Scribd
Upload
369 views14 pages

Lesson 2.2.2 - Sample Problem (Actual Rankine Cycle)

The document provides information to calculate the actual thermal efficiency of a steam power plant operating on a simple Rankine cycle. Steam enters the turbine at 3 MPa and 350°C and is condensed at 75 kPa in the condenser. The pump and turbine have isentropic efficiencies of 85% and 86% respectively. The enthalpy values at each state are calculated and used to determine the actual thermal efficiency is 22.35%.

Uploaded by

suga lin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
369 views14 pages

Lesson 2.2.2 - Sample Problem (Actual Rankine Cycle)

The document provides information to calculate the actual thermal efficiency of a steam power plant operating on a simple Rankine cycle. Steam enters the turbine at 3 MPa and 350°C and is condensed at 75 kPa in the condenser. The pump and turbine have isentropic efficiencies of 85% and 86% respectively. The enthalpy values at each state are calculated and used to determine the actual thermal efficiency is 22.35%.

Uploaded by

suga lin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

ME0005

THERMODYNAMICS 2
• Evaluate and solve problem that is
operating on an actual Rankine cycle.
Consider a steam power plant operating on the simple
Rankine cycle. Steam enters the turbine at 3 MPa and
350C and is condensed in the condenser at a pressure
of 75 kPa. The pump and the turbine have isentropic
efficiency of 85% and 86% respectively. Determine the
actual thermal efficiency of this cycle.
3 350°C T
3 MPA

3 MPA 3
TURBINE 2a
2

BOILER 4
75 kPA
75 kPA
1 4 4a

CONDENSER
2
1 75 kPA
S
3 MPA PUMP
❖ Determine the
following enthalpy
values:
𝑄𝑖𝑛
𝒉𝟏
𝒉𝟐
𝒉𝟑
𝒉𝟒 𝑄𝑜𝑢𝑡
❖ Solving for 𝒉𝟏

𝒌𝑱
𝒉𝟏 = 𝟑𝟖𝟒. 𝟒𝟒
𝒌𝒈

𝑄𝑖𝑛

Source: Thermodynamics: An Engineering


𝑄𝑜𝑢𝑡
Approach 8th Ed. by Cengel & Boles
❖ Solving for 𝒉𝟐
❖ Work pump (Pump)
𝑤𝑃 = ℎ2 − ℎ1 = 𝜐1 (𝑃2 − 𝑃1 )

𝒌𝑱
𝒉𝟐 = 𝟑𝟖𝟕. 𝟒𝟕
𝒌𝒈 𝑄𝑖𝑛

Source: Thermodynamics: An Engineering


𝑄𝑜𝑢𝑡
Approach 8th Ed. by Cengel & Boles
❖ Solving for 𝒉𝟑

𝒌𝑱
𝒉𝟑 = 𝟑𝟏𝟏𝟔. 𝟏
𝒌𝒈

𝑄𝑖𝑛

Source: Thermodynamics: An Engineering


𝑄𝑜𝑢𝑡
Approach 8th Ed. by Cengel & Boles
❖ Solving for 𝒉𝟒

𝒌𝑱
𝒉𝟒 = 𝟐𝟒𝟎𝟑. 𝟎
𝒌𝒈 𝑄𝑖𝑛

Source: Thermodynamics: An Engineering


𝑄𝑜𝑢𝑡
Approach 8th Ed. by Cengel & Boles
𝒌𝑱
ℎ2 − ℎ1 ℎ3 − ℎ4𝑎 𝒉𝟏 = 𝟑𝟖𝟒. 𝟒𝟒
𝜂𝑃 = 𝜂𝑇 = 𝒌𝒈
ℎ2𝑎 − ℎ1 ℎ3 − ℎ4
𝒌𝑱
𝒉𝟐 = 𝟑𝟖𝟕. 𝟒𝟕
387.47 − 384.44 3116.1 − ℎ4𝑎 𝒌𝒈
0.85 = 0.86 =
ℎ2𝑎 − 384.44 3116.1 − 2403.0 𝒌𝑱
𝒉𝟑 = 𝟑𝟏𝟏𝟔. 𝟏
𝒌𝒈
𝒌𝑱 𝒌𝑱
𝒉𝟐𝒂 = 𝟑𝟖𝟖. 𝟎 𝒉𝟒𝒂 = 𝟐𝟓𝟎𝟐. 𝟖𝟑 𝒌𝑱
𝒌𝒈 𝒌𝒈 𝒉𝟒 = 𝟐𝟒𝟎𝟑. 𝟎
𝒌𝒈
𝑊𝑛𝑒𝑡(𝑎𝑐𝑡𝑢𝑎𝑙) 𝒌𝑱
𝑞𝑖𝑛 (𝑎𝑐𝑡𝑢𝑎𝑙) = ℎ3 − ℎ2𝑎 𝑛 𝑇𝐻(𝑎𝑐𝑡𝑢𝑎𝑙) = 𝒉𝟏 = 𝟑𝟖𝟒. 𝟒𝟒
𝒌𝒈
𝑞𝑖𝑛(𝑎𝑐𝑡𝑢𝑎𝑙) = 3116.1 − 388.0 𝑄𝑖𝑛(𝑎𝑐𝑡𝑢𝑎𝑙)
𝒌𝑱 𝒌𝑱
𝒒𝒊𝒏(𝒂𝒄𝒕𝒖𝒂𝒍) = 𝟐𝟕𝟐𝟖. 𝟏 𝒉𝟐 = 𝟑𝟖𝟕. 𝟒𝟕
𝒌𝒈 609.71 𝒌𝒈
𝑛 𝑇𝐻(𝑎𝑐𝑡𝑢𝑎𝑙) = 𝑥100%
2728.1 𝒌𝑱
𝒉𝟑 = 𝟑𝟏𝟏𝟔. 𝟏
𝑞𝑜𝑢𝑡(𝑎𝑐𝑡𝑢𝑎𝑙) = ℎ4𝑎 − ℎ1 𝒌𝒈
𝒏𝑻𝑯(𝒂𝒄𝒕𝒖𝒂𝒍) = 𝟐𝟐. 𝟑𝟓%
𝑞𝑜𝑢𝑡(𝑎𝑐𝑡𝑢𝑎𝑙) = 2502.83 − 384.44 𝒌𝑱
𝒌𝑱 𝒉𝟒 = 𝟐𝟒𝟎𝟑. 𝟎
𝒒𝒐𝒖𝒕(𝒂𝒄𝒕𝒖𝒂𝒍) = 𝟐𝟏𝟏𝟖. 𝟑𝟗 𝒌𝒈
𝒌𝒈

𝒌𝑱
𝒉𝟐𝒂 = 𝟑𝟖𝟖. 𝟎
𝑊𝑛𝑒𝑡(𝑎𝑐𝑡𝑢𝑎𝑙) = 2728.1 − 2118.39 𝒌𝒈

𝒌𝑱 𝒌𝑱
𝑾𝒏𝒆𝒕(𝒂𝒄𝒕𝒖𝒂𝒍) = 𝟔𝟎𝟗. 𝟕𝟏 𝒉𝟒𝒂 = 𝟐𝟓𝟎𝟐. 𝟖𝟑
𝒌𝒈
𝒌𝒈
❖ Actual Work Net

𝑊𝑛𝑒𝑡(𝑎𝑐𝑡𝑢𝑎𝑙) = 𝑊𝑇(𝑎𝑐𝑡𝑢𝑎𝑙) − 𝑊𝑃(𝑎𝑐𝑡𝑢𝑎𝑙) T

3 MPA 3
❖ Actual Work pump (Pump) 2a
2
𝑤𝑃(𝑎𝑐𝑡𝑢𝑎𝑙) = ℎ2𝑎 − ℎ1

❖ Actual Work turbine (Turbine) 75 kPA


1 4 4a
𝑤𝑇(𝑎𝑐𝑡𝑢𝑎𝑙) = ℎ3 − ℎ4𝑎

S
𝑊𝑛𝑒𝑡(𝑎𝑐𝑡𝑢𝑎𝑙) 𝒌𝑱
𝑛 𝑇𝐻(𝑎𝑐𝑡𝑢𝑎𝑙) = 𝒉𝟏 = 𝟑𝟖𝟒. 𝟒𝟒
𝑤𝑃(𝑎𝑐𝑡𝑢𝑎𝑙) = ℎ2𝑎 − ℎ1 𝒌𝒈
𝑄𝑖𝑛(𝑎𝑐𝑡𝑢𝑎𝑙)
𝑤𝑃(𝑎𝑐𝑡𝑢𝑎𝑙) = 388.0 − 384.44 𝒌𝑱
𝒌𝑱 𝒉𝟐 = 𝟑𝟖𝟕. 𝟒𝟕
609.71 𝒌𝒈
𝑤𝑃(𝑎𝑐𝑡𝑢𝑎𝑙) = 𝟑. 𝟓𝟔 𝑛 𝑇𝐻(𝑎𝑐𝑡𝑢𝑎𝑙) = 𝑥100%
𝒌𝒈 2728.1 𝒌𝑱
𝒉𝟑 = 𝟑𝟏𝟏𝟔. 𝟏
𝒌𝒈
𝑤𝑇(𝑎𝑐𝑡𝑢𝑎𝑙) = ℎ3 − ℎ4𝑎 𝒏𝑻𝑯(𝒂𝒄𝒕𝒖𝒂𝒍) = 𝟐𝟐. 𝟑𝟓%
𝑤𝑇(𝑎𝑐𝑡𝑢𝑎𝑙) = 3116.1 − 2502.83 𝒌𝑱
𝒉𝟒 = 𝟐𝟒𝟎𝟑. 𝟎
𝒌𝑱 𝒌𝒈
𝑤𝑇(𝑎𝑐𝑡𝑢𝑎𝑙) = 𝟔𝟏𝟑. 𝟐𝟕
𝒌𝒈
𝒌𝑱
𝒉𝟐𝒂 = 𝟑𝟖𝟖. 𝟎
𝑊𝑛𝑒𝑡(𝑎𝑐𝑡𝑢𝑎𝑙) = 613.27 − 3.56 𝒌𝒈

𝒌𝑱 𝒌𝑱
𝑾𝒏𝒆𝒕(𝒂𝒄𝒕𝒖𝒂𝒍) = 𝟔𝟎𝟗. 𝟕𝟏 𝒉𝟒𝒂 = 𝟐𝟓𝟎𝟐. 𝟖𝟑
𝒌𝒈
𝒌𝒈
❖ Thermodynamics: An Engineering Approach 8th Ed.
by Cengel & Boles

You might also like