)

Switch model no.
Bore size (mm)
ø25 10 10 45 50 (70) 85 100 (120) 125 150 (170) 165 200 (220) 205 250 (270)
ø32 10 10 45 50 85 100 125 150 165 200 205 250
ø40 10 10 45 50 85 100 125 150 165 200 205 250
ø50 10 10 45 50 85 100 125 150 165 200 205 250
ø63 10 10 45 50 85 100 125 150 165 200 205 250
2058
SRL3-J Series
Specifications
1 color/2 color indicator
CMK2
Descriptions CMA2
M2V, M2H M2WV (2 color indicator type) M3H/M3V M3PH/M3PV (custom order) M3WV SCM
SCG
Output method – NPN output PNP output NPN output SCA2
Reed 2 wire MDC2
Descriptions
MOV, MOH M5V and M5H MVC
Power voltage – – MSD*
Load voltage 12/24 VDC 110 VAC 5/12/24 VDC 110 VAC FC*
Load current 5 to 50mA 7 to 20mA 50mA or less 20mA or less STK
Light LED (ON lighting) Without indicator light ULK*
Leakage current 0mA JSK/M2
Note 1: For MO* switch, if load current is within 7 to 20mA, this switch can be used with 24 VAC and 48 VAC. JSG
Note 2: Refer to Ending 1 for other switch specifications. JSC3
USSD
Switch specifications (T type switch) USC
2 Color indicator type
Proximity 2 wire Proximity 3 wire JSB3
Descriptions LMB
Applications PLC PLC, relay STG
Output method - NPN output NPN output STS L
Power voltage - 10 to 28 VDC LCS
Load voltage 10 to 30 VDC 24 VDC ±10% 30 VDC or less LCG
Load current 5 to 20mA (Note 1) 50mA or less LCM
Red/green Red/green Red/green Red/green LCT
Light LED LED LED LED
LCY
STR2
UCA2
Strong magnetic field proof Coolant proof HCM
Proximity 2 wire Proximity 2 wire Proximity 3 wire HCA
Descriptions Descriptions SRL3
T2YD and T2YDT
T2YLH and T2YLV T3YLH and T3YLV SRG3
Applications PLC
Applications PLC PLC, relay SRM3
Light Red/green LED (ON lighting) SRT3
Power voltage – 10 to 28 VDC
Load voltage 24 VDC ±10% MRL2
Load voltage and current 10 to 30 VDC 5 to 20mA 30 VDC 50mA or less or less
Load current 5 to 20mA MRG2
Current consumption – 10mA or less with 24 VDC (when turned ON)
Internal voltage drop 6V or less SM-25
Internal voltage drop 4V or less 0.5V or less
Leakage current 1.0mA or less CAC4
UCAC2
Light Red/green LED (ON lighting) RCC2
Cylinder weight (kg)
MFC
Descriptions Weight when stroke length is 0mm Additional weight SHC
GLC
Bore size Basic type Weight per switch (including bracket) per stroke of 100mm
ø25 2.37 0.37 Ending
Rodless cylinder
Rodless type
ø32 3.34 0.46

ø40 4.78 0.02 0.65
ø50 7.27 0.90
ø63 11.23 1.28
2059
SRL3-J Series
SCP*2 How to order
Symbol Descriptions
CMK2 Without switch
A Mounting style
CMA2 SRL3-J 00 25 B 200 B Bore size (ø) 25 32 40 50 63
SCM With switch 00 Basic type note 7
SCG LJ Axial foot type (common porting)
SRL3-J 00 25 B 200 M0H R B
SCA2 B Bore size
SCS B Bore size
25 ø25
CKV2 32 ø32
CA/OV2 40 ø40
SSD 50 ø50
CAT 63 ø63
A Mounting style C Port thread type
MDC2
C Port thread type Blank Rc thread
MVC
N NPT thread (ø20 and over) (custom order)
SMD2 G G thread (ø20 and over) (custom order)
MSD*
D Cushion
FC* D Cushion
B Both sides cushioned
STK R R side cushioned
ULK* L L side cushioned
JSK/M2 N No cushion
JSG E Stroke length (mm)
E Stroke length
JSC3 Bore size Stroke length Note 1 Custom stroke length
USSD ø25 to ø63 1 to 3000 By 1 mm increment
USC F Switch model no.
F Switch model no.
Contact Reed
JSB3 Lead wire Lead wire Lead
Note 2 Indicator
LMB Axial Radial Line
STG M0H* M0V* 1 color indicator type
2-wire
M5H* M5V* Without indicator light
STS L
M2H* M2V* 1 color indicator type
LCS – M2WV* 2 color indicator type 2-wire
LCG M3H* M3V* 1 color indicator type
LCM Note on model no. selection – M3WV* 2 color indicator type 3-wire
3-wire
Proximity
LCT Note 1: Refer to page 2058 for minimal stroke for models M3PH* M3PV* 1 color indicator type (custom order)
LCY with switches. T2WH* T2WV*
2-wire
Note 2: F Switches not listed on option F are also available. T2YH* T2YV*
STR2 2 color indicator type
(custom order) Refer to Ending 1 for details. T3WH* T3WV*
UCA2 3-wire
Note 3: Standard ø25 models needs to have its cover T3YH* T3YV*
HCM T2YD* - Strong magnetic field proof
removed and full stroke adjustment mounted using 2-wire
HCA a plate nut afterwards. "A3" is a option that will have T2YDT* - (AC magnetic field dedicated)
SRL3 a plate nut for mounting installed beforehand so that T2YLH* T2YLV* 2-wire
Cutting oil switch
SRG3 it can be mounted afterwards without removing the T3YLH* T3YLV* 2-wire
SRM3 cover. *Lead wire length
Note 4: The asterisk (*) following L* and N* indicates the Blank 1m (standard)
SRT3
number of brackets. Indicate "L2" for 00 and "N2" 3 3m (option)
MRL2
for LJ when ordering 2 sets. 5 5m (option)
SM-25 and cushion needle position symbols. G Switch
R One on R side
CAC4 Note 6: We recommend the use of the extension fitting quantity
L One on L side
UCAC2 included in the package when mounting speed D 2 pieces
RCC2 control valves and piping fittings. T 3 pieces
Note 7: Remove the side cover when using the common
MFC 4 4 pieces (fill in quantity for 4 or more)
piping port on the R side.
SHC H Option and accessory
Note 8: Common port (port position R) for ø25 and ø32 are H Option
GLC available only when bracket LJ is selected. Not Accessory Bore size (ø) 25 32 40 50 63
available for mounting style 00. Note 3, Note 4 A Adjustable full-stroke both ends, with shock absorber
Ending
Note 5 A1 Adjustable full-stroke R end only, with shock absorber
SRL3-J-00-25B-200-M0H-R-B Y Floating joint
L* Intermediate support bracket (00)
A Mounting style : Basic type
N* With intermediate support bracket (LJ)
A
B Bore size : ø25mm or equivalent
Blank F (standard) F (standard)

Port position
C Port thread type : Rc thread R R (common port) F note 7, note 8

D Cushion : Both sides cushioned B F B
E Stroke length : 200mm T R (common port) B note 7, note 8
F Switch model no. : Reed MOH D D F
G Switch quantity : One on R side S D D
H Option : Port position F, cushion needle position B
2060
SRL3-J Series
How to order
How to order switch (Refer to page 2053 for parts configuration ) SCP*2
Switch body + mounting bracket (Note 1) Mounting bracket (Note 2) CMK2
CMA2
SRL3 M0H* SRL3 M
SCM
Only switch body
SRL3 T SCG
SW M0H* SCA2
Lead wire holder (Note 3)
SCS
SRL3 MH
CKV2
Switch model no.
Note 1: Lead wire holder is not included in the switch and its mounting bracket. CA/OV2
(Previous page section F )
When a lead wire holder is necessary, place an order separately. SSD
Note 2: M type switch and T type switch has different brackets. CAT
Note 3. Lead wire holder comes in a set of 10 pieces.
MDC2
MVC
SMD2
MSD*
FC*
STK
Discrete shock absorber model no. Cover kit model no. ULK*
JSK/M2
SRL3 40 NCK SRL3-J 40 200 COVER KIT JSG
Bore size Bore size Stroke length JSC3
(Previous page section B ) (Previous page section B ) (Previous page section E ) USSD
(Square nut 1 pc., hex nut for fixing shock absorber 1pc.) USC
Square nut for shock absorber for SRL3-40 is a special design.
Adaptor kit model no.
JSB3
SRL3-J 40 ADAPTOR-KIT LMB
STG
Bore size STS L
Applicable shock absorber model No. (Previous page section B )
LCS
Model no. Applicable shock absorber
LCG
SRL3-J-25 NCK-00-1.2
LCM
SRL3-J-32 NCK-00-2.6 Repair parts model no. LCT
SRL3-J-40 NCK-00-7
SRL3-J-50/63 NCK-00-12 SRL3 40 K 200 LCY
STR2
Bore size Stroke length UCA2
(Previous page section B ) (Previous page section E ) HCM
Refer to page 2009 to 2010 for details of repair parts.
HCA
Floating joint set model no. SRL3
SRL3 40 Y Adjustable full-stroke kit model no. SRG3
SRM3
Bore size SRL3-J 40 A1 (1 set)
SRT3
(Previous page section B )
Bore size MRL2
(Mount, mount base, pin, plain washer, pan head machine (Previous page section B ) MRG2
screw with spring washer or 4 mounting bolts) Refer to a 2073 page for the configurations table. SM-25
CAC4
Discrete intermediate support bracket model no. Mounting bracket model no. UCAC2
00 RCC2
SRL3 40 L (2 piece/1 set) SRL3-J Mounting style LJ 40 MFC
(Bracket 2 piece and mounting bolt 4 pc.) SHC
Bore size Bore size
GLC
LJ Ending
SRL3 32 N (2 piece/1 set)

Rodless cylinder
Rodless type
Bore size
2061
SRL3-J Series
SCP*2 Internal structure and parts list (ø25)
CMK2
CMA2
SCM
SCG
SCA2
SCS
CKV2
CA/OV2
SSD 1 2 Through hole for tools (Note 1)
CAT 12
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
2000 mm stroke and over
JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
LCS
LCG 3 4 5 6 9 10
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2 7 8 11
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC Note 1: Remove the cover and use this hole to tighten with a hex
GLC wrench when mounting this product.
Note 2: When shipping, extension fittings (two pcs.) are attached.
Ending
Parts list
Descriptions Parts name Material Remarks Descriptions Parts name Material Remarks
1 Caution plate (Do not step) Polypropylene 7 Body
2 Hexagon socket head cap bolt Stainless steel 8 Hexagon socket head cap bolt Alloy steel
3 Hexagon socket head cap bolt Stainless steel 9 Table adaptor Aluminum alloy Alumite
4 Cover Aluminum alloy Alumite 10 Table plate Aluminum alloy Alumite
5 Caution plate (pinch caution) Polypropylene 11 Side cover Aluminum alloy Alumite
6 LB-J bracket Aluminum alloy Alumite 12 Table spacer Polyacetal resin
· Refer to pages 2009 to 2010 for internal structure and consumed parts because
they are common with standard SRL3 series.
2062
SRL3-J Series
Internal structure and parts list (ø32 to 63) SCP*2
CMK2
CMA2
SCM
SCG
SCA2
SCS
CKV2
CA/OV2
SSD
1 2 CAT
Through hole for tools (Note 1) MDC2
13
MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2
JSG
2000 mm stroke and over JSC3
USSD
USC
JSB3
LMB
STG
STS L
3 4 5 6 9 10 11
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
7 8 12 SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
Note 1: Remove the cover and use this hole to SHC
tighten with a hex wrench when mounting this product. GLC
Ending
Rodless cylinder
Rodless type
Parts list
1 Caution plate (Do not step) Polypropylene 8 Hexagon socket head cap bolt Alloy steel Galvanizing
3 Hexagon socket head cap bolt Stainless steel 10 Hall plug Polyamide
6 LB-J bracket Aluminum alloy Alumite 13 Table spacer Polyacetal resin
7 Body
· Refer to pages 2009 to 2010 for internal structure and consumed parts because
they are common with standard SRL3 series.
2063
SRL3-J Series
SCP*2 Internal structure and parts list: with adjustable full-stroke shock absorber (ø25)
CMK2
CMA2
SCM
SCG
SCA2
1 2 3 4 5 6 7
SCS
CKV2 22
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
STK 2000 mm stroke and over
ULK*
JSK/M2
JSG
JSC3
USSD
USC
JSB3
8 9 10 20
11 12 19
LMB
STG
STS L
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
13 14 15 16 13 17 18 21
HCA
SRL3
SRG3
SRM3
SRT3 Note 1: When shipping, extension fittings (two pcs.) are attached.
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2 Descriptions Parts name Material Remarks Descriptions Parts name Material Remarks
MFC
1 Caution plate (Do not step) Polypropylene 12 LB-J bracket Aluminum alloy Alumite
SHC
2 Hexagon socket head cap bolt Stainless steel 13 Square nut Alloy steel Blackening
GLC
3 Hexagon socket head cap bolt Alloy steel Galvanizing 14 Adaptor (R) Steel Galvanizing
Ending 4 Square nut Steel Galvanizing 15 Body
5 Square nut Steel Galvanizing 16 Adaptor (L) Steel Galvanizing
6 Shock absorber 17 Hexagon socket head cap bolt Alloy steel Galvanizing
7 Hexagon socket head set screw Alloy steel Galvanizing 18 Hexagon socket head cap bolt Alloy steel Galvanizing
11 Plate Aluminum alloy Alumite 22 Table spacer Polyacetal resin
2064
SRL3-J Series
Internal structure and parts list: with adjustable full-stroke shock absorber (ø32 to 63) SCP*2
CMK2
CMA2
SCM
SCG
SCA2
SCS
3 13 4 5 19
CKV2
CA/OV2
SSD
CAT
6 MDC2
7 MVC
SMD2
MSD*
FC*
2000 mm stroke and over
STK
ULK*
1 2 JSK/M2
JSG
JSC3
USSD
USC
8 9 10 11 12 16 17 JSB3
LMB
STG
STS L
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
13 14 13 15 18
HCA
SRL3
SRG3
SRM3
Note 1: When shipping, extension fittings (two pcs.) are attached. SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
1 Caution plate (Do not step) Polypropylene 11 Adaptor Steel Galvanizing
RCC2
2 Hexagon socket head cap bolt Stainless steel 12 LB-J bracket Aluminum alloy Alumite
MFC
3 Hexagon socket head cap bolt Alloy steel Galvanizing 13 Square nut Steel Galvanizing
SHC
4 Square nut Steel Galvanizing 14 Body GLC
5 Shock absorber 15 Hexagon socket head cap bolt Alloy steel Galvanizing
Ending
6 Square nut Steel Galvanizing 16 Table adaptor Aluminum alloy Alumite
Rodless cylinder
Rodless type
7 Hexagon socket head set screw Alloy steel Galvanizing 17 Table plate Aluminum alloy Alumite
8 Hexagon socket head cap bolt Stainless steel 18 Side cover Aluminum alloy Alumite
9 Cover Aluminum alloy Alumite 19 Table spacer Polyacetal resin
10 Caution plate (pinch caution) Polypropylene
2065
SRL3-J Series
SCP*2 Dimensions (ø25)
CMK2 ø25
CMA2
SCM
SCG
SCA2
SCS
CKV2 B A
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
CA
F
C
D
MSD*
FC*
STK
ULK* S
JSK/M2 C
JSG D
G 4-M
JSC3 U
USSD
USC
JSB3
J
J
LMB
V
H
STG
R
STS L F B
Y
T
LCS
4-øK D
LCG E
4-L E W (LB-J bracket section)
LCM EA Z + stroke length EA (cover bottom surface) common
LCT P N Q + stroke length N P X
LCY R + stroke length

L side R side
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4 Symbol
A B C CA D E EA F G H J K L M
UCAC2 Bore size (mm)
RCC2 SRL3-J-25 100 66 81 91.9 58 28.5 35 20 70 65.5 55 7 M6 depth 9 M5 penetrating
MFC Symbol
N P Q R S T U V W X Y Z
SHC Bore size (mm)
GLC SRL3-J-25 11 1 208 232 111 10 44 77.5 20 63 17 162
Ending Note) SRL3-J has the same mounting dimensions as SRL3-LB (page 2014, 2015)
2066
SRL3-J Series
Double acting/full cowling type
Dimensions SCP*2
ø25 (with switch) CMK2
CMA2
SCM
SCG
SCA2
SCS
SRL3-J-**-**-***-M*H* with cylinder switch (axial lead wire) CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
FC*
PP STK
HD 35.5 RD
ULK*
JSK/M2
SRL3-J-**-**-***-M*V* with cylinder switch (radial lead wire)
JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
LCS
PP
HD 23.5 HD
LCG
LCM
SRL3-J-**-**-***-T*H*(T*W, T*Y, T*YL, T*YD) with cylinder switch (axial lead wire) LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
PA HD PB 3 RD SRT3
PP MRL2
MRG2
SRL3-J-**-**-***-T*V(T*W, T*Y, T*YL) with cylinder switch (radial lead wire) SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
PA
PP HD PB HD
Symbol With switch

PA
ø25 60 56 52 82 86 90 34.3 35 34 33.5 34.5 34.5 36 33 38.4 30.7 27.2
2067
SRL3-J Series
SCP*2 Dimensions
CMK2 ø32 to 63
CMA2
SCM
SCG
SCA2
SCS
CKV2 B A
CA/OV2
SSD
CAT
HB
MDC2
C
D
F
HB
MVC
SMD2
MSD*
FC*
S
STK
C
ULK* G 4-M U
JSK/M2 HB
HC E E HC
JSG
JSC3
USSD
J
J
USC 4-øKF
V
H
HA
JSB3 R Note 2
LMB F B
Y
T
STG 4-øK D W (LB-J bracket section)

4-L (cover bottom surface) common
STS L
EA Z + stroke length EA X
LCS
P N Q + stroke length N P
LCG
R + stroke length
LCM L side R side
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
Note 2: The R port position is not available for the ø32 mounting type “00”.
SRM3
SRT3
MRL2 Symbol
MRG2 A B C D E EA F G H HA HB HC J K KF
Bore size (mm)
SM-25 SRL3-J-32 106 81 102 58 31 36 20 80 71.5 55.5 12 2 61 7 –
CAC4 SRL3-J-40 116 85 116 64 34 38 30 90 81.5 65.5 12 2 67.5 9 14 spot face depth 8.6
UCAC2
SRL3-J-50 120 90 140 84 36 44 30 100 102 80 17 2 85 9 14 spot face depth 8.6
RCC2
SRL3-J-63 136 106 162 95 41 45 40 110 115 93.5 20 2 91 11 17.5 spot face depth 10.8
MFC
Symbol
SHC L M N P Q R S T U V W X Y Z
Bore size (mm)
GLC
SRL3-J-32 M6 depth 9 M6 penetrating 11 1 244 268 134 11 52 85.5 32 72 18.5 196
Ending SRL3-J-40 M8 depth 12 M6 penetrating 9 1 266 286 148 18 64 95.5 36 85 22 210
SRL3-J-50 M8 depth 12 M8 penetrating 9 1 280 300 178 22.5 74 119 45 109 28 212
SRL3-J-63 M10 depth 15 M8 penetrating 12 1 322 348 200 28 96 132 50 129 35 258
Note: SRL3-J has the same mounting dimensions as SRL3-LB (Page 2014, 2015)
2068
SRL3-J Series
Dimensions SCP*2
ø32 to 63 (with switch) CMK2
CMA2
SCM
SCG
SCA2
SCS
SRL3-J-**-**-***-M*H* with cylinder switch (axial lead wire) CKV2
CA/OV2
SSD
CAT
MDC2
MVC
SMD2
MSD*
PP HD 35.5 RD FC*
STK
ULK*
JSK/M2
SRL3-J-**-**-***-M*V* with cylinder switch (radial lead wire)
JSG
JSC3
USSD
USC
JSB3
LMB
STG
PP HD 23.5 HD STS L
LCS
LCG
LCM
SRL3-J-**-**-***-T*H*(T*W, T*Y, T*YL, T*YD) with cylinder switch (axial lead wire) LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
PA HD PB 3 RD
SRM3
PP
SRT3
MRL2
MRG2
SRL3-J-**-**-***-T*V(T*W, T*Y, T*YL) with cylinder switch (radial lead wire) SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
PA HD PB HD
Rodless cylinder
Rodless type
PP
Symbol With switch

PA
ø32 74 70 66 96 100 104 41.3 35 34 33.5 41.5 41.5 43 40 45.4 37.7 34.2
ø40 80 76 72 102 106 110 48.3 35 34 33.5 48.5 48.5 50 47 52.4 44.7 41.2
ø50 79 75 71 101 105 109 56.3 35 34 33.5 56.5 56.5 58 55 60.4 52.7 49.2
ø63 98 94 90 120 124 128 67.3 35 34 33.5 67.5 67.5 69 66 71.4 63.7 60.2
2069
SRL3-J Series
SCP*2 Dimensions: with adjustable full-stroke shock absorber (ø25)
CMK2
CMA2
SCM
SCG
SCA2
SCS
B A
CKV2
CA/OV2
SSD
CAT
HB
MDC2
MVC
F
C
D
SMD2
MSD*
FC*
STK
S
ULK*
C
JSK/M2 G 4-M D
JSG U
JSC3
USSD
USC
JSB3
J
J
V
LMB
H
HA
STG R
F B
Y
T
STS L
LCS 4-øK D
4-L AD E
E W (LB-J bracket section)
LCG Z + stroke length EA (cover bottom surface) common
EA
LCM P N Q + stroke length N P X
LCT R + stroke length
LCY L side R side
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2 Note 1: When shipping, extension fittings (two pcs.) are attached.
MRG2
SM-25
CAC4
UCAC2
RCC2 Symbol
A AD B C D E EA F G H HA HB J K
MFC Bore size (mm)
SHC SRL3-J-25-A 100 50 66 81 58 28.5 35 20 70 65.5 51.5 10 55 7
GLC Symbol
L M N P Q R S T U V W X Y Z
Ending Bore size (mm)
SRL3-J-25-A M6 depth 9 M5 penetrating 11 1 208 232 111 10 44 77.5 20 63 17 162
2070
SRL3-J Series
Dimensions: with adjustable full-stroke shock absorber (ø32 to 63) SCP*2
CMK2
CMA2
SCM
SCG
SCA2
SCS
B A CKV2
CA/OV2
SSD
HB
CAT
MDC2
C
D
HB
F
MVC
SMD2
MSD*
4-M
FC*
G S STK
C
ULK*
U
HC E JSK/M2
E HC HB
JSG
JSC3
USSD
J
4-øKF
V
USC
H
HA
R JSB3
F B
Y
T
LMB
4-øK D W (LB-J bracket section)
4-L AD STG
EA (Bottom of cover)
EA Z + stroke length STS L
P N Q + stroke length N P X LCS
L side R + stroke length R side
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
Symbol RCC2
A AD B C D E EA F G H HA HB HCMAX J K KF L M
Bore size (mm) MFC
SRL3-J-32-A 106 46 81 102 58 31 36 20 80 70.5 55.5 12 6 61 7 – M16 depth 9 M6 penetrating SHC
SRL3-J-40-A 116 51 85 116 64 34 38 30 90 80.5 65.5 12 13 67.5 9 14 spot face depth 8.6 M8 depth 12 M6 penetrating GLC
SRL3-J-50-A 120 53 90 140 84 36 44 30 100 101 80 17 34 85 9 14 spot face depth 8.6 M8 depth 12 M8 penetrating
Ending
SRL3-J-63-A 136 64 106 162 95 41 45 40 110 114 93.5 20 18 91 11 17.5 spot face depth 10.8 M10 depth 15 M8 penetrating
Rodless cylinder
Rodless type
Symbol
N P Q R S T U V W X Y Z
Bore size (mm)
SRL3-J-32-A 11 1 244 268 134 11 52 85.5 32 72 18.5 196
SRL3-J-40-A 9 1 266 286 148 18 64 95.5 36 85 22 210
SRL3-J-50-A 9 1 280 300 178 22.5 74 119 45 109 28 212
SRL3-J-63-A 12 1 322 348 200 28 96 132 50 129 35 258
2071
SRL3-J Series
SCP*2 Dimensions: Mounting style (L J) (ø25)
CMK2
CMA2
SCM
SCG
SCA2
SCS
CKV2
CA/OV2
SSD
CAT
4-øF
MDC2
MVC
SMD2
MSD*
FC*
STK
ULK*
JSK/M2 R
JSG F B
C
JSC3
USSD
D
B A + stroke length B
USC
L + stroke length E
JSB3
LMB
STG
STS L Symbol
A B C D E F L
LCS Bore size (mm)
LCG SRL3-J-LJ-25-A 248 11 10 20 50 7 270
LCM *Standard models and adjustable full-stroke shock absorber models (A*) has the
LCT same dimensions.
LCY
STR2
UCA2 Dimensions: Mounting style (L J) (ø32)
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
4-F
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
R
C
F B
D
E
B A + stroke length B
L + stroke length
Symbol
A B C D E F L
Bore size (mm)
SRL3-J-LJ-32-A 284 11 10 32 64 7 306
*Standard models and adjustable full-stroke shock absorber models (A*) has the
same dimensions.
2072
SRL3-J Series
Other dimensions
Dimensions: extension fitting Cover kit configurations table SCP*2
CMK2
SRL3-J 40 200 COVER KIT CMA2
B SCM
SCG
(Page 2060 section B ) (Page 2060 section D )
A1 A2 R SCA2
SCS
CKV2
1 5
CA/OV2
8
2 SSD
4 CAT
3
MDC2
6 11 MVC
7 9
SMD2
R
H MSD*
FC*
STK
Symbol A1 A2 B R H ULK*
SRL3-J-PF01
No. Parts list Quantity JSK/M2
8 8 28.5 Rc1/8 14 10
1 Hexagon socket head cap bolt 4 JSG
SRL3-J-PF02 11 11 33 Rc1/4 17
2 Hexagon socket head cap bolt 4 JSC3
SRL3-J-PF03 12 12 37 Rc3/8 21
3 Hexagon socket head cap bolt 4 USSD
4 Hexagon socket head cap bolt 4 USC
5 Extension joint 2 JSB3
6 Hall plug 2 LMB
7 Side cover 2 STG
8 Table plate 1 STS L
9 LB-J bracket 2 LCS
10 Table adaptor 1 LCG
LCM
Adjustable full-stroke kit configurations table 11 Cover 1
LCT
Adjustable full-stroke kit LCY
SRL3-J 40 A1 1 set STR2

UCA2
HCM
Bore size
<ø25> (Page 2060 section B ) <ø32 to 63> HCA
1 2 3 4 5 6 7 8 9 10 11 12 SRL3
SRG3
1
SRM3
2
3 SRT3
MRL2
MRG2
SM-25
CAC4
Detailed drawing
UCAC2
RCC2
MFC
SHC
4 5 6 7 8 9 10 GLC
No. Parts list Quantity No. Parts list Quantity Ending

1 Plastic bag 1 1 Package label (S) 1
Rodless cylinder
Rodless type
2 Package label (S) 1 2 Adaptor 1

3 Square nut 2 3 Air mat
4 Shock absorber 1 4 Plastic bag 1
5 Hexagon socket head cap bolt 4 5 Shock absorber 1
6 Hexagon socket head set screw 1 6 Hexagon socket head set screw 1
7 Plate 1 7 Square nut 1
8 Adaptor (R) 1 8 Square nut 1
9 Adaptor (L) 1 9 Square nut 2
10 Square nut 1 10 Hexagon socket head cap bolt 4
11 Square nut 1
2073
SRL3 Series
SCP*2 Rodless cylinder selection guide
CMK2
CMA2
SCM
<Step 1>
SCG 1 Find the static moment.
SCA2 How to find moment
SCS
(Vertical load) W = (N) (Radial moment) M2 = F2 x 2
CKV2
Downward Upward = (N · m) 2
CA/OV2 F2
W
SSD
CAT
MDC2
F2
MVC W
2
SMD2
MSD* (Twist moment) M3 = F3 x 3
(Bending moment) M1 = F1 x 1
FC* = (N · m)
= (N · m) 1 3
STK F1 F3
ULK*
JSK/M2
JSG F1 F3
JSC3
USSD 1
USC 3
JSB3
LMB
STG (Table 2) allowable value
2 Find a rough value of coefficient G according to Table 1. The value in ( ) are for models with mounting bracket.
STS L
Descriptions Wmax. M1max. M2max. M3max.
LCS
<Table 1> Bore size (mm) (N) (N·m) (N·m) (N·m)
LCG Moving distance ø12 30 (15) 1.5 (1) 0.6 (0.3) 0.6 (0.6)
Va (average speed) = (m/s)
LCM Moving time ø16 140 (70) 5 (3.5) 1 (0.5) 1 (1)
ø20 200 (100) 10 (7) 1.5 (0.7) 3 (3)
LCT Va (average speed) Vm (speed at stroke limit) G coefficient ø25 360 (180) 17 (12) 5 (2.5) 10 (10)
LCY (m/s) (m/s) ø32 620 (310) 36 (25) 10 (5) 21 (21)
SRL3
STR2 ø40 970 (485) 77 (54) 23 (11.5) 26 (26)
0.3 To 0.65 9
ø50 1470 (735) 154 (108) 32 (16) 42 (42)
UCA2 0.6 To 1.00 15 ø63 2320 (1160) 275 (193) 52 (26) 76 (76)
HCM 0.9 To 1.30 23 ø80 3500 460 70 100
HCA ø100 5000 750 95 130
1.2 To 2.00 40 ø12 30 (15) 1.5 (1) 0.6 (0.3) 0.4 (0.4)
SRL3 ø16 140 (70) 5 (3.5) 1 (0.5) 0.6 (0.6)
SRG3 ø20 200 (100) 10 (7) 1.5 (0.7) 1 (1)
G coefficient = ø25 360 (180) 17 (12) 5 (2.5) 2 (2)
SRM3
ø32 620 (310) 36 (25) 10 (5) 4 (4)
SRT3 SRL3-G
ø40 810 (485) 41 (41) 18 (11.5) 5 (5)
MRL2 ø50 1440 (735) 76 (76) 32 (16) 9 (9)
ø63 1630 (1160) 98 (98) 51 (26) 12 (12)
MRG2 ø80 3500 351 70 37
SM-25 ø100 4130 386 95 42
CAC4 ø25 350 12 3.5 10
ø32 600 25 7 21
UCAC2 SRL3-J ø40 950 55 17 26
RCC2 ø50 1440 107 23 42
ø63 2280 200 38 76
MFC
SHC
GLC (Table 3) a value
a (m)
Ending Bore size
SRL3, SRL3-G, SRL3-Q or SRL3-GQ SRL3-J
ø12 0.023 –
ø16 0.025 –
ø20 0.028 –
ø25 0.036 0.061
ø32 0.039 0.068
ø40 0.045 0.074
ø50 0.054 0.091
m
ø63 0.060 0.097
ø80 0.081 – a
ø100 0.089 –
2074
SRL3 Series
Selection guide
3 Obtain the dynamic moment generated ty the inertia of the load at the stroke end. SCP*2
CMK2
(Bending moment) M1i = F1i x 1i (F1i = m x 9.8) (Twist moment) M3i = F3i x 3i (F3i = m x 9.8)
CMA2
= (N · m) = (N · m)
SCM
SCG
m m SCA2
F1i F3i
SCS
CKV2
CA/OV2
SSD
CAT
MDC2
4 Select bore size roughly. MVC
SMD2
MSD*
Select bore size roughly.
M1 + M1i x G = (N·m) → (ø ) FC*
STK
M2 = (N· m) → (ø )
ULK*
M3 + M3i x G = (N·m) → (ø )
JSK/M2
W = (N) → (ø ) JSG
E0 = 12 x m x Vm2 = (J) → (ø ) JSC3
W
(m ≒ ) 9.8 USSD
Select the maximum bore size temporally. (Table 4) Allowable energy absorption of SRL3 (Eo) USC
Bore size Integrated air cushion Shock absorber JSB3
ø Model no.
(mm) (J) (J) LMB
ø12 0.03 2.4 NCK-00-0.3-C STG
ø16 0.22 2.4 NCK-00-0.3-C STS L
ø20 0.59 5.7 NCK-00-0.7-C
ø25 1.40 10.0 NCK-00-1.2 LCS
ø32 2.57 18.0 NCK-00-2.6 LCG
ø40 4.27 50.0 NCK-00-7
LCM
ø50 9.13 86.0 NCK-00-12
ø63 17.4 86.0 NCK-00-12 LCT
ø80 33.0 143.0 NCK-00-20 LCY
ø100 57.0 143.0 NCK-00-20
STR2
UCA2
5 Find composite moment at stroke end (MT). HCM
(Confirm if the bore size temporally selected at 4 meets the following formula.) HCA
SRL3
SRG3
MT= M1 + M1i x G + M2 + M3 + M3i x G + W <1
M1max. M2max. M3max. Wmax. SRM3
SRT3
M : Composite moment (must be less than 1)
G : G coefficient MRL2
Wmax. : Max. allowable of W (from table 2) MRG2
M1max. : M1 max. allowable (from table 2) SM-25
M2max. : M2 max. allowable (from table 2) CAC4
M3max. : M3 max. allowable (from table 2)
UCAC2
RCC2
MFC
SHC
GLC
Ending
Rodless cylinder
Rodless type
2075
SRL3 Series
SCP*2 <Step 2>
CMK2
Then increase accuracy of load factor, effective thrust, speed at stroke end, and composite moment value.
CMA2
SCM Find load factor.
SCG F0 : Load factor (Table 5) Friction force coefficient per moment 1/m
= x 100 (%) F0 : A necessary force to of movement a workpiece is caused. (N) Bore size (mm) C1 C2 C3
SCA2 F
F : Cylinder effective thrust (N) (Fig. 1 to 4) ø12 8 27 8
SCS
CKV2 During horizontal operation During vertical operation ø16 7 24 7
CA/OV2 ø20 6 21 6
F0 = F W + F 1 + F 2 + F 3 + F L F0 = W + F1 + F2 + F3 + FL
SSD ø25 5 16 5
CAT note ø32 4 13 4
Fw : W x 0.2 (N) F1 : M 1 x C 1 (N)
MDC2 F2 : M2 x C2 note (N) F3 : M3 x C3 note (N) ø40 4 11 4
MVC FL : Other resistance (such as guide resistance) (N) W : Load (N) ø50 4 9 4
SMD2 Note: The coefficient which compensates the increase of the frictional force which during moment was applied. ø63 3 8 3
MSD* ø80 3 7 3
FC* ø100 3 6 3
STK
ULK* (Table 6) Reference load factor
JSK/M2 Working pressure (MPa) Load factor (%)
JSG 0.2 to 0.3 40
JSC3 0.3 to 0.6 50
USSD 0.6 to 0.7 60
Graph of effective thrust
USC
<Fig1> <Fig2> <Fig3> <Fig4>
JSB3 140 500 2500 5000
LMB 120
STG ø16 400 2000 4000 ø100
ø32
100
STS L ø80
Effective thrust
Effective thrust
Effective thrust
Effective thrust
ø12 ø63
80 300 ø25 1500 3000

LCS ø50
LCG 60 200 ø20
1000 2000
F(N) F(N) F(N) F(N)
LCM ø40
40
LCT 100 500 1000
20
LCY
STR2 0 0 0 0
0.05 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.05 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.05 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.05 0.1 0.2 0.3 0.4 0.5 0.6 0.7
UCA2 Supply pressure P(MPa) Supply pressure P(MPa) Supply pressure P (MPa) Supply pressure P(MPa)
HCM
HCA
SRL3 <Step 3>
SRG3
SRM3 Obtain the stroke end speed (Vm) from<Fig. 3> and G coefficient from the average speed (Va) and load rate obtained in STEP-2.
SRT3 Graph of speed - coefficient G <Fig.3>
MRL2
MRG2 (m/s)
2.0
SM-25
Load factor 10%
CAC4 Load factor 20%
1.5
UCAC2 Load factor 30%
Average speed
RCC2 (Va) m/s Load factor 40% ● Arrow ( → ) in figure shows
MFC 1.0 Load factor 50% Average speed :0.9m/s
Load factor 60%
SHC Load factor :30％
GLC 0.5
Ending Speed at stroke end:1.3m/s
Speed at stroke limit (Vm)
0 G coefficient :22.5
1.0m/s 2.0m/s
is shown.
10
SRL3/Vm-G characteristics
20
G coefficient
30
40
(G)
Graph of speed-G coefficient
G coefficient =
2076
SRL3 Series
Selection guide
<Step 4> SCP*2
CMK2
Confirm the composite moment (MT) with coefficient G found at STEP-3.
CMA2
SCM
M1 + M1i x G = (N · m)
SCG
M2 = (N · m) SCA2
SCS
M3 + M3i x G = (N · m) CKV2
CA/OV2
W = (N)
SSD
CAT
MT = M1 + M1i x G + M2
+ M3 + M3i x G + W
M1max. M2max. M3max. Wmax. MDC2
MVC
MT 1 SMD2
MSD*
Determining bore size (*Refer to the <table 2> on STEP1.) FC*
STK
Confirm cushion performance ULK*
JSK/M2
<Step5> JSG
JSC3
Confirmation of cushion performance
USSD
1 (Table 4) Allowable energy absorption of SRL3 (Eo)
E= x m x Vm2 USC
2 Bore size Integrated air cushion Shock absorber
Model no. JSB3
E : Kinetic energy at workpiece final end (J) (mm) (J) (J)
LMB
m : Load weight (kg) ø12 0.03 2.4 NCK-00-0.3-C
Vm : Piston rush-into the cushion speed (m/s) STG
ø16 0.22 2.4 NCK-00-0.3-C
ø20 0.59 5.7 NCK-00-0.7-C STS L
Confirming allowable colliding energy of shock absorber ø25 1.40 10.0 NCK-00-1.2 LCS
Calculate colliding energy E and weight equivalent to ø32 2.57 18.0 NCK-00-2.6 LCG
colliding object Me according to the formula on the table ø40 4.27 50.0 NCK-00-7 LCM
below, and confirm if Me should not be greater than the ø50 9.13 86.0 NCK-00-12 LCT
allowable values of Fig.4 and also table 4. ø63 17.4 86.0 NCK-00-12 LCY
Allowable value of weight equivalent to colliding object ø80 33.0 143.0 NCK-00-20
STR2
Me and colliding energy E may vary depending on ø100 57.0 143.0 NCK-00-20
UCA2
colliding speed. HCM
The allowable absorption energy differs according to (Fig.4) Allowable value of weight equivalent to colliding object HCA
the collision speed, so if the collision speed is
Vp-Me characteristics (colliding speed-colliding object equivalent weight) SRL3
2000mm/s, make sure that one-third of the maximum
SRG3
absorption energy shown in Table 4 is not exceeded.
1000000 SRM3
When the collision speed is 1000mm/s, make sure that
SRT3
one-half of the maximum absorption energy is not
MRL2
exceeded.
100000 MRG2
Horizontal movement Moving downward Moving upward
SM-25
Colliding object equivalent weight (kg) Me
CAC4
V
m V 10000 UCAC2
Applications m
RCC2
m V MFC
1000 SHC
GLC
Colliding object
Ending
equivalent Me = 2 x E Me =
2xE
Me =
2xE
100
weight V2 V2 V2
Rodless cylinder
Rodless type
Me (kg) NCK-20
Energy 2 NCK-12
E = mV + (F + mg)/St E = mV + (F-mg)/St
2 2
E E = mV + F/St 10
NCK-7
(J) 2 2 2
NCK-2.6
Symbol NCK-1.2
E : Colliding energy J NCK-0.7
1
Me : Colliding object equivalent weight kg NCK-0.3
m : Weight of workpiece kg
NCK-0.1
F : Cylinder thrust N 0.1
V : Colliding speed (m/s) 0.01 0.05 0.1 1 3
Colliding speed (m/s) Vp
St : Shock absorber stroke (m)
g : Gravity acceleration 9.8 (m/s2)
2077
SRL3 Series
SCP*2 <Step 6>
CMK2
CMA2 Bore size determined by cushion performance: øA (Bore size determined on step 5)
SCM
SCG
SCA2 Bore size determined according to load conditions is assumed as øB . (Bore size determined on step 4)
SCS
CKV2
CA/OV2 øA >
= øB Select øA .
SSD
Or
CAT
MDC2
Can be accommodated by using øB and external damper.
MVC
SMD2
MSD*
FC*
STK
øA < øB Select øB .
ULK*
JSK/M2
JSG
JSC3
USSD
USC
JSB3
LMB
STG
STS L
LCS
LCG
LCM
LCT
LCY
STR2
UCA2
HCM
HCA
SRL3
SRG3
SRM3
SRT3
MRL2
MRG2
SM-25
CAC4
UCAC2
RCC2
MFC
SHC
GLC
Ending
2078
SRL3 Series
Selection guide
1 Restriction of vertical load 2 Bent of cylinder tube SCP*2
Long stroke length causes cylinder tube deflection by cylinder W CMK2
own-weight/load. In this case, adjust the intermediate support CMA2
bracket: l to meet the conditions such as support intervals on SCM
the following diagram should be the graph value or less. SCG
(Intermediate support bracket is an auxiliary bracket to prevent SCA2
deflection, not for fixing)
SCS
SRL3-12, SRL3-G-12 (ø12) CKV2
(a) (b)
CA/OV2
0.5
W = 7.5N SSD
0.4 W = 15N CAT
Deflection (mm)
MDC2
0.3 W = 30N
MVC
0.2 SMD2
MSD*
0.1
(c) FC*
0.0 STK
0 200 400 600 800 1000 1200 1400 1600 ULK*
Stroke length (mm) JSK/M2
JSG
SRL3-16, SRL3-G-16 (ø16) JSC3
USSD
0.5 USC
W = 35N
Allowable load for support methods (a), (b), (c) shown above.
0.4 JSB3
Deflection (mm)
700 SRL3 W = 70N LMB

-32 0.3
SRL3-G STG
W = 140N
600 0.2 STS L
LCS
0.1 LCG
500
LCM
0.0
SRL3 0 200 400 600 800 1000 1200 LCT
W load (N)
400 -25
SRL3-G LCY
Stroke length (mm)
STR2
SRL3-20, SRL3-G-20 (ø20)
300 UCA2
SRL3 0.7 HCM
-20 W = 50N
SRL3-G 0.6
200 HCA
SRL3
Deflection (mm)
-16 0.5 W = 100N SRL3

SRL3-G
100 0.4 SRG3
SRL3 W = 200N
-12 0.3 SRM3
SRL3-G
0.2 SRT3
0
500 1000 1500 2000 2500 3000 3500 4000 4500 5000 0.1
MRL2
MRG2
Support interval (mm) 0.0
0 200 400 600 800 1000 1200 1400 SM-25
SRL3-100 CAC4
Stroke length (mm)
5000 UCAC2
SRL3-25, SRL3-G-25 (ø25) RCC2
4500
SRL3-G-100 MFC
1.4
4000 SRL3 W = 90N SHC
-80 1.2
SRL3-G GLC
Deflection (mm)
3500 1.0 W = 180N

Ending
3000 0.8 W = 360N
W load (N)
Rodless cylinder
Rodless type
0.6
2500 SRL3-63
0.4
2000 0.2
SRL3-G-63
SRL3 0.0
1500 -50 0 200 400 600 800 1000 1200 1400 1600 1800 2000
SRL3-G
SRL3-40
1000 Stroke length (mm)
500 SRL3-G-40
0
500 1000 1500 2000 2500 3000 3500 4000 4500 5000
Support interval (mm)
2079
SRL3 Series
Selection guide
SRL3-32, SRL3-G-32 (ø32) SRL3-100, SRL3-G-100 (ø100)
SCP*2
CMK2 1.0 3.0
W = 155N W = 2500N W = 1250N
CMA2 0.8 2.5
Deflection (mm)
Deflection (mm)
SCM W = 5000N
W = 310N 2.0
SCG 0.6
W = 620N 1.5
SCA2 0.4
SCS 1.0
CKV2 0.2 0.5
CA/OV2
0.0 0.0
SSD 0 200 400 600 800 1000 1200 1400 1600 1800 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000
CAT Stroke length (mm) Stroke length (mm)
MDC2
MVC SRL3-40, SRL3-G-40 (ø40)
SMD2
3 Inclination of table
1.4 M1 load
MSD* W = 242N M2 load
1.2
FC*
Deflection (mm)
STK
1.0 W = 485N
ULK* 0.8
W = 970N
JSK/M2 0.6 M3 load
JSG 0.4
JSC3 0.2
USSD 0.0
USC 0 500 1000 1500 2000 2500
SRL3-12 (ø12)
JSB3 Stroke length (mm) The value varies in the range of
LMB 2
STG SRL3-50, SRL3-G-50 (ø50)
( )
STS L
2.5
LCS W = 367N M2 load
Inclination
LCG 2.0
Deflection (mm)
1
LCM W = 735N
1.5
LCT W = 1470N
LCY 1.0
M3 load
STR2 M1 load
0.5
UCA2 0
1 2
HCM 0.0 Moment (N · m)
0 500 1000 1500 2000 2500 3000
HCA
SRL3-16 (ø16)
SRL3 Stroke length (mm) The value varies in the range of
SRG3 2
SRM3 SRL3-63, SRL3-G-63 (ø63)
)
SRT3 3.0
(
MRL2 W = 580N
2.5 M2 load
Inclination
Deflection (mm)
MRG2 W = 1160N
2.0 1
SM-25
CAC4 1.5 W = 2320N
UCAC2 1.0
RCC2 M3 load M1 load
0.5
MFC 0
0.0 1 2 3 4 5
SHC
0 500 1000 1500 2000 2500 3000 3500 Moment (N · m)
GLC
Stroke length (mm) SSRL3-20 (ø20)
Ending
The value varies in the range of
SRL3-80, SRL3-G-80 (ø80) 2
2.5
)
W = 875N
(
2.0 W = 1750N
Deflection (mm)
Inclination
1.5 1
W = 3500N
M2 load
1.0
0.5
M3 load M1 load
0.0 0
0 500 1000 1500 2000 2500 3000 3500 4000 4500 2 4 6 8 10
Moment (N · m)
Stroke length (mm)
2080
SRL3 Series
Selection guide
SRL3-25 (ø25) SRL3-80 (Ø80)
The value varies in the range of The value varies in the range of SCP*2
2 1 CMK2
CMA2
)
)
SCM
(
(
M2 load SCG
Inclination
Inclination
M2 load SCA2
1 0.5
SCS
M3 load CKV2
M3 load
CA/OV2
M1 load
M1 load SSD
0 0 CAT
10 20 30 100 200 300 400
MDC2
SRL3-32 (Ø32) Moment (N · m) SRL3-100 (Ø100) Moment (N · m)
MVC
The value varies in the range of The value varies in the range of
2 1 SMD2
MSD*
)
)
FC*
(
(
STK
Inclination
Inclination
M2 load ULK*
1 M2 load 0.5 JSK/M2
JSG
M3 load JSC3
M3 load
USSD
M1 load M1 load
USC
0 0
10 20 30 500 JSB3
Moment (N · m) Moment (N · m) LMB
SRL3-40 (Ø40) SRL3-G-12 (Ø12)
STG
2 1 STS L
LCS
)
LCG
(
LCM
M2 load
Inclination
M2 load
Inclination
LCT
1 0.5 LCY
STR2
M3 load UCA2
M1 load M3 load HCM
M1 load
0 0 HCA
50 100 150 1 2 SRL3
Moment (N · m) Moment (N · m)
SRL3-50 (Ø50) SRL3-G-16 (Ø16) SRG3
SRM3
2 1 SRT3
MRL2
)
)
MRG2
(
(
SM-25
M2 load
Inclination
Inclination
M2 load CAC4
1 0.5 UCAC2
M3 load RCC2
M1 load MFC
M3 load SHC
M1 load
0 0 GLC
50 100 150 1 2 3 4 5
Ending
SRL3-63 (Ø63) Moment (N · m) SRL3-G-20 (Ø20) Moment (N · m)
Rodless cylinder
Rodless type
2 1
)
)
(
M2 load
Inclination
Inclination
1 0.5
M2 load
M3 load
M1 load
M3 load
M1 load
0 0
100 200 300 2 4 6 8 10
Moment (N · m)
2081
SRL3 Series
Selection guide
SRL3-G-25 (ø25) SRL3-G-80 (ø80)
SCP*2 The value varies in the range of The value varies in the range of
CMK2 2 1
CMA2
)
)
SCM
(
(
SCG
Inclination
Inclination
SCA2
1 0.5
SCS
CKV2
M2 load M2 load
CA/OV2
M3 load M1 load
SSD M1 load M3 load
CAT 0 0
10 20 30 100 200 300 400
MDC2
SRL3-G-32 (ø32) Moment (N · m) SRL3-G-100 (ø100) Moment (N · m)
MVC
SMD2
2 1
MSD*
)
)
FC*
(
(
STK
Inclination
Inclination
ULK*
JSK/M2 1 0.5
JSG
JSC3 M2 load
M2 load M1 load
USSD M3 load
M3 load
USC M1 load
0 0
JSB3 10 20 30 500
LMB Moment (N · m) Moment (N · m)
SRL3-G-40 (ø40)
STG
STS L
2
LCS
)
LCG
(
LCM
Inclination
LCT
LCY 1
STR2
UCA2 M2 load
HCM M3 load
HCA M1 load
0
SRL3 50 100 150
SRG3 Moment (N · m)
SRL3-G-50 (ø50)
SRM3 The value varies in the range of
SRT3 2
MRL2
)
MRG2
(
SM-25
Inclination
CAC4
1
UCAC2
RCC2
MFC M2 load
SHC M3 load
M1 load
GLC 0
50 100 150
Ending Moment (N · m)
SRL3-G-63 (ø63)
2
)
(
Inclination
M2 load
M3 load
M1 load
0
100 200 300
Moment (N · m)
2082

CKD SRL3

Uploaded by

Copyright:

Available Formats

CKD SRL3

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CKD SRL3

Uploaded by

Copyright:

Available Formats

SRL3 Rodless cylinder

Custom stroke length

Axial foot type

Axial foot type

Axial foot type

Both sides cushioned

Adjustable full-stroke both sides with shock absorber

Adjustable full-stroke R side with shock absorber

Adjustable full-stroke L side with shock absorber

Adjustable full stroke bracket to be installed later

Thin floating joint

Intermediate support bracket 00

Intermediate support bracket LB1

Table mounting thread size up

Height adjustment plate

SRL3-J ø25 3000

Double acting basic type

Adjustable stroke both sides

HCM Adjustable stroke R side A1

Variation: Resin guide type, position locking MDC2

SCA2 may be damaged. R1

SRG3 F : Cylinder thrust

Port L (side without locking mechanism)

Branch pipe to the rodless cylinder R side using a tee union,

Supply pressure above the minimum working pres-

adjust in the same way to prevent bouncing. JSG

Apply grease to sliding section of lock lever periodi-

Ending T type switch quantity and min. stroke length (mm)

ø20 0.52 0.54 0.58 0.18

D Cushion : Both sides cushioned

E Stroke length : 200mm R (common port) F

Port position and cushion needle position F (common port)

Note 2: LB1 can not be used if port position is D. (ø25, ø32)

Height adjustment plate

Table mounting thread size up

Intermediate support bracket (00, LB)

HCM Applicable shock absorber model No. SRL3 32 N (2 piece/1 set)

MRL2 SRL3-32 NCK-00-2.6 SRL3 40 A1 (1 set)

Bore size SRL3 40 U

Parts list USSD

ø16 SRL3-16K-* SHC

Note: Specify the kit no. when placing an order.

Symbol With switch

SB V U 2-Q (plug) U V LCT

Symbol With foot bracket (LB) With foot bracket (LB1)

Symbol With switch

Symbol With foot bracket (LB) With foot bracket (LB1)

Symbol With foot bracket

Symbol With switch

USC Allowable energy absorption Stroke length

ø25 1.0 1.1 1.1 0.28

D Cushion : Both sides cushioned R (common port) F

Port position F, cushion needle position F (common port)

Note 2: LB1 can not be used if port position is D. (ø25, ø32)

Port position F, cushion needle position F (standard)

Height adjustment plate

on the previous page.

SRL3 40 C Mounting bracket model no.

MVC 2-Q (plug)

SRL3 SRL3-G---***-TH (TW, T*Y, T2YD) with cylinder switch